Age | Commit message (Collapse) | Author |
|
Rename variant_base_gpio_table() to baseboard_gpio_table(), since the
GPIO table comes from the baseboard, and is overridden by a separate
table from the variant.
Drop the __weak qualifier as this function is not overridden.
Change-Id: I11814016d654bc2c2e6d24b3d18fb30d5b843fe9
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67805
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
BIOS_ERR is inappropriate since the init message is informational.
Use BIOS_INFO instead.
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: I6fc15291a6d177a1b9e258d08e165224e5e10b32
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67733
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch makes dedede EC wake up AP from s0ix when the state of
charge drops to low_battery_shutdown_percent.
Demonstrated as follows:
1. Boot OS.
2. Run powerd_dbus_suspend.
3. On EC, run battfake 4.
4. System resumes.
BUG=b:244253629
TEST=Verified on dedede
Change-Id: I39234d2b9e739383b5f96be49077f8c9831fa0fa
Signed-off-by: Ivan Chen <yulunchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add a variant specific S0ix hook to fill the SSDT table to disable and
enable camera during suspend and resume respectively.
BUG=b:206911455
TEST=Build Boten BIOS image. Ensure that camera is disabled during
suspend and enabled during resume.
Change-Id: I3229b22b8d8651bf2d9df25b10ce6749efde7cf6
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67388
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
|
|
Turn off the LAN power which is controlled by GPP_A10 in S0ix states.
For an USB device, the S0ix hook is needed for the on/off operationas
to take place.
BUG=b:245426120
BRANCH=firmware-dedede-13606.B
TEST=emerge-shotzo coreboot
check LAN LED off in S0ix states
check LAN function ok after suspending 500 loops
check SSDT table has MS0X entry
Scope (\_SB)
{
Method (MS0X, 1, Serialized)
{
If ((Arg0 == One))
{
\_SB.PCI0.CTXS (0x41)
}
Else
{
\_SB.PCI0.STXS (0x41)
}
}
}
Change-Id: I3fcab4a73239b4f006839c0c81e9b4cc74047b77
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67528
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:245426120
BRANCH=firmware-dedede-13606.B
TEST=emerge-dedede coreboot
check SSDT table has MS0X entry
Scope (\_SB)
{
Method (MS0X, 1, Serialized)
{
If ((Arg0 == One)) {}
Else
{
}
}
}
Change-Id: Id01089531503e62231c5ab19e4cd8056198b9acb
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Config I2C high / low time in device tree to ensure I2C
CLK runs accurately at I2C_SPEED_FAST (400 kHz).
EE measured touchscreen/audio runs at 385.5/397.9kHz after tuning.
BUG=b:244403643
BRANCH=firmware-dedede-13606.B
TEST=Build and check after tuning I2C clock is under 400kHz
Change-Id: I7d9503e5f92295432e31f09ae791eaa18eac9d4d
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67242
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Historically, ChromeOS devices have worked around the problem of OEMs
using several different parts for touchpads/touchscreens by using a
ChromeOS kernel-specific 'probed' flag (rejected by the upstream kernel)
to indicate that the device may or may not be present, and that the
driver should probe to confirm device presence.
Since c636142b, coreboot now supports detection for i2c devices at
runtime when creating the device entries for the ACPI/SSDT tables,
rendering the 'probed' flag obsolete for touchpads. Switch all touchpads
in the tree from using the 'probed' flag to the 'detect' flag.
Touchscreens require more involved power sequencing, which will be done
at some future time, after which they will switch over as well.
TEST: build/boot at least one variant for each baseboard in the tree.
Verify touchpad works under Linux and Windows. Verify only a single
touchpad device is present in the ACPI tables.
Change-Id: I47c6eed37eb34c044e27963532e544d3940a7c15
Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67305
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Update DPTF parameters from internal thermal team.
BUG=b:244373677
BRANCH=firmware-dedede-13606.B
TEST=Build image and verified by thermal team.
Change-Id: I8415e0d25a79764f0c1d11688728b7caa3b3d6a4
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67214
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
The current reset delay is not enough to make touchscreen IC ready,
ILITEK feedback their requiremt is 400ms in spec T2.
After changing the reset_delay_ms and check touchscreen works,
ILITE also change the IRO to low level trigger.
This CL is to reflect that.
BUG=b:235929123
BRANCH=firmware-dedede-13606.B
TEST=check touchscreen function work
Change-Id: I126b2d74c1d7a1799e2f67a8ab01cba074447c06
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
It is highly unlikely that the "OEM revision" of the DSDT is 0x20110725
on mainboards with a chipset not yet released on 2011-07-25. Since this
comment is most likely to have been copy-pasted from other boards, drop
it from boards which use a chipset newer than Sandy/Ivy Bridge.
Change-Id: If2f61d09082806b461878a76b286204ae56bf0eb
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66715
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
These comments don't add much value, so remove them.
Change-Id: I7e9692e3fe82345cb7ddcb11c32841c69768cd36
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66713
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
Update SoC GPIO setting of unused DMIC channel according to beadrix
schematics.
