Age | Commit message (Expand) | Author |
2017-11-14 | mb/google/eve: Add DSP calibration clock name/rate for RT5514 | Cheng-Yi Chiang |
2017-11-14 | mb/google/eve: Set DSP SPI clock to 12MHz | Duncan Laurie |
2017-11-14 | mb/google/eve: Enable VMX | Duncan Laurie |
2017-11-14 | mb/google/eve: Tune I2C4 hold times | Duncan Laurie |
2017-11-14 | mb/google/eve: Enable AER and LTR | Furquan Shaikh |
2017-11-14 | mb/google/eve: Use rt5663 driver and set properties | Duncan Laurie |
2017-11-14 | mb/google/eve: Remove ACPI control of touchscreen power | Duncan Laurie |
2017-09-06 | mb/google/{poppy,soraka,eve}: Add imon and vmon params for Max98927 codec | Harsha Priya |
2017-08-30 | mb/google/eve: rt5514: Add 16ms delay on dmic init | Duncan Laurie |
2017-08-25 | soc/intel/skylake: Add LPC and SPI lock down config option | Subrata Banik |
2017-07-01 | mb/google/eve: Fix interrupt config for audio devices | Duncan Laurie |
2017-05-31 | mb/google/eve: Update thermal tuning parameters | Duncan Laurie |
2017-05-31 | mb/google/eve: Add power controls to touchscreen device | Duncan Laurie |
2017-05-25 | mainboard/google/eve: Update VR config settings | V Sowmya |
2017-05-17 | mb/google/eve: Remove FPC device from SPI1 | Duncan Laurie |
2017-05-17 | mb/google/eve: Update touchpad I2C timing | Duncan Laurie |
2017-04-27 | mb/google/eve: switch touchpad devicetree to i2c-hid and cros_ec i2c device | Wei-Ning Huang |
2017-04-20 | mainboard/google/eve: Set touchpad IRQ to level triggered | Duncan Laurie |
2017-04-15 | mainboard/google/eve: Remove 'probed' setting from rt5663 codec | Duncan Laurie |
2017-04-14 | mainboard/google/eve: Set UART0 to skip initialization in FSP | Duncan Laurie |
2017-04-13 | google/eve: Disable Deep S3 in AC mode | Duncan Laurie |
2017-04-13 | soc/intel/skylake: Split AC/DC settings for Deep Sx config | Duncan Laurie |
2017-04-10 | google/eve: Update I2C bus timing | Duncan Laurie |
2017-03-16 | google/eve: Use rt5663 interrupt as GpioInt instead of PIRQ | Duncan Laurie |
2017-03-15 | google/eve: Apply default AC/DC loadline settings | Duncan Laurie |
2017-03-15 | intel/skylake: Fix bug in VR configuration with FSP 2.0 | Duncan Laurie |
2017-03-15 | google/eve: Use rt5514 instead of 4ch DMIC | Duncan Laurie |
2017-02-25 | google/eve: Add rise/fall times for I2C buses | Duncan Laurie |
2017-02-22 | acpi: Add ACPI_ prefix to IRQ enum and struct names | Furquan Shaikh |
2017-02-20 | drivers/i2c: Use I2C HID driver for wacom devices | Furquan Shaikh |
2017-02-20 | google/eve: Set touchscreen I2C bus speed to 1MHz | Duncan Laurie |
2017-02-20 | google/eve: Add audio devices | Duncan Laurie |
2017-02-20 | google/eve: Set rise/fall timing values for I2C bus 1 | Duncan Laurie |
2017-02-20 | google/eve: Fix FPC support | Duncan Laurie |
2017-02-16 | mainboard/google/eve: Generate FPC device using SPI SSDT generator | Furquan Shaikh |
2017-02-14 | google/eve: change touchpad HID | Wei-Ning Huang |
2017-01-22 | google/eve: Fixes for devicetree settings | Duncan Laurie |
2016-12-16 | google/eve: Set throttle offset to 10 degrees | Duncan Laurie |
2016-12-16 | google/eve: Enable touch devices | Duncan Laurie |
2016-12-14 | google/eve: Configure I2C3 pins as GPIO inputs | Duncan Laurie |
2016-11-28 | soc/intel/skylake: Add USB Port Over Current (OC) Pin programming | Subrata Banik |
2016-11-11 | soc/intel/skylake: move i2c voltage config to own variable | Aaron Durbin |
2016-11-01 | google/eve: Add new board | Duncan Laurie |