Age | Commit message (Expand) | Author |
2019-05-13 | mainboard: remove "recovery" gpio, selectively add "presence" gpio. | Matt Delco |
2019-04-23 | src: Use include <console/console.h> when appropriate | Elyes HAOUAS |
2019-04-11 | chromeos: clean up "recovery" and "write protect" GPIOs | Joel Kitching |
2019-04-01 | assert: Make dead_code() work at link-time instead of compile-time | Julius Werner |
2019-03-08 | coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX) | Julius Werner |
2019-03-05 | mainboard: Enable PRESERVE flag in all vboot/chromeos FMD files | Hung-Te Lin |
2019-03-04 | device/mmio.h: Add include file for MMIO ops | Kyösti Mälkki |
2019-03-04 | arch/io.h: Drop unnecessary include | Kyösti Mälkki |
2019-02-22 | symbols.h: Add macro to define memlayout region symbols | Julius Werner |
2018-11-21 | (console,drivers/uart)/Kconfig: Fix dependencies | Nico Huber |
2018-11-16 | mb/*/*/Kconfig: Don't specify devicetree path if default val used | Peter Lemenkov |
2018-10-23 | src: Remove unneeded whitespace | Elyes HAOUAS |
2018-10-22 | soc/rockchip/rk3399: Convert to `board_reset()` | Nico Huber |
2018-08-17 | arm64: Factor out common parts of romstage execution flow | Julius Werner |
2018-06-04 | security/tpm: Unify the coreboot TPM software stack | Philipp Deppenwiese |
2018-05-22 | rk3399: Enable bootblock compression | Julius Werner |
2018-05-08 | mb/google: Get rid of device_t | Elyes HAOUAS |
2018-05-04 | mainboard/google: Comment variant names in Kconfig | Martin Roth |
2018-04-17 | cbfs: Add cbfs_boot_load_file() | T Michael Turney |
2018-03-08 | google/scarlet: Adjust K&D power sequence from software | Brian Norris |
2018-02-16 | google/gru: Fix GPIO_WP pull and polarity for Scarlet | Julius Werner |
2018-02-06 | google/gru: Add another 512KB to the COREBOOT FMAP region | Julius Werner |
2018-02-02 | google/gru: Use newer version of Innolux P097PFG panel init code | Lin Huang |
2018-01-29 | google/scarlet: Add initialization sequence for Innolux P097PFG panel | Lin Huang |
2018-01-29 | rockchip/rk3399: Support LONG_WRITE type in MIPI DSI | Lin Huang |
2018-01-18 | security/tpm: Change TPM naming for different layers. | Philipp Deppenwiese |
2018-01-18 | security/tpm: Move tpm TSS and TSPI layer to security section | Philipp Deppenwiese |
2018-01-08 | google/gru: switch to spi2 for all scarlet based boards | Ege Mihmanli |
2017-12-20 | google/gru: Adjust to incorrect strapping resistors on Kevin | Julius Werner |
2017-12-20 | google/gru: Prettify strapping ID ADC table | Julius Werner |
2017-12-12 | google/scarlet: support INNOLUX P097PFG panel | Lin Huang |
2017-12-11 | google/gru: Stop mucking with unused I2S0 pins in codec config | Julius Werner |
2017-12-11 | google/gru: Change Scarlet SKU ID pins to pull-ups | Julius Werner |
2017-12-07 | google/scarlet: update Kingdisplay kd097d04 timing | Lin Huang |
2017-12-07 | google/gru: Add SKU ID for Scarlet | Julius Werner |
2017-12-07 | boardid: Switch from Kconfig to weak functions | Julius Werner |
2017-12-07 | boardid: Minor clean up and standardization | Julius Werner |
2017-12-05 | google/gru: update RAMID table | Lin Huang |
2017-11-28 | google/scarlet: support kd097d04 panel | Lin Huang |
2017-11-28 | google/gru: correct backlight gpio | Lin Huang |
2017-11-28 | rockchip/rk3399: support dual mipi dsi | Lin Huang |
2017-11-22 | google/gru: Add support for rainier | Ege Mihmanli |
2017-11-20 | google/gru: Add config for scarlet-derived boards | Ege Mihmanli |
2017-11-17 | mb/google: Add Chromebook marketing names | Jonathan Neuschäfer |
2017-11-06 | gru: Fix and export SPK_PA_EN GPIO for Scarlet | Julius Werner |
2017-10-02 | google/gru: Fix pmu1833_volsel handling | Julius Werner |
2017-09-06 | google/gru: Re-enable 3V rail GPIO on Scarlet | Julius Werner |
2017-08-31 | google/gru: Support Nefario rev0 | Philip Chen |
2017-08-18 | include/device: Split i2c.h into three | Nico Huber |
2017-08-06 | rockchip: gpio: add gpio_pull argument in gpio_input_irq() function | Lin Huang |
