summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants
AgeCommit message (Collapse)Author
2023-04-10mb/google/brya: Compile gpio.c in SMM when neededMatt DeVillier
Without gpio.c compiled in, SMMSTORE will fail to initialize and hang. Add a conditional inclusion so gpio.c is compiled in SMM when SMMSTORE is selected. TEST=build/boot google/banshee with SMMSTORE support enabled Change-Id: If049cba98f13f060807058029306dcad2ada2d49 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-04-10mb/google/brya/var/omnigul: Add usb_lpm_incapable for DB Type-C portDtrain Hsu
Intel ADL-P USB Type-C ports are not compatible with Parade PS8815 retimer on USB U1/U2 transition. The usb_lpm_incapable config is used to disable USB U1/U2 transition for these Type-C ports. BUG=b:277149723 BRANCH=firmware-brya-14505.B TEST=Plug in device and check LPM sysfs nodes are disabled localhost ~ # cat /sys/bus/usb/devices/2-3/power/usb3_hardware_lpm_u1 disabled localhost ~ # cat /sys/bus/usb/devices/2-3/power/usb3_hardware_lpm_u2 disabled Change-Id: I618cd09f45ede0a76cf46b3e467ba87775dd5d9d Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ron Lee <ron.lee@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-10mb/google/brya/var/marasov: Configure Acoustic noise mitigationFrank Chu
- Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_8 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=b:271788117 TEST=build FW and system power on. Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I411c91e1e70285afbf31750a56a039d60bbe093f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tracy Wu <tracy.wu@intel.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
2023-04-04mb/google/brya/var/omnigul: Add ADL and RPL dptf settingsJamie Chen
Add Alder Lake (ADL) and Raptor Lake (RPL) dptf settings for omnigul BUG=b:273415170 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I8280f82ff1534ea63bcb448da231712bb4abd6d3 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-04-03mb/google/brask/var/constitution: correct Type-A USB3 port0/1 tx_de_empMorris Hsu
Set Type-A USB3 port0/1 tx_de_emp to 0x2B to fix the USB3 Gen2 RX signal integrity issue. BUG=None TEST=build FW and check Type-A USB3 port0/port1 RX pass Change-Id: I9296ae5a8a9d7aa49b3c7529a9c1b2d2829b15d0 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74142 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-04-03mb/google/brya/variants/hades: Add CPU power limitsTarun Tuli
Add CPU power limits support and values for RPL on Hades BUG=b:269371363 TEST=builds Change-Id: I22ef56152abe5a23067c5e923b07d60dc9fac8e7 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73895 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-04-03mb/google/nissa/var/uldren: Add overridetreeVan Chen
Add override devicetree based on schematics(ver. 20230308). BUG=b:272829190 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I9cd918c6a48cc6007a18c5aa94afe31fd9608718 Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73974 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-04-02soc/intel/alderlake: Add ADL-P 4+4 with 28W TDPPatrick Rudolph
Add the 28W TDP version of the ADL-P with MCHID 0x4629. Verified that all 28W SoCs have the same PL1/PL2 defined in Intel document #655258 "12th Generation Intel Core Processors Datasheet, Volume 1 of 2". Fixes the error seen in coreboot log: [ERROR] unknown SA ID: 0x4629, skipped power Limit Configuration Change-Id: Iad676f083dfd1cceb4df9435d467dc0f31a63f80 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74116 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-03-31mb/google/nissa/var/uldren: Update gpio settingsVan Chen
Configure GPIOs according to schematics(ver. 20230308). BUG=b:272829190 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Id414c9b0d94faffd2d71c348fc7146a6101196e9 Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
2023-03-31mb/google/brya/variants/hades: Add initial GPIO config for hades boardTarun Tuli
Initial hades GPIO config. Combination of original brya basebaord, Agah and new arbitrage output for hades design. Also moved GPIO config to the non baseboard variant model as we did on rex0. BUG=b:269371363 TEST=builds Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I2a850240dd7f3ddf137d6a2ebe8a147f8976c16b Reviewed-on: https://review.coreboot.org/c/coreboot/+/72679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-30mb/google/nissa/var/yavilla: Disable storage devices based on fw_configTony Huang
Disable devices in variant.c instead of adding probe statements to devicetree because storage devices need to be enabled when fw_config is unprovisioned, and devicetree does not currently support this (it disables all probed devices when fw_config is unprovisioned). BUG=b:273791621 TEST=emerge-nissa coreboot Change-Id: I1a6013e0ad0c430d83bbbad4b92392c8c4815b0d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-30mb/google/nissa/var/yavilla: Update devicetree settingTony Huang
Update devicetree according to yavilla's design. Add Kconfig for TPM I2C bus. BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I1b44436a7f93d62764d0451c738ae33976a24a15 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-03-29mb/google/brya/var/crota: Add lp5x memory parts for `K3KL6L60GM-MGCT`Terry Chen
Update the mem_parts_used.txt, generate Makefile.inc and dram_id.generated.txt for this part. DRAM Part Name ID to assign K3KL6L60GM-MGCT 5 (0101) BUG=b:267249674 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I20a12a58d8a3d66a901a14569ca710acba3c05f7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73920 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-03-29mb/google/nissa/var/yavilla: Update GPIO settingShon Wang
