| Age | Commit message (Collapse) | Author |
|---|
|
This adds DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC to provide
the option to load pre-production or production signed IPU FW from IPU
kernel driver.
BUG=None
TEST=Build rex and brya to check if the build passes without an
error.
Change-Id: Ib507bceb6fd85d8ed764df82db400526a10e4d6e
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77854
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The sta_himax83102 panel sometimes shows abnormally flickering
horizontal lines. The front gate output will precharge the X point of
the next pole circuit before TP term starts, and wait until the end of
the TP term to resume the CLK. For this reason, the X point must be
maintained during the TP term. In abnormal case, we measured a slight
leakage at point X. This is because during the TP term, the GPW does not
fully pull the VGL low, causing the TFT to not be closed tightly.
To fix this, we completely pull GPW to VGL before entering the TP term.
This will ensure that the TFT is closed tightly and prevent the abnormal
display.
BUG=b:299249186
BRANCH=corsola
TEST=FW Screen display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I5dddaaa38917a65990c1474b657db5eb551940b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77692
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I42e995952a72a23a5f3aeadf428ad13f25546854
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77772
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Also move the semicolon on next line.
Change-Id: I68412407ec8c8f99c15f39b0ec08d4fb33eb1b3f
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77155
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ic52f01d1d5d86334e0fd639b968b5eed43a35f1d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77633
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Parentheses are not required.
Change-Id: Iad1f766a3eb569af39030e43365e8a0a609f5944
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77706
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I6ff11df45ddc396391efd651f9938e04646dc0d3
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77707
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
This patch adds support for Intel WIFI-7 series PCIe based WLAN module.
Change-Id: Ia31fdb87e15b50471dc7664e42b1e2625ce1ac58
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77621
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Convert camel case macros to uppercase and underscore separated macros,
such as:
PCI_DID_CyP_6SERIES_WIFI -> PCI_DID_CP_6SERIES_WIFI
PCI_DID_TyP_6SERIES_WIFI -> PCI_DID_TP_6SERIES_WIFI
This makes the macros more consistent with the rest of the code and
easier to read.
Change-Id: I9c739aab93dc0d043a3c9d9ce799087952c1e20b
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77644
Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch refactors the existing MRC cache storing logic, which was
spread between the ROM and RAM stages, into a single early MRC cache
store stage. The only exception is when SoC user selects
FSP_NVS_DATA_POST_SILICON_INIT to store MRC cache from ramstage (after
FSP-S).
It reverts all the boot-state logic previously used to locate and store
MRC cache from NVS HOB into NVS because majority of the platform can
potentially use the early MRC cache store with improved memory caching
at the pre-RAM phase (with the ramtop implementation).
The only exception is the Xeon SP platform, which currently locates
the MRC cache post in FSP-S (at ramstage). Therefore, this patch
provides an API to the FSP 2.x silicon init code to perform late
storing of the MRC cache.
In majority cases the updated logic, the romstage (post FSP-M) will
attempt to save the MRC cache. Platform that selects
FSP_NVS_DATA_POST_SILICON_INIT config performs the same operation post
FSP-S. Depending on whether the MRC_STASH_TO_CBMEM config is
enabled, the MRC cache will either be written directly to NVRAM at the
romstage or stashed into CBMEM for a late NVRAM write at ramstage.
Below table captures the change in the boot state w/ and w/o this
patch for storing the MRC cache. Overall the goal is to ensure the
platform behavior is remain unchanged before and after this patch.
w/o this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | BS_DEV_INIT | BS_DEV | BS_DEV |
| DATA_POST | CHIPS_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | BS_PRE | BS_DEV | BS_DEV |
| w/o above | DEVICE_ENTRY | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
w/ this patch:
| | Save MRC | Finalize | Lock the |
| | Cache | MRC Cache | Boot Medium |
+-----------+----------------+----------------+----------------+
| MRC_WRITE | BS_OS_RESUME | BS_OS_RESUME | BS_ON_RESUME |
| NV_LATE | CHECK_ENTRY | CHECK_ENTRY | CHECK_EXIT |
+-----------+----------------+----------------+----------------+
| MRC_STASH | BS_DEV | BS_DEV | BS_DEV |
| TO_CBMEM | ENUMERATE_EXIT | ENUMERATE_EXIT | RESOURCES_ENTRY|
+-----------+----------------+----------------+----------------+
| FSP_NVS | Post FSP-S | BS_DEV | BS_DEV |
| DATA_POST | (ramstage) | ENUMERATE_EXIT | RESOURCES_ENTRY|
| SILICON | | | |
| INIT | | | |
+-----------+----------------+----------------+----------------+
| Platform | Post FSP-M | BS_DEV | BS_DEV |
| w/o above | (romstage) | ENUMERATE_EXIT | ENUMERATE_ENTRY|
| config | | | |
| (FSP 2.0 | | | |
| platforms | | | |
BUG=b:296704537
TEST=Able to build and boot google/rex without any boot time impact.
Change-Id: Id1e91d25916594f59d1e467a142f5042c6138b51
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77556
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch renames `SAVE_MRC_AFTER_FSPS` config to
`FSP_NVS_DATA_POST_SILICON_INIT` to highlight the violation in the Xeon
SP FSP implementation, where the FSP Silicon Init API produces
Non-Volatile Storage (NVS) instead of the FSP-Memory Init API.
