| Age | Commit message (Collapse) | Author |
|---|
|
This update 'input-event-codes.h' file to master branch.
Change-Id: I09839886824868cfaff6127fe44ff02d7e21ba42
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Iabbb637c797a361a2cbc55505002774ff4f774e1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77526
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These Kconfig options were being used basically as #define statements,
which is unnecessary. This isn't a good use of Kconfig options and would
be better just as #defines if actually needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3c3f7f579ec0ec4fdb72e1f6b785026daab17bac
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76297
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Registering Clock Driver (RCD) is responsible for driving address and
control nets on RDIMM and LRDIMM applications. Its operation is
configurable by a set of Register Control Words (RCWs). There are two
ways of accessing RCWs: in-band on the memory channel as MRS commands
("MR7") or through I2C.
Access through I2C is generic, while MRS commands are passed to memory
controller registers in an implementation-specific way.
See JESD82-31 JEDEC standard for full details.
Change-Id: Ie4e6cfaeae16aba1853b33d527eddebadfbd3887
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67060
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: I9d4f048c859bc89897d50a5a07468c3375aa1dcf
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67059
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Early Chromebook generations stored the information about
USB port power control for S3/S5 sleepstates in GNVS, although
the configuration is static.
Reduce code duplication and react to ACPI S4 as if it was ACPI
S5 request.
Change-Id: I7e6f37a023b0e9317dcf0355dfa70e28d51cdad9
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
The resource allocator's setup_resource_ranges will make sure that the
memory resources are 4KiB-aligned. The resource allocator doesn't
enforce any alignment requirements on IO regions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3c148ce2acbe284b40126e331d8f372839817e73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77167
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds BMP image header and BLT header macros in
`efi_datatype.h` to implement a converter inside coreboot FSP 2.0
driver that converts any input *.BMP image into the BLT buffer.
The output BLT buffer is used by FSP-S to render any pre-boot display.
Added `Bmp.h` and `GraphicsOutput.h` files for `UDK base >= 2017`,
as these files were added with the UDK version 2017.
Note: BLT in UEFI BMP implementation stands for `Bit-block transfer`.
It is a method of copying graphis data (specifically images and fonts)
from one location to another (framebuffer), where the data is stored
in blocks of bits.
BUG=b:284799726
TEST=Able to build and boot google/rex.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4e282d135007d288aadb5996a662524f76428874
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76920
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I435557f636a227e2d8c6c413a4d928e58a471dec
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77111
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I20fe63e93121b3b791e6d475e948b6ada648293b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77073
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Neither cap, hcdn_reg, disable_relaxed_ordering nor ht_link_up are used,
so drop the fields from struct bus.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I655b028107da7ddcb5caa03dab55b022387e7cb9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77072
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Once platform code has filled in the (legacy) ACPI PM register
map, added function will fill in the extended entries in FADT.
TEST=samsung/lumpy and amd/mandolin FADT stays unchanged.
Change-Id: I90925fce35458cf5480bfefc7cdddebd41b42058
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74913
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I4e5032fd02af7e8e9ffd2e20aa214a8392ab6335
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76070
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I9e6544c956cb3d516d2e5900357af9ae8976cc8e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76131
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I3d5838b825c6ac2a2959388381004993024081c3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76813
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I53ffa4b35d35d4f8b0170377041b258d4bd2eeeb
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76777
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I688bef264ff41b2a9755133698880fa397f652d4
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76755
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ica6b2d79d61558706998edbbaee185125ff5b36c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76296
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
acpi.c contains architectural specific things like IOAPIC, legacy IRQ,
DMAR, HPET, ... all which require the presence of architectural headers.
Instead of littering the code with #if ENV_X86 move the functions to
different compilation units.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I5083b26c0d4cc6764b4e3cb0ff586797cae7e3af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76008
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Copied from Linux kernel.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I09f84e63346a270f1c7b77e8088b114800ff4864
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75923
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add and use a define for the total number of P-state MSRs to avoid magic
constants in the code.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I37a89faa0f216790b3404fc03edc62408684cc24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Intel SPR supports up to 64 DIMMs on a 4 socket board.
