summaryrefslogtreecommitdiff
path: root/src/ec/google/chromeec/ec.h
AgeCommit message (Collapse)Author
2024-04-22ec/google/chromeec: Do not fill TypeC ACPI device when UCSI is enabledPavan Holla
Do not fill the ACPI table entry associated with the cros_ec_typec driver once we switch to the UCSI kernel driver. Skip the ACPI entry if EC implements the UCSI_PPM feature, and the CBI flag to enable UCSI is set. BUG=b:333078787 TEST=emerge-brox coreboot chromeos-bootimage Cq-Depend: chromium:5416841 Change-Id: I67dff6445aa7ba3ba48a04d1df3541f880d09d0a Signed-off-by: Pavan Holla <pholla@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-10-16ec/google/chromeec: Add is_battery_present_and_above_critical_thresholdJamie Ryu
This adds is_battery_present_and_above_critical_threshold to check the battery is present and the battery level is above critical level. BUG=b:296952944 TEST=Build rex and check is_battery_present_and_above_critical_threshold returns the correct battery status. Change-Id: Ib38be55bc42559bab4f12d5e8580ddc3e1a6acc1 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-14vc/google/chromeos: Move clear_ec_ap_idle() to common codeDerek Huang
Previously the clear_ec_ap_idle() is implemented in cr50_enable_update.c and be called in the file. Move it to common code so that it can be called in cse_board_reset.c TEST=emerge-brask coreboot Change-Id: I2dbe41b01e70f7259f75d967e6df694a3e0fac23 Signed-off-by: Derek Huang <derekhuang@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77631 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-07-15ec/google/chromeec: Split wait-loop for DP and HPD flagsKapil Porwal
Split wait-loop for DP and HPD flags as below - - google_chromeec_wait_for_hpd - google_chromeec_wait_for_dp_mode_entry BUG=b:247670186 TEST=Verify display over TCSS and its impact on boot time for google/rex Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: I3e565d6134f6433930916071e94d56d92dc6cb06 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76370 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-11-12ec/google/chromeec: Deprecate dev_index from google_chromeec_rebootCaveh Jalali
This removes the dev_index argument from the google_chromeec_reboot API. It's always set to 0, so don't bother passing it. BUG=b:258126464 BRANCH=none TEST=none Change-Id: Iadc3d7c6c1e048e4b1ab8f8cec3cb8eb8db38e6a Signed-off-by: Caveh Jalali <caveh@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69373 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2022-06-24ec/google/chromeec: Remove google_chromeec_vbnv_context()Yu-Ping Wu
With CB:65012, google_chromeec_vbnv_context() is no longer used. Remove it from the codebase. BUG=b:178689388 TEST=./util/abuild/abuild -t GOOGLE_STOUT -a -x Change-Id: I717f600f0f73c3ca932b6a442a9d5b90c35c8f3b Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65326 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-10-06ec/google/chromeec: Update google_chromeec_usb_pd_get_info()Derek Huang
google_chromeec_usb_pd_get_info() is used in ec.c only. Make it static and drop from ec.h. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: I4b3df4223d5c26ea1c1a52b26f7d49fa4c947de8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58060 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Add new API for USB-C mux handlingDerek Huang
Add google_chromeec_get_usbc_mux_info() to obtain USB-C mux related information. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Idc27f23214c2d5b91334ae3efe248100329964ba Reviewed-on: https://review.coreboot.org/c/coreboot/+/58059 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Add APIs for USB-C DP ALT modeDerek Huang
Add API to allow AP to send the command to EC to enter DP ALT mode and API to wait for DP HPD event. BUG=b:192947843 TEST=select ENABLE_TCSS_DISPLAY_DETECTION in Kconfig.name. Build coreboot and update your system. Boot the system you will find below message in the coreboot log with or without USB-C display connected: 'HPD ready after %lu ms' or 'HPD not ready after %ldms. Abort.'. Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Id11510c1ff58579ae2cddfe5a4d69646fd84f5c3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/57138 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Update some PD and DisplayPort APIsDerek Huang
1. Update google_chromeec_pd_get_amode() to return bitmask. 2. Update google_chromeec_wait_for_displayport() to handle the updated return value of google_chromeec_pd_get_amode(). 3. Drop google_chromeec_pd_get_amode() from ec.h and make it static because it's not used outside of ec.c. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: I6020c4305e30018d4c97d862c16e8d642c951765 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58058 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-06ec/google/chromeec: Update google_chromeec_usb_pd_control()Derek Huang
Add parameter `active_cable` to obtain the cable type (active or passive) which is needed for USB-C configuration for some SoCs (at least Intel TGL and ADL), change the function name to google_chromeec_usb_pd_get_info() for better understanding. BUG=b:192947843 Signed-off-by: Derek Huang <derek.huang@intel.corp-partner.google.com> Change-Id: Ie91a3096d49d5dde75e60ab0f2f38152cef720f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58057 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2021-10-05src/acpi to src/lib: Fix spelling errorsMartin Roth
These issues were found and fixed by codespell, a useful tool for finding spelling errors. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5b8ecdfe75d99028fee820a2034466a8ad1c5e63 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58080 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-06-30ec/google: Use EC_HOST_EVENT_NONERob Barnes
google_chromeec_get_event returns 0 for no event. Return EC_HOST_EVENT_NONE=0 to improve readability. BUG=b:184074997 TEST=Build and boot guybrush without error Signed-off-by: Rob Barnes <robbarnes@google.com> Change-Id: Ic08ed9ccdd7c0023d0fe8b641fcf60dca495a242 Reviewed-on: https://review.coreboot.org/c/coreboot/+/55547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-01-18ec/google/chromeec/ec.h: Remove repeated wordElyes HAOUAS
Change-Id: I7f567f2b4c582e4b2bb102ef0e0f68c5bf6cfb9e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49515 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jacob Garber <jgarber1@ualberta.ca>
2021-01-08ec/google/chromeec: add SSFC CBI supportMarco Chen
An API is added to get SSFC value from cros EC. BUG=b:174118027 BRANCH=octopus TEST=check SSFC value from EC is correct compared to value in CBI Change-Id: Ifd521514bbc2e90c789f3760b72e8326e614e2b1 Signed-off-by: Marco Chen <marcochen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/48791 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jett Rink <jettrink@google.com> Reviewed-by: Zhuohao Lee <zhuohao@chromium.org>
