summaryrefslogtreecommitdiff
path: root/src/mainboard/google/gru
AgeCommit message (Expand)Author
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
2019-02-22symbols.h: Add macro to define memlayout region symbolsJulius Werner
2018-11-21(console,drivers/uart)/Kconfig: Fix dependenciesNico Huber
2018-11-16mb/*/*/Kconfig: Don't specify devicetree path if default val usedPeter Lemenkov
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
2018-10-22soc/rockchip/rk3399: Convert to `board_reset()`Nico Huber
2018-08-17arm64: Factor out common parts of romstage execution flowJulius Werner
2018-06-04security/tpm: Unify the coreboot TPM software stackPhilipp Deppenwiese
2018-05-22rk3399: Enable bootblock compressionJulius Werner
2018-05-08mb/google: Get rid of device_tElyes HAOUAS
2018-05-04mainboard/google: Comment variant names in KconfigMartin Roth
2018-04-17cbfs: Add cbfs_boot_load_file()T Michael Turney
2018-03-08google/scarlet: Adjust K&D power sequence from softwareBrian Norris
2018-02-16google/gru: Fix GPIO_WP pull and polarity for ScarletJulius Werner
2018-02-06google/gru: Add another 512KB to the COREBOOT FMAP regionJulius Werner
2018-02-02google/gru: Use newer version of Innolux P097PFG panel init codeLin Huang
2018-01-29google/scarlet: Add initialization sequence for Innolux P097PFG panelLin Huang
2018-01-29rockchip/rk3399: Support LONG_WRITE type in MIPI DSILin Huang
2018-01-18security/tpm: Change TPM naming for different layers.Philipp Deppenwiese
2018-01-18security/tpm: Move tpm TSS and TSPI layer to security sectionPhilipp Deppenwiese
2018-01-08google/gru: switch to spi2 for all scarlet based boardsEge Mihmanli
2017-12-20google/gru: Adjust to incorrect strapping resistors on KevinJulius Werner
2017-12-20google/gru: Prettify strapping ID ADC tableJulius Werner
2017-12-12google/scarlet: support INNOLUX P097PFG panelLin Huang
2017-12-11google/gru: Stop mucking with unused I2S0 pins in codec configJulius Werner
2017-12-11google/gru: Change Scarlet SKU ID pins to pull-upsJulius Werner
2017-12-07google/scarlet: update Kingdisplay kd097d04 timingLin Huang
2017-12-07google/gru: Add SKU ID for ScarletJulius Werner
2017-12-07boardid: Switch from Kconfig to weak functionsJulius Werner
2017-12-07boardid: Minor clean up and standardizationJulius Werner
2017-12-05google/gru: update RAMID tableLin Huang
2017-11-28google/scarlet: support kd097d04 panelLin Huang
2017-11-28google/gru: correct backlight gpioLin Huang
2017-11-28rockchip/rk3399: support dual mipi dsiLin Huang
2017-11-22google/gru: Add support for rainierEge Mihmanli
2017-11-20google/gru: Add config for scarlet-derived boardsEge Mihmanli
2017-11-17mb/google: Add Chromebook marketing namesJonathan Neuschäfer
2017-11-06gru: Fix and export SPK_PA_EN GPIO for ScarletJulius Werner
2017-10-02google/gru: Fix pmu1833_volsel handlingJulius Werner
2017-09-06google/gru: Re-enable 3V rail GPIO on ScarletJulius Werner
2017-08-31google/gru: Support Nefario rev0Philip Chen
2017-08-18include/device: Split i2c.h into threeNico Huber
2017-08-06rockchip: gpio: add gpio_pull argument in gpio_input_irq() functionLin Huang
2017-08-01google/gru: Correct Scarlet pwm regulator minimum value and maximum valueLin Huang
2017-08-01google/gru: Correct the Sdcard control gpio setting for ScarletLin Huang
2017-08-01google/gru: Use 1.8V powerdomain for gpio4cd on ScarletLin Huang
2017-07-19google/gru: Add support for Scarlet rev1Julius Werner
2017-07-19rockchip/rk3399: Adjust gpio_t format to match ARM TFJulius Werner
2017-07-12google/gru: Add NefarioPhilip Chen
2017-06-19rockchip/rk3399: fix DRAM gate training issueLin Huang