Bump DIMM_INFO struct to 64 slots to properly present all
of them to the OS.
Change-Id: I52d77c4e9bff96adba6d265a272e0e425dbdb791
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73367
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
|
|
In the JPEG decoder, use `bytes_per_line` instead of `width` for
address calculations, to allow for bigger framebuffers. When
calling jpeg_decode(), add an offset to the framebuffer address
so the picture gets centered.
Change-Id: I0174bdccfaad425e708a5fa50bcb28a1b98a23f7
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76424
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Split wait-loop for DP and HPD flags as below -
- google_chromeec_wait_for_hpd
- google_chromeec_wait_for_dp_mode_entry
BUG=b:247670186
TEST=Verify display over TCSS and its impact on boot time for
google/rex
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I3e565d6134f6433930916071e94d56d92dc6cb06
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76370
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Tested by booting System76 Adder WS 3 (addw3) and Serval WS 13 (serw13)
to edk2 payload and then OS.
Ref: Intel Raptor Lake EDS, Volume 1 (#640555, rev. 2.8)
Change-Id: I6098e9121a3afc4160c8a0c96d597e88095fd65d
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
GMBus is an I2C compatible link on Intel IGPUs. Most non-Linux OS's
don't support accessing this ordinarily, so a custom driver is
needed with a bit of ACPI hackery. Reserve 2 IDs from the
coreboot namespace so that the 2 devices required can be populated
in Windows device manager
Change-Id: I389612441e96ce2fc5e006051e523661953eba6e
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Change-Id: I68416e1633c3d67070790a9db2cd9a13a8981042
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76192
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In newer ADL/RPL PCH EDS 619362 revision 2.1 the ESPI ID 0x7A8A
belongs to the W790 chipset. Earlier revisions had the chipset with
ID 0x7A8A named W685, which was probably just a temporary name.
Change the naming throughout the tree to W790, which is the real
existing chipset.
Change-Id: I87603298d655e9bf898b34acdd5b403f5affaee3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76191
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
CPUID is the same for Alder Lake and Raptor Lake S and HX variants.
To reduce the confusion and concerns how to name the macros, remove
the suffixes from macros and platform reporting strings. Thankfully
the stepping names are unique across mobile (P suffixed) and desktop
(S and HX suffixed) SKUs. Distinguishing the S from HX is possible via
host bridge PCI ID.
Change-Id: Ib08fb0923481541dd6f358cf60da44d90bd75ae2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76203
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
|
|
Add PCI IDs, default VR values and power limits for Raptor Lake S
CPUs. Based on docs 639116 and 640555.
TEST=Tested on a MSI PRO Z690-A (ms7d25) with i9-13900K with Ubuntu
22.10 and LinuxBoot (Linux + u-root). Also tested on MSI PRO Z790-P
with i5-13600K (UEFI Payload) usign RPL-S IoT FSP and Ubuntu 22.04.
Change-Id: I767dd08a169a6af59188d9ecd73520b916f69155
Signed-off-by: Max Fritz <antischmock@googlemail.com>
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69798
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
Attempting to use X2APIC MSRs before the call to enable_lapic()
is made raises exception and double-faults.
Change-Id: Ib97889466af0fbe639bec2be730784acc015b525
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76194
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Ic00358ee5b05d011a95d85ec355adef71c39a529
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76193
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds CPU ID for C0 stepping (aka QS).
DOC=#723567
TEST=Able to boot on C0 rvp (and rex) and get correct CPU Name in coreboot log.
Change-Id: I53e3b197f2a0090e178877c1eef783b41670ca83
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76135
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TESTED works on IO and MMIO console with linux using 'earlycon=' in the
commandline argument.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I64e624c17a27b9215a8ba83bd6cbb2c0a7aa1dfc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75685
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree.
BUG=b:281479111
TEST=emerge-dedede coreboot and read correct value on dibbi
Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com>
Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679
Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com>
Reviewed-by: Super Ni <super.ni@intel.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
SMBIOS is not specific to architecture, and this is mostly a generic
implementation. Therefore, move it to common code, having
architecture-specific code define some functions to fill this data.