GPP_S2 : NF2 -> NC (DMIC1_CLK)
GPP_S3 : NF2 -> NC (DMIC1_DATA)
BUG=b:203113413, b:237224862
BRANCH=None
TEST=on beadrix, validated by beadrix's DMIC working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibe2f432cd74b546218ff4ee6e428e9eed9ac611f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65381
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add wifi sar for oscino
BUG=b:240373077
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede
coreboot-private-files-baseboard-dedede
coreboot
chromeos-bootimage.
Cq-Depend: chrome-internal:4893022
Change-Id: I44cbe8ee08d6136ed116623046893c9749795e50
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/66176
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update SoC GPIO setting of adding BC1.2 SLGC55545 according to beadrix
schematics.
GPP_A18 : NC -> NF1 (USB_OC0_N)
BUG=b:214393595, b:226294980
BRANCH=None
TEST=on beadrix, validated by beadrix's Type A working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I746931582cc12f49f7f1c667563350ebac8ddfa1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Enable I2C2 and register touchscreen ACPI device for pirika.
BUG=b:236564261
TEST=touch screen is functional.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Id2fd5606b7126eabc1c88bf516198ff00b5d75dd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add weida touchscreen support for drawcia.
BRANCH=dedede
TEST=Build and verify that touchscreen works on drawcia.
Change-Id: Ic76f3529771c6eeeafef7ca50fc400065aac2211
Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65471
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds memory part used by variant beadrix to
mem_part_used.txt and generates DRAM ID allocated to the part.
BUG=b:236750116
BRANCH=None
TEST=Run part_id_gen to generate SPD id
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I3f29609d9fe5143b0bfe4b78279d0780cd7e5097
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65306
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Based on latest schematic:
Set GPP_S2 DMIC1_CLK/ GPP_S3 DMIC1_DATA to NC.
BUG=b:235303242
BRANCH=dedede
TEST=build
Change-Id: I4044cb7ba963153e1e478294dbf960fb79b97b5c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65665
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
|
|
Branding changes to unify and update Chrome OS to ChromeOS (removing the
space).
This CL also includes changing Chromium OS to ChromiumOS as well.
BUG=None
TEST=N/A
Change-Id: I39af9f1069b62747dbfeebdd62d85fabfa655dcd
Signed-off-by: Jon Murphy <jpmurphy@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65479
Reviewed-by: Jack Rosenthal <jrosenth@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
Based on latest schematic:
1. Update devicetree for USB port description
2. Add touchscreen ILITEK, amplifier ALC1019, codec ALC5682
3. Configure GPIO table to reflect that
4. Remove APW8738BQBI IC so set "disable_external_bypass_vr to "1"
BUG=b:235303242, b:236791101
BRANCH=dedede
TEST=build
Change-Id: I38c8c5b913013d818ac6a26284184c9decdd9f4e
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65079
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update Shotzo own ec.h with the battery, lid and ps2
defines stripped.
This is to ensure the correct ASL is generated so that we don't
advertise PS2 keyboard support and battery/lid interrupts which
don't exist.
In MAINBOARD_EC_SCI_EVENTS drop following events.
EC_HOST_EVENT_LID_OPEN
EC_HOST_EVENT_LID_CLOSED
EC_HOST_EVENT_BATTERY_LOW
EC_HOST_EVENT_BATTERY_CRITICAL
EC_HOST_EVENT_BATTERY
EC_HOST_EVENT_BATTERY_STATUS
set MAINBOARD_EC_SMI_EVENTS to 0 and drop
EC_HOST_EVENT_LID_CLOSED smi event.
In MAINBOARD_EC_S5_WAKE_EVENTS drop below event.
EC_HOST_EVENT_LID_OPEN
In MAINBOARD_EC_S3_WAKE_EVENTS drop following events.
EC_HOST_EVENT_AC_CONNECTED
EC_HOST_EVENT_AC_DISCONNECTED
EC_HOST_EVENT_KEY_PRESSED
EC_HOST_EVENT_KEY_PRESSED
BUG=b:235303242
BRANCH=dedede
TEST=Build
Change-Id: I5717e2e8ca7549d160fe46ccde31c6d7cf9649d7
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65167
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
- MT53E512M32D2NP-046 WT:E
- H9HCNNNBKMMLXR-NEE
- K4U6E3S4AA-MGCR
- MT53E512M32D1NP-046 WT:B
- H54G46CYRBX267
- K4U6E3S4AB-MGCL
- K4U6E3S4AA-MGCL
BUG=b:235303242
BRANCH=dedede
TEST=build
Change-Id: Ie0ffdfed47b1791b990affd9eee262faede4b0c8
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65081
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
|
|
Update SoC GPIO setting of unused I2C camera pins according to beadrix
schematics.
