summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brya/variants
AgeCommit message (Collapse)Author
2024-06-04mb/google/brya/var/xol: Enable FSP UPD LpDdrDqDqsReTrainingSeunghwan Kim
Set LpDdrDqDqsReTraining to 1 for xol. Value 0 will cause black screen issue. Reference: https://review.coreboot.org/c/coreboot/+/79527 > FSP default value for LpDdrDqDqsReTraining is 1. For boards > that didn't set LpDdrDqDqsReTraining to any value, 0 was being > assigned and it caused black screen issue. BUG=b:332980211 BRANCH=brya TEST=Built and verified there is no black screen issue during power on/off test for over 100 cycles. Change-Id: Ia346ce559b4509ea1a63abe28b12ad909f9b7b0d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82778 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-04mb/google/brask/var/bujia: change ALC5650 to ALC5682I-VSShon Wang
Due to system spec change, change audio codec ALC5650 to ALC5682I-VS BUG=b:329787697 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I38e5c58b3ef3fbe709b98601975ae3821bb77213 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-31mb/google/brya/var/nova: Update USB ports settingKenneth Chan
Update used USB port[2][3](type-a) setting for nova. BUG=b:328711879 TEST=emerge-constitution coreboot chromeos-bootimage Change-Id: I63cf97b23627feac05743f2a6e514a33fcaf7dff Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82703 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-05-31mb/google/trulo: Support OCP fault on A0/1 portsPranava Y N
The devicetree entry and gpio.c updated as per the schematics of Trulo to map the OC fault signals from A0/A1 USB ports. BUG=b:335858378 TEST= Able to build google/trulo Change-Id: Ic17debc5eecebca8c000c43a660e1b52d2932f2a Signed-off-by: Pranava Y N <pranavayn@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82637 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-05-29mb/google/nissa/var/sundance: Add WWAN power off sequenceLeo Chou
Sundance support FM101 WWAN, use wwan_power.asl to handle the power off sequence BUG=b:343139385 TEST=Build and boot on sundance Change-Id: I82085172db370ab5a6c0f77afe6042c53b89e43e Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29mb/google/nissa/var/pujjoga: Update touchscreen IC settingsRoger Wang
Modify the Goodix touchscreen from new vendor and remove 3 unused touchscreens. According to the information provided by the key-part team. BUG=b:340689681 TEST=Build and check Goodix touchscreen can work. Change-Id: I1e6349e80431aadf27cd72b8439b01f95348071d Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82427 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-29mb/google/nissa/var/sundance: Update eMMC DLL settingsRoger Wang
Currently Samsung eMMC (KLMBG2JETD-B041) can't power on to OS nomally. According to Intel provides eMMC DLL delay patch that tuning on each Sundance different eMMC system to modify some system can't boot to OS problem. BUG=b:342057438 TEST=Build and check each SKU eMMC can work. Change-Id: I29d4305bbe5f91d822d947cae942b654e80a8a57 Signed-off-by: Roger Wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82602 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Add initial devicetree.cbSubrata Banik
This patch adds initial PCI device entries into the baseboard devicetree.cb. TEST=Able to build google/trulo. Change-Id: I6ec25b98379cf7c8cbdb5be94d9f3ea43878620c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Mark unused USB ports as emptySubrata Banik
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Trulo variants to override the USB ports as per the target board design. TEST=Able to build google/trulo. Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Program EC ranges (host cmd and memory map)Subrata Banik
This patch adds chip config entries for EC host cmd and memory map ranges. TEST=Able to build Google/Trulo. Change-Id: Id4b0f3bba934c8da56b6d7ca8579b46b6cccac28 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-24mb/google/trulo: Refactor gpio pad configurationSubrata Banik
This patch tries to simplify the baseboard/variant GPIO programming for Google/Trulo. The idea is to let each variant maintain its own complete GPIO PAD configuration table instead of having a back-and-forth call between baseboard and variants. With this patch coreboot performing GPIO programming is now much simpler where the common code block calls into respective variants and gets the gpio table prior to the pad configuration. BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant) TEST=Able to build google/orisa. Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-24mb/google/nissa: Fix potential null pointer dereferenceSubrata Banik
* Introduce a null check before calling `gpio_padbased_override` in `variant_configure_pads`. * This prevents potential errors in cases where the `variant_gpio_override_table` function returns a null pointer, indicating that there are no override pads to configure. BUG=b:334826281 TEST=Able to avoid hang incase there is no GPIO override. Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/brya: Add romstage early graphics for nissaRonak Kanabar
1) Add all changes needed for early graphics 2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa The InnoLux (N156HCN-EBA C7) panel is used for the device tree. BUG=b:296433986 TEST=On-screen text message seen during MRC training on Craask Logs: [NOTE ] MRC: no data in 'RW_MRC_CACHE' [SPEW ] bootmode is set to: 0 [0.171409] DP PHY mode status not complete [0.175509] DP PHY mode status not complete [0.179799] DP PHY mode status not complete [0.184087] DP PHY mode status not complete [0.188376] DP PHY mode status not complete [0.192665] DP PHY mode status not complete [0.196954] DP PHY mode status not complete [0.201243] DP PHY mode status not complete [0.205532] DP PHY mode status not complete [0.209821] DP PHY mode status not complete [0.214110] DP PHY mode status not complete [0.218397] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/nissa/var/orisa: Generate RAM ID for Micron MT62F512M32D2DR-031 WT:BAmanda Huang