Configure GPIOs according to schematics. BUG=b:273791621 TEST=emerge-nissa coreboot Change-Id: I5a522b59468667d20674d55597cc06975bc12ab5 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2023-03-27mb/google/brya/var/omnigul: Add WIFI SAR tableJamie Chen
Add WIFI SAR table for omnigul. BUG=b:273170023,b:273652516 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I2db057371754961503cfdc59f21c365fc82672c4 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73940 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-26mb/google/brask/var/constitution: Add TcssAuxori for constitutionMorris Hsu
Enable SBU orientation handling by SoC for both USBC port2 and USBC port3. Constitution USBC port1 has retimer but USBC port2 and USBC port3 don't, they do not flip the data lines, hence we need to set bits for USBC ports. Change-Id: I4c5dfdba6c38c6e2f308b281ed316bb687ad8d8b Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-23mb/google/brya/var/taeko: Correct comments to prevent confusionJoey Peng
The PCIE RP 9 on taeko is for eMMC. Correct the comments to prevent confusion. BUG=b:271003060 Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ib49942b682d1817af9e8b4b61044aa170e18fea8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-03-22mb/google/hades: Add variant device treeEric Lai
Follow 03_16 schematic to add the device tree. BUG=b:272816611 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I85a05fec816954fd3408feccae84e0b9860ecdc0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73838 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-03-22mb/google/hades: Remove gspi from baseboard device treeEric Lai
GSPI is not used, remove it. BUG=b:271199379 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I55d3f5119bc502621bdeae63b3d1e4cf43582038 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-03-17mb/google/nissa/var/uldren: Create RAM ID tablevan_chen
DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) H9JCNNNBK3MLYR-N6E 0 (0000) K3KL6L60GM-MGCT 1 (0001) MT62F1G32D2DS-026 WT:B 2 (0010) K3KL8L80CM-MGCT 2 (0010) H58G56BK7BX068 2 (0010) BUG=b:270103716 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: Ia53c2be2ec606f42ac8bca06103b028e62ae6dbc Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-03-17mb/google/nissa/var/yavilla: Generate SPD ID for supported memory partsTony Huang
Add supported memory parts in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) H9JCNNNBK3MLYR-N6E 0 (0000) H58G56BK7BX068 1 (0001) MT62F1G32D2DS-026 WT:B 1 (0001) K3KL8L80CM-MGCT 1 (0001) H58G66BK7BX067 2 (0010) MT62F2G32D4DS-026 WT:B 2 (0010) K3KL9L90CM-MGCT 2 (0010) BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=run part_id_gen to generate SPD id Change-Id: I82919919ec33d6bf9d86132490df754873b5df88 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-17mb/google/brya: Create yavilla variantTony Huang
Create the yavilla variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:273791621 BRANCH=firmware-nissa-15217.B TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_YAVILLA Change-Id: I4539090da5e1db474a8f58a42aecc38659959f75 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73721 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-17mb/google/brya/var/omnigul: Update RAM ID tableJamie Chen
Add new ram_id:0010 for Micron MT62F1G32D2DS-023 WT:B. The RAM ID table has been assigned as: DRAM Part Name ID to assign K3KL8L80CM-MGCT 0 (0000) H58G56BK7BX068 0 (0000) MT62F1G32D2DS-026 WT:B 0 (0000) MT62F512M32D2DR-031 WT:B 1 (0001) H58G56BK8BX068 2 (0010) MT62F1G32D2DS-023 WT:B 2 (0010) BUG=b:273138520 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: Idc08624469590096047e5f77fb2e4ffb733f09ec Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73726 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-03-16mb/google/brya/var/taniks: Remove unused temp sensor settingJoey Peng
Rwmove temp sensor 3 for taniks since we do not use it. BUG=b:265075696 TEST=emerge-brya coreboot, flash to DUT and will not see error messages Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: Ib2c0cc8f1b2e65616c71d66632144ac89ca09fa1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-16mb/google/brask/var/aurash: Allow USB2/3 wakeups to (un)plug events in dtZoey Wu
BUG=b:271373437 BRANCH=none TEST=Verify USB-A device could wake up Aurash. Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: I67fc02d6c5660e0e3d1ab95bbda8ace1dc14b524 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73414 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-15mb/google/brya/var/omnigul: Correct mux_conn for USB C1Dtrain Hsu
Modify USB C1 mux_conn to 1. It should match ec settings. BUG=b:272394875, b:272667290 BRANCH=firmware-brya-14505.B TEST=Plug USB-C hub in USB C1 and could recognize USB drive and hdmi. Change-Id: I61b77405d1790b044174cef954e5bf910141f424 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-03-15mb/google/brya/var/omnigul:Fixed can't detect 3.5mm headphone jackJamie Chen
1. Modify irq_gpio GPP_H0 -> GPP_A23 BUG=b:272218750 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I8e178b149015ed8027b547e4c2109b3aef8a7484 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-15mb/google/brya/var/omnigul:Fixed Touch screen has no actionJamie Chen
1. Add generic.stop_gpio = GPP_C6 2. Add c.stop_off_delay_ms = 2 BUG=b:271966059 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I33857443d8a68e7b50ac5f8f08afc017fe4f5a59 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-14mb/google/brya: Create uldren variantvan_chen
Create the uldren variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:271513530 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ULDREN Change-Id: Ibbcd34fb4ef1f7464f0c94d2fcf75280c3eed6be Signed-off-by: van_chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73680 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-13mb/google/brask/var/kinox: Allow USB2/3 hotplug to wakeup S0ixDtrain Hsu
