summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Expand)Author
2021-01-04mb/google/hatch (baseboard): add ACPI backlight supportMatt DeVillier
2020-12-11hatch: enable genesis PCIe/USB devicesJoe Tessler
2020-12-08mb/*: Remove SATA mode config for CNL based mainboardsFelix Singer
2020-12-08soc/intel/cannonlake: Align SATA mode names with soc/sklFelix Singer
2020-12-05mb/google/puff/var/dooly: Update DPTF parametersTony Huang
2020-11-22mb/google/puff/var/dooly: update USB2 type-c strengthTony Huang
2020-11-18mb/google/hatch/var/ambassador: configure FSP option PcieRpSlotImplementedMatt Ziegelbaum
2020-11-18mb/google/hatch/var/ambassador: update fan table and tdp configMatt Ziegelbaum
2020-11-17src: Add missing 'include <console/console.h>'Elyes HAOUAS
2020-11-16mb/google/hatch/dratini: Describe the privacy_gpioRicardo Ribalda
2020-11-13soc/intel/cnl: replace the remains of HeciEnabled by device state in dtMichael Niewöhner
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
2020-11-13mb/google/hatch: Configure IRQs as level triggered for HID over I2CKarthikeyan Ramasubramanian
2020-11-10mb/google/puff/var/dooly: Add WEIDA touchscreen deviceTony Huang
2020-11-09hatch: Create genesis variantMatt Ziegelbaum
2020-11-09mb/google/hatch/jinlon: Describe the privacy_gpioRicardo Ribalda
2020-11-09soc/intel/*/chip: Remove unused devicetree entryPatrick Rudolph
2020-11-09mb/google/puff/var/dooly: Set default I2C0 frequencyTony Huang
2020-11-02mb, soc/intel: Reorganize CNVi device entries in devicetreeFurquan Shaikh
2020-10-29hatch: Create ambassador variantMatt Ziegelbaum
2020-10-28mb/google/nightfury: Set internal pull-down for GPP_D19Seunghwan Kim
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
2020-10-14mb/google/puff/var/dooly: Enable Ambient Light Sensor (ALS)Tony Huang
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
2020-10-13mb/google/puff/var/dooly: Update devicetree for audio and display configurationTony Huang
2020-10-13mb/google/puff/var/dooly: Update devicetree to remove unused devicesTony Huang
2020-10-13mb/google/puff/var/dooly: Update devicetree for USB configurationTony Huang
2020-10-13mb/google/puff/var/dooly: Update GPIO table for project changeTony Huang
2020-10-12mb/google/puff: Enable SATA0 on wyvernSam McNally
2020-09-30mb/google/puff: Update DPTF parameters for faffyDavid Wu
2020-09-09mb/google/puff: Increase DPTF parameters for faffyDavid Wu
2020-09-08src/mb/google/hatch: remove "sushi" variant.Paul Fagerburg
2020-09-08hatch: Create dooly variantTony Huang
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
2020-09-02mb/google/puff/var/noibat: Update DPTF parameters for noibatWisley Chen
2020-09-02mb/google/puff: Update DPTF parameters and TCC offset for faffyDavid Wu
2020-09-01mb/google/puff: Update DPTF parameters for kaisa and duffyDavid Wu
2020-09-01mb/google/puff: Convert ASL file to new DPTF dt implEdward O'Callaghan
2020-08-31mb/google/puff: Set TCC offset to 5 for kaisa and duffyDavid Wu
2020-08-27mb/google/puff: Update psyspl2 to 97% of adapter ratingDavid Wu
2020-08-23soc/intel/cnl: Configure FSP option PcieRpSlotImplementedNico Huber
2020-08-18src: Remove unused 'include <delay.h>'Elyes HAOUAS
2020-08-07soc/intel/cnl: Set Heci1Disable depending on devicetree configFelix Singer
2020-08-06mainboard/google/puff: Remove second temp sensorAndrew McRae
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
2020-07-27mb/google/hatch: Add smart battery I2C passthrough for DratiniTim Wawrzynczak
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
2020-07-20mb/google/puff: update USB3 gen2 parametersTim Chen
2020-07-14mb/hatch: Fix Puff baseboard missing mainboard symbolsEdward O'Callaghan
