summaryrefslogtreecommitdiff
path: root/src/mainboard/gigabyte
AgeCommit message (Collapse)Author
2014-11-22amdfam10: Move to per-device ACPIVladimir Serbinenko
Change-Id: I9ce2333e1ea527843f83d411dea2a669263156c2 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7027 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-14AMD: Move RAMBASE and RAMTOPKyösti Mälkki
There are no reasons to not load ramstage @ 0x100000. Boards with HAVE_ACPI_RESUME enabled have performance penalty in using excessive RAMTOP. For these boards, this change releases 11 MiB of RAM from CBMEM allocation to OS. Change-Id: Ib71995aba5e9332d0ec1626b3eb3b4ef6a506d1c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/7094 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-11-03Revert "gigabyte/ga-b75m-d3h: Add new Intel mainboard"Vladimir Serbinenko
Breaks abuild and is dependent on WIP, is WIP itself. This reverts commit d7d0c8134854cba72f0c3fe25946b27ce0364b43. Change-Id: I8b589b41632696aa4570abcceab5f3a3b0784649 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7319 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins)
2014-11-02gigabyte/ga-b75m-d3h: Add new Intel mainboardDamien Zammit
This is based on LENOVO X230 port. Board boots to linux via SATA. Remaining Issues: 1. Native raminit sometimes fails with "timC write discovery failed" even without changing the ram configuration. I suggest altering the native raminit code so that it reboots if that message appears to give a chance for the boot process to recover. 2. VGA does not work. Native graphics initialization only supports LVDS and the VGA Option ROM still hangs when run in SeaBIOS 3. USB does not work. SeaBIOS/GRUB2 do not detect devices connected to USB ports 4. Sound needs corrected codec verb settings Change-Id: Ib465a4824ef1a71ab6aa17bd40fc281215c6d44f Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: http://review.coreboot.org/7020 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-10-19amd: rename model_fxx_powernow to powernow.Vladimir Serbinenko
Change-Id: Iee581183f9cd9f5fecd5604536b735f6a04a0f93 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7019 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-10-17acpi_add_ssdt_pstates: Remove function.Vladimir Serbinenko
Nowhere in database p_state_num is set. So this whole function ends up being a noop. Moreover the offsets used by it are wrong with any optimizing iasl. Remove it in preparation of move to per-device ACPI. Change-Id: I1f1f9743565aa8f0b8fca472ad4cb6d7542fcecb Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/7012 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2014-10-16amdk8: Move to per-device ACPIVladimir Serbinenko
Change-Id: I485791015aa7eaabba53813945c216f5725554b1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6948 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-10-16ACPI: Remove CONFIG_GENERATE_ACPI_TABLESVladimir Serbinenko
As currently many systems would be barely functional without ACPI, always generate ACPI tables if supported. Change-Id: I372dbd03101030c904dab153552a1291f3b63518 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-09-13azalia: Shrink boilerplateVladimir Serbinenko
Change-Id: Ib3e09644c0ee71aacb067adaa85653d151b52078 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/6840 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-08-15intel/cpu: rename car.h to romstage.hAaron Durbin
This header has nothing to do with cache-as-ram. Therefore, 'car' is the wrong term to use. It is about providing a prototype for *romstage*. Change-Id: Ibc5bc6f3c38e74d6337c12f246846853ceae4743 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/6661 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-08-14Intel: Add common header file for CAR setupEdward O'Callaghan
When passing '-ffreestanding' the 'main' romstage.c may no longer necessarily be considered the entry point. From the C specification in 5.1.2.1 Freestanding environment; "In a freestanding environment (in which C program execution may take place without any benefit of an operating system), the name and type of the function called at program startup are implementation-defined." Clang complains about these being missing as Clang is somewhat more strict about the spec than GNU/GCC is. An advantage here is that a different entry-point type-signature shall now be warned about at compile time. Change-Id: I467001adabd47958c30c9a15e3248e42ed1151f3 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5872 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-24src/mainboard: Remove trailing whitespaceElyes HAOUAS
Change-Id: I14a9dc99acb5d5365a3d7e99a3964120bb611b05 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: http://review.coreboot.org/6308 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-07-18mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: If29a70be4fb56ebb0dbf6d510412cbe2f34480ef Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6291 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-07-17AMD get_bus_conf(): Drop bus_type arrayKyösti Mälkki
