summaryrefslogtreecommitdiff
path: root/src/mainboard/google/brox
AgeCommit message (Collapse)Author
2024-08-22mb/google/brox/var/jubilant: Enable devices on unprovisioned fw_configRen Kuo
Add the condition of unprovisioned fw_config to enable all storages and devices. It's for first boot on all storags and preliminary test in factory when fw_config is unprovisioned. BUG=None TEST=Build jubilant firmware and boot to OS on storages when fw_config is unprovisioned and ensure all devices are enable. Change-Id: Ia14632744c34548e2c201dfc58d82515cdd02df0 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/84002 Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-22mb/google/brox: Enable storage devices on unprovisioned fw_configKarthikeyan Ramasubramanian
Storage devices are very critical to boot to OS. When probe list is defined for storage devices, all of them get disabled when fw_config is unprovisioned - a typical situation in the factory. Fix this by configuring the storage devices in device/override tree to probe and enable them when fw_config is unprovisioned. BUG=None TEST=Build Brox firmware and boot to OS when fw_config is unprovisioned. Change-Id: I0537f7d1d83293b9b3408f0aadf11fa2e7908163 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83984 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-21mb/goog/brox: unlock gpio wake sourcesNick Vaccaro
The power off code in depthcharge disables all GPEs prior to power off. The problem is that for gpio wake sources that are locked, this power off code cannot successfully clear any pending interrupt from that source. This can result in the device incorrectly waking back up after it's been powered off from the firmware dev screen. BUG=b:360380950, b:359692570 BRANCH=None TEST=verify brox DUT is able to power down and stay powered down when selecting the "Power off" button in the firmware dev screen. Change-Id: I5cd36640677996209beb8fe29f522ff8e07ebf00 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83951 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-08-19mb/google/brox/jubilant: Update fw_configMorris Hsu
Change STORAGE_UNPROVISIONED to STORAGE_UNKNOWN depend on depthcharge setting. BUG=None TEST=emerge-brox coreboot Set STORAGE_UNKNOWN on jubilant, check that NVMe and UFS can boot. Change-Id: I4cfd7322c2940862dfbae46e85522715cd7534c1 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83935 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Bob Moragues <moragues@google.com>
2024-08-15mb/google/brox/jubilant: Disable devcies and GPIOs by fw_configMorris Hsu
1.Set unused device's GPIOs to NC based on fw_config. 2.Disable config for nvme, ufs and CNVi based on fw_config. 3.Add fw_config STORAGE_UNKNOWN to enable all storages for the first boot in factory. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge check fw_config messages in ap log verify devices on/off by fw_config on jubilant Change-Id: I8d9f4edea454e0861f91261bf13fa80572d0a181 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-14mb/google/brox: Remove Mainboard Prepare to Sleep(MPTS) ACPI methodKarthikeyan Ramasubramanian
Brox does not have PCIe WWAN or discrete GPU. Hence no need to power them off during suspend. Hence also remove the MPTS ACPI method. BUG=None TEST=Build Brox firmware and boot to OS. Change-Id: Ia239c3f038ce31934efb0a391350fa0f786e3fcd Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83788 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-13mb/google/brox: Do not override GPIO PMKarthikeyan Ramasubramanian
Brox uses Ti50 which always supports long interrupt pulse. Hence no need to override GPIO PM. BUG=None TEST=Build Brox firmware and boot to OS. Perform suspend/resume for 25 cycles. Change-Id: I6a138c1953714bc29570db587594cab8f315a4ec Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83856 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11tree: Use boolean for pch_hda_sdi_enable[]Elyes Haouas
Change-Id: I27568d1205216f697b48ffb09ce5208505718978 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83863 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brox/jubilant: update overridetree for dptf settingsMorris Hsu
Update dptf settings for EVT. BUG=None TEST=emerge-brox coreboot chromeos-bootiamge Change-Id: Iadc95c14da6f879e25dac4804907e340dc16e47f Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83842 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-11mb/google/brox/jubilant: update overridetreeMorris Hsu
Update touchpad settings. BUG=b:342867386 TEST=ensure touchpad is working. Change-Id: Ibf62470b7fd921065201894a63d7e2a83dad53ce Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
2024-08-09mb/google/brox/jubilant: Add Fn key scancodeMorris Hsu
The Fn key on jubilant emits a scancode of 94 (0x5e). BUG=b:324079605 TEST=Flash jubilant, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I963b0aa85598097fea69ec34d1e79ec0bbec3db3 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83821 Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-08-09mb/google/brox/var/jubilant: Add SAR sensor SX9324Ren Kuo
Add SAR Sensor SX9324 for WWAN: - Apply DRIVERS_I2C_SX9324 - Config GPP_H19 for IRQ - Add SX9324 registers settings based on tuning value from SEMTECH. Refer to datasheet: https://chromeos.google.com/partner/dlm/avl/component/3624/ BUG=b:345327104 TEST=Build and verify on jubilant Change-Id: I629117f20ca513dc0c8eaa91744ad33e162ba4bb Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83779 Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-09mb/google/brox/var/lotso: Enable wifi sarKun Liu
wifi.SetTXPower test fail, so enable wifi sar. BUG=b:351698478 TEST=emerge-brox coreboot Change-Id: Ibf5425e72eddc45e376ef4e2d077180dab502200 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83793 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-07mb/google/brox: Tune Touchpad I2C parametersKarthikeyan Ramasubramanian
