summaryrefslogtreecommitdiff
path: root/src/mainboard/gigabyte/ga-g41m-es2l
AgeCommit message (Collapse)Author
2019-11-04mb/*/*{i82801gx}: Use sb/intel/common/acpi/platform.aslArthur Heymans
Change-Id: Ifc0799d26394a525d764fb4ffc096b48060ee22f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-11-01soc/intel/{IA-CPU/SOC}: Move sleepstates.asl into southbridge/intel/common/acpiSubrata Banik
This patch creates a common instance of sleepstates.asl inside intel common code (southbridge/intel/common/acpi) and asks all IA CPU/SOC code to refer sleepstates.asl from common code block. TEST=Able to build and boot Hatch and ICL DE system. Dump DSDT.asl to verify S0/S3/S4/S5 entries after booting to OS. Change-Id: Ie2132189f91211df74f8b5546da63ded4fdf687a Signed-off-by: Subrata Banik <subrata.banik@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36463 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-10-11sb/intel/i82801gx: Move CIR init to a common placeArthur Heymans
Some boards with the G41 chipset lacked programming CIR, so this change add that to those boards too. Change-Id: Ia10c050785170fc743f7aef918f4849dbdd6840e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35795 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-08-26soc/intel: Use common romstage codeKyösti Mälkki
This provides stack guards with checking and common entry into postcar. The code in cpu/intel/car/romstage.c is candidate for becoming architectural so function prototype is moved to <arch/romstage.h>. Change-Id: I4c5a9789e7cf3f7f49a4a33e21dac894320a9639 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34893 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-08-18cpu/intel: Enter romstage without BISTKyösti Mälkki
When entry to romstage is via cpu/intel/car/romstage.c BIST has not been passed down the path for sometime. Change-Id: I345975c53014902269cee21fc393331d33a84dce Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-20mb/,sb/intel/i82801gx: Merge `ide_legacy_combined` into `sata_mode`Nico Huber
Functional changes were already done in 5eb81bed2e (sb/intel/i82801gx: Detect if the southbridge supports AHCI) but we forgot to update the `chip.h` and devicetrees. Change-Id: I0e25f54ead8f5bbc6041d31347038e800787b624 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34462 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-06-06sb/intel/i82801gx: Detect if the southbridge supports AHCIArthur Heymans
This automatically detects whether the southbridge supports AHCI. If AHCI support is selected it will be used unless "sata_no_ahci" is set in the devicetree to override the behavior. Change-Id: I8d9f4e63ae8b2862c422938f3103c44e761bcda4 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30822 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-05mb/*/devicetree.cb: Remove unavailable PCIe portsArthur Heymans
Some variants only support 4 PCIe ports so there is no need to have those unavailable ports in the devicetree. Change-Id: I154cae358fb7f862fc0c8eaa620474b37b5e6484 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30821 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-13sb/intel/i82801gx: Use SOUTHBRIDGE_INTEL_COMMON_PMCLIBPatrick Rudolph
Use common code to detect ACPI S3. Tested on Thinkpad X60. Change-Id: Ia759a9ed141efc8130860300f2a8961f0c084d70 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/32041 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-03-13src/mainboard/*/*/cstates.c: Drop unused includesElyes HAOUAS
Change-Id: I315721d6261e558c3f7145c80714262052ce0e49 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31783 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-13{mb,nb/pineview}/*.asl: Remove unneeded include i82801gx.hElyes HAOUAS
Change-Id: I1a0eed712e489b0fb63a7b650151646a56852d76 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/30321 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-04arch/io.h: Drop unnecessary includeKyösti Mälkki
Change-Id: I91158452680586ac676ea11c8589062880a31f91 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31692 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-03-01device/pci: Fix PCI accessor headersKyösti Mälkki
PCI config accessors are no longer indirectly included from <arch/io.h> use <device/pci_ops.h> instead. Change-Id: I2adf46430a33bc52ef69d1bf7dca4655fc8475bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/31675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-02-07src: Remove unused include device/pnp_def.hElyes HAOUAS