2020-11-18ec/google/chromeec: Add more wrappers for regulator controlYidi Lin
google_chromeec_regulator_enable is for enabling/disabling the regulator. google_chromeec_regulator_is_enabled is for querying if the regulator is enabled. BUG=b:168863056,b:147789962 BRANCH=none TEST=emerge-asurada coreboot Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Change-Id: Ia804242042b0026af19025a0c4a74b3ab8475dab Reviewed-on: https://review.coreboot.org/c/coreboot/+/46686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-30fw_config: Convert fw_config to a 64-bit fieldTim Wawrzynczak
We all knew this was coming, 32 bits is never enough. Doing this early so that it doesn't affect too much code yet. Take care of every usage of fw_config throughout the codebase so the conversion is all done at once. BUG=b:169668368 TEST=Hacked up this code to OR 0x1_000_0000 with CBI-sourced FW_CONFIG and verify the console print contained that bit. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6f2065d347eafa0ef7b346caeabdc3b626402092 Reviewed-on: https://review.coreboot.org/c/coreboot/+/45939 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-10-20ec/google/chromeec: Add wrappers to get/set the voltageYidi Lin
Add APIs to get and set the voltage for the target regulator. BUG=b:147789962 BRANCH=none TEST=emerge-asurada coreboot Change-Id: I0e56df45fc3309c387b9949534334eadefb616b2 Signed-off-by: Yidi Lin <yidi.lin@mediatek.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46404 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2020-10-14src/ec/google/chromeec: Get Type-C Mux info from EC (TCPM)Divya Sasidharan
EC being the TCPM decides the mux configuration after negotiating with the port partner on the Type-C port. The APIs added here will give the current essential mux state information for a given port. BUG=None BRANCH=None TEST=Built coreboot image and verified that using this patch mux is being set for display during boot Change-Id: If994a459288ef31b0e6da8c6cdfd0ce3a0303981 Signed-off-by: Divya Sasidharan <divya.s.sasidharan@intel.com> Signed-off-by: Brandon Breitenstein <brandon.breitenstein@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-08-14ec/google/chromeec: Add helper to request AP resetKarthikeyan Ramasubramanian
Add a helper function to initiate AP reset through Embedded Controller (EC). BUG=b:162290856 TEST=Ensure that the EC resets AP on boards where the command is supported. Change-Id: I01d7dfec72a8a3f6d2c4844bc062672e494860d8 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44188 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-05-11treewide: Remove "this file is part of" linesPatrick Georgi
Stefan thinks they don't add value. Command used: sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool) The exceptions are for: - crossgcc (patch file) - gcov (imported from gcc) - elf.h (imported from GNU's libc) - nvramtool (more complicated header) The removed lines are: - fmt.Fprintln(f, "/* This file is part of the coreboot project. */") -# This file is part of a set of unofficial pre-commit hooks available -/* This file is part of coreboot */ -# This file is part of msrtool. -/* This file is part of msrtool. */ - * This file is part of ncurses, designed to be appended after curses.h.in -/* This file is part of pgtblgen. */ - * This file is part of the coreboot project. - /* This file is part of the coreboot project. */ -# This file is part of the coreboot project. -# This file is part of the coreboot project. -## This file is part of the coreboot project. --- This file is part of the coreboot project. -/* This file is part of the coreboot project */ -/* This file is part of the coreboot project. */ -;## This file is part of the coreboot project. -# This file is part of the coreboot project. It originated in the - * This file is part of the coreinfo project. -## This file is part of the coreinfo project. - * This file is part of the depthcharge project. -/* This file is part of the depthcharge project. */ -/* This file is part of the ectool project. */ - * This file is part of the GNU C Library. - * This file is part of the libpayload project. -## This file is part of the libpayload project. -/* This file is part of the Linux kernel. */ -## This file is part of the superiotool project. -/* This file is part of the superiotool project */ -/* This file is part of uio_usbdebug */ Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-28device: Constify struct device * parameter to acpi_fill_ssdt()Furquan Shaikh
.acpi_fill_ssdt() does not need to modify the device structure. This change makes the struct device * parameter to acpi_fill_ssdt() as const. Change-Id: I110f4c67c3b6671c9ac0a82e02609902a8ee5d5c Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40710 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-20google/chromeec: Add wrapper for EC_CMD_GET_KEYBD_CONFIGRajat Jain
Add a wrapper command for the subject command Signed-off-by: Rajat Jain <rajatja@google.com> Change-Id: I29a4021c2ea0d1cbb4a72f56bf2232d8f9c80ac3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40313 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-20google/chromeec: Revise parameters of EC USB PD API callGaggery Tsai
This patch adds voltage and curent parameters in google_chromeec_get_usb_pd_power_info and remove power parameter. Caller could use the voltage and current information to calculate charger power rating. The reason for this change is, some applications need the voltage information to calculate correct system power eg PsysPmax. BUG=b:151972149 TEST=emerge-puff coreboot; emerge-fizz coreboot Change-Id: I11efe6f45f2f929fcb2763d192268e677d7426cb Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39849 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
2020-04-16ec/google/chromeec: add BOARD_VERSION CBI supportAaron Durbin
Obtaining the CBI_TAG_BOARD_VERSION value wasn't in the code base. Add the binding for it so it can be used. BUG=b:153640981 Change-Id: Ie2f289631f908014432596448e56b5048a196a10 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40355 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-04-11ec/google/chromeec: expose failure and unprovisioned SKU id valuesAaron Durbin
Provide CROS_SKU_UNKNOWN and CROS_SKU_UNPROVISIONED defintion so callers can utilize the default and failing value without open coding it. BUG=b:153642124 Change-Id: I447004e9016b6ab3306ea532721494ebbcda741d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40299 Reviewed-by: Edward O'Callaghan <quasisec@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-04-09ec/google/chromeec: Replace uses of ec_current_image with ec_imageFurquan Shaikh