Adjust Touchpad I2C fall time configuration such that it meets the I2C fast mode specification(<= 400KHz). BUG=b:328670295 TEST=Build Brox firmware and boot to OS. Confirm the I2C bus frequency(375 KHz), rise(650 ns) and fall(330 ns) times meet the specification. Change-Id: I0006bfb9bb5839ffa1248d9f2ea055160ed0936e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83755 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2024-08-06mb/google/brox/var/jubilant: Update WWAN and UsbCam SettingsRen Kuo
Update GPIOs for WWAN and USB Camera functions. BUG=b:341188351 TEST=Build and verify on jubilant Change-Id: I145aa994767ddc59be519b96017af71badf82734 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83766 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2024-08-05mb/google/brox: Add model brox-ti-pdcBob Moragues
BRANCH=None BUG=b:348171026 TEST=Test on TI PDC device Cq-Depend: chromium:5691079 Cq-Depend: chromium:5691080 Cq-Depend: chrome-internal:7464767 Original-Change-Id: I6ffb8bdb2245a74b0d5270435d0ffc8a44e7c2a6 Original-Signed-off-by: Bob Moragues <moragues@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/c/chromiumos/third_party/coreboot/+/5691110 Original-Reviewed-by: YH Lin <yueherngl@chromium.org> Change-Id: Iac5b4cd4dcb1d274553f78e9d4295f8f9ad8a863 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83749 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bob Moragues <moragues@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-08-02mb/google/brox/var/greenbayupoc: update ALC236 verb tableWu Garen
The previous uploaded verb table is not fully applied due to configuration error. Uploaded the verb table provided by Realtek which can be found in b:336967284. BUG=b:326412504, b:336967284 TEST=deploy and check volume Change-Id: Ib9a8248c4a437fd204f40918d801a4a010a5c4df Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83465 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Terry Cheong <htcheong@chromium.org>
2024-08-02mb/google/brox/var/brox: Enable Class-D calibrationTerry Cheong
DC offset of class-D amplifier is 7mV in Brox which is larger than the expected 3mV. Add a section in the verb table to enable class-D calibration based on the updated verb table provided by Realtek in b:342506575 comment#6. This improves the offset to be less than 1mV. BUG=b:342506575 BRANCH=main TEST=Verify DC offset of speaker amplier output is less than 1mV with a multimeter when \ playing -100dB sine waves. Change-Id: I776f5c24ce3c829cbd64840957c1431608cf2b85 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82794 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-08-01mb/google/brox: Create jubilant variantRen Kuo
Create the jubilant variant of the brox reference board by copying the template files to a new directory named for the variant. BUG=b:348543712 TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_JUBILANT. Change-Id: Ic54437697058f8bce2167093bd88c0880d1b7cac Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83212 Reviewed-by: Bob Moragues <moragues@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2024-07-12mb/google/brox/var/lotso: Add FW_CONFIG for FPWentao Qin
This patch adds FW_CONFIG to accommodate different Lotso BoM components across various SKUs. 1. Fingerprint sensor - FP Present/Absent BUG=b:350360162 BRANCH=None TEST=Boot image on SKU2 and check FP working. Change-Id: I1ee5fcd1c29099bdbee741ef76c00cf45fcc1189 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83388 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-08mb/google/brox/var/lotso: Update DTT settings for thermal controlKun Liu
update DTT settings for thermal control,according to b:348285763#comment6. BUG=b:348285763 TEST=emerge-brox coreboot Change-Id: I67e16a2596884d501273a5787119406dff7a20f9 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83304 Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-07-05mb/google/brox/var/lotso: Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFSWentao Qin
SKU1 is UFS, SKU2 is NON-UFS, it needs to select this config to disable the MPHY clock in the SKU2 configuration to ensure that S0ix functions normally. BUG=b:350609955 BRANCH=None TEST=Boot image on SKU1/SKU2 and check S0ix working. Change-Id: I2fbcc7ffaabf3c085a3345ec94a8d45b225b3450 Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-07-04mb/google/lotso: Add hid report address for gt7986uKun Liu
Add hid report address for gt7986u. BUG=b:342932183 BRANCH=None TEST=Verify touchscreen work normal. Change-Id: I464c2691505083314528519f608108c8a31e6cc0 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83201 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-07-03mb/google/brox/var/lotso: Tune I2C frequency for 400 kHzJing Tong
Before: I2C0 - 401kHz I2C4 - 405kHz After: I2C0 - 392kHz I2C4 - 395kHz HW: Change R8409/R8411 to 33ohm. BUG=b:349743464,b:349735055 TEST=emerge-brox sys-boot/coreboot Test pass by EE Change-Id: I985837b1b80e973f148529b446905580c0f95e98 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83290 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
2024-06-28mb/google/brox/variants/brox/fw_config.c: Remove unused macroElyes Haouas
Change-Id: I8ce94c8bc7ed137eaace12d6cb0befa6c0d39a37 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82925 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-06-27mb/google/brox/var/lotso: GPP_B14 used for buzzerJing Tong
ALC257 does not supoort built-in digtal buzzer, So use external pwm to PCBEEP for beep sound. BUG=b:346956771 BRANCH=None TEST=emerge-brox coreboot sys-boot/chromeos-bootimage firmware-shell: devbeep -> can output beep normally. Change-Id: If924f9f27f229420e78015f418a97b2d5daf62e5 Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83147 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-26mb/google/brox/lotso: Add Fn key scancodeWen Zhang
The Fn key on Lotso emits a scancode of 94 (0x5e). BUG=b:322721490 TEST=Flash Lotso, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I999627f0ea9db1d79376150a04920ac877a48447 Signed-off-by: Wen Zhang <zhangwen6@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83204 Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-26mb/google/brox: Disable Touchscreen for hardware board version 1Karthikeyan Ramasubramanian
