| Age | Commit message (Expand) | Author |
|---|
| 2020-12-16 | mb/google/poppy: Fix race condition in acpi camera_pmic | Ricardo Ribalda |
| 2020-12-14 | soc/intel/skylake: Drop always-zero ProbelessTrace dt setting | Angel Pons |
| 2020-12-14 | soc/intel/skylake: Drop unreferenced PttSwitch dt setting | Angel Pons |
| 2020-11-13 | soc/intel/{skl,cnl}: replace PM ACPI timer dt option by Kconfig | Michael Niewöhner |
| 2020-10-26 | mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable` | Michael Niewöhner |
| 2020-10-21 | soc/intel,mb/*: get rid of legacy pad macros | Michael Niewöhner |
| 2020-10-13 | mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devices | Furquan Shaikh |
| 2020-09-06 | mb/*: devicetree: drop now unneeded USBx_PORT_EMPTY | Michael Niewöhner |
| 2020-08-08 | soc/intel/skylake: Enable CIO depending on devicetree configuration | Felix Singer |
| 2020-08-08 | soc/intel/skylake: Enable SA IMGU depending on devicetree configuration | Felix Singer |
| 2020-08-08 | soc/intel/skylake: Enable SDXC depending on devicetree configuration | Felix Singer |
| 2020-08-07 | soc/intel/skylake: Enable thermal subsystem depending on devicetree | Felix Singer |
| 2020-07-29 | soc/intel/skylake: Enable HDA depending on devicetree configuration | Felix Singer |
| 2020-07-29 | soc/intel/skylake: Enable eMMC depending on devicetree configuration | Felix Singer |
| 2020-07-29 | soc/intel/skylake: Enable TraceHub depending on devicetree configuration | Felix Singer |
| 2020-07-29 | soc/intel/skylake: Enable SMBus depending on devicetree configuration | Felix Singer |
| 2020-07-29 | soc/intel/skylake: Enable LAN depending on devicetree configuration | Felix Singer |
| 2020-07-29 | soc/intel/skylake: Enable SATA depending on devicetree configuration | Felix Singer |
| 2020-07-26 | skylake boards: Factor out copy-pasted PIRQ routes | Angel Pons |
| 2020-06-28 | gpio_keys: Allow boards to configure different wakeup routes | Furquan Shaikh |
| 2020-05-18 | skylake: update processor power limits configuration | Sumeet R Pawnikar |
| 2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
| 2020-04-06 | mb/google/poppy: Use SPDX for GPL-2.0-only files | Angel Pons |
| 2020-04-02 | mb/google/poppy: Add support for ACPI brightness controls | Matt DeVillier |
| 2020-03-18 | mainboard/google: Remove copyright notices | Patrick Georgi |
| 2019-12-02 | mb/google/poppy: Remove useless ifs around voltage and GPIO direction configu... | Sakari Ailus |
| 2019-12-02 | mb/google/poppy: Remove redundant mutex | Sakari Ailus |
| 2019-12-02 | mb/google/poppy: Rework OV13858 power on sequence | Sakari Ailus |
| 2019-12-02 | mb/google/poppy: Rework OV5670 power on sequence | Sakari Ailus |
| 2019-12-02 | mb/google/poppy: Power on PMIC before accessing its opregion | Sakari Ailus |
| 2019-12-02 | mb/google/poppy: Declare output GPIOs as pull-downs | Sakari Ailus |
| 2019-08-02 | soc/intel/skylake: Make use of common thermal code for SKL | Subrata Banik |
| 2019-04-06 | {mb,soc/intel/skylake}: remove unused InternalGfx | Maxim Polyakov |
| 2019-03-01 | soc/intel/skylake: Unify serial IRQ options | Nico Huber |
| 2019-02-18 | soc/intel/skylake: Use real common code for VMX init | Nico Huber |
| 2018-10-29 | mb/google/poppy/variants/nami: Add field to identify single channel DDR | Shelley Chen |
| 2018-10-11 | mb/google/poppy: Allow variants to provide event info at runtime | Furquan Shaikh |
| 2018-10-08 | Move compiler.h to commonlib | Nico Huber |
| 2018-09-06 | mb/google/poppy/variants/nautilus: Bump VCC_SA voltage offset 75mV | Seunghwan Kim |
| 2018-08-07 | mb/google/poppy: Add variant callback for romstage GPIO configuration | Furquan Shaikh |
| 2018-07-11 | skylake: Remove "IshEnable" | li feng |
| 2018-06-06 | mb/google/poppy/variants/nami: Fix Elan touchscreen power off sequence | Shelley Chen |
| 2018-06-06 | soc/intel/common/block: Add common chip config block | Subrata Banik |
| 2018-06-05 | soc/intel/skylake: Add option to skip coreboot MP init | Subrata Banik |
| 2018-04-27 | mb/google/poppy,soraka,nautilus: Enable xDCI | Furquan Shaikh |
| 2018-04-24 | compiler.h: add __weak macro | Aaron Durbin |
| 2018-04-18 | mb/google/poppy/variants: Set VmxEnable to 1 | Furquan Shaikh |
| 2018-03-28 | soc/intel/skylake: Limit xDCI feature when VBOOT is enabled | Duncan Laurie |
| 2018-03-26 | mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF method | Seunghwan Kim |