Only ever used as lvalue, so no point creating the array. Change-Id: I6699dfae9377a895e9bc4a52579d00ddcfa60a9f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6277 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-07-08mainboard: Trivial - drop trailing blank lines at EOF in .hEdward O'Callaghan
Change-Id: I4a4ee99468e5f1dae8412ae565a34290493db726 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6201 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-07-08mainboard: Trivial - drop trailing blank lines at EOFEdward O'Callaghan
Change-Id: I05d6d22664155ac8478e665733f816776e277c22 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/6200 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-06-26AMD boards: Fix typosKyösti Mälkki
Change-Id: I92f3877b58d9acaa9578337e66107e9cd9f46043 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6110 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-26PIRQ tables: Fix typosKyösti Mälkki
Change-Id: I4d8abe3841378e06515e1b3a8f22d78425d08449 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/6109 Tested-by: build bot (Jenkins) Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
2014-06-14amd/agesa,cimx: Rename ACPI OS detection methodsEdward O'Callaghan
Try to 'standardize' the otherwise peculiar method naming to be somewhat more in-line with other ACPI implementations. This makes it easier to compare with vendor DSDT dumps for example. Change-Id: I5ba54f7361796669ac0cab7ff91e7de43b22e846 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5888 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2014-05-12superio/ite/it8718f: Remove hard coding from romstageEdward O'Callaghan
Make use of the ITE common Super I/O framework and there-by removing any hard coding of Super I/O base address. Change-Id: I14af89d2727d7c6bac0f9840043c430726297429 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5717 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-05-11superio/ite/*: Factor out generic romstage componentEdward O'Callaghan
Following the reasoning of: cf7b498 superio/fintek/*: Factor out generic romstage component Change-Id: I4c0a9a5a7786eb8fcb0c3ed6251c7fe9bbbadae7 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5585 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2014-05-10Replace SERIAL_CPU_INIT with PARALLEL_CPU_INITKyösti Mälkki
Lines with 'select SERIAL_CPU_INIT' where redundant with the default being yes. Since there is no 'unselect SERIAL_CPU_INIT' possibility, invert the default and rename option. This squelches Kconfig warnings about unmet dependencies. Change-Id: Iae546c56006278489ebae10f2daa627af48abe94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/5700 Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2014-05-03Move ARCH_* from board/Kconfig to cpu or soc Kconfig.Furquan Shaikh
CONFIG_ARCH is a property of the cpu or soc rather than a property of the board. Hence, move ARCH_* from every single board to respective cpu or soc Kconfigs. Also update abuild to ignore ARCH_ from mainboards. Change-Id: I6ec1206de5a20601c32d001a384a47f46e6ce479 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: http://review.coreboot.org/5570 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2014-04-26superio/ite/it8716f: Rewrite from hardcoded base addrEdward O'Callaghan
Following the same reasoning as: HASHHERE superio/ite/it8721f: Rewrite from hardcoded base addr Removing hard coded magics and expose sio pnp api in romstage. Change-Id: I27433cb1a84b3641a6110ecf6bd5021e00769aba Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5565 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2014-04-26mainboard/*: Remove DUMP_ACPI_TABLES from amd boardsEdward O'Callaghan
Dumping the ACPI tables in this way has limited use, is not likely to be used and is poorly implemented. There are much more sophisticated tools available on Linux for debugging ACPI as such this code is outside the scope of coreboots 'bring up the hardware only' philosophy. A more generic implemention could be done with hexdump() in coreboot proper following on from this cleanup. Change-Id: Ifd3bfb76338609d18fcf7158d3c9a6d7c06c8847 Signed-off-by: Edward O'Callaghan <eocallaghan@alterapraxis.com> Reviewed-on: http://review.coreboot.org/5530 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-04-22Drop drivers/generic/debugKyösti Mälkki
Not very popular nor useful nowadays. Change-Id: I3dc0f7aaf188950a43f5350d3a95669fbbdcfd94 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4554 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2014-01-22board_info.txt: Classify almost all remaining boards.Vladimir Serbinenko
Based on info from commit messages (most devel/eval boards are mentioned as such in commit message) and information from vendor sites (mostly based on form factor). Classification for siemens/sitemp_g1p1 is based on info by Nico Huber. For Google boards based on info from ML posted by Aaron Durbin. Remaining unclassified board is: google/pit For which very little info is available publically. Change-Id: I12dfff4c629811a48cfc77be27bdc5081530b8f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4759 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@gmail.com>
2014-01-19board-status: Add board_info.txt extracted from wiki.Vladimir Serbinenko
