summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants
AgeCommit message (Collapse)Author
2019-07-31mb/google/hatch: Initialize SSD GPIOs in bootblockShelley Chen
Moving these to bootblock as we are seeing some instances where devices are rebooting into the recovery broken screen with the 0x5a error (no bootable storage device in system). This needed to be done for KBL platforms and never got transferred to hatch. Please reference https://review.coreboot.org/c/coreboot/+/23647 BUG=b:137681648 BRANCH=None TEST=Run autotest faft_bios and faft_ec suites Change-Id: I8cf09c26d77d890f5d0490709504e9edf485a93f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34484 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/kohaku: Update DPTF parameters and TDP PL1/PL2Seunghwan Kim
Applying first tuned DPTF parameters and TDP PL1/PL2 values for kohaku. More fine-tuning will happen later. BUG=b:1704071 BRANCH=none TEST=build Change-Id: I8a87ff88e8e14ada473f9da59c15cdc779cbb108 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34397 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-31mb/google/hatch/variants/hatch: Set PCH Thermal Threshold value to 77 deg CSumeet Pawnikar
PMC logic shuts down the PCH thermal sensor when CPU is in a C-state and DTS Temp <= Low Temp Threshold (LTT) in case of Dynamic Thermal Shutdown when S0ix is enabled. BUG=133345634 BRANCH=None TEST=Verified Thermal Device (B0: D20: F2) TSPM offset 0x1c [LTT (8:0)] value is 0xFE on Hatch. Change-Id: Ib20fae04080b28c6105e5a187cc5d7a55b48d709 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33147 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-30mb/google/hatch: Enable chipset_lockdown coreboot config for hatchSubrata Banik
This patch enables lockdown configuration for hatch family (hatch, kindred, helios and kohaku) BUG=b:138200201 Change-Id: Ia6dc90156dc76fde490b25cf833da3cf80f664f2 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34514 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-26mb/google/hatch/helios: Update GPIO and device treeTim Wawrzynczak
Based on updated schematics, change polarity of USI_INT, and add the reset and enable GPIOs to the touchscreen ACPI node. The stop GPIO can't be used with the current implementation of _ON, as the way it's wired will cause power sequencing to fail. BUG=b:137133194, b:138240502 BRANCH=none TEST=Compiles, don't have next board rev to test with Change-Id: I1dfb8e649418e4c5e9b897fb4bc11393adc21ea2 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34528 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
BUG=b:136606255 Change-Id: I8fa29dc96e7a066f6708ede6b7bee2382c7008cb Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/hatch: Remove hatch_whlPhilip Chen
Hatch_whl variant is deprecated. BUG=b:137180390 Change-Id: I88fa201398ad5fb70da48d022f1ae86fecafa660 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34432 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-21mb/google/hatch/var/kindred: Implement variant_devtree_update()David Wu
This change provides an implementation of variant_devtree_update() for kindred that disable eMMC controller when SKU ID = 1 or 3 BUG=b:132918661 TEST=Verify eMMC is disabled when SKU ID = 1 or 3 Change-Id: I8ccb4dae54f223881e0ced9e034bf45b994cc6f2 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34400 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-21mb/google/hatch: expose get_board_sku() as globalDavid Wu
BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I217e13acd337034554ff055e8bf5011558d1f8bf Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34431 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-21mb/google/hatch: Add support for variant_devtree_update()David Wu
This change adds support for variant_devtree_update() that allows variant to update device tree. BUG=None TEST=emerge-hatch coreboot chromeos-bootimage Change-Id: I0e9ad360b6c02c83fe49387ce7bc66d56448ffb9 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34399 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-19mb/google/hatch: Fix SD card is detected as read only issueSubrata Banik
This patch configures GPIO pin GPP_G7 as NF1 with internal pull down. As per schematics SD host controller SD_WP pin is not connected to uSD card connector. Configured gpio pin as NF1 with internal pull down in order to overcome gpio default state in hatch which makes SoC SD_WP pin is enable. BUG=b:137729527 BRANCH=None TEST=Able to write/read data to/from sd card after mounting card device. Change-Id: I0187267670e1dea3e1d5e83d0b29967714d6065e Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34396 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-19mb/google/helios: Add ALC1011 in device tree to enable speaker ampsSathya Prakash M R
Following changes are done to enable ALC1011 codec on Helios 1. ACL1011 4 devices to I2C4 2. GPIO H13 is set to GPO as per schematics Verified SSDT table and i2cdetect from kernel. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Change-Id: I0d71e3bd2d4493d059a33023c1afe1b630181d4f Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33932 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-18mb/google/hatch/var/helios: Implement variant_memory_sku()Furquan Shaikh
This change provides an implementation of variant_memory_sku() for helios that overrides memory ID 3 and 4 to 0 and 1 to workaround the incorrect memory straps in hardware for board id 0 and unknown. BUG=b:133455595 Change-Id: I38fab1f91decac5d0a146e5a6c74e88f677af305 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-18mb/google/hatch: Add support for variant_memory_sku()Furquan Shaikh