Allow USB2/3 hotplug event to wake up S0ix. BUG=b:236189998 BRANCH=firmware-brya-14505.B TEST=Verify USB-A device could wake up Kinox Change-Id: I8aeeeac6c21289b70bdc7ffddc57687ac39e8456 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-10mb/google/brya/var/omnigul: Fix SSD can not boot into OSJamie Chen
1. device ref pcie_rp11 -> pcie_rp9 on. BUG=b:270657362 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: If23785f42466ba94f33d4d15dde96de29dbb3a1e Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73530 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-10mb/google/brya/var/omnigul: Enable ELAN touchscreenDtrain Hsu
Enable ELAN eKTH5015M touchscreen. BUG=b:271966059 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I41eac949f21a48098b445f8d1b05f308672f7ab8 Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-09mb/google/brya/var/marasov: Half touch power-on delay to 150 msFrank Chu
Decrease Touch i2c delay during power-on sequence from 300 ms to 150 ms to make S0ix resume time meet requirement. BUG=b:264199989 TEST=Run the following test from chroot. test_that -b {BOARD_NAME} {device IP} f:.*power_UiResume/control Check seconds_system_resume value less than 500 msec Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ib81a9c1a90589b8b08e6ce6471db2abef96047ab Reviewed-on: https://review.coreboot.org/c/coreboot/+/73532 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-08mb/google/brask/var/constitution: update gpio settingsMorris Hsu
Remove GPP_D11,GPP_D12 in ramstage, follow baseboard brask setting. TEST=emerge-brask coreboot make sure HDMIA can display Change-Id: I953170f006699e3dc9d6111ded8234f66b9162c7 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73508 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-03-08mb/{brya,hdaes}/include/ec: Add EC_HOST_EVENT_GPUTarun Tuli
EC_HOST_EVENT_GPU was renamed from EC_HOST_EVENT_USB_CHARGER and thought to no longer be used. It was subsequently removed in I9e3e0e9b45385766343489ae2d8fc43fb0954923 Add back the mask for this event as it is infact required on certain Brya (Agah) and Hades variants. Signed-off-by: Tarun Tuli <taruntuli@google.com> BUG=b:216485035,b:258126464,b:266631157 BRANCH=none TEST=D-notifier events are received again from EC Change-Id: I9d7bf52efa9572e1bbd2f307420e09a7398a1ca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73217 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-03-08mb/google/nissa/var/craask: Extend sd_hold for touchpad/touchscreenTyler Wang
Extend sd_hold to meet touchpad/touchscreen SPEC. touchscreen: tHD > 100 ns touchpad: 900 ns > tHD > 300 ns After applied the change, the tHD meets reqirement. touchscreen: 35 ns --> 260 ns touchpad: 43 ns --> 368 ns BUG=b:271524470 TEST=build and measure the timing meet SPEC Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Change-Id: Iec2f72da80ffe8d4dd494caabbe1a97e52a81e78 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73349 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-03-07mb/google/hades: Change memory to SODIMMEric Lai
Add SODIMM support, drop the solderdown based on schematics. BUG=b:271199379 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I85ec79c3d8f1147a875c4d04017bb50347121ebb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-03-07mb/google/brya/var/taeko: Enable Fast VMode for taekoJoey Peng
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP threshold. BUG=b:270242461 BRANCH=firmware-brya-14505.B TEST=Verify that the feature is enabled by reading from fsp log Signed-off-by: Joey Peng <joey.peng@lcfc.corp-partner.google.com> Change-Id: I82c2016d9dfb39ff7b372815737d4ae62875340c Reviewed-on: https://review.coreboot.org/c/coreboot/+/73373 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-03-05mb/google/hades: Add baseboard device treeEric Lai
Add minimum device tree. Leave IOs default disable to optimize variant override complexity. BUG=b:271199379 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ibb056c07193b4265352a9ec74829dcf02a9340bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/73415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-03-04mb/google/brask/var/moli: Allow USB2/3 wakeups to (un)plug events in dtScott Chao
BUG=b:230398487 BRANCH=none TEST=Verify USB-A device could wake up Moli. Signed-off-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Change-Id: I1c8daf62dabe674a39b1416d886f9e470ae23a5b Reviewed-on: https://review.coreboot.org/c/coreboot/+/73174 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-03-04mb/google/brya: remove the skolas baseboardNick Vaccaro
The skolas baseboard is no longer needed, so this change removes the baseboard files for skolas and adjusts the config settings to that variants that used to select BOARD_GOOGLE_BASEBOARD_SKOLAS now select BOARD_GOOGLE_BASEBOARD_BRYA and SOC_INTEL_RAPTORLAKE. BUG=b:271470530 TEST="emerge-brya coreboot chromeos-bootimage", flash image-skolas.bin onto a skolas and verify it boots to kernel. Change-Id: I34cae7e471851aa52a64ce3af7bb506dc67f806b Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-03-02mb/google/brask/var/constitution: Enable Fast VMode for constitutionMorris Hsu
Fast VMode makes the SoC throttle when the current exceeds the I_TRIP threshold. TEST=FW_NAME=constitution emerge-brask coreboot Change-Id: I1e68f708b7740567e24f8a3ddb9832aeec7ee6b5 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73247 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Pablo Ceballos <pceballos@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-27mb/google/brya/var/osiris: Enable Fast VMode for osirisDavid Wu
