Age | Commit message (Expand) | Author |
2021-12-16 | mb/google/brya/var/felwinter: Add stylus probe for garage | Eric Lai |
2021-12-16 | mb/google/brya/var/vell: update overridetree | Kevin Chiu |
2021-12-15 | mb/google/brya/var/primus{4es}: Configure Acoustic noise mitigation | Casper Chang |
2021-12-15 | mb/google/brya/variant/taniks: Add memory settings | Joey Peng |
2021-12-15 | mb/google/brya/variants/taniks: Configure GPIOs according to schematics | Joey Peng |
2021-12-10 | mb/google/brya/var/taeko: Fix PLD group order (W/A) | Kevin Chang |
2021-12-10 | mb/var/gimble4es: Set PsysPmax to 143 W | Mark Hsieh |
2021-12-09 | mb/google/brya4es: sync change from brya0 (CB:58374) | YH Lin |
2021-12-09 | mb/google/brya/var/brask: Configure the ISOLATE pin of LAN | Alan Huang |
2021-12-09 | mb/google/brya/var/redrix4es: sync change from redrix | YH Lin |
2021-12-08 | mb/google/brya/var/primus: Fix PLD group order | Scott Chao |
2021-12-07 | mb/google/brya: add list of gpios to lock | Nick Vaccaro |
2021-12-06 | mb/google/brya/var/gimble: Configure Acoustic noise mitigation | Mark Hsieh |
2021-12-06 | mb/google/brya/var/redrix: Swap TPM I2C with touchscreen I2C | Wisley Chen |
2021-12-06 | mb/var/gimble: Set PsysPmax to 143 W | Chia-Ling Hou |
2021-12-06 | mb/google/brya/var/felwinter: Correct garage wake event | Eric Lai |
2021-12-03 | mb/google/brya/var/felwinter: Add WiFi SAR table for felwinter | Ian Feng |
2021-12-03 | mb/google/brya: Update camera NVM parameters | Bernardo Perez Priego |
2021-12-03 | mb/google/brya/var/brask: Enable LAN driver to program MAC | Alan Huang |
2021-12-03 | mb/google/brya/var/brask: Set vGPIO reset type | Kane Chen |
2021-12-03 | mb/google/brya/variants/primus: Swap TPM I2C with touchscreen I2C | Malik_Hsu |
2021-12-03 | mb/google/brya/var/taeko: Set vGPIO reset type | Kevin Chang |
2021-12-03 | mb/google/brya: Create taniks variant | Joey Peng |
2021-12-02 | mb/google/brya/var/brask: Set PL and PsysPL | Alan Huang |
2021-12-02 | mb/google/brya/var/baseboard/brask: Add power limits functions | Alan Huang |
2021-12-02 | mb/google/brya/var/gimble: Swap TPM I2C with touchscreen I2C | Mark Hsieh |
2021-12-02 | mb/google/brya/var/felwinter: Swap TPM and touchscreen I2C bus | Eric Lai |
2021-12-01 | mb/google/brya/redrix: Add _HID for privacy screen device | Tim Wawrzynczak |
2021-11-30 | mb/google/brya/var/kano: Enable USB2 port 9 for BlueTooth | David Wu |
2021-11-30 | brya: add various ES variants | YH Lin |
2021-11-26 | mb/google/brya/var/kano: swap TPM i2c with TS i2c for the next build phase | David Wu |
2021-11-25 | mb/google/brya/variants/primus: update gpios for power consumption | Malik_Hsu |
2021-11-25 | mb/google/brya/variants/primus: add fw config probe for speaker amp | Malik_Hsu |
2021-11-25 | mb/google/brya/var/felwinter: Add DPTF parameters for Felwinter | John Su |
2021-11-25 | mb/google/brya/var/primus: Update thermal table for primus | Ariel_Fang |
2021-11-25 | mb/google/brya/var/kano: Update thermal table | David Wu |
2021-11-25 | mb/google/brya/var/kano: set power limits for thermal | David Wu |
2021-11-23 | mb/google/brya/var/redrix: Disable autonomous GPIO power management | Wisley Chen |
2021-11-22 | mb/google/brya: Move cr50 configuration to variant | David Wu |
2021-11-22 | mb/google/brya/variants/primus: add fw_config_probe for ALC5682I-VS | Malik_Hsu |
2021-11-22 | mb/google/brya/var/felwinter: Add ALC5682I-VS codec support | Eric Lai |
2021-11-19 | mb/google/brya: Move EC_HOST_EVENT_USB_MUX wake event to S0ix only | Joey Peng |
2021-11-19 | mb/google/brya/var/redrix: Configure _DSC for CAM devices to ACPI_DEVICE_SLEE... | Varshit B Pandya |
2021-11-18 | mb/google/brya/var/felwinter: Correct USB3 TCSS setting | Eric Lai |
2021-11-18 | mb/google/brya/var/gimble: Include 2 new SPDs | Mark Hsieh |
2021-11-18 | mb/google/brya/var/redrix: De-assert SSD PERST# in romstage | Wisley Chen |
2021-11-18 | mb/google/brya/var/redrix: Correct WWAN power sequence | Wisley Chen |
2021-11-18 | mb/google/brya/var/redrix: Configure Acoustic noise mitigation | Wisley Chen |
2021-11-17 | mb/google/brya/var/felwinter: Add MT53E1G32D2NP-046 WT:B SPD | Eric Lai |
2021-11-17 | mb/google/brya/var/taeko: Correct touchpad GPE settings | Joey Peng |