Change-Id: Ibb7ce42588510dc5ffb04c950c4c8c64e9a2fa37 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/31238 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2019-01-23nb/intel/x4x: Use parallel MP initArthur Heymans
Use parallel MP init code to initialize all AP's. Also remove guards around CPU code where all platforms now use parallel MP init. This also removes the code required on lapic init path for model_6fx, model_1017x and model_f4x as all platforms now use the parallel MP code. Tested on Intel DG41WV, shaves off about 90ms on a quad core. Change-Id: Id5a2729f5bf6b525abad577e63d7953ae6640921 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/25601 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-10mb: Move timestamp_add_now to northbridge x4xElyes HAOUAS
Change-Id: Iacbee658a4049e1c13a120dbc21425ffb6a1cabb Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/30750 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2019-01-09cpu/intel: Use the common code to initialize the romstage timestampsArthur Heymans
The initial timestamps are now pushed on the stack when entering the romstage C code. Tested on Asus P5QC. Change-Id: I88e972caafff5c53d8e68e85415f920c7341b92d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2019-01-08sb/intel/i82801gx: Autodisable functions based on devicetreeArthur Heymans
This removes the need to synchronize the devicetree and the romstage writing to FD. Change-Id: I83576599538a02d295fe00b35826f98d8c97d1cf Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30244 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-01-08mb/{ga-g41m-es2l,d945gclf,rk886ex}: Fix devicetreeArthur Heymans
The devicetree was synced incorrectly with respect to the function disable register set in romstage. Change-Id: I189c5fdc433b5577ae008abf42878cdc6e3f2d52 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/30711 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-12-28arch/x86: Drop spurious arch/stages.h includesKyösti Mälkki
Change-Id: I3b9217a7d9a6d98a9c5e8b69fe64c260b537bb64 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/30388 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-23mb: Set coreboot as DSDT's manufacturer model IDElyes HAOUAS
Field 'OEMID' & "OEM Table ID" are related to DSDT table not to mainboard. So use macro to set them respectvely to "COREv4" and "COREBOOT". Change-Id: I060e07a730e721df4a86128ee89bfe168c69f31e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29790 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: David Guckian
2018-11-21ACPI: Fix DSDT's revision fieldElyes HAOUAS
DSDT revision is =1 for ACPI v1 and =2 for greater ACPI version. This will cause the AML interpreter to use 32-bit integers and math if the version is 1, and 64-bit if the version is >=2. Current spec version is 2 for ACPI 6.2-a. Change-Id: I77372882d5c77b7ed52dcdd88028403df6f6fa7f Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/29626 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-12mb/*/*: Harmonise FD and devicetree on boards featuring ICH7Arthur Heymans
On some boards the devicetree and Function Disable register did not match. In this case the FD values are put in the devicetree as these were the values that were actually used in practice. A complete devicetree will make it easier to automatically disable devices in ramstage. Change-Id: I1692ca5f490ea84e2fc520d3f66044ad7514f76e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/27122 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2018-08-15mb/*/*/cmos.default: Decrease debug_level to 'Debug'Elyes HAOUAS
Used default console log level is 7 in src/console/Kconfig. So let cmos.default use the same level as default. Change-Id: Ia39ee457a8985142f6e7a674532995b11cb52198 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/28006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2018-08-13mb: Get rid of unneeded include <cbmem.h>Elyes HAOUAS
Change-Id: I80dd65484fd52e9048635091fb20a123e959e999 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/27869 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-29sb/intel/i82801{g,j}x: Automatically generate ACPI PIRQ tablesArthur Heymans
Both southbridges need to be done at once since this southbridge code is used for different northbridges, which fails to compile when done separately. This needs an acpi_name functions in the northbridge code to be defined. TESTED on Intel DG43GT: show correct PIRQ ACPI entries in /sys/firmware/acpi/tables/SSDT. Change-Id: I286d251ddf8fcae27dd07011a1cd62d8f4847683 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22981 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14nb/intel/x4x: Deprecate native graphic initArthur Heymans