This change replaces all uses of ec_current_image with ec_image since Chromium OS EC has deprecated (sha 78d1ed61d) the use of enum ec_current_image and instead changed it to enum ec_image. BUG=b:149987779 Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I7e45ea6c736b44040561f0f8a80f817ade8db864 Reviewed-on: https://review.coreboot.org/c/coreboot/+/40267 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-04-05src/ec: Use SPDX for GPL-2.0-only filesAngel Pons
Done with sed and God Lines. Only done for C-like code for now. Change-Id: I422d072a9ab3350e364004ba34911cd183fc6612 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40052 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-03-17src (minus soc and mainboard): Remove copyright noticesPatrick Georgi
They're listed in AUTHORS and often incorrect anyway, for example: - What's a "Copyright $year-present"? - Which incarnation of Google (Inc, LLC, ...) is the current copyright holder? - People sometimes have their editor auto-add themselves to files even though they only deleted stuff - Or they let the editor automatically update the copyright year, because why not? - Who is the copyright holder "The coreboot project Authors"? - Or "Generated Code"? Sidestep all these issues by simply not putting these notices in individual files, let's list all copyright holders in AUTHORS instead and use the git history to deal with the rest. Change-Id: I89b10076e0f4a4b3acd59160fb7abe349b228321 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39611 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Hendricks <david.hendricks@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-03-06ec/google/chromeec: Fix dev ops for chromeecFurquan Shaikh
CB:38541 ("ec/google/chromeec: Add SSDT generator for ChromeOS EC") added a new device_operations structure for chromeec for handling ACPI SSDT generation. However, this resulted in the original device_operations which handled lpc read resources to be skipped. This change fixes the above regression by combining the device operations for reading resources and ACPI SSDT generation into a single structure and retains the old logic for enabling of pnp devices. Signed-off-by: Furquan Shaikh <furquan@google.com> Change-Id: I3a242f4b15603f957e0e81d121e5766fccf3c28d Reviewed-on: https://review.coreboot.org/c/coreboot/+/39321 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2020-02-28ec/google/chromeec: Introduce SKU_ID helpersEdward O'Callaghan
The following introduces helpers that, by default, accommodate a larger SKU id space. The following is the rational for that: Allow INT32_MAX SKU id encodings beyond UINT8_MAX. This allows for the SKU id to accommodate up to 4 bytes however we reserve the highest bit for SKU_UNKNOWN to be encoded. However, the legacy UINT8_MAX encoding is supported by leveraging the Kconfig by overriding it with the legacy max of 0xff. Follow ups migrate boards to this common framework. V.2: Fixup array size && drop sku_id SKU_UNKNOWN check and pass whatever is set to userspace as firmware doesn't care about the value. V.3: Use SPDX-License header. BUG=b:149348474 BRANCH=none TEST=tested on hatch. Change-Id: I805b25465a3b4ee3dc0cbda5feb9e9ea2493ff9e Signed-off-by: Edward O'Callaghan <quasisec@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/39018 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-18ec/google/chromeec: Add SSDT generator for ChromeOS ECTim Wawrzynczak
Upcoming patches for the Linux kernel (5.6 ?) would like to consume information about the USB PD ports that are attached to the device. This information is obtained from the CrOS EC and exposed in the SSDT ACPI table. Also, the device enable for this PCI device is moved from ec_lpc.c to a new file, ec_chip.c, where EC-related ACPI methods can live. It still allows other code to call functions on device enable (so that PnP enable for the LPC device still gets called). BUG=b:146506369 BRANCH=none TEST=Verify the SSDT contains the expected information Change-Id: I729caecd64d9320fb02c0404c8315122f010970b Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38541 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-02-01ec/google/chromeec: Add new wrappers for host commandsTim Wawrzynczak
Add new functions to get (from the EC): 1) The number of USB-PD ports 2) The capabilities of each port (EC_CMD_GET_PD_PORT_CAPS) BUG=b:146506369 BRANCH=none TEST=Instrumented calls to these and verified the data Change-Id: I57edbe1592cd28b005f01679ef8a8b5de3e1f586 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38540 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-01-22ec/google/chromeec: add support for fw_config cbi fieldJett Rink
The firmware configuration (fw_config) field is store in the CBI EEPROM and it should be used to make firmware customization instead of sku/variant id. BUG=b:145519081 TEST=builds Change-Id: I790998a29e724ecdff8876cca072267537b7cea6 Signed-off-by: Jett Rink <jettrink@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/38410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-11-18include: Make stdbool.h a separate fileJulius Werner
This patch moves the traditional POSIX stdbool.h definitions out from stdint.h into their own file. This helps for using these definitions in commonlib code which may be compiled in different environments. For coreboot everything should chain-include this stuff via types.h anyway so nothing should change. Change-Id: Ic8d52be80b64d8e9564f3aee8975cb25e4c187f5 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36837 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-10-31ec/google/chromeec: Add EC driver support for software syncTim Wawrzynczak
Quite a few new functions added here in order to support the use-case of performing EC software sync within coreboot. Most of these functions are related to retrieving the EC's hash, and writing a new image into the EC's flash. BUG=b:112198832 BRANCH=none TEST=With whole patch series, successfully performed EC software sync Change-Id: I0d3c5184dbe96f04b92878f2c19c7875503a910a Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36207 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2019-10-29ec/google/chromeec: Clean up ec.[ch]Tim Wawrzynczak
Change all uN integral types to uintN_t. Make the names of host command params/responses consistent. Use static struct initialization to ensure all fields are initialized. BUG=none BRANCH=none TEST=compiles Change-Id: Ibe1e29e88975c85eea215adedc5f5e483243e0d6 Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/36340 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Joel Kitching <kitching@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-23google/chromeos: Support AP watchdog flag from Chrome ECYou-Cheng Syu