This change adds support for variant_memory_sku() that allows variant to return memory SKU ID. Current implementation of memory_sku() is renamed to weak implementation of variant_memory_sku(). Functionally this change should be the same as before for all hatch variants. This function will be overriden by helios in a follow-up CL. BUG=b:133455595 Change-Id: I509c263ec08e0060c12ef1ea9fed673f1e3f3a41 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34251 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-18mb/google/hatch: Add FP MCU to kohaku device treeShelley Chen
BUG=b:137654283 BRANCH=None TEST=Make sure can see FP MCU spidev in dmesg on bootup Change-Id: Iffa13f29e1abdf430e8dc4a0ee1a931a9e69168c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34371 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-18mb/google/hatch: Disable wireless chargingSubrata Banik
This patch makes VGPIO_3 GPIO PIN output and low independent of cnvi is connected or not. BUG=b:123062346 BRANCH=None TEST=boot up Hatch device and make sure VGPIO_3 gpio pin is driven low. Change-Id: I629b99676f56747de1b244724709e14069250097 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34376 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-16mb/google/hatch: Disable Bluetooth in bootblock and enable in ramstageShelley Chen
Currently, bluetooth FW is not loaded after a reboot. In order to do this, we have to disable the bluetooth disable gpio (GPP_C14) in bootblock and re-enable it in ramstage. BUG=b:137307516 BRANCH=None TEST=boot up Hatch device and make sure (in dmesg) that proper bluetooth FW in loaded Change-Id: Ic5e447d9de57790f7a100e9e03f36b047c19d8f9 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34354 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-13mb/google/hatch: Fix trackpad configuration in overridetreeFurquan Shaikh
Hatch and variants use GPP_A21 for trackpad IRQ and wake. Fix overridetree.cb to advertise the right IRQ. Change-Id: Ib87c858b89e8726c3bc80f83be0729ef4625268e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34248 Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Update AC/DC loadline valuesRizwan Qureshi
Update the AC/DC loadline values for all domains. Using the same values as in arcada. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: If8ea48794d11dc68e40e6504c0d46a2b273a8ab6 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33371 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-11mb/google/hatch/variants: Fix nonworking touch padFrank_Chu
Correct ELAN Touch pad IRQ GPIO to GPP_A21 BUG=b:135507215 BRANCH=none TEST=emerge-hatch coreboot chromeos-ec chromeos-bootimage Signed-off-by: Frank_Chu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I60816a4652fa39ab2a91034b268efe8f84a13e17 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33954 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-11mb/google/hatch: Disable GPIO community dynamic clock gatingTim Wawrzynczak
The dynamic clock gating is causing boards to miss interrupts whose pulses are shorter than 4us. Disable it using FSP UPDs. BUG=b:130764684 BRANCH=none TEST=Compiles Change-Id: I8f1ec8f7c31192bce2a761ec99b86638435dc27c Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Evan Green <evgreen@chromium.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-07-11mb/google/hatch: Fix interrupt trigger type for GPP_H0(HP_INT_L)Furquan Shaikh
HP_INT_L(GPP_H0) is configured for GPIO IRQ instead of APIC IRQ since it needs to trigger on both edges. With GPIO IRQ, it is necessary to configure the trigger type in coreboot to match the ACPI configuration. This is because: 1. ACPI configuration is used by intel-pinctrl driver in Linux kernel to re-configure the trigger type for the pad in GPIO DW0 config register. This is done when kernel driver probes and requests irq for its device. 2. On resume from S3, the pad configuration gets reset and coreboot sets the trigger type to LEVEL. However, kernel driver does not probe again. This results in the trigger type being configured incorrectly. This change updates the GPIO configuration for GPP_H0 to set the same trigger type as advertised in ACPI for the kernel. BUG=b:132672011 TEST=Verified that S3 works fine. Verified that interrupt on GPP_H0 works fine on boot as well as after suspend/resume. Change-Id: Ieb44c7403a2f4911b4a8f422053dee8bcfb91d85 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34181 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-08mb/google/hatch: Set GPP_D9 as enable pin for Goodix Touch Screen andFrank Wu
increase reset off delay time Goodix touchscreen cannot work in normal mode because PP3300_TOUCHSCREEN_DX dropped. Configure GPP_D9 as enable pin in the devicetree.cb to fix the power sequence. Increase reset_off_delay time from 1ms to 3ms to met the HW requirement. BUG=b:135287161 BRANCH=None TEST=local build and measure sequence with Goodix touch screen Change-Id: I33140869990aa4715c780b0fa322921e450530ef Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33808 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: EricR Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch: Update GPIO settings for SD card and SPI1 Chip selectKrishna Prasad Bhat
This patch updates the following GPIO settings. 1. Set Native termination for GPP_G0 - G4 SD card pins. 2. Set GPP_B19 to NF1. BUG=b:123907904 TEST=Verified SD card functionality on hatch. Checked for SD detection, transferred files to and from SD card. Change-Id: I4549ac7377d7f58f51cda0eb96a62604fd31d2f2 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-07-07mb/google/hatch/var/kindred: Add Raydium touchscreen supportDavid Wu
Add Raydium controller BUG=b:135728282 BRANCH=master TEST= 1. FW_NAME="kindred" emerge-hatch coreboot chromeos-bootimage 2. boot up on kindred DUT to check touchscreen device by evtest /dev/input/event3: Raydium Touchscreen 3. Raydium TS is working Change-Id: Id963300ab0dadcb78786c5a1328c2a4098a48a05 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33857 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-07mb/google/hatch/var/kindred: Update ELAN GPIO/IRQ and add Synaptics TouchpadDavid Wu