Libgfxinit provides a better alternative to the native C init. While libgfxinit mandates an ada compiler, we want to encourage use of it since it is in much better shape and is actually maintained. This way libgfxinit also gets build-tested by Jenkins. Change-Id: I4843f52307b87cff6fa6f4d0c74b87428fefa8ac Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-14mb/*/*: Enable libgfxinit on x4x boardsArthur Heymans
TESTED Intel DG41WV with VGA, Intel DG43GT with VGA and HDMI1 and HDMI2. Change-Id: I774b79cc0ef9dc72ccf48901ab94376b27ed9c7a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26966 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-12drivers/intel/gma: Unify VBT related Kconfig namesNico Huber
Shuffle words and drop the _DATA_FILE suffix. Change-Id: I0b0d50ea729e5580c0bc7b43f250ff387ce59cfc Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/26898 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-06-11mb/*/*/acpi_tables.c: Remove unneeded includesElyes HAOUAS
Change-Id: If1f032d097224a1102ba29d8d45dce46aad3a91a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-06-06mb/*/*: Add a few VBT filesArthur Heymans
These files are directly extracted from the vendor firmware. Change-Id: I1dea2843255e4a3e93fbb734dea284be029dbc45 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-06-04mb/gigabyte: Get rid of whitespace before tabElyes HAOUAS
Change-Id: I0b0a09098bd4185ae36f1468ebc151e39668ee86 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/26620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-05-01nb/intel/x4x: Change memory layout to improve MTRRArthur Heymans
This change also makes sure that the sum the uma regions (TSEG, GSM, GSM) is 4MiB aligned. This is needed to avoid cbmem_top floating between 2 usable ram region, since cbmem_top is aligned 4MiB down to easy MTRR setup for ramstage. At least tianocore requires this and fails to boot without it. Better MTRR are achieved by making the memory 'hole' till 4GiB exactly 2Gib. This code mimics how it is done in nb/intel/gm45 and achieves similar results. TSEG is enabled and set to 8M since this makes it easier to reuse the common smm setup / parallel mp code and makes it possible to cache the ramstage in there like how it's done on newer targets. TESTED on Intel DG43GT. Change-Id: I1b5ea04d9b7d5494a30aa7156d8c17170e77b8ad Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2018-01-26mb/*/*/cmos.layout: Fix the values for the console levelArthur Heymans
Fix the values that were off by one. This was discovered when using postcar stage that prints with debuglevel BIOS_NEVER. Change-Id: I73a077950ed0dc735d89c9747a8da0a25f30822d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23186 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2018-01-14mb/*/*/romstage.c: Clean up targets with i82801gxArthur Heymans
Things cleaned up in this patch: * Add macros for the GENx_DEC registers; * replace many magic numbers by macros; * remove many writes to DxxIP since they were 'setting' reset default values; * fix some comments about decode ranges. Change-Id: I9d6a0ff3d391947f611a2f3c65684f4ee57bc263 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/21065 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-01-05nb/intel/x4x: Disable watchdog, halt TCO timer and clear timeoutArthur Heymans
Especially on ICH7 failing to do so results in i2c block read being unusable. On ICH10 this problem doesn't manifest itself that much. This moves disabling the watchdog reboot to the northbridge code like i945 (even though it technically is southbridge stuff). TESTED on Intel DG41WV: hacking on raminit is much nicer since no need to do a hard power down for +4s are needed to clear the timeouts. Change-Id: Icfd3789312704f61000a417f23a121d02d2e7fbe Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/22997 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2017-10-22superio/ite/common: Add temperature offsetVagiz Trakhanov