GPP_H6 : NF1 -> NC (AP_I2C_CAM_SDA)
GPP_H7 : NF1 -> NC (AP_I2C_CAM_SCL)
BRANCH=dedede
BUG=b:235005592
TEST=on beadrix, validated by beadrix's camera still working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I8be57406a44096c764c1faa8f45267d08c4694fb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64971
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update FW_CONFIG probe for daughter board LTE and mainboard SAR
according to beadrix schematics.
BRANCH=dedede
BUG=b:226910787, b:213549229, b:233983127
TEST=on beadrix, validated by beadrix LTE working properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I126a1c548b6314acc0749fcfbdffd8f482c4f46c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Shotzo is not a laptop (it is a Chromebase), therefore deselect
BASEBOARD_DEDEDE_LAPTOP.
BUG=b:235303242
BRANCH=dedede
TEST=build
Change-Id: I4669ef163e4bd8f2de556a051197802ee2d54927
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65015
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create the shotzo variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0.).
BUG=b:235303242
BRANCH=dedede
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_SHOTZO
Change-Id: Ia3dc9ea6d1b369b54a966ad86f1531305b8a7f57
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65014
Reviewed-by: Zhuohao Lee <zhuohao@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
ALC5682-VD/ALC5682I-VS load different kernel driver by different hid
name. Update hid name depending on the AUDIO_CODEC_SOURCE field of
fw_config. Define FW_CONFIG bits 41 - 43 (SSFC bits 9 - 11) for codec
selection.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BRANCH=dedede
BUG=b:226910787,b:232057623
TEST=on beadrix, verified by FW_NAME=beadrix emerge-dedede coreboot.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I059b750743ab3b29d17c50d0d4301fbae4873acc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
|
|
To make sure daughter board LTE existing, we update probe to DB ports
value of FW_CONFIG field, (https://partnerissuetracker.corp.google.com/issues/226910787#comment11)
as well as, refer to Google Henry and Ivan comments (https://partnerissuetracker.corp.google.com/issues/226910787#comment14)
BRANCH=dedede
BUG=b:226910787
TEST=on beadrix, verified by FW_NAME=beadrix emerge-dedede coreboot.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I9ab4412b614ec665fbafc998756b805591982b65
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
suspend
To make sure Realtek RTL8822CE suspend stress test smoothly, we remove
1c.7 as wireless LAN (WLAN) connects the signal PCIE_4 and it will map
to 1c.7. refer to Intel Simon comment (https://partnerissuetracker.corp.google.com/issues/230386474#comment12),
as well as, remove redundant 17.0 and 1c.6 that both are described by
baseboard/devicetree.cb
BRANCH=dedede
BUG=b:230386474
TEST=on beadrix, verified by Realtek RTL8822CE can run suspend stress
test properly.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ib418eed57f07afaa6b397b42a057808eab142f7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64212
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
|
|
repalcement ---> replacement
Change-Id: I486170e89f75fa7c01c7322bb8db783fd4f61931
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64404
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Change-Id: Id4550842a31f89e7eb6c1543512794eeb5e24937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
To meet LTE's RF Specific Absorption Rate (SAR) certification, we add a
Semtech Smart Proximity Sensor (P-Sensor) SX9324. P-Sensor connects
EC of I2C 5 bus and GPIO D22, D23, as well as, SoC of GPIO E11, refer
to mainboard schematic.
BUG=b:213549229
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: If172d13aa62503547227adf91f049ea50b948888
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63652
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update DPTF Policy and temperature sensor values from thermal team.
BRANCH=dedede
BUG=b:204229229
TEST=on beadrix, verified by FW_NAME=beadrix emerge-dedede coreboot.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I34c1298dc8412121f8688842bb8d69d7fafa46f6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63824
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Revert CdClock setting and use default value 0xff.
Previous problem was fixed by Jasperlake FSP in version 1.3.09.31,
so we can use the original CdClock setting in baseboard.
