Age | Commit message (Expand) | Author |
2024-02-13 | mb/google/*: Replace use of gfx/generic addr field with display type | Matt DeVillier |
2024-02-13 | mb/google/brya/var/*: Use name 'LCD0' for internal panel output | Matt DeVillier |
2024-01-25 | mb/google/brya/var/*: Ensure LCD device has a valid address | Matt DeVillier |
2023-10-31 | mb/google/brya/var/*: Mark fingerprint reader as hidden | Matt DeVillier |
2023-08-24 | mb/google/brya/var/kano: Add new GFX devices with custom _PLD | Won Chung |
2023-08-09 | mb/google/brya: Use runtime detection for touchscreens | Matt DeVillier |
2023-05-04 | mb/google/brya: Add SOF chip driver | Matt DeVillier |
2023-04-02 | soc/intel/alderlake: Add ADL-P 4+4 with 28W TDP | Patrick Rudolph |
2023-02-06 | mb/google/brya/var/kano: Update ELAN TS delay time to 150ms | David Wu |
2023-01-15 | drivers/i2c/generic: Drop 'disable_gpio_export_in_crs' flag | Matt DeVillier |
2023-01-08 | mb/google/brya/var/kano: Set the ov2740 to 0 and the hi556 to 1 for SSFC | David Wu |
2022-12-27 | mb/google/brya/var/kano: Enable Fast VMode for kano | David Wu |
2022-12-24 | mb/google/brya/var/zydron: Use SSFC for mipi instead of fw_config | David Wu |
2022-12-22 | mb/google/brya: update ACPI HID/CID for Synaptics touchpads | Matt DeVillier |
2022-11-08 | mb/google/brya/var/kano: Add mipi hi556 camera support | David Wu |
2022-09-09 | mb/google/brya: Invoke power cycle of FPMCU on startup | Tarun Tuli |
2022-09-09 | mb/*/{device,override}tree: Set touchpads to use detect (vs probed) flag | Matt DeVillier |
2022-07-04 | mb/google/brya/var/kano: Disable PCH USB2 phy power gating | David Wu |
2022-05-28 | mb/google/brya/var/kano: Correct _PLD values | Won Chung |
2022-04-14 | mb/google/brya/var/kano: Configure Acoustic noise mitigation | David Wu |
2022-03-30 | mb/google/brya/var/kano: Remove SAR sensor | David Wu |
2022-03-30 | Revert "mb/google/brya/var/kano: adjust I2C3 speed" | David Wu |
2022-03-15 | soc/intel/adl/chip.h: Convert all camel case variables to snake case | MAULIK V VAGHELA |
2022-03-09 | mb/google/brya/var/kano: Update TDP PL1, PL2, and PL4 for U28 SKUs | David Wu |
2022-02-28 | mb/google/brya/var/kano: add enable_off_delay_ms to 30 | David Wu |
2022-02-18 | mb/google/brya/var/kano: Use ACPI _PLD macro | Subrata Banik |
2022-02-18 | mb/google/brya/var/kano: Fix PLD group order | Subrata Banik |
2022-02-09 | mb/google/brya: Add custom PLD fields to devicetree for brya variants | Won Chung |
2022-02-07 | mb/google/brya/var/kano: adjust I2C3 speed | David Wu |
2022-01-26 | mb/google/brya/var/kano: Reduce reset delay time to 20ms for ELAN TS | David Wu |
2022-01-21 | mb/google/brya/var/kano: Prevent camera LED blinking during boot | Jim Lai |
2022-01-17 | mb/google/brya/variants/*: Add cpu pcie rp flags | Tracy Wu |
2022-01-04 | mb/google/brya/var/kano: Add stylus probe | David Wu |
2021-12-23 | drivers/intel/pmc_mux/conn: Change usb{23}_port_number fields to device pointers | Reka Norman |
2021-12-20 | mb/google/brya/var/*: Add disable_gpio_export_in_crs to all devicetrees | Tim Wawrzynczak |
2021-11-30 | mb/google/brya/var/kano: Enable USB2 port 9 for BlueTooth | David Wu |
2021-11-26 | mb/google/brya/var/kano: swap TPM i2c with TS i2c for the next build phase | David Wu |
2021-11-25 | mb/google/brya/var/kano: Update thermal table | David Wu |
2021-11-22 | mb/google/brya: Move cr50 configuration to variant | David Wu |
2021-11-15 | mb/google/brya/var/kano: Add thermal sensor settings | David Wu |
2021-11-11 | mb/google/brya/var/kano: Configure USB2 and USB3 port | David Wu |
2021-11-11 | mb/google/brya/var/kano: Add gpio-keys ACPI node for PENH | David Wu |
2021-11-02 | Revert "mb/google/brya/var/kano: disabled autonomous GPIO power management" | David Wu |
2021-10-29 | mb/google/brya/var/kano: disabled autonomous GPIO power management | David Wu |
2021-10-29 | mb/google/brya/var/kano: Add fw_config probe for MIPI camera | David Wu |
2021-10-27 | mb/google/brya/var/kano: Disable unused PCIE root port in devicetree | David Wu |
2021-10-27 | mb/google/brya/var/kano: Update the FIVR configurations | David Wu |
2021-10-04 | mb/google/brya/variants/kano: Correct MIPI camera info | Lai, Jim |
2021-10-01 | mb/google/brya/var/kano: Add Synaptics touchpad | David Wu |
2021-09-27 | mb/google/brya/var/kano: Move max98373 amp ACPI info to I2C0 | David Wu |
2021-09-24 | mb/google/brya/var/kano: Enable SaGv support | David Wu |
2021-09-20 | mb/google/brya: Switch to using device pointers using alias names | Furquan Shaikh |
2021-09-16 | mb/google/brya/variants/kano: Add MIPI camera support | David Wu |
2021-09-11 | mb/google/brya: Replace white space with tab | Subrata Banik |
2021-08-24 | mb/google/brya/variants/kano: Init devicetree for kano | David Wu |
2021-07-12 | mb/google/brya: Create kano variant | David Wu |