Fast VMode nmakes the SoC throttle when the current exceeds the I_TRIP threshold. BUG=b:270640775 BRANCH=firmware-brya-14505.B TEST=Verify that the feature is enabled by reading from fsp log Change-Id: I35f577e1bab0f8dda10061903df13730e2c8ee04 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Bob Moragues <moragues@chromium.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-27mb/google/nissa/var/xivu: Disable world-facing microphoneIan Feng
Remove world-facing microphone for xivu360. Switching to world-facing camera will use the user-facing microphone to record sound. BUG=b:263927799 TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: Ibb720974b6488ce4453081e0bc5b4e7f34a6b0f6 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73233 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-by: John Su <john_su@compal.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-02-27mb/google/brask/var/constitution: Update overridetreeMorris Hsu
Update override devicetree based on schematics. BUG=None TEST=FW_NAME=constitution emerge-brask coreboot Change-Id: I883a806950821e6306242975764930035a94888e Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73110 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pablo Ceballos <pceballos@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-02-24Revert "mb/google/brya/var/gladios: Update gpio table"Robert Chen
This reverts commit 3eb17b91daac0b3acaffb01568d724d23c6f0eea. Reason for revert: PLTRST only keeps 18xms and it's too short for eMMC disk fully reset. Change-Id: If4277cb600bfe4e071959dacaf204fe7d3518f68 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73202 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-24Revert "mb/google/brya/var/lisbon: Update gpio table"Robert Chen
This reverts commit 0e0f9e51c4c4f190cbe7ef5bffa138601c644d3c. Reason for revert: PLTRST only keeps 18xms and it's too short for eMMC disk fully reset. Change-Id: I13b93747bdb4d39de1ffcfdc020648871fa6e048 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73203 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-24mb/google/brask/var/constitution: update gpio settingsMorris Hsu
Update GPP_E12,GPP_E13,GPP_H19 in ramstage. Update GPP_F11 in bootblock. TEST=emerge-brask coreboot Change-Id: Icdca7f574282da140ec64cea9cdda3ebccbe3eb8 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73194 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Pablo Ceballos <pceballos@google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-23intel/alderlake: remove skip_mbp_hob SOC chip configKapil Porwal
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to control the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP. This new option is hooked with `SkipMbpHob` UPD and is always disabled for RPL & ADL-N based ChromeOS platforms. It is not disabled for ADL-P based platforms because ADL-P FSP relies on MBP HOB for ChipsetInit version for ChipsetInit sync. As ChipsetInit sync doesn't occur if no MBP HOB, so it results S0ix issue. This limitation is addressed in the later platforms so creation of MBP HOB can be skipped for ADL-N and RPL based platforms. This made skip_mbp_hob SOC chip config variable redundant which is also removed as part of this change. BUG=none TEST=Build and boot to Google/Taniks. Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ia396b633a71aedf592c45b69063ee0528840fd2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/71996 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-02-22mb/google/*: Resume from suspend on critical batteryIvan Chen
This patch makes EC wake up AP from s3/s0ix for OS shutdown/hibernate when the state of charge drops to low_battery_shutdown_percent. BUG=b:255465618 TEST=emerge-nissa chromeos-bootimage (EC: https://crrev.com/c/4243898) Verify system resumes from s0ix and then enter S5 on nivviks with steps: 1. disconnect AC 2. powerd_dbus_suspend --disable_dark_resume=false 3. fakebatt 5 4. fakebatt 4 Change-Id: I63b5246432687e38ddfc5733ac3a115c3456d7e9 Signed-off-by: Ivan Chen <yulunchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73082 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-02-20mb/google/brya/var/skolas: remove disable_package_c_state_demotionNick Vaccaro
Package C state demotion is now disabled for all RPL SoCs from within soc/intel/alderlake/fsp_params, so no need to duplicate that in the skolas devicetree.cb. BUG=268296760 BRANCH=firmware-brya-14505.B TEST=Boot and verified that S0ix issue is resolved. Change-Id: I1c630e2efbdddd18a5423c79b73269e9b1be79c7 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/73074 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-02-17mb/google/nissa/yaviks: Tuning eMMC DLL value for eMMC initialization errorchia-ling.hou
BUG=b:265611305 TEST=Reboot test 2500 times pass Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: I2b114cac58a7fadeaee6d48996cb8b51f192e78f Reviewed-on: https://review.coreboot.org/c/coreboot/+/73022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-02-16mb/google/brya: Add new baseboard hades with variants hadesEric Lai
Add a new baseboard for hades, an Intel RPL based reference design. Also, add variants for the reference boards hades. This commit is a stub which only adds the minimum code needed for a successful build. Need update gpio and memory DQ pins after final shchematic comes out. BUG=b:269371363 TEST=abuild -a -x -c max -p none -t google/brya -b hades Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ib7fbdf997df8225cc7814a34f8b4e4e04884dbf9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73055 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-02-16mb/google/brask/var/aurash: Initiate coreboot settingZoey Wu
