| Age | Commit message (Collapse) | Author |
|---|
|
Some projects (like ChromeOS) put more content than described by CBFS
onto their image. For top-aligned images (read: x86), this has
traditionally been achieved with a CBFS_SIZE Kconfig (which denotes the
area actually managed by CBFS, as opposed to ROM_SIZE) that is used to
calculate the CBFS entry start offset. On bottom-aligned boards, many
define a fake (smaller) ROM_SIZE for only the CBFS part, which is not
consistently done and can be an issue because ROM_SIZE is expected to be
a power of two.
This patch changes all non-x86 boards to describe their actual
(physical) ROM size via one of the BOARD_ROMSIZE_KB_xxx options as a
mainboard Kconfig select (which is the correct place to declare
unchangeable physical properties of the board). It also changes the
cbfstool create invocation to use CBFS_SIZE as the -s parameter for
those architectures, which defaults to ROM_SIZE but gets overridden for
special use cases like ChromeOS. This has the advantage that cbfstool
has a consistent idea of where the area it is responsible for ends,
which offers better bounds-checking and is needed for a subsequent fix.
Also change the FMAP offset to default to right behind the (now
consistently known) CBFS region for non-x86 boards, which has emerged as
a de-facto standard on those architectures and allows us to reduce the
amount of custom configuration. In the future, the nightmare that is
ChromeOS's image build system could be redesigned to enforce this
automatically, and also confirm that it doesn't overwrite any space used
by CBFS (which is now consistently defined as the file size of
coreboot.rom on non-x86).
CQ-DEPEND=CL:231576,CL:231475
BRANCH=None
BUG=chromium:422501
TEST=Built and booted on Veyron_Pinky.
Change-Id: I89aa5b30e25679e074d4cb5eee4c08178892ada6
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: e707c67c69599274b890d0686522880aa2e16d71
Original-Change-Id: I4fce5a56a8d72f4c4dd3a08c129025f1565351cc
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/229974
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9619
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This CL makes slight changes to the ChromeOS-specific GPIO definitions
of Tegra and Rockchip boards to prepare them for new features in
depthcharge. It adds descriptions for the EC in RW and reset GPIOs,
changes the value Tegra writes into the (previously unused) 'port' field
to describe the complete GPIO information, and removes code to sample
some GPIOs that don't need to be sampled at coreboot time (to help
depthcharge detect errors and avoid using a stale value for something
that should always represent the current state).
BRANCH=None
BUG=None
TEST=None (tested together with depthcharge patches)
Change-Id: I3774979dbe7cacce4932c85810596d80e5664028
Signed-off-by: Stefan Reinauer <reinauer@chromium.org>
Original-Commit-Id: df295d0432fbf623597cf36ebb170bd4f63ee08d
Original-Change-Id: I36bb16c8d931f862bf12a5b862b10cf18d738ddd
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/231222
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9570
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This deprecates TERTIARY_BOARD_ID. Instead, a board will set
BOARD_ID_SUPPORT (the ones affected already do) which will set
GENERIC_GPIO_SUPPORT and compile the generic GPIO library.
The user is expected to handle the details of how the ID is encoded.
BUG=none
BRANCH=none
TEST=Compiled for peppy, nyan*, storm, and pinky
Change-Id: Iaf1cac6e90b6c931100e9d1b6735684fac86b8a8
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 93db63f419f596160ce2459eb70b3218cc83c09e
Original-Change-Id: I687877e5bb89679d0133bed24e2480216c384a1c
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228322
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: http://review.coreboot.org/9413
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch makes a few cosmetic changes:
- Rename tristate_gpios.c to gpio.c since it will soon be used for
binary GPIOs as well.
- Rename gpio_get_tristates() to gpio_base3_value() - The binary
version will be called gpio_base2_value().
- Updates call sites.
- Change the variable name "id" to something more generic.
BUG=none
BRANCH=none
TEST=compiled for veyron_pinky and storm
Change-Id: Iab7e32f4e9d70853f782695cfe6842accff1df64
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c47d0f33ea1a6e9515211b834009cf47a171953f
Original-Change-Id: I36d88c67cb118efd1730278691dc3e4ecb6055ee
Original-Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/228324
Reviewed-on: http://review.coreboot.org/9411
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The function to read board IDs from tristate GPIOs currently supports
two output modes: a normal base-3 integer, or a custom format where
every two bits represent one tristate pin. Each board decides which
representation to use on its own, which is inconsistent and provides
another possible gotcha to trip over when reading unfamiliar code.
The two-bits-per-pin format creates the additional problem that a
complete list of IDs (such as some boards use to build board-ID tables)
necessarily has "holes" in them (since 0b11 does not correspond to a
possible pin state), which makes them extremely tricky to write, read
and expand. It's also very unintuitive in my opinion, although it was
intended to make it easier to read individual pin states from a hex
representation.
This patch switches all boards over to base-3 and removes the other
format to improve consistency. The tristate reading function will just
print the pin states as they are read to make it easier to debug them,
and we add a new BASE3() macro that can generate ternary numbers from
pin states. Also change the order of all static initializers of board ID
pin lists to write the most significant bit first, hoping that this can
help clear up confusion about the endianness of the pins.
CQ-DEPEND=CL:219902
BUG=None
TEST=Booted on a Nyan_Blaze (with board ID 1, unfortunately the only one
I have). Compiled on Daisy, Peach_Pit, Nyan, Nyan_Big, Nyan_Blaze, Rush,
Rush_Ryu, Storm, Veryon_Pinky and Falco for good measure.
Change-Id: I3ce5a0829f260db7d7df77e6788c2c6d13901b8f
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 2fa9545ac431c9af111ee4444d593ee4cf49554d
Original-Change-Id: I6133cdaf01ed6590ae07e88d9e85a33dc013211a
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/219901
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9401
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
We've had gpiolib.h which defines a few common GPIO access functions for
a while, but it wasn't really complete. This patch adds the missing
gpio_output() function, and also renames the unwieldy
gpio_get_in_value() and gpio_set_out_value() to the much easier to
handle gpio_get() and gpio_set(). The header is renamed to the simpler
gpio.h while we're at it (there was never really anything "lib" about
it, and it was presumably just chosen due to the IPQ806x include/
conflict problem that is now resolved).
