summaryrefslogtreecommitdiff
path: root/src/mainboard/google/glados
AgeCommit message (Collapse)Author
2021-01-21mb/google/glados: do UART pad configuration at board-levelMichael Niewöhner
UART pad configuration should not be done in common code, because that may cause short circuits, when the user sets a wrong UART index. Thus, add the corresponding pads to the early gpio table for the board as a first step. Common UART pad config code then gets dropped in CB:48829. Also switch to `bootblock_mainboard_early_init` to configure the pads in early bootblock before console initialization, to make the console work as early as possible. The board does not do any other gpio configuration in bootblock, so this should not influence behaviour in a negative way (e.g. breaking overrides). Change-Id: I6fedcebea3bb31d992bac1e3b21382fea93a8b82 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49429 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-06soc/intel/skylake: Move MAX_CPUS from mb to SoCFelix Singer
Configure MAX_CPUS in SoC Kconfig with 8 as default value and remove it from every mainboard where 8 is used. Change-Id: I825625bf842e8cd22dada9a508a7176e5cc2ea57 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49105 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-01nb/intel/hsw,soc/intel/{bdw,skl,apl},mb/*: unify dt panel settingsMichael Niewöhner
There are multiple different devicetree setting formats for graphics panel settings present in coreboot. Replace the ones for the platforms that already have (mostly) unified gma/graphics setup code by a unified struct in the gma driver. Hook it up in HSW, BDW, SKL, and APL and adapt the devicetrees accordingly. Always ensure that values don't overflow by applying appropriate masks. The remaining platforms implementing panel settings (GM45, i945, ILK and SNB) can be migrated later after unifying their gma/graphics setup code. Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: I445defe01d5fbf9a69cf05cf1b5bd6c7c2c1725e Reviewed-on: https://review.coreboot.org/c/coreboot/+/48885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-12-14soc/intel/skylake: Drop always-zero ProbelessTrace dt settingAngel Pons
This seems to be a debugging option. Since unset devicetree options default to zero, drop the setting. If it is needed in the future, a user-visible Kconfig option would probably make more sense. Change-Id: I0a71bc407fa92da3dcc0e3dbd666438d4280ffcb Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14soc/intel/skylake: Drop unreferenced PttSwitch dt settingAngel Pons
The value for this setting is not used anywhere. Drop it. Change-Id: I75f6cdec6c69b374a07519bf9058b8f6e4916307 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48573 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-12-14mb/google/glados/var/caroline: Drop zero setting from dtAngel Pons
Unset devicetree options already default to zero. Note that this setting is not referenced anywhere else, and will be removed in a follow-up. Change-Id: I7bcc1c66caa9167c2327e1dc782f69c5de0fac2e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48579 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-12-02cbfs: Simplify load/map API names, remove type argumentsJulius Werner
This patch renames cbfs_boot_map_with_leak() and cbfs_boot_load_file() to cbfs_map() and cbfs_load() respectively. This is supposed to be the start of a new, better organized CBFS API where the most common operations have the most simple and straight-forward names. Less commonly used variants of these operations (e.g. cbfs_ro_load() or cbfs_region_load()) can be introduced later. It seems unnecessary to keep carrying around "boot" in the names of most CBFS APIs if the vast majority of accesses go to the boot CBFS (instead, more unusual operations should have longer names that describe how they diverge from the common ones). cbfs_map() is paired with a new cbfs_unmap() to allow callers to cleanly reap mappings when desired. A few new cbfs_unmap() calls are added to generic code where it makes sense, but it seems unnecessary to introduce this everywhere in platform or architecture specific code where the boot medium is known to be memory-mapped anyway. In fact, even for non-memory-mapped platforms, sometimes leaking a mapping to the CBFS cache is a much cleaner solution than jumping through hoops to provide some other storage for some long-lived file object, and it shouldn't be outright forbidden when it makes sense. Additionally, remove the type arguments from these function signatures. The goal is to eventually remove type arguments for lookup from the whole CBFS API. Filenames already uniquely identify CBFS files. The type field is just informational, and there should be APIs to allow callers to check it when desired, but it's not clear what we gain from forcing this as a parameter into every single CBFS access when the vast majority of the time it provides no additional value and is just clutter. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: Ib24325400815a9c3d25f66c61829a24a239bb88e Reviewed-on: https://review.coreboot.org/c/coreboot/+/39304 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-24mb/**/cmos.layout: Drop copy-pasted SNB entries on non-SNBAngel Pons
Only Sandy Bridge MRC stores scrambler seeds in CMOS. Non-Sandybridge boards ended up with these entries because of copy-paste programming. Change-Id: I5a5bda6ea4e63ba03a4219bb2a6aa546bb6ecd7a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47149 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-11-23mb/**/cmos.layout: Indent everything with tabsAngel Pons