On board version 1 and later, touchscreen is not stuffed. Hence configure the relevant GPIOs as not connected, disable the concerned I2C bus in the devicetree as well as SoC chip config for board version 1. BUG=b:347333500 TEST=Build Brox BIOS image and boot to OS. Ensure that there are no peripherals detected in I2C 1 bus through i2cdetect tool. Ensure that no touchscreen devices are exported through ACPI SSDT table. Ensure that other I2C peripherals - eg. Trackpad and Ti50 are functional. Ensure that the device is able to suspend and resume for 25 cycles. Change-Id: Ia0578b90b0e8158ae28bcc51add637844ba6acf6 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83199 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-26mb/google/brox: Add default ACPI brightness levelsKarthikeyan Ramasubramanian
Kernel need the default brightness steps. Otherwise following error messages are observed in the kernel: [Firmware Bug]: ACPI(GFX0) defines _DOD but not _DOS ACPI BIOS Error (bug): Could not resolve symbol [^^XBCL], AE_NOT_FOUND ACPI Error: Aborting method \_SB.PCI0.GFX0.LCD0._BCL due to previous error (AE_NOT_FOUND) BUG=b:346807006 TEST=Build Brox BIOS image and boot to OS. Ensure that the concerned error messages are resolved. Ensure that the backlight controls are functional. Change-Id: Icd569b0efef31908edb1b7dc384e60a16fc5bd0c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83152 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-06-25lotso: Update board type to BOARD_TYPE_ULT_ULXKun Liu
Update board type to BOARD_TYPE_ULT_ULX BUG=b:348147663 BRANCH=none TEST=Built and compare the results of command 'dmidecode --type 17 | grep Speed' [Before] Speed: 8400 MT/s Configured Memory Speed: 6400 MT/s [After] Speed: 8400 MT/s Configured Memory Speed: 5200 MT/s Change-Id: I049d7c19424f41e83480f4b80bafd6ef8b9e30f6 Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
2024-06-24mb/google/brox: Add support for batteryless bootingShelley Chen
Set PsysPL2 and PsysPL3 in addition to making adjustments to PL2 and PL4 in order to prevent brownouts when we don't have a battery or have an empty battery at boot time. BUG=b:335046538,b:329722827 BRANCH=None TEST=flash Able to successfully boot on a SKU1 with 45W, 60W+ adapters and SKU2 with a 60W or higher type C adapter. 30W is still being worked on. Change-Id: Ie36f16b2c938dce29cd2130a86fc8c08f5ba0902 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-20mb/google/brox/var/lotso: enable CNVi bluetoothJing Tong
Lotso's WIFI_BT is same design as brox, copy from brox. BUG=b:339612353 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I030e306dc5d9d3fcb6314bc491dbf5c9ae60bcb7 Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83126 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
2024-06-19mb/google/brox/var/lotso: Update devicetree settingJian Tong
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: Ic9a7a9062f5c6e45c5bd9617f3b2a0634b8dc1db Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83051 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-19mb/google/brox/var/lotso: Update verb table from ALC256 to ALC257Jing Tong
Update verb table provided by Realtek on 20240614. BUG=b:344471736 TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Device list: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ALC257 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Headphone detection: Event: time 1718633617.056092, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1718633621.471708, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0 Event: time 1718633623.898046, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1718633625.743663, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 1 Event: time 1718633625.743678, type 1 (EV_KEY), code 115 (KEY_VOLUMEUP), value 0 Change-Id: Idde8963de9302849f87b7c262f17d9c9d99b46dc Signed-off-by: Jing Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83109 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-06-17Revert "mb/google/brox/var/lotso: enable CNVi bluetooth"Matt DeVillier
This reverts commit 0e0bc618e3ed1888ac140010057dc7485443c3c2. Reason for revert: Merged out of order, breaks tree Change-Id: I22bd85a2008db471177257a8b779c06898b1010c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83105 Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-17mb/google/brox/var/lotso: enable CNVi bluetoothJian Tong
Lotso's WIFI_BT is same design as brox, copy from brox. BUG=b:339612353 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I3946297db7f10a31570f773bdc5665f9f472c9fe Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83053 Reviewed-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-06-12mb/google/brox: Generate RAM IDsKun Liu
Generate RAM IDs for K3KL6L60GM-MGCT H9JCNNNBK3MLYR-N6E K3KL8L80DM-MGCU MT62F1G32D2DS-023 WT:C H58G56BK8BX068 BUG=b:333494257 BRANCH=None TEST=Run part_id_gen tool without any errors Change-Id: I7a240a263816193b9f3d418385c1673e9d3f89db Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83040 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
2024-06-12mb/google/brox/var/lotso: Update gpio settingJian Tong
Based on lotso EVT schematics update gpio settings. GSPI0_CS0_L -> NF7 GSPI0_MISO -> NF7 GSPI0_MISO -> NF7 GPP_F18 -> EDGE_SINGLE BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I12d84538566c4d51fe346eb5609e55d91ddafbea Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/83039 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
2024-06-07mb/google/brox/var/brox: update thermal settings to start fan earlySumeet Pawnikar
Current existing temperature thresholds of TSR1 sensor are set at 60C to start fan. Due to this CPU gets hot and temperature goes over 80C. In this situation, fan does not even start to lower down CPU temperature. With updated new settings based on tuning from thermal team, start fan early at 40C for TSR0 and TSR1 so the CPU temperature stays below 80C. BUG=b:339493551 TEST=Built and tested on google/brox board Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Change-Id: I4765c13c10e436733d8c9d017085968daa561ccc Reviewed-on: https://review.coreboot.org/c/coreboot/+/82784 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-06-06mb/google/brox/var/lotso: Add dq map settingJian Tong