Update ELAN GPIO and IRQ setting and add Synaptics Touchpad BUG=b:132708463 BRANCH=None TEST=Verify ELAN/Synaptics touchpad is working fine. Change-Id: I883ce2e50ca5c6bd2b1ca76cbe24177055cc5d60 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-07mb/google/hatch/variants/kindred: Enable eMMC supportDavid Wu
Enable eMMC support for kindred. Cq-Depend: chromium:1666982 BUG=b:135464155 BRANCH=none TEST=Boot kindred onboard eMMC. Change-Id: I040af6da30313f8dd59e3ef910b290922e090cdc Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33618 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-02mb/google/hatch: Set trackpad irq and wake to GPP_A21Shelley Chen
Previously, We had to use GPP_A21 for trackpad wake and GPP_D21 for trackpad interrupts due to ITSS not honoring the INVERT config. Now that's fixed, we can configure trackpad wake and interrupts on GPP_A21 only. BUG=b:130436471 BRANCH=None TEST=1. boot a hatch device and make sure we can move the cursor with the trackpad 2. Run powerd_dbus_suspend and wake by clicking on the trackpad and ensure through "mosys eventlog list" that the wake source is the trackpad.\ 3. Run "echo mem > /sys/power/state", wait until device goes into S3, click trackpad to ensure device wakes. Change-Id: I26a99206c42ba442f91ae577b98366fc2fd6c0ca Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33820 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-07-02mb/google/hatch: Add INVERT to all IOAPIC padsShelley Chen
Now that ITSS config is fixed, we can set the IOAPIC pad configs correctly. BUG=b:123967687 BRANCH=None TEST=Make sure Hatch is booting and tested out trackpad to make sure can move cursor and wake by clicking on the trackpad after running powerd_dbus_suspend. Change-Id: I0b125996338b6f16e03b7ca184f6337c696a5f64 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33819 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-28mb/google/kohaku: Correct trackpad i2c addressSeunghwan Kim
Correct i2c address of trackpad. It should be 0x20. BUG=None BRANCH=None TEST=Verified trackpad works on pre-evt system Change-Id: I7ded21ce8ff9e907e436777a27edb4273512011d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-26mb/google/hatch: Add a GPIO to enable/disable FPMCU powerPhilip Chen
A FPMCU power-control pin (GPP_C11) is added to the latest hatch reference schematic. Even though this is not implemented in hatch rev1 board, the future hatch family boards with FPMCU should all have this control pin. On the old boards without this control pin, GPP_C11 is a floating TP, and thus this patch should be backward-compatible. BUG=b:130307667, b:135216932 TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I6a84eeb6aab562258e749a8a5d09dadfa0e43587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-26mb/google/hatch: Remove pulls on NC padsFurquan Shaikh
There is no need to add internal termination (PU/PD) on the not-connected pads. This change gets rid of the terminations on the NC pads. Change-Id: I3df538d7127e5ef75e6e6ff9db3524e26f0450ed Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33570 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-06-26mb/google/hatch/variants/baseboard: Update PL2 power limit valueSumeet Pawnikar
Update PL2 power limit value from 44W to 64W. BUG=None BRANCH=None TEST=Build and Boot hatch EVT Change-Id: I3f4b5ab8bf0ce9464c322c148843f5a3e8d706d9 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33662 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-06-21mb/google/hatch/variants/kindred: Update memory strap GPIOsDavid Wu
According to the latest schematic (b:127996858#comment38), MEM_CONFIG_0 --> GPP_H19 MEM_CONFIG_1 --> GPP_H22 MEM_CONFIG_2 --> GPP_F10 MEM_CONFIG_3 --> GPP_F3 BUG=none BRANCH=none TEST=Boot kindred proto board Change-Id: Ib79f9454116583a94fe1fd53a37ed928d32988d5 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33617 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-06-21mb/google/hatch: Do not pull down GPP_F2 internallyPhilip Chen
There is already an external pull-up/down resistor tied to this pin to identify if the board is single-channel or dual-channel memory SKU. BUG=b:135496271 BRANCH=none TEST=build Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: Ie218657fd9dde113ab26cf5551d1dff1b6e392b6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/33583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-20mb/google/hatch: Remove unused USB2 port5 from baseboard devicetreeAamir Bohra
Hatch newer board revision do not use USB port5 for discrete BT. Hence remove the port configuration and UBS2 P5 asl entry. The older board version would continue to use USB2 P5 hence moved the entry to overridetree.cb Change-Id: I98297d6b81e3184b7b0a14710f3790f5df30d68b Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Subrata Banik <subrata.banik@intel.com>
2019-06-19mb/google/hatch/variants/hatch: Adjust all I2C CLK to meet specJohn Su
After adjustment on Hatch Touch Pad CLK: 383.4 KHz Touch Screen CLK: 381.6 KHz SAR Sensor CLK: 392.0 KHz Audio codec CLK: 386.0 KHz BUG=b:134911522 BRANCH=master TEST=emerge-hatch coreboot chromeos-bootimage measure by scope with hatch. Change-Id: Iee2b692c268381af267b70e92a577ac89ce41cbb Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33384 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-16mb/google/hatch: Move memory strap GPIOs under variant gpio headerAamir Bohra
Move the memory strap gpios to variant/gpio.h, as the memory straps are different for helios. Change-Id: I1833c9539687011ee27fd3e88c0581e30ca59354 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
Helios has a number of GPIO changes w/r/t to its baseboard. Override early, sleep and normal GPIOs as appropriate. BUG=b:135257452 BRANCH=none TEST=Compile only (no boards to test with) Change-Id: I45793ad6515df5af5b925d92106bd943374353d4 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33485 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-14hatch: Fix pen eject wake polarityTim Wawrzynczak