Time has shown that using spaces never converges into proper alignment. Change-Id: I5338aeaf139580f9eab3e1e02cb910080a95d2c2 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-23mb/**/cmos.layout: Remove crusty commentsAngel Pons
Most of these comments have been copy-pasted or serve no purpose other than to eventually turn into misleading info. While the description of the first 120 bits of CMOS could be useful, it should instead be added to the documentation for the CMOS option infrastructure, or /dev/null. Moreover, trim down newlines to no more than two consecutive newlines. Change-Id: I119b248821221e68c4e31edba71ba83b7d2e14e9 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/47143 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-11-13soc/intel/{skl,cnl}: replace PM ACPI timer dt option by KconfigMichael Niewöhner
Select `PM_ACPI_TIMER_OPTIONAL` to enable the new PM ACPI Kconfig and set the FSP option for PM ACPI timer enablement from its value instead of using the old devicetree option. Also drop the obsolete devicetree option from soc code and from the mainboards and add a corresponding Kconfig entry instead. Change-Id: I10724ccf1647594404cec15c2349ab05b6c9714f Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45955 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-26mb/*,soc/intel: drop the obsolete dt option `speed_shift_enable`Michael Niewöhner
The dt option `speed_shift_enable` is obsolete now. Drop it. Change-Id: I5ac3b8efe37aedd442962234478fcdce675bf105 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46462 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
2020-10-21soc/intel,mb/*: get rid of legacy pad macrosMichael Niewöhner
Get rid of legacy pad macros by replacing them with their newer equivalents. TEST: TIMELESS-built board images match Change-Id: I078f9bb3c78f642afc6dcfd64d77be823a4485c2 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46567 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-10-13{src/mb,util/autoport}: Use macro for DSDT revisionElyes HAOUAS
Change-Id: I5a5f4e7067948c5cc7a715a08f7a5a3e9b391191 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45904 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2020-10-13mb, soc/intel: Switch to using drivers/wifi/generic for Intel WiFi devicesFurquan Shaikh
This change switches all mainboard devices to use drivers/wifi/generic instead of drivers/intel/wifi chip driver for Intel WiFi devices. There is no need for two separate chip drivers in coreboot to handle Intel and non-Intel WiFi devices since the differences can be handled at runtime using the PCI vendor ID. This also allows mainboard to easily multi-source WiFi chips and still use the same firmware image without having to distinguish between the chip drivers. BUG=b:169802515 BRANCH=zork Change-Id: Ieac603a970cb2c9bf835021d1fb0fd07fd535280 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-10-05soc/intel/common/block/acpi: Factor out common platform.aslSubrata Banik
This patch moves platform.asl into common block acpi directory to avoid duplicating the same ASL code block across SoC directory. TEST=Able to build and boot TGL, CNL and CML platform. 1) Dump and disassemble DSDT, verify _PIC method present inside common platform.asl is still there. 2) Verify no ACPI error seen while running 'dmesg` from console. Signed-off-by: Subrata Banik <subrata.banik@intel.com> Change-Id: I5189b03d6abfaec39882d28b40a9bfa002128be3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45982 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-09-23treewide: rename GENERIC_SPD_BIN to HAVE_SPD_BIN_IN_CBFSMichael Niewöhner
The name GENERIC_SPD_BIN doesn't reflect anymore what that config is used for, so rename it to HAVE_SPD_BIN_IN_CBFS. Change-Id: I4004c48da205949e05101039abd4cf32666787df Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45147 Reviewed-by: Felix Singer <felixsinger@posteo.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-09-22mb/google: Drop unneeded empty linesElyes HAOUAS
Change-Id: I4151d1a6ce94763432f307fbc8bc4afe229856ea Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44616 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2020-09-06mb: remove duplicated Make code for spd.bin generationMichael Niewöhner
Drop duplicated code for spd.bin generation that is provided globally in lib/Makefile.inc. For all affected boards it has been verified that the output binary functionally matches the original one. The changed execution order of Make instructions influenced the cbfs file order. Hence, the rom images can't be compared directly. Thus, the output files of the two timeless abuild runs have been compared. Further, it was verified that the final files in cbfs stay identical, by comparing the extracted cbfs of each board. The boards (possibly) needing modification could be found with something like this (with false positives, though): find src/mainboard -name Makefile.inc | \ xargs egrep 'SPD_BIN|SPD_DEPS' | cut -d: -f1 | sort -u Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Change-Id: Icd3ac0fd6c901228554115c6350d88bb49874587 Reviewed-on: https://review.coreboot.org/c/coreboot/+/44774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-09-06mb/*: devicetree: drop now unneeded USBx_PORT_EMPTYMichael Niewöhner
Setting USBx_PORT_EMPTY is not a requirement anymore, since unset devicetree settings default to 0 and the OC pin now only gets set when the USB port is enabled (see CB:45112). Thus, drop the setting from all devicetrees. Change-Id: I899349c49fa7de1c1acdca24994ebe65c01d80c6 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/45125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <felixsinger@posteo.net>