board_info.txt is a file to be used by board-status to add some useful info to the generated table like flash chip type. This series is autogenerated from wiki page Supported_Motherboards. Change-Id: Ie2bda900713ef4883134477163320936c84c34f5 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4701 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-30AMD K8 (rev F): Move rev F0/F1 workaround to headerKyösti Mälkki
Place this in header so it works also when raminit_f.c and raminit_f_dqs.c are not #included in romstage.c build. The workaround remains to be disabled for all boards. Change-Id: Iff0271ceb21ee1e28a1a31d6bbdb97e29d76461e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4568 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-30AMD K8 (rev F): Move MEM_TRAIN_SEQ check to northbridgeKyösti Mälkki
Do it just to remove MEM_TRAIN_SEQ test under mainboard/ to see all K8 rev F boards do the same things here. Change-Id: If75035a4ef8882c2618d434d83ba59c408593d86 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4567 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-29AMD K8 (rev-F): Always have RAMINIT_SYSINFOKyösti Mälkki
K8 Rev F raminit code cannot be built without RAMINIT_SYSINFO, so have the option enabled together with K8_REV_F_SUPPORT. Also move the option under AMD K8. Change-Id: I91fa0b4ae7e3e54fbcb4a4f91eb043956cd0fb60 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4582 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-29AMD fam10: Drop RAMINIT_SYSINFOKyösti Mälkki
AMD fam10 raminit cannot be built without RAMINIT_SYSINFO, this is not a true option but copy-paste remainder from AMD K8. Change-Id: Id8edc112f3bacebd1732304ac9ee6e77cc6263b7 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4581 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-12-29AMD K8: Socket implies K8_REV_F_SUPPORTKyösti Mälkki
K8_REV_F_SUPPORT is already set by all affected sockets, (AM2, F, S1G1). Change-Id: If42a4178263d90a4e195fae0c78943ac9eda1ad6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4557 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-26AMD fam10: Drop MEM_TRAIN_SEQKyösti Mälkki
This config was for AMD K8 only. Change-Id: I76276405b676d1dd4d5dbf8c5b94194a670ccb25 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4555 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-12-26AMD boards (non-AGESA): Cleanup post_cache_as_ram.c includesKyösti Mälkki
Change-Id: Ib3a69e3364418426438f88ba14e5cf744e2414fa Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4524 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-12-26AMD boards (non-AGESA): Cleanup earlymtrr.c includesKyösti Mälkki
Change-Id: I5f4bf9dbaf3470dc83d3e980bb6cab10801e15c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4523 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
2013-12-09AMD boards: Fix includes for microcode updatesKyösti Mälkki
No ROMCC involved, no need to include .c files in romstage.c. Change-Id: I8a2aaf84276f2931d0a0557ba29e359fa06e2fba Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/4501 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-10-18get_bus_conf.c: reindent with indentPaul Menzel
Change-Id: Ia0c37339aa69b92a1b518fa5e49adc4a7628ae5d Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3979 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-08-16Correct spelling of shadow, setting and memoryPaul Menzel
Change-Id: Ic7d793754a8b59623b49b7a88c09b5c6b6ef2cf0 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3768 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-08-15Include boot_cpu.c for romstage buildsKyösti Mälkki
ROMCC boards were left unmodified. Change-Id: I3d842196b3f5b6999b6891b914036e9ffcc3cef0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3853 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-05-08Drop CONFIG_AP_CODE_IN_CARStefan Reinauer
This option has not been enabled on any board and was considered obsolete last time it was touched. If we need the functionality, let's fix this in a generic way instead of a K8 specific way. This was mostly a speedup hack back in the day. Change-Id: Ib1ca248c56a7f6e9d0c986c35d131d5f444de0d8 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3211 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2013-03-22x86: Unify arch/io.h and arch/romcc_io.hStefan Reinauer
Here's the great news: From now on you don't have to worry about hitting the right io.h include anymore. Just forget about romcc_io.h and use io.h instead. This cleanup has a number of advantages, like you don't have to guard device/ includes for SMM and pre RAM anymore. This allows to get rid of a number of ifdefs and will generally make the code more readable and understandable. Potentially in the future some of the code in the io.h __PRE_RAM__ path should move to device.h or other device/ includes instead, but that's another incremental change. Change-Id: I356f06110e2e355e9a5b4b08c132591f36fec7d9 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2872 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-01GPLv2 notice: Unify all files to just use one space in »MA 02110-1301«Paul Menzel
