summaryrefslogtreecommitdiff
path: root/src/mainboard/gigabyte
AgeCommit message (Expand)Author
2010-01-25Align several kconfig options to match newconfig:Patrick Georgi
2010-01-18Move all IOAPIC selection to southbridges, and remove themPatrick Georgi
2010-01-16coreboot has 13 instances of IOAPIC setup distributed across a lotStefan Reinauer
2010-01-05* Explicitly add __PRE_RAM__ where it should be added.Stefan Reinauer
2009-11-27Eliminate special case id.inc/id.lds in favor of a configuration variable ID_...Patrick Georgi
2009-11-27Make newconfig and kconfig agree on MAINBOARD_PCI_SUBSYSTEM_{VENDOR,DEVICE}_IDPatrick Georgi
2009-11-06Remove drivers/pci/onboard. The only purpose was for option ROMs, which areMyles Watson
2009-11-06Remove some white space and comment differences from devicetree.cb and Config.lbMyles Watson
2009-11-06Drop all pre-CBFS rom_address entries in Config.lb/devicetree.cb.Uwe Hermann
2009-11-06Split the two usages of __ROMCC__:Myles Watson
2009-10-26Define some variables that were not defined. There are a couple left.Myles Watson
2009-10-24Major cleanups of the hard_reset() code and config in coreboot.- supermicro/x6dhe_g/auto.c
2009-10-24move all register fram definitions to arch/register.hStefan Reinauer
2009-10-23Drop dead K8_SCAN_PCI_BUS code. It's a bad idea to scan the PCI busses beforeMyles Watson
2009-10-20Remove CONFIG_CPU_AMD_FAM10 & CONFIG_CPU_AMDK8 from mainboards. They should beMyles Watson
2009-10-20Fix all board names in Kconfig as per wiki / vendor website.Uwe Hermann
2009-10-19Clean up some #ifdef CONFIG_*Myles Watson
2009-10-17Move files from src/cpu/x86/{fpu,mmx,sse}/ to x86/Peter Stuge
2009-10-16Fix AP_CODE_IN_CAR (only selected for two boards), STACK_SIZE, and HEAP_SIZE.Myles Watson
2009-10-16Drop enable_mmx.inc. It reads (only) "Enabling mmx registers is a noop"Peter Stuge
2009-10-16Set default ROM sizes per-board to match the ROM chip that cameUwe Hermann
2009-10-16Change CONFIG_LB_MEM_TOPK to CONFIG_RAMTOP to match CONFIG_RAMBASE.Myles Watson
2009-10-15Add CONFIG_GENERATE_* for tables so that the user can select which tables notMyles Watson
2009-10-09Add const to get rid of some warnings when passing quoted strings.Myles Watson
2009-10-07Major CONFIG_IRQ_TABLE_COUNT fixing and cleanups. Some of these boardsUwe Hermann
2009-10-07Kconfig:Patrick Georgi
2009-10-07More boards in kconfig, and moved -O2 flag for romcc intoPatrick Georgi
2009-10-06UseUwe Hermann
2009-10-06Various fixes to Kconfig: All kconfig-boards should have aPatrick Georgi
2009-10-05PCI_ROM_RUN and CONSOLE_VGA are global options in Kconfig andUwe Hermann
2009-10-04The new CBFS based build system requires the whole ROM to be accessibleUwe Hermann
2009-10-04This does away with CONFIG_ROM_PAYLOAD_START and CONFIG_PAYLOAD_SIZE.Patrick Georgi
2009-10-03Remove another FAILOVER variable. (trivial)Patrick Georgi
2009-10-03Add gigabyte/m57sli support to Kconfig.Harald Gutmann
2009-10-03Remove:Patrick Georgi
2009-10-03Remove duplicate and not too useful Kconfig board comments asUwe Hermann
2009-09-23simplify source tree hierarchy: move files from sdram/ and ram/ to lib/Stefan Reinauer
2009-08-26Add kconfig support for all missing Intel 440BX based boards.Uwe Hermann
2009-08-19Reduce size of the romstage on various boards that fail to build on QA.Patrick Georgi
2009-08-12Kconfig!Patrick Georgi
2009-08-11Enable CBFS everywhere. All boards compiled for me (abuild tested),Patrick Georgi
2009-07-22Fix up the tree again...Stefan Reinauer
2009-07-07ChangeLog:Harald Gutmann
2009-07-02ChangeLog:Harald Gutmann
2009-06-30the tool chain settings should not be in renamed (as they will never live inStefan Reinauer
2009-06-30This patch unifies the use of config options in v2 to all start with CONFIG_Stefan Reinauer
2009-06-19Undo my ugly commit that added uses clauses in lots of places instead of one.Myles Watson
2009-06-19ChangeLog:Harald Gutmann
2009-06-18Change Log:Harald Gutmann
2009-06-18Change Log:Harald Gutmann
2009-06-17Fix configuration of boards that didn't have uses CONFIG_USE_INIT. Trivial.Myles Watson
2009-06-06When I started refactoring mainboard Config.lb, I added two differentCarl-Daniel Hailfinger