BUG=b:206557434
BRANCH=dedede
TEST="Built and verified on magolor platform to confirm FSP solution works"
Cq-Depend: chrome-internal:4662167
Change-Id: I50d65e0caaf8f3f074322cff5bbdc68bdb1bbf78
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63808
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Found using:
diff <(git grep -l '#include <boardid.h>' -- src/) <(git grep -l 'UNDEFINED_STRAPPING_ID\|BOARD_ID_UNKNOWN\|BOARD_ID_INIT\|board_id(\|ram_code(\|sku_id(' -- src/) |grep "<"
Change-Id: I2611be41e8730a9b189b1b0aa3fe62be0757b371
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <martinroth@google.com>
|
|
Break TPM related Kconfig into the following dimensions:
TPM transport support:
config CRB_TPM
config I2C_TPM
config SPI_TPM
config MEMORY_MAPPED_TPM (new)
TPM brand, not defining any of these is valid, and result in "generic" support:
config TPM_ATMEL (new)
config TPM_GOOGLE (new)
config TPM_GOOGLE_CR50 (new, implies TPM_GOOGLE)
config TPM_GOOGLE_TI50 (new to be used later, implies TPM_GOOGLE)
What protocol the TPM chip supports:
config MAINBOARD_HAS_TPM1
config MAINBOARD_HAS_TPM2
What the user chooses to compile (restricted by the above):
config NO_TPM
config TPM1
config TPM2
The following Kconfigs will be replaced as indicated:
config TPM_CR50 -> TPM_GOOGLE
config MAINBOARD_HAS_CRB_TPM -> CRB_TPM
config MAINBOARD_HAS_I2C_TPM_ATMEL -> I2C_TPM && TPM_ATMEL
config MAINBOARD_HAS_I2C_TPM_CR50 -> I2C_TPM && TPM_GOOGLE
config MAINBOARD_HAS_I2C_TPM_GENERIC -> I2C_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_LPC_TPM -> MEMORY_MAPPED_TPM
config MAINBOARD_HAS_SPI_TPM -> SPI_TPM && !TPM_GOOGLE && !TPM_ATMEL
config MAINBOARD_HAS_SPI_TPM_CR50 -> SPI_TPM && TPM_GOOGLE
Signed-off-by: Jes B. Klinke <jbk@chromium.org>
Change-Id: I4656b2b90363b8dfd008dc281ad591862fe2cc9e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Add FW_CONFIG probe for absent ANPEC APW8738BQBI IC on kracko.
BUG=b:223687184
TEST=emerge-dedede coreboot
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Change-Id: Ib12265591e679e6b9ed34299f1256db05147eaef
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add FW_CONFIG probe for absent ANPEC APW8738BQBI IC on drawcia.
BUG=b:223687184
TEST=emerge-dedede coreboot
Change-Id: I683049e9d2b10fc9455ef782ce798f1c453073bc
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63110
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Add FW_CONFIG probe for absent ANPEC APW8738BQBI IC on lantis.
BUG=b:223687184
TEST=emerge-dedede coreboot
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Change-Id: I3d8eec1d2f962d42f3be225eef8498e8b722aace
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This should no longer be needed because the ASL has been fixed.
Change-Id: I4d1500217bef54fa3d2be397e5e2a155da3f965d
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63525
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I88406fa1b54312616e6717af3d924436dc4ff1a6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58899
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
consumption
To achieve low power consumption, we disable unused PCIe and SATA
pins at beadrix/overridetree.cb according to baseboard/devicetree.cb
and mainboard schematic. Original measured beadrix board's power
consumption is about 250 mW. After we disable unused PCIe and SATA
pins, as well as, enable the other low power MUX CL (3487086: USB
MUX: Update low power mode of MUX anx7447 used as MUX only |
https://chromium-review.googlesource.com/c/chromiumos/platform/ec/
+/3487086), the measured power consumption achieves about 110 ~ 116
mW, as well as, meets Google battery life for 14 days in the suspend
state and Intel low power consumption about 116 mW.
BRANCH=dedede
BUG=b:204882915
TEST=on beadrix, measured power consumption meets Intel power
consumption.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I79ec524c5ce8f2a79da4aeba084786fb9dac17af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62776
Reviewed-by: Teddy Shih <teddyshihau@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The only purpose of mainboard_chromeos_acpi_generate()
was to pass cros_gpio array for ACPI \\OIPG package
generation.
Promote variant_cros_gpio() from baseboards to ChromeOS
declaration.
Change-Id: I5c2ac1dcea35f1f00dea401528404bc6ca0ab53c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58897
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Enable/disable LTE function based on LTE field of FW_CONFIG.
1. GPIO control
2. USB port setting
BUG=b:213582491
BRANCH=dedede
TEST=FW_NAME=beadrix emerge-dedede coreboot
Change-Id: Icea44992e2e3195d1fd9a888f5ce4650f82280bb
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62801
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The touchscreen slave address for landrid is 0x10 same as lantis, so we use SSFC to switch touchscreen controller.
BUG=b:222976965
TEST=emerge-dedede coreboot
Change-Id: I23d3de5e45aa2876c1590a1e09679d652a3f2906
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add wifi sar for galnat/galnat360
Use SKU ID to load wifi table.
Each Project and SKU ID correspond as below
galtic (sku id:0x120000)
galith (sku id:0x130000)
galnat (sku id:0x140000)*
gallop (sku id:0x150000)
galtic360 (sku id:0x260000)
galith360 (sku id:0x270000)
galnat360 (sku id:0x2B0000)*
BUG=b:222008376
TEST=emerge-dedede coreboot chromeos-bootimage \
coreboot-private-files-baseboard-dedede
verify the SAR table is correct in each project
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I868a7416a002732736cabea48ce80548ea75e517
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62704
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
For galnat platform, support 2nd ELAN touchscreen via SSFC.
Define FW_CONFIG bits 39 - 40 (SSFC bits 7-8)
for touchscreen controller switch.