In the file `COPYING` in the coreboot repository and upstream [1] just one space is used. The following command was used to convert all files. $ git grep -l 'MA 02' | xargs sed -i 's/MA 02/MA 02/' [1] http://www.gnu.org/licenses/gpl-2.0.txt Change-Id: Ic956dab2820a9e2ccb7841cab66966ba168f305f Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2490 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-02-25AMD boards: ACPI DSDT: Use COREBOOT for the OEM Table ID fieldPaul Menzel
The DSDT header contains the fields OEMID and OEM Table ID. See for example ACPI specification 4.0a [1] 5.2.11.1 Differentiated System Description Table (DSDT) on page 135. There Table 5-16 contains the descriptions. Field Byte Length Byte Offset Description =================================================== OEMID 6 10 OEM ID OEM Table ID 8 16 The manufacture model ID. Currently in coreboot there is no common method what to put in these fields. Mostly Intel based boards populate it with "CORE " ore "COREv4" and AMD based boards populate it with the board vendor and model number, abbreviated appropriately to fit into these fields. On most boards the proprietary vendor BIOS seems to leave these fields – displayed with `sudo dmidecode` under System Information – blank To Be Filled By O.E.M. and fill out the Base Board Information with the board vendor and model name. In [2] Jens Rottmann argues that the this is really just the table ID used for naming it and that »99% of the DSDT code is not board specific«. Both approaches seem to have their advantages, but using the second one, developers often seem to forget to update them (for example AMD Thather). The current situation is at least not optimal. and therefore at least unify the string in the OEM Table ID. If unifying the OEM ID is also a good idea this should be done too. If later on it should be decided that the board vendor and model should be used again, this should be somehow derived from Kconfig. The following command was used for the change [3]. $ git grep -l '\/\* TABLE ID \*\/' | xargs sed -i '/TABLE ID/s/"\([^"]*\)"/"COREBOOT"/' This patch is split out from [2]. [1] http://www.acpi.info/spec40a.htm [2] http://review.coreboot.org/#/c/2464/ [3] http://stackoverflow.com/questions/5207838/sed-regex-matching-text-between-to-double-quotes-when-a-certain-text-appears-i Change-Id: Iec98c615ce37f928abc1b500eff5aa865d772cb2 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2472 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-25mainboard.c: Name enable_dev function uniformly `mainboard_enable`Paul Menzel
To reduce the differences between these file name the enabling device function in the directory `src/mainboard` uniformly `mainboard_enable` [1]. Thanks to the awesome help of gnomon and BlastHardcheese in the IRC channel #sed on <irc.freenode.net>. gnomon came up with the following command to do the actual work. $ cd src/mainboard $ for f in */*/mainboard.c ; \ > do src="$(awk '/\.enable_dev = /{v=$NF; sub(/,$/,"",v); print v}' "$f")" ; \ > [[ -z $src ]] && continue ; \ > printf '%s\n' "g/${src}/s/${src}\([,(]\)/mainboard_enable\1/p" w | ed -s "$f" ; \ > done `src/mainboard/digitallogic/msm586seg/mainboard.c` and `src/mainboard/technologic/ts5300/mainboard.c` had to be adapted manually as no comma was used separating the struct members. And with the following statement, gnomon is even more likable! My pleasure entirely. Good luck with coreboot; I'm a big fan of the project. [1] http://www.coreboot.org/pipermail/coreboot/2013-February/074548.html Change-Id: Ife9cd0c2d9cc1ed14afc6d40063450553f06a6c6 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/2493 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-02-14sconfig: rename lapic_cluster -> cpu_clusterStefan Reinauer
The name lapic_cluster is a bit misleading, since the construct is not local APIC specific by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-x86 systems without adding new keywords. Change-Id: Icd7f5fcf6f54d242eabb5e14ee151eec8d6cceb1 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/2377 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-02-14sconfig: rename pci_domain -> domainStefan Reinauer
The name pci_domain was a bit misleading, since the construct is only PCI specific in a particular (northbridge/cpu) implementation, but not by concept. As implementations and hardware change, be more generic about our naming. This will allow us to support non-PCI systems without adding new keywords. Change-Id: Ide885a1d5e15d37560c79b936a39252150560e85 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/2376 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-29Drop empty mainboard.cKyösti Mälkki
Change-Id: Idcf9349d96297b8cb0ea1e68769e02659ac16ab8 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1933 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-29Drop empty mainboard_opsKyösti Mälkki
Change-Id: I24866142eebcb8fdbc7e21f5b2f364a8d1b264b3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1932 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-28amdk8/amdfam10: Use CAR_GLOBAL for sysinfoPatrick Georgi
