summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants/helios
AgeCommit message (Expand)Author
2023-10-31mb/google/hatch/var/*: Mark fingerprint reader as hiddenMatt DeVillier
2023-10-27mb/google/hatch/var/*: Disable unused device in SerialIO cfgMatt DeVillier
2023-10-26mb/google/hatch/var/helios: Use chipset devicetree referencesMatt DeVillier
2023-10-24mb/google/hatch: Default native SD card interface to off in baseboardMatt DeVillier
2023-10-24mb/google/hatch: Default I2C3 (proximity sensor) to off in baseboardMatt DeVillier
2023-10-24mb/google/hatch: Default I2C2 (digitizer) to off in baseboardMatt DeVillier
2023-05-03mb/google/hatch: Add SOF chip driverMatt DeVillier
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
2022-12-23mb/google/hatch: Use runtime detection for touchscreens/digitizersMatt DeVillier
2022-12-23mb/google/hatch: Set touchpad/screen IRQs to LEVEL vs EDGEMatt DeVillier
2022-12-23mb/google/hatch: Implement touchscreen power sequencingMatt DeVillier
2021-11-17mb/google/hatch: Add VBTs for variantsMatt DeVillier
2021-11-15Reland "vboot_logic: Set VB2_CONTEXT_EC_TRUSTED in verstage_main"Hsuan-ting Chen
2021-01-21mb/google/hatch: do UART pad configuration at board-levelMichael Niewöhner
2021-01-04mb/google/hatch (baseboard): add ACPI backlight supportMatt DeVillier
2020-08-04mb/**/{devicetree,overridetree}.cb: Indent with tabsAngel Pons
2020-06-28gpio_keys: Allow boards to configure different wakeup routesFurquan Shaikh
2020-05-26cannonlake: update processor power limits configurationSumeet R Pawnikar
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
2020-05-01Helios: Update DPTF settings for smooth fan speed controlSumeet R Pawnikar
2020-04-06mb/google/hatch: Use SPDX for GPL-2.0-only filesAngel Pons
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
2020-01-16/mb/google/hatch/variants/helios: Remove MAX98357A devicetree entryKrishna Prasad Bhat
2020-01-10mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
2019-12-25mainboard/google/hatch: Move gpio GPP_C* NC down into baseboardEdward O'Callaghan
2019-12-25mainboard/google/hatch: Move gpio GPP_A* NC down into baseboardEdward O'Callaghan
2019-12-24mainboard/google/hatch: Remove MAX98357A assumption from baseboardEdward O'Callaghan
2019-12-05hatch: Fix FPMCU pwr/rst gpio handlingCraig Hesling
2019-12-02mb/google/hatch/variants/helios: DPTF solution updateKane Chen
2019-11-13mb/google/hatch/variants/helios: Fix leakage voltage problem on touchscreenKane Chen
2019-11-11Helios: Set the reset delay for Goodix touchscreen to 120msShelley Chen
2019-11-07mb/google/hatch/variants/helios: Modify touchscreen power on sequenceKane Chen
2019-11-05mb/google/hatch/variants/helios: Update TSR3 sensor thresholdsSumeet Pawnikar
2019-10-30mb/google/hatch/variants/helios: Modify DPTF parametersKane Chen
2019-10-25mb/google/hatch: Set DSM parameters for HeliosCheng-Yi Chiang
2019-10-25mb/google/hatch: Fix speaker mapping for HeliosCheng-Yi Chiang
2019-10-15helios: Add TEMP_SENSOR4 to DPTFPaul Fagerburg
2019-10-09mb/google/hatch: Set FPS as wake sourceShelley Chen
2019-09-18mb/google/hatch/variants/helios: Add DPTF control for ambient sensorSumeet Pawnikar
2019-09-18mb/google/hatch/variants/helios: Update DPTF parametersSumeet Pawnikar
2019-09-13mb/google/hatch/var: Increase Goodix touchscreen reset delay to 500msPhilip Chen
2019-09-10mb/google/hatch/variants/helios: Modify FPU power on sequenceFrank_Chu
2019-09-06mb/google/hatch/variants/helios: Update DPTF parameters and TDP PL1/PL2Frank_Chu
2019-09-02mb/google/hatch/var/helios: Increase touchscreen reset delay to 120msPhilip Chen
2019-08-09mb/google/hatch: Refactor override_early_gpio_tableTim Wawrzynczak
2019-08-05mb/google/helios: Set SPKR_PA_EN PIN high for boot beepSubrata Banik
2019-08-03mb/google/hatch/variants/helios: Adjust all I2C CLK and I2C0 SDA hold timeFrank_Chu
2019-07-26mb/google/hatch/helios: Update GPIO and device treeTim Wawrzynczak
2019-07-23mb/google/hatch: Add FP MCU to helios device treePhilip Chen
2019-07-19mb/google/helios: Add ALC1011 in device tree to enable speaker ampsSathya Prakash M R
2019-07-18mb/google/hatch/var/helios: Implement variant_memory_sku()Furquan Shaikh
2019-07-13mb/google/hatch: Fix trackpad configuration in overridetreeFurquan Shaikh
2019-07-11mb/google/hatch/variants: Fix nonworking touch padFrank_Chu
2019-06-16mb/google/hatch: Move memory strap GPIOs under variant gpio headerAamir Bohra
2019-06-15mainboard/google/hatch: Scrub Helios GPIOsTim Wawrzynczak
2019-06-14mainboard/google/hatch: Update Helios device treeTim Wawrzynczak
2019-06-13mb/google/hatch/variants/helios: Use LPDDR3 memoryPaul Fagerburg
2019-05-31mb/google/hatch: Create helios variantTim Wawrzynczak