Add Micron part MT62F512M32D2DR-031 WT:B only for Orisa. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) BUG=b:337178014 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I559ed817250c40795e6c613794d4f65c636f5fc5 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82586 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brya/var/nova: Add SOLDERDOWN supportKenneth Chan
Nova will use SOLDERDOWN. Add memory.c to override baseboard. Update dram id table for correct platform parameter. BUG=b:328711879 Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brya/var/bujia: Add devicetree based on schematicsShon Wang
Add devicetree settings per the schematic. Differences to gladios: 1. remove SD reader 2. remove EMMC setting 3. modify USB port distribution FRONT ------------------------------------------------------- | A3 A1 | | C0 A2 A0 | ------------------------------------------------------- BACK ------------------------------------------------------- | --------------- | | | TX25A | | ------------------------------------------------------- BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-17mb/google/brask/var/nova: Remove unused retimerKenneth Chan
Remove unused setting for retimer. BUG=b:328711879 Change-Id: I48d8680d43a07aa3408dfbf5b25b568c2b51b343 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82475 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-16mb/google/brask/var/bujia: Update gpio tableShon Wang
Based on latest schematic to update the gpio table. BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I3d01e3b9eaef72d9e143f5163ee49d8c8f455b5f Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82412 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-15mb/google/brya: Create orisa variantEricKY Cheng
Create the orisa variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:337178014 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ORISA Change-Id: I0cd8d763ffd8864b455a7f8909e95f6aee8bb23e Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-14mb/google/nissa/var/glassway: Set VccIn Aux Imon IccMax to 25 AFrank Chu
Iccmax of VccIn_Aux is 25A with MBVR design. BUG=b:330117043 BRANCH=firmware-nissa-15217.B TEST=Local build successfully and boot to OOBE normally. Change-Id: I105dc9df53c624fd7fc697408a1097e023a3cd68 Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81445 Reviewed-by: Simon Yang <simon1.yang@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/nissa/var/quandiso: Add stop pin for G2 touchscreenRobert Chen
Add stop pin control for G2 touchscreen refer to G7500_Datasheet_Ver.1.2. BUG=b:335803573 TEST=build and verified touchscreen works normally Change-Id: I4f085c67c0cdb8b9ca3ff03993fda69cca6319ef Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82254 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/nissa/var/sundance: Update HID offset to 0x01 for Focal touchpadLeo Chou
Currently the Focal touchpad does not work. Based on the Focal touchpad vendor, upadet the HID descriptor address from 0x20 to 0x01. BUG=b:339756281 TEST=Build and check Focal touchpad can work. Change-Id: I383ad907e6a23c34ab1bd0f6594a87564e21181d Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82270 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-13mb/google/brya/var/riven: Copy VBT data file from nivviksDavid Wu
Add data.vbt file for riven recovery image. Select INTEL_GMA_HAVE_VBT for riven as it has a VBT file now. The VBT file is copied from the nivviks reference board. BUG=b:337169542 TEST=build pass Change-Id: I499c1b3e61581483a1640375270f7707ebe8deeb Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82269 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-12mb/google/brya/var/riven: Generate SPD ID for supported partsDavid Wu
Add supported memory parts in mem_parts_used.txt, and generate SPD id for these parts. 1. MT62F1G32D4DR-031 WT:B (Mircon) 2. MT62F512M32D2DR-031 WT:B (Mircon) 3. H9JCNNNBK3MLYR-N6E (Hynix) 4. K3LKLKL0EM-MGCN (Samsung) 5. K3LKBKB0BM-MGCP (Samsung) 6. H9JCNNNCP3MLYR-N6E (Hynix) BUG=b:337169542 TEST=build pass Change-Id: I0ff3b1e14fb8bb87d8fc9cbe0e177a5bcedef08c Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82255 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-06mb/google/brya/var/bujia: Add VBT data fileShon Wang
Add data.vbt files for bujia supported by brask recovery images. Select INTEL_GMA_HAVE_VBT for bujia which currently have a VBT file. changes: 1. "integrated DisplayPort with HDMI/DVI compatible" -> "Integrated HDMI/DVI". 2. turn the AUX off. BUG=b:327549688 TEST=build/boot various brya variants Change-Id: Id56461708250eaedd288ddbf788d686153df0b96 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81553 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/brya: Correct _PLD valuesWon Chung
For Mithrax and Felwinter, port C1 is on the left side and port C2 is on the right side. Correct the values accordingly. The board schematics was mirrored, so had to obtain an actual machine and physically check the correct ports. BUG=b:321051330 TEST=emerge-${BOARD} coreboot then check ACPI table on DUT Change-Id: I977c3b4081987592a1d46529eb848a07a6c4cb47 Signed-off-by: Won Chung <wonchung@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81363 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Emilie Roberts <hadrosaur@google.com>
2024-05-06mb/google/brya: Fix mux_conn index used by ec/google/chromeecWon Chung
Within ec_acpi.c, USB-C ports are iterated to be matched with corresponding mux. The iteration happens from 0 to the number of USB-C ports. Given iteration index i, the port with PLD group_token of (i+1) is matched with mux_conn[i]. Mithrax and Felwinter devicetree matches conn1 to mux_conn[1] and conn2 to mux_conn[0]. However, conn1 is for usbX_port2 which has group_token of 1 and conn2 is for usbX_port3 which has group_token of 2. Thus, follow the convention to add conn1 to mux_conn[0] and conn2 to mux_conn[1]. Otherwise, the kernel subsystem linking between Type C connector and USB mux will be swapped. BUG=b:329657774 b:121287022 b:321051330 b:204230406 TEST=emerge-${BOARD} coreboot then check ACPI table on DUT. TEST=Manually check that usb-role-switches are mapped to the correct port. Attach USB 3 A to C cable from development machine to left port of DUT. Attach nothing to right-hand port. usbpd lines are workaround for devices without firmware patch to connect superspeed lines. ectool usbpd 0 none ectool usbpd 0 usb ectool usbpd 1 none ectool usbpd 1 usb echo host > /sys/class/typec/port0/usb-role-switch/role (should succeed) echo host > /sys/class/typec/port1/usb-role-switch/role (should fail as no cable attached) Change-Id: I349682a6fe3fe4848e4e86d9c446530a31b35875 Signed-off-by: Won Chung <wonchung@google.com>, Emilie Roberts <hadrosaur@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81354 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Emilie Roberts <hadrosaur@google.com>