Based on lotso EVT schematics add dq map settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I4f03e8a90522cbf2fe06f4160414202dcc4a2199 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82600 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Dengwu Yu <yudengwu@huaqin.corp-partner.google.com>
2024-06-05mb/google/brox/var/lotso: Update gpio settingJian Tong
Based on lotso EVT schematics update gpio settings. BUG=b:333494257 TEST=emerge-brox coreboot chromeos-bootimage and boot on Change-Id: I13485cc7ccd8b15352f5e21ad9336aa2b3d35749 Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82573 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-05-28mb/google/brox: Add romstage early graphicsSowmya Aralguppe
Select MAINBOARD_USE_EARLY_LIBGFXINIT for brox to enable SOL image. This patch enables Sign of Life image during MRC training. BUG=b:335369811 TEST=Able to boot to ChromeOS with SOL image. CPU log: [SPEW ] bootmode is set to: 0 (boot with full config) [0.384818] DP PHY mode status not complete [0.388911] DP PHY mode status not complete [0.393197] DP PHY mode status not complete [0.397484] DP PHY mode status not complete [0.401771] DP PHY mode status not complete [0.406057] DP PHY mode status not complete [0.410345] DP PHY mode status not complete [0.414632] DP PHY mode status not complete [0.418916] DP PHY mode status not complete [0.423203] DP PHY mode status not complete [0.427491] DP PHY mode status not complete [0.431777] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. [DEBUG] FMAP: area COREBOOT found @ 1877000 (7901184 bytes) [WARN ] CBFS: 'preram_locales' not found. [ERROR] ux_locales_get_text: preram_locales not found. [DEBUG] FMAP: area RW_ELOG found @ f20000 (16384 bytes) [INFO ] ELOG: NV offset 0xf20000 size 0x4000  elogtool list: 0 | 2024-05-10 02:26:07-0700 | Log area cleared | 4088 1 | 2024-05-10 02:26:07-0700 | Early Sign of Life | MRC Early SOL Screen Shown 2 | 2024-05-10 02:26:51-0700 | Memory Cache Update | Normal | Success 3 | 2024-05-10 02:27:09-0700 | System boot | 4 4 | 2024-05-10 02:27:09-0700 | Firmware Splash Screen | Enabled 5 | 2024-05-10 02:27:11-0700 | System Reset 6 | 2024-05-10 02:27:11-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown 7 | 2024-05-10 02:27:18-0700 | ACPI Enter | S5 8 | 2024-05-10 02:27:36-0700 | System boot | 5 9 | 2024-05-10 02:27:36-0700 | Firmware Splash Screen | Enabled 10 | 2024-05-10 02:27:37-0700 | System Reset 11 | 2024-05-10 02:27:37-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown Change-Id: I1d4795825960bc58f8f7ef494b01aa975f3bc346 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
2024-05-23mb/google/brox/var/brox: Remove mux references from typec portPrashant Malani
The Type-C kernel driver no longer programs the AP mux, as of https://review.coreboot.org/c/coreboot/+/82077. So remove device references to the TCSS Mux control device from the Type-C port driver. This eliminates the following kernel error which was observed as a result of the kernel trying to program muxes it no longer has control over: [ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95 [ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95 BUG=b:341331428 TEST=Run system reboot; configure mux kernel errors no longer seen. Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/brox: Update verb table to fix headset detection"Terry Cheong
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd. The new verb table breaks external mic detection on brox. Revert and use old verb tables instead. BUG=b:330433089 BRANCH=main TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brox/var/greenbayupoc: Update verb table from ALC256 to ALC236Wu Garen
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256) Update to Realtek provided verb table for ALC236 audio codec. BUG=b:336967284 TEST=Verified headset and audio workable on DUT with "rec" and "aplay" command. Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413 Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/brox/var/greenbayupoc: Add vbt from broxEren Peng
Copy the data.vbt from brox to greenbayupoc BUG=b:326413034 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT Change-Id: I1e8101519ab2ecbb4654c20485fbe83c90656e4d Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82108 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14mb/google/brox/var/greenbayupoc: Update devicetree and gpio settingsEren Peng
Based on latest schematics GREENBAY_0412.SCH update the gpio and devicetree settings. BUG=b:326413034 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot on DUT Cq-Depend:chrome-internal:7218819 Change-Id: I59f25b8abb7dd8a2dff7ff567b231bddc9db8455 Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-13mb/google/brox: Disable c1 state auto-demotionAshish Kumar Mishra
Disable c1 state auto-demotion support for brox BUG=None BRANCH=None TEST=Boot brox and verify in fsp debug logs Change-Id: I18d40cd721d46fce4702cf1a943583cd41c03cf4 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82104 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-12mb/google/brox/var/greenbayupoc: Configure board for SODIMM useEren Peng
Configure SODIMM settings for greenbayupoc. The SODIMM settings are copied from mainboard/google/brya/variants/baseboard/brask/memory.c. BUG=b:336955026, b:332230842 TEST=emerge-brox coreboot chromeos-bootimage, flash and boot to OS using Hynix HMAG56EXNSA051N 4G and Micron MTA8AFT1G64HZ-3G2R1 8G SODIMM. Change-Id: I1552cadfa81c48fe561947ded078bcca2e6bc6ad Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82085 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-09mb/google/brox: Sending End of Post (EOP) asynchronouslyKarthikeyan Ramasubramanian
Currently EOP message is sent to CSE late in the boot flow. Instead send it asynchronously to save ~10 ms in boot time. BUG=b:337330958 TEST=Build Brox BIOS Image and boot to OS. Change-Id: I229d16a5dcd072958db3f59a9c364bf7508b3047 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82236 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-08mb/google/brox: Fix the pad reset config for WLAN Wake interruptKarthikeyan Ramasubramanian
