summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus/variants
AgeCommit message (Expand)Author
2018-10-05mb/google/octopus: adjust Bobba I2C CLK under 400KHzPan Sheng-Liang
2018-10-01mb/google/octopus: Operate touchpad I2C CLK in specChris Zhou
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
2018-09-26mb/google/octopus: Touchpad I2C CLK (405.25KHz)over spec(＜400KHz)peichao.wang
2018-09-26mb/google/octopus: Close unused I2C bus 7 include SCL and SDA for PhaserPeichao Wang
2018-09-21mb/google/octopus: Create ampton variantJustin TerAvest
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
2018-09-06mb/google/octopus: Configure H1 interrupt pad using Rx level configFurquan Shaikh
2018-09-06mb/google/octopus: Enable TBMC deviceAmanda Huang
2018-08-30mb/google/octopus: Add missing IOstandy settings.Shamile Khan
2018-08-28mb/google/octopus/variants/meep: Add weida touchscreen supportTony Huang
2018-08-27mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
2018-08-27mb/google/octopus: add Digitizer and Synaptics Touchpad for bobbaPan Sheng-Liang
2018-08-23mb/google/octopus/var/meep: Update GPIO config for meepWisley Chen
2018-08-22mb/google/octopus/variants/bobba: Apply new GPIO configs for bid >= 2Furquan Shaikh
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
2018-08-14mb/google/octopus/var/bobba: Update GPIO config for bobba bid >= 1Justin TerAvest
2018-08-13google/bobba: Add Raydium touch screen supportPan Sheng-Liang
2018-08-13mb/google/octopus/variants/fleex: Set up DPTF tableJohn Su
2018-08-12mb/google/octopus: Do not configure IOStandby for WLAN_PE_RSTFurquan Shaikh
2018-08-12mb/google/octopus: Use correct chip for CNVi deviceFurquan Shaikh
2018-08-12mb/google/octopus: Disable unused I2C2 in devicetreeFurquan Shaikh
2018-08-12mb/google/octopus/var/fleex: Update GPIO config for fleex bid >= 1Furquan Shaikh
2018-08-10mb/google/octopus: add support for new shared memory configAaron Durbin
2018-08-09mb/google/octopus: remove disable_periodic_retraining optionsAaron Durbin
2018-08-06mb/google/octopus/variants/baseboard: Update Power Limit1Sumeet Pawnikar
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
2018-07-31mb/google/octopus: add lpddr4 skus for new memory sourcesnickchen
2018-07-30mb/google/octopusi/variants/bip: Fix unused pins and those with external term...Furquan Shaikh
2018-07-26mb/google/octopus/variants/phaser: Provide override GPIO configFurquan Shaikh
2018-07-26mb/google/octopus: Use newly added gpio_configure_pads_with_overrideFurquan Shaikh
2018-07-26mb/google/octopus: update phaser touchscreen enable gpioAaron Durbin
2018-07-26mb/google/octopus: add variant devicetree update callbackAaron Durbin
2018-07-26mb/google/octopus: remove unused variant_board_id()Aaron Durbin
2018-07-25mb/google/octopus: Fix unused pins and those with external terminationsFurquan Shaikh
2018-07-18mb/google/octopus/variants/baseboard: Udpate CPU critical tempSumeet Pawnikar
2018-07-18mb/google/octopus: Create meep variantJustin TerAvest
2018-07-12mb/google/octopus/variants/yorp: Enable TBMC deviceFurquan Shaikh
2018-07-12mb/google/octopus: Enable TBMC device only for phaserFurquan Shaikh
2018-07-06mb/google/octopus: Enable tablet modeJustin TerAvest
2018-06-28mb/google/octopus: Create bobba variantJustin TerAvest
2018-06-25mb/google/octopus: Use the newly added override devicetree featureFurquan Shaikh
2018-06-25mb/google/octopus/variants/baseboard: Update DPTF parametersSumeet Pawnikar
2018-06-20mb/google/octopus: Configure EC_IN_RW correctlyFurquan Shaikh
2018-06-20mb/google/octopus: Enable Synaptics touchpad devicewuxy
2018-06-18mb/google/octopus: Enable Synaptics touchscreen deviceFurquan Shaikh