2020-09-02mb/*/Kconfig: Drop redundant 'select DRIVERS_INTEL_WIFI'Elyes HAOUAS
DRIVERS_INTEL_WIFI is already set to yes. Change-Id: I09f628a9c1feb8992b6fe7c7ca93c75243ffc0f1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-08soc/intel/skylake: Enable CIO depending on devicetree configurationFelix Singer
Currently, CIO gets enabled by the option Cio2Enable, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the CIO controller. All corresponding mainboards were checked if the devicetree configuration matches the Cio2Enable setting, and missing entries were added. Change-Id: I65e2cceb65add66e3cb3de7071b1a3cc967ab291 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44032 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-08-08soc/intel/skylake: Enable SDXC depending on devicetree configurationFelix Singer
Currently, SDXC gets enabled by the option ScsSdCardEnabled, but this duplicates the devicetree on/off options. Therefore, depend on the devicetree for the enablement of the SDXC controller. All corresponding mainboards were checked if the devicetree configuration matches the ScsSdCardEnabled setting, and missing entries were added. Change-Id: I298b7d0b0fe2a7346dbadcea4be22dc67fce4de8 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44028 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-08-07soc/intel/skylake: Enable thermal subsystem depending on devicetreeFelix Singer
Currently SA thermal subsystem gets enabled by the option Device4Enable, but this duplicates the devicetree on/off options. Therefore depend on the devicetree for enablement of the SA thermal subsystem controller. All corresponding mainboards were checked if the devicetree configuration matches the Device4Enable setting, and missing entries were added. Change-Id: I7553716d52743c3e8d82891b2de14c52c6d8ef16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44026 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable HDA depending on devicetree configurationFelix Singer
Currently HDA gets enabled by the option EnableAzalia, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the HDA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableAzalia setting. Change-Id: Id20d023b2f286753fb223050292c7514632e1dd3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43866 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable eMMC depending on devicetree configurationFelix Singer
Currently eMMC gets enabled by the option ScsEmmcEnabled, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the eMMC controller. I checked all corresponding mainboards if the devicetree configuration matches the ScsEmmcEnabled setting. Change-Id: I3b86ff6e2f15991fb304b71d90c1b959cb6fcf43 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable TraceHub depending on devicetree configurationFelix Singer
Currently TraceHub gets enabled by the option EnableTraceHub, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the TraceHub controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableTraceHub setting. Change-Id: Idcd1e5035bc66c48620e4033d8b4988428e63db9 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43847 Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-29soc/intel/skylake: Enable SMBus depending on devicetree configurationFelix Singer
Currently SMBus gets enabled by the option SmbusEnable, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SMBus controller. I checked all corresponding mainboards if the devicetree configuration matches the SmbusEnable setting. Change-Id: I0d9ec1888c82cc6d5ef86d0694269c885ba62c41 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43845 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-29soc/intel/skylake: Enable LAN depending on devicetree configurationFelix Singer
Currently LAN gets enabled by the option EnableLan, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the LAN controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableLan setting. Change-Id: I36347e8e0f0ddba47aec52aeb6bc047e3c8bfaa4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43844 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-29soc/intel/skylake: Enable SATA depending on devicetree configurationFelix Singer
Currently SATA gets enabled by the option EnableSata, but this duplicates the devicetree on/off options. Therefore use the on/off options for the enablement of the SATA controller. I checked all corresponding mainboards if the devicetree configuration matches the EnableSata setting. Change-Id: I217dcb7178f29bbdeada54bdb774166126b47a5a Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-01ACPI GNVS: Replace uses of smm_get_gnvs()Kyösti Mälkki
Change-Id: I7b657750b10f98524f011f5254e533217fe94fd8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2020-06-19Kconfig: Escape variable to accommodate new Kconfig versionsPatrick Georgi
Kconfig 4.17 started using the $(..) syntax for environment variable expansion while we want to keep expansion to the build system. Older Kconfig versions (like ours) simply drop the escapes, not changing the behavior. While we could let Kconfig expand some of the variables, that only splits the handling in two places, making debugging harder and potentially messing with reproducible builds (e.g. when paths end up in configs), so escape them all. Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
2020-05-18skylake: update processor power limits configurationSumeet R Pawnikar