After ChromiumOS CL:1293132 and CL:1295890, Chrome EC can store the flag telling if the last reboot was triggered by AP watchdog for some boards (e.g., Kukui). This CL adds a new function google_chromeec_get_ap_watchdog_flag(), which reads the AP watchdog flag from Chrome EC, and updates the tables of reset causes and reset flags. A new Kconfig option CHROMEOS_USE_EC_WATCHDOG_FLAG is added for elog_handle_watchdog_tombstone() to determine if watchdog reset was triggered by the AP watchdog flag from EC instead of the tombstone in AP. BUG=b:109900671,b:118654976 BRANCH=none TEST=test with https://review.coreboot.org/c/coreboot/+/31843 Change-Id: I7a970666a8c6da32ac1c6af8280e808fe7fc106d Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2019-08-23ec/google/chromeec: Update ec_commands.hYou-Cheng Syu
Copy ec_commands.h directly from ChromiumOS EC repository (CL:1520574). Since ec_commands.h already defines usb_charge_mode and only USB_CHARGE_MODE_DISABLED is used in coreboot, enum usb_charge_mode is removed from ec.h. To avoid redefinition of the BIT macro, #ifndef check is added to include/types.h. BUG=b:109900671,b:118654976 BRANCH=none TEST=emerge-kukui -j coreboot Change-Id: I7ed5344fc8923e45e17c3e2a34371db6f80b079d Signed-off-by: You-Cheng Syu <youcheng@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31885 Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-02-26ec/google/chromeec: Clarify return value of google_chromeec_commandDaisuke Nojiri
This patch clarifies the definition of google_chromeec_command. Currently absence of the definition isn't causing any problem because wrapper APIs check 'ret != 0' or wrapper APIs check 'ret < 0' for an interface which returns only negative error codes. However, there is a chance that a new wrapper API will be addedl which check 'ret < 0' to catch errors, assuming other interfaces behave the same. Or existing wrapper APIs will be broken as soon as they're compiled for another interface. BUG=chromium:935038 TEST=none Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Change-Id: I2ce7109b5f2a1d5294f167719730bc1f039ba03f Reviewed-on: https://review.coreboot.org/c/31613 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-11-16ec/google/chromeec: add support for retrieving OEM nameWisley Chen
OEM name can be stored in CBI. This change can support for fetching the OEM name from CBI. BUG=b:118798180 TEST=Verified to get data from CBI Change-Id: I4938c4d60fcad9e1f43ef69cc4441d1653de7e24 Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/29497 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2018-10-18ec/google/chromeec: Use common MEC interfaceDuncan Laurie
Switch to using the common MEC interface instead of the Chrome EC specific code. Tested on a Chell chromebook that has a MEC based Chrome EC to ensure that the EC interface is still functional. Change-Id: Idf26e62c2843993c2df2ab8ef157b263a71a97c9 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/29112 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-09-20ec/google/chromeec: Update google_chromeec_get_board_version prototypeKarthikeyan Ramasubramanian
The helper function to get the board version from EC returns 0 on failure. But 0 is also a valid board version. Update the helper function to return -1 on failure and update the use-cases. BUG=b:114001972,b:114677884,b:114677887 Change-Id: I93e8dbce2ff26e76504b132055985f53cbf07d31 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Tested-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/28576 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com>
2018-08-08ec/google/chromeec: add support for retrieving DRAM part numberAaron Durbin
The DRAM part number can be stored in the CBI data. Therefore, add support for fetching the DRAM part number from CBI. BUG=b:112203105 TEST=Fetched data from CBI on phaser during testing. Change-Id: Ia721c01aab5848ff36e11792adf9c494aa25c01d Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/27945 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-06-01ec/google/chromeec: Initialize SMI mask in google_chromeec_events_initFurquan Shaikh
This change adds smi_events to google_chromeec_event_info and allows mainboards to set SMI mask if current boot type is not S3 wakeup. Change-Id: I899a6af6e57d295b4eac2039c8245ebcc73a42bb Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/26709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-06mainboard/google/fizz: Check HDMI HPD and DisplayPort HPDDaisuke Nojiri
Some type-c monitors do not immediately assert HPD. If we continue to boot without HPD asserted, Depthcharge fails to show pictures on a monitor even if HPD is asserted later. Also, if an HDMI monitor is connected, no wait is needed. If only an HDMI monitor is connected, currently the API always loops until the stopwatch expires. This patch will make the AP skip DisplayPort wait loop if it detects an HDMI monitor. And if an HDMI monitor is not detected, the AP will wait for DisplayPort mode (like before) but also its HPD signal. This patch also extends the wait loop time-out to 3 seconds. BUG=b:72387533 BRANCH=none TEST=Verify firmware screen is displayed even when a type-c monitor does not immediately assert HPD. Verify if HDMI monitor is connected, AP does not wait (and firmware screen is displayed on HDMI monitor). Change-Id: I0e1afdffbebf4caf35bbb792e7f4637fae89fa49 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23816 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-17chromeec: Add google_chromeec_wait_for_displayDaisuke Nojiri
The google_chromeec_wait_for_display API checks whether a display is ready or not. It waits in a loop until EC says it entered DisplayPort alternative mode or times out in 2 seconds. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ieee5db77bd6e147936ea8fc735dcbeffec98c0f8 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23745 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-02-17chromeec: Add google_chromeec_pd_get_amodeDaisuke Nojiri
The google_chromeec_pd_get_amode API checks whether TCPM is in a specified alternate mode or not. BUG=b:72387533 BRANCH=none TEST=See 23746 "mb/google/fizz: Wait until display is ready" Change-Id: Ib9b4ad06b61326fa167c77758603e038d817f928 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23744 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-02-05ec/google: Get OEM ID and SKU ID from ECDaisuke Nojiri