It also moves the definition of gpio_t into SoC-specific code, so that
different implementations are free to encode their platform-specific
GPIO parameters in those 4 bytes in the most convenient way (such as the
rk3288 with a bitfield struct). Every SoC intending to use this common
API should supply a <soc/gpio.h> that typedefs gpio_t to a type at most
4 bytes in length. Files accessing the API only need to include <gpio.h>
which may pull in additional things (like a gpio_t creation macro) from
<soc/gpio.h> on its own.
For now the API is still only used on non-x86 SoCs. Whether it makes
sense to expand it to x86 as well should be separately evaluated at a
later point (by someone who understands those systems better). Also,
Exynos retains its old, incompatible GPIO API even though it would be a
prime candidate, because it's currently just not worth the effort.
BUG=None
TEST=Compiled on Daisy, Peach_Pit, Nyan_Blaze, Rush_Ryu, Storm and
Veyron_Pinky.
Change-Id: Ieee77373c2bd13d07ece26fa7f8b08be324842fe
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 9e04902ada56b929e3829f2c3b4aeb618682096e
Original-Change-Id: I6c1e7d1e154d9b02288aabedb397e21e1aadfa15
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/220975
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9400
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch aligns tegra124 to the new SoC header include scheme.
Also alphabetized headers in affected files since we touch them anyway.
BUG=None
TEST=Tested with whole series. Compiled Nyan, Nyan_Big and Nyan_Blaze.
Change-Id: Ia82ab86b2af903690cc6c9d310f7bdda3425ea7c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 4d23774e071ec22781991ff20fbf63802f620c88
Original-Change-Id: Ia126cff8590117788d1872e50608c257d2659c1f
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/224504
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/9326
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch creates a new mechanism to define the static memory layout
(primarily in SRAM) for a given board, superseding the brittle mass of
Kconfigs that we were using before. The core part is a memlayout.ld file
in the mainboard directory (although boards are expected to just include
the SoC default in most cases), which is the primary linker script for
all stages (though not rmodules for now). It uses preprocessor macros
from <memlayout.h> to form a different valid linker script for all
stages while looking like a declarative, boilerplate-free map of memory
addresses to the programmer. Linker asserts will automatically guarantee
that the defined regions cannot overlap. Stages are defined with a
maximum size that will be enforced by the linker. The file serves to
both define and document the memory layout, so that the documentation
cannot go missing or out of date.
The mechanism is implemented for all boards in the ARM, ARM64 and MIPS
architectures, and should be extended onto all systems using SRAM in the
future. The CAR/XIP environment on x86 has very different requirements
and the layout is generally not as static, so it will stay like it is
and be unaffected by this patch (save for aligning some symbol names for
consistency and sharing the new common ramstage linker script include).
BUG=None
TEST=Booted normally and in recovery mode, checked suspend/resume and
the CBMEM console on Falco, Blaze (both normal and vboot2), Pinky and
Pit. Compiled Ryu, Storm and Urara, manually compared the disassemblies
with ToT and looked for red flags.
Change-Id: Ifd2276417f2036cbe9c056f17e42f051bcd20e81
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: f1e2028e7ebceeb2d71ff366150a37564595e614
Original-Change-Id: I005506add4e8fcdb74db6d5e6cb2d4cb1bd3cda5
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/213370
Reviewed-on: http://review.coreboot.org/9283
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Tauner <stefan.tauner@gmx.at>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
The existing cpu_reset does board-wide reset, thus, should be renamed.
BUG=none
BRANCH=none
TEST=Built firmware for Nyans. Ran faft on Blaze.
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I5dc4fa9bae328001a897a371d4f23632701f1dd9
Original-Reviewed-on: https://chromium-review.googlesource.com/212982
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 29753b9c1dfe7ecd156042d69b74e9fe4244f455)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I98eca40c50637bda01a9029a904bca6880cd081f
Reviewed-on: http://review.coreboot.org/9179
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Pull out the common usb setup utmip functions from t124 into tegra usb.h. These
can be reused for t132 as well.
BUG=chrome-os-partner:31293
BRANCH=None
TEST=Compiles successfully for nyan, big and blaze
Change-Id: Idddd40e409b56875436db6918d05f2889d83870b
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: 12f12cb30a033cce645f53457d13a987aeec22a1
Original-Change-Id: I83f83bafad0f52ad651fe5989430f41142803f2b
Original-Signed-off-by: Furquan Shaikh <furquan@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/211200
Original-Tested-by: Furquan Shaikh <furquan@chromium.org>
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Commit-Queue: Furquan Shaikh <furquan@chromium.org>
Reviewed-on: http://review.coreboot.org/8927
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The name was changed due to review comments misunderstanding, it
should be restored to properly convey what the function does.
BUG=chrome-os-partner:30489
TEST=verified that Storm still properly reports board ID
Change-Id: Iba33cf837e137424bfac970b0c9764d26786be9c
Signed-off-by: Patrick Georgi <pgeorgi@chromium.org>
Original-Commit-Id: c0fff28c6ebf255cb9cf9dfe4c961d7a25bb13ff
Original-Change-Id: I4bd63f29afbfaf9f3e3e78602564eb52f63cc487
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/211413
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8979
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
With CONFIG_RETURN_FROM_VERSTAGE false, the verstage loads the romstage over
the bootblock, then exits to the romstage. this is necessary for some SOC
(e.g. tegra124) which runs the bootblock on a different architecture.
With CONFIG_RETURN_FROM_VERSTAGE true, the verstage returns to the bootblock.
Then, the bootblock loads the romstage over the verstage and exits to the
romstage. this is probably necessary for some SOC (e.g. rockchip) which does not
have SRAM big enough to fit the verstage and the romstage at the same time.
BUG=none
TEST=Built Blaze with USE=+/-vboot2. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I673945c5e21afc800d523fbb25d49fdc83693544
Original-Reviewed-on: https://chromium-review.googlesource.com/212365
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Note: This purposefully is probably broken in vendorcode/google/chromeos
as I'm just trying to set a base for dropping more patches in. The vboot
paths will have to change from how they are currently constructed.
(cherry picked from commit 4fa17395113d86445660091413ecb005485f8014)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I9117434ce99695f9b7021a06196d864f180df5c9
Reviewed-on: http://review.coreboot.org/8881
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
this change reduces the code duplication of the bootblock and the romstages for
Nyans.
