summaryrefslogtreecommitdiff
path: root/src/mainboard/amd/bilby
AgeCommit message (Collapse)Author
2021-12-20mb/amd/bilby,mandolin: use full path of SoC's chip.hFelix Held
This is taken from CB:41355 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iba1948ae2332788b7e0ec9b4e3cea35c6608b152 Reviewed-on: https://review.coreboot.org/c/coreboot/+/60200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-10-05src/mainboard to src/security: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie34003a9fdfe9f3b1b8ec0789aeca8b9435c9c79 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58081 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-09-30mb/amd/bilby: Use I2S TDM interfaceAamir Bohra
Bilby uses I2S TDM interface for audio, instead of HDA interface. Change-Id: I7c8ec02d0e63730cb54a27d3bea1d102e037823d Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57519 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: ritul guru <ritul.bits@gmail.com>
2021-09-23soc/amd: rename program_gpios to gpio_configure_padsFelix Held
Use the same function name as in soc/intel for this functionality. This also brings the function name more in line with the extended version of this function gpio_configure_pads_with_override which additionally supports passing a GPIO override configuration. This might cause some pain for out-of-tree boards, but at some point this should be made more consistent, so I don't see a too strong reason not to do this. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I88852e040f79861ce7d190bf2203f9e0ce156690 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-09-08mb/amd/{bilby,mandolin}: Turn empty `chip` entry into commentNico Huber
A chip entry in the devicetree is not hooked up without a device beneath it. It seems the intention was to leave these superio drivers unconfigured, so there should be no harm to turn the entries into comments. Change-Id: I6b606f35eba089b74c562084772d95be41cac39c Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-30mb/(amd,google): Remove spi configuration from devicetreeMartin Roth
Now that the SPI configuration has been moved into Kconfig, it is no longer needed in devicetree. BUG=b:194919326 TEST=Build & boot guybrush Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Ifdcd3f33173194c4a25794137756b143751edd70 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56962 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-28mb/(amd,google): Update SPI Kconfig settings based on devicetreeMartin Roth
This takes the devicetree SPI settings and moves them into Kconfig. BUG=b:195943311 TEST=boot guybrush & majolica and verify spi settings. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Icce1d57761465ae8255e5d9ce8679f3fdcb0ceed Reviewed-on: https://review.coreboot.org/c/coreboot/+/56885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-08-09mb/amd/bilby: Set Clk always on for x4 and x8 external PCIe SlotAamir Bohra
Keep the clock source for PCIe slots as always on. Also turn off the unused (0/1/5/6) clock sources. Currently bilby only uses clock sources 2, 3 and 4, out of which clock source 3 and 4 are routed for PCIe external slot. And clock source 2 is routed for M.2 PCIe slot. TEST:Verify end devices enumerate on D:F 1.1/1.2 RPs over warm reboot. Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Change-Id: Ida485b06279b0a8659c8d00873c3d6023d1e542f Reviewed-on: https://review.coreboot.org/c/coreboot/+/56826 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-08-04mb/amd/bilby: Add support for HDMI displayAamir Bohra
DDI 0/1 ports are shared for DP and HDMI. This implementation adds support for HDMI display when HDMI is set as connector type in ddi descriptors. TEST=verify display over HDMI(0 and 1) in OS. Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Change-Id: I9697211c556f12d1fc0d49418b227fbe6b342673 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56756 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-08-04mb/amd/bilby: Enable DP2 and DP3 enumerationAamir Bohra
DP2 and DP2 is muxed with USBC port. This implementation configures mux for DP functioanlity. TEST=Verify display over DP2 and DP3. Signed-off-by: Aamir Bohra <aamirbohra@gmail.com> Change-Id: If0c8dfbb47175789bb27d4506c1e8b45c425c76a Reviewed-on: https://review.coreboot.org/c/coreboot/+/56755 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: ritul guru <ritul.bits@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-07-26mb/*: Specify type of `FMDFILE` onceAngel Pons
Specify the type of the `FMDFILE` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I810bd3fe8d42102586db6c2c58b7037a60189257 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56557 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_PART_NUMBER` onceAngel Pons
Specify the type of the `MAINBOARD_PART_NUMBER` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: I3692f9e82fe90af4d0da1d037018a20aa1b45793 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56554 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26mb/*: Specify type of `MAINBOARD_DIR` onceAngel Pons
Specify the type of the `MAINBOARD_DIR` Kconfig symbol once instead of doing so on each and every mainboard. Change-Id: If1cc538b0c4938dac193699897b690e402b3c1e8 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56553 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-07-26src/*: Specify type of `CBFS_SIZE` onceAngel Pons
There's no need to specify the type of the `CBFS_SIZE` Kconfig symbol more than once. This is done in `src/Kconfig`, along with its prompt. Change-Id: I9e08e23e24e372e60c32ae8cd7387ddd4b618ddc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/56552 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Frans Hendriks <fhendriks@eltan.com> Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-17soc/amd/picasso: introduce and use devicetree aliases for UART0-3Felix Held
Since the default state of the MMIO UART devices in the chipset devicetree is off, the mainboard devicetree entries that disable MMIO UART devices are removed. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I913a587802020ce4e182b48632cdde1104c2a6e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55545 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for remaining PCIe devicesFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id2bdce5871f57e9edb17f89cba61b5c5ae018566 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55104 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01mainboards using soc/amd/picasso: use aliases for PCIe devices on bus 0Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6199c70163d32467abe5ba5da55c73ff62ba10f Reviewed-on: https://review.coreboot.org/c/coreboot/+/55103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-06-01soc/amd/picasso: introduce and use chipset device treeFelix Held