This gets rid of the somewhat unstructured placement of AMD's sysinfo structure in CAR. We used to carve out some CAR space using a Kconfig variable, and then put sysinfo there manually (by "virtue" of pointer magic). Now it's a variable with the CAR_GLOBAL qualifier, and build system magic. For this, the following steps were done (but must happen together since the intermediates won't build): - Add new CAR_GLOBAL sysinfo_car - point all sysinfo pointers to sysinfo_car instead of GLOBAL_VAR - remove DCACHE_RAM_GLOBAL_VAR_SIZE - from CAR setup (no need to reserve the space) - commented out code (that was commented out for years) - only copy sizeof(sysinfo) into RAM after ram init, where before it copied the whole GLOBAL_VAR area. - from Kconfig Change-Id: I3cbcccd883ca6751326c8e32afde2eb0c91229ed Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1887 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-11-27Remove AMD special case for LAPIC based udelay()Patrick Georgi
- Optionally override FSB clock detection in generic LAPIC code with constant value. - Override on AMD Model fxx, 10xxx, agesa CPUs with 200MHz - compile LAPIC code for romstage, too - Remove #include ".../apic_timer.c" in AMD based mainboards - Remove custom udelay implementation from intel northbridges' romstages Future work: - remove the compile time special case (requires some cpuid based switching) - drop northbridge udelay implementations (i945, i5000) if not required anymore (eg. can SMM use the LAPIC timer?) Change-Id: I25bacaa2163f5e96ab7f3eaf1994ab6899eff054 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/1618 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-16Fix PIRQ routing abstractionStefan Reinauer
intel_irq_routing_table is a local structure that should not be used globally, because it might not be there on all mainboards. Instead, the API has to be corrected to allow passing a PIRQ table in where needed. Change-Id: Icf08928b67727a366639b648bf6aac8e1a87e765 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1862 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-11-16Drop CONFIG_HAVE_BUS_CONFIG, clean up KconfigStefan Reinauer
This patch is the beginning of a Kconfig cleanup series - drop CONFIG_HAVE_BUS_CONFIG and add get_bus_conf.c if it exists in the mainboard directory - drop duplicate ACPI_SSDTX_NUM from mainboard Kconfig if it only defines the defaul value of 0 - Add mptable.c, fadt.c, reset.c and ssdtX.asl when they exist, not based on some Kconfig magic Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ia14a7116dad6a724af7e531920fee9a51fd0b200 Reviewed-on: http://review.coreboot.org/1832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-11-06Drop redundant CHIP_NAME in mainboard.cKyösti Mälkki
Compose the name from Kconfig strings instead. As the field is for debug print use only, a minor change in the output should do no harm. The strings no longer include word "Mainboard". Change-Id: Ifd24f408271eb5a5d1a08a317512ef00cb537ee2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1635 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-08-08Cleanup coreboot memory table includesKyösti Mälkki
The includes removed here were previously required for struct lb_memory and lb_add_memory_range(). Change-Id: Ie6c0d4ef55c2225aa709cf3fbad30ff1080e3610 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1391 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2012-08-08Drop HAVE_MAINBOARD_RESOURCESKyösti Mälkki
These existed to provide a hook to add reserved memory regions in the coreboot memory table. Reserved memory are now added as resources. Change-Id: I9f83df33845cfa6973b018a51cf9444dbf0f8667 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1414 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-08-02AMD and GFXUMA: move setup_uma_memory() to northbridgeKyösti Mälkki
UMA region can be determined at any time after the amount of RAM is known and before the uma_resource() call. Change-Id: I2a0bf2d3cad55ee70e889c88846f962b7faa0c7e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1379 Reviewed-by: Zheng Bao <zheng.bao@amd.com> Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2012-07-31Revert "remove CONFIG_SERIAL_CPU_INIT"Sven Schnelle
This reverts commit 78efc4c36c68b51b3e73acdb721a12ec23ed0369. The broadcast patch was reverted, so this commit should also be reverted. The reason for reverting the broadcast patch: It turned out that sending IPIs via broadcast doesn't work on Sandybridge. We tried to come up with a solution, but didn't found any so far. So revert the code for now until we have a working solution. Change-Id: I05c27dec55fa681f455215be56dcbc5f22808193 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1380 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-26Drop mainboard chip.hStefan Reinauer
mainboard_config never worked right, at least not since we've had sconfig. Hence, drop mainboard/<vendor>/<device>/chip.h and fix up the mainboards that tried to use it anyways. Change-Id: I7cd403ea188d8a9fd4c1ad15479fa88e02ab8e83 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1359 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-23AMD and GFXUMA: drop redundant use of lb_add_memory_range()Kyösti Mälkki
