summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya
AgeCommit message (Collapse)Author
2024-11-21mb/google/nissa/var/glassway: Support HDMI FeatureDaniel Peng
1. Add DB_HDMI_LTE 5 on DB_USB fw_config . 2. Due to refer Nivviks, used GPP_A20/GPP_E20/GPP_E21 as default to set for NF1. Moreover, set to disable HDMI to NC when fw_config not for DB_HDMI_LTE. 3. Set related DB_USB fields to probe correct devices. BUG=b:369509276 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ic5e3b596ff3681f79f31c262e9e59d163e471e3c Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-21mb/google/nissa/var/telith: Add 6W and 15W power limit parametersRui Zhou
The power limit parameters were defined for 378775630#comment5 by the power team. BUG=b:378775630 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I069869fa01dc157cf2544e72468f43ce1bb64035 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85209 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com>
2024-11-21mb/google/nissa/var/rull: add RAM ID MT62F1G32D2DS-023 WT:BRui Zhou
Add RAM ID for DDR MICRON MT62F1G32D2DS-023 WT:B BUG=b:378821948 BRANCH=None TEST=boot to kernel success Change-Id: I22e00cffaf6007c64d0c9ffa5f5dde528e3d8952 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85202 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-11-21tree: Remove unused <bootstate.h>Elyes Haouas
Remove "include <bootstate.h>" when it is not used. Change-Id: Ic27acf9f8dfbbccb8f48a139032b1463e7185030 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85216 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-19mb/google/brya/var/orisa: Update Type C DisplayPort HPD ConfigurationVarun Upadhyay
This change removes the GPIO configuration for Type C DP HPD, as the Type C port does not require HPD setup. BUG=b:366156678 TEST=Build and boot google/orisa. Test Type C port for external usb and DisplayPort functionality. Change-Id: I59ec5c19dbbd053bda25f4260321220524d785b3 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85181 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-19mb/google/brya/var/trulo: Update Type C DisplayPort HPD ConfigurationVarun Upadhyay
This change removes the GPIO configuration for Type C DP HPD, as the Type C port does not require HPD setup. BUG=b:366156678 TEST=Build and boot google/trulo. Test Type C port for external usb and DisplayPort functionality. Change-Id: Iad602c9a15c65d37a37d06d486843f45e341b6bc Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85180 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-18mb/google/nissa/var/rull: add RAM ID H58G56BK8BX068Rui Zhou
Add RAM ID for DDR Hynix H58G56BK8BX068 BUG=b:378821948 BRANCH=None TEST=boot to kernel success Change-Id: I4c4ad191a5e9703ee0f3bed150c816bfb098daf5 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85117 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-11-18mb/google/trulo: Fix invalid GPE route configurationKapil Porwal
GPE route for GPE0_DW0 was not being programmed (i.e. 0) which made it route to GPP_B since a value of 0 means GPP_B. GPE route for GPE0_DW1 is also being programmed to GPP_B which makes the overall configuration invalid. The fix is to program the GPE0_DW0 route to a GPIO group which is not already being used for GPE0_DW1 & GPE0_DW2 i.e. GPP_A. Additionally, the common GPE route configuration is moved to baseboard. BUG=b:378455259 TEST=Verify wake from S0ix when charger is connected Change-Id: I674cf7db160b6bc1ec3d620f9c99ea91041c48bb Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85157 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-15mb/google/nissa/var/telith: Add Fn key scancodeKun Liu
The Fn key on telith emits a scancode of 94 (0x5e). BUG=b:372506691 TEST=Flash telith, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: Ib69af9a8448312b275de46f9c835f8a9d592312a Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85045 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-15mb/google/nissa/var/telith: Add 6W and 15W DPTF parametersKun Liu
The DPTF parameters were defined by the thermal team. Based on thermal table in 377955793#comment2 BUG=b:377955793 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I7cb44a707d7a87f5caaf259b069a21826f5c0a2e Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-13vc/google: Refactor config to set Fn key scancodeKapil Porwal
Create a new config option to indicate that a board has Google Strauss keyboard. The scan code for Fn key will be set to 94 if the new config is selected. Previously each board was setting the integer config option for Fn key scan code which was not scalable. The new option is a bool and can be easily selected by different boards. BUG=none TEST=Verify coreboot.config before and after this change. Change-Id: I2b5d54879d415e4403b2d7948432bb06ab983b86 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85109 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-13mb/google/nissa/var/rull: when using pcie wifi7, turn off CNVI BTRui Zhou
When we use PCIE wifi7, CNVI BT and BT offload should be turned off. BUG=b:378053901 BRANCH=None TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I0adc446220051da59560c9a59d6f334b3a11ac7b Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85044 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-11-11mb/google/nissa/var/rull: Add ELAN touchscreen to devicetreeRui Zhou
Add Elan touchscreen override devicetree for rull based on the latest schematic NB7559_MB_SCH_V1_2024_1010.pdf. BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. touchpanel function is normal and 'evtest' command displays the touch point Change-Id: Ie7f6dce0175c2940abfa14c4e407414912063112 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85015 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-11mb/google/var/riven: Optimize the stop delay for touchsreenKapil Porwal
Reduce stop delay for touchscreen based on the latest spec (EKTH6915 Product Spec_V1.0). This will optimize the touch response time to keep the S0ix resume time under 500ms. BUG=b:378012214 TEST=Verify improvement in resume time on Riven. Change-Id: Id7dcbc393bfae9bb62b5700bb9042a543152e968 Signed-off-by: Kapil Porwal <kapilporwal@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85039 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-10mb/google/*: Explicitly include static.h for DEV_PTRNicholas Chin