Update the pad reset config for WLAN Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S0ix & S3 and wakeup successfully using Wake on WLAN. 268 | 2024-05-07 13:56:44-0700 | S0ix Enter 269 | 2024-05-07 13:57:07-0700 | S0ix Exit 270 | 2024-05-07 13:57:07-0700 | Wake Source | GPE # | 3 271 | 2024-05-07 13:59:01-0700 | ACPI Enter | S3 273 | 2024-05-07 13:59:26-0700 | Wake Source | PME - WIFI | 0 274 | 2024-05-07 13:59:26-0700 | ACPI Wake | S3 275 | 2024-05-07 13:59:26-0700 | Wake Source | GPE # | 3 Change-Id: Ie0d6e6c8fefdd081e252ea99d6e3c559a5330b0e Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82234 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-08mb/google/brox/var/brox: increase PsysPmax from 21.5W to 208WLawrence Chang
According to Brox HW design, the PsysPmax is supposed to be 208W. This patch changes PsysPmax setting from 21.5W to 208W. Change-Id: I43f4b00a54dc0dfe6bd690492f9ef92698c9b903 Signed-off-by: Lawrence Chang <lawrence.chang@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82185 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-05-06mb/google/brox:Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATIONKrishna Prasad Bhat
Brox uses PDC<->PMC direct connection for USBC mux configuration. Select SOC_INTEL_TCSS_USE_PDC_PMC_USBC_MUX_CONFIGURATION to enable it. This patch also adds additional dependency on ENABLE_TCSS_USB_DETECTION to be selected only when PDC<->PMC direct connection and CHROMEOS is not used. BUG=b:332383540 TEST=USB3 plugged during G3, is detected after system boots from G3. Cq-Depend: chromium:5484387 Cq-Depend: chrome-internal:7106592 Change-Id: I0f62943f87d8fb6eb494c0aca3ef08c33cd05ffd Signed-off-by: Krishna Prasad Bhat <krishna.p.bhat.d@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-30soc/intel/alderlake: Default to 512 for DIMM_SPD_SIZEFelix Singer
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total SPD size of 512 bytes. Set this as the default and remove the setting from mainboard Kconfigs. Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30mb/google/brox: Add 20K pulldown to GPP_D14Shelley Chen
GPP_D14 is floating when ISH is not being used and wasting power. Add pulldown to prevent this from happening. BUG=b:336654954 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage make sure OS boots up HW team validated that power usage is 20 mW lower Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-29mb/google/brox: Fix the pad reset config for Touchpad interruptKarthikeyan Ramasubramanian
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup using Trackpad. 246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3 247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3 248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67 249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3 250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3 251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67 Also suspend to S0ix and wakeup using Trackpad. Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-25mb/google/brox/var/lotso: Add fw_config field for storagetongjian
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333494257 TEST=emerge-brox coreboot depthcharge sys-boot/chromeos-bootimage Change-Id: Idb62e3f37e1480979ae529692455beb533434520 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82056 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-19mb/google/brox/variants/lotso: add missing hda_verb.hFelix Held
Commit 00b40090aecf ("mb/google/brox: Move hda verb to variant dir") introduces a variant-specific file for the HDA verb tables, which commit 1bf0c3f1897c ("mb/google/brox: Create lotso variant") was missing which caused the build to fail when both patches were submitted. To fix the tree, add this file to the newly created lotso variant. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a85115a204d9d9447a58da71eb65b1de963023d Reviewed-on: https://review.coreboot.org/c/coreboot/+/82014 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-19mb/google/brox: Create lotso variantKun Liu
Create the lotso variant of the brox reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:333494257 BRANCH=None TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_LOTSO Change-Id: I5939127f9e6abe5b792c0627d9d67e739b27083b Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-19mb/google/brox: Move hda verb to variant dirtongjian
Others variant boards might use diff HDA Codec, so move hda verb to brox variant dir. BUG=b:314702466 BRANCH=None TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Device list: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ALC256 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Headphone detection: evtest 8 Event: time 1713404716.656768, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1713404716.656768, -------------- SYN_REPORT ------------ Event: time 1713404722.802661, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0 Event: time 1713404722.802661, -------------- SYN_REPORT ------------ Change-Id: Id987c248c37dc8bdc63be7a2513fa8997b5ddc33 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81945 Reviewed-by: Poornima Tom <poornima.tom@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-19mb/google/brox/var/greenbayupoc: Add fw_config field for storageEren Peng
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333325006 TEST=emerge-brox coreboot depthcharge with no errors Change-Id: I0e220787d6ac73ec8fa2469ed958981d0801920e Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-04-17mb/google/brox: Enable SAGvAshish Kumar Mishra
Enable SaGv support for brox BUG=None BRANCH=None TEST=Boot brox with SAGv enabled and verify in fsp debug logs Change-Id: I80c44e7df1d75732c6982b27e44ecd6060b1b3f1 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81556 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-15mb/google/brox: Create greenbayupoc variantEren Peng