The chipset devicetree only has the essential PCIe devices enabled that are needed for the SoC code to work. It also defines aliases for all PCIe devices that can be used to reference the devices in the mainboard- specific devicetrees and devicetree overrides. To make the change easier to review that part will be done in a follow-up patch. Despite missing in the PPR, device pci 18.7 exists on Picasso. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6b7c3fd32579a23539594672593a243172c161c7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/50626 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-05-28mb/amd/bilby,cereme,mandolin: change PSPP policy to balancedFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7571ed92b3c3fa79581e2c7342960ca31451af1f Reviewed-on: https://review.coreboot.org/c/coreboot/+/54935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-27soc/amd/picasso: add devicetree setting for PSPP policyFelix Held
Since the default for the corresponding UPD of the Picasso FSP is DXIO_PSPP_POWERSAVE and the devicetree default is DXIO_PSPP_PERFORMANCE, add a deviectree setting for each board that's using the Picasso SoC code to not change the setting for the existing boards. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I0008ebb0c0f339ed3bdf24ab95a20aa83d5be2c9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/54934 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-05-06soc/amd/common/espi,mb/: Allow configuring open drain ALERT#Raul E Rangel
Some designs might wish to use an open drain eSPI ALERT#. This change adds an enum that allows setting the eSPI alert mode. BUG=b:187122344, b:186135022 TEST=Boot guybrush using all 3 alert modes Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia35fc59a699cf9444b53aad5c9bb71aa27ce9251 Reviewed-on: https://review.coreboot.org/c/coreboot/+/52954 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-04-29soc/amd/common/acp: Move Audio Co-processor driver to commonKarthikeyan Ramasubramanian
Audio Co-processor driver is similar for both Picasso and Cezanne SoCs. Hence move it to the common location. BUG=None. TEST=Builds Dalboz, Trembyle, Vilboz, Mandolin and Bilby mainboards. Change-Id: I91470ff68d1c183df9a2927d71b03371b535186a Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52643 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-04-20mainboard: Drop redundant DEVICETREE configurationFelix Singer
`devicetree.cb` is the default value for the Kconfig DEVICETREE setting. Drop redundant configurations. Change-Id: I5eded3d5e38ca80986da2fda95050815c2702f82 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52504 Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-12mb/amd/bilby: Use Picasso VBIOS as defaultRitul Guru
use PicassoGenericVbios.bin as default instead of raven VBIOS for Bilby. Change-Id: I99621173a33a1154f8bb4929d199288265bbe04d Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52209 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-08mb/amd/bilby: Enable postcode on port 0x80Ritul Guru
selecting SOC_AMD_COMMON_BLOCK_USE_ESPI will disable the lpc decodes, so not selecting that keeps the lpc decodes. Change-Id: I03a8d4b804cee205b9e06b00e2e5a442452f8f86 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52016 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-04-08mb/amd/bilby: enable boot from NVMe SSDRitul Guru
These changes involve NVMe specific GPIO programming to enable pcie NVMe SSD boot. Add nvme dev,func in devicetree and also remove unused GPIOs programmed in Bilby. Change-Id: I4407f82122c04b13684d4176ba5cd5a9fe03f0db Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/51674 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-08soc/amd,mb/google/,mb/amd: Move sleepstates.aslRaul E Rangel
This file is common for all the AMD platforms. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I10ee600b4bcd7aaff39bfab075eb4dbc9096b435 Reviewed-on: https://review.coreboot.org/c/coreboot/+/51299 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-03-01mb/: Drop print of MAINBOARD_PART_NUMBERKyösti Mälkki
Change-Id: Ie3870bc666acaea316f00b205de512cf790e720c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50718 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2021-02-24mb/amd,google: Rename static functions to mainboard_enableKyösti Mälkki
Let's not have 7 boards of all use a different name for the .enable_dev function in mainboard chip_operations. Change-Id: I07f3569e6af85f4f1635595125fe2881ab9ddd43 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50999 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-24mb/amd,google/zork: Move init_tables() callKyösti Mälkki
The semantics of pirq_setup() from previous platforms was to only setup the global pointers for PIC and APIC tables, not to create or modify the tables themselves. Change-Id: Iaa7c31eed21432dc2b3fe6b32803bd2658fd5e2d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50717 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-22mb/amd/bilby: updating EC FW specific options for bilbyRitul Guru
EC does not exist in Bilby platform, so removing EC size from board.fmd and updating bilby fmap size to 0xfef000. Removing unused EC FW config options MANDOLIN_HAVE_MCHP_FW and MANDOLIN_MCHP_FW_FILE. Change-Id: I9ca4e421b0d80d041ed4046fa20cc16e24a776d0 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-02-17mainboard/amd/bilby: Add Bilby CRB boardRitul Guru
Bilby is the reference board for AMD Raven, Raven2 and Picasso APUs. Bilby mainboard code is taken from mandolin variant Cereme. These new files are a renamed copy and subsequent patches will be applied to create a working bilby implementation. Change-Id: I426966d782e259a971ec36bac2498bc62b4ce7e2 Signed-off-by: Ritul Guru <ritul.bits@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/50315 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-12 04:26:44 +0000