summaryrefslogtreecommitdiff
path: root/src/mainboard/google/kukui
AgeCommit message (Expand)Author
2020-06-22mb/google/kukui: Add Hynix 4GB discrete LPDDR4X DDR supportHuayang Duan
2020-06-13treewide: Add Kconfig variable MEMLAYOUT_LD_FILEFurquan Shaikh
2020-05-18src: Remove unused 'include <string.h>'Elyes HAOUAS
2020-05-18mainboard/*/*/*.cb: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-18mainboard/*/*/Kconfig*: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-13src: Remove unused '#include <stddef.h>'Elyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-11mb/google/kukui: fix screen scrolling on devices using anx7625Paul Ma
2020-05-11mb/google/kukui: Fix backlight flash white before show logoJitao Shi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-04-22mb/google/kukui: kakadu: update the EDID and sequenceScott Chao
2020-04-11mb/google/kukui: correct board nameScott Chao
2020-04-06mb/google/kukui: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
2020-02-17mb/google/kukui: fine tune the video timing of panel-BOE_TV101WUM_N53Jitao Shi
2020-02-17mb/google/kukui: Add panel for KakaduCasper Chang
2020-01-14mb/google/kukui: Support panels using ANX7625Hung-Te Lin
2019-11-23Kconfig: comply to Linux 5.3's Kconfig language rulesPatrick Georgi
2019-11-15mb/google/kukui: Add new board 'kakadu'Hung-Te Lin
2019-11-12mb/google/kukui: Add new configs 'damu' and 'kappa'Hung-Te Lin
2019-11-01mb/google/kukui: Unselect FATAL_ASSERTElyes HAOUAS
2019-10-20src: Remove unused 'include <string.h>'Elyes HAOUAS
2019-10-09soc/mediatek/mt8183: Run DRAM full calibrationHuayang Duan
2019-10-09soc/mediatek/mt8183: Use cached calibration result for faster bootupHuayang Duan
2019-10-04mb/google/kukui: Extend FMAP to 8MB layoutHung-Te Lin
2019-10-02mediatek/mt8183: Rename fields of struct sdram_paramsYu-Ping Wu
2019-09-30mediatek/mt8183: Init SPM driverDawei Chien
2019-09-30mb: remove test-only HWIDsHung-Te Lin
2019-09-25mb/google/kukui: Add new build target 'Juniper'Hung-Te Lin
2019-09-17google/kukui: Pass reset gpio parameter to BL31Tristan Shieh
2019-09-12mediatek/mt8183: tune EDID for BOE panelPeichao Wang
2019-09-10mb/google/kukui: Enable MT8183_DRAM_EMCPHuayang Duan
2019-08-26google/kukui: Enable CHROMEOS_USE_EC_WATCHDOG_FLAGYu-Ping Wu
2019-08-23mb/google/kukui: Add panel for KodamaPeichao Wang
2019-08-22mb/google/kukui: Add flapjack panelsHung-Te Lin
2019-08-21mb/google/kukui: Move panel description to CBFS filesHung-Te Lin
2019-08-21mediatek/mt8183: add scp voltage initializationHsin-Hsiung Wang
2019-08-16mediatek/mt8183: Add SAMSUNG 4GB LPDDR4X discrete DDR supportHuayang Duan
2019-08-15mb/google/kukui: Report panel manufacturer nameHung-Te Lin
2019-08-15soc/mediatek: Change DSI init commands to take flexible length arrayHung-Te Lin
2019-08-15mb/google/kukui: Support eDP panels via PS8640Hung-Te Lin
2019-08-15mb/google/kukui: Add panel for KodamaPeichao Wang
2019-08-15mb/google/kukui: Add panel for KukuiHung-Te Lin
2019-08-15mb/google/kukui: Add panels for KraneJitao Shi
2019-08-15mb/google/kukui: Initialize displayHung-Te Lin
2019-07-31mb/google/kukui: Enable config for coreboot displayYongqiang Niu
2019-07-21mediatek/mt8183: support more EMCP LPDDR4X DDR bootupHuayang Duan
2019-07-21mb/google/kukui: Introduce a new 'Jacuzzi' familyHung-Te Lin