2018-06-18mb/google/octopus: Create fleex variantJustin TerAvest
2018-06-15soc/intel/{glk,apl} and mainboards: Configure LPC_CLKRUN# pin as GPIO for S0ixHannah Williams
2018-06-07mb/google/octopus: Fix GPIO to GPE mappings in devicetreeFurquan Shaikh
2018-06-06mb/google/octopus: Update GPIOs as per latest schematicsFurquan Shaikh
2018-06-06mb/google/octopus: Fix invalid IOSSTATE settings for 1.8V pinsShamile Khan
2018-06-06soc/intel/common/block: Add common chip config blockSubrata Banik
2018-06-06mb/google/octopus: Enable wake-over-wifi for octopus variantsFurquan Shaikh
2018-06-04mb/google: Get rid of whitespace before tabElyes HAOUAS
2018-06-01mb/google/octopus: Enable RT5682 headset codec for BIP boardNaveen Manohar
2018-05-28soc/intel/apollolake: Don't use pulldowns in standby state for 1.8/3.3V pins.Shamile Khan
2018-05-21mb/google/octopus: Add devicetree for BipJustin TerAvest
2018-05-19mb/google/octopus: enable xdci controllerJagadish Krishnamoorthy
2018-05-18mb/google/octopus: Disable BT before S5 entryHannah Williams
2018-05-11mb/google/octopus: Ignore standby state for DMIC pinsShamile Khan
2018-05-02mb/google/octopus: Configure pins to reflect delta w.r.t yorpShamile Khan
2018-04-30mb/google/octopus: Create phaser variantJustin TerAvest
2018-04-30mb/google/octopus: Fix crossystem wpsw_cur errorHannah Williams
2018-04-28mb/google/octopus: Enable pull on ESPI_IO1 lineFurquan Shaikh
2018-04-25mb/google/octopus: Disable PCIE NPK deviceShaunak Saha
2018-04-24compiler.h: add __weak macroAaron Durbin
2018-04-21mb/google/bip: Add GPIO configuration settingsShamile Khan
2018-04-16mb/google/octopus: Add Write Protect GPIO to cros_gpiosHannah Williams
2018-04-09mb/google/octopus: Enable EC wakeShaunak Saha
2018-04-09mb/google/octopus/variants/baseboard: Add DPTF parametersSumeet Pawnikar
2018-04-06mb/google/octopus: Edge trigger cr50 interruptJustin TerAvest
2018-04-06mb/google/octopus/variants/baseboard: Enable DPTF supportSumeet Pawnikar
2018-04-04mb/google/octopus/variants/baseboard: Set PL1 and PL2 valueSumeet Pawnikar
2018-04-02mb/google/octopus: Fix Trackpad interrupt GPIO configHannah Williams
2018-04-02mb/google/octopus: Make PMC I2C pads IOSTANDBY_IGNOREHannah Williams
2018-04-01mb/google/octopus: update SSP port and DMIC 4CH nhlt supportM Naveen
2018-03-30mb/google/octopus: Enable i2c4 which is the root port for audio codecShamile Khan
2018-03-29mb/google/octopus: Fix wifi configurationFurquan Shaikh
2018-03-27mb/google/octopus: Remove emmc tuning parameters from devicetreeFurquan Shaikh
2018-03-26mb/octopus: Set PNP config to PNP_PERF_POWERShaunak Saha
2018-03-22mb/google/octopus: Add CLKREQ and de-emphasis settings for PCIe Wi-FIShamile Khan
2018-03-21mb/google/octopus: Create bip variantJustin TerAvest
2018-03-21mb/google/octopus: Enable TPM on GSPIRavi Sarawadi
2018-03-19mb/google/octopus: Configure PERST_0 pinJustin TerAvest
2018-03-19mb/google/octopus: Fix GPIO config for DRAM_IDsJustin TerAvest
2018-03-19mb/google/octopus: Configure PCH_WP_OD early.Justin TerAvest
2018-03-17mb/google/octopus: Do not configure GPIO_149 as GPOFurquan Shaikh
2018-03-15mb/google/octopus: Enable audio components.Shamile Khan
2018-03-13mb/google/octopus: Add yorp variantJustin TerAvest
2018-03-12mb/google/octopus: Fix lpddr4 skusJustin TerAvest
2018-03-08mb/google/octopus: Add gpio configs for communitiesShaunak Saha
2018-03-08mb/google/octopus: Add device tree settingsShamile Khan
2018-02-28mb/google/octopus: Add LPDDR4 memory initRavi Sarawadi
2018-02-15mb/google/octopus: Add new boardHannah Williams
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 12:54:53 +0000