2024-05-06mb/google/nissa/var/sundance: Use default eMMC DLL settingLeo Chou
Configure eMMC DLL tuning values for Sundance board Samsung sku. BUG=b:337741162 TEST=Use the value to boot on Sundance successfully. Change-Id: I5f1e03c06c9f8567e757fed999730dff2551f1e0 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82173 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/brya/var/pujjoga: Add GPIO tableleo.chou
Fill GPIO table for pujjoga. BUG=b:336469694 TEST=emerge-nissa coreboot Change-Id: I3f633cf99f56d5f855015de805e16c1205c9bc99 Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82044 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-06mb/google/brya/var/xol: Override TDP PL1 valueSeunghwan Kim
Update TDP PL1 value for the DTT optimization. The new value 18W is from internal thermal/performance team. - tdp_pl1_override: 15 -> 18 (W) BUG=b:336684032 BRANCH=brya TEST=built and verified MSR PL1 value. Intel doc #614179 introduces how to check current PL values. [Original MSR PL1/PL2/PL4 register values for xol] cd /sys/class/powercap/intel-rapl/intel-rapl\:0/ grep . *power_limit* constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W) constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W) constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W) After this patch: constraint_0_power_limit_uw:18000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:114000000 Change-Id: I28c4f099e0169e8389f63083c03023dd8338589f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82151 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/brya/var/xol: Tune I2C5 timing parametersSeunghwan Kim
Update I2C5 timing parameter values to meet I2C bus spec. - fall_time_ns: 400 -> 200 BUG=None BRANCH=brya TEST=built and measure I2C5 timing parameters Before: tLOW : 1.88 us (spec >= 1.30) tHIGH: 0.57 us (spec >= 0.60) fSCL : 399.80 KHz After: tLOW : 1.60 us (spec >= 1.30) tHIGH: 0.97 us (spec >= 0.60) fSCL : 392.1 KHz Change-Id: I386b2765410fd10b8cd711f54478fb52428de5a3 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82100 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-06mb/google/nissa: Create a riven variantDavid Wu
Create the riven variant of nissa reference board by copying the template files to a new directory named for the variant. The riven variant is a twinlake platform. BUG=b:337169542 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_RIVEN Change-Id: I1be2346d87c891cc0e5fbda094e1f6e0dd60df1b Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82132 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-06mb/google/nissa/var/pujjoga: Generate SPD IDsroger2.wang
Add pujjoga supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT 2. Hynix H9JCNNNBK3MLYR-N6E, H58G56BK7BX068 3. Micron MT62F1G32D2DS-026 WT:B BUG=b:337990338 TEST=Use part_id_gen to generate related settings Change-Id: I39d44fd278474a7375ad1d2d904d14b9463ba86d Signed-off-by: roger2.wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82135 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-06mb/google/nissa/variant/pujjoga: Update devicetree settingsroger2.wang
Based on schematic of 500E_GEN4S_ADL_N_MB_0418, generate overridetree.cb settings for Pujjoga. BUG=b:337611700 TEST=FW_NAME= pujjoga emerge-nissa coreboot chromeos-bootimage Change-Id: I279f94044a22f25100a44b1abe2ef5fb6d0dd835 Signed-off-by: roger2.wang <roger2.wang@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82109 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-03mb/google/brya/var/xol: Update board type to BOARD_TYPE_ULT_ULXSeunghwan Kim
Correct .UserBd field to BOARD_TYPE_ULT_ULX from BOARD_TYPE_MOBILE. This is from Intel's guidance for MRC to map the memory speed to proper POR number. BUG=b:332980211 BRANCH=brya TEST=Built and compare the results of command 'dmidecode -t 17' [Before] (Same values in all of memory device handle) Speed: 6400 MT/s Configured Memory Speed: 6400 MT/s [After] (Same values in all of memory device handle) Speed: 5200 MT/s Configured Memory Speed: 5200 MT/s Change-Id: Id16bcbc2d0cb4c2cf3008cf2ef1027ed98e93afb Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82180 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-30mb/google/brya/var/xol: Add EC_IN_RW_OD config into early_gpio_tableSeunghwan Kim
Add GPP_F18 configuration in early_gpio_table. Without this, DUT cannot get the proper state of this signal on early phase. It allowed DUT to attempt to enter into dev mode when EC is in RW currently, it causes the failure of autotest/firmware_DevMode. BUG=b:337365524 TEST=built and run autotest firmware_DevMode Change-Id: I2179bb10b431547bc35f332c74915a63495b779d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82099 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: YH Lin <yueherngl@google.com>
2024-04-25mb/google/nissa/var/glassway: Enable Wi-Fi sar table for Intel moduleDaniel_Peng
1.Enable CHROMEOS_WIFI_SAR flag to load a SAR table for Intel module. 2.Describe the FW_CONFIG probe for the settings on glassway. - WIFI_SAR_0 for Intel Wi-Fi module AX211 BUG=336051631 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I9e43081c93ef17291c5d55cf262a0f4d1497447b Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81781 Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/brya/var/nova: Add initial configurationsKenneth Chan
Upload initial configuration for nova based on proto schematics. Memory: SAMSUNG 2G*4 K4U6E3S4AB-MGCL HYNIX 2G*4 H9HCNNNBKMMLXR-NEE BUG=b:328711879 TEST=FW_NAME=nova emerge-constitution coreboot chromeos-bootimage Change-Id: Ic9ff3ed2fb3a7f0f100385d0a0444d38fcff5c51 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-04-25mb/google/nissa/var/yaviks: Add stop pin for G2 touchscreenWisley Chen