Change-Id: I030c853f83f8427da4a4c661b82a6487938b24e6
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75886
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The argument is copied into current and is never modified.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I3084e43ccbe9749bc726af3120decfe8b52e1709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75902
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move fw_config_is_provisioned() implementation to header file and make
it static inline.
Signed-off-by: Jakub Czapiga <jacz@semihalf.com>
Change-Id: I2ea21b19339cd93ba78dbe25213cbfb40e012937
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75835
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In soc/amd this function is unused so drop it and rename
_acpi_fill_ivrs_ioapic().
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic403fd84cb9cd5805fbc6f0c5a64cefbf4b0cd81
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75711
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ieca5d8d175923f690ebfa3108e393e029ea97c80
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75732
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I46d5caa0af95ec27fd49b0cf8fa704d656c89e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75684
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In case the secure memory encryption is enabled, some of the upper
usable address bits of the host can't be used any more. Bits 11..6 in
CPUID_EBX_MEM_ENCRYPT indicate how many of the address bits are taken
away from the usable address bits in the case the secure memory
encryption is enabled.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia810b0984972216095da2ad8f9c19e37684f2a2e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75623
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since we now explicitly compile both ramstage and smihandler code
without floating point operations and associated registers we don't need
to save/restore floating point registers.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I180b9781bf5849111501ae8e9806554a7851c0da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75317
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
To support the localized text, we need to get the locale id by vboot
APIs and read raw string content file: preram_locales located at either
RO or RW.
The preram_locales file follows the format:
[string_name_1] [\x00]
[locale_id_1] [\x00] [localized_string_1] [\x00]
[locale_id_2] [\x00] [localized_string_2] ...
[string_name_2] [\x00] ...
This code will search for the correct localized string that its string
name is `memory_training_desc` and its locale ID matches the ID vb2api
returns. If no valid string found, we will try to display in English
(locale ID 0).
BUG=b:264666392
BRANCH=brya
TEST=emerge-brya coreboot chromeos-bmpblk chromeos-bootimage
Change-Id: I7e3c8d103c938a11b397c32c9228e44e31c3f01d
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75330
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
It adds simple function, which frees the memory which
could be allocated by pci_rom_probe(). In the next step
it will be modified to free only memory, which was mapped
from CBFS.
BUG=b:278264488
TEST=Build and run with additional debug prints added
to confirm that data are correctly unmapped
Change-Id: Ibc9aad34b6bf101a3a0c06b92ed2dc6f2d7b9b33
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74778
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move microcode load/unload to pre_mp_init and post_mp_init callbacks.
It allows to make sure that ucode is freed only if all APs updated
microcode.
BUG=b:278264488
TEST=Build and run with additional debug prints added
to confirm that data are correctly unmapped
Change-Id: I200d24df6157cc6d06bade34809faefea9f0090a
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74777
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Implementation of enable/disable cache functions aren't complex,
simply drop cr0 variable usage, still maintains good readablity.
Signed-off-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Change-Id: I81688e8bbb073e1d09ecf63f3f33e1651dbd778e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75552
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch refers and backport some of previous work from Linux Kernel
(https://lore.kernel.org/all/1561689337-19390-3-git-send-email-ricardo.
neri-calderon@linux.intel.com/T/#u) that optimizes the MTRR register
programming in multi-processor systems by relying on the CPUID
(self-snoop feature supported).
Refer to the details below:
Programming MTRR registers in multi-processor systems is a rather
lengthy process as it involves flushing caches. As a result, the
process may take a considerable amount of time. Furthermore, all
processors must program these registers serially.
`wbinvd` instruction is used to invalidate the cache line to ensure
that all modified data is written back to memory. All logical processors
are stopped from executing until after the write-back and invalidate
operation is completed.
The amount of time or cycles for WBINVD to complete will vary due to the
size of different cache hierarchies and other factors. As a consequence,
the use of the WBINVD instruction can have an impact on response time.
As per measurements, around 98% of the time needed by the procedure to
program MTRRs in multi-processor systems is spent flushing caches with
wbinvd(). As per the Section 11.11.8 of the Intel 64 and IA 32
Architectures Software Developer's Manual, it is not necessary to flush
caches if the CPU supports cache self-snooping (ss).
