mb/google/nissa/var/yavilla: Update devicetree setting

Update devicetree according to yavilla's design.
Add Kconfig for TPM I2C bus.

BUG=b:273791621
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot

Change-Id: I1b44436a7f93d62764d0451c738ae33976a24a15
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74040
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>

2 files changed, 413 insertions, 2 deletions

diff --git a/src/mainboard/google/brya/variants/yavilla/include/variant/gpio.h b/src/mainboard/google/brya/variants/yavilla/include/variant/gpio.h
index c4fe342621..c96b01fc15 100644
--- a/src/mainboard/google/brya/variants/yavilla/include/variant/gpio.h
+++ b/src/mainboard/google/brya/variants/yavilla/include/variant/gpio.h
@@ -5,4 +5,8 @@
 
 #include <baseboard/gpio.h>
 
+#define WWAN_FCPO	GPP_D6
+#define WWAN_RST	GPP_F12
+#define T2_OFF_MS	20
+
 #endif
diff --git a/src/mainboard/google/brya/variants/yavilla/overridetree.cb b/src/mainboard/google/brya/variants/yavilla/overridetree.cb
index 4f2c04a57a..e3d3cacfee 100644
--- a/src/mainboard/google/brya/variants/yavilla/overridetree.cb
+++ b/src/mainboard/google/brya/variants/yavilla/overridetree.cb
@@ -1,6 +1,413 @@
 chip soc/intel/alderlake
+	register "sagv" = "SaGv_Enabled"
 
-        device domain 0 on
-        end
+	# Bit 0 - C0 has no redriver, so enable SBU muxing in the SoC.
+	# Bit 2 - C1 has a redriver which does SBU muxing.
+	# Bit 1,3 - AUX lines are not swapped on the motherboard for either C0 or C1.
+	register "tcss_aux_ori" = "1"
 