Add stop pin control for G2 touchscreen BUG=b:335803573 TEST=build and verified Touchscreen work normally Change-Id: I7e0bbc7722cdda6bcca0485009fcf8510b1f55e2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81971 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-24mb/google/nissa/var/anraggar: Add cbj_sleeve to control mic jackJianeng Ceng
Add a new GPIO port cbj-sleeve for kernel driver to call. At the same time, a new rt5645 driver is added to replace the generic driver to parse gpio. After entering the system, it is pulled high by the kernel to enable the MIC function. BUG=None TEST=MIC function is normal Change-Id: I093be6a3e357aae389fcbe8291a9701c40b62e15 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81774 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-22mb/google/nissa/var/craaskov: modify 6W and 15W DPTF parametersIan Feng
The DPTF parameters were defined by the thermal team. Based on thermal table in 330817690#comment33. Set 6w "tcc_offset" to "15" by fw_config. BUG=b:330817690, b:290705146 BRUNCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I19100d960919dc3087fd067c24659de467eea276 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81997 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2024-04-18mb/google/nissa/var/glassway: Add SPD IDs for two new memory partsDaniel_Peng
Support Memory for Hynix H58G66AK6BX070 and Samsung K3KL9L90CM-MGCT in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign H58G66AK6BX070 4 (0100) K3KL9L90CM-MGCT 5 (0101) BUG=b:335341310 BRANCH=firmware-nissa-15217.B TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\ part_id_gen.go ADL lp5 \ src/mainboard/google/brya/variants/glassway/memory/ \ src/mainboard/google/brya/variants/glassway/memory/\ mem_parts_used.txt" Change-Id: Ic07ec36a8015ce6433196a93e894b818a515b954 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81955 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2024-04-16mb/google/nissa/variant/sundance: Modify i2c device for touch deviceLeo Chou
1. Remove non-use i2c address 0x10, 0x24 and 0x40 of touch IC for touch screen 2. Add new i2c address 0x5d of Goodix touch IC for touch screen 3. Add new i2c address 0x38 of Focal touch IC for touch pad BUG=b:333804572 TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage Change-Id: I8e2c60820a07b99b69860fd4f6557b448aef2341 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-16mb/google/nissa: Create pujjoga variantLeo Chou
Create the pujjoga variant of nissa reference board by copying the template files to a new directory named for the variant. Due to new_variant.py limitation that repo can no longer be used in inside, created this CL manually following google suggestion. BUG=b:333839287 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_PUJJOGA Change-Id: Ia8eb11eb65f9013e83abd45eefe7705d05b8697e Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81891 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-12mb/google/brya/var/sundance: Add GPIO tableLeo Chou
Fill GPIO table for Sundance. BUG=b:327520553 TEST=emerge-nissa coreboot Change-Id: I53ed5874347006985ca5231d1531fa519088f796 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81613 Tested-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-04-11mb/google/nissa/var/craaskov: Disable external fivrIan Feng
In next phase, craaskov will remove external fivr. Use the board version to config external fivr for backward compatibility and show message. BUG=b:330253778 TEST=boot to ChromeOS, cold reboot/suspend/recovery mode/install OS work normally. Change-Id: I9280a86bf78caa10b527a6569ac580dfe1d66f60 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81607 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-11mb/google/brya: Create trulo variantDinesh Gehlot
This patch adds a new variant trulo for the baseboard trulo. BUG=b:333314089 TEST=abuild -a -x -p none -t google/brya Change-Id: I91157d252ef56c8938bfc08ed0f734c5dc7e614d Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81627 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2024-04-11mb/google/brya: Add new baseboard truloDinesh Gehlot
This patch adds a new baseboard trulo. This commit is a stub which only adds the minimum code needed for a successful build. BUG=b:333314089 TEST=abuild -a -x -p none -t google/brya Change-Id: Iad6230064c6b8359698d37c3e0440614cc7b073d Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-10tree: Drop unused <stdio.h>Elyes Haouas
Change-Id: I26c2abfce3417ed096d945745770fcae91a1e4ad Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81814 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-09tree: Drop unused <console/console.h>Elyes Haouas
Change-Id: Ib1a8fc50217c84e835080c70269ff50fc001392c Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81811 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-04mb/google/nissa/variant/sundance: Update devicetree settingsLeo Chou
Based on schematic and gpio table of sundance, generate overridetree.cb settings for sundance. BUG=b:328505938 TEST=FW_NAME=sundance emerge-nissa coreboot chromeos-bootimage Change-Id: I857be7bc7f98281cac57fef85bf9f3cef2ec14e9 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81653 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-04mb/google/nissa/var/gothrax: Add touchscreen driver for ILI2901A-A210Yunlong Jia
I2C slave addresses 0x41. BUG=b:332458912 BRANCH=None TEST=emerge-nissa coreboot & working correctly in DUT Change-Id: I2d26bfd4f415aa128b6256f83bc58987b15a557a Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81610 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-04mb/google/brya/var/xol: Reduce power limits according to battery statusSeunghwan Kim