"Flush all caches using the WBINVD instructions. Note on a processor
that supports self-snooping, CPUID feature flag bit 27, this step is
unnecessary."
Thus, skipping the cache flushes can reduce by several tens of
milliseconds the time needed to complete the programming of the MTRR
registers:
Platform Before After
12-core (14 Threads) MeteorLake 35ms 1ms
BUG=b:260455826
TEST=Able to build and boot google/rex.
Change-Id: I83cac2b1e1707bbb1bc1bba82cf3073984e9768f
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75511
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
This patch removes the wbinvd call preceding CR0.CD setting in
disable_cache() to improve the boot time performances. According to
some experimental measurements, the wbinvd execution takes between 1.6
up and 6 milliseconds to complete so it is preferable to call it only
when necessary.
According to Intel Software Developer Manual Vol 3.A - 12.5.3
Preventing Caching section there is no need to flush and invalidate
the cache before settings CR0.CD. The documented sequence consists in
setting CR0.CD and then call wbinvd.
We also could not find any extra requirements in the AMD64
Architecture Programmer’s Manual - Volume 2 - Memory System chapter.
This extra wbinvd in coreboot disable_cache() function does not seem
documented and looking into the history of the project got us all the
way back to original commit 8ca8d7665d67 ("- Initial checkin of the
freebios2 tree") from April 2003.
Even the original disable_cache() implementation (see below) is a bit
curious as the comment list two actions:
1. Disable cache cover by line 74, 75 and 77
2. Write back the cache and flush TLB - Line 78
But it does not provide any explanation for the wbinvd call line 76.
68 static inline void disable_cache(void)
69 {
70 unsigned int tmp;
71 /* Disable cache */
72 /* Write back the cache and flush TLB */
73 asm volatile (
74 "movl %%cr0, %0\n\t"
75 "orl $0x40000000, %0\n\t"
76 "wbinvd\n\t"
77 "movl %0, %%cr0\n\t"
78 "wbinvd\n\t"
79 :"=r" (tmp)
80 ::"memory");
81 }
BUG=b/260455826
TEST=Successful boot on Skolas and Rex board
Change-Id: I08c6486dc93c4d70cadc22a760d1b7e536e85bfa
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75474
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
|
|
Improve boot time performances by replacing the wbinvd instruction
with multiple clflush to ensure that the SIPI data is written back to
RAM.
According to some experimental measurements, the wbinvd execution
takes between 1.6 up and 6 milliseconds to complete. In the case of
the SIPI data, wbinvd unnecessarily flushes and invalidates the entire
cache. Indeed, the SIPI module is quite small (about 400 bytes) and
cflush'ing the associated cache lines is almost instantaneous,
typically less than 100 microseconds.
BUG=b/260455826
TEST=Successful boot on Skolas and Rex board
Change-Id: I0e00db8eaa6a3cb41bec3422572c8f2a9bec4057
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Suggested-by: Erin Park <erin.park@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75391
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
The acpigen_resource_[bus_number,io,mmio*] functions didn't make it very
clear that they are generating resource producer ranges and not resource
consumer ranges. To clarify this, change the function names to
acpigen_resource_producer_[bus_number,io,mmio*] and explicitly add the
ADDR_SPACE_GENERAL_FLAG_PRODUCER flag which evaluates to 0, so this
doesn't change the functionality.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I334f38aa8ab418d5577f92b980ff750504e2bb4e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75486
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Add the acpigen_resource_mmio helper function to generate an MMIO range
resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I38d55dfcc2892bcb5d253a3aef6ed993cfdba0a5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
"extern" is automatically implied with function declaration.