Add a devicetree option to set temperature adjustment registers required for thermal diode sensors and PECI. However, this commit does not have the code needed to make PECI interface actually use these registers. It only applies to diodes. As a temporary workaround, one can set both THERMAL_DIODE and peci_tmpin to the same TMPIN, e.g. TMPIN3.mode="THERMAL_DIODE" and peci_tmpin="3". PECI, apparently, takes precedence over diode, so the adjustment register will be set and PECI activated. Or simply use the followup patch, which makes THERMAL_PECI a mode like THERMAL_DIODE. I don't have hardware to test THERMAL_DIODE mode, but in case of PECI, without this patch I had about -60°C on idle. Now, with offset 97, which was taken from vendor bios, PECI readings became reasonable 35°C. TEST=Set a temperature offset, then ensure that the value you set is reflected in /sys/class/hwmon/hwmon*/temp[1-3]_offset Change-Id: Ibce6809ca86b6c7c0c696676e309665fc57965d4 Signed-off-by: Vagiz Tarkhanov <rakkin@autistici.org> Reviewed-on: https://review.coreboot.org/21843 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-09-23mb/*/*: Remove rtc nvram configurable baud rateArthur Heymans
There have been discussions about removing this since it does not seem to be used much and only creates troubles for boards without defaults, not to mention that it was configurable on many boards that do not even feature uart. It is still possible to configure the baudrate through the Kconfig option. Change-Id: I71698d9b188eeac73670b18b757dff5fcea0df41 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19682 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-06-02Kconfig: Rework MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFGNico Huber
* Rename it to HAVE_VGA_TEXT_FRAMEBUFFER. * Let drivers select it if they are in charge. * Don't select it on the mainboard level if a driver handles it. Change-Id: I2d9d09be9aa6d019e77460e69a245ad2d8cda4ea Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/19791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-05-21mb/gigabyte/ga-g41m-es2l: Enable IO decode range for LPT and FDDArthur Heymans
Change-Id: I77aabf98ea48c6e8bdbe322f89666935f59a289a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19760 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-05-20mb/gigabyte/ga-g41m-es2l: Add timestamps in romstageArthur Heymans
Change-Id: I93f43a0af41ae86f1b8ba33e28f3b9f060a5ab5e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19513 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2017-05-12mb/gigabyte/ga-g41m-es2l: Don't disable PATAArthur Heymans
This board features a PATA port. TESTED PATA drive works in SeaBIOS and OS. Change-Id: I74dc72c22e6c4fed07f28ef7d88adde54656ae39 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19627 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-05-11nb/intel/x4x: Define and use default MMCONF_BASE_ADDRESSArthur Heymans
Currently only one board uses this northbridge in coreboot but some patches are pending to add more. Change-Id: If035e442d1a23674667f46a07b44c4f2b81be48c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/19650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-02-17nb/intel/x4x: Implement resume from S3 suspendArthur Heymans
It rewrites the results of receive enable stored in the upper nvram region, to avoid running receive enable again. Some debug info is also printed about the self-refresh registers. (Not enforcing a reset here, since 0 does not necessarily mean it's not in self-refresh). Change-Id: Ib54bc5c7b0fed6d975ffc31f037b5179d9e5600b Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17998 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-02-17nb/intel/x4x: Fix raminit on reset pathArthur Heymans
Previously the raminit failed on hot reset and to work around this issue it unconditionally did a cold reset. This has the following issues: * it's slow; * when the OS issues a hot reset some disk drives expect their 5V power supply to remain on, which gets cut off by a cold reset, causing data corruption. To fix this some steps in raminit must be ommited on the reset path. This includes receive enable calibration. To achieve this it stores receive enable results in RTC nvram for them to be rewritten on the resume path. Note: The same thing needs to be done on the S3 resume path. Calling a hot reset after raminit "outb(0x6, 0cf9)" works. Change-Id: I6601dd90aebd071a0de7cec070487b0f9845bc30 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/18009 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2017-01-06sb/ich7: Use common/gpio.h to set up GPIOsArthur Heymans