BUG=b:221002826
TEST=touch screen is functional.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Id3501205b147c9dc3c96ce8381a3e7492ae8258e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62315
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Reviewed-by: Ivan Chen <yulunchen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update PL1, PL2, and temperature sensor values from thermal team,
as well as, we remove unused temperature sensors according to
baseboard/devicetree.cb and mainboard schematic. After we check
DTT setting, the thermal and performance test pass.
BRANCH=dedede
BUG=b:204229229
TEST=on beadrix, run following commands:
localhost /tmp # cat /sys/class/thermal/thermal_zone*/type
x86_pkg_temp
INT3400 Thermal
TSR0
TSR1
TCPU
localhost /tmp # cat /sys/class/thermal/thermal_zone*/temp
45000
20000
32800
32800
39000
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibc59c4aa431f600158e744f5bbdc6d59a07a1ef3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62729
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Mainboards accessing the cr50 over an I2C bus may want to reuse some of
the same firmware version and BOARD_CFG logic, therefore refactor this
logic out into a bus-agnostic file, drivers/tpm/cr50.c. This file uses
the new tis_vendor_read/write() functions in order to access the cr50
regardless of the bus which is physically used. In order to leave SPI
devices intact, the tis_vendor_* functions are added to the SPI driver.
BUG=b:202246591
TEST=boot to OS on google/dratini, see the same FW version and board_cfg
console prints as before the change.
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Change-Id: Ie68618cbe026a2b9221f93d0fe41d0b2054e8091
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61977
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add wifi sar for pasara
BUG=b:216411442
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: Ida475307c8448c5c2758c289da7708484bcb89e3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds LTE power off sequence for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=FW_NAME=beadrix emerge-dedede coreboot
Change-Id: I11370bf69438465d2230e2633044ba42685a152b
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61329
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds LTE modem for beadrix.
BUG=b:204882915
BRANCH=dedede
TEST=Build and boot beadrix, check with command modem status
Change-Id: I7acb88634478ff486810b2c3fc14d6739c3268e1
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61328
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add wifi sar for magneto.
Due to fw-config cannot distinguish between magolor and magneto.
Using sku_id to decide to load magneto custom wifi sar.
BUG=b:208261420
TEST= emerge-dedede coreboot
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: I77f141372ba8e7b8f5849b00e115ad8bb1e7ca00
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Add supported memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Samsung K4U6E3S4AA-MGCR
BUG=b:214460184
TEST=emerge-dedede coreboot
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ief75fcb7a8f1c25feaf05b1535a9528a351b23b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61105
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Galtic has a rare stability issue.
The symptom is display black screen while switching to secure mode,
normally it will occurred at the last step of factory side
and it'll follow by some specific SOCs.
Slowing the initial core display clock frequency down to 172.8 MHz
as per Intel recommend for short term solution for Gal series.
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for Galtic.
BUG=b:206557434
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: Ic059ab306f80a6d01f4b0a380a3b767d3245478d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61103
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't unconditionally override `IGNORE_IASL_MISSING_DEPENDENCY`.
Change-Id: I02081d0f04be4af9cd765aa3b29295af40f9ca99
Fixes: commit 28fa297901ffd158631cfc9f562f38119eff628e
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61477
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
IASL compiler check for usage of _CRS, _DIS, _PRS, and _SRS objects:
1) If _PRS is present, must have _CRS and _SRS
2) If _SRS is present, must have _PRS (_PRS requires _CRS and _SRS)
3) If _DIS is present, must have _SRS (_SRS requires _PRS, _PRS requires _CRS and _SRS)
4) If _SRS is present, probably should have a _DIS (Remark only)
IASL will issue a warning for each missing dependency.
Ignore this warnings for existing ASL code and issue a message when the build is complete.
Change-Id: I28b437194f08232727623009372327fec15215dd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59880
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
Drawcia's MIPI camera sensor and VCM both share the same reset GPIO
from the PCH. The current power sequence does not take this into
account, and this leads to an unbalanced ref count of the reset GPIO,
which can cause one or the other of the devices to reset unexpectedly.
This patch corrects that by explicitly sequencing the reset GPIO for
both devices, which the builtin refcounting of this driver will
automatically handle.
BUG=b:214665783
TEST=Build, boot to OS and check VCM once camera stream off
Signed-off-by: Varshit B Pandya <varshit.b.pandya@intel.com>
Change-Id: Ib676fd1f43dbd9cf75e4aff01baab4a4bb4e2a89
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When using the default initial core display clock frequency, Metaknight
has a rare stability issue where the startup of Chrome OS in secure mode
may hang. Slowing the initial core display clock frequency down to
172.8 MHz as per Intel recommendation avoids this problem.
The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0
(172.8 MHz) for metaknight.
BUG=None
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Change-Id: I987277fec2656fe6f10827bc6685d3d04093235e
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Present the Semtech SX9360 SAR sensor that protects the LTE antenna.
The sensor is connected to i2c bus I2C1.
BUG=b:194318328
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Signed-off-by: Gwendal Grignou <gwendal@chromium.org>
Change-Id: I9feef9d132c60738bafb22ceb7d3468c798fab9b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59609
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When using the default initial core display clock frequency (648MHz),
Jasper Lake board might have a rare stability issue where the startup
of Chrome OS in secure mode may hang during re-initializing display in
kernel graphic driver.