As per commit 05a13e7ed9b9 ("sconfig: Move (WEAK_)DEV_PTR from device.h to static.h"), sources that require access to devicetree static devices should directly include static.h. This allows static.h to be removed from device.h, eliminating unnecessary dependencies on the devicetree for objects that only need the device types and function declarations. The DEV_PTR macro resolves to names declared in static_devices.h, which is then included in static.h, so include the header whenever the macro is used. Change-Id: I05662e601af00866b7f26f4c6c6794b491bf676e Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84678 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-08mb/google/nissa/var/riven: Configure Acoustic noise mitigationDavid Wu
Follow the power team’s recommendation: - Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_4 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=b:376165743 TEST=built firmware and verified by power team, the acoustic noise can be improved a lot. Change-Id: Ia71985ef21d634763fc5ae22e4f611f7f5e9652a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-11-07mb/google/nissa/var/rull: Add Fn key scancodeRui Zhou
The Fn key on rull emits a scancode of 94 (0x5e). BUG=b:372211281 TEST=Flash rull, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: Idb02d7013fa78233abff556bc6fa1d224c434338 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85014 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-07mb/google/nissa/var/rull: Change padbased_override to rtd3 of wifiRui Zhou
The previous method made cnvi wifi6 configuration cumbersome and unusable. And delete unused pins. We abandoned the fw_config judgment method and changed to the better rtd3. BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. wifi7&wifi6 function is normal Change-Id: Ia95dc9f6b707db63840de9b15b38bdaea48ea192 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/85000 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-11-07mb/google/nissa/var/rull: add touchpad init config of Synaptics&PIXARTRui Zhou
Add Synaptics&PIXART init cpnfig, enable touchpad function BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. touchpad function normal Change-Id: Iacf09cd46d4a97fb79f91043c84452f76689462f Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84999 Reviewed-by: Lei Cao <caolei6@huaqin.corp-partner.google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-07mb/google/nissa/var/rull: add ssd timing and modify ssd GPIO pins of rtd3Rui Zhou
The previous GPIO config will cause the SSD device to not be recognized. Based on schematics NB7559_MB_SCH_V1_2024_1010.pdf. So we adjust the position of the enable and reset pins. BUG=b:374629673 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. power on proto board successfully Change-Id: Idb36f67206450612655cb3efd3cce240475ef3ab Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-11-06mb/google/nissa/var/glassway: Add initial LTE related settingsDaniel Peng
1. Add DB_1C_LTE 4 on DB_USB fw_config. 2. Implement WWAN power sequencing. 3. Disable LTE-related GPIOs based on fw_config. 4. Add I2C SX9324 (P-sensor) support. Refer Schematic file: CA31AC_R10_MB_SUB_240903A_P.pdf BUG=b:374666995 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Confirm the device node i2c-STH9324:00 created correctly, and command for # i2cdump -f -y 11 0x28 is workable. Change-Id: Ida56ff338d82f48aef419a65830a3380c83123d5 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84925 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-11-05mb/google/nissa/var/glassway: Add touch screen ILIT2901 supportDaniel Peng
1. Extend 1 bit [34] for the TOUCHSCREEN_SOURCE. SSFC range for TOUCHSCREEN_SOURCE is bit[32:34]. 2. Touchscreen panel: MUTTO A153728S1Y, and set TOUCHSCREEN_ILIT2901 to value "4" 3. Datasheet: #153728S1V1.0 SPEC_20240923.pdf BUG=b:375986645 BRANCH=firmware-nissa-15217.B TEST=1. emerge-nissa coreboot chromeos-bootimage 2. Confirm command evtest and touchscreen function is workable. Change-Id: I6e13c948edca5a894e1a00a1954f0f88c4a079cf Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84894 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-11-01mb/google/brya/var/banshee: select SOC_INTEL_RAPTORLAKEIan Feng
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers for FSP as banshee is using a converged firmware image. This effort also helps to save banshee boot time by 80-100ms as RPL FSP is better optimized. Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which saves 10ms of the boot time. BUG=b:358254132 TEST=Able to build and boot google/banshee. cold boot time w/o this CL ``` Total Time: 1,399,888 ``` cold boot time w/ this CL ``` Total Time: 1,295,334 ``` Change-Id: If22e07a4c1b35fe1d060ca523743c6c503937287 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2024-11-01mb/google/nissa/var/riven: Increase the VccIn Aux Imon IccMax to 30ADavid Wu
From power team's recommendation, increase the VccIn Aux Imon IccMax to 30A to meet HW settings. BUG=b:376306118 TEST=Build firmware and check the value is changing as expected. Paste the firmware log. [SPEW ] VccInAuxImonIccImax= 0x78 [SPEW ] (MAILBOX) VccInAuxImonIccImax = 120 (1/4 Amp) [INFO ] Override VccInAuxImonIccImax = 120 Change-Id: I71020c2f631cb517a52d4bb65e35277eb731ced7 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Zhuohao Lee <zhuohao@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-31mb/google/nissa/var/teliks: Match VBT with SSFCzengqinghong
We want to configure different VBT timings for panels of different sizes and distinguish them through SSFC. We select the reserved bit 6 of SSFC as the flag bit. When using a 12-inch panel, set this bit to 0; when using an 11-inch panel, set this bit to 1. Without splitting, the platform_BootPerf test will fail. BUG=b:374428465 TEST= 1. can match VBT with SSFC -When SSFC is set to 0x40: $ cat /sys/firmware/log | grep vbt Bit 6 of SSFC is 1, use vbt-teliks_panel_11_inch.bin CBFS: Found 'vbt-teliks_panel_11_inch.bin' @0x1c6140 size 0x50f in mcache @0x76adda14 -When SSFC is set to 0x0: $ cat /sys/firmware/log | grep vbt Bit 6 of SSFC is 0, use vbt-teliks.bin CBFS: Found 'vbt-teliks.bin' @0x1c5bc0 size 0x50e in mcache @0x76add9b0 2. can pass platform_BootPerf test The platform_BootPerf time measured for all SKUs is less than 1.55s. Change-Id: Ia8fb45aede5ead4826d983760506c366a70643ee Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84871 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-28mb/google/nissa/var/telith: Modify touchscreen form ILITEK to ELANKun Liu