The gpio_key wakeup_event_action in the ACPI tables was backwards, causing devices to wake up on pen insertion instead of removal. Changed to EV_ACT_DEASSERTED. BUG=b:134547896 BRANCH=none TEST=Verified in OS, device only wakes up on pen removal Change-Id: I0816ed9fb23cf00fd8e40bcdd25ff7a9f48badbd Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33427 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
Update Helios device tree override to match schematics. BUG=b:133182138 BRANCH=none TEST=Compiles Change-Id: I3d15fc43651a289d16ffb3cfadaea8f786e858fc Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33050 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
Change the SPD makefile to use the LPDDR3 SPDs. Set up the arrays for mapping SoC DQS pins to LPDDR3 pins. BRANCH=none BUG=b:133455595 TEST=`FEATURES="noclean" FW_NAME="helios" emerge-hatch chromeos-ec depthcharge vboot_reference libpayload coreboot-private-files intel-cmlfsp coreboot-private-files-hatch coreboot chromeos-bootimage` Ensure the firmware builds without error. Change-Id: Iebaba2ec65dfcf36674b4733b421ada107b22b09 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33456 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-13mb/google/{hatch, sarien, arcada}: Make HECI1 chip config disableSubrata Banik
This patch is not actually disabling HECI1 as it requires a dedicated FSP UPD for WHL/CML SoC code to set this HECI1 chip config. Change-Id: Ia88f3315a9dc3365d0acc13ed887e7c596c97c91 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-12mb/google/hatch: Disable dynamic clock gating for cr50's GPIOSubrata Banik
Disable dynamic clock gating for the community cr50's IRQ lives on. That IRQ is pulsed very quickly, and with clock gating enabled pulses tend to be missed. This is expecially true on the default 0.0.22 firmware that cr50 comes with out of the factory. BUG=b:130764684 b:130338605 BRANCH=None TEST=Boot hatch with cr50 "intap" firmware that can vary the pulse width, observe that even with sub-microsecond pulses no IRQs are missed. Change-Id: I34d14fb7cc97e33eecfda2c99cc53a541c87662d Signed-off-by: Subrata Banik <subrata.banik@intel.com> Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-06-04mb/google/hatch: Enable LTR for PCIe portsFurquan Shaikh
Enable LTR for NVMe and WiFi PCIe ports so that they can use ASPM L1.2 BUG=b:134195632 TEST=Verified L1 substate with lspci on hatch: Before: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2- ASPM_L1.1+ After: L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ Change-Id: I7fce60897b78dde12747ac7fb857c988d16118ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33161 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-31mb/google/hatch: Create helios variantTim Wawrzynczak
Created helios (hatch variant). Currenly copied from kohaku. Helios- specific changes will come later. BUG=b:133182138 BRANCH=none TEST=none Change-Id: I9d151621a1c42e6f3cadb288f7ea476828c059b5 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32919 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-05-31mb/google/hatch: Create kindred variantPaul Fagerburg
Create the Kindred variant of Hatch by taking a copy of the Hatch files as placeholders. Kindred-specific changes will happen in future CLs. BUG=b:133181366 BRANCH=NONE TEST=util/abuild/abuild -p none -t google/hatch -x -a make sure the build includes GOOGLE_KINDRED Change-Id: I09ad3da0505d599fc3797d7fa24b4dc170dcd18b Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-23mb/google/hatch/variants: Fix DPTF sensor IDsEvan Green
There are indeed two temperature sensors hooked up to the EC, but they are indexed as 0 and 1, not 1 and 2. BUG=b:132999028 TEST=Boot hatch with hardened EC, observe no more index overflows Change-Id: Ia7f503bc1dc941635db52fce40f217bf34da6d2b Signed-off-by: Evan Green <evgreen@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2019-05-21mb/google/kohaku: Set ACPI_GPIO_IRQ_EDGE_BOTH for headset INTKane Chen
Currently, GPP_H0 gpio input rout is set to GPI_INT. So, ACPI_GPIO_IRQ is required for GPP_H0 in devicetree This change also aligns hatch's setting. BUG=b:131742713 TEST=headset is working Change-Id: Ie1264641bc4dfa5f98b6dab2d6f2133a6f9cbdb8 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ben Kao <ben.kao@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-05-20mb/google/{arcada, hatch, sarien}: Override FSP default GPIO PM configurationSubrata Banik
sarien/arcada: GPIO_COMM_0/2/3/4: Enable gpio community all PM configuration GPIO_COMM_1: Disable RCOMP clock gating due to GPP_D18 IRQ mapped for H1 TPM. hatch: GPIO_COMM_0/1/2/3: Enable gpio community all PM configuration GPIO_COMM_4: Disable RCOMP clock gating due to GPP_C21 IRQ mapped for H1 TPM. BUG=b:130764684 TEST=H1 TPM interrupt working find and able to boot from fixed boot media Change-Id: Ia4d5483847a4d243b9038119d4bb5990591cc754 Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32848 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-20mb/google/hatch: Change SD_CD# reset config to PLTRSTKrishna Prasad Bhat
The system should boot fine to OS on pressing power button before the system enters G3. However, on hatch, we observe that the system waits for few seconds at "Starting kernel" and then resets, with SD card tray inserted and SD_CD# pad reset config set to DEEP. Hence configuring SD_CD# pad reset config to PLTRST. BUG=b:129933011 TEST=Built and verified on hatch. Change-Id: Ic4466b96332f095ff39b28d98607e95fc3d12d6a Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-05-15soc/intel/cannonlake: Support different SPD read type for each slotPhilip Chen