BUG=none
TEST=Built Nyan, Big, and Blaze. Ran faft on Blaze.
BRANCH=none
Original-Signed-off-by: dnojiri@chromium.org (Daisuke Nojiri)
Original-Change-Id: Ieb9dac3b061a2cf46c63afb2f31eb67ab391ea1a
Original-Reviewed-on: https://chromium-review.googlesource.com/214050
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit f3413d39458f03895fe4963a41285f71d81bcf5f)
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Change-Id: I912f63b12321aa26a7add302fc8a6c4e607330ef
Reviewed-on: http://review.coreboot.org/8880
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
These boards are supposed to be able to determine the board ID at run
time based on GPIO settings.
BUG=chrome-os-partner:30489
TEST=verified that all boards build. Checked that storm proto0 reports
board ID of 0 on the console
Original-Change-Id: Iadd758a799d69e1e34579d7d495378856b64c45b
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210119
(cherry picked from commit f4d41ddf906c1bf0d10da38011998fa0a630c332)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0d5f94d3428157a70f0a9d711b57432e3f796733
Reviewed-on: http://review.coreboot.org/8722
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
For the majority of Chrome OS boards there is no need to include board
ID calculation in any stage but ramstage, where the ID should be
available for inclusion into the coreboot table.
BUG=chrome-os-partner:30489
TEST=build only, no other tests yet
Change-Id: I1451d52382bc48cc126d40267e0f61712f4a6d4b
Original-Change-Id: Ib9c06698a399d31e79a9b14143343ba2ad46d0fb
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/210117
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 27dd40e85bfcd0a38f388bad4d79f5fbb77a7566)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8720
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Some platforms use tertiary interpretation of GPIO input state to
increase number of distinct values represented by a limited number of
GPIOs. The three states are
- external pull down (interpreted as 0)
- external pull up (1)
- not connected (2)
This has been required by Nvidia devices so far, but Exynos and
Ipq8086 platforms need this too.
This patch moves the function reading the tertiary state into the
library and exposes the necessary GPIO API functions in a new include
file. The functions are still supposed to be provided by platform
specific modules.
The function interpreting the GPIO states has been modified to allow
to interpret the state either as a true tertiary number or as a set
two bit fields.
Since linker garbage collection is not happening when building x86
targets, a new configuration option is being added to include the new
module only when needed.
BUG=chrome-os-partner:30489
TEST=verified that nyan_big still reports proper revision ID.
Change-Id: Ib55122c359629b58288c1022da83e6c63dc2264d
Original-Change-Id: I243c9f43c82bd4a41de2154bbdbd07df0a241046
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209673
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit c79ef1c545d073eaad69e6c8c629f9656b8c2f3e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/8717
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Instead of sprinkling the cbfs calls around (as well as getting
return values incorrect) use the common run_ramstage() to perform
the necessary work to load and run ramstage.
Change-Id: I37b1e94be36ef7a43efe65b2db110742fa105169
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/8710
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There is no point in duplicating boardid.h per board - they are all
the same. Let's keep a single instance in the common include directory
and let the linker report a problem if one tries using this function
on a board where it is not supported.
BUG=chrome-os-partner:30489
TEST=verified that coreboot builds fine for nyan_big and nyan_blaze.
Original-Change-Id: Ifbe9c2287a1d828d4db74c637d1d02047ac4da25
Original-Signed-off-by: Vadim Bendebury <vbendeb@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/209699
Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org>
(cherry picked from commit 589e6415faf18ca6aaf44da343dd33eadc8a53d3)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8eef89cb822611a0050e5a50fc4b970eebd8d962
Reviewed-on: http://review.coreboot.org/8666
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This patch removes a chunk of romstage code from Tegra and all Nyan
boards that was supposed to enable some LCD power rails early, but never
really worked. The dev_find_slot() function can only find PCI devices,
which the CPU cluster is not. Since we're done with Nyan-RO and the
ramstage display code is fine as it is, there is no point in trying to
fix this... but we should remove it from ToT lest someone uses it as a
blueprint to add more dead code to future boards.
BRANCH=None
BUG=None
TEST=None
Original-Change-Id: I6eee256873299429d4e3934fe7d454120390f34d
Original-Signed-off-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/207720
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit a3df62a3bcefcc20ae59648f5d1f0a01db3c02c6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I8deedea5e9787848aae3064509c611bc349313cc
Reviewed-on: http://review.coreboot.org/8638
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I53959eb937c1db3c4211e23a6476340383a33c5b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/8021
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This replaces need for separate cbmemc_reinit() calls made
via CAR_MIGRATE() and in ramstage.
Change-Id: If7b4d855c75df58b173f26ef3c90a4a7563166d3
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: http://review.coreboot.org/7859
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
Hynix 2GB/4GB configs have been fine-tuned.
Kingston 2GB config is new, uses RAMCODE 0x6.
BUG=none
TEST=emerge-nyan_big coreboot-nyan_big OK. Flashed to my
Big 2GB system (PVT1/SKU1) and it booted OK.
BRANCH=nyan_big
Original-Change-Id: I8a23a5568ef84d5befc13623f78bce664130f314
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/203305
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit e47d18d8cff50f46d0a14715b6750f7aa6d0da82)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I363db37d6a63d9f5c578e68a0149259657e1ebfd
Reviewed-on: http://review.coreboot.org/8045
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
CrOS devices with Chromeos EC need only use hostevent to communicate
recovery assertion to the BIOS. This CL removes wired GPIO from
determining recovery as it appears under certain conditions (cold
reset) the internal PU on the AP isn't strong enough and therefore the
value is sometimes seen as asserted.
BRANCH=none
BUG=chrome-os-partner:29333
TEST=compiles & BIOS no longer responds to rec_mode GPIO during boot.
Original-Change-Id: Ib220cfa5f5bfe7193d555bfd32c0444b063d00f2
Original-Signed-off-by: Todd Broch <tbroch@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/202996
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
(cherry picked from commit d9927bcd67b0fb069fde231314e654d727092282)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6e086cbabc884f18deb2791a0f897e332b31032f
Reviewed-on: http://review.coreboot.org/8042
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The VDDIO to GEN2 I2C SCL/SDA pins is 1.8V and the external
pull-up voltage is 3.3V (the external 3.3V > I/O 1.8V) thus
the pinmux E_OD bit of these two pins needs to be set to
ensure GEN2 I2C pads work fine on 3.3V.