Update processor power limit configuration parameters based on common code base support for Intel Skylake SoC based platforms. BRANCH=None BUG=None TEST=Built and tested on nami system Change-Id: Idc82f3d2f805b92fb3005d2f49098e55cb142e45 Signed-off-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-05-18src: Remove leading blank lines from SPDX headerElyes HAOUAS
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360 Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-09src/: Replace GPL boilerplate with SPDX headersPatrick Georgi
Used commands: perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist) perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist) Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-02acpi: Move ACPI table support out of arch/x86 (3/5)Furquan Shaikh
This change moves all ACPI table support in coreboot currently living under arch/x86 into common code to make it architecture independent. ACPI table generation is not really tied to any architecture and hence it makes sense to move this to its own directory. In order to make it easier to review, this change is being split into multiple CLs. This is change 3/5 which basically is generated by running the following command: $ git grep -iIl "arch/acpi" | xargs sed -i 's/arch\/acpi/acpi\/acpi/g' BUG=b:155428745 Change-Id: I16b1c45d954d6440fb9db1d3710063a47b582eae Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2020-04-28device: Constify struct device * parameter to write_acpi_tablesFurquan Shaikh
.write_acpi_tables() should not be updating the device structure. This change makes the struct device * argument to it as const. Change-Id: I50d013e83a404e0a0e3837ca16fa75c7eaa0e14a Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2020-04-06mb/google/glados: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I3c90ef02041799954aa656924df8c07325b83431 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40175 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-04-05mb/google/glados: Use ACPI brightness controlsMatt DeVillier
Enables ACPI backlight controls under Windows. Test: build/boot chell variant, verify screen backlight controls available and functional under Windows 10. Change-Id: Ida0102ac828254ae195528a8f1de078abed4a491 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40121 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-04-03mb/google/glados: convert to overridetreeMatt DeVillier
Simplify glados variants by converting to overridetree format. Change-Id: I6dd7a4b1ae7f1d3ce9fadb06ea95e021a1c880a5 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39983 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/glados: drop VR configs from devicetreeMatt DeVillier
The VR config values used in the variants' devicetrees is identical to the domain defaults in vr_config.c, with the exception of the icc_max value, which is calculated dynamically based on SKU, and again matches the default values for each domain and each varaint. Test: add a print function to dump the VR config values for each domain from the UPDs after setting, verify same output before/after. Change-Id: I4307f6e19ae6f99d4f5e475b181fd66c5b92f28c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39982 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-03mb/google/glados: clean up variant devicetreesMatt DeVillier
In preparation for conversion to overridetree format, clean up the variant devicetrees in order to minimize the differences across glados variants. This entails: - minor reformatting and reordering of devicetree entries - addition of setting default values on boards which skipped them - disabling unused I2C2 on boards which left it enabled - ensuring TCC offset set for all SKL-Y boards - setting VR mailbox command 1 for caroline - skipping init for UART2 on cave and glados - dropping unused PCIe RP5 for sentry Change-Id: I628b20a69fab187e67901c9eb98c0e2ddcb76b0d Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39981 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-02Trim `.acpi_fill_ssdt_generator` and `.acpi_inject_dsdt_generator`Nico Huber
These two identifiers were always very confusing. We're not filling and injecting generators. We are filling SSDTs and injecting into the DSDT. So drop the `_generator` suffix. Hopefully, this also makes ACPI look a little less scary. Change-Id: I6f0e79632c9c855f38fe24c0186388a25990c44d Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39977 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: David Guckian Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-29mb/google/glados: disable serial console by defaultMatt DeVillier
Glados boards do not have an exposed serial port outside of the servo interface. Set board Kconfig so that a default built image with Tianocore payload is bootable and doesn't hang due to trying to send data over a non-existant serial port. Test: build/boot google/chell with board defaults Change-Id: Ifad6f805e66438e2c436d9fa235d9be2ecf69179 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-03-29mb/google/glados: remove Chrome-EC defaultsMatt DeVillier
Chrome-EC/PD images for all glados variants need to be built from the board-specific branch, not master. Including the default board names serves no purpose and requires users to deselect the "use built-in EC firmware" in order for the board to build. Test: build google/chell with defaults Change-Id: Ic10f11337b85035068cdc4fe8147413e6b7f57ac Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39890 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-03-20drivers/generic/max98357a: Allow custom _HID from configAamir Bohra