Also clean up cannonlake_memcfg_init. The major changes include: (1) Add enum 'mem_info_read_type' to spd_info. (2) Add per-dimm-slot spd_info to cnl_mb_cfg. (3) Setup memory config for each slot independently. (4) Squash meminit_memcfg_spd(). BUG=chromium:960581, b:124990009 BRANCH=none TEST=boot hatch, hatch_whl, and kohaku Change-Id: I686a85996858204c20fd05ef24787a0487817c34 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32513 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-10mb/google/hatch: Fine tune Goodix touch screen timingDtrain Hsu
According to Goodix GT7375P datasheet, reduce Goodix touch screen timing. BUG=b:129727745 BRANCH=None TEST=local build and tested with Goodix touch screen worked under coldboot (10 times), warmboot (10 times), S3 (10 times). Change-Id: I4bf081bab5e89d3ce336c6432da5ba71279fa98d Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32665 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com>
2019-05-06mainboard/google/hatch: Enable PEN_EJECT_L as wake & notify source.Tim Wawrzynczak
Updated GPP_A8 to be a GPI and SCI source, to support both wake and notifications. BUG=b:128941098 BRANCH=none TEST=Compiles, simulated pen eject with PCH_INT_L signal. Both evtest and waking from s0ix confirm this works. The output of /proc/interrupts confirms the correct interrupt is triggered. Change-Id: I080fb3cbfb3e2f55209ca31824b00ca820d70f78 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32487 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-30mb/google/hatch: Modify IRQ configuration to enable RT5682 headset INTNaveen Manohar
Patch corrects IRQ and GPIO configuration for RT5682 codec's Jack INT. Switching IOAPIC to GpioInt because ACPI Interrupt() doesn't support jack triggering on both edges. BUG=b:130180492 TEST=build and boot on a CML EVT board. Use evtest & verify headset jack detection functions as expected. Change-Id: Ia9bf8d554b54554f9ac1e78fd44a508964c8a14d Signed-off-by: Naveen Manohar <naveen.m@intel.com> Suggested-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32474 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mb/google/hatch/variants/baseboard: remove unused dqs_mapPaul Fagerburg
The dqs_map array is used only for LPDDR3 and LPDDR4. It is not used for DDR4, and so it can be removed from the baseboard memory initialization code. BRANCH=none BUG=b:129706819 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Change-Id: I07fac3097d68f37b4630d3f0010f987da2f03bd7 Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32484 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-29mb/google/hatch/variants/kohaku: Add support for LPDDR3 configurationsPaul Fagerburg
First configuration supported is 8 GB system memory: 4 x 2 GB (K4E6E304ED-EGCG). BRANCH=none BUG=b:129706819 TEST=ensure the firmware builds without error; I don't have hardware available to test this just yet. Signed-off-by: Paul Fagerburg <pfagerburg@chromium.org> Change-Id: Ibd92d585118ff75492e8a7188dcdb2a286836d56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-25mb/google/hatch/: FPMCU not rebooted when DUT rebootsTim Wawrzynczak
Add FP_RST_ODL to early GPIO table, configured as low, so that the FPMCU will get reset when coreboot enters bootblock. BUG=b:130229952 BRANCH=none TEST=Compiles (no Hatch device w/FP to test) Change-Id: I8a8d8cc2c560f6518337f7500575fdc2265b6347 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32419 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2019-04-25mb/google/hatch: Pull up GPP_C13 for hatch and hatch_whlPhilip Chen
On EC end, we want to change this pin from push-pull to open-drain. And since there is no external pull-up resistor on the board, we'll have to configure this pin as internal-pull-up on AP end. BUG=b:129306003 TEST=None Change-Id: Ibc1f89fc25773220db009c6571400b01390dd756 Signed-off-by: Philip Chen <philipchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-24mb/google/kohaku: Update overridetree.cbTim Wawrzynczak
Add common SoC config. Disable PCIe WiFi. Add digitizer. Turn off native SD card interface. No WWAN. Add DA7219 driver to Kconfig. BUG=b:130310626 BRANCH=none TEST=compiles (no Hatch ref or Kohaku device to test) Change-Id: I17d5ba6ce4ec412384e4a1678474b8d26499ba40 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32405 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-24mb/google/hatch: Move SD card detect GPIO.Tim Wawrzynczak
Not all Hatch variants utilize the SoC's native SD card support. Move the support to board-specific variants instead of the base device tree. BUG=none BRANCH=none TEST=compiles (no Hatch device to test with) Change-Id: Iae24114aad2c4d042c25da6f8cb740ccc8960082 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32417 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-24mb/google/hatch/var/kohaku: Skip UART0 config in FSPFurquan Shaikh
Similar to hatch(CB:32278), this change sets SerialIo config for UART0 to PchSerialIoSkipInit to skip initialization in FSP. This change also adds a device to kohaku override tree to ensure that the settings in it take effect. BUG=b:130310626 Change-Id: Ia25b45811be26d55fc0019e4cd22eb7310b5a4c4 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32398 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-19kohaku: mb/hatch/gpio: Scrub Kohaku GPIOs.Tim Wawrzynczak
Ensure Kohaku GPIO pins are configured correctly w/r/t Hatch. Implement the base/override model for GPIOs (regular and early). The 'hatch' baseboard contains the base GPIOs, and variants can override individual pads. BUG=b:129707481 BRANCH=none TEST=Compiles for all variants. Change-Id: Ie5c83a0538d367ea11e9499f21cea41891d7a78e Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-15mb/google/hatch: Update sleep signal assertion widthsRizwan Qureshi
Based on the power rail discharge times measured on hatch, update the assertions widths that have to be programmed in SoC. BUG=b:129328209 TEST=warm/cold reboot and S3 are working fine on hatch. Change-Id: I3c6dce0a942e6dcd9e55ef5e58a7e9e8d2b0a1e3 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32266 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-13mb/google/hatch: Restore Goodix Touch ScreenEric Lai