Use of uma_resource() in AMD northbridge code created a memory resource marked as reserved. Such resources are removed from system memory in write_coreboot_table(). Change-Id: Ib5e49e851d6622d8ece9d6d612e245b3962b9167 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1233 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-07-16Move setup_uma_memory() to AMDFAM10 northbridgeKyösti Mälkki
Following boards had identical code: advansus/a785e-i amd/bimini_fam10 amd/mahogany_fam10 asus/m5a88-v avalue/eax-785e gigabyte/ma78gm iei/kino-780am2-fam10 jetway/pa78vm5 Following boards had identical code: amd/tilapia_fam10 asus/m4a78-em asus/m4a785-m gigabyte/ma785gm gigabyte/ma785gmt In between the two, only whitespace difference. Change-Id: Iaa48cc7b0038ebcc81be49219b4fc87670aa9941 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1209 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-16Define global uma_memory variablesKyösti Mälkki
Use of the uma_memory_base and _size variables is very scattered. Implementation of setup_uma_memory() will appear in each northbridge. It should be possible to do this setup entirely in northbridge code and get rid of the globals in a follow-up. Change-Id: I07ccd98c55a6bcaa8294ad9704b88d7afb341456 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-05-10Integrate MA785GM-US2H to KconfigAlec Ari
MA785GM-US2H was left out of Kconfig. This allows the option to select the board. Change-Id: I9efea96c21dcd0754ab51824b410435b0b5300c2 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/1022 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-24Fix whitespace for ma785gmAlec Ari
Fix tabs and whitespace for ma785gm mainboard.c file. Change-Id: I8c94bf428bc4e78871da8c64f89221af4151e16d Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/923 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-24Update MA785GM codeAlec Ari
This commit adds the following to MA785GM: Refactor some alignment handling Unify Local APIC address definitions ACPI: More ../../.. removal Remove old AMD fam10 fixme comment amd/sb700: Move HAVE_HARD_RESET to southbridge Change-Id: I85a95bb641375dd61d1f58a2f2f972771d1d9ad9 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/922 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-23Add support for MA785GM-US2HAlec Ari
This patch adds coreboot support for the GIGABYTE MA785GM-US2H board. This port now removes all dead code in the previous patch set, and also boots Fedora 16 on x86_64 (Phenom II X4 955 BE) On-board audio causes spurious interrupts and the kernel gets stuck in an infinite loop. AtomBIOS on RadeonHD video cards does not function and causes another infinite loop. radeon.modeset=0 must be set. acpi=off must also be set. With those kernel command line options set, Fedora 16 makes it to the login screen. USB mouse and keyboard don't work though. several USB error codes on boot-up. PS/2 should. Change-Id: I58a7083a023ebf7373b6ded2e9f0adda7ab76dea Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/476 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-20Refactor some alignment handlingPatrick Georgi
Made using coccinelle: @@ expression E; @@ -(E + 7) & -8 +ALIGN(E, 8) @@ expression E; @@ -(E + 15) & -16 +ALIGN(E, 16) Change-Id: I071d2c98cd95580d7de21d256c31b6368a3dc70b Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/910 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-19Fix the blank in acpi_tables.czbao
Hope no more blank issue is got from future copy-paste. Change-Id: I5eb50e8232e339e7039a15054606aaff6b7ebc52 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/907 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-08Unify Local APIC address definitionsPatrick Georgi
We used several names for that same value, and hardcoded the value at some more places. They're all LOCAL_APIC_ADDR now (except for lapic specific code that still uses LAPIC_DEFAULT_BASE). Change-Id: I1d4be73b1984f22b7e84681edfadf0588a7589b6 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/676 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-22ACPI: More ../../.. removalPatrick Georgi
CPP is ran with src/ as part of its search path, so using <northbridge/...> and the like is safe. Change-Id: I644d60190ac92ef284d5f0b4acf44f7db3c788ee Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/649 Tested-by: build bot (Jenkins)
2012-02-22Remove old AMD fam10 fixme commentMarc Jones
The family10 code had a very slow decompress before the cache settings were fixed. This has been fixed for some time. Remove all the old messages from the serial stream. Change-Id: I476efe1a430f702af394734f354ff69bd053f1d2 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/672 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-02-17nvidia/mcp55: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: Ibfb7b294aa5007ac2f767d85e090572f85148bad Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/659 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17amd/sb700: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I7a7a1919b7a555156b8da21e8db7dd8f682d68e1 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/661 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-02-17sis/sis966: Move HAVE_HARD_RESET to southbridgePatrick Georgi