BRANCH=nyan
BUG=none
TEST=observed voltage drop from 3.3V to 2.36V on gen2 i2c
on blaze w/o this change. the waveform looks good on both
scl/sda pins w/ this change.
Original-Change-Id: I1b97f0c9c7580d1e532c3bdf7ac8690241ee7ee3
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/200996
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 2db39166ec525e56a19746f38a867305a2687365)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0c84eade89311baf0a6f180cb5cc9e2145f6b7ea
Reviewed-on: http://review.coreboot.org/7952
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
BUG=none
BRANCH=nyan
TEST=built and booted on Big under various modes, verified that
expected boot mode showed up using "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: I8d98487a2cb910874c8d741008ae59a6c89102e7
Original-Reviewed-on: https://chromium-review.googlesource.com/199691
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 9f4b2574c1af23dcdc01706e9a118441f46a0f97)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ibbf264a1e05323dfddb7cdb270ee6f2d49e83eff
Reviewed-on: http://review.coreboot.org/7946
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
When a watchdog reset happens, the SOC will reset but other parts of the
system might not. That puts the machine in a funny state and may prevent it
from booting properly.
BUG=chrome-os-partner:28559
TEST=Built for nyan, nyan_big and nyan_blaze. Booted normally, through EC
reset, software reset ("reboot" command from the terminal), and through watch
dog reset. Verified that the new code only triggered during the watchdog reset
and that the system rebooted and was able to boot without going into recovery
mode unnecessarily.
BRANCH=nyan
Change-Id: Id92411c928344547fcd97e45063e4aff52d2e9e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/198582
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit b298be41c0959c58aeb8be5bf15141549da2504c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/7900
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This is a fix for the 'Lost arb' we're seeing on Nyan* during
reboot stress testing. It occurs when we are slamming the
default PMIC registers with pmic_write_reg().
Currently, I've only captured this a few times, and the bus
clear seemed to work, as the PMIC writes continued (where
they'd hang the system before bus clear) for a couple of regs,
then it hangs hard, no messages, no 2nd lost arb, etc. So
I've added code to the PMIC write function that will reset the
SoC if any I2C error occurs. That seems to recover OK, i.e. on
the next reboot the PMIC writes all go thru, boot is OK, kernel
loads, etc.
BUG=chrome-os-partner:28323
BRANCH=nyan
TEST=Tested on nyan. Built for nyan and nyan_big.
Original-Change-Id: I1ac5e3023ae22c015105b7f0fb7849663b4aa982
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/197732
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
(cherry picked from commit f445127e2d9e223a5ef9117008a7ac7631a7980c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I584d55b99d65f1e278961db6bdde1845cb01f3bc
Reviewed-on: http://review.coreboot.org/7897
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When across warm reset, if VDD_3V3_SD_CARD gets power-cycled but VDDIO_SDMMC3
does not, we will get ~1.5V leakage on VDD. To fix that, we reset VDDIO_SDMMC3
to 0 along with VDD_3V3_SD_CARD in Coreboot. Payloads must turn on VDDIO_SDMMC3
explicitly before accessing SD card.
Note the warnings of "VDD_SDMMC must set early" in comment seems only happens on
U-Boot and can be removed.
BUG=chrome-os-partner:27053
BRNACH=nyan
TEST=Ctrl-U to boot from SD card, login and type "reboot", then Ctrl-U to boot
again. Without this patch, system will fail in loading kernel.
Original-Change-Id: I7f85995317d18587d514ea3afcff3bfea0a33e93
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196961
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 2cfdb78d9dc229a3c06f19bbe137d59d923908a4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie7d814e0424478c35a56fbc959437ee6a555684a
Reviewed-on: http://review.coreboot.org/7866
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
When warm booting, SD card reader on Tegra 124 needs to be reset by setting
power GPIO to zero. Since we don't really access SD card in Coreboot, set it to
zero and let payloads enable power when they need to access SD cards.
CQ-DEPEND=CL:196783
BRANCH=nyan
BUG=chrome-os-partner:27053
TEST=emerge-nyan coreboot depthcharge chromeos-bootimage
# With related changes in depthcharge, boots SD card successfully.
Original-Change-Id: I2d368eb9480c978e9e343648b58a729028c94622
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/196774
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Tested-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 62bb7d04dff1a87474a8557f144b24e6b7d006ae)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3429535d0d032f9db89d8e70a525a6281102537a
Reviewed-on: http://review.coreboot.org/7865
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Some panels (including those on Big DVT) cannot work fine without link training
before sending the video signals, especially multi-lane Full HD panels. We need
to use the fast link training functions from kernel to support them.
BRANCH=Nyan
BUG=chrome-os-partner:28128, chrome-os-partner:28129
TEST=tested on nyan, nyan_big dvt.
Vince verified on Full HD panels.
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: Ifde8daf0ebdc6fb407610d3563f3311b2a72dbc4
Original-Reviewed-on: https://chromium-review.googlesource.com/196162
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 992132ff3431fc7abba10cc8e910e36d4f3a3f7a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I5ed091ae7a872fd674ab21f9f80267052fcd24b1
Reviewed-on: http://review.coreboot.org/7864
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The call was after the call to vboot_verify_firmware and so would only be
called when falling back to RO, aka recovery mode. This change moves it to
before vboot_verify_firmware so we'll always have the cbmem console.
BUG=None
TEST=Built and booted on nyan and verified that the cbmem console was the same
as the serial output. Built for big and blaze.
BRANCH=nyan
Original-Change-Id: I02d01110659689b08d32777dae384ac3e01b3b9f
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196158
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d3e4a778e4a0f5ade7d633d8ce7e72ef06c44086)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id14a19a78bcb21cb0c4030c2e41195e491f690d5
Reviewed-on: http://review.coreboot.org/7777
Tested-by: build bot (Jenkins)
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Panel datasheet defines some delay between PWM signal out and
backlight enable. This change fixes the current sequence
and makes the delays adjustable by dt setting.
BRANCH=none
BUG=chrome-os-partner:28008
TEST=Verified on Big DVT and Nyan/Norrin panels.
Panel works fine with dev mode, and the measurement
of power on sequence meets panel requirements.