Add HID field in max98357a_config and allow mainboards to set it. Signed-off-by: Aamir Bohra <aamir.bohra@intel.com> Change-Id: I22d2d078a9a4eb6ab330da8439737ff5133086d4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39286 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-20mb/**/gma-mainboard.ads: Use SPDX for GPL-2.0-or-laterAngel Pons
Change-Id: I78f06b54a6a03d565cf86f1d7bdf37965c3f6ad0 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39660 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-03-18mainboard/google: Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I09cc279b1f75952bb397de2c3f2b299255163685 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39607 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2020-03-093rdparty/libgfxinit: Update submodule pointerNico Huber
Changes allow to use the integrated panel logic (power sequen- cing and backlight control) for more connectors. The Kconfigs GFX_GMA_PANEL_1_PORT and GFX_GMA_PANEL_2_PORT can now be set to any port, e.g. config GFX_GMA_PANEL_1_PORT default "DP3" Now that the panel logic is not tied to the `Internal` port choice anymore, we can properly split it into `LVDS` and `eDP`. This also adds Comet Lake PCI IDs which should still work the same as Kaby and Coffee Lake. Change-Id: I78b1b458ca00714dcbe7753a7beb4fb05d69986b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38921 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-07chromeos: stop sharing write protect GPIO with depthchargeJoel Kitching
wpsw_boot is deprecated in favour of wpsw_cur. As such, coreboot no longer needs to share "write protect" GPIO with depthcharge. BUG=b:124141368, chromium:950273 TEST=make clean && make test-abuild BRANCH=none Change-Id: I2fcb7f82aa063fd72928171af5cbef0356ba620c Signed-off-by: Joel Kitching <kitching@google.com> Cq-Depend: chromium:2088434 Reviewed-on: https://review.coreboot.org/c/coreboot/+/39318 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-01-10src: Remove blank acpi_tables source filesKarthikeyan Ramasubramanian
Due to build rules, dummy acpi_tables source files were added in many mainboards. With commit 1e83e5c61a3aa98f58f7d8cbf8d1eb9532896cc3 ("src/arch/x86: Build mainboard acpi_tables source if present"), the build system will build mainboard acpi_tables only if present. Remove the dummy/empty/blank acpi_tables source files. BUG=None TEST=Build test with some google mainboards. Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Change-Id: I0cef34368e2e5f5e3b946b22658ca10c7caad90a Reviewed-on: https://review.coreboot.org/c/coreboot/+/37854 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-12-31mb/**/dsdt.asl: Remove outdated sleepstates.asl commentAngel Pons
Previously, each Intel chipset had its own sleepstates.asl file. However, this is no longer the case, so drop these comments. Change-Id: I50aba6e74f41e2fa498375b5eb6b7e993d06bcac Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-21mb/**/dsdt.asl: Remove "Some generic macros" commentAngel Pons
It provides no useful information, so it might as well vanish. Change-Id: I0df6f4639a16058486c2e2d40fe4067d65670731 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2019-12-02mb/google/glados: restore device-specific VBTsMatt DeVillier
When migrating glados (and variants) to FSP 2.0, the older board- specific VBTs were dropped in favor of the default FSP 2.0 VBT due to compatibility issues. Now that libgfxinit is available and the default, restore the board-specific VBTs so that external displays function properly. Select MAINBOARD_NO_FSP_GOP for all variants except glados since FSP/GOP init will not function properly with the older VBTs. Test: build/boot chell and caroline variants w/libgfxinit, verify external displays now work again. Change-Id: If55a67e0d3d78e4acf80cee1733ad8e14b8847d4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-28mainboard/google: Remove unused include <stdlib.h>Elyes HAOUAS
Change-Id: I9e71474bea61befd61900aff554f32f1bc782a77 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33699 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2019-11-27google/glados: add libgfxinit supportMatt DeVillier
Both linear framebuffer and vga text mode verified on chell and caroline variants Change-Id: I106e7bb761055581634176a112816be8447e6745 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/37205 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-26soc/intel/skylake: drop support for FSP 1.1Michael Niewöhner
This drops support for FSP 1.1 in soc/intel/skylake, after all boards have been migrated to FSP 2.0, which is backwards compatible. Any moving of files happens in a follow-up commit to make review easier. Change-Id: I0dd2eab0edfda0545ff94c3908b8574d5ad830bd Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35813 Reviewed-by: Michael Niewöhner Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-25mb/google/{glados,dragonegg}: Configure GPIOs in mainboard chip->init()Furquan Shaikh
mainboard_silicon_init_params() is supposed to be used for only overriding any FSP params as per mainboard configuration. GPIOs should be configured by mainboard as part of its chip init(). This ensures proper ordering w.r.t. any common operations that the SoC code might want to perform e.g. snapshot ITSS polarities. This change moves the configuration of GPIOs from mainboard_silicon_init_params() to mainboard chip->init(). Change-Id: I5d10c01c5b9d5f8ed02274d51dcf9c2a17269685 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36270 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-22google/chell: Update ICC_MAX configurationMatt DeVillier