Bugzzy didn't show this problem so far, but Intel recommends slowing
the initial core display clock frequency down to 172.8 MHz to prevent
this potential problem.
Depend on CL: https://review.coreboot.org/c/coreboot/+/60009
The CdClock=0xff is set in dedede baseboard, and we overwrite it as 0x0
(172.8 MHz) for bugzzy.
BUG=None
BRANCH=dedede
TEST=Build firmware and check the DUTs can boot up in secure mode well.
Change-Id: I592b2d7c814881074bd2fef9906f2450326c1fcd
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/61022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit bcd7873ea80be0ee576a10e6a11b7dcf8294ffb5.
Reason for revert: It makes beadrix can't boot to os without depthcharge change. The depthcharge change related with fw_config and will effect other variants.
================ error log ================
...
Starting depthcharge on Beadrix...
src/vboot/util/flag.c:50 flag_install(): Gpio already set up for flag 5.
===========================================
BUG=b:204882915
BRANCH=None
TEST=Build and boot into OS.
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Id5e76fc78a56d30caf9f805a8a430f176a653bbe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60849
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds memory part used by variant beadrix to
mem_part_used.txt and generates DRAM ID allocated to the part.
BUG=b:204882915, b:210123929
BRANCH=None
TEST=Run part_id_gen to generate SPD id
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ibff150bb4e742f32641da661cfca6594d18c52e9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60242
Reviewed-by: Raymond Chung <raymondchung@ami.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
List of changes:
1. Drop `HeciEnabled` from dt and dt chip configuration.
2. Replace all logic that disables HECI1 based on the `HeciEnabled`
chip config with `DISABLE_HECI1_AT_PRE_BOOT` config.
Mainboards that choose to make HECI1 enable during boot don't override
`heci1 disable` config.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib9fb554c8f3cfd1e91bbcd1977905e1321db0802
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Override GPIO pad configurations based on the beadrix's schematic.
BUG=b:204882915
BRANCH=None
TEST=Built test coreboot image
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I53fc8088ff8ebb2790ac8cd68186cf9de908b414
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60245
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Based on the beadrix's schematic, generate memory settings.
BUG=b:204882915, b:210123929
BRANCH=None
TEST=Built test coreboot image
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I935581fbf21be4820b03a608ea5bd60b1c000baa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60244
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Found using:
diff <(git grep -l '#include <console/console.h>' -- src/) <(git grep -l 'console_time_report\|console_time_get_and_reset\|do_putchar\|vprintk\|printk\|console_log_level\|console_init\|get_log_level\|CONSOLE_ENABLE\|get_console_loglevel\|die_notify\|die_with_post_code\|die\|arch_post_code\|mainboard_post\|post_code\|RAM_SPEW\|RAM_DEBUG\|BIOS_EMERG\|BIOS_ALERT\|BIOS_CRIT\|BIOS_ERR\|BIOS_WARNING\|BIOS_NOTICE\|BIOS_INFO\|BIOS_DEBUG\|BIOS_SPEW\|BIOS_NEVER' -- src/) |grep "<"
Change-Id: I3a6a64273e3883942655272a544c41e90ef519fd
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60916
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add new sku id apply for bookem wifi sar table.
BUG=b:211705077
TEST=emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage
Signed-off-by: Stanley Wu <stanley1.wu@lcfc.corp-partner.google.com>
Change-Id: I1e5bac662fb44cf631ae1453068dec898b6e2607
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60399
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Touch screen IC couldn't wake up after rebind with current 120 ms delay
after reset since the HID would be activated after 200 ms from reset.
This change increases the reset_delay_ms for touch device to 200 ms to
wait for the touch HID to be ready.
BUG=b:204950000
BRANCH=dedede
TEST=Verified that TSP IC could wake up after rebind
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I34cbc82e2d691266389d498e77d8389cdee23efe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60273
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add supported memory parts in the mem_parts_used.txt and generate the
SPD ID for Samsung K4U6E3S4AA-MGCR.
BUG=b:211950312
TEST=emerge-dedede coreboot
Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com>
Change-Id: Ic436db8fe3ef6fb8379ec629b128c05c691ea6fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
|
|
Bugzzy uses panel-built-in touch screen, it needs to set panel power
and reset signal to high for touch screen to work.
On user mode, coreboot doesn't initialize graphics since there is no
screen display before OS. So we would add a WA to initialize required
signals on user mode. It takes under 30 ms delay on booting time.
BUG=b:205496327
BRANCH=dedede
TEST=Verified touch screen worked with test coreboot
and test touch screen 028D firmware
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Iaa4d16deb932f43ae1ab33ff5b4e74120ab670db
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60190
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
When using the default initial core display clock frequency, Magolor has
a rare stability issue where the startup of Chrome OS in secure mode may
hang. Slowing the initial core display clock frequency down to 172.8 MHz
as per Intel recommendation avoids this problem.