Restore Goodix devicetree config because of the missing Goodix config when moving from baseboard devicetree to board level overridetree. And move PENH from I2C#2 to I2C#1. BUG=b:124460799 BRANCH=None TEST=local build and tested with Goodix touch screen Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: Ic028c5d7b687a069d7f0510897bea91dca58e91f Reviewed-on: https://review.coreboot.org/c/coreboot/+/32265 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-12mb/google/hatch: Use GPIO IRQ for sx9310 deviceFurquan Shaikh
This change uses GPIO IRQ instead of IOAPIC for GPP_A0 pad which is the interrupt line for sx9310. This is required because IRQ# used by GPP_A0 is allocated for PIRQ which does not allow IRQ# sharing. Additionally, this change also configures GPP_A6 for GPIO IRQ. GPP_A6 is currently unused in the devicetree. BUG=b:129794308 TEST=Verified that there are no interrupt storms on GPP_A0. Change-Id: Ibb510a647391c0d9cb854d23656bb4b1cb7756ab Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-04-12mb/google/hatch: Configure reset config to PLTRST for IOAPIC padsFurquan Shaikh
This change configures reset config for all pads routed to IOAPIC as PLTRST. This is required to ensure that the internal logic of the GPIO gets reset any time the platform enters S3 or powers off and avoids any interrupt storms on boot-up. BUG=b:129933011 TEST=Verified that there are no interrupt storms on boot-up from S5. Change-Id: Ib790280c9f1410fa18746d4d7d2a5027afd7585b Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32268 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2019-04-12mb/google/hatch: Skip UART0 config in FSPFurquan Shaikh
UART0 is already configured in coreboot, so this change sets SerialIo config for UART0 to PchSerialIoSkipInit to skip initialization in FSP. BUG=b:130325418 Change-Id: Ifc88f4fa11bff2144417d5194776c15f9f7b60ac Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32278 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subrata.banik@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2019-04-09mb/google/hatch: Add ACPI support for BT reset functionalityTim Wawrzynczak
Expose the Bluetooth BT_DISABLE_L signal in Hatch's devicetree, on both USB2 port 5 and 10. BUG=b:123293169 BRANCH=none TEST=compiles, verified kernel is able to find the reset-gpio Change-Id: I6e4d9786e44f12da71533b6740fdd390f3a57e40 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32216 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04mb/google/hatch: Move I2C/SPI options to override treeFurquan Shaikh
This change moves the I2C/SPI devices and configs which do not apply to all variants to override tree. Currently, there are just two variants. However, as we prepare to add more variants, these devices need to be moved out of the base devicetree. BUG=b:129728235 TEST=Verified that I2C/SPI devices are present in static.c for hatch and hatch_whl. Change-Id: I9426f6bf5f8514de5f1889e22e57105749fd92de Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32138 Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-04mb/google/hatch: Change the DEVSLP reset config to PLTRSTRizwan Qureshi
In S3 the PCH is driving the DEVSLP signal low, assuming that the SATA device is already powered off. However on hatch the SATA power is still enabled. And, since DEVSLP is low, this causes the SATA device to not enter low power state. The fix here is to set the pad config to be reset on PLTRST assertion which will cause the pin to be high impedance state and will be pulled up by the SATA device. BUG=b:126611255 BRANCH=None TEST=Make sure that S3 and S0ix is working fine on hatch. And also make sure that DEVSLP is pulled high in S3. Change-Id: Ifb6a71a72244522c8dd8d48e9b9f8dc6feef8981 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-04mb/google/hatch: Create kohaku variantShelley Chen
Creating Kohaku hatch variant. Currently taking a copy of the hatch variant. Kohaku-specific changes to come in future CLs. BUG=b:129706980 BRANCH=NONE TEST=NONE Change-Id: Ib4b8c2c8332910d992549e3aae8e6aff5234698b Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32160 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-03mb/google/hatch: Enable Goodix Touch ScreenEric Lai
Enable Goodix touch screen. Follow GT7375P_Datasheet_Rev.0.1 BUG=b:124460799 BRANCH=None TEST=local build and tested with Goodix touch screen Change-Id: Ib204e6b77b87ba6c775cf38e572476dd9eb37d1d Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32134 Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-02mb/google/hatch: Change GPIO_E1 settingJohn Su
For HW require to change GPIO_E1. Change GOIO_E1 setting from NF2(SATAGP1) to NF1(SATAPCIE1). BUG=b:123730924 TEST=flash BIOS and make sure hatch boots up properly Change-Id: I0f5569e13b17a2dc713be5031a63436e8f31f911 Signed-off-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32099 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-02mb/google/hatch: Re-configure GPP_A12 as GPO before entering sleepKrishna Prasad Bhat
GPP_A12 has a Native3 (SX_EXIT_HOLDOFF#) mode, which allows to delay resuming to S0. If this pad is not locked and platform was not initially designed for this functionality, malware could reconfigure this pads setting under OS (switch to Native3), which would make platform not able to resume until G3 is applied. To prevent misuse of this pad, re-configure this pad before entering S3 and S5 to guarantee that the pad configuration is correct. BUG=b:128686027 Change-Id: I1e7979baa491acf2c56d223afb4618f0f6429e37 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32111 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-04-01mb/google/hatch: Unlock GPIO padsKrishna Prasad Bhat