This patch adds EC_CMD_GET_CROS_BOARD_INFO and two APIs to fetch OEM ID and SKU ID from cros EC. CBI abbreviates Cros Board Info. BUG=b:70294260 BRANCH=none TEST=Verify AP log shows expected OEM ID and SKU ID on Fizz. Change-Id: Iff69a2dc0e562d87dd287f79c407f23aeb09fb9e Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/23549 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-01-17google/chromeec: Enable unified host event programming interfaceJenny TC
Unified Host Event Programming Interface (UHEPI) enables a unified host command EC_CMD_PROGRAM_HOST_EVENT to set/get/clear different host events. Old host event commands (0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F) is supported for backward compatibility. But newer version of BIOS/OS is expected to use UHEPI command (EC_CMD_PROGRAM_HOST_EVENT) The UHEPI also enables the active and lazy wake masks. Active wake mask is the mask that is programmed in the LPC driver (i.e. the mask that is actively used by LPC driver for waking the host during suspended state). It is same as the current wake mask that is set by the smihandler on host just before entering sleep state S3/S5. On the other hand, lazy wake masks are per-sleep masks (S0ix, S3, S5) so that they can be used by EC to set the active wake mask depending upon the type of sleep that the host has entered. This allows the host BIOS to perform one-time programming of the wake masks for each supported sleep type and then EC can take care of appropriately setting the active mask when host enters a particular sleep state. BRANCH=none BUG=b:63969337 TEST=verify masks with ec hostevent command on S0,S3,S5 and S0ix 1). Verified wake masks with ec hostevent command on S0,S3,S5 and S0ix 2). suspend_stress_test with S3 and S0ix 3). Verified "mosys eventlog list" in S3 and s0ix resume to confirm wake sources (Lid, power buttton and Mode change) 4). Verified "mosys eventlog list" in S5 resume to confirm wake sources (Power Button) 5). Verified above scenarios with combination of Old BIOS + New EC and New BIOS + Old EC Change-Id: I4917a222c79b6aaecb71d7704ffde57bf3bc99d9 Signed-off-by: Jenny TC <jenny.tc@intel.com> Reviewed-on: https://review.coreboot.org/21085 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-12-08chromeec: Add command to override charger limitDaisuke Nojiri
This patch adds EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT, which overrides the max input current and voltage when a barrel jack adapter supplies power. BUG=b:64442692 BRANCH=none TEST=Boot Fizz. Use chgsup console command to verify the max current and voltage are set as expected. Change-Id: I8c6fc54e519ce13e3db82ee2cecaa96c6eb42d8a Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/22624 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-22chromeec: Change the API for hostevent/wake masks to handle 64-bitFurquan Shaikh
ChromeEC is getting ready to bump up the hostevents and wake masks to 64-bits. The current commands to program hostevents/wake masks will still operate on 32-bits only. A new EC host command will be added to handle 64-bit hostevents/wake masks. In order to prevent individual callers in coreboot from worrying about 32-bit/64-bit, the same API provided by google/chromeec will be updated to accept 64-bit parameters and return 64-bit values. Internally, host command handlers will take care of masking these parameters/return values to appropriate 32-bit/64-bit values. BUG=b:69329196 Change-Id: If59f3f2b1a2aa5ce95883df3e72efc4a32de1190 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-20chromeec: Add function to retrieve usb c charger infoShelley Chen
Add google_chromeec_get_usb_pd_power_info(), which will call the EC_CMD_USB_PD_POWER_INFO host command to retrieve the current and voltage info of the usb c charger. Returns power info in watts. BUG=b:37473486 BRANCH=None TEST=output debug info to make sure that correct power is returned. Change-Id: Ie14a0a6163e1c2699cb20b4422c8062164d92076 Signed-off-by: Shelley Chen <shchen@chromium.org> Reviewed-on: https://review.coreboot.org/21771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-19ec/google/chromeec: Export google_chromeec_log_events in ec.hFurquan Shaikh
This change makes google_chromeec_log_events available to callers outside ec.c. BUG=b:67874513 Change-Id: I36cc1e66e035eda707297d8153cd3fabeadfee45 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22090 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-10-18google/chromeec: Add new helper function to read MKBP eventsFurquan Shaikh
This change adds a new helper function google_chromeec_get_mkbp_event that allows coreboot to query EC for the next available MKBP event. Change-Id: Ia6d64586ca62378d08025c96c2689c00c816041f Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/22007 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-08ec/google/chromeec: Add library function google_chromeec_events_initFurquan Shaikh
mainboard_ec_init implemented by all x86-based mainboards using chromeec performed similar tasks for initializing and recording ec events. Instead of duplicating this code across multiple boards, provide a library function google_chromeec_events_init that can be called by mainboard with appropriate inputs to perform the required actions. This change also adds a new structure google_chromeec_event_info to allow mainboards to provide information required by the library function to handle different event masks. Also, google_chromeec_log_device_events and google_chromeec_log_events no longer need to be exported. Change-Id: I1cbc24e3e1a31aed35d8527f90ed16ed15ccaa86 Signed-off-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: https://review.coreboot.org/21877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2017-10-04chromeec: Remove checks for EC in RODaisuke Nojiri
This patch removes checks that ensure EC to be in RO for recovery boot. We do not need these checks because when recovery is requested automatically (as opposed to manually), we show 'broken' screen where users can only reboot the device or request recovery manually. If recovery is requested, Depthcharge will check whether EC is in RO or not and recovery switch was pressed or not. If it's a legitimate manual recovery, EC should be in RO. Thus, we can trust the recovery button state it reports. This patch removes all calls to google_chromeec_check_ec_image, which is called to avoid duplicate memory training when recovery is requested but EC is in RW. BUG=b:66516882 BRANCH=none CQ-DEPEND=CL:693008 TEST=Boot Fizz. Change-Id: I45a874b73c46ea88cb831485757d194faa9f4c99 Signed-off-by: Daisuke Nojiri <dnojiri@chromium.org> Reviewed-on: https://review.coreboot.org/21711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-09-13ec/google: Add command to set APU SKU ID to ECKevin Chiu