Change-Id: Ic40218acab5a009621b6882faacfcac800aaf0b9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71890
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The CS42L42 low power audio codec can be connected over SoundWire and
be configured for mainboards to use:
- Data Port 0 and Bulk Register Access
- Data Port 1 is the 64bit data output for the headset
- Data Port 2 is the 64bit data input for the headset
- Data Port 3 is the 64bit data input for the headset
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 0.
chip drivers/soundwire/cs42l42
register "desc" = ""Headset Codec""
device generic 0.0 on end
end
This driver was tested with the rex0 reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW00)
{
Name (_ADR, 0x00001001FA424200) // _ADR: Address
Name (_DDN, "Headset Codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0166
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0167
}
})
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "irq-gpios",
Package () { \_SB.PCI0.HDAS.SNDW.SW00, Zero, Zero, Zero }
},
Package () { "reset-gpios",
Package () { \_SB.PCI0.HDAS.SNDW.SW00, One, Zero, Zero }
},
Package () { "cirrus,ts-inv", One },
Package () { "cirrus,ts-dbnc-rise", 0x05 },
Package () { "cirrus,ts-dbnc-fall", Zero },
Package () { "cirrus,btn-det-init-dbnce", 0x64 },
Package () { "cirrus,btn-det-event-dbnce", 0x0A },
Package () { "cirrus,bias-lvls",
Package () { 0x0F, 0x08, 0x04, One }
},
Package () { "cirrus,hs-bias-ramp-rate", 0x02 },
Package () { "cirrus,hs-bias-sense-disable", One },
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
Package () { "mipi-sdw-source-port-list", 0x02 },
Package () { "mipi-sdw-sink-port-list", 0x0C }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-2-sink-subproperties", "SNK2" },
Package () { "mipi-sdw-dp-3-sink-subproperties", "SNK3"}
}
})
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x00AC4400, ... }
},
Package () { "mipi-sdw-bra-mode-max-data-per-frame", 0x1000 },
Package () { "mipi-sdw-bra-mode-min-us-between-transactions", Zero }
}
})
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-port-max-wordlength", 0x40 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
})
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00AC4400, ... }
},
Package () { "mipi-sdw-audio-mode-max-sampling-frequency", 0x0002EE00 },
Package () { "mipi-sdw-audio-mode-min-sampling-frequency", 0x1F40 },
[...]
}
})
Name (SRC1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
Name (SNK2, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
Name (SNK3, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
}
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic7cfe2a21c76ba01ad3dea2a5017b28743aeb9f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73279
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MAX98363 smart speaker amp can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is not supported
- Data Port 1 is the 32bit data input for the speaker path
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 2 and has strap
settings configuring it for unique ID 0.
chip drivers/soundwire/max98363
register "desc" = ""Left Speaker Amp""
device generic 2.0 on end
end
This driver was tested with the rex0 reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW20)
{
Name (_ADR, 0x000230019F836300) // _ADR: Address
Name (_DDN, "Left Speaker Amp") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
Package () { "mipi-sdw-source-port-list", Zero },
Package () { "mipi-sdw-sink-port-list", 0x02 }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }
}
})
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00927C00, ... }
},
Package () { "mipi-sdw-audio-mode-sampling-frequency-configs",
Package () { 0x3E80, ... }
},
[...]
}
})
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
}
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ie56109d615759e3e5e32782c8782cb2f47014ec4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73278
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add PCI IDs to support Raptor Point PCH.
Ref: Intel 700 Series PCH Datasheet, Volume 1 (#743835, rev 2)
Change-Id: Iee410ed3179260b08d45f50e8126fb815c686324
Signed-off-by: Jeremy Soller <jeremy@system76.com>
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73437
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Code changes are necessary because `-Wformat` warns about empty
format strings by default.
Change-Id: Ic8021b70f4cd4875b06f196f88b84940c9a79fe0
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75147
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Generate formatted string and ACPI code to print debug string.
For example (with pcie_rp = 1):
acpigen_write_debug_sprintf("calling _ON for RP: %u", pcie_rp);
generates the following ACPI code:
Debug = "calling _ON for RP: 1"
With this new function, the following functions are not needed anymore
and therefore are removed by this patch.
- acpigen_concatenate_string_string()
- acpigen_concatenate_string_int()
- acpigen_write_debug_concatenate_string_string()
- acpigen_write_debug_concatenate_string_int()
BRANCH=firmware-brya-14505.B
TEST=Add above functions in the acpigen code and check the generated
SSDT table after OS boot. Check the debug messages is in the
kernel log when /sys/modules/acpi/parameters/aml_debug_output is
set to '1'.