GPP_A12 is being used as FPMCU_RST in hatch. This GPIO is being padlocked in FSP and cannot used in kernel. Hence unlock the GPIO pads to export this pin in kernel to be used as FPMCU_RST. BUG=b:128686027 BRANCH=None TEST=Read Pad Configuration Lock (PADCFGLOCK_GPP_A_0) register. localhost /sys/class/gpio # iotools mmio_read32 0xfd6e0080 0x00000000 localhost /sys/class/gpio # echo 212 > export Change-Id: Ie0439956e6c8e386435e535665ccaf2ab82adeb0 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32126 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-29mb/google/hatch: Deassert EN_PP3300_WWAN during sleepMaulik V Vaghela
Deassert EN_PP3300_WWAN to turn the WWAN module completely off when entering S5. This is the same fix in commit eeb475c5c for coral board. BUG=none BRANCH=none TEST=On hatch, Perform a quick system power cycle, verify that the modem is powered cycle and the SIM with PIN lock enabled requests unlocking. Change-Id: I3ec8ccb7618189b9e8586f5571a68d3309597ee7 Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32051 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28mb/google/hatch/variants: Add DPTF based Fan controlSumeet Pawnikar
This adds DPTF based Fan speed control for CML based Hatch system. BUG=None BRANCH=None TEST=Built and tested fan speed with different temperatures Change-Id: I3c2a679dc67eecb17098ce0f0c9703c679473a2d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31980 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-28mb/google/hatch: Initialize FPMCU_PCH_BOOT1Shelley Chen
In the latest hatch schematics, BOOT1 for the FP MCU is now connected to the AP. Configuring it to be the same as BOOT0. BUG=b:126455006 BRANCH=None TEST=./util/abuild/abuild -p none -t google/hatch -x -a -c max Change-Id: Ibb451983674a7d812dc562cb8addb1dc50fb155c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-27mb/mainboard/google/hatch/variants: Set tcc_offset valueSumeet Pawnikar
Set tcc_offset value to 10C. It configures the Thermal Control Circuit (TCC) activation value to 90C. This prevents any abrupt thermal shutdown by taking early thermal throttling action when CPU temperature goes above 90C. Change-Id: Ifee0fcc326530622b04e60af0f3b9cb9e3aea7ea Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31984 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-27mb/google/hatch: Add GPIO_A8 for Pen detect functionDtrain Hsu
Add GPIO_A8 for pen detect function. BUG=b:122765828 TEST=flash BIOS and using switch to verify GPIO_A8 value change. Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: Ie7c888ea61dd61e60c1d184565bd95e6b03777be Reviewed-on: https://review.coreboot.org/c/coreboot/+/31815 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Enable FP MCUShelley Chen
AP communicates with FP MCU through gspi1. BUG=b:126455006 BRANCH=None TEST=ensure during bootup we see spi id spi-PRP0001:01 in dmesg FP MCU fw is not ready yet, so not much testing to be done yet. Signed-off-by: Shelley Chen <shchen@google.com> Change-Id: I2eba205d5e63664dca684fbd849454c5a2fe0d0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/32017 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Add overridetree to hatch variantShelley Chen
Add serialio settings to hatch. Only applies to CML. BUG=b:128347800 BRANCH=None TEST=abuild Change-Id: I6a9ec778d74cd48a2e1c79f8e669a9a6a6a9477d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32003 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-22mb/google/hatch: Add SX9310 SAR0 sensorEvan Green
Add SAR0, which is an SX9310. The schematics and layout have a second SAR1 sensor provisioned on I2C4, with an interrupt of GPP_A6, but this is not populated. Signed-off-by: Evan Green <evgreen@chromium.org> BUG=b:128540461 BRANCH=none TEST=Boot kernel with sx9310 driver, see it come up happily Change-Id: I63943cc7da5ff56f6ef6dcbd99bb8f8f031e8bf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-22mb/google/hatch: Enable HUNG_TASK wake interruptEvan Green
Enable the HUNG_TASK as a wakeup host event, as it's used by S0ix failure detection to wake the system back up if a suspend to S0ix never asserted S0_SLP#. BUG=b:123716513 BRANCH=None TEST=Test S0ix on Hatch with appropriate EC and kernel changes. Signed-off-by: Evan Green <evgreen@chromium.org> Change-Id: I447211892df210af97e8df0380bab032b14cbee8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/32004 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-21soc/intel/cannonlake: Assign FSP UPDs for HPD and Data/CLK of DDI portsKrishna Prasad Bhat
Assign the FSP UPDs for HPD and DDC of DDI ports. FSP assumes that all DDI ports are enabled and hence configures the HPD and CLK for DDI ports. This patch initializes only the required UPDs to enable display ports. BUG=b:123907904 TEST=DP devices working correctly. Change-Id: Ic0c172cd3d087fc8f49b01ab23feffdababf7166 Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31520 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-15mb/google/hatch: Enable TBMC deviceDtrain Hsu
This change enables tablet mode ACPI device for all hatch boards. BUG=b:125355874 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Change-Id: I4d3818497172828d750b34fe91cbb6cc65e69fc5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/hatch: Define GPP_C13 as EC_SYNC_IRQPhilip Chen
BUG=b:125933998 CQ-DEPEND=CL:1510513 BRANCH=None TEST=manually verify on hatch, chromeos-ec interrupt count increases Signed-off-by: Philip Chen <philipchen@google.com> Change-Id: I1dd38ca5aed1e0ddecb4738910cbfa92de33d315 Reviewed-on: https://review.coreboot.org/c/coreboot/+/31814 Reviewed-by: Enrico Granata <egranata@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: fix RCompResistor[0] valueShelley Chen
From doc#573387 CML System Memory DQ DQS Rcomp Mapping Information User Guide, RCompResistor[0] should be 121. BUG=b:122959294 BRANCH=None TEST=emerge coreboot and make sure boots up Change-Id: If69e7fb41e79d88d21b0e50fb65107a1686d696a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31868 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-14mb/google/hatch: Update DRAM IDsShelley Chen