When battery level is below critical level or battery is not present, cpus need to run with a power optimized configuration to avoid platform instabilities such as system power down. This will check the current battery status and configure cpu power limits using current PD power value. BUG=b:328729536 BRANCH=brya TEST=built and verified MSR PL2/PL4 values. Intel doc #614179 introduces how to check current PL values. [Original MSR PL1/PL2/PL4 register values for xol] cd /sys/class/powercap/intel-rapl/intel-rapl\:0/ grep . *power_limit* constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W) constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W) constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W) [When connected 60W adapter without battery] Before: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:114000000 After: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:60000000 [When connected 45W adapter without battery] Before: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:55000000 constraint_2_power_limit_uw:114000000 After: constraint_0_power_limit_uw:15000000 constraint_1_power_limit_uw:45000000 constraint_2_power_limit_uw:45000000 Change-Id: I5d71e9edde0ecbd7aaf316cd754a6ebcff9da77d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81614 Reviewed-by: Jamie Chen <jamie.chen@intel.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-04mb/google/nissa/var/anraggar: Set EN_SPK_PA to low to avoid noiseJianeng Ceng
In order to avoid the noise caused by the codec output to the audio jack during the shutdown and poweron process, we will use GPP_A11 for the codec power supply gate, keep low during the startup process, and wait for the driver to turn on. This change does not affect the beep output of depthcharge. BUG=None TEST=There is no squeaking sound when turning on and off Change-Id: I5982be5a8d965086b46861f4c2c758d9bdee6e75 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81629 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-02mb/google/brya: Make get_soc_power_limit_config() a public functionSeunghwan Kim
Make get_soc_power_limit_config() a public function to use on brya variants. Add prefix 'variant_' for it. BUG=None BRANCH=brya TEST=emerge-brya coreboot Change-Id: I31f938938e7c9da49c2aa7b52dd4b5f46f793495 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81616 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-02mb/google/nissa/var/sundance: Generate SPD ID for 4 supported memory partsLeo Chou
Add sundance supported memory parts in mem_parts_used.txt, generate SPD id for this part. 1. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT 2. Hynix H58G56AK6BX069, H9JCNNNBK3MLYR-N6EE BUG=b:332201349 TEST=Use part_id_gen to generate related settings Change-Id: Ieece88b0b2b2ea5f0d6192ee8441e50d3f22a972 Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81612 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-01mb/google/{brya,hades}: use soc index for variant_update_power_limits()Seunghwan Kim
The power_limits_config variable for ADL/RPL is array data, but we got soc_power_limits_config variable without its index. So correct the code to get the proper pointer of the data for current CPU SKU. I tried to override the PL4 value to 80W from 114W with following table in ramstage.c as a test for bug b/328729536. ``` const struct cpu_power_limits limits[] = { {PCI_DID_INTEL_RPL_P_ID3, 15, 6000, 15000, 55000, 55000, 80000}, } ``` And then verified the msr_pl4 value on ChromeOS using Intel PTAT tool. - Before this patch: msr_pl4 was not changed, it's always 114 - After this patch: msr_pl4 was changed to 80 BUG=None BRANCH=None TEST=Built and tested the function could adjust PL4 on xol in local. Change-Id: I9f1ba25c2d673fda48babf773208c2f2d2386c53 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81436 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-01mb/google/brya/var/xol: Update GPIO settings for speaker and DMICSeunghwan Kim
Update GPIO configuration according to the schematic changes. The locations of speaker and DMIC are swapped. - Speaker: I2S2 -> I2S1 - DMIC: GPP_S2/GPP_S3 -> GPP_R4/GPP_R5 BUG=b:318584606 TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I3468d79f33d9d9ef8377ccf0f8f628956b02d3c3 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81444 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-01mb/google/nissa/var/glassway: Add 2nd Synaptics touchpadFrank Chu
Add Synaptics touchpad via HID-I2C interface in I2C5 bus for glassway. BUG=b:331677400 BRANCH=firmware-nissa-15217.B TEST=emerge-brya coreboot and check touchpad function work. [INFO ] input: PNP0C50:00 06CB:CE9B Touchpad as /devices/pci0000:00/0000:00:19.1/i2c_designware.5/i2c-17/i2c-PNP0C50:00/0018:06CB:CE9B.0001/input/input4 [INFO ] hid-multitouch 0018:06CB:CE9B.0001: input,hidraw0: I2C HID v1.00 Device [PNP0C50:00 06CB:CE9B] on i2c-PNP0C50:00 Change-Id: Ifbb2cb750a80bc6e8f96609257dcd1e695ad1fa4 Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-04-01mb/google/nissa: Create sundance variantLeo Chou
Create the sundance variant of nissa reference board by copying the template files to a new directory named for the variant. Due to new_variant.py limitation that repo can no longer be used in inside, created this CL manually following google suggestion. BUG=b:328505938 TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_SUNDANCE Change-Id: Ia8ba318f18d2cac69898687311631778e61bf2ea Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81347 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com>
2024-03-30mb/google: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: If68303cd59b287c8a5c982063b2ab75fd74898d6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-03-27mb/google/nissa/var/anraggar: Modify the GPP_F15 of pen to EDGE_BOTHQinghong Zeng
Currently, simply changing the wake event configuration to ANY does not completely resolve the issue of inserting a pen not waking the system. The pen actually needs to wake up the system both when plugged in and when pulled out. This is because in the pen's GPP_F15 configuration, the original attribute is EDGE_SINGLE, which should be changed to EDGE_BOTH. BUG=b:328351027 TEST=insert and remove pen can wakes system up. Change-Id: I1823afd0bcb86804227117d2d5def38788bc7387 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81441 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-27mb/google/brya: Create yavista varianthsueh.rasheed
Create the yavista variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:321583226 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_YAVISTA. Change-Id: I6fa464a4dcd9551a42e8746e64c724b3582dbe02 Signed-off-by: Hsueh Rasheed <hsueh.rasheed@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80342 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-22mb/google/nissa/var/anraggar: Update touchscreen enable pin to GPP_C0Qinghong Zeng