Initial Aurash configuration base on moli design. 1. Set up gpio. 2. Add memory config. 3. There is no SD card setting on aurash, remove it from overridetree. 4. Follow moli psys schematic design. 5. Enable BT offload. BUG=b:269063331 TEST=emerge-brask coreboot. Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Change-Id: Ia9088cc2937bab72c8c22af592392384a10616a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Ricky Chang <rickytlchang@google.com>
2023-02-15mb/google/brya/var/omnigul: Add memory parts supportJamie Chen
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1) Samsung K3KL8L80CM-MGCT 2) Hynix H58G56BK7BX068 3) Micron MT62F1G32D2DS-026 WT:B 4) Micron MT62F512M32D2DR-031 WT:B 5) Hynix H58G56BK8BX068 BUG=b:264340545 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I1f650c7e90804e871572f42ac925da85afd7f9d3 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72886 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyle Lin <kylelinck@google.com>
2023-02-15mb/google/brask/var/constitution: update gpio settingsMorris Hsu
Configure GPIOs according to schematics TEST=emerge-brask coreboot Change-Id: Ib27f1c334cad47b3be57f57b7cc8ca5530118328 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72945 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-15mb/google/brya/agah: Adjust i2c1 and i2c2 timing Parameters for 400KHzTarun Tuli
Adjust timing parameters on i2c1 and i2c2 to meet timing requirements. For SCL, the t-high time is now over the min 600ns requirement for 400KHz operation (measure at over 700ns). Also, this change does not violate other parameters - rise time, setup time and hold time. BUG=b:264704732 TEST=Verified all timings meet spec now Change-Id: I0e92b2c9c25e7fb5fa7082af3f4a88da168c3ef2 Signed-off-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-15Revert "mb/google/brya/vell: Add PS1/PS2 cutoff point"Shon Wang
This reverts commit e30695dbe196ea42864ad03af799706eaae11f02. for meet thermal criteria, modify PS1/PS2 cutoff to default value BUG=b:229803757 BRANCH=brya TEST='FW_NAME=vell emerge-brya coreboot' Change-Id: Ie009788116f1e25db8aed2df58102a316a8aeef2 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72833 Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-13mb/google/brya/var/lisbon: Update gpio tableRobert Chen
eMMC RST pin could reply on PLT_RST so we could keep GPP B3 in VIH. BUG=b:263548436 TEST=emerge-brask coreboot Change-Id: Iffbc9dc932325cdd2176b36795a2ff1b3690fbf8 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72941 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-13mb/google/brya/var/gladios: Update gpio tableRobert Chen
eMMC RST pin could reply on PLT_RST so we could keep GPP B3 in VIH. BUG=b:263548436 TEST=emerge-brask coreboot Change-Id: I610d53059e86945693bc5b3d7e43462e53640564 Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72940 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-10mb/google/brya/var/brya0: add RPL 28W dptf settingsSumeet Pawnikar
Add Raptor Lake (RPL) 28W dptf settings for Brya0 BUG=b:235311241 BRANCH=firmware-brya-14505.B TEST=Built and tested on brya Change-Id: I5d06c1ace5b481012ea39f2a57570eb6330479cb Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-02-10mb/google/brya/var/skolas: add RPL 28W dptf settingsSumeet Pawnikar
Add Raptor Lake (RPL) 28W dptf settings for Skolas BUG=b:235311241 BRANCH=firmware-brya-14505.B TEST=Built and tested on skolas Change-Id: I4364ca6a50906c2a6dd0e754238264c680e7ebd0 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-02-10mb/google/brya/var/brya0: update PL1 minimum valueSumeet Pawnikar
Update Power Limit1 (PL1) minimum value to 15W based on the Brya design. BRANCH=firmware-brya-14505.B BUG=b:235311241 TEST=Built and tested on Brya system Change-Id: Ifd5256221b82eae2cfe8009918f8ff4791751b4d Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72868 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-02-10mb/google/brya/var/skolas: update PL1 minimum valueSumeet Pawnikar
Update Power Limit1 (PL1) minimum value to 15W based on the skolas design. BRANCH=firmware-brya-14505.B BUG=b:235311241 TEST=Built and tested on Skolas system Change-Id: I1027ca2bf2323ac959474ee6c38e47fa530113da Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72727 Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-02-10mb/google/brya/var/brya0: update dptf thermal settingsSumeet Pawnikar
Update dptf thermal settings as per suggested by thermal team. Control fan based on TSR sensors, not based on CPU sensor temperature which changes too fast. BRANCH=firmware-brya-14505.B BUG=b:235311241, b:261749371 TEST=Built and tested on Brya system Change-Id: I58bc7132086b0776ee191a242bd1302554f3854f Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72867 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-02-10mb/google/brya/var/skolas: update dptf thermal settingsSumeet Pawnikar
Update dptf thermal settings as per suggested by thermal team. Control fan based on TSR sensors, not based on CPU sensor temperature which changes too fast. This change is based on the discussion on bug:235311241 comment#7. BRANCH=firmware-brya-14505.B BUG=b:235311241, b:261749371 TEST=Built and tested on Skolas system Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: Ibeddce61b0d73d82a85f486e7cb5cbfa9568953c Reviewed-on: https://review.coreboot.org/c/coreboot/+/71692 Reviewed-by: AlanKY Lee <alanky_lee@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-02-10mb/google/brya/var/constitution: Add SOLDERDOWN supportMorris Hsu