Update Hatch DRAM IDs to use the new DRAM ID assignment for general spds: 0 = 4G 2400 1 = 4G 2666 2 = 8G 2400 3 = 8G 2666 4 = 16G 2400 5 = 16G 2666 BUG=b:122959294 BRANCH=None TEST=emerge coreboot and make sure boots up Change-Id: Ic47737ce37597318bb794b63a47ced2467d8bbb0 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-14mb/google/hatch: Use MEM_CH_SEL to indicate single_channel skuShelley Chen
MEM_CH_SEL is used to indicate whether we are on a single or dual channel device, where MEM_CH_SEL = 1 for single channel skus and MEM_CH_SEL = 0 for dual channel skus. Initialize single_channel field (from GPP_F2), which will in turn initialize MemorySpdPtr pointers in cannonlake soc code. In the first build, we did not use GPP_F2, so we need to add an internal pulldown as those early devices were all dual channel devices. BUG=b:123062346, b:122959294 BRANCH=None TEST=Boot into current boards and ensure that we have 2 channels as expected Also, verify that GPP_F2 is set to 0. Change-Id: I89d022793580be603a93d0b177d73ce968529b5c Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31358 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-11mb/google/hatch: Enable audio supportSathya Prakash M R
Following changes are done to enable audio support on hatch 1. Enable I2C4 device at 400Khz at 1.8V 2. Configure GPIO for HP INT and SPKR_PA_EN 3. Add ACPI entry for RT5682 and MAX98357A 4. Enable I2S0 and I2S1 lines 5. Enable generic max98357a driver in Kconfig BUG=b:123738217 BRANCH=none TEST=Check SSDT table for RT5682 & MAX98357a entry. Verify audio using Sound Open firmware (SOF) Change-Id: I93f3917c19cc3f0f8fd7b5e1b4d9b24a59f45f84 Signed-off-by: Sathya Prakash M R <sathya.prakash.m.r@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31280 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08mb/google/hatch: Create hatch_whl variantShelley Chen
In preparation for the transition of hatch from WHL to CML, we are creating a checkpoint called hatch_whl that we can use for creating firmware compatible with the WHL hatch variant. BUG=b:127310803 BRANCH=NONE TEST=NONE Change-Id: Iecae584ee6feefcf29955a4720e9c24bdc8abe6d Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-03-08mb/google/hatch: Initialize all gpiosShelley Chen
BUG=b:123490912 BRANCH=None TEST=flash BIOS and make sure hatch boots up properly Change-Id: I9e41f0b38703f2c7a2b5a7ac9b108f8f10070004 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31724 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-28mb/google/hatch: Add GPIO programming for GPP_C0 to GPP_C7Maulik V Vaghela
coreboot did not program all GPIOs from C0 to C7 correctly which are SMBUS GPIO. Some of the GPIOs are left in default mode which is native function but we need to configure as GPIO mode and provide proper configuration as per schematic. After fixing GPIO, CSME power gating issue also gets fixed since SMBUS was not getting idle due to GPIO configuration and CSME was not getting power gated due to SMBUS. BUG=b:123702553 BRANCH=none TEST=Check on hatch board. CSME was not getting power gated for s0ix. After applying this patch CSME is power gated now Change-Id: I5c6b9310dcc7bade0023abd5524781ce71df28be Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/31640 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/hatch: Initialize GPIO_PCH_WP early in bootRizwan Qureshi
Initialize GPIO_PCH_WP early in boot. Update cros_gpios[] array with GPIO_PCH_WP information. Also, Configure recovery mode GPIO as virtual since hatch does not have one. BUG=b:125943273 Change-Id: I0b7e6dbf9229941aca4952965fb54f07457dccae Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31599 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-27mb/google/hatch: update SD card detect GPIORizwan Qureshi
SD_CD# in Cannonlake PCH is also wired to an internal virtual GPIO, expose that GPIO for kernel to configure card detect IRQ. BUG=b:123350329 Change-Id: I566cc2eb11dc257366897a1efba905b8ddcf493d Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Reviewed-on: https://review.coreboot.org/c/31553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-22mb/google/hatch: Enable wake from trackpadShelley Chen
For some reason, wake does not currently work from GPP_D21, but IRQs are working fine from that gpio. Thus, we have to switch IRQ to GPP_D21 and wake to GPP_A21, which was previously used for IRQs from the trackpad. Additionally, we need to use two gpios for irqs and wake source at the moment because of b:123967687, where FSP is locking down PCR and configuring ITSS. We need to configure the wake source gpio as inverted and the IRQ gpio as non-inverted until the bug is resolved. BUG=b:121212459 BRANCH=None TEST=run evtest with trackpad Use trackpad with ChromeOS UI and make sure it reacts as expected. Run powerd_dbus_suspend and press trackpad and make sure DUT wakes. Change-Id: I7b236136befc05c6586d9ba69185ed4b5d385273 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/31533 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-15mb/google/hatch: Enable DPTF functionalitySumeet Pawnikar
Enable DPTF functionality on hatch platform. Change-Id: If9ef74364616f95b27b73c39fea42d2623d78ae2 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/31276 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-13mb/google/hatch: Configure GPIO pad for non-inversionAamir Bohra
This implementation configures GPIO (GPP_A21, GPP_C21, GPP_D16) pad in non-inversion mode i.e Rx PAD state is not inverted as it is sent from GPIO to IOAPIC. BUG=b:123315212 TEST=Tested for below: -> Verify touchpad is working fine. -> TPM init is successful and boot with fixed boot media. Change-Id: I6034fd07ccc96a19218d57ef8bb9049c4b963ea5 Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Reviewed-on: https://review.coreboot.org/c/31328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 05:06:12 +0000