2009-06-03Revert "CMOS: Add set_option and rework get_option."Luc Verhaegen
2009-06-03CMOS: Add set_option and rework get_option.Luc Verhaegen
2009-05-01Trivial patch to make #defines generated from cmos.layout have unique names. ...Myles Watson
2009-04-30Refactor copy_and_run so that it uses a single code base instead ofPatrick Georgi
2009-04-22drop duplicate compiler options that are already mentioned in CFLAGS.Stefan Reinauer
2009-04-21Thanks to Myles' patch adding support for include statements,Carl-Daniel Hailfinger
2009-04-14v2/src romfs->cbfs renamePeter Stuge
2009-04-13I need to do uses HAVE_ACPI_RESUME for each board. Here we go.Rudolf Marek
2009-04-12This patch cleans up the calls to $CC in mainboard Config.lb files. TheyCarl-Daniel Hailfinger
2009-04-11Kill remaining unneeded CAR/ROMCC if-blocks.Carl-Daniel Hailfinger
2009-04-01Drop CONFIG_CHIP_NAME. Those config statements in Config.lb shouldStefan Reinauer
2009-03-31Add the CONFIG_ROMS config variable. Ronald G. Minnich
2009-02-18Carl-Daniel's part:Carl-Daniel Hailfinger
2009-01-20This patch makes the recently added assembler debug optional, as it mayStefan Reinauer
2008-12-22Fix implicit declarations of get_bus_conf.Carl-Daniel Hailfinger
2008-12-10Use -O2 and -mcpu=p2 as romcc options for all Intel 440BX boards.Uwe Hermann
2008-11-28This patch from Ralf Grosse Boerger makes debugging more comfortable. Stefan Reinauer
2008-11-27Remove the unnecessary memctrl[] indirection, 440BX only has oneUwe Hermann
2008-10-12Drop tons of duplicated debug.c files, move common file toUwe Hermann
2008-10-01The ARRAY_SIZE macro is convenient, yet mostly unused. Switch lots ofCarl-Daniel Hailfinger
2008-09-04This changes the python generated makefilesCarl-Daniel Hailfinger
2008-06-22Enable hardware fan control for m57sli.Ronald Hoogenboom
2008-02-25This patch adds automatic fan control for the CPU fan on the m57sliRonald Hoogenboom
2008-02-01 This patch fixes the decoding of the IO address range 0x0820->0x0827 into theFlorentin Demetrescu
2008-02-01This patch reverses an erroneous change that sneaked in during r2972, and brokeWard Vandewege
2008-01-26This patch fixes the remaining stack protector problem on v2. The DISTRO_CFLA...Ronald G. Minnich
2008-01-18Rename almost all occurences of LinuxBIOS to coreboot. Stefan Reinauer
2008-01-18Please bear with me - another rename checkin. This qualifies as trivial, noStefan Reinauer
2008-01-09Use macros to improve readability of the device-to-pin IRQ assignmentsCarl-Daniel Hailfinger
2008-01-07Improve readability and remove redundancy by wrappingTorsten Duwe
2007-12-21Add an interrupt entry for the onboard firewire controller,Torsten Duwe
2007-12-17Enable IDE legacy port access for all 440BX based boards per default, asUwe Hermann
2007-11-22Mark devices which are not available on the board with "N/A" toUwe Hermann
2007-11-201. Fix pirq routing table setting for GA-2761GXDK.Morgan Tsai
2007-11-14Gigabyte M57SLI: Fix watchdog clocksource to be external, not internal.Carl-Daniel Hailfinger
2007-11-14Autodetect presence of serial flash and set up the board accordingly.Carl-Daniel Hailfinger
2007-11-14* Maintaining SiS south bridge device IDs.Morgan Tsai
2007-11-12Fix the remaining issues with GA-M57SLI Super I/O GPIO configuration.Carl-Daniel Hailfinger
2007-11-12Try to fix a few loose ends on the GA-M57SLI Super I/O GPIO Carl-Daniel Hailfinger
2007-11-05Fix the M57SLI routing table, as apparently set up from LinuxBIOS onTorsten Duwe
2007-11-021. vgabios removed, will go to extra repositoryMorgan Tsai
2007-10-31As started in Torsten Duwe
2007-10-31Add initial support for the GIGABYTE GA-6BXC.Uwe Hermann
2007-10-30[LINUXBIOS] Add the CPU_OPT flag to facilitate passing flags into the buildJordan Crouse
2007-10-30Rename the SiS761GX/SiS966 board to the correct name, GIGABYTE GA-2761GXDK.Uwe Hermann
2007-05-22reverting 2683, NAK by YhLu, patch not necessary.Stefan Reinauer
2007-05-21The Gigabyte m57sli-s4 board supports Rev. F CPUs.Ward Vandewege
2007-04-26Activate EC for access to fan speeds and temperature sensors.Ward Vandewege