Age | Commit message (Expand) | Author |
2022-01-16 | soc/intel/skl: Replace dt `HeciEnabled` by `HECI1 disable` config | Subrata Banik |
2021-12-12 | mainboard: Drop `SataMode` setting from Skylake devicetrees | Felix Singer |
2021-11-15 | Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main" | Hsuan-ting Chen |
2021-08-28 | soc/intel/common: Use CHIPSET_LOCKDOWN_COREBOOT by default | Felix Singer |
2021-05-07 | skylake mainboards: Use enum values for SaGv | Angel Pons |
2021-03-01 | soc/intel/skylake: Clean up SD GPIO handling | Angel Pons |
2020-12-29 | mb/google/poppy/natutilus: Add missing PR dependency | Ricardo Ribalda |
2020-12-14 | soc/intel/skylake: Drop always-zero ProbelessTrace dt setting | Angel Pons |
2020-12-14 | soc/intel/skylake: Drop unreferenced PttSwitch dt setting | Angel Pons |
2020-11-13 | soc/intel/{skl,cnl}: replace PM ACPI timer dt option by Kconfig | Michael Niewöhner |
2020-11-13 | mb/google/poppy: Configure IRQs as level triggered for HID over I2C | Karthikeyan Ramasubramanian |
2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
2020-10-21 | soc/intel,mb/*: get rid of legacy pad macros | Michael Niewöhner |
2020-10-13 | mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devices | Furquan Shaikh |
2020-08-08 | soc/intel/skylake: Enable CIO depending on devicetree configuration | Felix Singer |
2020-08-08 | soc/intel/skylake: Enable SA IMGU depending on devicetree configuration | Felix Singer |
2020-08-08 | soc/intel/skylake: Enable SDXC depending on devicetree configuration | Felix Singer |
2020-08-07 | soc/intel/skylake: Enable thermal subsystem depending on devicetree | Felix Singer |
2020-08-04 | mb/**/{devicetree,overridetree}.cb: Indent with tabs | Angel Pons |
2020-07-29 | soc/intel/skylake: Enable HDA depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable eMMC depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable TraceHub depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SMBus depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable LAN depending on devicetree configuration | Felix Singer |
2020-07-29 | soc/intel/skylake: Enable SATA depending on devicetree configuration | Felix Singer |
2020-07-26 | skylake boards: Factor out copy-pasted PIRQ routes | Angel Pons |
2020-06-28 | gpio_keys: Allow boards to configure different wakeup routes | Furquan Shaikh |
2020-05-18 | skylake: update processor power limits configuration | Sumeet R Pawnikar |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-04-06 | mb/google/poppy: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-04-02 | mb/google/poppy: Add support for ACPI brightness controls | Matt DeVillier |
2020-03-20 | drivers/generic/max98357a: Allow custom _HID from config | Aamir Bohra |
2020-03-18 | mainboard/google: Remove copyright notices | Patrick Georgi |
2019-12-20 | src/mainboard: Remove unused '#include <device/pci.h>' | Elyes HAOUAS |
2019-10-21 | google/poppy: add VBT for nautilus variant | Matt DeVillier |
2019-10-02 | soc/intel: Replace config_of_path() with config_of_soc() | Kyösti Mälkki |
2019-08-02 | soc/intel/skylake: Make use of common thermal code for SKL | Subrata Banik |
2019-07-18 | soc/intel: Use config_of_path(SA_DEVFN_ROOT) | Kyösti Mälkki |
2019-07-09 | arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-class | Kyösti Mälkki |
2019-04-06 | {mb,soc/intel/skylake}: remove unused InternalGfx | Maxim Polyakov |
2019-03-16 | x86/smbios: Untangle system and board tables | Nico Huber |
2019-03-04 | arch/io.h: Add missing includes | Kyösti Mälkki |
2019-03-01 | device/pci: Fix PCI accessor headers | Kyösti Mälkki |
2019-03-01 | soc/intel/skylake: Unify serial IRQ options | Nico Huber |
2019-02-18 | soc/intel/skylake: Use real common code for VMX init | Nico Huber |
2018-11-16 | mb/google/poppy/variants/nautilus: Control GPP_D0 in 2nd SKU only | Seunghwan Kim |
2018-11-15 | ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT config | Karthikeyan Ramasubramanian |
2018-10-05 | mb/google/poppy/variants/nautilus: Change SlowSlewRate settings for LTE sku | Seunghwan Kim |
2018-09-26 | Revert "mb/google/poppy/variants/nautilus: Set grip sensor threshold" | Seunghwan Kim |
2018-09-06 | mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mV | Seunghwan Kim |