Change-Id: Id4a42e5854516a22b7bc4559c2ed08680722c5ba
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Zhixing Ma <zhixing.ma@intel.com>
Reviewed-by: Musse Abdullahi <musse.abdullahi@intel.corp-partner.google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add the acpigen_resource_io helper function to generate an I/O range
resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I177f59b52d4dbbff0a3ceeef5fc8c7455cef9ff8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75044
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Add the acpigen_resource_bus_number helper function to generate a bus
number range resource.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ib1f1da3dbe823c6bc4fc30c0622653410cfbf301
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Configure the CMOS bank I/O base addresses with
PC_CMOS_BASE_PORT_BANK* rather than hard-coding as 0x70, 0x72. The
defaults remain the same.
Change-Id: Ie44e5f5191c66f44e2df8ea0ff58a860be88bfcf
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74903
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce acpigen_write_BBN to generate the ACPI method object that
returns the base bus number for a PCI(e) host bridge. When called, the
base_bus_number argument must be the first PCI bus number that got
assigned to the corresponding host bridge.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib67bf42b9c77c262d8a02d8f28ac5cb8482136b9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74991
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This allows mainboards to override available sleep states at runtime.
This is done by adding a IntObj in SSDT that DSDT consumes to override
the available _Sx states.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ic21830c1ef9c183b1e3005cc1f8b7daf7e9ea998
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74762
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
For AMD, replace name RTC_ALT_CENTURY with RTC_CLK_ALTCENTURY
that points to same offset. Since the century field inside
RTC falls within the NVRAM space, and could interfere with
OPTION_TABLE, it is now guarded with config USE_PC_CMOS_ALTCENTURY.
There were no reference for the use of offset 0x48 for century.
Change-Id: I965a83dc8daaa02ad0935bdde5ca50110adb014a
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74601
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
VGA defined the extended ASCII set based on CP437, but the function
vga_write_text() accepts a signed char array.
This will cause unnecessary confusion that if we want to print u with
umlaut (code=129 in CP437), we need to explicitly cast it to -127 in
signed char.
Since we still want to leverage the built-in string utilities
which only accepts const char*, we still need to cast it to signed char
while processing, and cast it back to unsigned once we write into the
frame buffer.
BRANCH=brya
BUG=b:264666392
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: If555bbc05f40ce3f02339c0468afff6dda8b7ded
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Platform needs to implement this to provide information about SCI IRQ
pin and polarity, to be used for filling in ACPI FADT and MADT entries.
Change-Id: Icea7e9ca4abf3997c01617d2f78f25036d85a52f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74337
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
According to ACPI Release 6.5 systems supporting PIC (i8259)
interrupt mechanism need to report IRQ vector for the SCI_INT
field. In PIC mode only IRQ0..15 are allowed hardware vectors.
This change should cover section 5.2.9 to not pass SCI_INT
larger than IRQ15. Section 5.2.15.5 needs follow-up work.
Care should be taken that ioapic_get_sci_pin() is called
after platform code has potentially changed the routing
from the default.
It appears touched all platforms except siemens/mc_aplX
currently program SCI as IRQ9.
Change-Id: I723c207f1dcbba5e6fc0452fe1dbd087fad290ee
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74326
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Change-Id: Ibaf2d7105e7a5da8a50ef32b682978ff55fe31e0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74473
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
These functions are only used in one compilation unit.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6f8282f308506a68b14ce3101f11078cb13709f2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74756
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add the missing 'b' to the 4gb so that get_top_of_mem_above_4gb is in
line with get_top_of_mem_below_4gb.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic9170372d8b0c27d7de3bd04d822c95e2015cb10
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
These strings are now only expanded in lib/identity.c.
This improves ccache hit rates slightly, as one built object file
lib/version.o is used for all variants of a board. Also one built
object file lib/identity.o can become a ccache hit for successive
builds of a variant, while the commit hash changes.
Change-Id: Ia7d5454d95c8698ab1c1744e63ea4c04d615bb3b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The top of memory below 4GB will always fit into 32 bits, so change the
return type accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b463a17f2db3b7a99ff3572f318c9c22aac7431
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Rename amd_topmem and amd_topmem2 to get_top_of_mem_below_4gb and
get_top_of_mem_above_4g to make it clearer what those functions return.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic6e98d94c731af74aea0ce276a9a7e4867e3986f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74589
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Reset function, constants and include are not used outside of scom.c and
not going to be.