2019-07-16mediatek/mt8183: add a new configuration for KodamaPeichao Wang
2019-07-11google/kukui: Adjust LCM ID voltagesYu-Ping Wu
2019-07-11board/kukui: Remove ADC tolerance from boardidHung-Te Lin
2019-06-21mediatek/mt8183: support SAMSUNG and MICRON EMCP LPDDR4X DDR bootupHuayang Duan
2019-06-21google/kukui: Increase SPI flash speed to boot fasterMengqi Zhang
2019-06-21mediatek: Add SPI tick_dly settingMengqi Zhang
2019-06-21mediatek/mt8183: Add SPI GPIO driving settingMengqi Zhang
2019-06-21google/kukui: Enable RTCYou-Cheng Syu
2019-06-21google/kukui: Revise FMAP firmware layoutHung-Te Lin
2019-06-21mediatek/mt8183: Calibrate vsim2 to 2.7 VHsin-Hsiung Wang
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
2019-05-07google/kukui: Support sound in boot processJiaxin Yu
2019-05-06google/kukui: Raise the CPU frequencyTristan Shieh
2019-04-22board/kukui: Support ADC value for NCHung-Te Lin
2019-04-17google/kukui: Get write protection status from WP GPIOHung-Te Lin
2019-04-15google/kukui: Include LCD module identifier (LCM ID) into SKU IDHung-Te Lin
2019-04-11google/kukui: Add variant 'Krane'Hung-Te Lin
2019-04-11google/kukui: Use internal CR50_IRQ pull-upYou-Cheng Syu
2019-04-09google/kukui: Configure AP_IN_SLEEP_L correctlyYou-Cheng Syu
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
2019-02-28google/kukui: Add RTC initializationRan Bi
2019-02-27flapjack: use sku_id 0 for un-provisioned boardYH Lin
2019-02-26flapjack: get sku_id from ec (cbi)YH Lin
2019-02-05mb/google/kukui: Add default HWID for Chrome OSHung-Te Lin
2019-01-31google/kukui: Set GPIO_RESET to output modeTristan Shieh
2019-01-29google/kukui: Move some initialization from bootblock to verstageYou-Cheng Syu
2019-01-29google/kukui: Implement HW reset functionTristan Shieh
2019-01-29mediatek: Separate WDT reset function from WDT driverTristan Shieh
2019-01-24mediatek/mt8183: Move some initialization into mt8183_early_initYou-Cheng Syu
2019-01-23google/kukui: Revise FMAP layout for larger CBFSHung-Te Lin
2019-01-23mediatek/mt8183: Add Micron 4GB LPDDR4X DDR supportHuayang Duan
2019-01-13mb/google/kukui: add flapjack on top of kukuiYH Lin
2019-01-10google/kukui: Correct boardid sources and add sku_idHung-Te Lin
2019-01-10google/kukui: Complete board ID ADC valuesHung-Te Lin
2019-01-10google/kukui: Correct boardid init valuesHung-Te Lin
2019-01-09google/kukui: Enable VBOOT_VBNV_FLASH to store VBNV in flashTristan Shieh
2019-01-03google/kukui: Initialize DRAM from romstageJunzhi Zhao
2018-12-05google/kukui: Support TPMTristan Shieh
2018-11-29mediatek/mt8183: Add MT6358 PMIC supportHsin-Hsiung Wang
2018-11-02google/kukui: Add board id supportTristan Shieh
2018-10-25google/kukui: Support recovery modeTristan Shieh
2018-10-17google/kukui: Configure USBTristan Shieh
2018-09-21google/kukui: Set up EC_IN_RW GPIO for ChromeOSTristan Shieh
2018-09-16google/kukui: Configure EMMCTristan Shieh
2018-09-16google/kukui: Notify EC that AP is in S0Hung-Te Lin
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
2018-08-28google/kukui: Init SPI bus for ECTristan Shieh
2018-08-28google/kukui: Set up GPIOs for ChromeOSTristan Shieh
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
2018-07-30google/kukui: Enable eMMC in bootblock.Hung-Te Lin
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 08:38:00 +0000