Original-Change-Id: If6015bbb6015a3b203d425f5e90f676ad786b5e8
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/196183
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit 2bbcaa7281222ffc0b4026e8b1eb4c210a8e308a)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id6424f66eb8dc6adeb70eaa33df742f4e57983c3
Reviewed-on: http://review.coreboot.org/7776
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Enable pinmux clamp function to avoid pinmux conflict.
For pins which are configured to tristate enabled, the inputs to the
controller will be clamped to zero. This can be used to avoid pinmux
conflicts since the tristate bit is set to 1 in the power-on-reset
pinmux setting.
With pinmux clamp enabled, we need to configure all the input pins
to tristate disabled.
BUG=chrome-os-partner:27091
BRANCH=None
TEST=built and booted successfully, display worked fine.
Original-Change-Id: Id79a717f2025c812908c7152d439351208aee8d2
Original-Signed-off-by: Ken Chang <kenc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194060
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c95d6fe79810612cfad721667657cdcb87068d23)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I1b23df8b90f83ea2b2c08c4364d90fe71533a5a0
Reviewed-on: http://review.coreboot.org/7775
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This enables event logging support for Nyan platforms.
Right now this doesn't do a whole lot. We can add events in
later CLs.
BUG=none
BRANCH=none
TEST=built and booted for Nyan Rev. 1, eventlog gets initialized
if necessary and can be printed by "mosys eventlog list"
Signed-off-by: David Hendricks <dhendrix@chromium.org>
Original-Change-Id: Id77a78f55c8bff9ef0ffc7109c8b03c270e8b6b1
Original-Reviewed-on: https://chromium-review.googlesource.com/191200
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 1bb1a00863a63e53379b02f2b466d4d8ae3cef50)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3a5d896d97dfc66ec37114bd3bac3f34e1c22bf7
Reviewed-on: http://review.coreboot.org/7774
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
The new API is in use in depthcharge and is based around the "i2c_transfer"
function instead of i2c_read and i2c_write. The new function takes an array of
i2c_seg structures which represent each portion of the transfer after a start
bit and before the stop bit. If there's more than one segment, they're
seperated by repeated starts.
Some wrapper functions have also been added which make certain common
operations easy. These include reading or writing a byte from a register or
reading or writing a blob of raw data. The i2c device drivers generally use
these wrappers but can call the i2c_transfer function directly if the need
something different.
The tegra i2c driver was very similar to the one in depthcharge and was simple
to convert. The Exynos 5250 and 5420 drivers were ported from depthcharge and
replace the ones in coreboot. The Exynos 5420 driver was ported from the high
speed portion of the one in coreboot and was straightforward to port back. The
low speed portion and the Exynos 5250 drivers had been transplanted from U-Boot
and were replaced with the depthcharge implementation.
BUG=None
TEST=Built and booted on nyan with and without EFS. Built and booted on, pit
and daisy.
BRANCH=None
Original-Change-Id: I1e98c3fa2560be25444ab3d0394bb214b9d56e93
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193561
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 00c423fb2c06c69d580ee3ec0a3892ebf164a5fe)
This cherry-pick required additional changes to the following:
src/cpu/allwinner/a10/twi.c
src/drivers/xpowers/axp209/axp209.c
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I691959c66308eeeec219b1bec463b8b365a246d7
Reviewed-on: http://review.coreboot.org/7751
Tested-by: build bot (Jenkins)
Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
PLLD, the clock for display, was previously hard-coded to 306MHz. To support
more different panels, we should calcualte PLLD by panel pixel clock
configuration.
Note existing pixel clock configurations for nyan* boards won't work (they used
to rely on hard-coded approximated values) so the device trees are also
modified.
BRANCH=none
BUG=chrome-os-partner:25933
TEST=emerge-nyan_big coreboot chromeos-bootimage
See panel correctly initialized and got DEV screen.
Original-Change-Id: I8d592f0cc044e7c4e4803c45955642e791210ad3
Original-Signed-off-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-on: https://chromium-review.googlesource.com/193565
(cherry picked from commit 4f9b793633ebb2d104b0544e3b72fa0d105951c4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib2cabbad60af010e872505e888eab485ba8c2916
Reviewed-on: http://review.coreboot.org/7762
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
GPIO_PU4/PH1 and _PU5/PH2 were set to use the same PWM1/2 SFIO.
Even though no problems were caused by this, correct it here
so we get a conflict-free pinmux map.
BUG=chrome-os-partner:27091
BRANCH=none
TEST=Built and booted on Nyan, ran TegraShell "pinmux check"
and saw no conflicts.
Original-Change-Id: Ib16341aa0c92b9a078d7f3254d4151e9592f40b0
Original-Signed-off-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/194582
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit e06a5a62d381f803dd6574787795a51ce1f1fe74)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I055359dc80c0c878ba5f5faac17884a5506a826c
Reviewed-on: http://review.coreboot.org/7759
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
href_to_sync and vref_to_sync are chip specific settings. Currently
they are set to 1/2 of hfront_porch and vfront_porch respectively.
However, to support EDID (CL192730), per David Ung, the safe
values for both are 1 (the same settings as in kernel).
BUG=none
BRANCH=none
TEST=built and booted on nyan.
Original-Change-Id: Ifb8898e720a160ba044e2b526de2a4d17bc63672
Original-Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193504
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Hung-Te Lin <hungte@chromium.org>
Original-Tested-by: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit a7128a533ba6083ddfeeca3ba0828962cc2c8ab6)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I6954a5b49c798ebdffb20e3ebc9099cd17591b79
Reviewed-on: http://review.coreboot.org/7758
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This change takes about 8K of space away from the cbfs cache and repurposes
it for the cbmem console buffer. This is a little more than twice the space
we currently need for the bootblock and ROM stage to give us some room to grow
and for extra debug output if needed.
BUG=None
TEST=Built and booted on nyan. Checked the cbmem output.
BRANCH=None
Original-Change-Id: I6543bf5efddcf2377528a273f846b8090cd8be55
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193169
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 32e9ea6f9ecaa9b5441c91acab96514222f3af2c)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia9e5cc7a4b561bd89137cdc8b594584b272d9fab
Reviewed-on: http://review.coreboot.org/7757
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Set the appropriate config options and make the appropriate calls
to perform vboot verification. The flashmap offset as well as the TPM
information needs to be properly set. Lastly, call into
vboot_verify_firmware() to perform the vboot verification when it is
enabled.