+	register "typec_aux_bias_pads[0]" = "{.pad_auxp_dc = GPP_E22, .pad_auxn_dc = GPP_E23}"
+
+	register "usb2_ports[6]" = "USB2_PORT_MID(OC_SKIP)"	# USB2 WWAN
+	register "usb2_ports[7]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth port for PCIe WLAN
+	register "usb2_ports[9]" = "USB2_PORT_MID(OC_SKIP)"	# Bluetooth port for CNVi WLAN
+
+	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC_SKIP)" # USB3 WWAN
+
+	# Configure external V1P05/Vnn/VnnSx Rails
+	register "ext_fivr_settings" = "{
+		.configure_ext_fivr = 1,
+	}"
+
+	# Intel Common SoC Config
+	#+-------------------+---------------------------+
+	#| Field             |  Value                    |
+	#+-------------------+---------------------------+
+	#| I2C0              | TPM. Early init is        |
+	#|                   | required to set up a BAR  |
+	#|                   | for TPM communication     |
+	#| I2C1              | Touchscreen               |
+	#| I2C2              | WCAM                      |
+	#| I2C3              | Audio                     |
+	#| I2C5              | Trackpad                  |
+	#+-------------------+---------------------------+
+	register "common_soc_config" = "{
+		.i2c[0] = {
+			.early_init = 1,
+			.speed = I2C_SPEED_FAST_PLUS,
+		},
+		.i2c[1] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[2] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[3] = {
+			.speed = I2C_SPEED_FAST,
+		},
+		.i2c[5] = {
+			.speed = I2C_SPEED_FAST,
+		},
+	}"
+
+	device domain 0 on
+		device ref dtt on
+			chip drivers/intel/dptf
+				## sensor information
+				register "options.tsr[0].desc" = ""CPU""
+				register "options.tsr[1].desc" = ""5V Regulator""
+				register "options.tsr[2].desc" = ""Charger""
+
+				# TODO: below values are initial reference values only
+				## Passive Policy
+				register "policies.passive" = "{
+					[0] = DPTF_PASSIVE(CPU,         CPU,           95, 5000),
+					[1] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_0, 75, 5000),
+					[2] = DPTF_PASSIVE(CHARGER,     TEMP_SENSOR_1, 75, 5000),
+					[3] = DPTF_PASSIVE(CPU,         TEMP_SENSOR_2, 75, 5000),
+				}"
+
+				## Critical Policy
+				register "policies.critical" = "{
+					[0] = DPTF_CRITICAL(CPU,               105, SHUTDOWN),
+					[1] = DPTF_CRITICAL(TEMP_SENSOR_0,      85, SHUTDOWN),
+					[2] = DPTF_CRITICAL(TEMP_SENSOR_1,      85, SHUTDOWN),
+					[3] = DPTF_CRITICAL(TEMP_SENSOR_2,      85, SHUTDOWN),
+				}"
+
+				register "controls.power_limits" = "{
+					.pl1 = {
+							.min_power = 3000,
+							.max_power = 6000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 200
+						},
+					.pl2 = {
+							.min_power = 25000,
+							.max_power = 25000,
+							.time_window_min = 28 * MSECS_PER_SEC,
+							.time_window_max = 32 * MSECS_PER_SEC,
+							.granularity = 1000
+						}
+				}"
+
+				## Charger Performance Control (Control, mA)
+				register "controls.charger_perf" = "{
+					[0] = { 255, 1700 },
+					[1] = {  24, 1500 },
+					[2] = {  16, 1000 },
+					[3] = {   8,  500 }
+				}"
+
+				device generic 0 on end
+			end
+		end
+		device ref ipu on
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "0x50000"
+				register "acpi_name" = ""IPU0""
+				register "device_type" = "INTEL_ACPI_CAMERA_CIO2"
+
+				register "cio2_num_ports" = "1"
+				register "cio2_lanes_used" = "{2}" # 2 CSI Camera lanes are used
+				register "cio2_lane_endpoint[0]" = ""^I2C2.CAM0""
+				register "cio2_prt[0]" = "1"
+				device generic 0 on end
+			end
+		end
+		device ref cnvi_wifi on
+			chip drivers/wifi/generic
+				register "enable_cnvi_ddr_rfim" = "true"
+				device generic 0 on end
+			end
+		end
+		device ref i2c1 on
+			chip drivers/i2c/hid
+				register "generic.hid" = ""ELAN2513""
+				register "generic.desc" = ""ELAN Touchscreen""
+				register "generic.irq" = "ACPI_IRQ_LEVEL_LOW(GPP_C7_IRQ)"
+				register "generic.probed" = "1"
+				register "generic.reset_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C1)"
+				register "generic.reset_delay_ms" = "20"
+				register "generic.reset_off_delay_ms" = "2"
+				register "generic.stop_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_C6)"