No in-tree board using that chipset has it not selected, so move selection from boards to southbridge. Change-Id: I9762ef01fc10c453ef643599c1c5dc8ee78081c3 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/663 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-30remove usbdebug.h include from mainboard/romstage codeSven Schnelle
No romstage is supposed to use usbdebug functions/defines directly, so remove all those includes. The usb code is now called and setup from console code. Change-Id: I9b1120d96f5993303d6b302accc86e14a91f7a9f Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/354 Tested-by: build bot (Jenkins)
2011-10-13Use default table creator macro for all SSDTsStefan Reinauer
Change-Id: I0c138ebfdc6d4d5ae7d3512b0dd68df20485690e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/262 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor mptable generation some morePatrick Georgi
The last couple of lines of every mptable function were mostly identical. Refactor into common code, a new function mptable_finalize. Coccinelle script: @@ identifier mc; @@ ( -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -printk(BIOS_DEBUG, "Wrote the mp table end at: %p - %p\n", mc, smp_next_mpe_entry(mc)); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); | -mc->mpe_checksum = smp_compute_checksum(smp_next_mpc_entry(mc), mc->mpe_length); -mc->mpc_checksum = smp_compute_checksum(mc, mc->mpc_length); -return smp_next_mpe_entry(mc); +return mptable_finalize(mc); ) Change-Id: Ib2270d800bdd486c5eb49b328544d36bd2298c9e Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/246 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Get rid of fixup_virtual_wirePatrick Georgi
As stated in some code files, fixup_virtual_wire was established to avoid touching 200 invocations of the mptable code. Let Coccinelle do it: @@ type T; identifier v; @@ -void fixup_virtual_wire(T v) -{ ... } @@ expression A; identifier v; @@ -v = smp_write_floating_table(A); +v = smp_write_floating_table(A, 0); @@ expression A; identifier v; @@ -v = smp_write_floating_table(A, 0); -fixup_virtual_wire(v); +v = smp_write_floating_table(A, 1); Change-Id: Icad8a063380bf4726be7cebb414d13b574112b14 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/245 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-13mptable: Refactor lintsrc generationPatrick Georgi
We copied pretty much the same code for generating mptable entries for local interrupts (with some notable exceptions). This change moves these lines into a generic function "mptable_lintsrc" and makes use of it in many places. The remaining uses of smp_write_lintsrc should be reviewed and replaced by mptable_lintsrc calls where possible, and smp_write_lintsrc made static. This patch was generated using Coccinelle: @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_DEFAULT|MP_IRQ_POLARITY_DEFAULT, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @@ expression mc; expression isa_bus; @@ -smp_write_lintsrc(mc, mp_ExtINT, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x0); -smp_write_lintsrc(mc, mp_NMI, MP_IRQ_TRIGGER_EDGE|MP_IRQ_POLARITY_HIGH, isa_bus, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, isa_bus); @m@ identifier mc; expression BUS; @@ -#define IO_LOCAL_INT(type, intr, apicid, pin) smp_write_lintsrc(mc, (type), MP_IRQ_TRIGGER_EDGE | MP_IRQ_POLARITY_HIGH, BUS, (intr), (apicid), (pin)); ... -IO_LOCAL_INT(mp_ExtINT, 0x0, MP_APIC_ALL, 0x0); -IO_LOCAL_INT(mp_NMI, 0x0, MP_APIC_ALL, 0x1); +mptable_lintsrc(mc, BUS); Change-Id: I97421f820cd039f5fd753cb0da5c1cca68819bb4 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/244 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-21Use ACPI text fields consistently with all other boardsStefan Reinauer
LXBIOS and LXB-DSDT are not used in other parts of the tree. Make names consistent across the tree. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Change-Id: I91caeac09fd2401a36e53bd061d249b236a48e43 Reviewed-on: http://review.coreboot.org/224 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-04Disable dev3 on ma78gm-us2hWang Qing Pei
Disable bus 0 dev 3 PCI bridge, ma78gm-us2h does not have this slot. Change-Id: Ia355ee385fd0f37793b4bdf1815c033670823eaa Signed-off-by: Wang Qing Pei <wangqingpei@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/187 Tested-by: build bot (Jenkins)
2011-08-25Minor ma785gmt clean-upAlec Ari
Change-Id: I9e889a6c475fb3283fa11f8b3de5baaf54235589 Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/167 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-25Fix up various dsdt.asl filesAlec Ari
Change-Id: I46eb27847deb3a903ac9af347992a9954e50ff6e Signed-off-by: Alec Ari <neotheuser@ymail.com> Reviewed-on: http://review.coreboot.org/166 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-07-22Update AMD SR5650 and SB700efdesign98