Change-Id: Iff4e98ae52c7099954f0c20fcb639eb87af15534
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
|
|
This patch adds CPU ID for B0 stepping (aka ES2).
DOC=#723567
TEST=Able to boot on B0 rvp and get correct CPU Name in coreboot log.
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Change-Id: I8b939ccc8b05e3648c55f8f2a0a391cb08f04184
Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74300
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I592c69e0f52687924fe41189b082c86913999136
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
This avoids some code duplication related to X2APIC mode.
Change-Id: I2cb8676efc1aba1b154fd04c49e53b2530239b4c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Change-Id: I1a39f355733d10ecd43a1da541ab2e66ba13db15
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74310
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
|
|
Ioapic information in the devicetree was only used to set up mptables
but this generic driver was removed (ca5a793 drivers/generic/ioapic:
Drop poor implementation).
This removes the unused remainders from mainboard devicetrees.
Remove ioapic setup from sconfig.
Change-Id: Ib3fef0bf923ab3f02f3aeed2e55cf662a3dc3a1b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71789
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This is needed to generate MADT and SRAT where lapicid for threads need
to be added last. When CPUID leaf '0xB' is not present assume some
defaults that would result in identical ACPI code generation.
Change-Id: I2210eb9b663dd90941a64132aa7154440dc7e5a9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69222
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Don't pass the stub params to the mp_init code.
Change-Id: I070bc00ae5e5bceb6c5b90ea833cc057dd41f6cc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64802
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In the current design the relocatable parameters are used to know the
offset of the 32bit startpoint. This requires back and forward
interaction between the stub, the loader and the mp init code. This
makes the code hard to read.
This is static information known at buildtime, so a better way to deal
with this is to generate a header that contains this offset.
Change-Id: Ic01badd2af11a6e1dbc27c8e928916fedf104b5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64625
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's quite confusing to keep track of lapic ID inside the device
struct and initial lapic ID inside an array.
Change-Id: I4d9f8d23c0b0e5c142f6907593428d8509e4e7bb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64342
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch adds new member 'core_type' to the 'struct apic_path' and
updates core type information.
TEST=Build the code for MTL
Change-Id: I1d34068fd5ef43f8408301bf3effa9febf85f683
Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74088
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
From Meteor Lake onwards Intel FSP will generate the Trace Hub related
HOB if the Trace Hub is configured to save data in DRAM. This memory
region is used by Trace Hub to store the traces for debugging purpose.
This driver locates the HOB and marks the memory region reserved so
that OS does not use it.
Intel Trace Hub developer manual can be found via document #671536 on
Intel's website.
Change-Id: Ie5a348071b6c6a35e8be3efd1b2b658a991aed0e
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This reverts pieces of commit 08135332dd "soc/intel/xeon_sp: Report platform cpu info"
Reason for revert: Due to duplicated definitions this breaks the tree.
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Change-Id: I7bcffe99e4f049e38d9a13c82d38464c64250ee1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74002
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Use the pstate_msr union in get_pstate_info to check if the P state
enable bit is set. Also drop the now unused PSTATE_DEF_HI_ENABLE_SHIFT
and PSTATE_DEF_HI_ENABLE_MASK definitions.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79119e09af79a4bb680a18e93b4a61a049f0080e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73925
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add platform cpu info for known microcode, print cpuid & processor
branding string. This will print as in the following example:
CPU: Intel(R) Xeon(R) Platinum 8468H
CPU: ID 806f6, Sapphire Rapids E3, ucode: 2b000130
CPU: AES supported, TXT supported, VT supported
Change-Id: I9c08fb924aad81608f554523432ab6a549b1b75f
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73391
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Several FSP HOBs processing codes are similar to Intel Cooperlake-SP
codes in soc/intel/xeon_sp/cpx.
Register datasheet please reference Sapphire Rapids EDS Vol2 Doc#612246
and Emmitsburg PCH EDS Doc#606161.