Create the greenbayupoc variant of the brox reference board by copying the template files to a new directory named for the variant. BUG=b:329530883 BRANCH=None TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_GREENBAYUPOC. Change-Id: I90936d97b41e59c49dd92997146caf580bce1f4f Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81565 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-12mb/google/brox: Initialize NOTE_BOOK_MODE GPIOShelley Chen
The GPIO for NOTE_BOOK_MODE has changed from GPP_B17 to GPP_E9. Also initializing it (if ISH is enabled) to be NF2 (ISH_GP4). Also took the liberty of alphabetizing all the ISH GPIOs to they're easier to search through. BUG=b:316421831 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage Make sure that brox device still boots up with this change. Change-Id: I4a091b58deb855c7a7f1489a9506db2f821503b7 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81789 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-08mb/google/brox: Update verb table to fix headset detectionPoornima Tom
Correct verbtable value for pin widget 20 of Realtek ALC256 based on the updated verbtable received from Realtek. Updated Version : 5.0.3.1. This fixes the headset detection failure, when power_save is enabled in legacy hda driver. BUG=b:330433089 BRANCH=None TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I71b7d59b3ab5310a0b6cdb31fb5033f94263d151 Signed-off-by: Poornima Tom <poornima.tom@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81654 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Terry Cheong <htcheong@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-02mb/google/brox: Enable PMC pins to work with PDAshish Kumar Mishra
Enable SMLINK1 interface for PMC-PD communication to configure Type-C muxes. Refer RPL EDS vol 1: 765585. BUG=b:327622474 BRANCH=None TEST=Boot image on SKU2 and check PMC-PD working. Change-Id: Ia678d291e7a14aefe09026e70478fea3f68c8e10 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81207 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Deepti Deshatty <deepti.deshatty@intel.com>
2024-04-01mb/google/brox: Configure ISH device based on FW_CONFIGKarthikeyan Ramasubramanian
ISH Firmware name needs to be configured only when full sensing capabilities are enabled through ISH_ENABLE FW_CONFIG. Similarly DMA property needs to be added only when UFS is enabled through STORAGE_UFS FW_CONFIG. Hence configure the ISH device at run-time based on FW_CONFIG. BUG=b:319164720 TEST=Build Brox BIOS image and boot to OS. Change-Id: I678416acd48e03ab77ae299beae6e295a688b8df Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81418 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-03-30mb/google: Remove blank lines before '}' and after '{'Elyes Haouas
Change-Id: If68303cd59b287c8a5c982063b2ab75fd74898d6 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81477 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-03-27mb/google/brox: Fix GPE_EC_WAKE configurationKarthikeyan Ramasubramanian
Wake signal from EC is routed to GPP_D1 and hence GPE_EC_WAKE corresponds to GPE0_DW1_01. Fix GPE_EC_WAKE configuration. BUG=b:329026602 TEST=Build Brox BIOS image and boot to OS. Trigger suspend and wake up using EC generated events like AC connect/disconnect. Change-Id: Ifb89bd0de7b7fc316792e801ed5a1d3f25ca5b1c Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Kangheui Won <khwon@chromium.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Keith Short <keithshort@chromium.org>
2024-03-21mb/google/brox: Configure I2C timing for I2C devicesIvy Jian
Configure I2C0/1 timing in devicetree to meet timing requirement. (THIGH(us) minimum is 0.6us). Before: I2C0 : THIGH(us) 0.595us I2C1 : THIGH(us) 0.582us After: I2C0 : THIGH(us) 0.673us I2C1 : THIGH(us) 0.666us Change-Id: I79af4fde4eb08d4eb896794756a633701bebb755 Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81348 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-03-20mb/google/brox: support ISHLi Feng
Set FW_CONFIG bit 21 to enable ISH PCI device and define ISH main firmware name so ISH shim loader can load firmware from file system. ISH also need to be enabled if STORAGE_UFS is set. BUG=b:280329972 TEST= Set bit CBI FW_CONFIG bit 21 Boot Brox board, check that ISH is enabled and loaded lspci shows: 00:12.0 Serial controller: Intel Corporation Alder Lake-P Integrated Sensor Hub (rev 01). Change-Id: Iadc5108c62737d27642a6948c00b5c122541aaba Signed-off-by: Li Feng <li1.feng@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80773 Reviewed-by: Tanu Malhotra <tanu.malhotra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Yuval Peress <peress@google.com>
2024-03-19mb/google/brox: Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFSAshish Kumar Mishra
Select USE_UNIFIED_AP_FIRMWARE_FOR_UFS_AND_NON_UFS in brox Kconfig. This enables a single binary for both SKU1 and SKU2. For SKU2, upon boot from cold reset, it will disable the UFS Controller and then trigger a warm boot. BUG=b:329209576 BRANCH=None TEST=Boot image on SKU1/SKU2 and check S0ix working. Change-Id: Iabd0b3a83aa386e09310b671632368807a4018d4 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81224 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com>
2024-03-15brox: ish: Add Kconfigs for ISHYuval Peress
Modeled after the Rex Kconfigs for ISH. Change-Id: Ic670d550a9aaad64e52489d895b8aac2aee4b5ed Signed-off-by: Yuval Peress <peress@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81050 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-13mb/google/brox: Enable EC SW SyncShelley Chen
Now that EC software sync has been verified to work on Brox, we can enable it by default. BUG=b:326152804 BRANCH=None TEST=Verify that SW sync occurs Change-Id: I3d356c006fc448125605761f7328d1f1e203a7c4 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81211 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-03-09mb/google/brox: Enable Wake on WLAN for SKU1Ashish Kumar Mishra
For SKU1, wake pin is WLAN_PCIE_WAKE_ODL. Update gpio config and corresponding ACPI for WoWLAN. BUG=b:327379404 BRANCH=None TEST=Boot image on SKU1 and check Wake on WLAN from S0ix. Change-Id: I04c35da2c9ac57cafdf7f7a35d83ab2e7a05fe4a Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80780 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-03-04mb/google/brox: Update Verbtable for beep functionalitypoornima tom