This is more consistent with newer Intel targets. This a static struct so it is initialized to 0 by default. To make it more readable: * only setting to GPIO mode is made explicit; * only pins in GPIO mode are either set to input or output since this is ignored in native mode; * only output pins are set high or low, since this is read-only on input; * blink is only operational on output pins, non-blink is not set explicitly; * invert is only operational on input pins, non-invert is not set explicitly. Change-Id: I05f9c52dee78b7120b225982c040e3dcc8ee3e4e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17639 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Patrick Rudolph <siro@das-labor.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-12-06cpu/x86/msr.h: Drop excessive includesKyösti Mälkki
Change-Id: Ic22beaa47476d8c600e4081fc5ad7bc171e0f903 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/17735 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-11-28mb/gigabyte/ga-g41m-es2l: Tie in configuration for SuperIO ECDamien Zammit
Change-Id: Ifba821a7e355a0d6689f21c7f307e3901903a3fd Signed-off-by: Damien Zammit <damien@zamaudio.com> Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17602 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-11-22mb/gigabyte/ga-g41m-es2l: Add MAX_CPU = 4 in KconfigArthur Heymans
This motherboard support Intel core 2 quads. Before this change SeaBIOS was not usable, due to it crashing before it got to load anything. Change-Id: Ifdaaceace04f9ba0753aab2d3b05c0519367f91f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17537 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2016-11-21mb/ga-g41m-es2l: Correctly configure PCI IRQ in ACPIArthur Heymans
Obtained from vendor bios DSDT, under "Device (HUB0), Name (_ADR, 0x001E0000)". The schematics also indicate that the INTA-D are hardwired to these PIRQ lines. Change-Id: I8e1c6cb986a2b345a5e1fddd454c7fb12fb8256a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17099 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-25mb/ga-g41m-es2l: remove unneeded IGD IRQ setting in ACPIArthur Heymans
According to: "Intel ® 4 Series Chipset Family datasheet" the IGD only has 1 IRQ pin. Change-Id: I974f002f5a213056f4593a1eab10772527bb241d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/17098 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-10-10gigabyte/ga-g41m-es2l: add VESA mode to KconfigArthur Heymans
This patch adds MAINBOARD_HAS_NATIVE_VGA_INIT_TEXTMODECFG to the gigabyte/ga-g41m-es2l Kconfig to allow selecting between textmode and vesamode in menuconfig. Change-Id: I84b61118fa0419d49d2498b66029711cdce97576 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/16501 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-13mainboard/gigabyte/*: transition away from device_tAntonello Dettori
Replace the use of the old device_t definition inside mainboard/gigabyte/*. Change-Id: Ied62d6234a4f6ea5f851e98a098b2c8f4e3db144 Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/16439 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-09-09mb/gigabyte/ga-g41m-es2l: Remove PCI disable on PEG bridgeDamien Zammit
Although the goal was to hide the ME device by disabling the PCI bridge, the original comment that this bridge was ME related was a mistake, this bridge is for PEG not for ME. We still need this PCI bridge "on" to enable pci express graphics add-on cards. Change-Id: Ibf322136097d77a8e7c05dcb14f72da938187a0a Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16496 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-07mb/gigabyte/ga-g41m-es2l: Add IRQs for PCI express graphics in ACPIDamien Zammit
With this patch and the previous ones in this set, PCI express graphics is now working. 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller]) Change-Id: Ife691fb381e90e7744fe2ac4e20977be53419a14 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/16497 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.h@gmx.de>
2016-09-02Fix newlines at the end of filesMartin Roth
All but ga-g41m-es2l/cmos.default had multiple final newlines. ga-g41m-es2l/cmos.default had no final newline. Change-Id: Id350b513d5833bb14a2564eb789ab23b6278dcb5 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/16361 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Antonello Dettori <dev@dettori.io>
2016-08-17mainboard: Clean up boot_option/reboot_bits in cmos.layoutNico Huber