Change-Id: Ia022534e5206dbeec946d3e5f3c66bcb5628748f
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
When cbmem is initialized in romstage and postcar placed in the stage
cache + cbmem where it is run, the assumption is made that these are
all in UC memory such that calling INVD in postcar is OK.
For performance reasons (e.g. postcar decompression) it is desirable
to cache cbmem and the stage cache during romstage.
Another reason is that AGESA sets up MTRR during romstage to cache all
dram, which is currently worked around by using additional MTRR's to
make that UC.
TESTED on asus/p5ql-em, up/squared on both regular and S3 resume
bootpath. Sometimes there are minimal performance improvements
when cbmem is cached (few ms).
Change-Id: I7ff2a57aee620908b71829457ea0f5a0c410ec5b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37196
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The bit position of the P state enable bit in the 8 P state MSRs is
identical for all AMD chips including the family 16h model 30h APU that
lives outside of soc/amd. The other bits in those 8 MSRs are more or
less family- and model-specific.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ia69c33e28e2a91ff9a9bfe95859c1fd454921b77
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73506
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
The XHCI code does not currently contain a structure that corresponds
to the XHCI capability registers. These registers contain various
useful information about the controller. Create a`xhci_capability_regs`
struct to address this.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Change-Id: If38bfde726bd4e5dd314456f25a2b08acd3cd20c
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
The XHCI device functions currently use functions that require a
access to the device tree. Create variant of these functions that can
operate with a resource* as an argument and refactor the existing
device*-based functions to operate by calling the resource*-based
variants. This is useful for stages like SMM that may not have access to
the device tree.
BRANCH=guybrush
BUG=b:186792595
TEST=Ran on skyrim device, verified that XHCI ACPI tables are still
generated correctly.
Change-Id: If5a74f9529d5dc6031ec968ef5f40a9cad5ffbc4
Signed-off-by: Robert Zieba <robertzieba@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69914
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
In certain cases data within protected memmory areas like SMRAM could
be leaked or modified if an attacker remaps PCI BARs to point within
that area. Add support to the existing SMM runtime to allow storing
PCI resources in SMRAM and then later retrieving them.
BRANCH=guybrush
BUG=b:186792595
TEST=builds
Signed-off-by: Robert Zieba <robertzieba@google.com>
Change-Id: I23fb1e935dd1b89f1cc5c834cc2025f0fe5fda37
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
For platforms using X2APIC mode add SRAT x2APIC table
generation. This allows to setup proper SRAT tables.
Change-Id: If78c423884b7ce9330f0f46998ac83da334ee26d
Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
CXL (Compute Express Link) [1] is a cache-coherent interconnect
standard for processors, memory expansion and accelerators.
CXL memory is provided through CXL device which is connected
through CXL/PCIe link, while regular system memory is provided
through DIMMs plugged into DIMM slots which are connected to
memory controllers of processor.
With CXL memory, the server's memory capacity is increased.
CXL memory is in its own NUMA domain, with longer latency
and added bandwidth, comparing to regular system memory.
Host firmware may present CXL memory as specific purpose memory.
Linux kernel dax driver provides direct access to such differentiated
memory. In particular, hmem dax driver provides direct access to
specific purpose memory.
Specific purpose memory needs to be represented in e820 table as
soft reserved, as described in [2].
Add IORESOURCE_SOFT_RESERVE resource property to indicate (memory)
resource that needs to be soft reserved.
Add soft_reserved_ram_resource macro to allow soc/mb code to add
memory resource as soft reserved.
[1] https://www.computeexpresslink.org/
[2] https://web.archive.org/web/20230130233752/https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.10.32&id=262b45ae3ab4bf8e2caf1fcfd0d8307897519630
Signed-off-by: Jonathan Zhang <jonzhang@fb.com>
Change-Id: Ie70795bcb8c97e9dd5fb772adc060e1606f9bab0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52585
Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Instead of adding the P-state number to the PSTATE_0_MSR number to get
the P-state MSR number for the rdmsr call, provide a macro that directly
calculates the MSR number for a given power state. Also drop the unused
PSTATE_[1..4]_MSR definitions which also didn't cover all P-state MSRs
available in the hardware.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: If85acf556efe82c209e1608e56c05f7a2a748403
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73323
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