2020-07-14mb/google/hatch: Set SA slow slew rate to 1/2 for jinlon/dratiniWisley Chen
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in WyvernEdward O'Callaghan
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in NoibatEdward O'Callaghan
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in FaffyEdward O'Callaghan
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in KaisaEdward O'Callaghan
2020-07-03mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in DuffyEdward O'Callaghan
2020-07-02mb/google/faffy: update DPTF parametersTim Chen
2020-07-01mb/google/nightfury: Override VBT selection for nightfury 2nd skuSeunghwan Kim
2020-06-30mb/google/hatch: Allow USB2/3 wakeups to (un)plug events in dtEdward O'Callaghan
2020-06-28mb/google/faffy: Enable USB2 port6Tim Chen
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
2020-06-26Revert "Mushu: Enable PCIe 1d.4 to enable dgpu"Shelley Chen
2020-06-26mb/google/hatch: Set Reset Power Cycle Duration for hatch platformsSridhar Siricilla
2020-06-23hatch: Create wyvern variantPaul Fagerburg
2020-06-23hatch: Create faffy variantEdward O'Callaghan
2020-06-23palkia: separate the gpio pins control for the second touchZhuohao Lee
2020-06-23mb/google/hatch: Make puff and variants share common mainboard.cEdward O'Callaghan
2020-06-22mb/google/hatch: Make puff and variants share common dptf.aslEdward O'Callaghan
2020-06-22mb/google/hatch: Make puff and variants share common ec.hEdward O'Callaghan
2020-06-17mb/google/hatch: mushu: Add F75303 temp sensor to dptfPuthikorn Voravootivat
2020-06-17mb/google/puff: add MST and LSPCON details to variants devicetreeShiyu Sun
2020-06-14mb/google/puff: add MST and LSPCON details to devicetreeShiyu Sun
2020-06-14mb/google/hatch/vr/puff: Set up PL2 and PsysPL2Tim Chen
2020-06-14mb/google/hatch: Switch USB2 port1 and port3 on NoibatEdward O'Callaghan
2020-06-12mb/google/hatch: Remove unused USB2 port from NoibatEdward O'Callaghan
2020-06-12mb/google/puff: Update i2c[2] and i2c[3] rise and fall timesSam McNally
2020-06-09mb/google/hatch/vr/puff: Set up PL2 and PsysPL2Gaggery Tsai
2020-06-02src: Remove unused 'include <bootstate.h>'Elyes HAOUAS
2020-06-01mb/google/hatch: Add Noibat variantEdward O'Callaghan
2020-05-28Remove new additions of "this file is part of" linesElyes HAOUAS
2020-05-26mb/google/nightfury: Enable max98390 ampSeunghwan Kim
2020-05-26Mushu: Enable PCIe 1d.4 to enable dgpuShelley Chen
2020-05-26cannonlake: update processor power limits configurationSumeet R Pawnikar
2020-05-26intel/cannonlake: Implement PCIe RP devicetree updateNico Huber
2020-05-18mb/google/hatch: Add Mushu variant specific DPTF parametersJohn Su
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
2020-05-01mb/google/hatch/vr/puff: Add psys_pmax calculationTim Chen
2020-05-01Helios: Update DPTF settings for smooth fan speed controlSumeet R Pawnikar
2020-05-01mb/google/nightfury: Tune the usb2_port[0] strengthSeunghwan Kim
2020-04-30mb/google/puff: update USB2 strengthTim Chen
2020-04-27mb/google/hatch/var/jinlon: Update DPTF parametersWisley Chen
2020-04-25mb/google/hatch/var/jinlon: Tune i2c frequency under 400 KHzWisley Chen
2020-04-24mb/google/hatch: Change baseboard EC wake & SCI masks to match kohakuTim Wawrzynczak
2020-04-24mb/google/hatch: Add Duffy variant specific DPTF parametersEdward O'Callaghan
2020-04-24mb/google/hatch: Add Kaisa variant specific DPTF parametersEdward O'Callaghan
2020-04-23mb/google/puff: Switch USB2 port1 and port3Tim Chen
2020-04-22mb/google/puff: comment schematics changes for USBKangheui Won
2020-04-21mb/google/puff: configure USB PLD groupsPeter Marheine