When creating variant, it was copied from teliks, and according to the requirements of telith project, update the override devicetree to use ELAN touchscreen. BUG=b:373510302 BRANCH=None TEST=1. emerge-nissa coreboot chromeos-bootimage 2. power on proto board successfully 3. touchscreen is functional Change-Id: If0da85a38f3a68b6f50cfd096a628174b313fcc9 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84865 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-28mb/google/brya: Create rull variantRui Zhou
Create the rull variant of the nissa reference board by copying the template files to a new directory named for the variant. And based on schematics NB7559_MB_SCH_V1_2024_1010.pdf update devicetree settings. (Auto-Generated by create_coreboot_variant.sh version 4.5.0) BUG=b:374673463 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_RULL Change-Id: If48273f3e9db69507b41ea0313916d94ecabe309 Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84828 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-10-24mb/google/brya/var/nova: Disable Thunderbolt deviceKenneth Chan
Nova doesn't support thunderbolt, so disable the TBT setting. Enabling TBT also causes the system to fail to enter S3/S5 state. S5 fail log: 24-10-21 20:23:34.610 Port 80 writes: 24-10-21 20:23:34.610 9a02 9a32 9a14 9c15 9c18 9c19 9c20 9c22 9c25 9c28 9c3f 9c43 9c44 9c4f 9c23 9a50 9a5f 9a33 9b40 9b41 24-10-21 20:23:34.620 9b42 9b47 9c80 9c81 9c82 9c83 9a61 9a63 9a03 9a04 9a05 9a06 9a07 9a0f 9a65 9a64 9c6a 9c71 9c7f 99 24-10-21 20:23:34.626 a0 a1 72 24 25 24 25 55 24 25 55 55 73 74 75 75 75 75 75 75 24-10-21 20:23:34.633 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 24-10-21 20:23:34.639 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 24-10-21 20:23:34.643 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 75 76 77 79 9c 24-10-21 20:23:34.649 93 7a fe 7b f8 aa ab 96 <--new powerinfo 24-10-21 20:23:59.424 powerinfo 24-10-21 20:23:59.424 power state 4 = S0, in 0x00ff The correct power state for S5 is G3, not S0. BUG=b:374213121 TEST=emerge-constitution coreboot chromeos-bootimage. Booting to OS and verify S3/S5 by EC log. Change-Id: I2bae8ae396f001dbef3322e361f9563792e1a1ef Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84838 Reviewed-by: Pranava Y N <pranavayn@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-24mb/google/nissa/var/glassway: Add touch screen ELAN9004 supportDaniel Peng
1. 2nd touch panel: INX N140HCN-EA1 C5 2. Set TOUCHSCREEN_ELAN9004 to value "3" BUG=b:374899470 BRANCH=firmware-nissa-15217.B TEST=1. emerge-nissa coreboot chromeos-bootimage 2. Confirm command evtest and touchscreen function is workable. Change-Id: Ic25bd46c7cb7948e920de4fd44edb87f20cf01c4 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84834 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-10-24mb/google/nissa/var/glassway: Support Samsung K3LKBKB0BM-MGCPDaniel Peng
Add the new memory support: Samsung K3LKBKB0BM-MGCP BUG=b:374880584 BRANCH=firmware-nissa-15217.B TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\ part_id_gen.go ADL lp5 \ src/mainboard/google/brya/variants/glassway/memory/ \ src/mainboard/google/brya/variants/glassway/memory/\ mem_parts_used.txt" Change-Id: I47d9fd64fa841a2cf60930c5e319a9130019b0a5 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84831 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com>
2024-10-17mb/google/nissa/var/glassway: Add convertible and clamshell WIFI SAR ↵Daniel Peng
FW_CONFIG ids Based on Gallida360 design, we add two new options for WIFI_SAR_ID: - WIFI_SAR_ID_INTEL_CONVERTIBLE 2 - WIFI_SAR_ID_INTEL_CLAMSHELL 3 BUG=b:372354703 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I1b58c4f572d4dbcb269d38485664ddc51e378e5e Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84779 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-16mb/google/brya: Create telith variantKun Liu
Create the telith variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0) BUG=372506691 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TELITH Change-Id: I4971b9691d3dd293ca640795967c36472afef9c9 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84759 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-10-16mb/google/brya/var/glassway: Add Stylus FunctionDaniel Peng
1. Add STYLUS fw_config setting. 2. Enable stylus device settings. 3. Disable the stylus GPIO pins based on fw_config. BUG=b:364798563 BRANCH=firmware-nissa-15217.B TEST=1. emerge-nissa coreboot 2. Confirm command evtest for stylus PRP0001:00 and workable. Change-Id: Ifa8555eed1c31e9342a50a735fc618106f26d41a Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84713 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-10-14mb/google/nissa/var/sundance: Change touch panel and wwan gpio settingRoger Wang
In order to fit the specification, change gpio setting for touch panel and wwan. Change items: 1. wwan : Add WWAN_RST_L to 0. And we want WWAN_EN to pull high more early than WWAN_RST_L, so add WWAN_EN to 1 in romstage stage. 2. touch panel : First we add EN_PP3300_TCHSCR and USI_RST_L to 0 to init status. And we want EN_PP3300_TCHSCR to pull high more early than USI_RST_L so delete USI_RST_L pull high in romstage. BUG=b:357764679 Test=emerge-nissa coreboot Change-Id: I0a07ea8e2bf3d165dcebd89c4c564f157d9d4846 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84668 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-10-09mb/google/brya/var/glassway: Add WFC FunctionDaniel_Peng
1.Add WFC fw_config setting. 2.Used USB2 Port7 for WFC. BUG=b:365184481 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Ie5dcf5ed8f72a4bdf4c2c7fc63bf94dc7b869eef Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84685 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-10-07mb/*: Explicitly include static.h for config_of_socNicholas Chin
As per commit 865173153760 ("sconfig: Move config_of_soc from device.h to static.h"), sources that require access to the devicetree should directly include static.h so that it can be removed from device.h, eliminating unnecessary dependencies on static.h for files that only need the types and function declarations in device.h. Change-Id: Ia793666fda47678764fd33891fddb4aecf207bd4 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-10-07mb/google/brya/var/glassway: Add audio codec ALC5650Daniel_Peng
1.Add AUDIO fw_config setting. 2.Add audio codec ALC5650 related settings for Gallida360 project. BUG=b:364798053 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I3761ca6d4cad18c74f5e1a056f0cb465dc4ac3ea Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84655 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-30mb/google/brya/var/bujia: Add Wifi SAR for bujiaShon