BUG=chrome-os-partner:27094
BRANCH=None
TEST=Built vboot verification on nyan.
Original-Change-Id: I6113badd6143008ceb2b80f0ec0832e1addd03d7
Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/190928
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 8c6c48c7823738bf9b029a467b077d2ee20d04e5)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I2a442b1b0fff55e737df2e96740c05c1726502d5
Reviewed-on: http://review.coreboot.org/7743
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The EC doesn't seem to be able to handle its bus running at 4 MHz or higher.
To avoid it not being able to keep up, we reduce the frequency of that bus on
all nyan derivatives to 3 MHz. Because PLLP can't be divided that low, we
switch the clock source to CLKM.
BUG=chrome-os-partner:22849
TEST=Built and booted on nyan.
BRANCH=None
Original-Change-Id: I8f31b41098d64634427b4686f5333012f643fada
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/193349
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c215c50a5bb982b0e671c951e2fe8df06db85db2)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ia60513d118aed8881927e9d52f170e27655ea8e7
Reviewed-on: http://review.coreboot.org/7739
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The SPI drivers for tegra and exynos5420 have code in them which waits for a
frame header and leaves filler data out. The SPI driver shouldn't have support
for frame headers directly. If a device uses them, it should support them
itself. That makes the SPI drivers simpler and easier to write.
When moving the frame handling logic into the EC support code, EC communication
continued to work on tegra but no longer worked on exynos5420. That suggested
the SPI driver on the 5420 wasn't working correctly, so I replaced that with
the implementation in depthcharge. Unfortunately that implementation doesn't
support waiting for a frame header for the EC, so these changes are combined
into one.
BUG=None
TEST=Built and booted on pit. Built and booted on nyan. In both cases,
verified that there were no error messages from the SPI drivers or the EC
code.
BRANCH=None
Original-Change-Id: I62a68820c632f154acece94f54276ddcd1442c09
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191192
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4fcfed280ad70f14a013d5353aa0bee0af540630)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id8824523abc7afcbc214845901628833e135d142
Reviewed-on: http://review.coreboot.org/7706
Tested-by: build bot (Jenkins)
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
This is a companion patch of CL:191692 "Tegra: Fix Beep".
TEST=Booted Big. Verified beeps at dev screen. Measured frequency by smartphone.
Built Blaze.
BUG=chrome-os-partner:26609
BRANCH=none
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I9ba47d06202e9968a908c4a15cfbeac4bfe2c20c
Original-Reviewed-on: https://chromium-review.googlesource.com/192063
Original-Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 87a0f166e493b98d2a4e597f90ede090161fffdb)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3b819745b0753862e8cfa43e7fa1ed4b27eb462
Reviewed-on: http://review.coreboot.org/7462
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The TPM now works correctly with the I2C bus running at 400 KHz. Running it at
that frequency saves some boot time.
CQ-DEPEND=CL:191634
CQ-DEPEND=CL:191793
BUG=chrome-os-partner:27220
TEST=Built and booted on nyan with and without EFS.
BRANCH=None
Original-Change-Id: I157308c2745342dc1ada4499433004c7ce1c6435
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191813
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 39a740d488d8f33ee698805bc2a8438263162cc8)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I02978407e20cc9d526545157a3a3304729a91010
Reviewed-on: http://review.coreboot.org/7461
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
To enable EFS, we need to be able to talk to the TPM and the EC before the RAM
stage starts. That means we need to set up the pins for those busses, clock
those controllers and take them out of reset.
BUG=None
TEST=Built for nyan, nyan_big, and nyan_blaze. Booted on nyan. With other
changes which implement EFS on nyan, saw EC and TPM communication work when in
vboot.
BRANCH=None
Original-Change-Id: Ic65d69fd42beec5f03084c8cb970927c2f69dfb6
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191390
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d9c176536b1e2eba47fdca90dd3346052573223e)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Id3117bd0c36f8b92d85cc0cefde2bed9d8de90d0
Reviewed-on: http://review.coreboot.org/7456
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The existing display init functions were translated from a script. The new
code will play the same functions but are cleaner and readable and easier to
be ported to new panel.
BUG=none
TEST=build nyan and boot up kernel.
Signed-off-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Change-Id: Ic9983e57684a03e206efe3731968ec62905f4ee8
Original-Reviewed-on: https://chromium-review.googlesource.com/189518
Original-Commit-Queue: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Tested-by: Jimmy Zhang <jimmzhang@nvidia.com>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
(cherry picked from commit 5998f991ea3069d603443b93c2ebdcdcd04af961)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Squashed to pass abuild
nyan: Fix the build for big and blaze.
The display code for the tegra124 was cleaned up recently, but only the nyan
device tree was updated to match the new code, not big's or blaze's. This
change copies nyan's device tree over to those other two boards which will get
them building again. The settings may not be correct, but they'll be no less
correct than they were before. I also updated the copyright date for nyan.
BUG=none
TEST=Built for nyan, nyan_big, nyan_blaze. Booted on nyan_big and verified the
panel wasn't damaged by the new display code or settings.
BRANCH=None
Original-Change-Id: I75055a01f9402b3a9de9a787a9d3e737d25bb515
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/191364
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ea235f23df31b4ca8006dcdf3628eed096e062b9)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Icdad74bf2d013c3677e1a3373b8f89fad99f616e
Reviewed-on: http://review.coreboot.org/7454
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Switching unused pin to GPIO to avoid SPI1 conflicting.
BUG=chrome-os-partner:26701
BRANCH=none
TEST=Built and boot on Nyan
Original-Change-Id: I7de5b8d015f6d02baadd41b1b272dfc49d17c376
Original-Signed-off-by: Neil Chen <neilc@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189970
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit edf12f441adb2395fe2718bed98d79eb3b128f6b)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I562b58ba02825b16d374d9f0328f6c75431edc63
Reviewed-on: http://review.coreboot.org/7420
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The PMIC setup code was unconditionally waiting for 10ms after each register
write. It might be possible for there to be an excess of current from lots of
rails switching around at the same time, but we can avoid that with a much
shorter delay in a few strategic places.
This change also moves the write to LDO3 to just under SD1 because LDO3 should
track SD1.
