Age | Commit message (Expand) | Author |
2018-09-06 | mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mV | Seunghwan Kim |
2018-08-07 | mb/google/poppy: Add variant callback for romstage GPIO configuration | Furquan Shaikh |
2018-07-11 | skylake: Remove "IshEnable" | li feng |
2018-06-06 | mb/google/poppy/variants/nami: Fix Elan touchscreen power off sequence | Shelley Chen |
2018-06-06 | soc/intel/common/block: Add common chip config block | Subrata Banik |
2018-06-05 | soc/intel/skylake: Add option to skip coreboot MP init | Subrata Banik |
2018-04-27 | mb/google/poppy,soraka,nautilus: Enable xDCI | Furquan Shaikh |
2018-04-24 | compiler.h: add __weak macro | Aaron Durbin |
2018-04-18 | mb/google/poppy/variants: Set VmxEnable to 1 | Furquan Shaikh |
2018-03-28 | soc/intel/skylake: Limit xDCI feature when VBOOT is enabled | Duncan Laurie |
2018-03-26 | mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF method | Seunghwan Kim |
2018-03-21 | mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_t | Zhuohao Lee |
2018-03-19 | mb/google/poppy: Config GPIO for DMIC by different sku id | amanda_hwang |
2018-03-14 | mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENH | Nicolas Boichat |
2018-03-08 | mb/google/poppy : Get SKU_ID from EC for Nami/Vayne | amanda_hwang |
2018-03-05 | mb/google/poppy: Allow use of optional secondary SPD | Furquan Shaikh |
2018-03-05 | mb/google/poppy/variants: Set pch_trip_temp to 75C | Furquan Shaikh |
2018-02-16 | mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45W | Naresh G Solanki |
2018-02-06 | mb/google/nautilus: Work around the power issue of MIPI and USB cameras | Andy Yeh |
2018-01-17 | mb/google/poppy: Move PMIC specific objects to appropriate scope | Rizwan Qureshi |
2018-01-17 | mb/google/poppy: Split ports and endpoints config for CIO2 | Rizwan Qureshi |
2018-01-12 | mb/google/poppy: Remove digitizer reset control from ACPI | Furquan Shaikh |
2018-01-09 | mb/google/poppy: Add internal pull-up on pen eject signal | Furquan Shaikh |
2017-12-22 | soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support | Divya Chellap |
2017-12-19 | mb/google/poppy: Configure WWAN gpios | Furquan Shaikh |
2017-12-19 | mb/google/poppy: Configure GPP_B0 for WLAN wake | Furquan Shaikh |
2017-12-19 | mb/google/poppy: Configure pen reset and eject lines | Furquan Shaikh |
2017-12-19 | mb/google/poppy: Configure GPP_B8 for WLAN_PE_RST | Furquan Shaikh |
2017-12-19 | mb/google/poppy: Configure GPP_F3 as NC | Furquan Shaikh |
2017-12-07 | mb/google/poppy: Add support for DDR4 memory | Furquan Shaikh |
2017-12-06 | mb/google/poppy: Disable SPI TPM | Furquan Shaikh |
2017-12-05 | mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep Sx | Furquan Shaikh |
2017-11-29 | mb/google/poppy: Add variant support for camera asl | Furquan Shaikh |
2017-11-09 | mb/google/{poppy,nautilus,soraka}: Disable deep S3 | Furquan Shaikh |
2017-10-19 | mb/google/poppy: Log EC events during S0ix resume | Furquan Shaikh |
2017-10-09 | skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPI | Furquan Shaikh |
2017-09-26 | mb/google/*: Use newly added Chrome EC boardid function | Furquan Shaikh |
2017-09-21 | mb/google/{poppy,soraka}: Enable LTR for Root port | Rizwan Qureshi |
2017-09-15 | mb/google/poppy: enable AER for PCIe root port 0 | Rizwan Qureshi |
2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
2017-09-05 | mb/google/soraka: Camera PMIC run time power control | Naresh G Solanki |
2017-08-28 | mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
2017-08-21 | mainboard/google/poppy: Update VR config settings | Furquan Shaikh |
2017-08-21 | mainboard/google/poppy: Remove MPS IMPV8 workaround | Furquan Shaikh |
2017-08-11 | mb/google/poppy: Update PL2 settings | Sumeet Pawnikar |
2017-07-23 | mainboard/google/{poppy,soraka}: Enable S0ix | Rajat Jain |
2017-07-01 | mainboards: Remove unused EC event for thermal overload | Duncan Laurie |
2017-06-19 | mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cb | V Sowmya |
2017-06-14 | mainboard/google/{poppy,soraka}: Disable unused GSPI1 interface | Furquan Shaikh |
2017-06-14 | mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI node | Furquan Shaikh |
2017-06-07 | mainboard/google/poppy: Add support for ELAN device | Furquan Shaikh |
2017-06-04 | mb/google/poppy: Update camera sensor | Naresh G Solanki |
2017-06-01 | mainboard/google/poppy: Enable H1 I2C TPM | Furquan Shaikh |
2017-05-31 | mainboard/google/poppy: Power down camera rails when suspending | Furquan Shaikh |
2017-05-26 | mainboard/google/poppy: Add PowerResource for touchscreen device | Furquan Shaikh |
2017-05-05 | mb/google/poppy: Add eMMC as thermal sensor | Sumeet Pawnikar |
2017-05-05 | mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASK | Furquan Shaikh |
2017-05-03 | mainboard/google/poppy: Add support for cr50 I2C TPM | Furquan Shaikh |
2017-05-03 | mainboard/google/poppy: Update GPIO table for next build | Furquan Shaikh |
2017-04-27 | google/poppy: Enable PD MCU device | Shamile Khan |
2017-04-19 | mainboard/google/poppy: Provide nhlt variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide memory configuration variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide cros_gpio variant API | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Add variant API for board_id and gpio | Furquan Shaikh |
2017-04-19 | mainboard/google/poppy: Provide baseboard and variant concepts | Furquan Shaikh |