| Age | Commit message (Expand) | Author |
|---|
| 2021-01-21 | mb/google/octopus: do UART pad configuration at board-level | Michael Niewöhner |
| 2021-01-21 | mb/google/octopus: do LPC/eSPI pad configuration at board-level | Michael Niewöhner |
| 2021-01-08 | mb/google/octopus: add audio codec into SSFC support for Bobba | Marco Chen |
| 2021-01-04 | mb/google/octopus: Add ACPI backlight controls | Matt DeVillier |
| 2020-11-02 | mb, soc/intel: Reorganize CNVi device entries in devicetree | Furquan Shaikh |
| 2020-10-13 | mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devices | Furquan Shaikh |
| 2020-10-09 | mb/google/octopus: Disable Ambient Light Sensor (ALS) | Karthikeyan Ramasubramanian |
| 2020-09-23 | mb/google/octopus: Set ModPhyIfValue to default value 0x12 | Marx Wang |
| 2020-09-21 | mb/google/octopus: Clean up LTE power off function | Eric Lai |
| 2020-09-01 | {include,mb,soc,sb,vendorcode}: Make hexadecimal notation consistent | Subrata Banik |
| 2020-08-14 | mb/google/octopus: Set default value of ModPhyIfValue parameter | Seunghwan Kim |
| 2020-05-26 | apollolake: update processor power limits configuration | Sumeet R Pawnikar |
| 2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
| 2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
| 2020-04-06 | mb/google/octopus: Use SPDX for GPL-2.0-only files | Angel Pons |
| 2020-03-20 | drivers/generic/max98357a: Allow custom _HID from config | Aamir Bohra |
| 2020-03-18 | src/mainboard/g/octopus: Enables GMM in the devicetree for octopus | Franklin He |
| 2020-03-18 | mainboard/google: Remove copyright notices | Patrick Georgi |
| 2020-03-04 | mainboard/google/octopus: Migrate onto SKU ID helpers | Edward O'Callaghan |
| 2019-08-23 | Revert "mb/google/octopus: Disable WLAN prior the entry of S5" | Kane Chen |
| 2019-07-19 | mb/google/octopus: Disable unused USB devices | Karthikeyan Ramasubramanian |
| 2019-07-19 | mb/google/octopus: Add ACPI configuration for USB devices | Karthikeyan Ramasubramanian |
| 2019-07-16 | mb/google/octopus/variants/garg: support LTE power sequence | Marco Chen |
| 2019-07-16 | mb/google/octopus: add variant_smi_sleep | Marco Chen |
| 2019-07-16 | mb/google/octopus: add variant_early_override_gpio_table | Marco Chen |
| 2019-07-10 | mb/google/octopus: Remove LPDDR4 RAMID index 5,6 CH[1] only SKU | Kevin Chiu |
| 2019-06-21 | mb/google/octopus: expose get_board_sku as global | Kevin Chiu |
| 2019-06-12 | mb/google/octopus: make new targets have DRAM part in CBI by default | Aaron Durbin |
| 2019-05-06 | Fix code that would trip -Wtype-limits | Julius Werner |
| 2019-04-20 | mb/google/octopus/variants/baseboard: Disable unused I2C 1 | Tony Huang |
| 2019-04-18 | mb/google/octopus: Set default configuration to low for gpio_178 | Wisley Chen |
| 2019-04-11 | mb/google/octopus: Disable WLAN prior the entry of S5 | Kane Chen |
| 2019-03-08 | coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) | Julius Werner |
| 2019-03-05 | mb/google/octopus: Add 6GB dual-channel memory configuration | Seunghwan Kim |
| 2019-02-18 | mb/google/laser: Disable touch screen device that according to SKU ID | peichao.wang |
| 2019-02-15 | mb/google/octopus: Fix USB ACPI configuration for CNVi BT module | Karthikeyan Ramasubramanian |
| 2019-02-05 | mb/google/octopus: Add USB ACPI configuration for CNVi BT module | Karthikeyan Ramasubramanian |
| 2019-01-31 | mb/google/octopus: Add Bluetooth USB ACPI configuration | Karthikeyan Ramasubramanian |
| 2019-01-24 | mb/google/octopus/bobba: Add support to handle PEN_EJECT event | Karthikeyan Ramasubramanian |
| 2019-01-14 | mb/google/octopus/variants: Configure PLT_RST_L pad IOSSTATE masked | John Zhao |
| 2019-01-10 | mainboard/google/octopus: configure EC_AP_INT_ODL | Jett Rink |
| 2018-12-10 | mb/google/octopus: Update the PEN_EJECT GPIO configuration | Karthikeyan Ramasubramanian |
| 2018-12-03 | mb/google/octopus: Enable mode change as wake source from S3/S0ix | Furquan Shaikh |
| 2018-11-27 | mb/google/octopus: Update GPIO_178 in early_gpio_table in baseboard | Furquan Shaikh |
| 2018-11-27 | mb/google/octopus: Configure all debug header lines as NC | Furquan Shaikh |
| 2018-11-21 | mb/google/octopus: Update TSR1 threshold settings | Sumeet Pawnikar |
| 2018-11-08 | mb/google/octopus/variants/baseboard: Improve cold boot and S3 resume | John Zhao |
| 2018-10-23 | mb/google/octopus: Use a single GPIO for trackpad wake and IRQ | Furquan Shaikh |
| 2018-10-08 | Move compiler.h to commonlib | Nico Huber |