Add wifi sar for bujia. BUG=b:345364452 BRANCH=firmware-brya-14505.B TEST=emerge-brask coreboot-private-files-baseboard-brya coreboot chromeos-bootimage Change-Id: I5a67f3723a9dc33793a5cd95f9a3a2596c3c1fc6 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84501 Reviewed-by: Jayvik Desai <jayvik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-09-30mb/google/nissa/var/riven: Add 2 memory parts and generate DRAM IDsDavid Wu
Add two new memory parts 1. K3KL8L80CM-MGCT (Samsung) 2. H58G56BK8BX068 (Hynix) BUG=None TEST=Run part_id_gen tool and check the generated files. Change-Id: I557b359d9e639f6c3fac4239eb28aa7e0bed4c0e Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84529 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-27mb/google/brya: enable config DRIVER_INTEL_ISH_HAS_MAIN_FW for truloJayvik Desai
Trulo ISH uses the MAIN FW loaded by the kernel driver. This commit enables DRIVER_INTEL_ISH_HAS_MAIN_FW for trulo, which skips printing the ISH BUP version. BUG=b:360144613 TEST=Local build successful and tested on trulo by toggling the config. enabling this config skips printing the ISH version in cbmem. 1. CONFIG enabled ``` trulo-rev1 ~ # cbmem -c | grep ISH [INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin ``` 2. CONFIG disabled ``` trulo-rev1 ~ # cbmem -c | grep ISH [DEBUG] ISH version: 5.4.2.36864 [INFO ] \_SB.PCI0.ISHB: Set firmware-name: ish_fw.bin ``` Change-Id: Ifebd563ec8ddb0378e1215a90396687857f3f71d Signed-off-by: Jayvik Desai <jayvik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84494 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-26mb/google/{nissa,trulo}: Add Vccin Aux Imon Iccmax default valueSimon Yang
Add default value in nissa and trulo devicetree.cb, ODM have to review the board design to follow RDC#646929 Power Map requirement. NOTE: The VccInAuxImonIccImax remains unchanged w/ and w/o this CL. BUG=b:330117043 BRANCH=firmware-nissa-15217.B TEST='emerge-nissa coreboot chromeos-bootimage' Change-Id: Iaedd34757aa6802edcae402e751bc39b9cfe9e0c Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83725 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-25mb/google/brya: Enable SOC_INTEL_COMMON_BASECODE_RAMTOP for vellSubrata Banik
Enable the SOC_INTEL_COMMON_BASECODE_RAMTOP Kconfig option for the google/vell mainboard. This option ensures improving the boot time on google/vell by 40ms in an average. BUG=b:352330495 TEST=Able to reduced google/vell boot time by 40ms. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Iedfd346c62b1ac79796042dd3569d846007b8f10 Reviewed-on: https://review.coreboot.org/c/coreboot/+/84525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-24mb/google/brya/var/vell: select SOC_INTEL_RAPTORLAKESubrata Banik
Select SOC_INTEL_RAPTORLAKE to force coreboot to use the RPL FSP headers for FSP as vell is using a converged firmware image. This effort also helps to save vell boot time by 80-100ms as RPL FSP is better optimized. Additionally, Raptor Lake platform only needs 1 SIPI-SIPI which saves 10ms of the boot time. BUG=b:352330495 TEST=Able to build and boot google/vell. warm reboot time w/o this CL ``` Total Time: 1,408,669 ``` warm reboot time w/ this CL ``` Total Time: 1,235,651 ``` Change-Id: I8f7dd76f00cfeff2908aeb805524706ac23403fa Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84491 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-24mb/google/brya/var/vell: Disable I2C6 controllerSubrata Banik
This patch disables unused I2C6 controller for the 'vell' variant of the 'brya' mainboard. BUG=b:352330495 TEST=Able to build and boot google/vell. Change-Id: I5b39e44bb64bf2285c962249c0d94a8d5325f0c7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84490 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-23mb/google/nissa/var/nivviks: Update the power resource for NVM and VCMSowmya V
Earlier change (https://review.coreboot.org/c/coreboot/+/84019) pushed to resolve the privacy LED blinking issue regressed the camera autofocus functionality. This change updates the power resource for NVM and VCM in line with the tivviks schematics to fix the issue. BUG=b:365899407 TEST=Build and boot tivviks. Verified the Autofocus and all the camera basic sanity tests. Change-Id: Id3e256d59982ac176844e289f18ee450079704b9 Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84420 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
2024-09-19mb/google/nissa/var/riven: enable WIFI SARDavid Wu
According to the CL:chrome-internal:7651905, Riven will use the fw_config to separate SAR setting. CNVI + ID_0 --> wifi_sar_0.hex for WIFI6 PCIE + ID_1 --> wifi_sar_9.hex for WIFI7 BUG=b:366060274 TEST=build, enabled iwlwifi debug, and check dmesg as below. iwl_sar_fill_table Chain[0]: iwl_sar_fill_table Band[0] = 132 * .125dBm iwl_sar_fill_table Band[1] = 136 * .125dBm iwl_sar_fill_table Band[2] = 136 * .125dBm iwl_sar_fill_table Band[3] = 136 * .125dBm iwl_sar_fill_table Band[4] = 136 * .125dBm iwl_sar_fill_table Band[5] = 144 * .125dBm iwl_sar_fill_table Band[6] = 144 * .125dBm iwl_sar_fill_table Band[7] = 144 * .125dBm iwl_sar_fill_table Band[8] = 144 * .125dBm iwl_sar_fill_table Band[9] = 144 * .125dBm iwl_sar_fill_table Band[10] = 144 * .125dBm iwl_sar_fill_table Chain[1]: iwl_sar_fill_table Band[0] = 132 * .125dBm iwl_sar_fill_table Band[1] = 136 * .125dBm iwl_sar_fill_table Band[2] = 136 * .125dBm iwl_sar_fill_table Band[3] = 136 * .125dBm iwl_sar_fill_table Band[4] = 136 * .125dBm iwl_sar_fill_table Band[5] = 144 * .125dBm iwl_sar_fill_table Band[6] = 144 * .125dBm iwl_sar_fill_table Band[7] = 144 * .125dBm iwl_sar_fill_table Band[8] = 144 * .125dBm iwl_sar_fill_table Band[9] = 144 * .125dBm iwl_sar_fill_table Band[10] = 144 * .125dBm Cq-Depend: chrome-internal:7651905 Change-Id: I647d64a008991a7a20791b2c87ea6308af6bb82e Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84339 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-17mainboard/google/{brox,brya}: Drop redundant CRASHLOG configSubrata Banik
This commit drops redundant CRASHLOG option for the brox and brya mainboards as SOC_INTEL_CRASHLOG config is now selected by the Alder Lake SoC directly. TEST=Able to build and boot google/brox w/o any functional impact of the crashlog feature. Change-Id: I83859d6e61a151d6930785df3466c185c69e8e66 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84366 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-17mb/google/brya/var/trulo: Update ISH GPIO config for tablet mode switchVarun Upadhyay
