Age | Commit message (Expand) | Author |
2024-02-13 | mb/google/*: Replace use of gfx/generic addr field with display type | Matt DeVillier |
2024-02-13 | mb/google/hatch/var/jinlon: Ensure LCD backlight controls generated | Matt DeVillier |
2024-02-13 | mb/google/hatch/var/jinlon: Use name 'LCD0' for internal panel output | Matt DeVillier |
2024-01-24 | mb/google/gale to nyan_blaze: Rename Makefiles from .inc to .mk | Martin Roth |
2023-12-19 | mb/google/hatch/var/jinlon: Increase reset deassert delay to 4 ms | Eran Mitrani |
2023-10-31 | mb/google/hatch/var/*: Mark fingerprint reader as hidden | Matt DeVillier |
2023-10-27 | mb/google/hatch/var/*: Disable unused device in SerialIO cfg | Matt DeVillier |
2023-10-27 | mb/google/hatch/var/jinlon: Use chipset devicetree references | Matt DeVillier |
2023-10-24 | mb/google/hatch: Default native SD card interface to off in baseboard | Matt DeVillier |
2023-10-24 | mb/google/hatch: Default I2C3 (proximity sensor) to off in baseboard | Matt DeVillier |
2023-10-24 | mb/google/hatch: Default I2C2 (digitizer) to off in baseboard | Matt DeVillier |
2023-05-22 | mb/google/hatch/jinlon: Add HID to gfx ACPI node | Kornel Dulęba |
2023-05-03 | mb/google/hatch: Add SOF chip driver | Matt DeVillier |
2023-01-15 | drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flag | Matt DeVillier |
2023-01-13 | mainboard: Remove duplicated <soc/gpio.h> | Elyes Haouas |
2022-12-23 | mb/google/hatch: Use runtime detection for touchscreens/digitizers | Matt DeVillier |
2022-12-23 | mb/google/hatch: Set touchpad/screen IRQs to LEVEL vs EDGE | Matt DeVillier |
2022-12-23 | mb/google/hatch: Implement touchscreen power sequencing | Matt DeVillier |
2022-09-09 | mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flag | Matt DeVillier |
2022-03-07 | mb/google/hatch/var/jinlon: Fix EPS detection and disablement | Matt DeVillier |
2021-11-17 | mb/google/hatch: Add VBTs for variants | Matt DeVillier |
2021-11-15 | Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main" | Hsuan-ting Chen |
2021-09-21 | mb/google/hatch/var/jinlon: Switch to using device pointers | Furquan Shaikh |
2021-01-21 | mb/google/hatch: do UART pad configuration at board-level | Michael Niewöhner |
2021-01-04 | mb/google/hatch (baseboard): add ACPI backlight support | Matt DeVillier |
2020-11-17 | src: Add missing 'include <console/console.h>' | Elyes HAOUAS |
2020-11-13 | mb/google/hatch: Configure IRQs as level triggered for HID over I2C | Karthikeyan Ramasubramanian |
2020-11-09 | mb/google/hatch/jinlon: Describe the privacy_gpio | Ricardo Ribalda |
2020-07-26 | src: Remove extra lines in license header | Elyes HAOUAS |
2020-07-14 | mb/google/hatch: Set SA slow slew rate to 1/2 for jinlon/dratini | Wisley Chen |
2020-06-02 | src: Remove unused 'include <bootstate.h>' | Elyes HAOUAS |
2020-05-26 | cannonlake: update processor power limits configuration | Sumeet R Pawnikar |
2020-05-18 | src: Remove leading blank lines from SPDX header | Elyes HAOUAS |
2020-05-11 | treewide: Remove "this file is part of" lines | Patrick Georgi |
2020-05-09 | src/: Replace GPL boilerplate with SPDX headers | Patrick Georgi |
2020-05-02 | acpi: Move ACPI table support out of arch/x86 (3/5) | Furquan Shaikh |
2020-04-27 | mb/google/hatch/var/jinlon: Update DPTF parameters | Wisley Chen |
2020-04-25 | mb/google/hatch/var/jinlon: Tune i2c frequency under 400 KHz | Wisley Chen |
2020-04-06 | mb/google/hatch: Use SPDX for GPL-2.0-only files | Angel Pons |
2020-03-20 | drivers/generic/max98357a: Allow custom _HID from config | Aamir Bohra |
2020-03-18 | mainboard/google: Remove copyright notices | Patrick Georgi |
2020-03-02 | mb/google/hatch/var/jinlon: Disable EPS on some SKUs | Rajat Jain |
2020-03-02 | mb/google/hatch/var/jinlon: Enable gfx/generic driver | Rajat Jain |
2020-02-27 | mb/google/hatch/var/jinlon: Configure GPP_E0 as output | Rajat Jain |
2020-02-06 | mb/google/hatch: Add noise mitigation setting for dratini/jinlon | Wisley Chen |
2020-01-21 | mb/google/hatch/var/jinlon: Remove DPTF fan control | Wisley Chen |
2019-12-26 | hatch: Fix FPMCU pwr/rst gpio handling for dratini/jinlon | Wisley Chen |
2019-12-26 | mb/google/hatch/var/jinlon: Update DPTF parameters | Wisley Chen |
2019-12-25 | mainboard/google/hatch: Move gpio GPP_H3 config up from baseboard | Edward O'Callaghan |
2019-12-25 | mainboard/google/hatch: Move gpio GPP_C* NC down into baseboard | Edward O'Callaghan |
2019-12-25 | mainboard/google/hatch: Move gpio GPP_A* NC down into baseboard | Edward O'Callaghan |
2019-12-24 | mainboard/google/hatch: Remove MAX98357A assumption from baseboard | Edward O'Callaghan |
2019-12-20 | mb/google/hatch/var/jinlon: Config WWAN_RESET | Wisley Chen |
2019-11-20 | /mb/google/hatch: Create jinlon variant | Wisley Chen |