Assign GPP_C0 and enable only the touchscreen. Before modification, GPP_C0 supplies power to the touchscreen and sensor at the same time. Now the hardware circuit has been modified, GPP_C0 supplies power to the touchscreen alone. After the software is synchronously modified, when the device enters suspend(S0ix), GPP_C0 will not enable VDD, which can reduce the standby power consumption of the touchscreen when it is suspended(S0ix), which is about 2.1mW. BUG=b:304920262 TEST= touchscreen function workable Change-Id: Ia06209aa8303be4fc0669c5d6e5d7a06e8e9ab99 Signed-off-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81265 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-03-19mb/google/nissa/var/craaskov: Update eMMC DLL settingsIan Feng
Update eMMC DLL settings based on Craaskov board. BUG=b:318323026 TEST=executed 2500 cycles of cold boot successfully on all eMMC sku Change-Id: I56f8329c28261c2bcae9d058da929be6763b293c Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81304 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Yang <simon1.yang@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-19mb/google/nissa/var/glassway: Tune I2C timings for 400 kHzFrank Chu
Update touchpad and touchscreen I2C timing. - Data hold time: 300ns - 900ns BUG=b:328724191 BRANCH=firmware-nissa-15217.B TEST=Check wave form and met the spec. I2C1 (touchscreen) Hold time from 83.58ns to 413.87ns I2C5 (touchpad) Hold time from 95.93ns to 425.27ns Change-Id: I65fb1298f9e96ab0b63aba436f6a319f21b38925 Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81136 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Shawn Ku <shawnku@google.com>
2024-03-19mb/google/nissa/var/glassway: Adjust touchscreen power sequencingFrank Chu
Adjust touchscreen power sequencing for eKTH5015M. The INX touch panel (eKTH5015M) contains a pull-up register which causes TCHSCR_REPORT_EN pull-up abnormally from Z1 power on.Because the t25 must be at least greater than 20ms, TCHSCR_REPORT_EN is initialized to GPO_L in the early stage (romstage) to meet the spec. BUG=b:328170008 BRANCH=firmware-nissa-15217.B TEST=Build and check I2C devices timing meet spec. [INFO ] input: Elan Touchscreen as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-ELAN0001:00/input/in4 Change-Id: I50f9c21ddee2bc9c1d313f63049cb587b4ae047a Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81135 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-17mb/google/nissa/var/anraggar: Add pen insert/remove for wakeupJianeng Ceng
Currently, inserting the pen does not wake the system, only removing the pen does. This is caused by the wake event configuration being DEASSERTED, so change it to ANY. BUG=b:328351027 TEST=insert and remove pen can wakes system up. Change-Id: Icdea995c2be04ea459e985f79269e49faf88248d Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81102 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Shou-Chieh Hsu <shouchieh@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com>
2024-03-17mb/google/brya: Create bujia variantShon Wang
Create the bujia variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:327549688 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_BUJIA Change-Id: I453a50f1aa64f8d4119bf0f860d928aa3e00a144 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81198 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kevin Chiu <kevin.chiu.17802@gmail.com>
2024-03-15mb/google/brya/var/xol: Modify clkreq to clksrc mapping for NVMeSeunghwan Kim
NVMe using clk_src[0] and clk_req[1] mapping to hardware design, Due to inconsistency between PMC firmware and FSP, we need to set clk_src to clk_req number, not same as hardware mapping in coreboot. Then swap correct setting to clk_src=0,clk_req=1 in mFIT. BUG=b:328318578 TEST=build firmware and veirfy suspend function on NVMe SKU DUT. Cq-Depend: chrome-internal:7063434 Change-Id: I1777310782a0f4417bd1bb21287bec5852be966e Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81230 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-14mb/google/nissa/var/glassway: Add 2nd touchscreen via SSFC configFrank Chu
Define SSFC bit 0-1 in coreboot for add 2nd BOE G7500 touchscreen. BUG=b:329339069 BRANCH=firmware-nissa-15217.B TEST=Check touchscreen can detect and function work. [INFO ] input: GTCH7503:00 2A94:A804 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-10/i2c-GTCH7503:00/0014 Change-Id: I85688919864e3cac1beb2442ef3e23fe9d5f916c Signed-off-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-13mb/google/brya/var/omniknight: Pull down USI_REPORT_EN in romstageJamie Chen
Pull down USI_REPORT_EN(GPP_C6) in romstage to solve an abnormal peek pull high before BL_EN. Because power sequence no meet spec, pre #comment36, it may have ghost touch. BUG=b:326337003 TEST=FW_NAME=omnigul emerge-brya coreboot, measurement of HW and test touch detection by evtest Change-Id: I66f4a7915f135927fbc0a16254dece202dfc23a2 Signed-off-by: Jamie Chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80769 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2024-03-11mb/google/brya: Create nova variantDavid Wu
Create the nova variant of the brask reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:328711879 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_NOVA Change-Id: Ie1cee43f0e2545288130bcc5152075603695c395 Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81132 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
2024-03-09mb/google/brya/var/xol: Disable unused controllersSeunghwan Kim
Disable unused controllers in overridetree.cb by referring to xol proto2 schematics. Enabling unused controllers blocks entering s0ix. - I2C3 - SATA - PCIE RP8 - PCIE RP9 - GSPI1 BUG=b:328318578 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I1be7caf8234c32406aa2cff8fc7fe9fa39b16d89 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81105 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-09mb/google/brya/var/xol: Update psys_pmax value to 122WSeunghwan Kim