EC needs to have command to set SKU ID from APU to support specific feature (ex: keyboard backlight) for variant board. BUG=b:65359225 BRANCH=reef TEST=emerge-snappy coreboot Change-Id: I8cd3b8f646d4134d6bfff2869f6df2d9c615c157 Signed-off-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-on: https://review.coreboot.org/21504 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-08-15ec/google: Add command to fetch SKU ID from ECPatrick Georgi
BUG=b:64468585 BRANCH=none TEST=with the other sku-id related patches applied, coreboot obtains the right SKU ID from EC Change-Id: I82e324407b4b96495a3eb3d4caf110f9eae05116 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/20946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-01ec/google/chromeec: Add support for EC device eventsDuncan Laurie
Add support for the new EC device event interface which is used to report events from devices that are connected behind the EC. This can be used to differentiate wake sources from the EC in the case that the EC has the wake pins from various devices. This can be used in case the AP is unable to directly wake from the device itself, for example when using the Deep S3 state on Intel platforms only a few pins can directly wake the AP. BUG=b:30624430 TEST=build google/* boards that use chrome EC. Feature is used and tested further in a subsequent commit. Change-Id: I5126c6d6ffb6b0ef6e8db8dcd5aec62db925a371 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/20426 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2017-05-05ec/google/chromeec: provide reboot functionAaron Durbin
Provide a common function to issue reboot commands to the EC. Expose that function for external use and use it internal to the module. BUG=b:35580805 Change-Id: I1458bd7119b0df626a043ff3806c15ffb5446c9a Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/19573 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Vadim Bendebury <vbendeb@chromium.org>
2016-12-06google/chromeec: Add command to control USB PD roleJulius Werner
Normally firmware should have no business messing with the USB PD role (source/sink/whatever) in the EC. But, as so often happens, ugly issues crop up that require weird work-arounds, and before you know it you need to do this for some reason that only makes sense in context. I do now, so add this function to send the necessary host command in the simplest possible fashion. BRANCH=gru BUG=chrome-os-partner:59346 TEST=Used it in a follow-up patch. Change-Id: I07d40feafd6a8387a633d6384efb205baf578d76 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8b71767caccff9b77d458182ce8066f7abf6321c Original-Change-Id: Ie8d0be98f6b703f4db062fe2f728cd2588347202 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/413030 Original-Reviewed-by: Vincent Palatin <vpalatin@chromium.org> Reviewed-on: https://review.coreboot.org/17627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-07-28bootmode: Get rid of CONFIG_BOOTMODE_STRAPSFurquan Shaikh
With VBOOT_VERIFY_FIRMWARE separated from CHROMEOS, move recovery and developer mode check functions to vboot. Thus, get rid of the BOOTMODE_STRAPS option which controlled these functions under src/lib. BUG=chrome-os-partner:55639 Change-Id: Ia2571026ce8976856add01095cc6be415d2be22e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/15868 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-05-13ec/google/chromeec: don't guard function declarationsAaron Durbin
In order to allow using the same C source to be compiled for multiple stages (with #if/#endif guards) one needs the necessary function delcarations. Therefore, remove the guards. Change-Id: Iea94d456451c5d3db8b8b339e81163b3b3fed3ed Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14796 Reviewed-by: Duncan Laurie <dlaurie@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-11ec/google/chromeec: provide way to query ioport rangeAaron Durbin
In order to provide other stages access to the ioport range required by the ChromeEC provide google_chromeec_ioport_range() function to fill in the details. Currently, the ioport range is only consumed by the LPC implemenation. Also allow ec_lpc.c to be built for the bootblock stage. Change-Id: I6c181b42e80e71fe07e8fa90df783107287f16ad Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14769 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-06ec/google/chromeec/ec_lpc: Declare used IO ports as a resourceAlexandru Gagniuc
Chrome EC uses IO ports 0x800 -> 0x9ff to communicate over LPC; however, those ports were not declared as a resource. This had two major downsides: * It allowed the allocator to assign said ports to other devices * It required manually open up an IO window in the LPC bridge. The LPC bridge on many chromeec boards had to be painstakingly adjusted to meet these constraints. The advantage of declaring the resources upfront is that the lpc bridge can now scan its child resources and automatically open up IO windows, as requested by its LPC children devices. Change-Id: I35c4e48dddb7300674d7a9858b590c1f20e3b0e3 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/14585 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-04google/chromeec: Add temporary storage interfaceDuncan Laurie
Add support functions for the Chrome EC temporary storage interface. BUG=chrome-os-partner:46049 BRANCH=none TEST=tested on glados with modified coreboot Change-Id: Id2bc46df9cb2d82b15e3309e78d07407a622b6f0 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7e6f693666b162e11eb0611715f10a8f465ad88 Original-Change-Id: Ieefabfc5bcb9d8a5064f0da967c46d0f377ca320 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/315217 Original-Commit-Ready: Aaron Durbin <adurbin@chromium.org> Original-Tested-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-10-31tree: drop last paragraph of GPL copyright headerPatrick Georgi
It encourages users from writing to the FSF without giving an address. Linux also prefers to drop that and their checkpatch.pl (that we imported) looks out for that. This is the result of util/scripts/no-fsf-addresses.sh with no further editing. Change-Id: Ie96faea295fe001911d77dbc51e9a6789558fbd6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/11888 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2015-08-27chromeec: Add helper function to read EC switch stateDuncan Laurie
Add a helper function to read the EC switch state on LPC based ECs instead of having each board need to understand and use the specific EC LPC IO method that is required. BUG=chrome-os-partner:43515 BRANCH=none TEST=build and boot on glados Original-Change-Id: Id046c7ddf3a1689d4bf2241be5da31184c32c0e1 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/293514 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Change-Id: Id11009e0711b13823e4f76dc9db9c9c20abf4809 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/11280 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-21Remove address from GPLv2 headersPatrick Georgi