Correct ICC_MAX values per SKL-Y EDS spec. Adapted from chromium commit 1c4e89e8 [Chell: Update ICC_MAX configuration] Original-Change-Id: Ic660cc6a2d11e995a86a30ddde800d096d93e012 Original-Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/593715 Original-Reviewed-by: Duncan Laurie <dlaurie@google.com> Change-Id: Ia31ce432cf979d574d84e9205a287f87de5de057 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35958 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Michael Niewöhner
2019-10-21mb/google/glados: port to FSP 2.0Michael Niewöhner
This patch is part of the patch series to drop support for FSP 1.1 in soc/intel/skylake. The following modifications have been done to migrate the board(s) from FSP 1.1 to FSP 2.0: - remove deprecated devicetree VR_RING domain (only 4 domains in FSP 2.0) - switch to using the FSP default VBT TODO: - testing Change-Id: Id747ef484dfdcb2d346f817976f52073912468d0 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-30mb: remove test-only HWIDsHung-Te Lin
The CONFIG_GBB_HWID can be generated automatically now so we can remove the test-only HWIDs set in board config files. BUG=b:140067412 TEST=Built few boards (kukui, cheza, octopus) and checked HWID: futility gbb -g coreboot.rom Change-Id: I4070f09d29c5601dff1587fed8c60714eb2558b7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35635 Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-09-15src/mainboard: Remove not used #include <elog.h>Elyes HAOUAS
Change-Id: I901cb35488e08f58cdf97f3a8d0f5a8d03560f86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33729 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-20mb/google/{eve,glados}: Copy channel arrays separatelyJacob Garber
DqByteMapCh0 and DqByteMapCh1 are declared adjacently in the FSP_M_CONFIG struct, so it is tempting to begin memcpy at the address of the first array and overwrite both of them at once. However, FSP_M_CONFIG is not declared with the packed attribute, so this is not guaranteed to work and is undefined behaviour to boot. It is cleaner and less tricky to copy them independently. The same is true for DqsMapCpu2DramCh0 and DqsMapCpu2DramCh1, so we change those as well. Change-Id: If394f14c4a39d6787ae31868241229646c26be7a Signed-off-by: Jacob Garber <jgarber1@ualberta.ca> Found-by: Coverity CID 1365730, 14013{38,39,40,42,43} Reviewed-on: https://review.coreboot.org/c/coreboot/+/33066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-08-15mainboard/google: Fix indirect includesKyösti Mälkki
Change-Id: Ie79702efab519b16cff45ccad61b95e7d8c2fbac Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34854 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-25mb/*/chromeos.c: Remove some ENV_RAMSTAGE and __SIMPLE_DEVICE__Kyösti Mälkki
Use explicit simple PCI config accessors here. Change-Id: Ifa3814fdd7795479ca5fdbfc4deb3fe8db9805f3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-19src/mainboard: Remove unused include <arch/byteorder.h>Elyes HAOUAS
Change-Id: I3d638febddbd88cd4870795f96dd1bbf123c7ba3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33537 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06mb/google: Add GPU panel settings for SKL/KBL boardsNico Huber
The values are generated from the respective VBTs. Change-Id: Ic74e9dac898c17ce64a94b06682997a39daeff69 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30247 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-29drivers/intel/fsp1.1: Simplify bootflow and clean upArthur Heymans
This gets rid of the boilerplate back and forward calls between the SOC/FSP-driver code and mainboard code. Change-Id: I5d4a10d1da6b3ac5e65efd7f82607b56b80e08d4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32961 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-05-13mainboard: remove "recovery" gpio, selectively add "presence" gpio.Matt Delco
The gpio table is only used by depthcharge, and depthcharge rarely has a need for the "recovery" gpio. On a few boards it does use the gpio as a signal for confirming physical presence, so on that boards we'll advertise the board as "presence". All these strings probably should have been #defines to help avoid typos (e.g., the "ec_in_rw" in stout seems questionable since everybody else uses "EC in RW"). Cq-Depend: chromium:1580454 BUG=b:129471321 BRANCH=None TEST=Local compile and flash (with corresponding changes to depthcharge) to 2 systems, one with a "presence" gpio and another without. Confirmed that both systems could enter dev mode. Change-Id: Id6d62d9e48d3e6646cbc1277ea53f0ca95dd849e Signed-off-by: Matt Delco <delco@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-05-07mb/google/glados: Refactor to get rid of `pei_data`Nico Huber
The SoC specific `struct pei_data` was filled with values that were later only consumed by the mainboard code again. Avoid jumping through this hoop and fill FSP UPDs directly. Change-Id: I040f4a55b4f4bad3f6072920e5e2eceded4cb9bb Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2019-04-06{mb,soc/intel/skylake}: remove unused InternalGfxMaxim Polyakov
The InternalGfx option in devicetree.cb is not used to enable iGPU. The patch removes this option from chip.h and mb/*/devicetree.cb files for all boards with skl/kbl processor. Change-Id: I41ecca3fdfb1d4b20ee634a13263ff481dcf440e Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32171 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-03-20src: Use 'include <string.h>' when appropriateElyes HAOUAS