The duration and position for the delays and moving LDO3 were provided by Dan
Coggin at nvidia.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan rev1. Measured a 230 ms decrease in boot time.
BRANCH=None
Original-Change-Id: I14805bf1b6242bdd0b286f37ae7d635c03909677
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189016
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Daniel Coggin <dcoggin@nvidia.com>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 06c4d346deeb47809cd88655a9fa6712ceef9491)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I3ce0bdeb4ee60499f6c192fe0803a4cab3d7a8af
Reviewed-on: http://review.coreboot.org/7419
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
These had been set to something fairly random which results in a very slow
clock on the bus itself. The new settings take into consideration the speed
the devices on the bus can run at. The TPM can't seem to handle speeds above
40KHz, but some documentation suggests that it should be able to handle up to
at least 100KHz.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan rev1. Built for big.
BRANCH=None
Original-Change-Id: Iee98957c7e492c7dd08b071aeef3cce75c4a9e56
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/189015
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit afca97a29aeb99d3899b713d0e57a3b3214f0d96)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Iab0c50b2119ac322252564354c90b5cb2d255c97
Reviewed-on: http://review.coreboot.org/7418
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When using LPAE, the address space is split to 2MB blocks. This change makes
the space reserved for DMA consistent with the block size.
TEST=Booted nyan with and without LPAE. Built nyan_big.
BUG=None
BRANCH=None
Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org>
Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
Original-Change-Id: I75c77484f6ca9f23b583ef651956d0265a9b4474
Original-Reviewed-on: https://chromium-review.googlesource.com/188571
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Daisuke Nojiri <dnojiri@chromium.org>
Original-Tested-by: Daisuke Nojiri <dnojiri@chromium.org>
(cherry picked from commit 16a40a48c2e3fc131a348d5e7d377d26f4b20aaf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ib79c9491dc504d28f811bbf0d91cffd292f5eb86
Reviewed-on: http://review.coreboot.org/7413
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
This indirectly selects an appropriate PLLX frequency so the main CPUs run as
fast as they can but not faster.
BUG=chrome-os-partner:25467
TEST=Booted on nyan rev1.
BRANCH=None
Original-Change-Id: Ibe61f5e35246b272771debf4fdf90c79b21eb5d0
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188603
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Reviewed-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 947ecbce3cb6e4d7ab07d3ffd5b4694ca6270cde)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I9163ddea7f246ae7207a8a715ebae2c9627a7e37
Reviewed-on: http://review.coreboot.org/7410
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The SRAM is very likely faster than going all the way out to DRAM for data,
but I don't think it's part of the cores themselves and won't be as fast as
the L1 caches. Enabling caching for this region reduces the time it takes to
get to the payload by about 75% when serial output is disabled and the main
part of display init is commented out.
BUG=chrome-os-partner:25467
TEST=Built and booted on nyan.
BRANCH=None
Original-Change-Id: I7ff26dea9d50e7d9a76e598e5654488481286b35
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/188459
Original-Reviewed-by: Tom Warren <twarren@nvidia.com>
Original-Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ac8b9b30490d511ca1b207af6845d50e08ac130f)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If79dcd1b116f30b778788ba4fd45d362ff5d8e6e
Reviewed-on: http://review.coreboot.org/7407
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
When setting up caching on nyan and big, we would set the region after DRAM to
the end of the address space as uncachable. DRAM may actually extend beyond
the end of the address space, so that may result in address aliasing or other
problems. This change adds a check to make sure there's actually space there.
BUG=None
TEST=Built for big.
BRANCH=None
Original-Change-Id: Ic0a98550222f9dfc0aeafd67a2dd1c0c8f4ece44
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186769
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 1866a4d2a001beb97779b611b8b69c63175048f4)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: If1ca8b5bd4efab8962e03c0d9eaa70c0327ea6b5
Reviewed-on: http://review.coreboot.org/7405
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Repurpose config->pwm to mean the particular PWM device (we use PWM1 on
nyan), and add code to program the PWM device.
BUG=none
TEST=emerge-nyan chromeos-coreboot-nyan, regenerate bootimage, and boot.
See that the backlight comes up in the bootloader, and brightness can be
adjusted via pwm_bl driver in the kernel.
Original-Change-Id: I2db047e5ef23c0e8fb66dd05ad6339d60918d493
Original-Signed-off-by: Andrew Chew <achew@nvidia.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185772
Original-Reviewed-by: Andrew Bresticker <abrestic@chromium.org>
(cherry picked from commit 0dee98dd0c8510ecd630b5c6cb9ea49724dc8b55)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ie53610f3afa30b2d8f484685fb0e8c0b12cd8241
Reviewed-on: http://review.coreboot.org/7402
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The generic tegra124 code will use one of the PWMs to drive the backlight of
the display, but the PWM clock was enabled only for nyan. This change enables
it for big as well.
BUG=none
TEST=Built for Big
BRANCH=None
Original-Change-Id: I5171da7c41f4b4db931563ada3e8e4ebf74ec3d9
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/186767
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 687f3771fb3e6b340a818fa7594b3ac0630fdeaf)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: Ifd14a22a98e7fe273ec28c460b928b8a83c84b66
Reviewed-on: http://review.coreboot.org/7404
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
We'd been putting some data structures like the framebuffer and the cbmem at
the end of memory, but that may not actually be addressable as identity mapped
memory. This change clamps the addresses those structures are placed at so
they stay below 4GB.
BUG=None
TEST=Booted on nyan. Went into recovery mode and verified that there was a
recovery screen. Forced memory size to be 4GB and verified that the recovery
screen still shows up.
BRANCH=None
Original-Change-Id: I9e6b28212c113107d4f480b3dd846dd2349b3a91
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185571
Original-Reviewed-by: David Hendricks <dhendrix@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 63ea1274a838dc739d302d7551f1db42034c5bd0)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I970c1285270cb648bc67fa114d44c0841eab1615
Reviewed-on: http://review.coreboot.org/7397
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
If an asm blob isn't marked as volatile, gcc is free to throw it out if it
doesn't think it produces any values that are actually used. To prevent that
from happening, add volatile to some asm blobs in the nyan romstage code.
BUG=None
TEST=Booted on nyan rev1.