This updates the code for the AMD SR5650 and SB700 southbridges. Among other things, it changes the romstage.c files by replacing a .C file include with a pair of .H file includes. The .C file is now added to the romstage in the SB700 or SR5650 Makefile.inc. file to the romstage and ramstage elements. This particular change affects all mainboards that use the SB700, and their changes are include herein. These mainboards are: Advansus a785e, AMD Mahogany, Mahogany-fam10, Tilapia-fam10, Asrock 939a785gmh, Asus m4a78-em, m4a785-m, Gigabyte ma785gm, Iei Kino-780am2-fam10 Jetway pa78vm5 Supermicro h8scm_fam10 The nuvoton/wpcm450 earlysetup interface is changed because the file is no longer included in the mainboard romstage.c files. Change-Id: I502c0b95a7b9e7bb5dd81d03902bbc2143257e33 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/107 Tested-by: build bot (Jenkins) Reviewed-by: Kerry She <shekairui@gmail.com> Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-04-20run uart_init() from console_init, just like the other console ↵Stefan Reinauer
initialization functions. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6531 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-18* Set USBDEBUG_DEFAULT_PORT in all southbridges and use that valueStefan Reinauer
to unify calls to *_enable_usbdebug() * rename *_enable_usbdebug() to enable_usbdebug() * move enable_usbdebug() to generic romstage console init code and drop it from the individual romstage.c files. Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6513 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-04-10In 2007 Adrian Reber suggested that we drop ASSEMBLY in favor of __ASSEMBLER__.Stefan Reinauer
http://www.coreboot.org/pipermail/coreboot/2007-September/024665.html It's about time we follow this advice. Also move some manually set __PRE_RAM__ defines (ap_romstage.c) to the Makefile and drop unused CPP define Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Acked-by: Patrick Georgi <patrick@georgi-clan.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6482 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-28SP5100's code is based on SB700. Change the legacy sb700 of sb7xx_51xx.Zheng Bao
Since the SB700 has changed to sb7xx_51xx, change legacy name in other mainboard. Signed-off-by: Zheng Bao <zheng.bao@amd.com> Acked-by: Marc Jones <marcj303@gmail.com> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6463 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-08Enable mahogany_fam10 and Kino family 10h to run the SB HT link at the ↵Scott Duplichan
expected HT3 frequency and width by matching the BUID swap list to the production BIOS. In addition, the BUID swap list has been moved into the project-specific file romstage.c for the other 13 AMD family 10h projects as well. For projects using a desktop AMD family 10h processor, pasting in the mahogany_fam10 swap list will likely allow HT3 operation. This should be confirmed on real hardware before commiting any swap list change. A different swap list will be needed for server projects. For serengeti_cheetah_fam10, a reference BIOS swap list to try is: 0x00, 0x0A, 0x00, 0x06, 0xFF, 0x0A, 0x06, 0xFF. The patch makes these changes: 1) Remove the BUID swap list from ht_wrapper.c and put it in each of 15 romstage.c files where it is used (AMD family 10h projects). 2) Add a prototype to amdfam10.h. 3) Modify the swap list and test in real hardware for mahogany_fam10 and kino family 10h and confirm HT3 operation for the SB link. Abuild tested. Signed-off-by: Scott Duplichan <sc...@notabs.org> Acked-by: Stefan Reinauer <stefan.reinauer@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6439 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Fix some subsystemid statements in r6421Sylvain "ythier" Hitier
Signed-off-by: Sylvain "ythier" Hitier <sylvain.hitier@gmail.com> Acked-by: Sven Schnelle <svens@stackframe.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6425 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-03-01Use subsystem id from devicetree.cb instead of Kconfig and moveSven Schnelle
all boards to the new config scheme. Signed-off-by: Sven Schnelle <svens@stackframe.org> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6421 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2011-02-26Make AMD Fam10h CPU microcode updates optional in Expert modeXavi Drudis Ferran
Signed-off-by: Xavi Drudis Ferran <xdrudis@tinet.cat> Acked-by: Peter Stuge <peter@stuge.se> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6385 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-27Fix most CONFIG_DEBUG_RAM_SETUP issues. Stefan Reinauer
The intel/xe7501devkit is still broken, I think the (romcc) image is too big to fit in the bootblock if CONFIG_DEBUG_RAM_SETUP is enabled. It would make sense to convert all CPU_INTEL_SOCKET_MPGA604 to CAR, but I have no hardware to test. Signed-off-by: Stefan Reinauer <stepan@coreboot.org> Acked-by: Stefan Reinauer <stepan@coreboot.org> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6215 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
2010-12-17Remove some more unused/incorrect hda_verb.h files.Uwe Hermann
As discussed on the mailing list at http://www.coreboot.org/pipermail/coreboot/2010-December/062393.html http://www.coreboot.org/pipermail/coreboot/2010-December/062510.html Someone who owns these boards should create correct files at some point. Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de> Acked-by: Uwe Hermann <uwe@hermann-uwe.de> git-svn-id: svn://svn.coreboot.org/coreboot/trunk@6196 2b7e53f0-3cfb-0310-b3e9-8179ed1497e1
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-14 01:29:06 +0000