2017-08-01 | google/gru: Correct Scarlet pwm regulator minimum value and maximum value | Lin Huang |
2017-08-01 | google/gru: Correct the Sdcard control gpio setting for Scarlet | Lin Huang |
2017-08-01 | google/gru: Use 1.8V powerdomain for gpio4cd on Scarlet | Lin Huang |
2017-07-19 | google/gru: Add support for Scarlet rev1 | Julius Werner |
2017-07-19 | rockchip/rk3399: Adjust gpio_t format to match ARM TF | Julius Werner |
2017-07-12 | google/gru: Add Nefario | Philip Chen |
2017-06-19 | rockchip/rk3399: fix DRAM gate training issue | Lin Huang |
2017-06-15 | google/gru: drive the stronger pull-up for touchpad | Caesar Wang |
2017-06-13 | Consolidate reset API, add generic reset_prepare mechanism | Julius Werner |
2017-06-08 | device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INIT | Nico Huber |
2017-05-18 | google/scarlet: Enable innolux,p079zca MIPI panel | Nickey Yang |
2017-05-11 | google/gru: support 800M/928M frequency for bob | Caesar Wang |
2017-05-11 | rockchip/rk3399: enable DPLL SSC for DDR EMI test on bob | Caesar Wang |
2017-05-05 | Revert "google/scarlet: Enable innolux,p079zca MIPI panel" | Martin Roth |
2017-05-05 | google/scarlet: Enable innolux,p079zca MIPI panel | Nickey Yang |
2017-05-03 | google/gru: skip usbphy1 setup for Scarlet | philipchen |
2017-04-28 | google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irq | Jeffy Chen |
2017-04-25 | google/gru: change the sd power sequence | Caesar Wang |
2017-04-24 | Kconfig: provide MAINBOARD_HAS_TPM_CR50 option | Aaron Durbin |
2017-04-19 | google/gru: change kevin boot-time center logic voltage to 925mV | Douglas Anderson |
2017-04-19 | google/gru: change center logic voltage to 900mV | Derek Basehore |
2017-04-11 | scarlet/gru: skip display because mipi driver not ready | Shunqian Zheng |
2017-04-06 | gru: Initialize I2C bus for ARC2C0608 | Philip Chen |
2017-03-28 | vboot: Move remaining features out of vendorcode/google/chromeos | Julius Werner |
2017-03-28 | vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by default | Julius Werner |
2017-03-09 | drivers/spi/tpm: provide Kconfig to indicate CR50 usage | Aaron Durbin |
2017-03-07 | google/gru: add MAX_SDRAM_FREQ config to choose max ddr freq | Shunqian Zheng |
2017-02-23 | google/gru: whitespace fix | Patrick Georgi |
2017-02-23 | google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection threshold | William wu |
2017-02-23 | google/gru: update the pwm regulator | Caesar Wang |
2017-02-23 | google/gru: improve eye diagram for passing the test | Caesar Wang |
2017-02-22 | google/gru: Fix whitespace | Patrick Georgi |
2017-02-11 | google/gru: add scarlet variant | philipchen |
2017-01-22 | gru: kevin: define GPIOs used on both platforms | Vadim Bendebury |
2017-01-13 | gru: Tuning USB 2.0 PHY0 and PHY1 host-port | William wu |
2016-12-06 | Bob: Update the memory ramid of bob | Shasha Zhao |
2016-12-06 | Bob: add bob in coreboot | Shasha Zhao |
2016-12-06 | rockchip/rk3399: sdram: use register to calculate sdram sizes | Lin Huang |
2016-12-06 | google/gru: Power-cycle USB ports in developer/recovery modes | Julius Werner |
2016-12-01 | lib: put romstage_handoff implementation in own compilation unit | Aaron Durbin |
2016-11-29 | google/gru: Tune USB 2.0 PHY to increase compatibility | William wu |
2016-11-18 | google/chromeec: Add common infrastructure for boot-mode switches | Furquan Shaikh |
2016-11-17 | google/gru: Move to one CA training pattern | Derek Basehore |
2016-11-17 | google/gru: Add new CA training pattern | Derek Basehore |
2016-11-02 | rockchip/rk3399: display: Do not allocate framebuffer in coreboot | Lin Huang |
2016-11-02 | rockchip/rk3399: sdram: also prepare the index1 configuration | Lin Huang |
2016-10-25 | rockchip/rk3399: gru/kevin: drop unused sdram configs | Lin Huang |
2016-10-25 | rockchip/rk3399: reset system if DDR init fails | Lin Huang |
2016-10-08 | google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1 | William wu |
2016-10-07 | google/gru: drive WLAN_MODULE_RST# low as early as possible | Brian Norris |