+				register "generic.stop_delay_ms" = "280"
+				register "generic.stop_off_delay_ms" = "2"
+				register "generic.enable_gpio" = "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_C0)"
+				register "generic.enable_delay_ms" = "1"
+				register "generic.has_power_resource" = "1"
+				register "hid_desc_reg_offset" = "0x01"
+				device i2c 15 on end
+			end
+			chip drivers/generic/gpio_keys
+				register "name" = ""PENH""
+				register "gpio" = "ACPI_GPIO_INPUT_ACTIVE_LOW(GPP_F13)"
+				register "key.wake_gpe" = "GPE0_DW2_15"
+				register "key.wakeup_route" = "WAKEUP_ROUTE_SCI"
+				register "key.wakeup_event_action" = "EV_ACT_DEASSERTED"
+				register "key.dev_name" = ""EJCT""
+				register "key.linux_code" = "SW_PEN_INSERTED"
+				register "key.linux_input_type" = "EV_SW"
+				register "key.label" = ""pen_eject""
+				device generic 0 on end
+			end
+		end
+		device ref i2c2 on
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = ""OVTI8856""
+				register "acpi_uid" = "0"
+				register "acpi_name" = ""CAM0""
+				register "chip_name" = ""Ov 8856 Camera""
+				register "device_type" = "INTEL_ACPI_CAMERA_SENSOR"
+				register "has_power_resource" = "1"
+
+				register "ssdb.lanes_used" = "2"
+				register "ssdb.link_used" = "1"
+				register "ssdb.vcm_type" = "0x0C"
+				register "vcm_name" = ""VCM0""
+				register "num_freq_entries" = "2"
+				register "link_freq[0]" = "720000000"
+				register "link_freq[1]" = "360000000"
+				register "remote_name" = ""IPU0""
+
+				#Controls
+				register "clk_panel.clks[0].clknum" = "IMGCLKOUT_3"
+				register "clk_panel.clks[0].freq" = "FREQ_19_2_MHZ"
+
+				register "gpio_panel.gpio[0].gpio_num" = "GPP_D15"  # EN_PP2800_WCAM_X
+				register "gpio_panel.gpio[1].gpio_num" = "GPP_D16"  # EN_PP1800_PP1200_WCAM_X
+				register "gpio_panel.gpio[2].gpio_num" = "GPP_D3"   # WCAM_RST_L
+
+				#_ON
+				register "on_seq.ops_cnt" = "5"
+				register "on_seq.ops[0]" = "SEQ_OPS_CLK_ENABLE(0, 0)"
+				register "on_seq.ops[1]" = "SEQ_OPS_GPIO_ENABLE(0, 5)"
+				register "on_seq.ops[2]" = "SEQ_OPS_GPIO_ENABLE(1, 5)"
+				register "on_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(2, 5)"
+				register "on_seq.ops[4]" = "SEQ_OPS_GPIO_ENABLE(2, 5)"
+
+				#_OFF
+				register "off_seq.ops_cnt" = "4"
+				register "off_seq.ops[0]" = "SEQ_OPS_CLK_DISABLE(0, 0)"
+				register "off_seq.ops[1]" = "SEQ_OPS_GPIO_DISABLE(2, 0)"
+				register "off_seq.ops[2]" = "SEQ_OPS_GPIO_DISABLE(1, 0)"
+				register "off_seq.ops[3]" = "SEQ_OPS_GPIO_DISABLE(0, 0)"
+
+				device i2c 10 on end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_uid" = "3"
+				register "acpi_name" = ""VCM0""
+				register "chip_name" = ""DW AF DAC""
+				register "device_type" = "INTEL_ACPI_CAMERA_VCM"
+
+				register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
+				register "vcm_compat" = ""dongwoon,dw9714""
+
+				device i2c 0C on end
+			end
+			chip drivers/intel/mipi_camera
+				register "acpi_hid" = "ACPI_DT_NAMESPACE_HID"
+				register "acpi_uid" = "1"
+				register "acpi_name" = ""NVM0""
+				register "chip_name" = ""GT24C08""
+				register "device_type" = "INTEL_ACPI_CAMERA_NVM"
+
+				register "pr0" = ""\\_SB.PCI0.I2C2.CAM0.PRIC""
+
+				register "nvm_size" = "0x2000"
+				register "nvm_pagesize" = "1"
+				register "nvm_readonly" = "1"
+				register "nvm_width" = "0x10"
+				register "nvm_compat" = ""atmel,24c08""
+
+				device i2c 50 on end
+			end
+		end
+		device ref i2c3 on
+			chip drivers/i2c/generic
+				register "hid" = ""RTL5682""
+				register "name" = ""RT58""
+				register "desc" = ""Headset Codec""
+				register "irq_gpio" = "ACPI_GPIO_IRQ_EDGE_BOTH(GPP_A23)"
+				# Set the jd_src to RT5668_JD1 for jack detection
+				register "property_count" = "1"
+				register "property_list[0].type" = "ACPI_DP_TYPE_INTEGER"
+				register "property_list[0].name" = ""realtek,jd-src""
+				register "property_list[0].integer" = "1"
+				device i2c 1a on end
+			end
+		end
+		device ref i2c5 on
+			chip drivers/i2c/generic
+				register "hid" = ""ELAN0000""
+				register "desc" = ""ELAN Touchpad""
+				register "irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "wake" = "GPE0_DW2_14"
+				register "detect" = "1"