Constitution will use SOLDERDOWN. Add memory.c to override baseboard. Add mem_parts_used.txt and generate dram_id.generated.txt and Makefile.inc Memory: SAMSUNG K4U6E3S4AB-MGCL MICRON MT53E1G32D2NP-046 WT:B BUG=b:267539938 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a Change-Id: Id879b2a7491f29e9fca903dcf3c022ec8ffffab4 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72775 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-10mb/google/brask: Add EC_HOST_EVENT_USB_MUX S0ix wake eventDerek Huang
Add EC_HOST_EVENT_USB_MUX to MAINBOARD_EC_S0IX_WAKE_EVENTS for brask. Without it EC won't send host event to wake AP when USB MUX is changed during S0ix. It's there for brya but missing for brask. BUG=b:267573651 TEST=emerge-brask coreboot Signed-off-by: Derek Huang <derekhuang@google.com> Change-Id: Id08d9aec9ab3566176369f2ca25cd00b9f0a0ca5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72899 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2023-02-09mb/google/brya/var/omnigul: Add SOC I2C configJamie Chen
Add SoC config and .early_init = 1 in I2C1 BUG=b:263060849 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I661bdee6c7b9e6ea4cd0ab2006967d7c7ddd0f67 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72872 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-02-09mb/google/brya/var/omnigul: Modify NVMe and UFS Storage supportJamie Chen
1. Add fw_config:STORAGE_UFS & STORAGE_NVME to switch storage. 2. rp11 off change to on. BUG:b:263846075 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I35c02ac9cbb8442d7b4aae57f6c7b576b2b5f77b Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72090 Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-09mb/google/brya: Create aurash variantZoey Wu
Create the aurash variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:263691099 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_AURASH Change-Id: I595102778071f822c5cf69ceadeed174e5ea4836 Signed-off-by: Zoey Wu <zoey_wu@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72837 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Scott Chao <scott_chao@wistron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-08mb/google/brya: Add usb_lpm_incapable for Type-C port with PS8815Ron Lee
Intel ADL-P USB Type-C ports are not compatible with Parade PS8815 retimer on USB U1/U2 transition. The usb_lpm_incapable config is used to disable USB U1/U2 transition for these Type-C ports. This patch add usb_lpm_incapable config for the following variants with PS8815 retimer: - kinox MLB: C0 - volmar DB: C1 - osiris MLB: C0/C1 - mithrax DB: C1 - felwinter DB: C1 - taeko DB: C1 - gimble DB: C1 - gimble4es DB: C1 - taniks DB: C1 - marasov DB: C2 - gaelin MLB: C0/C1 - skolas DB: C1 - skolas4es DB: C1 - brya0 DB: C1 BUG=b:253402457 TEST=Plug in device and check LPM sysfs nodes are disabled localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u1 disabled localhost ~ # cat /sys/bus/usb/devices/2-X/power/usb3_hardware_lpm_u2 disabled Change-Id: Ie9246ff7908887404f49ec10ee781c8cba410557 Signed-off-by: Ron Lee <ron.lee@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71925 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-02-07mb/google/brya: Create constitution variantMorris Hsu
Create the constitution variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:267539938 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_CONSTITUTION Change-Id: Idb6089561d3aa5aac4448f9d46347c731f027e9c Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72730 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-06mb/google/brya/var/kano: Update ELAN TS delay time to 150msDavid Wu
ELAN updated the datasheet, the HID/I2C protocol's T3 delay time is 150ms now. Modify the kano's delay time to follow the requiremnet. BUG=b:247944006 TEST=Manually checked touchscreen works after reboot and suspend. Change-Id: I42a7737060a82c0b27717f1510b8ec64abd1465a Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72784 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paz Zcharya <pazz@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-02-05mb/google/brya/var/omnigul: Enable Cnvi BT Audio Offload featureJamie Chen
1. Enable Cnvi BT Audio Offload feature and also configure the virtual GPIO for CNVi Bluetooth I2S pads. 2. According to the SOC_GPIO_Table_20230116, Change GPIO GPP_D15, GPP_D16 to NC. BUG=b:264834572 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I4901c8cd660f2d47018e4cccdb67f666f0800423 Signed-off-by: Jamie chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72035 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
2023-02-05mb/google/brya/var/omnigul: Add variant specific devicetreeJamie Chen
This variant was added without a devicetree, so add the board specific devicetree according to schematic_20230110. BUG=b:263060849 BRANCH=None TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: Ie05c152a20953e3e2d5f4ba5f9c00160a3e418e1 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-02-05mb/google/nissa/var/craask: Modify clkreq to clksrc mappingRen Kuo
NVMe PCIe 9-12 using clk_src1 and clk_req2 mapping to hardware design, Due to inconsistency between PMC firmware and FSP, we need to set clk_src to clk_req number, not same as hardware mapping in coreboot. Then swap correct setting to clk_src=1,clk_req=2 in mFIT. BUG=b:265720813 TEST=build firmware and veirfy suspend function on DUT. Cq-Depend: chrome-internal:5351299 Change-Id: Ia057dfa98cb9293d9e212edb4e4ac198e94e8985 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72051 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-05mb/google/brya/var/marasov: Turn off camera power during S0ixFrank Chu
Turn off camera power during S0ix to improve power consumption. BUG=b:265754302 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: Ie2b300783adfc1cab30bc897d086a3674436724a Reviewed-on: https://review.coreboot.org/c/coreboot/+/72089 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-03mb/google/brya0,skolas4es,skolas: disable Tccold HandshakeSelma Bensaid