This patch configures the GPIO pins for ISH to notify EC about the tablet mode change in accordance with schematic_20240607. BUG=b:347811875 TEST=Build and boot google/trulo. Placed the device in tabletmode & on EC console,"tabletmode" command shows "tablet mode". Change-Id: Id22e397e46b522428ffdabe34a445ed7e4fb6fc5 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84351 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-17mb/google/brya: Drop redundant entries of crashlog configSubrata Banik
This patch removes the redundant crashlog config (SOC_INTEL_CRASHLOG) entry from BOARD_GOOGLE_BRYA0 and BOARD_GOOGLE_BRASK. BOARD_GOOGLE_BRYA_COMMON already selects a crashlog config, and brya0/brask board eventually selects the BOARD_GOOGLE_BRYA_COMMON config, making SOC_INTEL_CRASHLOG redundant. TEST=Successfully built and booted google/brya0. Change-Id: Iaff7954d4dafb4c6ca72a1521dfb434fb36b495a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84364 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-13mb/google/brask/var/bujia: Fix PSYS voltage settingShon
It return 0 when google_chromeec_command() on success, so get_input_power_voltage() should return adaptor voltage instead of psys_config default value. BUG=b:329037849 BRANCH=firmware-brya-14505.B TEST= cbmem -c | grep -i PsysPmax Change-Id: I848c92752b7a7b53f47c6296aad0bdda20e9b0bd Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84333 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-10mb/google/nissa/var/teliks: Update eMMC DLL tuning valueszengqinghong
Update eMMC DLL tuning values for improved initialization reliability. BUG=b:361013271 TEST=Cold reboot stress test over 2500 cycles Change-Id: Icd1f9c7bdec2bc99152a13ac4ce0724a26718a52 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84248 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-10mb/google/nissa/var/joxer: Use `DB_USB` to probe conn1 deviceSubrata Banik
Joxer experienced error messages during developer mode entry due to failed USB-C1 probing. This patch adds the `DB_USB DB_1C` probe directive to the `conn1` device in the overridetree, ensuring USB-C1 is only probed when `FW_CONFIG` supports the applicable hardware SKU. This should resolve the error flood seen during dev mode entry on Joxer. BUG=b:364240631 TEST=Able to build and boot google/joxer to OS without any error. w/o this patch: send_packet: CrosEC result code 9 send_packet: CrosEC result code 3 Failed to get PD_MUX_INFO port1 ret:-3 update_all_tcss_ports_states: port C1: get_usb_pd_mux_info failed send_packet: CrosEC result code 9 send_packet: CrosEC result code 3 Failed to get PD_MUX_INFO port1 ret:-3 w/ this patch: No error reported during dev mode entry Change-Id: I8cdefa01409d5a8a75032f30dacde40057e064dd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84255 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-06mb/google/brask/var/bujia: Add PSYS settingShon
According to the Intel OPS spec, the DC power from display is 12~19V@8A max. It can't set PsysPmax by unknown voltage, so get voltage by ec command "ectool adcread 4" then calculate PsysPmax value. The OPS display can supply 90W power, configure psys_pl2 to limit the system power to 90W. BUG=b:329037849 BRANCH=firmware-brya-14505.B TEST= USE="fw_debug" LOCALES="en" emerge-brask chromeos-bmpblk intel-rplfsp intel-adlfsp coreboot chromeos-bootimage Check adcread value by ectool adcread 4. If get 19540, PsysPmax should be 19540 * 8000 ~= 156 W. Check FSP debug log have the following message. PsysPmax = 156W Change-Id: Ic6e9c6ce9f3179c7d63c1169695fbc23188456dd Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-09-06mb/google/nissa/var/yavilla: Add 1.2V enable pin in VCMWisley Chen
Add control for the 1.2V enable pin in VCM to comply the mipi camera power sequence. 2.8V enable --> 1.2V enable --> reset BUG=b:362386165 TEST=Run ITS test Change-Id: I495b2e266ee3d24ed3334bb9c173b3993d095e8e Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84211 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-05mb/google/nissa/var/riven: Update GPIO pins for 3rd dmic supportDavid Wu
When world-facing camera is absent, coreboot need to enable GPP_R6(DMIC_WCAM_CLK) and GPP_R7(DMIC_WCAM_DATA) for 3rd dmic support BUG=b:333973512 TEST=Boot google/riven to OS and verify 3rd dmic working properly. Change-Id: I6c8780ce37b5d3987f5cdf6e6e6d0b4896b33230 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84141 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jayvik Desai <jayvik@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-09-04tree: Use boolean for emmc_enable_hs400_modeElyes Haouas
Change-Id: I41a877ed7f5f3d02904dc939b32996a7f6d45373 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84165 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_package_c_state_demotionElyes Haouas
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-04tree: Use boolean for disable_c1_state_auto_demotionElyes Haouas
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-09-02mb/google/nissa/var/teliks: Add fw_config fields for rtl8852becengjianeng
Add a new fw config field for wifi category as WIFI_6_8852, which is PCIe based. Also, enable WIFI_6_8852 for existing PCIe based wifi port as well as bluetooth port. BUG=b:356434907 BRANCH=NONE TEST=Verified Wifi6 module detection Change-Id: Ib6ba641c23cce7f1253022c9bb78b986b323bcaa Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84138 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-09-02mb/google/nissa/var/teliks: Force audio mute to avoid screen flickcengjianeng
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG=b:360243615 BRANCH=firmware-nissa-15217.B TEST:Verfied on Teliks and cannot reproduce the issue Change-Id: Iff488f6844c717ef24069c7176e7b8dfb07d8abc Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84137 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
2024-09-02mb/google/brya: Add romstage early graphics for trulo baseboardSubrata Banik
1) Add all required changes for eSOL support. 2) Select MAINBOARD_USE_EARLY_LIBGFXINIT for Trulo. The CSOT (MNC207QS1-1) panel is used for the devicetree. BUG=b:362895813 TEST=On-screen text message seen during MRC training on Trulo SKU1. MRC: no data in 'RW_MRC_CACHE' bootmode is set to: 0 DP PHY mode status not complete DP PHY mode status not complete DP PHY mode status not complete ... Informing user on-display of memory training Change-Id: Ic34a8601b3084aa5f780d358fb0b15b7e820d375 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84128 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