Drop 'include <string.h>' when it is not used and add it when it is missing. Also extra lines removed, or added just before local includes. Change-Id: Iccac4dbaa2dd4144fc347af36ecfc9747da3de20 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-03-08coreboot: Replace all IS_ENABLED(CONFIG_XXX) with CONFIG(XXX)Julius Werner
This patch is a raw application of find src/ -type f | xargs sed -i -e 's/IS_ENABLED\s*(CONFIG_/CONFIG(/g' Change-Id: I6262d6d5c23cabe23c242b4f38d446b74fe16b88 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-03-05mainboard: Enable PRESERVE flag in all vboot/chromeos FMD filesHung-Te Lin
For Chrome OS (or vboot), The PRESERVE flags should be applied on following sections: RO_PRESERVE, RO_VPD, RW_PRESERVE, RW_ELOG, RW_NVRAM, RW_SMMSTORE, RW_VPD, RO_FSG (b:116326638), SI_GBE (chromium:936768), SI_PDR (chromium:936768) With the new PRESERVE flag, we don't need RO_PRESERVE and RW_PRESERVE in the future. But it's still no harm to use it if there are multiple sections all needing to be preserved. BUG=chromium:936768 TEST=Builds google/eve and google/kukui inside Chrome OS source tree. Also boots successfully on eve and kukui devices. Change-Id: I6664ae3d955001ed14374e2788d400ba5fb9b7f8 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01soc/intel/skylake: Unify serial IRQ optionsNico Huber
We had two ways to configure the serial IRQ mode. One time in the devicetree for FSP and one time through Kconfig for coreboot. We'll use `enum serirq_mode` from soc/intel/common/ as a devicetree option instead. As the default is `quiet mode` here and that is the most common mode, this saves us a lot of lines. In four cases kblrvp8, 11 and librem 13v2, 15v3, we had conflicting settings in devicetree and Kconfig. We'll maintain the `continuous` selection, although it might be that coreboot overrode this earlier on the kblrvps. Note: A lot of Google boards have serial IRQ enabled, while the pin seems to be unconnected? Change-Id: I79f0cd302e335d8dcf8bf6bc32f3d40ca6713e5c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/31596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2019-02-18soc/intel/skylake: Use real common code for VMX initNico Huber
Use the common VMX implementation, and set IA32_FEATURE_CONTROL lock bit per Kconfig *after* SGX is configured (as SGX also sets bits on the IA32_FEATURE_CONTROL register). As it is now correctly based on a Kconfig, the `VmxEnable` devicetree setting vanishes. Test: build/boot google/[chell,fizz], observe Virtualization enabled under Windows 10 when VMX enabled and lock bit set. Change-Id: Iea598cf74ba542a650433719f29cb5c9df700c0f Signed-off-by: Nico Huber <nico.h@gmx.de> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/29682 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-16buildsystem: Promote rules.h to default includeKyösti Mälkki
Does not fix 3rdparty/, *.S or *.ld or yet. Change-Id: I66b48013dd89540b35ab219d2b64bc13f5f19cda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/17656 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-01-11soc/mainboard: Update mainboard UART KconfigLijian Zhao
After f5ca922 (Untangle CBFS microcode updates) got merged, all mainboard using intel apollolake, cannonlake, coffeelake, glk, kabylake, skylake, icelake and whiskeylake get affected. Using INTEL_LPSS_UART_FOR_CONSOLE instead of UART_DEBUG and set default console for each platform. BUG=N/A TEST=Build and test on Sarien platform, by default we can still get console from cbmem, and enable CONSOLE_SERIAL can get logs from UART port 2. Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Change-Id: I550a00144cff21420537bb161c64e7a132c5d2de Reviewed-on: https://review.coreboot.org/c/30853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-03mb/google/{glados & variants}: Remove duplicated HAVE_SMI_HANDLERElyes HAOUAS
HAVE_SMI_HANDLER is already selected in soc/intel/skylake/Kconfig Use "smm-$(CONFIG_HAVE_SMI_HANDLER)" in Makefile.inc files. Change-Id: Ia60e34ee03958b05f2ac0c326632b6dd9f02a2e0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30476 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-12-29mb/google/glados/variants/caroline/devicetree.cb: Remove unneeded white spacesElyes HAOUAS
Change-Id: I7fdf8934187d2786fdac23ed4460147867c25044 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30460 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-12-18src/mb/google/*/Kconfig: Consistently use $(...) for variablesJonathan Neuschäfer
Using ${...} in some places is slightly confusing. Fixes: 395cbb4f97 ("mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetree") Change-Id: Id0856a10d92786a41d45ca697945699f6f4c1f4c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/c/30163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-11-30cpu/intel/common: Use a common acpi/cpu.asl fileArthur Heymans
Change-Id: Ifa5a3a22771ff2e0efa14fb765603fd5e0440d59 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/29894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: David Guckian
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-16mb/*/*/Kconfig: Use CONFIG_VARIANT_DIR for devicetreePeter Lemenkov
Change-Id: Ic9620cfa1630c7c085b6c244ca80dc023a181e30 Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/29595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2018-11-15ec/google/chromeec/acpi: Rename EC_ENABLE_TABLET_EVENT configKarthikeyan Ramasubramanian
Rename EC_ENABLE_TABLET_EVENT config as EC_ENABLE_MULTIPLE_DPTF_PROFILES since it aligns with the use-case. BUG=b:118149364 BRANCH=None TEST=Ensured that the expected DPTF table are loaded in different modes (base attached/detached and clamshell/360-flipped) on Soraka and Nautilus. Change-Id: If147f1c79ceaaed00e17ec80ec6c912a8f7a8c2e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/29261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2018-10-23src: Remove unneeded whitespaceElyes HAOUAS