The patch disables Tccold Handshake to prevent possible display flicker issue for skolas board. Please refer to Intel doc#723158 for more information. BUG=b:221461379 BRANCH=firmware-brya-14505.B TEST=Boot to OS on Skolas, verify upd setting. Change-Id: Ic184a61c27abd729667cd181d8f9954f58b67856 Signed-off-by: Selma Bensaid <selma.bensaid@intel.com> Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/68636 Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-03mb/google/nissa/var/craask: Add DPTF settings for 15W CPURen Kuo
Add ADL-N 15W CPU thermal settings. BUG=b:265101768 TEST=emerge-nissa coreboot Change-Id: I325704d6fc4ddaf56eaddd6a69bc619588df99cd Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71860 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Vidya Gopalakrishnan <vidya.gopalakrishnan@intel.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-02-02mb/google/brya: Skip locking for GPP_F14 GPIOMaulik Vaghela
This is regarding issues observed on multiple Brya and Nissa variant such as Skolas and Nivviks. Issue is that once coreboot sets GPE_EN bit for the GPIO pin and locks it, kernel is not able to change the control bit. Hence kernel is not able to control the IRQ on the pin when required. This issue was root caused to the patch which was setting GPE_EN bits for the GPIOs before locking. Ref: commit 38b8bf02d820 ("intelblocks: Add function to program GPE_EN before GPIO locking") This patch skips the locking for GPP_F14 to allow kernel to configure it later during reboot or shutdown as required. BUG=b:254064671 BRANCH=None TEST=Shutdown works on Skolas and Brya board with the patch. Signed-off-by: Maulik Vaghela <maulikvaghela@google.com> Change-Id: I7e4a6ac4668028bcd5fa400b9aa8eccf36a79620 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72648 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-02mb/google/skolas: Skip locking for GPP_F14 GPIOMaulik Vaghela
There is an existing issue for skolas boards where board wakes up from shutdown immediately due to touchpad wake signal. This issue was root caused to the patch which was setting GPE_EN bits for the GPIOs before locking. Ref: commit 38b8bf02d820 ("intelblocks: Add function to program GPE_EN before GPIO locking") Later issue was found to be with GPP_F14 configuration for skolas boards. While shutting down, kernel is not able to disable IRQ for touchpad due to GPE_EN register getting locked and it is preventing shutdown of the board. This patch skips the locking for GPP_F14 to allow kernel to configure it later. BUG=b:254064671 BRANCH=None TEST=Shutdown works on Skolas board with the patch. Nissa Bug: 234097956 Signed-off-by: Maulik Vaghela <maulikvaghela@google.com> Change-Id: I09cf1af1f5ab11b06073755374ee8a306984d557 Reviewed-on: https://review.coreboot.org/c/coreboot/+/72426 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-02-01mb/google/brya/var/omnigul: Add memory configAmanda Huang
Configure the rcomp, dqs and dq tables based on the schematic. BUG=b:264340545 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I82ca8aa9c3535983d5c506c15dbc69e7be926fa0 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Marx Wang <marx.wang@intel.com>
2023-01-30src/mainboard: Remove unnecessary space after castsElyes Haouas
Change-Id: Id8e1a52279e6a606441eefe30e24bcd44e006aad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69815 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-01-22mb/google/brya: Add lp5x memory parts for CrotaTerry Chen
Update the mem_parts_used.txt, generate Makefile.inc and dram_id.generated.txt for this part. DRAM Part Name ID to assign MT62F1G32D2DS-026 WT:B 4 (0100) K3KL8L80CM-MGCT 4 (0100) H58G56BK7BX068 4 (0100) BUG=b:259467147 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Change-Id: I204e871129a1b15d7c373d579e10a7b9ab6deabe Reviewed-on: https://review.coreboot.org/c/coreboot/+/71906 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-22Revert "mb/google/brya: Add EC mux device to brya0"Anil Kumar
This reverts commit 197d550d069f918698fa7cd8dda73e09fbfda30c. Reason for revert: breaks TBT and TypeC display on Brya0 Bug=265375098 Branch=firmware-brya-14505.B Test=Build and boot Skolas board with Brya0 image. Test TBT and TypeC display functionality. Change-Id: Ia0283b023949476e90edff7151d605fa36331bfd Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/72081 Reviewed-by: Prashant Malani <pmalani@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-01-20mb/google/brya/var/gaelin: Add touch panel module settingMike Shih
1. Enable multiple GPIOs to support the touch panel. 2. Add I2C setting for touch panel. BUG=b:260818082, b:264812909 BRANCH=firmware-brya-14505.B TEST=emerge-brask coreboot Change-Id: I2b805d1960f8b4e3e27f1af02f9c4d31f973288f Signed-off-by: Mike Shih <mikeshih@msi.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71782 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-01-18mb/google/brya/var/marasov: Remove wlan RTD3 supportFrank Chu
Wlan power enable pin is changed from EN_PP3300_WLAN to SLP_SUS_L. Remove unused RTD3 driver. BUG=b:263448873 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I22448a8cb28ddadb93b114c096e364980feab6fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/71693 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-17mb/google/marasov: Skip MBP HOB creation to save boot timeSubrata Banik