2024-09-01tree: Use boolean for s0ix_enableElyes Haouas
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-08-29mb/google/brya/var/nova: Configure scaler I2C GPIOsKenneth Chan
According to schematics, add GPP_H4/H5 configuration for scaler I2C pins (PCH_I2C_SCALER_SDA/SDL). BUG=b:358439747 TEST=emerge-constitution coreboot chromeos-bootimage. Build successfully and boot to verify I2C. Change-Id: Id831f594d6a57ed10867ae5ba05ae98c90ac7d9b Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84091 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-28mb/google/nissa/var/anraggar: Force audio mute to avoid screen flickSimon Yang
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login screen, it is because it inserts 12 blank frames if it receives the unmute in VB-ID. Always override the mute in VB-ID to avoid Tcon EC detected the audiomute_flag change. BUG:b=357764688 BRANCH=firmware-nissa-15217.B TEST:Verfied on Anraggar and cannot reproduce the issue Change-Id: I711dfd0803440e4b04f02849fed529c3872e023d Signed-off-by: Simon Yang <simon1.yang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-28mb/google/nissa/var/nivviks: Prevent camera LED blinking during bootSowmya V
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips initial probe during kernel boot and prevent privacy LED blink. TEST=Build and boot nivviks. Monitor the camera LED blinking during boot. Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-25Revert "mb/google/brya/var/xol: Change touchpad I2C interrupt type to GPIO_INT"Seunghwan Kim
This reverts commit aa6865291a7ddfae4c67fcfc55ebd0c13a376807. Reason for revert: We applied this patch for touchpad stuttering issue for XOl, but the same touchpad problem was reported. So we would revert this change and apply kernel patch (crrev/c/5808335) to avoid the touchpad issue. Change-Id: I78139932e76dbd4128fb325dd70b7dcff3bcc81c Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-24mb/google/nissa/var/nivviks: enable WIFI_SARDavid Wu
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG for WIFI_CATEGORY to choose the right wifi_sar hex file. Below is the file mapping: wifi_sar_0.hex = wifi6 wifi_sar_1.hex = wifi7 BUG=b:345596420 TEST=emerge-nissa coreboot chromeos-bootimage Cq-Depend: chrome-internal:7607427 Change-Id: If8339a2a1d32d3e885ef87ea2ec2847f107f1fbd Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84051 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/nissa/var/riven: Set VccIn Aux Imon IccMax to 25ADavid Wu
Iccmax of VccIn_Aux is 25A with MBVR design. BUG=b:348258637 TEST=Local build successfully and boot to OS normally. Change-Id: I59c420c03a8f01d185f616a2212798266b4251e0 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-08-23mb/google/nissa/var/sundance: Adjust GPIO GPP_C1 to no_pull-upRoger Wang
EE change GPP_C1 from pull-up to OD&no pull-up in PCH GPIO Table. BUG=b:358472598 TEST=Build and verified test result by EE team Change-Id: I84d1b42a39bebbcd610cebc46f979018fc79238f Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83904 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-23mb/google/nissa/var/nivviks: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: I0908ff500434401bf89a5313427cf304f32cf929 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84021 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2024-08-23mb/google/nissa/var/riven: Correct USB port for PCIE WLAN bluetoothDavid Wu
PCIE WLAN Bluetooth is on port8, need to correct USB port for PCIE WLAN bluetooth companion device. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: Ie8174567b863e1afe8b0a27e644e24e9d3de6d19 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84020 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-22mb/google/nissa/var/teliks: Adjust usb2 pin of wlanzengqinghong
Since the voltage value measured by the USB2 pin of the wlan is 500mv, it does not meet the design requirements. Adjusting the port length can reduce the voltage to 450mv, which meets the expected settings. BUG=b:361037189 TEST=1. The voltage measurements are as expected. 2. The Bluetooth and WiFi functions of the wlan module are verified to be normal. Change-Id: Icd1ec3b561ee5b3f55e5f97a56fd9cb7df893508 Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-08-21mb/google/byra/var/kinox: Add/update VBT filesMatt DeVillier
Kinox has two VBT options, selected via fw_config. Add the second option to CBFS, and update the original file. Extracted from Google_Kinox.14505.704.0.bin. TEST=build/boot kinix, verify firmware display init successful and payload menu visible. Verify correct VBT selected via cbmem log. Change-Id: I01c19222628fee3874ef592ec40b40d9bd679dce Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83996 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/goog/brya: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=firmware-brya-14505.B TEST=verify brask, nissa, or brya DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: Ic0ac73f8f29761f072d42f35e97198b56d32a9bc Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83949 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-20mb/google/nissa/var/riven: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on revin, check BRDS is shown in SSDT. Change-Id: I87cfbdd0b8a97d84a96af373855219c60f39f173 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-20mb/google/nissa/var/nivviks: Set PCIE WLAN bluetooth companion deviceSubrata Banik
To publish the Bluetooth Regulator Domain Settings under the right ACPI device scope, the wifi generic driver requires the bluetooth companion to be set accordingly. BUG=b:345596420 TEST=Build and test on nivviks, check BRDS is shown in SSDT. Change-Id: Ib654f22033c68edbc602f14537aaa2151800598d Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83943 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/brya/var/nova: Set up soundbar-related GPIOsKenneth Chan
Set up soundbar-related GPIOs for updating. BUG=b:358435383 TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I517da8de90487533e49e46649c5acf4ccfcc5160 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83936 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-19mb/google/nissa/var/sundance: Adjust WWAN GPIO sequenceRoger Wang