Change-Id: I6c77f4289b46646872731ef9c20dc115f0cf876d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/29161 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2018-10-18mb/google/glados/variants/sentry: Remove unnneded whitespaceElyes HAOUAS
Change-Id: Ibc928dc66e00dbb40d25420fd92f6c5f8049dec1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28703 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-09-12mainboards: Add SMMSTORE region in chromeos configsPatrick Georgi
Only for those that are x86 and also have a RW_LEGACY region. The assumption is that all devices touched have 64k block sizes when choosing size and alignment of the region. Change-Id: I12addb137604f003d1296f34f555dae219330b18 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/28532 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-30google/caroline: Change debounce time for jack insertion and ejectionMatt DeVillier
Adapted from chromium commit 7633daa [caroline: Change debounce time for jack insertion and ejection] We are using max debounce time. During this time line, MICBIAS will be zero because of jack chasis. At the moment we got 0 button (PLAY/PAUSE) We need to reduce this time to below 100ms for caroline device. BUG=b:79559096 TEST=see there is no more irq before jack insertion/ejection irq complete Original-Change-Id: Ib6abdb4ff041823ca89f74cf59e2bfa644bb0d6a Original-Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Original-Reviewed-on: https://chromium-review.googlesource.com/1143109 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Wonjoon Lee <woojoo.lee@samsung.com> Change-Id: I8f605989d6ffc8a75127ed6722e7a37db95029ed Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27659 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26google/caroline: Add missing audio codec infoMatt DeVillier
Add audio codec definitions in devicetree, which were accidentally dropped when upstreaming Test: build/boot Caroline with GalliumOS 3.0a2, verify working audio. Change-Id: I707b93c83f773cde2108b75ec550a15e5566d974 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27626 Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-26google/caroline: Fix I2C2 ACPI device definitionMatt DeVillier
Remove duplicate FMCN package for I2C2, since already generated by the devicetree-linked generic i2c driver. This fixes an ACPI parsing error which resulted in the touchpad and touchscreen being non-functional. Test: build/boot Caroline with GalliumOS 3.0a2, verify touchpad and touchscreen functioning properly, no ACPI errors in dmesg. Change-Id: I68315daf087aef0fc51411605b054e6322d5d7f8 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-07-25mb/google/x86-boards: Get rid of power button device in corebootFurquan Shaikh
As per the ACPI specification, there are two types of power button devices: 1. Fixed hardware power button 2. Generic hardware power button Fixed hardware power button is added by the OSPM if POWER_BUTTON flag is not set in FADT by the BIOS. This device has its programming model in PM1x_EVT_BLK. All ACPI compliant OSes are expected to add this power button device by default if the power button FADT flag is not set. On the other hand, generic hardware power button can be used by platforms if fixed register space cannot be used for the power button device. In order to support this, power button device object with HID PNP0C0C is expected to be added to ACPI tables. Additionally, POWER_BUTTON flag should be set to indicate the presence of control method for power button. Chrome EC mainboards implemented the generic hardware power button in a broken manner i.e. power button object with HID PNP0C0C is added to ACPI however none of the boards set POWER_BUTTON flag in FADT. This results in Linux kernel adding both fixed hardware power button as well as generic hardware power button to the list of devices present on the system. Though this is mostly harmless, it is logically incorrect and can confuse any userspace utilities scanning the ACPI devices. This change gets rid of the generic hardware power button from all google mainboards and relies completely on the fixed hardware power button. BUG=b:110913245 TEST=Verified that fixed hardware power button still works correctly on nautilus. Change-Id: I733e69affc82ed77aa79c5eca6654aaa531476ca Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/27272 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-07-24google/glados: use level trigger for touchpad interruptMatt DeVillier
Coolstar's custom touchpad drivers for Windows require level triggering, and the Linux drivers don't care/perform identically either way. Set touchpad interrupt to level trigger, matching change made to other Chromebooks. Test: boot Windows 10 on google/chell, verify touchpad functional Change-Id: Id5f145b8b24c04f9c6661710a0cda95f135293e9 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27550 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-07-24google/glados: enable VMX for all variantsMatt DeVillier
Explicitly enable VMX, as some OSes (eg, Windows) need VMX feature enabled and locked in order to fully support virtualization Test: boot Windows 10 on google/chell, verify OS reports virtualization enabled Change-Id: I53ff575755a9ca376dbf953db96191c17bf57f5f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/27549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>