Since commit 3bfd7cc (drivers/pc80: Rework normal / fallback selector code) the reboot counter stored in `reboot_bits` isn't reset on a reboot with `boot_option = 1` any more. Hence, with SKIP_MAX_REBOOT_CNT_CLEAR enabled, later stages (e.g. payload, OS) have to clear the counter too, when they want to switch to normal boot. So change the bits to (h)ex instead of (r)eserved. To clarify their meaning, rename `reboot_bits` to `reboot_counter`. Also remove all occurences of the obsolete `last_boot` bit that have sneaked in again since 24391321 (mainboard: Remove last_boot NVRAM option). Change-Id: Ib3fc38115ce951b75374e0d1347798b23db7243c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/16157 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineering.com> Reviewed-by: York Yang <york.yang@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-08-09gigbyte/ga-g41m-es2l: add cmos.layout and cmos.defaultArthur Heymans
This adds a cmos.layout and a cmos.default to ga-g41m-es2l. This allows to set things like baud_rate, debug_level, etc. from cmos. Change-Id: I25df7a1f3a0ce486b96cfe05bda628f604b0baec Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/15493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-06-21intel/car/cache_as_ram_ht.inc: Prepare for dynamic CONFIG_RAMTOPKyösti Mälkki
Change-Id: Idb0f621553e76e771a5d6f2d492675ccd989d947 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/15228 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-31mb/gigabyte/ga-g41m-es2l: Update board_info.txt and add item to KconfigDamien Zammit
This adds the website URL to the board info and also enables the realtek nic reset function as per a previous patch. Change-Id: I2cda120c59b55f0dd2ffa78d397b16beb13d6843 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14954 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mb/gigabyte/ga-g41m-es2l: Use x4x_late_init()Damien Zammit
This patch adds DMI/EP init to the board and fixes a couple of minor things. Change-Id: I10d0f6ce747b60499680e4dc229b7fcbb16cc039 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14926 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-05-31mb/gigabyte/ga-g41m-es2l: Fix ACPI IRQ settings for SATADamien Zammit
Previously, due to a bug in devicetree and incorrect IRQ settings in ACPI, SATA controller would not initialize any HDDs in the OS, even though it worked in SeaBIOS. The devicetree setting is not needed because SATA must function in "plain" mode on this board, as "combined" mode does not work at all. Change-Id: I0036c4734de00b84cc3d64f38e4b1fd80fd1a25d Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/14776 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Remove PMBASE settings and commented code.Damien Zammit
Fixed incorrect comment regarding port 80 LPC route. Change-Id: Ifbb73753d5a0737418b869085f2329a02504e5dc Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13466 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Remove copy-pasted cstatesDamien Zammit
Change-Id: I5b6edbd97d4e6ed8b03f2f319a338022647e26ea Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13465 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com>
2016-01-29mb/gigabyte/ga-g41m-es2l: Move MMCONF base address to 0xe0000000Damien Zammit
Change-Id: I3873d92069cc1d113a8092d609d1768ff45cbd45 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13129 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-01-29nb/intel/x4x: Move to early cbmemDamien Zammit
Previously with errors in the ram init, early cbmem was disabled. Now that the ram is working correctly, set as early cbmem platform and update all (1) boards to use it. Tested on GA-G41M-ES2L Change-Id: I5925c28821537f0e326b4f5a2ac39778e4724a3c Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13131 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-01-26ga-g41m-es2l: Instead of forcing native VGA, make it selectableMartin Roth
This allows the native VGA to be disabled for debug, or if someone wants to use the vbios. Change-Id: I59a94fa0d02bfe254c8a598e15d3d9d73ecfe650 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/12848 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Damien Zammit <damien@zamaudio.com>
2015-12-30gigabyte/ga-g41m-es2l: Add mainboardDamien Zammit
Board uses x4x native raminit Board boots into Debian 8 with full graphics IRQ9: nobody cared, gets disabled (PIC needs IRQ settings?) VGA: - VGA native init works in grub with analog connector - Fails to boot with both channels of ram populated Change-Id: I7417813456817529b8cbaace45cefe47467d0a82 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/11306 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 03:49:28 +0000