This change skips the MBP HOB creation since coreboot doesn't use it and also helps to reduce the boot time by ~10msec. Boot time data: Before: * 955:returning from FspSiliconInit 897,278 (33,603) After: * 955:returning from FspSiliconInit 864,543 (21,273) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia97cca560869fcfd55e65c2e1719cceec6f3ab7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/71873 Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-15mb/google/brya/var/marasov: Update Aux settingsFrank Chu
Follow hardware design to correct aux setting on USB-C ports to fix DP monitor can not output data through type-C port 0 USB-C port 0 did not have retimer. USB-C port 1 have retimer. USB-C port 0 AUX_DC_P connect to GPP_E22. USB-C port 0 AUX_DC_N connect to GPP_E23. BUG=b:263212450 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage DP monitor display normally Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I3af7522f7b6477edcd88004ce1d5f86aeebe3393 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71222 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-15drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flagMatt DeVillier
Exposing the GPIOs via an ACPI PowerResource and the _CRS results in the OS driver and ACPI thinking they own the GPIO. This can cause timing problems because it's not clear which system should be controlling the GPIO. Previously, we flagged as an error any device which set the 'has_power_resource' flag but did not set 'disable_gpio_export_in_crs.' There's no reason to require explicit disablement however, so drop the superfluous 'disable' flag, and change the _CRS generation to check if the GPIOs will be exported via the 'has_power_resource' flag instead. BUG=b:265055477 TEST=build/boot skyrim, dump SSDT and verify touchscreen GPIOs only listed under PRx, not under _CRS. Change-Id: I837ae6c6fe4b8e1c4e10686406cba06bdb7759d2 Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-01-13mainboard: Remove duplicated <soc/gpio.h>Elyes Haouas
<gpio.h> chain-include <soc/gpio.h>. Change-Id: Ia57d5cd33c70b6a755babd4db56c64c0e3666f9f Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-01-13mb/google/brya/var/omnigul: Update GPIO settingsjamie_chen
Configure GPIOs based from EE. BUG=b:263060849 BRANCH=None TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I5cfaa8fce6df7f09b744fb3e0b7b1d5b6acdc79b Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
2023-01-12mb/google/brya: Add romstage early graphics for bryaJeremy Compostella
BUG=b:252792591 BRANCH=firmware-brya-14505.B TEST=On-screen text message seen during MRC training on skolas with a few extra patches Change-Id: I41c9cccb09dea52e2318f8f9ebeeda3697a7b514 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/70304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71696
2023-01-11mb/google/nissa/var/craask: Disable storage devices based on fw_configReka Norman
Disable devices in variant.c instead of adding probe statements to devicetree because storage devices need to be enabled when fw_config is unprovisioned, and devicetree does not currently support this (it disables all probed devices when fw_config is unprovisioned). BUG=b:263920313 TEST=Boot to OS on craask eMMC and NVMe SKUs with both unprovisioned fw_config and fw_config set correctly. Change-Id: I4167ee4d00b9ae8fe074c6f5e7a2d5a7382bfe6d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71726 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-01-11mb/google/nissa/var/yaviks: Disable storage devices based on fw_configReka Norman
Disable devices in variant.c instead of adding probe statements to devicetree because storage devices need to be enabled when fw_config is unprovisioned, and devicetree does not currently support this (it disables all probed devices when fw_config is unprovisioned). BUG=b:251055188 TEST=Boot to OS on yaviks eMMC and UFS SKUs with both unprovisioned fw_config and fw_config set correctly. On UFS SKU with fw_config set, eMMC no longer shows up in lspci. (On eMMC SKU, UFS and ISH were already disabled by the coreboot PCI scan so there's no change in behaviour.) Change-Id: I31402cb49cffefd98b6fed971f249528448b1d0d Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kangheui Won <khwon@chromium.org>
2023-01-11mb/google/brya/var/omnigul: Add memory parts supportAmanda Huang
Add new memory parts in the mem_parts_used.txt and generate the SPD ID for the parts. The memory parts being added are: 1) Samsung K3KL8L80CM-MGCT 2) Hynix H58G56BK7BX068 3) Micron MT62F1G32D2DS-026 WT:B 4) Micron MT62F512M32D2DR-031 WT:B BUG=b:264340545 BRANCH=firmware-brya-14505.B TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I699070596a77c975254660a1ba74b0f40026186d Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-01-10mb/google/brya/var/marasov: Update DPTF parametersFrank Chu
Add the first version DPTF parameters. BUG=b:264217345 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I55a3066ef61ce461f40b425a6549d083c29256e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71634 Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-01-10mb/google/brya/var/marasov: Disable touch panel power for non-touch skuFrank Chu
Disable touch panel power for non-touch sku by fw_config TOUCH field. BUG=b:263452842 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com> Change-Id: I4736f94481512806377b733b26fdc7290046c555 Reviewed-on: https://review.coreboot.org/c/coreboot/+/71691 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kyle Lin <kylelinck@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-01-09mb/google/brya/var/lisbon: Update RTL8168 LAN LED configRobert Chen
Adjust LAN LED config to 0x060f. BUG=b:246657849 TEST=emerge-brask coreboot Change-Id: Idd5ed2bf7eb4ee5990f2a842cba43f967ae3825e Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/71698 Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ricky Chang <rickytlchang@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 19:51:45 +0000