For boot beep functionality, relevant register values are required to be updated. BUG=b:324528901 BRANCH=None TEST=Build & verified Boot Beep functionality on Brox Change-Id: If236c8ac173a279db676af412377fa4e4122c1cd Signed-off-by: poornima tom <poornima.tom@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80416 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-22mb/google/brox: Disable Early EC SyncShelley Chen
Early EC Sync does not need to be enabled in coreboot as EFS2 is being enabled in the EC. BUG=b:326152804 BRANCH=None TEST=emerge-brox coreboot To be tested with EC sync enabled Change-Id: I08bdbe9f3dcea837b0b148adc137c03d3461877a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80689 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-20mb/google/brox: enable DPTF functionality for broxSumeet Pawnikar
Enable DPTF functionality for brox board BRANCH=None BUG=b:324360936 TEST=Built and tested on brox board Change-Id: I0315f7f45688ccc36d321d6be4fa4fac7559a16b Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80418 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-02-18mb/getac to mb/intel: Add SPDX license headers to Kconfig filesMartin Roth
Change-Id: Id859c981d0bf5dcf90bf6858607a9fe726516309 Signed-off-by: Martin Roth <gaumless@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-02-17mb/google/brox: Handle bluetooth enable on devicesAshish Kumar Mishra
For devices that require CNVi Bluetooth select WIFI_BT_CNVI in FW_CONFIG. Discrete Bluetooth devices need to select WIFI_BT_PCIE. BUG=b:319188820,b:325084796 BRANCH=None TEST=Boot image on SKU1,SKU2 and check BT devices enumerate. Change-Id: Iba008682fcfa7ddc1ec400649c8742c721666f1d Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80564 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-16mb/google/brox: Set PCH_EC_PCH_INT_ODL pin as IOAPICShelley Chen
Setting the EC interrupt GPIO as an APIC is able to solve many problems that we are currently seeing: 1. Routing through the APIC make the IRQ# associated with this pin unavailable to claim for other devices in the kernel. This is causing EC interrupts to not work. 2. Since EC interrupt are not working, we are not able to flash the EC from the DUT. 3. Also, the GPI_INT configuration does not allow us to set the polarity of the GPIO, which means that it is by default set as active high. As a result, we are seeing an excessive number of host command interrupts to the EC. This disappears when we change the configuration to APIC and set the polarity as INVERT. BUG=b:319129926,b:324707182 BRANCH=None TEST=1. After boot up, check if ec_cros_lpcs driver was successfully registered. Look for the following string: "cros_ec_lpcs GOOG0004:00: Chrome EC device registered" 2. Make sure can flash the EC image from the DUT 3. Make sure EC console is not getting continuous stream of host commands. Change-Id: I74bff88d2ddbaf1f4b085c31d582bd66e18c438a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80467 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.corp-partner.google.com>
2024-02-13mb/google/brox: Set display output type for eDP panelMatt DeVillier
Set the display type for the LCD panel configured via the gfx/generic driver. This will ensure the correct DID/device address are generated in the SSDT. Change-Id: If63374329ed5eb4330517ca1bf2ba1ada24fa54a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80244 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Martin L Roth <gaumless@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-13mb/google/brox: Use name 'LCD0' for internal panel outputMatt DeVillier
The GMA driver generates the brightness controls expecting the name LCD0, so we need to use it here as well so that the DSDT and SSDT parts match. Change-Id: Id52f7c0e542423ba08eeed89bf9b171e540e10e4 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80243 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-02-09mb/google/brox: Initialize TCHSCR_RST_L to 0Shelley Chen
TCHSCR_RST_L signal was originally being configured to 1 in gpio.c but this was causing some leakage. Configuring it to 0 initially in romstage fixes this. Also, make sure that EN_PP3300_TCHSCR is initialized in romstage as well. BUG=b:322249892 BRANCH=None TEST=Make brox boots and touchscreen is still working Change-Id: I5bf1901a3a40a38237b950abcb758f96aebcc1cf Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80300 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-08mb/google/brox: Handle GPI_INT pin lower to GPI_WAKEAshish Kumar Mishra
In case where PAD_CFG_GPI_INT() is initialized with a pin value lower to PAD_CFG_GPI_IRQ_WAKE() for same GPIO community the set_ioapic_used() is only called for the PAD_CFG_GPI_IRQ_WAKE() pin. Due to this the IRQ associated with PAD_CFG_GPI_INT() is found free by find_free_unique_irq() during IRQ assignment and assigned to other pins which causes IRQ conflicts BUG=b:322984217 BRANCH=None TEST=Boot test on brox, check if correct IRQ assigned to EC Change-Id: I8c3d557e888b8d0ceac203f49b702910fba26d6d Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80334 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-05mb/google/brox: Fix the I2C configurationKarthikeyan Ramasubramanian
Update the I2C configuration to match the usage such that only required I2C controllers are enabled. BUG=b:319390850 TEST=Build Brox BIOS image and boot to OS. Ensure that only the required I2C controllers are enabled. Change-Id: I9f24beb9ef587163362cc6ded88efb05be1329b9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80303 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-02-01mb/google/brox: Enable HDA Codec ALC256Poornima Tom