Depend on CL: https://review.coreboot.org/c/coreboot/+/60009
The CdClock=0xff is set in dedede baseboard,and we overwrite it as 0x0
(172.8 MHz) for magolor.
BUG=b:206557434
BRANCH=dedede
TEST=Build firmware and verify on fail DUTs.
Check the DUTs can boot up in secure mode well.
Change-Id: I5a0ad2bed79b37775184f0bd0a0ef024900cbe34
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60301
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Run the command below to fix all occurrences.
$ git grep -l 'ramstage\*/' | xargs sed -i 's,ramstage\*/,ramstage */,'
Change-Id: Ied155d325846fc0ef3e823e5708c6f74e3d7998f
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Remove chromeos_dsdt_generator() calls under mainboard, it
is possible to make the single call to fill \CNVS and
\OIPG without leveraging device operations.
Change-Id: Id79af96bb6c038d273ac9c4afc723437fc1f3fc9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Add the stylus field in fw_config.
Update devicetree and gpio to handle stylus pen detection.
BUG=b:167983049
TEST=Build firmware and check behavior as following:
1) Set the fw_config "bit4=1" for pen present:
Wake up from suspend when pen is removed from the garage.
Present the stylus menu when pen is removed from the garage.
2) Set the fw_config "bit4=0" for pen absent:
Wake up and present menu will not work when pen is removed
form the garage.
Change-Id: I62489bb289b18f9aa0823005224eda3ef5218e03
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60185
Reviewed-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove SD controller configurations based on the beadrix's schematic.
BUG=b:204882915
BRANCH=None
TEST=Built test coreboot image
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Iba6f5cbbe90d9307e5e8080d7063a1881acd7ed9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60266
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change adds internal USB camera into devicetree for beadrix.
BUG=b:204882915, b:210772511
BRANCH=None
TEST=Built and checked camera device existence with lsusb
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Iddc58c0d27d5da0fa4652f503f15ebb308be18c7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60252
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds ALC5682I audio codec and MAX98360A amplifier for beadrix.
BUG=b:204882915, b:210756131
BRANCH=None
TEST=Built and heared speaker sound on OS
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I6f12f71ec66acd420471ab9a7612b1821650ad54
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60250
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adds PIXA touchpad into devicetree for beadrix.
BUG=b:204882915, b:203113111
TEST=Built and verified touchpad function
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: I0b551554c69d52f0559ace4ad9c1335270dacea9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/60246
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add new memory parts in the mem_parts_used.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Samsung K4U6E3S4AB-MGCL
2. Hynix H54G46CYRBX267
BUG=b:203837656
BRANCH=dedede
TEST=FW_NAME=cret emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I03980858f89e56320ddff3a808110a5f1dd57784
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add new memory parts in the mem_list_variant.txt and generate the
SPD ID for the parts. The memory parts being added are:
1. Micron MT53E512M32D1NP-046 WT:B
2. Samsung K4U6E3S4AB-MGCL
3. Hynix H54G46CYRBX267
BUG=b:209889645
BRANCH=dedede
TEST=FW_NAME=madoo emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: I0b2f447a610a0a857e819ede257ac89cfd817018
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59991
Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
ALC5682-VD/ALC5682-VS use different kernel driver by different hid name.
Update hid name depending on the AUDIO_CODEC_SOURCE field of fw_config.
ALC5682-VD: _HID = "10EC5682"
ALC5682I-VS: _HID = "RTL5682"
BUG=b:206676530
TEST=build
Change-Id: Ie73dc376078c0836edd980e09629399c5cc19594
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59353
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
amplifier
Compatible headphone codec "ALC5682I-VS" and speaker amplifier "ALC1015Q-VB"
BUG=b:208912135
TEST=ALC5682I-VD and ALC1015Q-VB can work normally
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Id661280061ede3fbb63c962dee8fb18a2053ad66
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59865
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add new memory parts in memory_parts_used.txt and generate SPD id for
these parts:
Samsung K4U6E3S4AA-MGCL
BUG=b:204014463
TEST=run part_id_gen to generate SPD id
Change-Id: Icb0f211508450b16b2e5d214ae6adc9852718a59
Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59642
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Create the beadrix variant of the waddledee reference board by
copying the template files to a new directory named for the variant.
(Auto-Generated by create_coreboot_variant.sh version 4.5.0).
BUG=b:204882915
BRANCH=None
TEST=util/abuild/abuild -p none -t google/dedede -x -a
make sure the build includes GOOGLE_BEADRIX
Signed-off-by: Teddy Shih <teddyshih@ami.corp-partner.google.com>
Change-Id: Ie08cbc19967eca8ba31ea3203e71c4e1fef044d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59302
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=b:207307897
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot-private-files-baseboard-dedede coreboot chromeos-bootimage.