2021-11-17 | mb/google/brya/var/taeko: disabled autonomous GPIO power management | Joey Peng |
2021-11-17 | mb/google/brya/variants/primus: Correct SSD power sequence | Casper Chang |
2021-11-17 | mb/google/brya: Move typeC AUX configuration to variant | Eric Lai |
2021-11-17 | mb/google/brya/variants/primus: enable ALC5682I-VS | Malik_Hsu |
2021-11-16 | mb/google/brya/var/redrix: Update dsm parameters for speeker/tweeter | Wisley Chen |
2021-11-16 | mb/google/brya/var/vell: Generate LP5 RAM ID | Kevin Chiu |
2021-11-15 | mb/google/brya/var/redrix: Hook up two missing sensors | Wisley Chen |
2021-11-15 | mb/google/brya/var/felwinter: Disable PCIE port 6 | Eric Lai |
2021-11-15 | mb/google/brya/var/felwinter: Remove USB2 port 0 | Eric Lai |
2021-11-15 | mb/google/brya/var/felwinter: Enable garage pen detection | Eric Lai |
2021-11-15 | mb/google/brya/variants/primus: enable RTD3 for PCIe-eMMC bridge | Malik_Hsu |
2021-11-15 | mb/google/brya/variants/gimble: Update PL1 min value | Sumeet Pawnikar |
2021-11-15 | mb/google/brya/var/kano: Add thermal sensor settings | David Wu |
2021-11-15 | mb/google/brya: Create vell variant | Shon Wang |
2021-11-13 | Revert "mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 setting" | David Wu |
2021-11-12 | mb/google/brya/var/primus: Disable autonomous GPIO power management | Casper Chang |
2021-11-11 | mb/google/brya/var/felwinter: Enable SaGv | Eric Lai |
2021-11-11 | mb/google/brya/var/kano: Configure USB2 and USB3 port | David Wu |
2021-11-11 | mb/google/brya/var/kano: Add gpio-keys ACPI node for PENH | David Wu |
2021-11-11 | mb/google/brya/var/taeko: Enable CPU PCIE RP 1 | Joey Peng |
2021-11-11 | mb/google/brya/var/gimble: Improve USB2 eye diagram of DB Type-C port | Mark Hsieh |
2021-11-11 | mb/google/brya/var/felwinter: Update typeC EC mux port | Eric Lai |
2021-11-11 | mb/google/brya/variants/gimble: Update audio setting for SmartAMP | Mark Hsieh |
2021-11-11 | ChromeOS: Replace with or add <types.h> | Kyösti Mälkki |
2021-11-09 | mb/google/brya/var/redrix: Set RFI Spread Spectrum to 6% | Wisley Chen |
2021-11-09 | ChromeOS: Fix <vc/google/chromeos/chromeos.h> | Kyösti Mälkki |
2021-11-05 | mb/google/taeko: Update the FIVR configurations | Kevin Chang |
2021-11-05 | mb/google/brya/var/felwinter: Correct typeC EC mux port | Eric Lai |
2021-11-04 | mb/google/brya/var/kano: Update GPIO table for speak and dmic | David Wu |
2021-11-02 | Revert "mb/google/brya/var/kano: disabled autonomous GPIO power management" | David Wu |
2021-11-02 | mb/google/brya: Correct AT24 NVM address size | Varshit B Pandya |
2021-11-02 | mb/google/brask: add the mkbp device | Zhuohao Lee |
2021-11-01 | mb/google/brya/var/brya0: add HPS as generic I2C peripheral | Dan Callaghan |
2021-11-01 | mb/google/brya/var/taeko: Add probe for MAX98357+ALC5682I_VS | Joey Peng |
2021-10-29 | mb/google/brya/var/brask: Correct the GPIO config of buzzer | Alan Huang |
2021-10-29 | mb/google/brya/anahera: Disable autonomous GPIO power management | Wisley Chen |
2021-10-29 | mb/google/brya/var/kano: disabled autonomous GPIO power management | David Wu |
2021-10-29 | mb/google/brya/var/kano: Add fw_config probe for MIPI camera | David Wu |
2021-10-28 | mb/google/brya/var/taeko: add HPS as generic I2C peripheral | Dan Callaghan |
2021-10-27 | mb/google/brya/var/gimble: disabled autonomous GPIO power management | Mark Hsieh |
2021-10-27 | mb/google/brya/var/kano: Disable unused PCIE root port in devicetree | David Wu |
2021-10-27 | mb/google/brask: Correct GPIO GPP_R6 and GPP_R7 setting | David Wu |
2021-10-27 | mb/google/brya/var/kano: Update the FIVR configurations | David Wu |
2021-10-25 | mb/google/brya/variants/gimble: Enable Bluetooth offload support | Mac Chiang |
2021-10-21 | mb/google/brya/var/kano: Correct GPIO GPP_R6 and GPP_R7 setting | David Wu |
2021-10-21 | mb/google/brya/var/brask: Correct SSD power sequence | David Wu |
2021-10-21 | mb/google/brya/var/kano: Enable BT offload support | David Wu |
2021-10-20 | mb/google/brya/var/redrix: Enable bt_offload support | Mac Chiang |
2021-10-20 | mb/google/brya/anahera: Add two thermal sensor setting | Wisley Chen |
2021-10-20 | mb/google/brya/anahera: Update HID to MX98360A | Wisley Chen |