As per discussion with lawyers[tm], it's not a good idea to shorten the license header too much - not for legal reasons but because there are tools that look for them, and giving them a standard pattern simplifies things. However, we got confirmation that we don't have to update every file ever added to coreboot whenever the FSF gets a new lease, but can drop the address instead. util/kconfig is excluded because that's imported code that we may want to synchronize every now and then. $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, *MA[, ]*02110-1301[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 51 Franklin Street, Suite 500, Boston, MA 02110-1335, USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 59 Temple Place[-, ]*Suite 330, Boston, MA *02111-1307[, ]*USA:Foundation, Inc.:" {} + $ find * -type f -exec sed -i "s:Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.:Foundation, Inc.:" {} + $ find * -type f -a \! -name \*.patch \ -a \! -name \*_shipped \ -a \! -name LICENSE_GPL \ -a \! -name LGPL.txt \ -a \! -name COPYING \ -a \! -name DISCLAIMER \ -exec sed -i "/Foundation, Inc./ N;s:Foundation, Inc.* USA\.* *:Foundation, Inc. :;s:Foundation, Inc. $:Foundation, Inc.:" {} + Change-Id: Icc968a5a5f3a5df8d32b940f9cdb35350654bef9 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/9233 Tested-by: build bot (Jenkins) Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
2015-04-22chromeec: lpc: Add variant MEC IOShawn Nematbakhsh
MEC cannot access memmap-range data directly though LPC and instead must access through its EMI unit. BUG=chrome-os-partner:38224 TEST=Verify host command functionality on glower. BRANCH=None Change-Id: If98d425014a894ddeafad4268f92af5860878522 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 58ed3c50ab97ca1e172d5cdc00f4cd8e069e565c Original-Change-Id: I32b897836d28ef4f3b3aa5f81b9023f2ceb629c8 Original-Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/263611 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/9910 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2015-04-02chromeec: Add commands to check PD image typeDuncan Laurie
Coreboot needs to be able to reboot the PD controller into RO image in recovery mode early in the boot process in order to avoid a lengthy recovery mode boot if it is only done at vboot software sync time. In order to do this a new device index field is added to the command structure which must be initaalized to zero for all EC transactions. This early init and image check code is only used in romstage so include it in the __PRE_RAM__ block. BUG=chrome-os-partner:30079 BRANCH=none TEST=build and boot on samus EVT in recovery mode and see that the PD is rebooted to RO mode early in the boot. Change-Id: Iee60aae4d49b83b4a377b71e41e8109858a90223 Signed-off-by: Stefan Reinauer <reinauer@chromium.org> Original-Commit-Id: b36cf37d9b5a7053ecbd15c748eac84836d413e1 Original-Change-Id: Iebc48709b527d3571618da775c849e1c3fcd6384 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/218903 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/9204 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-03-21chromeec: allow transport implementation to provide buffers for proto v3Aaron Durbin
Depending on the transport mechanism for proto v3 different bytes need to be send and/or read before the request and response. Depending on the software and/or controller interface that requirement leads to needing to copy data into temporary buffers. Avoid this by allowing the transport mechanism to provide the request and response buffers. BUG=chrome-os-partner:31148 BRANCH=None TEST=Built for rush and ryu. Ran on ryu with i2c implementation. Also built for rambi to check x86 systems. Change-Id: I35d4d69bd1fa900fc0cfe3822496f381405bdcb1 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c7224426e1d0bcf06ed010131a2462a6ca201d8b Original-Change-Id: Iad6cce566a253ca72e6f5009a97235ece0a6c1b5 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/211138 Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Reviewed-on: http://review.coreboot.org/8827 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2014-12-30chromeos: Unconditionally clear the EC recovery requestSheng-Liang Song
Add the empty weak function clear_recovery_mode_switch(). Problem: If GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC is set, the following will happen: 1. Boot device in recovery mode with Esc + F3 + Pwr. 2. Turn device off with Pwr button. 3. Turn device on with Pwr button. Device still boots to recovery screen with recovery_reason:0x02 recovery button pressed. If GBB_FLAG_DISABLE_EC_SOFTWARE_SYNC isn't set, turning the device off and on again with the Pwr button does a normal boot. Solution: Unconditionally clear the recovery flag. BUG=chromium:279607 BRANCH=TOT TEST=Compile OK. Original-Change-Id: Ie1e3251a6db12e75e385220e9d3791078393b1bf Original-Signed-off-by: Sheng-Liang Song <ssl@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/197780 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Randall Spangler <rspangler@chromium.org> Original-Commit-Queue: Sheng-liang Song <ssl@google.com> Original-Tested-by: Sheng-liang Song <ssl@google.com> (cherry picked from commit 18908bb64cef34ca41812814817ef887961bed34) Signed-off-by: Marc Jones <marc.jones@se-eng.com> Change-Id: I71ca9f3ea8d816c865375ec66a0603ca211f23ae Reviewed-on: http://review.coreboot.org/7895 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins)
2014-08-13chromeos: On ARM platforms VBNV lives in the ECStefan Reinauer
This patch renames the x86 way of doing things to explicitly mention CMOS (which is not available on our ARM platforms) and adds an implementation to get VBNV through the Chrome EC. We might want to refine this further in the future to allow VBNV in the EC even on x86 platforms. Will be fixed when that appears. Also, not all ARM platforms running ChromeOS might use the Google EC in the future, in which case this code will need additional work. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Ice09d0e277dbb131f9ad763e762e8877007db901 Reviewed-on: https://chromium-review.googlesource.com/167540 Reviewed-by: David Hendrix <dhendrix@chromium.org> Tested-by: Stefan Reinauer <reinauer@google.com> Commit-Queue: Stefan Reinauer <reinauer@google.com> (cherry picked from commit 8df6cdbcacb082af88c069ef8b542b44ff21d97a) Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com> Reviewed-on: http://review.coreboot.org/6616 Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2014-05-13chromeec: add function to reboot on unexpected imageAaron Durbin