2017-06-15google/gru: drive the stronger pull-up for touchpadCaesar Wang
2017-06-13Consolidate reset API, add generic reset_prepare mechanismJulius Werner
2017-06-08device/Kconfig: Introduce MAINBOARD_FORCE_NATIVE_VGA_INITNico Huber
2017-05-18google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-11google/gru: support 800M/928M frequency for bobCaesar Wang
2017-05-11rockchip/rk3399: enable DPLL SSC for DDR EMI test on bobCaesar Wang
2017-05-05Revert "google/scarlet: Enable innolux,p079zca MIPI panel"Martin Roth
2017-05-05google/scarlet: Enable innolux,p079zca MIPI panelNickey Yang
2017-05-03google/gru: skip usbphy1 setup for Scarletphilipchen
2017-04-28google/gru: tpm on bob: cr50: add irq clear/irq status for tpm irqJeffy Chen
2017-04-25google/gru: change the sd power sequenceCaesar Wang
2017-04-24Kconfig: provide MAINBOARD_HAS_TPM_CR50 optionAaron Durbin
2017-04-19google/gru: change kevin boot-time center logic voltage to 925mVDouglas Anderson
2017-04-19google/gru: change center logic voltage to 900mVDerek Basehore
2017-04-11scarlet/gru: skip display because mipi driver not readyShunqian Zheng
2017-04-06gru: Initialize I2C bus for ARC2C0608Philip Chen
2017-03-28vboot: Move remaining features out of vendorcode/google/chromeosJulius Werner
2017-03-28vboot: Assume EC_SOFTWARE_SYNC and VIRTUAL_DEV_SWITCH by defaultJulius Werner
2017-03-09drivers/spi/tpm: provide Kconfig to indicate CR50 usageAaron Durbin
2017-03-07google/gru: add MAX_SDRAM_FREQ config to choose max ddr freqShunqian Zheng
2017-02-23google/gru: whitespace fixPatrick Georgi
2017-02-23google/gru: Tuning USB 2.0 PHY0 and PHY1 squelch detection thresholdWilliam wu
2017-02-23google/gru: update the pwm regulatorCaesar Wang
2017-02-23google/gru: improve eye diagram for passing the testCaesar Wang
2017-02-22google/gru: Fix whitespacePatrick Georgi
2017-02-11google/gru: add scarlet variantphilipchen
2017-01-22gru: kevin: define GPIOs used on both platformsVadim Bendebury
2017-01-13gru: Tuning USB 2.0 PHY0 and PHY1 host-portWilliam wu
2016-12-06Bob: Update the memory ramid of bobShasha Zhao
2016-12-06Bob: add bob in corebootShasha Zhao
2016-12-06rockchip/rk3399: sdram: use register to calculate sdram sizesLin Huang
2016-12-06google/gru: Power-cycle USB ports in developer/recovery modesJulius Werner
2016-12-01lib: put romstage_handoff implementation in own compilation unitAaron Durbin
2016-11-29google/gru: Tune USB 2.0 PHY to increase compatibilityWilliam wu
2016-11-18google/chromeec: Add common infrastructure for boot-mode switchesFurquan Shaikh
2016-11-17google/gru: Move to one CA training patternDerek Basehore
2016-11-17google/gru: Add new CA training patternDerek Basehore
2016-11-02rockchip/rk3399: display: Do not allocate framebuffer in corebootLin Huang
2016-11-02rockchip/rk3399: sdram: also prepare the index1 configurationLin Huang
2016-10-25rockchip/rk3399: gru/kevin: drop unused sdram configsLin Huang
2016-10-25rockchip/rk3399: reset system if DDR init failsLin Huang
2016-10-08google/gru: Add USB 2.0 PHY tuning for Kevin PHY0 and PHY1William wu
2016-10-07google/gru: drive WLAN_MODULE_RST# low as early as possibleBrian Norris
2016-10-07google/gru: set W2W_DIFFCS_DLY to 5Lin Huang
2016-10-07google/gru: pass apio number to arm-trust-firmwareLin Huang
2016-10-07google/gru: pass the gpio power supply enable pin to bl31Lin Huang
2016-10-06rockchip: rk3399: improve write leveling flowJianqun Xu
2016-10-06google/gru: Shrink RW_ELOG region to 4KBJulius Werner
2016-10-06rockchip: rk3399: improve sdram noc timingLin Huang
2016-10-06rockchip/rk3399: lower kevin board sdram frequency to 800MHzLin Huang