| 2018-03-21 | mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_t | Zhuohao Lee |
| 2018-03-19 | mb/google/poppy: Config GPIO for DMIC by different sku id | amanda_hwang |
| 2018-03-14 | mb/google/poppy/variants/baseboard: Add gpio-keys ACPI node for PENH | Nicolas Boichat |
| 2018-03-08 | mb/google/poppy : Get SKU_ID from EC for Nami/Vayne | amanda_hwang |
| 2018-03-05 | mb/google/poppy: Allow use of optional secondary SPD | Furquan Shaikh |
| 2018-03-05 | mb/google/poppy/variants: Set pch_trip_temp to 75C | Furquan Shaikh |
| 2018-02-16 | mb/google/{soraka,poppy,nautilus}: Set psys_pmax to 45W | Naresh G Solanki |
| 2018-02-06 | mb/google/nautilus: Work around the power issue of MIPI and USB cameras | Andy Yeh |
| 2018-01-17 | mb/google/poppy: Move PMIC specific objects to appropriate scope | Rizwan Qureshi |
| 2018-01-17 | mb/google/poppy: Split ports and endpoints config for CIO2 | Rizwan Qureshi |
| 2018-01-12 | mb/google/poppy: Remove digitizer reset control from ACPI | Furquan Shaikh |
| 2018-01-09 | mb/google/poppy: Add internal pull-up on pen eject signal | Furquan Shaikh |
| 2017-12-22 | soc/intel/skylake: Add PcieRpClkSrcNumber UPD configuartion support | Divya Chellap |
| 2017-12-19 | mb/google/poppy: Configure WWAN gpios | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure GPP_B0 for WLAN wake | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure pen reset and eject lines | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure GPP_B8 for WLAN_PE_RST | Furquan Shaikh |
| 2017-12-19 | mb/google/poppy: Configure GPP_F3 as NC | Furquan Shaikh |
| 2017-12-07 | mb/google/poppy: Add support for DDR4 memory | Furquan Shaikh |
| 2017-12-06 | mb/google/poppy: Disable SPI TPM | Furquan Shaikh |
| 2017-12-05 | mb/google/poppy,nautilus,soraka: Disable PD on AC_PRESENT in deep Sx | Furquan Shaikh |
| 2017-11-29 | mb/google/poppy: Add variant support for camera asl | Furquan Shaikh |
| 2017-11-09 | mb/google/{poppy,nautilus,soraka}: Disable deep S3 | Furquan Shaikh |
| 2017-10-19 | mb/google/poppy: Log EC events during S0ix resume | Furquan Shaikh |
| 2017-10-09 | skylake mainboards: Use PAD_CFG_GPI_GPIO_DRIVER instead of PAD_CFG_GPI | Furquan Shaikh |
| 2017-09-26 | mb/google/*: Use newly added Chrome EC boardid function | Furquan Shaikh |
| 2017-09-21 | mb/google/{poppy,soraka}: Enable LTR for Root port | Rizwan Qureshi |
| 2017-09-15 | mb/google/poppy: enable AER for PCIe root port 0 | Rizwan Qureshi |
| 2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
| 2017-09-05 | mb/google/soraka: Camera PMIC run time power control | Naresh G Solanki |
| 2017-08-28 | mainboard/google/poppy: Tune I2C params (hcnt, lcnt, hold time) | Furquan Shaikh |
| 2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
| 2017-08-21 | mainboard/google/poppy: Update VR config settings | Furquan Shaikh |
| 2017-08-21 | mainboard/google/poppy: Remove MPS IMPV8 workaround | Furquan Shaikh |
| 2017-08-11 | mb/google/poppy: Update PL2 settings | Sumeet Pawnikar |
| 2017-07-23 | mainboard/google/{poppy,soraka}: Enable S0ix | Rajat Jain |
| 2017-07-01 | mainboards: Remove unused EC event for thermal overload | Duncan Laurie |
| 2017-06-19 | mainboard/google/{poppy,soraka}: Remove MIPI camera support from devicetree.cb | V Sowmya |
| 2017-06-14 | mainboard/google/{poppy,soraka}: Disable unused GSPI1 interface | Furquan Shaikh |
| 2017-06-14 | mainboard/google/{poppy,soraka}: Enable generation of SPI TPM ACPI node | Furquan Shaikh |
| 2017-06-07 | mainboard/google/poppy: Add support for ELAN device | Furquan Shaikh |
| 2017-06-04 | mb/google/poppy: Update camera sensor | Naresh G Solanki |
| 2017-06-01 | mainboard/google/poppy: Enable H1 I2C TPM | Furquan Shaikh |
| 2017-05-31 | mainboard/google/poppy: Power down camera rails when suspending | Furquan Shaikh |
| 2017-05-26 | mainboard/google/poppy: Add PowerResource for touchscreen device | Furquan Shaikh |
| 2017-05-05 | mb/google/poppy: Add eMMC as thermal sensor | Sumeet Pawnikar |
| 2017-05-05 | mainboard/google/poppy: Enable MODE_CHANGE event in SCI_MASK | Furquan Shaikh |
| 2017-05-03 | mainboard/google/poppy: Add support for cr50 I2C TPM | Furquan Shaikh |
| 2017-05-03 | mainboard/google/poppy: Update GPIO table for next build | Furquan Shaikh |
| 2017-04-27 | google/poppy: Enable PD MCU device | Shamile Khan |
| 2017-04-19 | mainboard/google/poppy: Provide nhlt variant API | Furquan Shaikh |