BRANCH=None
Original-Change-Id: I819e068e738e94ea749fcb72bba2eee080e1dfb1
Original-Signed-off-by: Gabe Black <gabeblack@google.com>
Original-Reviewed-on: https://chromium-review.googlesource.com/185610
Original-Reviewed-by: Julius Werner <jwerner@chromium.org>
Original-Commit-Queue: Gabe Black <gabeblack@chromium.org>
Original-Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 76c09581d6ca4dc6c2f9048f599822939f439d11)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Change-Id: I0b32197abf0ddc5f454f9c2415a65d98c60ca48b
Reviewed-on: http://review.coreboot.org/7396
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
This patch changes several cache-related pieces to be cleaner, faster or
more correct. The largest point is removing the old
arm_invalidate_caches() function and surrounding bootblock code to
initialize SCTLR and replace it with an all-assembly function that takes
care of cache and SCTLR initialization to bring the system to a known
state. It runs without stack and before coreboot makes any write
accesses to be as compatible as possible with whatever state the system
was left in by preceeding code. This also finally fixes the dreaded
icache bug that wasted hundreds of milliseconds during boot.
Old-Change-Id: I7bb4995af8184f6383f8e3b1b870b0662bde8bd4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/183890
(cherry picked from commit 07a35925dc957919bf88dfc90515971a36e81b97)
nyan_big: apply cache-related changes from nyan
This applies the same changes from 07a3592 that were applied to nyan.
Old-Change-Id: Idcbe85436d7a2f65fcd751954012eb5f4bec0b6c
Reviewed-on: https://chromium-review.googlesource.com/184551
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 4af27f02614da41c611aee2c6d175b1b948428ea)
Squashed the followup patch for nyan_big into the original patch.
Change-Id: Id14aef7846355ea2da496e55da227b635aca409e
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
(cherry picked from commit 4cbf25f8eca3a12bbfec5b015953c0fc2b69c877)
Signed-off-by: Marc Jones <marc.jones@se-eng.com>
Reviewed-on: http://review.coreboot.org/6993
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
nyan_big: Add 204MHz BCT for bringup, use 1.2V for VDD_CPU
Reviewed-on: https://chromium-review.googlesource.com/183939
(cherry picked from commit a6df76afb5342b805baca749abb8265e15748dc1)
nyan_big: Add initial 792MHz BCT
Reviewed-on: https://chromium-review.googlesource.com/183975
(cherry picked from commit 61d0122fdce6dc9479666bb0a5bc079c6389f78a)
nyan_big: use RAM_CODE[3:2] for ram code
Reviewed-on: https://chromium-review.googlesource.com/184076
(cherry picked from commit 35e5c5e473f871cdc897473a31586afbececd716)
tegra124: support tri-state Board Id
Reviewed-on: https://chromium-review.googlesource.com/183855
(cherry picked from commit 1a9d1bd73aa2cd0c36203b247976ad0d00a360e4)
nyan*: Fix SPI pinmux configuration
Reviewed-on: https://chromium-review.googlesource.com/184281
(cherry picked from commit ac4106b673c285af66d72392bd4a8522aba98489)
nyan_big: Add 4GB 204/792MHz BCTs
Reviewed-on: https://chromium-review.googlesource.com/184159
(cherry picked from commit 5ff002d09f8db0543b58962f6c0d24627fb0937e)
tegra124: Add function for obtaining DRAM size via MC regs
Reviewed-on: https://chromium-review.googlesource.com/184535
(cherry picked from commit d4580c46de649903a266a99eb11c9126ba385b48)
tegra124/nyan*: Obtain DRAM size dynamically
Reviewed-on: https://chromium-review.googlesource.com/184431
(cherry picked from commit a7db71744771decc04cf1966efba70bf4897cfa3)
tegra124: Rearrange iRAM layout to allow more space for romstage
Reviewed-on: https://chromium-review.googlesource.com/184240
(cherry picked from commit 6bdaabbc068146a4516c724b71d31bb777dabcfc)
tegra124: Fix MemoryType field name in SDRAM parameters.
Reviewed-on: https://chromium-review.googlesource.com/185113
(cherry picked from commit 9caccd1e86a8c683402fab87d9f3a49b87496e97)
nyan_big: Initialize SDRAM without BootROM.
Reviewed-on: https://chromium-review.googlesource.com/183624
(cherry picked from commit a1cbc00aa80ec1ea52e833a8e31c8e4b27160e70)
tegra124: move FB_SIZE_MB to a more appropriate location
Reviewed-on: https://chromium-review.googlesource.com/184930
(cherry picked from commit ddea486fd4410394417c4e59039d46a324918bdc)
nyan: Initialize SDRAM without BootROM.
Reviewed-on: https://chromium-review.googlesource.com/185114
(cherry picked from commit 1ff51b580b28553919f91b11b443251b048cf26b)
tegra124: Save SDRAM parameters to PMC registers for LP0
Reviewed-on: https://chromium-review.googlesource.com/182928
(cherry picked from commit 7476b4bd0ecdc312476cce871d22f57915a0bd86)
tegra124: Rewrite SDRAM parameter saving code to be more efficient
Reviewed-on: https://chromium-review.googlesource.com/184388
(cherry picked from commit 25084bd0407624e4b2ff82388c32af1198c501a6)
nyan: Slightly change the way SDRAM parameter files are set up
Reviewed-on: https://chromium-review.googlesource.com/185286
(cherry picked from commit a31887b804f23e031c395113db582cd71f3d1b6d)
Squashed 16 commits for SDRAM support on nyan and nyan_big.
Change-Id: I07419985376277083d62400dd14fe8273f6d5ca8
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6949
Tested-by: build bot (Jenkins)
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
Change-Id: Iac53462ab3621d96ba15e2fde2800212584246db
Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-on: http://review.coreboot.org/7072
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins)
|
|
The nyan_big mainboard is very similar to nyan, but will be different in a few
ways. For instance, the BCT will be different, and the GPIOs may need to be
configured slightly differently.
This change also adds prefixes to the kconfig variables in "choice" blocks
for both boards since having multiple instances of choice blocks with the same
options confuses kconfig even if all of the instances have mutually exclusive
dependencies.
Change-Id: I290a32e47fc118bd4b86d543df617ad324325dbc
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/183532
Reviewed-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d1a453fe1aa68b3d12936dd48cc6c94b54f81579)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6927
Tested-by: build bot (Jenkins)
|