| 2018-10-06 | soc/intel/common, mb/google, mb/siemens: Use lower case x for RXD | Furquan Shaikh |
| 2018-10-06 | mb/google/octopus: Disable I2C3 in devicetree | Furquan Shaikh |
| 2018-09-06 | mb/google/octopus: Configure H1 interrupt pad using Rx level config | Furquan Shaikh |
| 2018-09-06 | mb/google/octopus: Enable TBMC device | Amanda Huang |
| 2018-08-30 | mb/google/octopus: Add missing IOstandy settings. | Shamile Khan |
| 2018-08-27 | mb/google/octopus/variants/baseboard: Update DPTF parameters | Sumeet Pawnikar |
| 2018-08-12 | mb/google/octopus: Do not configure IOStandby for WLAN_PE_RST | Furquan Shaikh |
| 2018-08-12 | mb/google/octopus: Use correct chip for CNVi device | Furquan Shaikh |
| 2018-08-12 | mb/google/octopus: Disable unused I2C2 in devicetree | Furquan Shaikh |
| 2018-08-10 | mb/google/octopus: add support for new shared memory config | Aaron Durbin |
| 2018-08-09 | mb/google/octopus: remove disable_periodic_retraining options | Aaron Durbin |
| 2018-08-06 | mb/google/octopus/variants/baseboard: Update Power Limit1 | Sumeet Pawnikar |
| 2018-07-31 | mb/google/octopus: add lpddr4 skus for new memory sources | nickchen |
| 2018-07-26 | mb/google/octopus: Use newly added gpio_configure_pads_with_override | Furquan Shaikh |
| 2018-07-26 | mb/google/octopus: add variant devicetree update callback | Aaron Durbin |
| 2018-07-26 | mb/google/octopus: remove unused variant_board_id() | Aaron Durbin |
| 2018-07-25 | mb/google/octopus: Fix unused pins and those with external terminations | Furquan Shaikh |
| 2018-07-18 | mb/google/octopus/variants/baseboard: Udpate CPU critical temp | Sumeet Pawnikar |
| 2018-07-12 | mb/google/octopus: Enable TBMC device only for phaser | Furquan Shaikh |
| 2018-07-06 | mb/google/octopus: Enable tablet mode | Justin TerAvest |
| 2018-06-25 | mb/google/octopus: Use the newly added override devicetree feature | Furquan Shaikh |
| 2018-06-25 | mb/google/octopus/variants/baseboard: Update DPTF parameters | Sumeet Pawnikar |
| 2018-06-20 | mb/google/octopus: Configure EC_IN_RW correctly | Furquan Shaikh |
| 2018-06-20 | mb/google/octopus: Enable Synaptics touchpad device | wuxy |
| 2018-06-18 | mb/google/octopus: Enable Synaptics touchscreen device | Furquan Shaikh |
| 2018-06-15 | soc/intel/{glk,apl} and mainboards: Configure LPC_CLKRUN# pin as GPIO for S0ix | Hannah Williams |
| 2018-06-07 | mb/google/octopus: Fix GPIO to GPE mappings in devicetree | Furquan Shaikh |
| 2018-06-06 | mb/google/octopus: Update GPIOs as per latest schematics | Furquan Shaikh |
| 2018-06-06 | mb/google/octopus: Fix invalid IOSSTATE settings for 1.8V pins | Shamile Khan |
| 2018-06-06 | soc/intel/common/block: Add common chip config block | Subrata Banik |
| 2018-06-06 | mb/google/octopus: Enable wake-over-wifi for octopus variants | Furquan Shaikh |
| 2018-06-04 | mb/google: Get rid of whitespace before tab | Elyes HAOUAS |
| 2018-06-01 | mb/google/octopus: Enable RT5682 headset codec for BIP board | Naveen Manohar |
| 2018-05-28 | soc/intel/apollolake: Don't use pulldowns in standby state for 1.8/3.3V pins. | Shamile Khan |
| 2018-05-19 | mb/google/octopus: enable xdci controller | Jagadish Krishnamoorthy |
| 2018-05-18 | mb/google/octopus: Disable BT before S5 entry | Hannah Williams |
| 2018-05-11 | mb/google/octopus: Ignore standby state for DMIC pins | Shamile Khan |
| 2018-05-02 | mb/google/octopus: Configure pins to reflect delta w.r.t yorp | Shamile Khan |
| 2018-04-30 | mb/google/octopus: Fix crossystem wpsw_cur error | Hannah Williams |
| 2018-04-28 | mb/google/octopus: Enable pull on ESPI_IO1 line | Furquan Shaikh |
| 2018-04-25 | mb/google/octopus: Disable PCIE NPK device | Shaunak Saha |
| 2018-04-24 | compiler.h: add __weak macro | Aaron Durbin |
| 2018-04-16 | mb/google/octopus: Add Write Protect GPIO to cros_gpios | Hannah Williams |
| 2018-04-09 | mb/google/octopus: Enable EC wake | Shaunak Saha |
| 2018-04-09 | mb/google/octopus/variants/baseboard: Add DPTF parameters | Sumeet Pawnikar |
| 2018-04-06 | mb/google/octopus: Edge trigger cr50 interrupt | Justin TerAvest |
| 2018-04-06 | mb/google/octopus/variants/baseboard: Enable DPTF support | Sumeet Pawnikar |
| 2018-04-04 | mb/google/octopus/variants/baseboard: Set PL1 and PL2 value | Sumeet Pawnikar |
| 2018-04-02 | mb/google/octopus: Fix Trackpad interrupt GPIO config | Hannah Williams |
| 2018-04-02 | mb/google/octopus: Make PMC I2C pads IOSTANDBY_IGNORE | Hannah Williams |
| 2018-04-01 | mb/google/octopus: update SSP port and DMIC 4CH nhlt support | M Naveen |