On Brox, HDA Codec used is ALC256. Add verb table for the same. Also, add the related device tree changes for HDA related registers. Realtek High Definition Audio Configuration- Version : 5.0.3.1 BUG=b:317398558 BRANCH=None TEST=verified HDA on Brox. HDA Sound cards detected. Headphone working verified. Device listed under sysfs as below: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ID 256 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Change-Id: I1edd5aee053debe39b34048266703031c088cd00 Signed-off-by: Poornima Tom <poornima.tom@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79723 Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-31device/device.h: Rename busses for clarityArthur Heymans
This renames bus to upstream and link_list to downstream. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I80a81b6b8606e450ff180add9439481ec28c2420 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-01-26mb/google/brox: Enable TouchscreenShelley Chen
BUG=b:300690448,b:319393777 BRANCH=None TEST=tested on a device with i2cdetect Also tested with evtest and make sure Wacom is listed Change-Id: I4f528b0d778c8c4a4e83774d5c167ccb2d6afd9a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79895 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-26mb/google/brox: Remove CNVi BluetoothShelley Chen
This is causing an assertion error on the devices that don't have CNVi enabled because CNVi is hidden behind a FW_CONFIG flag in the overridetree now. BUG=b:319188820 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage make sure we can boot to kernel on device. Change-Id: Ifcfbc04825d4d4e7f2874a4c52f9c5cf3e657856 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80211 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-25mb/google/brox: Switch EC INT and WAKE GPIOsShelley Chen
There was a mistake in the gpio spreadsheet provided by the HW team and the GPIO assignments for the EC INT and WAKE signals got switched from what it was in the schematics. The correct assignments are: GPP_D0 = EC_PCH_INT_ODL GPP_D1 = EC_PCH_WAKE_ODL BUG=b:311450057,b:300690448 BRANCH=None TEST=emerge-brox coreboot Will try to boot OS image on device and see if there are any ec errors. Change-Id: I02057aeb5d82218dbbe4c939d4feb87a4d3da678 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79886 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-24mb/google/asurada to cyan: Rename Makefiles from .inc to .mkMartin Roth
The .inc suffix is confusing to various tools as it's not specific to Makefiles. This means that editors don't recognize the files, and don't open them with highlighting and any other specific editor functionality. This issue is also seen in the release notes generation script where Makefiles get renamed before running cloc. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I5855f49984db59d786decad6142e3525b146a573 Reviewed-on: https://review.coreboot.org/c/coreboot/+/80105 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2024-01-23mb/google/brox: Move cnvi to overridetreeShelley Chen
We need to disable the cnvi device when pcie wifi is enabled, so need to use the FW_CONFIG defined in the overridetree for this. BUG=b:311450057,b:300690448,b:319188820 BRANCH=None TEST=This will be tested on the device when received Change-Id: If9e861db37e321fd69c09f9b4aafa2e212f92caa Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79898 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-23mb/google/brox: Enable WLAN on root port 5Shelley Chen
BUG=b:311450057,b:300690448,b:319188820 BRANCH=None TEST=test on device with lspci & make sure can see the Intel Network controller Change-Id: I361bef13ebd073b6fccb729a1960d3832cf2681a Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79888 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2024-01-20mb/google/brox: enable WIFI_SARShelley Chen
Add get_wifi_sar_cbfs_filename(). This function uses the FW_CONFIG for WIFI to choose the right wifi_sar hex file. Below is the file mapping: wifi_sar_0.hex = wifi6 wifi_sar_1.hex = wifi7 BUG=b:319302319 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage Change-Id: I212c80412141e7770a512bd8ccf4111963bab395 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80085 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-18mb/google/brya: Drop primus4es boardJakub Czapiga
Primus4es board is no longer supported thus drop it from the tree. TEST=Build all Brya boards in CrOS-SDK - Primus4ES not built. No negative impact observed. Change-Id: I0502b2eed6f80d648b422c8d1622d504a6c93822 Signed-off-by: Jakub Czapiga <czapiga@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-01-18mb/google/brox: Fix user facing camera acronymShelley Chen
I got confused and used UFS (User Facing Side) for the User Facing Camera (UFC) in the FW_CONFIGs. Change references of the camera from UFS --> UFC. BUG=b:300690448 BRANCH=None TEST=None. The camera has not been enabled yet. Change-Id: I4f8240ae51aad1e077f325a9eab5a2a92f1402cb Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79997 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-17mb/google/brox: Move storage devices to overridetreeShelley Chen
These are specific to the brox board, so moving devices to the brox variant. BUG=b:311450057,b:300690448,b:319058143 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage will check if this helps detect the storage device in the factory Change-Id: I18d096040c293abfd4cd0b1bb5f50ba6dcc2e183 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-01-17mb/google/brox: Set up FW_CONFIGShelley Chen
Brox project has FW_CONFIG bits already set up in the project file for the retimer and for storage, so make sure that the brox device tree matches those settings. BUG=b:311450057,b:300690448,b:319058143 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage will check if this helps detect the storage device in the factory Change-Id: Iaf43003b7e8210eee9016d779839d7048c15825f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79854 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-01-13mb/google/brox: Enable Elan trackpadShelley Chen
BUG=b:311450057,b:300690448 BRANCH=None TEST=to be tested on a device with i2cdetect Change-Id: If6da1c722e87a50c6d422b300f16a52d884fa08f Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79892 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 02:39:03 +0000