Update psys_pmax value to 122 from 145. This value is from internal power team. BUG=None BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I8bc58343d5736e2457db006972dc229e16d3fe59 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81104 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-09mb/google/brya/var/xol: Configure Acoustic noise mitigationSeunghwan Kim
Enable Acoustic noise mitigation for xol. The setting values are from internal power team. - Enable Acoustic noise mitigation - Set slow slew rate VCCIA and VCCGT to SLEW_FAST_4 - Set FastPkgCRampDisable VCCIA and VCCGT to 1 BUG=None TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I6165ae6ca73d1467a1d2cc7bd545298bd4c2f54f Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81103 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-03-06mb/google/nissa/var/glassway: Tune eMMC DLL valuesDaniel Peng
Update eMMC DLL values to improve initialization reliability. BUG=b:327123701 TEST=Improve reboot on MB with eMMC smoothly. Change-Id: Ice9ee217acf7dc6e3e704bc82529e0b9a8faf184 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80779 Reviewed-by: Shawn Ku <shawnku@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Simon Yang <simon1.yang@intel.com>
2024-03-05mb/google/brya/var/xol: Add VGPIO configurations for PEG60Seunghwan Kim
Add VGPIO configurations for NVMe on PEG60. BUG=b:326481458, b:372086400 BRANCH=firmware-brya-14505.B TEST=Verified DUT could detect NVMe. Install ChromeOS into NVMe and boot from it. Change-Id: I5520dc2a4bf6e788701a774674d223b7e8ad5b44 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81033 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-05mb/google/nissa/var/gothrax: Add probe and GPIO config for touchpanelYunlong Jia
Add FW_CONFIG probe to separate touch panel settings. TOUCH_PANEL_ENABLE/TOUCH_PANEL_DISABLE Use different gpio tables based on the value of TOUCH_PANEL. BUG=b:325987249 TEST=emerge-nissa coreboot and run in DUT Change-Id: I23c62406a932815ff1cfafe05b70468b1f9cca54 Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80850 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kyle Lin <kylelinck@google.com>
2024-03-05mb/google/brya/var/dochi: Add wifi sar tableMorris Hsu
Add wifi sar table for dochi BUG=b:326137130 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot chromeos-bootimage Change-Id: Iaf90756eb318bef1ffcda9368a976c0ca209a100 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-04mb/google/brya/var/xol: Update NVMe clock source index to 0Seunghwan Kim
Change ClkSrc index for NVME to 0 from 1 by referring to proto2 schematics. BUG=b:326481458 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I7ea1cd7d8e16d4cee953e931d2f1829eae7d1978 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80768 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-03-01mb/google/nissa/var/glassway: Add GPIO tableDaniel Peng
Refer to the reference board of nivviks, and update GPIO settings via glassway schematic of ca24a_r10_240108_v3_mb_gsen_gmr.pdf. BUG=b:319071869 BRANCH=firmware-nissa-15217.B TEST=Local build successfully and boot to OOBE normally. Change-Id: I0de743746160c6eb081cb9a061ac1703b01ba5b4 Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-28mb/google/brya/var/xol: Add storage option in FW_CONFIGSeunghwan Kim
Add STORAGE config in FW_CONFIG to support NVME sku. - STORAGE_UFS : 0 - STORAGE_NVME: 1 BUG=b:326481458 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: Id8316f643ba9a55319b67431a24a507e92419aa7 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80767 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-02-27mb/google/nissa/var/glassway: Add initial override devicetreeDaniel Peng
Refer to the reference board of nivviks, and update devicetree settings via glassway schematic of ca24a_r10_240108_v3_mb_gsen_gmr.pdf. BUG=b:319071869 BRANCH=firmware-nissa-15217.B TEST=Local build successfully and boot to OOBE normally. Change-Id: Ibbb10a373bd5fa52a0833b81133517d2a088536b Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80742 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-22mb/google/nissa/var/glassway: Generate SPD ID for supported memory partsDaniel Peng
Add supported memory parts in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign K3KL8L80CM-MGCT 0 (0000) K3KL6L60GM-MGCT 1 (0001) H58G56AK6BX069 2 (0010) H9JCNNNBK3MLYR-N6E 3 (0011) BUG=b:319071869 BRANCH=firmware-nissa-15217.B TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\ part_id_gen.go ADL lp5 \ src/mainboard/google/brya/variants/glassway/memory/ \ src/mainboard/google/brya/variants/glassway/memory/\ mem_parts_used.txt" Change-Id: I00ae3efe8e554f44cee5a27ac88c5d65eb95f7fb Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2024-02-21mb/google/brya/var/xol: Add support memory partsSeunghwan Kim
Add support memory parts for Xol. - Samsung K3KL6L60GM-MGCT - Samsung K3KL8L80CM-MGCT BUG=b:319506033 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Proto board can boot to ChromeOS. Change-Id: Ic6a36e40f0f93109f296c5cc67a368ace81bd217 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80637 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-02-21mb/google/brya/var/xol: Update memory configurationSeunghwan Kim
Update memory configuration following proto schematics. BUG=b:319506033 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Proto board can boot to ChromeOS. Change-Id: I59aabe0870317092f59701bdf88b53bf9731377a Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-21mb/google/brya/var/xol: Update thermal policySeunghwan Kim
Update initial DTT policy and TCC setting for Xol. The setting values are from internal power team. - Critical CPU temparature: 105 -> 99 - TCC offset: 90 -> 94 BUG=b:323989520 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage Change-Id: I546b313a1e6af16029309174a5bed2d1e4aa4d11 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80410 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-02-21mb/google/nissa/var/anraggar: Change tdp_pl1_override from 6 W to 15 WWeimin Wu
Set tdp_pl1_override to 15 for performance required by the thermal team. Fix policies.critical index from 2 to 0. BUG=b:313833488 TEST=emerge-nissa coreboot Change-Id: I5341bd3d4842f9298a2f5d9e589918bb1b06ba69 Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-21mb/google/brya: Create glassway variantDaniel Peng