This patch removes WWAN configuration from the bootblock. It appears that setting it up in the bootblock may not be necessary. Configure in bootblock,the seq will be triggered at the same time. The customer would like us to leave some buffer for EN to RST. BUG=b:357764679 TEST=Build and verified test result by EE team Change-Id: I2c0e789c0bec293f4bca711e53644d62f4f83551 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83792 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-17mb/google/brya: Reset XHCI controller while preparing for S5Subrata Banik
This patch calls `xhci_host_reset()` function to perform XHCI controller reset. Currently, the PMC IPC times out while sending the USB-C (0xA7) command during poweron from S5 (S5->S4->S3->S0). On Brya variants, poweron from S5 state results in PMC error while sending PMC IPC (0xA7) to USB-C active ports, log here: localhost ~ # cbmem -c | grep ERROR [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x200a7 failed [ERROR]  pmc_send_ipc_cmd failed [ERROR]  Failed to setup port:0 to initial state [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x200a7 failed [ERROR]  pmc_send_ipc_cmd failed [ERROR]  Failed to setup port:1 to initial state [ERROR]  PMC IPC timeout after 1000 ms [ERROR]  PMC IPC command 0x20a0 failed This problem is not seen while powering on from G3 (G3->S5->S4->S3->S0). During poweron the state of USB ports are not the same between S5 and G3 and it appears that the active USB port still is in U3 (suspend) while PMC tries to send the IPC command, which results in a timeout. This patch utilises the S5 SMI handler to reset the XHCI controller using `xhci_host_reset()` prior entering into the S5, it helps to restore the port state to active hence, no PMC timeout is seen with this code change. Supporting Doc=Intel expected to release a TA (Technical Advisory) document to acknowledge this observation and supported W/A for ADL generation platforms. Till that time, keeping this W/A as part of the google/brya specific mainboard alone. Note: other ADL-SoC based mainboards might need to apply the similar W/A. BUG=b:227289581 TEST=No PMC timeout is observed while sending USB-C PMC command (0xA7) during resume from S5. Total Time: 1,045,855 localhost ~ # cbmem -c | grep ERROR No PMC timeout error is observed with this CL. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ibf06a64f055a0cee3659b410652082f31e18e149 Reviewed-on: https://review.coreboot.org/c/coreboot/+/63552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-15mb/goog/brya: Don't lock GPP_F15 (FPMCU_INT_L)Nick Vaccaro
Locking GPP_F15 causes DUTs with fingerprint sensor to not be able to correctly power down and stay powered down. This pin does not need to be locked. BUG=b:359692570, b:356750516 BRANCH=firmware-brya-14505.B TEST=`FW_NAME=gimble emerge-brya coreboot chromeos-bootimage`, flash and boot gimble into developer mode, then reboot into dev screen and select the "Power off" button and verify gimble powers off and does not power itself back up. Change-Id: I1c73035b02021b0d1268cd46dcd0841621556ad5 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83932 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-14mb/google/nissa/var/riven: Disable external fivrDavid Wu
In next phase, riven will remove external fivr. Use the board version to config external fivr for backward compatibility and show message. BUG=b:359062365 TEST=build, boot to OS, suspend/resume work normally. Change-Id: Id5f538b2eda7820a922b8d9ee14b2bae7df3726c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83891 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-13mb/google/brya/var/nova: Enable TCSS XHCI settingPranava Y N
This patch enables the TCSS XHCI in the devicetree to solve the genesys hub enumeration issue. BUG=b:348332200 TEST=Able to build google/nova and ensure lsusb can list genesys hub device. Change-Id: Ic8e25756a2975e884434c4c7e3d587f4c1f0ed0b Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83845 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-13mb/google/nissa/var/pujjoga: Modify GPP_C1 settingLeo Chou
Confirm with EE, the GPP_C1 don't need PU 20K. So modify GPP_C1 setting to remove PU 20k Schematic version: 500E_GEN4S_ADL_N_MB_0418 BUG=b:358162951 TEST=Build and boot on pujjoga. Change-Id: I7ad16cd29ab467d3eac74dab40522c577d91c747 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83818 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-13mb/google/nissa/var/pujjoga: Modify P sensor settingLeo Chou
1. The P sensor need follow WWAN FW_CONFIG to enable/disable 2. Modify GPP_H19 setting to PAD_CFG_GPI_APIC to fix PLT test fail Schematic version: 500E_GEN4S_ADL_N_MB_0418 BUG=b:357998089 TEST=1. Boot to OS and verify the P sensor devices is set based on fw_config. 2. Confirm that the PLT test can pass successfully. Change-Id: Ic3610180c8cf99eba9367e26bfc3666410af19f7 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-13mb/google/nissa/var/riven: Add elan touchscreen supportDavid Wu
This change adds the necessary configuration for the elan touchscreen (ELAN9004) device, connected to I2C bus 16. It includes settings for: * HID descriptor * Device description * IRQ configuration * Detection * Reset, stop and enable GPIOs with their respective delays * Power resource handling * HID descriptor register offset BUG=b:348125053 b:348126380 TEST=emerge-nissa coreboot boot with elan TS, make sure elan TS is functional. Change-Id: I64c5a11dfaacfcca34240375d4dca5c76a60f62e Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83876 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-11mb/google/nissa/var/teliks: Configure TPM IRQ for telikszengqinghong
Add TPM TIS ACPI interrupt configuration, set teliks's `TPM_TIS_ACPI_INTERRUPT` to 13. BUG=b:352263941 TEST=emerge-nissa coreboot Change-Id: Iaed51e0bb8abac0ed0b35bfcf12e95fd34f92242 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83832 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-11mb/google/nissa/var/teliks: Add DP AUX BIAS connectzengqinghong
Because one side is not displayed when using type-c projection, the configuration of DP AUX BIAS to SOC direct connection is added. BUG=b:352263941 TEST=DP function of MB and DB workable Change-Id: Id89d02212cdad549d1c26ed51a8d5af0f4e757c6 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83829 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brya/variants: Enable pch_hda_sdi_enable for trulo baseboardDinesh Gehlot