It's helpful to have a generic function that will tell the EC to reboot if the EC isn't running a specified image. Add that and implement google_chromeec_early_init() to utilize the new function still maintaing its semantics of if recvoery mode is enabled the EC should be running its RO image. There is a slight change in that no communication is done with the EC if not in recovery mode. BUG=chrome-os-partner:24133 BRANCH=rambi,squawks TEST=Built and boot with recovery request. Noted EC reboot. Change-Id: I22240f6a11231e39c33fd79796a52ec76b119397 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://chromium-review.googlesource.com/182060 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/5039 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-12-12chromeec: Allow get_board_version to be called from romstage.Shawn Nematbakhsh
We will soon need to call google_chromeec_get_board_version to determine correct DDR SPD. We must do so before DDR is initialized, so allow this function to be called from romstage. Signed-off-by: Shawn Nematbakhsh <shawnn@chromium.org> Change-Id: I882d84e38d11bf66067193a6f408f941f2cf8a81 Reviewed-on: https://gerrit.chromium.org/gerrit/61191 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: Shawn Nematbakhsh <shawnn@chromium.org> Commit-Queue: Shawn Nematbakhsh <shawnn@chromium.org> Reviewed-on: http://review.coreboot.org/4351 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-10chromeec: Add a function to send passthrough i2c messages.Gabe Black
Change-Id: I576d0dbf65693f40d7d1c20d3d5e7a75b8e14dc9 Signed-off-by: Gabe Black <gabeblack@google.com> Reviewed-on: http://review.coreboot.org/3752 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec/google: Support Chrome EC protocol version 3.Hung-Te Lin
Add the new Chrome EC protocol version 3 to Coreboot. Note, protocol version 3 is not applied on any bus implementations yet. LPC (x86) and I2C (arm/snow) are still using v2 protocol. The first one to use v3 protocol will be SPI bus (arm/pit). LPC / I2C will be updated to v3 only when they are ready to change. Change-Id: I3006435295fb509c6351afbb97de0fcedcb1d8c4 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3750 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec/google: Generalize communication protocol support in EC drivers.Hung-Te Lin
Since EC protocol v3, the packet format will be the same for all buses (inclding I2C, SPI, and LPC). That will simplify the implementation in each individual bus driver source file. To prepare for that, we will move the protocol part into crosec_proto.c: crosec_command_proto, with bus driver in callback "crosec_io". Change-Id: I9ccd19a57a182899dd1ef1cd90598679c1546295 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3749 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-07-10ec: Add romstage function for checking and rebooting ECDuncan Laurie
Now that we are executing VbInit() in coreboot we can end up in a situation where the recovery reason is consumed during VbInit (end of romstage) and then the EC is rebooted to RO during ramstage EC init, thereby losing the recovery reason. Two possiblities are to remove the EC check+reboot from ramstage and let it happen in depthcharge. This however means that the system has to boot all the way into depthcharge and then reboot the EC and the system again. Instead if we do a check in romstage before VbInit() is called then we can reboot the EC into RO early and avoid booting all the way to depthcharge first. This change adds a ramstage version the EC init function and calls it from the shared romstage code immediately after the PCH decode windows are setup. Change-Id: I30d2a0c7131b8e4ec30c63eea36944ec111a8fba Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: http://review.coreboot.org/3744 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-16ec/google: Move plug-n-play initialization to LPC protocol.Hung-Te Lin
"Plug-n-play" is not supported on all platforms using Google's Chrome EC. For example, EC on I2C bus will need explicit configuration and initialization. So move the plug-n-play initialization to the LPC implementation. Verified by building Google/Link (with EC/LPC) successfully. Change-Id: I49e5943503fd5301aa2b2f8c1265f3813719d7e3 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3089 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-04-16ec/google: Support Google's Chrome EC on I2C interface.Hung-Te Lin
Google's Chrome EC can be installed on LPC or I2C bus, using different command protocol. This commit adds I2C support for devices like Google/Snow. Note: I2C interface cannot be automatically probed so the bus and chip number must be explicitly set. Verified by booting Google/Snow, with following console output: Google Chrome EC: Hello got back 11223344 status (0) Google Chrome EC: version: ro: snow_v1.3.108-30f8374 rw: snow_v1.3.128-e35f60e running image: 1 Change-Id: I8023eb96cf477755d277fd7991bdb7d9392f10f7 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3074 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-04-12ec/google: Isolate EC bus protocol implementation.Hung-Te Lin
The Chrome EC can be connected by different types of bus like LPC / I2C / SPI, and the current implementation is only for LPC. To support other types, we must first isolate the LPC protocol stuff and add configuration variable (EC_GOOGLE_CHROMEEC_LPC) to specify bus type. Verified by building google/link (with chromeec) configuration successfully. Change-Id: Ib2920d8d935bcc77a5394e818f69e9265e26e8a0 Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: http://review.coreboot.org/3068 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: David Hendricks <dhendrix@chromium.org>
2013-02-22Add support for Google ChromeECStefan Reinauer
Google ChromeEC is an EC with completely open source firmware. See https://gerrit.chromium.org/gerrit/gitweb?p=chromiumos/platform/ec.git;a=summary for the EC firmware source code (aka more information about the ChromeEC) This patch adds support for the ChromeEC on coreboot's side. Great thanks to the ChromeEC team for this amazing work. It's another important milestone towards a free and open firmware stack on modern hardware. Change-Id: Iace78af9d291791d2f5f80ccca1587b418738cec Signed-off-by: Stefan Reinauer <reinauer@coreboot.org> Reviewed-on: http://review.coreboot.org/2481 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martin.roth@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-17 22:05:30 +0000