+				device i2c 15 on end
+			end
+			chip drivers/i2c/hid
+				register "generic.hid" = ""SYNA0000""
+				register "generic.cid" = ""ACPI0C50""
+				register "generic.desc" = ""Synaptics Touchpad""
+				register "generic.irq" = "ACPI_IRQ_WAKE_LEVEL_LOW(GPP_F14_IRQ)"
+				register "generic.wake" = "GPE0_DW2_14"
+				register "generic.detect" = "1"
+				register "hid_desc_reg_offset" = "0x20"
+				device i2c 0x2c on end
+			end
+		end
+		device ref hda on
+			chip drivers/generic/max98357a
+				register "hid" = ""MX98360A""
+				register "sdmode_gpio" =  "ACPI_GPIO_OUTPUT_ACTIVE_HIGH(GPP_A11)"
+				register "sdmode_delay" = "5"
+				device generic 0 on end
+			end
+		end
+		device ref pcie_rp4 on
+			# PCIe 4 WLAN
+			register "pch_pcie_rp[PCH_RP(4)]" = "{
+				.clk_src = 2,
+				.clk_req = 2,
+				.flags = PCIE_RP_LTR | PCIE_RP_AER,
+			}"
+			chip drivers/wifi/generic
+				register "wake" = "GPE0_DW1_03"
+				register "add_acpi_dma_property" = "true"
+				device pci 00.0 on end
+			end
+		end
+		device ref pcie_rp7 off end #PCIE7 no SD card
+		device ref emmc on end
+		device ref ish on
+			chip drivers/intel/ish
+				register "add_acpi_dma_property" = "true"
+				device generic 0 on end
+			end
+		end
+		device ref ufs on end
+		device ref pch_espi on
+			chip ec/google/chromeec
+				use conn0 as mux_conn[0]
+				use conn1 as mux_conn[1]
+				device pnp 0c09.0 on end
+			end
+		end
+		device ref pmc hidden
+			chip drivers/intel/pmc_mux
+				device generic 0 on
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port1 as usb2_port
+						use tcss_usb3_port1 as usb3_port
+						device generic 0 alias conn0 on end
+					end
+					chip drivers/intel/pmc_mux/conn
+						use usb2_port2 as usb2_port
+						use tcss_usb3_port2 as usb3_port
+						device generic 1 alias conn1 on end
+					end
+				end
+			end
+		end
+		device ref tcss_xhci on
+			chip drivers/usb/acpi
+				device ref tcss_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref tcss_usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+						device ref tcss_usb3_port2 on end
+					end
+				end
+			end
+		end
+		device ref xhci on
+			chip drivers/usb/acpi
+				device ref xhci_root_hub on
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C0 (MLB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_C(LEFT, LEFT, ACPI_PLD_GROUP(1, 1))"
+						device ref usb2_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-C Port C1 (DB)""
+						register "type" = "UPC_TYPE_C_USB2_SS_SWITCH"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_C(RIGHT, LEFT, ACPI_PLD_GROUP(2, 1))"
+						device ref usb2_port2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb2_port3 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_A"
+						register "use_custom_pld" = "true"
+						register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(4, 1))"
+						device ref usb2_port4 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port5 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 UFC""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb2_port6 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB2 Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port8 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""CNVi Bluetooth""
+						register "type" = "UPC_TYPE_INTERNAL"
+						register "reset_gpio" =
+							"ACPI_GPIO_OUTPUT_ACTIVE_LOW(GPP_D4)"
+						device ref usb2_port10 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A0 (MLB)""
+						register "type" = "UPC_TYPE_USB3_A"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_A(LEFT, RIGHT, ACPI_PLD_GROUP(3, 1))"
+						device ref usb3_port1 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 Type-A Port A1 (DB)""
+						register "type" = "UPC_TYPE_USB3_A"
+                                                register "use_custom_pld" = "true"
+                                                register "custom_pld" = "ACPI_PLD_TYPE_A(RIGHT, RIGHT, ACPI_PLD_GROUP(4, 1))"
+						device ref usb3_port2 on end
+					end
+					chip drivers/usb/acpi
+						register "desc" = ""USB3 WWAN""
+						register "type" = "UPC_TYPE_INTERNAL"
+						device ref usb3_port3 on end
+					end
+				end
+			end
+		end
+	end
 end