Change-Id: Ib1682cdafe1b6ed7cc0cf23624f83d2e5bbfb92e
Signed-off-by: Wizard Shen <shenhu5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59544
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: zanxi chen <chenzanxi@huaqin.corp-partner.google.com>
|
|
Enable Acoustic noise mitigation for bugzzy and set slew rate to 1/8
which is calibrated value for the board.
BUG=b:207046230
BRANCH=dedede
TEST=build firmware to UPD and Acoustic noise test
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Id249a143efb9bce70f48fb466fed42e766a10937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59480
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This reverts commit adb393bdd6cd6734fa2672bd174aca4588a68016.
This relands commit 6260bf712a836762b18d80082505e981e040f4bc.
Reason for revert:
The original CL did not handle some devices correctly.
With the fixes:
* commit 36721a4 (mb/google/brya: Add GPIO_IN_RW to all variants'
early GPIO tables)
* commit 3bfe46c (mb/google/guybrush: Add GPIO EC in RW to early
GPIO tables)
* commit 3a30cf9 (mb/google/guybrush: Build chromeos.c in verstage
This CL also fix the following platforms:
* Change to always trusted: cyan.
* Add to early GPIO table: dedede, eve, fizz, glados, hatch, octopus,
poppy, reef, volteer.
* Add to both Makefile and early GPIO table: zork.
For mb/intel:
* adlrvp: Add support for get_ec_is_trusted().
* glkrvp: Add support for get_ec_is_trusted() with always trusted.
* kblrvp: Add support for get_ec_is_trusted() with always trusted.
* kunimitsu: Add support for get_ec_is_trusted() and initialize it as
early GPIO.
* shadowmountain: Add support for get_ec_is_trusted() and initialize
it as early GPIO.
* tglrvp: Add support for get_ec_is_trusted() with always trusted.
For qemu-q35: Add support for get_ec_is_trusted() with always trusted.
We could attempt another land.
Change-Id: I66b8b99d6e6bf259b18573f9f6010f9254357bf9
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58253
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add wifi sar for galtic/galtic360/galith360
Using convertible mode of SKU ID to load wifi table.
Each Project and SKU ID correspond as below
galtic (sku id:0x120000)
galith (sku id:0x130000)
gallop (sku id:0x150000)
galtic360 (sku id:0x260000)
galith360 (sku id:0x270000)
BUG=b:203741126
TEST=emerge-dedede coreboot chromeos-bootimage \
coreboot-private-files-baseboard-dedede
verify the SAR table is correct in each project
Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com>
Change-Id: If4203d176dd717fa62c88d9b4fab8a53847213fe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58734
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Marco Chen <marcochen@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
It's commented in <types.h> that it shall provide <commonlib/helpers.h>.
Fix for ARRAY_SIZE() in bulk, followup works will reduce the number
of other includes these files have.
Change-Id: I2572aaa2cf4254f0dea6698cba627de12725200f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58996
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Probe the fw_config for RT1015 speaker amplifier operation mode and
enable it accordingly in the device tree.
BUG=none
BRANCH=dedede
TEST=build pass
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Change-Id: I2de1487b7f4767e9ba6432174c39feeb25f9534c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
This change adjusts all I2C speed to lower then 400KHz. The rise_time_ns
and fall_time_ns values for each port are capured by a scope.
BUG=None
BRANCH=dedede
TEST=built and verified adjusted I2C speed < 400KHz
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I9504608dd8d9a5f5a3848ef34691557942c21023
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58965
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add ELAN touchscreen support for magneto.
BUG=b:203122673
TEST=Build and verify that touchscreen works.
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Change-Id: Ie86692901113e952c597fcfc6c58e7ee0fc172fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update charger performance control table of DPTF for bugzzy.
Since the EC change chromium:197776876 modified maximum charging current
to reduce skin temperature, this change adjusts the charging performance
table with the modified value.
BUG=b:197776876
BRANCH=dedede
TEST=emerge-dedede coreboot
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: I33e176fcf5d380b315ff352c6c65af3b8b93c4b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
BUG=None
BRANCH=dedede
TEST=enable CHROMEOS_WIFI_SAR in config of coreboot,
emerge-dedede coreboot chromeos-bootimage
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Change-Id: Ie967ef7fbc19886c631e634a0b0c3f2cf1e490af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58845
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Change-Id: Ibbdd589119bbccd3516737c8ee9f90c4bef17c1e
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58923
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Change-Id: I9e7200d60db4333551e34a615433fa21c3135db6
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
All of these names came from public sources.
Signed-off-by: Martin Roth <martin@coreboot.org>
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Change-Id: I1ed9cc0c1ff63dc415e0cc63fa9d2dcd429a093b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Compatible headphone codec "Realtek ALC5682I-VD" and "ALC5682I-VS"
BUG=b:202463494
BRANCH=dedede
TEST=ALC5682I-VD or VS audio codec can work normally
Signed-off-by: Zhi Li <lizhi7@huaqin.corp-partner.google.com>
Change-Id: Ib808ddadef1029d3f06eb2d68164243c386d4905
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58643
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|