summaryrefslogtreecommitdiff
path: root/src/mainboard/google/octopus/variants/fleex
AgeCommit message (Expand)Author
2020-10-30mb/google/octopus/var/fleex: Disable XHCI LFPS power management by skuEric Lai
2020-10-26mb/google/octopus/var/fleex: Add goodix touch pad supportEric Lai
2020-10-26mb/google/octopus/var/fleex: Add new SKU for LTE touchAmanda Huang
2020-10-05Fleex: Resume from suspend on critical batteryDaisuke Nojiri
2020-09-28mb/google/octopus/variants/fleex: Only do LTE power off for LTE skuEric Lai
2020-09-28mb/google/octopus/var/fleex: Use Wifi SAR table for non-LTE sku onlyEric Lai
2020-09-21mb/google/octopus: Clean up LTE power off functionEric Lai
2020-09-18mb/google/octopus/variants/fleex: support LTE power sequenceEric Lai
2020-09-14mb/google/octopus/variants/fleex: Add G2Touch touchscreen supportJohn Su
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-04-06mb/google/octopus: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2019-10-10mb/google/octopus/variants/fleex: Update GPIOs to fix EMRJohn Su
2019-10-07mb/google/octopus/variants/fleex: Adjust I2C0 CLK to meet specJohn Su
2019-07-23mb/google/octopus/variants/fleex: Remove gpio NC setting for enabling I2C0Frank Wu
2019-07-03mb/google/octopus/variants/fleex: Enable EMR function for Grob360SChris Zhou
2019-04-18mb/google/octopus: Set default configuration to low for gpio_178Wisley Chen
2019-01-28mb/google/octopus: Fix termination for unused dual voltage pinsShamile Khan
2019-01-20mb/google/octopus/variants: Disable xHCI compliance mode for FleexAmanda Huang
2019-01-10mainboard/google/octopus: configure EC_AP_INT_ODLJett Rink
2018-12-29mb/google/octopus: Override emmc DLL values for FleexBora Guvendik
2018-12-24Revert "mb/google/octopus/variants/fleex: Update Charger throttling settings"Sumeet Pawnikar
2018-12-17mb/google/octopus/variants/fleex: Update Charger throttling settingsSumeet Pawnikar
2018-11-27mb/google/octopus/var/fleex: Deprecate bid 0Furquan Shaikh
2018-11-27mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboardFurquan Shaikh
2018-11-12mb/google/octopus/variants/fleex: Set up tcc offset for fleexJohn Su
2018-10-24mb/google/octopus/variants/fleex: Update DPTF parametersJohn Su
2018-10-23mb/google/octopus: Use a single GPIO for trackpad wake and IRQFurquan Shaikh
2018-10-06mb/google/octopus/variants/fleex: Disable I2C0 in devicetreeFurquan Shaikh
2018-10-01mb/google/octopus: Operate touchpad I2C CLK in specChris Zhou
2018-09-28src/*: normalize Google copyright headersPatrick Georgi
2018-09-21mb/google/octopus/variants/fleex: Update DPTF parametersSumeet Pawnikar
2018-09-06mb/google/octopus: Configure H1 interrupt pad using Rx level configFurquan Shaikh
2018-08-30mb/google/octopus: Add missing IOstandy settings.Shamile Khan
2018-08-20mb/google/octopus/variants/fleex: Increase weida touchscreen reset delayCrystal Lin
2018-08-13mb/google/octopus/variants/fleex: Set up DPTF tableJohn Su
2018-08-12mb/google/octopus/var/fleex: Update GPIO config for fleex bid >= 1Furquan Shaikh
2018-08-06mb/google/octopus/variants/fleex: Enable Weida touchscreen deviceCrystal Lin
2018-06-25mb/google/octopus: Use the newly added override devicetree featureFurquan Shaikh
2018-06-18mb/google/octopus: Create fleex variantJustin TerAvest
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 15:12:32 +0000