Create the glassway variant of the nivviks reference board by copying the template files to a new directory named for the variant. BUG=b:319071869 BRANCH=firmware-nissa-15217.B TEST=None Change-Id: I597666a5be6f71b82c7baddbe343da3d5117dd1c Signed-off-by: Daniel Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80636 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-13mb/google/*: Replace use of gfx/generic addr field with display typeMatt DeVillier
Eliminates the use of a magic number, and the resulting DID entry in the _DOD method is the same. TEST=build/boot google/drallion, dump SSDT and verify DID entry is unchanged. Change-Id: Ic929cf7ec6849ba398653226bbe46d27b4e3fa81 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-02-13mb/google/brya/var/*: Use name 'LCD0' for internal panel outputMatt DeVillier
The GMA driver generates the brightness controls expecting the name LCD0, so we need to use it here as well so that the DSDT and SSDT parts match. TEST=build/boot Win11 on google/brya (redrix), verify brightness controls are functional. Change-Id: I389553b2ddc5b09d165229e2d8066cacf852b82c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80174 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Won Chung <wonchung@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-09mb/google/nissa: Skip GPP_F15 GPIO locking to avoid IRQ stormWeimin Wu
There is an existing issue for nissa where wake up from RTC wake is not working during suspend_stress_test. The phenomenon of the issue is that after pulling out the stylus, can see an interrupt storm occurs, checking through: "cat /proc/interrupts | grep acpi". When the counter of interrupt is greater than a certain value, "Disabling IRQ #9" will occur, so RTC wake is not working. Reference: https://review.coreboot.org/c/coreboot/+/65086 This patch skips the locking for GPP_F15 to allow kernel to configure it later. The interrupt storm of acpi disappears. BUG=b:321348117 TEST=1. cat /proc/interrupts | grep acpi there isn't interrupt storm of acpi when pulling out stylus. 2. The stylus tools panel will pop up when pulling out it. 3. Inserts stylus can wakeup DUT after powerd_dbus_suspend. 4. Passed: suspend_stress_test -c 2500 --suspend_min=15 --suspend_max=20 Change-Id: Ie143c43e0555d17d8a290f17637b537fba806144 Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80316 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-09mb/google/nissa/var/anraggar: Config DP AUX BIAS according to fw_configWeimin Wu
EVT mini-build changes redriver IC from PS8745 to ANX7493, the ANX7493 not support DP AUX BIAS, so connects DP AUX BIAS of DB to SOC directly. Add DB_AUX_BIAS bit field to fw_config for compatibility. BUG=b:320235566 TEST=DP function of MB and DB workable Change-Id: I53974ec7444912a63d0fe0a9303c9e5d6941f68d Signed-off-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80259 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-07mb/google/brya/var/xol: Update GPIO configurationsSeunghwan Kim
Upload initial GPIO configuration for xol based on proto schematics. BUG=b:319506033 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot chromeos-bootimage xol proto board can boot to ChromeOS Change-Id: I224e58628e44571c07ce034136d690587e62be08 Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80325 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-07mb/google/brya/var/xol: Update Kconfig and devicetreeSeunghwan Kim
Upload the initial devicetree and update Kconfig for xol following proto schematics. BUG=b:319506033 BRANCH=firmware-brya-14505.B TEST=FW_NAME=xol emerge-brya coreboot Change-Id: I411932eb4872d77993394a290e8afdd1a0038faf Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80324 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-01-27mb/google/nissa/var/anraggar: Enable BT audio offloadJianeng Ceng
This patch enables Cnvi BT Audio Offload feature and also configures the virtual GPIO for CNVi Bluetooth I2S pads. BUG=b:303157827 TEST=Build and boot to anraggar. Verify the config from serial logs. w/o this CL - ``` [SPEW ] -- CNVi Config -- [SPEW ] CNVi Mode= 1 [SPEW ] Wi-Fi Core= 1 [SPEW ] BT Core= 1 [SPEW ] BT Audio Offload= 0 [SPEW ] Pin Muxing ``` w/ this CL - ``` [SPEW ] -- CNVi Config -- [SPEW ] CNVi Mode= 1 [SPEW ] Wi-Fi Core= 1 [SPEW ] BT Core= 1 [SPEW ] BT Audio Offload= 1 [SPEW ] Pin Muxing ``` Change-Id: I9e6731c8ceaad6ee58b525d4246fa769bfe1b0c7 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80001 Reviewed-by: Weimin Wu <wuweimin@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-27mb/google/brya/var/omniknight: Add WIFI SAR tablejamie_chen
Add WIFI SAR table for omniknight. BUG=b:320172979 TEST=FW_NAME=omnigul emerge-brya coreboot Change-Id: I70e79577612b3d5c4dc0f92211f87cbea0532d5d Signed-off-by: jamie_chen <jamie_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80152 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2024-01-25mb/google/brya/var/*: Ensure LCD device has a valid addressMatt DeVillier
Some variants added the generic gfx driver with an LCD device without specifying the address, which is required for the backlight controls to be functional under Windows. Add the address value where missing. Address value used (0x80010400) is same as on other Brya variants which did properly set it, and is taken from the ACPI 6.5 spec section B.4.2, _DOD (display output device enumeration), table B-2: - bit 31 = use the ACPI-defined (vs vendor-defined) bit scheme for bits 15-0 - bit 16 = platform firmware can detect the device - bit 10 = display type is internal/integrated flat panel (aka LCD) TEST=build/boot Win11 on google/brya (osiris), verify ACPI backlight controls functional. Change-Id: Id24e330cfb7c993d12665a704e1ca78e2e38874f Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80062 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-01-24mb/google/brya/var/pujjo: Add i2c device for Parade touch screenleo.chou
Add new i2c address 0x24 of touch IC for Parade touch panel. BUG=b:320731709 Test=emerge-nissa coreboot Change-Id: I51bd89beffd912fc147da11d19f38cb44cbe570a Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80024 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 16:10:12 +0000