2018-08-30 | mb/google/poppy/variants/nautilus: Set grip sensor threshold | Seunghwan Kim |
2018-08-07 | mb/google/poppy/variants/nautilus: Set CABC_EN to GPO high before EDP power on | Seunghwan Kim |
2018-08-07 | mb/google/poppy/variants/nautilus: Add SKU info to SMBIOS | Furquan Shaikh |
2018-07-30 | mb/google/nautilus: Remove obsolete fields | Alan Chiang |
2018-07-30 | mb/google/poppy/variants/nautilus: Set GPP_D21 to high as default | Seunghwan Kim |
2018-07-22 | mb/google/nautilus: Enable camera module NVM | Alan Chiang |
2018-07-22 | mb/google/poppy/variants/nautilus: Add internal pull-up for USB2_OC2# | Seunghwan Kim |
2018-07-11 | skylake: Remove "IshEnable" | li feng |
2018-07-06 | google: Use proper ACPI ID for Semtech chips: STH | Gwendal Grignou |
2018-06-28 | mb/google/poppy/variants/nautilus: Use GPP_B20 to determine SKU | Seunghwan Kim |
2018-06-21 | mb/google/poppy/variants/nautilus: Add SAR sensor device into devicetree.cb | Seunghwan Kim |
2018-06-21 | mb/google/poppy/variants/nautilus: Clear GPP_D0 when entering S5 | Seunghwan Kim |
2018-06-21 | mb/google/poppy/variants/nautilus: Configure for 2nd nautilus SKU | Seunghwan Kim |
2018-06-18 | mb/google/poppy/variants/nautilus: Correct USB OC pin configuration | Seunghwan Kim |
2018-06-06 | soc/intel/common/block: Add common chip config block | Subrata Banik |
2018-06-05 | soc/intel/skylake: Add option to skip coreboot MP init | Subrata Banik |
2018-06-01 | mb/google/nautilus: Add "rotation" control | jimlai |
2018-04-27 | mb/google/poppy,soraka,nautilus: Enable xDCI | Furquan Shaikh |
2018-04-18 | mb/google/poppy/variants: Set VmxEnable to 1 | Furquan Shaikh |
2018-03-28 | soc/intel/skylake: Limit xDCI feature when VBOOT is enabled | Duncan Laurie |
2018-03-21 | mb/google/poppy/variant/nautilus: Enable CABC feature as default | Seunghwan Kim |
2018-03-08 | mb/google/nautilus: Correct LINK FREQ of imx258 sensor | Alan Chiang |
2018-03-07 | mb/google/poppy/variant/nautilus: Configure GPP_B0 for WLAN wake | Seunghwan Kim |
2018-03-05 | mb/google/poppy/variants: Set pch_trip_temp to 75C | Furquan Shaikh |
2018-03-01 | mb/google/poppy/variant/nautilus: Change SlowSlewRateForSa setting | Seunghwan Kim |
2018-02-16 | mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45W | Naresh G Solanki |
2018-02-15 | mb/google/poppy/variant/nautilus: Enable and configure DPTF | Seunghwan Kim |
2018-02-10 | mb/google/poppy/variants/nautilus: set oem_id, oem_table_id fields of acpi_he... | Naveen Manohar |
2018-01-31 | mb/google/poppy/variants/nautilus: Add gpio-keys ACPI node for PENH | Furquan Shaikh |
2018-01-30 | chromeec: Decouple EC tablet event and TBMC device | Furquan Shaikh |
2018-01-26 | mb/google/poppy/variants/nautilus: Update camera power enable GPIOs | Furquan Shaikh |
2018-01-17 | mb/google/nautilus: Add MIPI camera asl files for IMX258 and DW9807 | Andy Yeh |
2018-01-12 | mb/google/poppy/variants/nautilus: enable digitizer pen device | Seunghwan Kim |
2017-12-22 | soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support | Divya Chellap |
2017-12-20 | mb/google/poppy/variants/nautilus: Change USB2 phy setting | sh.kim |
2017-12-19 | mb/google/poppy/variants/nautilus: Enable AER and LTR for root port 1 | Furquan Shaikh |
2017-12-19 | mb/google/poppy: Configure GPP_F3 as NC | Furquan Shaikh |
2017-12-11 | google/nautilus: Add Maxim98357a support | Naveen Manohar |
2017-12-11 | mb/google/poppy/variants/nautilus: add SPK DMIC nhlt support | Naveen Manohar |
2017-12-07 | mb/google/poppy: Add support for DDR4 memory | Furquan Shaikh |
2017-12-07 | mb/google/poppy/variants/nautilus: Fix memory params | Furquan Shaikh |
2017-12-06 | mb/google/poppy: Remove variant_cros_gpios from variants | Furquan Shaikh |
2017-12-06 | mb/google/poppy: Add config option for camera ACPI support | Furquan Shaikh |
2017-12-05 | mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep Sx | Furquan Shaikh |
2017-11-30 | mb/google/poppy/variants/nautilus: Disable DPTF | Furquan Shaikh |
2017-11-30 | mb/google/nautilus: add synaptics touch screen support | Chris Wang |
2017-11-29 | mb/google/poppy/variants/nautilus: Disable camera devices | Furquan Shaikh |
2017-11-29 | mb/google/poppy: Add variant support for camera asl | Furquan Shaikh |
2017-11-28 | mb/google/poppy/variants/nautilus: set I2C speed to 400KHz | Chris Wang |