This patch enables pch_hda_sdi_enable for the trulo baseboard and removes SDI lanes update from its variants. BUG=b:350931954 TEST=Boot verified on google/craask and google/tivviks Change-Id: I2e0f43b8fffb5e583089769d2c7446b476ce5d5d Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83859 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-09mb/google/nissa/var/riven: Add G2 touchscreen supportDavid Wu
This change adds the necessary configuration for the G2 Touchscreen(GTCH7503) device, connected to I2C bus 40. It includes settings for: * HID descriptor * Device description * IRQ configuration * Detection * Reset and enable GPIOs with their respective delays * Power resource handling * HID descriptor register offset BUG=b:350844195 TEST=emerge-nissa coreboot boot with G2 TS, make sure G2 TS is functional. Change-Id: If17367cd62eb69a1237efe4aa3ca1a0c9640ba4c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83823 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-09mb/google/trulo: Enable EC MKBP deviceAmanda Huang
MKBP device is required for passing events from input sources to AP. Input sources include buttons (power, volume); switches (lid, tablet mode) and sysrq. BUG=b:357521411 TEST=Build coreboot and switch tablet mode on orisa. Change-Id: Ic712f53fb4063347c38df05167f0100afc06f979 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83819 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-09mb/google/brya: Enable storing ISH FW version for truloSubrata Banik
This change enables storing the ISH firmware version on the Trulo baseboard by selecting the `SOC_INTEL_STORE_ISH_FW_VERSION` config option. BUG=b:354607924 TEST=Able to dump ISH version on trulo. > cbmem -c | grep ISH [DEBUG] ISH version: 5.4.2.7780 Change-Id: I69a7fa19c53f435ef1f6306b259f703c7b196137 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83820 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-08mb/google/brya/var/trulo: Update ISH GPIO's configurationVarun Upadhyay
This patch configures the GPIO pins to enable ISH on the Trulo device, in accordance with schematic_20240607. BUG=b:354607924 TEST=Builds successfully for google/trulo. Change-Id: I3af478762e0a0aa35a2698e0ed87a4d8c24362f0 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83781 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-08mb/google/brya/var/orisa: Update ISH GPIO's configurationVarun Upadhyay
This patch configures the GPIO pins to enable ISH on the Orisa device, in accordance with schematic_20240607. BUG=b:354607924 TEST=Builds successfully for google/orisa. Change-Id: I24745ba629c59c092ce676b29915e356a4d8d8af Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83656 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com>
2024-08-06mb/google/trulo: Register Firmware name for ISHVarun Upadhyay
Define ISH main firmware name so ISH shim loader can load firmware from file system. BUG=b:354607924 TEST=Boot trulo board, check that ISH is enabled and loaded lspci shows: 00:12.0 Serial controller: Intel Corporation Device 54fc Change-Id: Id60cb416a1cce5407bd483f0ce54f477584459b1 Signed-off-by: Varun Upadhyay <varun.upadhyay@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83671 Reviewed-by: V Sowmya <v.sowmya@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-04mb/google/brya/var/nova: Adjust Type-C port to USB 2.0 onlyPranava Y N
This patch introduces the following changes, - Remove TCSS XHCI (USB 3.x) devicetree settings - Update Over Current (OC) & USB 2.0 config - Update TCSS-XHCI capabilities BUG=b:348332200 TEST=Able to build google/nova and ensure lsusb can list genesys hub device. Change-Id: I4b4025bea41f67224ac35ff2077b1394f2c3e380 Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83707 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-04mb/google/brya/var/nova: Remove PMC MUX settingPranava Y N
This patch removes the PMC MUX related setting from devicetree as Nova doesn't include a MUX for it's USB-C port. BUG=b:348332200 TEST=Able to build google/nova Change-Id: I23a949ba9b598d7a86c6f8b08a2821651978e489 Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-08-02mb/google/brya/var/trulo: Remove mux references from typec portAmanda Huang
The Type-C kernel driver no longer programs the AP mux. So remove device references to the TCSS Mux control device from the Type-C port driver. BUG=b:351117685 TEST=USB-C drive can be detected after system warm or cold reboot. Change-Id: I2fd6e8fcebd194da03ba3f264ee89037ca11769a Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83746 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-01mb/google/nissa: Create teliks variantzengqinghong
Create the teliks variant of the nissa reference board by copying the anraggar files to a new directory named for the variant. BUG=b:352263941 BRANCH=None TEST=1. util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_TELIKS 2. Run part_id_gen tool without any errors Change-Id: I744f4d7c2d35544d3a8a8f76e24bad3298442768 Signed-off-by: zengqinghong <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83408 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-08-01mb/google/brya/var/orisa: Remove mux references from typec portAmanda Huang
The Type-C kernel driver no longer programs the AP mux. So remove device references to the TCSS Mux control device from the Type-C port driver. BUG=b:351117685 TEST=USB-C drive can be detected after system warm or cold reboot. Change-Id: I4a24fb69ebec87f65b679cde0e4a1a8827cd365d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83722 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-07-31mb/google/trulo: Keep ISH default enableSubrata Banik
This patch drops fw_config probing for ISH because ISH IP should remains on by default for all Trulo variants. Additionally, removed the redundant ISH entries from variant override devicetree. BUG=b:354607924 TEST=Able to verify ISH PCI Device is available while booting eMMC sku. ``` lspci 00:00.0 Host bridge: Intel Corporation Device 461c ... 00:12.0 Serial controller: Intel Corporation Device 54fc ... 00:1a.0 SD Host controller: Intel Corporation Device 54c4 ``` Also, able to enter S0ix with this patch. ``` > suspend_stress_test -c 1 --ignore_s0ix_substates At AP console: s0ix errors: 0 s0ix substate errors: 0 s0ix pc10 errors: 0 At EC console: power state 5 = S0ix, in 0x38d87 ``` Change-Id: Ic1e415ec848ac91a9bbf21b26597f4e6b5f7a1f5 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83695 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 13:01:04 +0000