According to the FSP 2.x specification (section 11.3), the FSP
populates the NVS data using the FSP_NON_VOLATILE_STORAGE_HOB and
expects the boot firmware to parse the FSP_NON_VOLATILE_STORAGE_HOB
after the FspMemoryInit() API in API mode.
However, not all Intel SoC platforms that support the FSP 2.x
specification adhere to this requirement. For example, the FSP binary
for XEON SP platform produces NVS data (aka
FSP_NON_VOLATILE_STORAGE_HOB) after the FspSiliconInit() API.
Therefore, attempting to locate NVS data after the FspMemoryInit() API
on these platforms would result in an error. The `save_mrc_data.c`
implementation provides the required hooks to locate the NVS post
FSP-Silicon Init and store into Non-Volatile Storage.
BUG=b:296704537
TEST=Able to build and boot Intel Xeon SP w/o any functional impact.
Change-Id: I815a64263fa1415bfe30bb3c1c35e4adee307e86
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77616
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Johnny Lin <Johnny_Lin@wiwynn.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ic49cb6c67aa707efa6495788137b550683008868
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77594
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add an option to invert write protect polarity for GL9750.
Change-Id: I5761f3066291a2400caecbecc79ae893f0a0c146
Signed-off-by: Ben Chuang <benchuanggli@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77403
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds logic for logging the FW splash screen event to
the event log.
There could be three possible scenarios as below:
1. Platform w/o FW splash screen (i.e., either HAVE_FSP_LOGO_SUPPORT
or BMP_LOGO configs not enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) not
present in the event log.
39 | 2023-08-27 12:42:54-0700 | System boot | 12
40 | 2023-08-27 12:42:54-0700 | ACPI Wake | S5
41 | 2023-08-27 12:42:54-0700 | Wake Source | Power Button | 0
2. Platform w/ FW splash screen (i.e., both HAVE_FSP_LOGO_SUPPORT
and BMP_LOGO configs are enabled)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
enabled in the event log.
34 | 2023-08-27 12:07:29-0700 | System boot | 11
35 | 2023-08-27 12:07:29-0700 | Firmware Splash Screen | Enabled
36 | 2023-08-27 12:07:31-0700 | ACPI Wake | S5
37 | 2023-08-27 12:07:31-0700 | Wake Source | Power Button | 0
3. Failed to render FW splash screen (due to any reason if FSP failed
to render the splash screen)
Expectation: Firmware Splash Screen (ELOG_TYPE_FW_SPLASH_SCREEN) is
disabled in the event log.
43 | 2023-08-27 13:06:10-0700 | System boot | 13
44 | 2023-08-27 13:06:10-0700 | Firmware Splash Screen | Disabled
45 | 2023-08-27 13:06:11-0700 | ACPI Wake | S5
46 | 2023-08-27 13:06:11-0700 | Wake Source | Power Button | 0
BUG=b:284799726
TEST=Verify that the event shows up in the event log when the user
selects the HAVE_FSP_LOGO_SUPPORT and BMP_LOGO configs to display
the firmware splash screen.
Change-Id: Ie9e09acff5443c31b881c300134bc0bb06c490c6
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77509
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
'useable' -> 'usable'.
Change-Id: Iad2e1ef97a5c98ffa6f33806bce5b77722e687e8
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77524
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I9804fcd9076b5a4813f099db0852a5af5ac36609
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77523
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: Idc38c759489976cbdf51d9c4bb950ef6d470b93a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Change-Id: Id7634099e40c0bf97944be124b494c41d6335ad7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77501
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
These Kconfig options were being used basically as #define statements,
which is unnecessary. This isn't a good use of Kconfig options and would
be better just as #defines if actually needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: If987b50d8ec3bb2ab99096e5e3c325e4d90a67a9
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77419
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
When LZMA compression is selected, then it's not needed to check if LZ4
compression is selected in addition. So instead of handling both cases
separately, check for LZ4 only if LZMA is not selected.
This applies to the cases of both, FSP-M and FSP-S.
Change-Id: I4ea61a38baf4c29bf522a50a26c6b47292e67960
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77323
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Fix the issue by adding the "ifeq" keyword which makes the extraneous
text a correct conditional directive.
Change-Id: Id8a8aa7acfdaeb0549f417fb013b2535a7298045
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77286
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
This patch uses the CSE firmware specific data to store Intel
ISH firmware related information. Sending an ISH partition version
information command on every boot cycle would impact the overall boot
performance.
This information is used by the auto-test framework to ensure the ISH
firmware update is proper for in-field devices.
BUG=b:285405031
TEST=Able to build and boot google/rex. Verified ISH FW version is
getting displayed across warm resets without impacting the boot time.
Change-Id: I0242c26dd90d834815799f54740d8147ff9d45b7
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77176
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch adds a new configuration option to allow the compression
algorithm for the logo cbfs file to be specified. By default, the logo
cbfs file is compressed using LZMA. However, enabling LZ4 compression
can save ~2ms of boot time when the BMP_LOGO config is enabled.
This patch verified that the logo cbfs file can be booted using either
LZMA or LZ4 compression.
BUG=b:284799726
TEST=Able to boot google/rex and verified firmware splash screen using
either LZMA or LZ4 compression.
Change-Id: Ib0aa5320632ae3f734004d2b1d495af11c2e1928
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76927
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Set the ACPI device status to hidden, since no driver is necessary or
available under Windows.
Linux is unaffected as it does not use the ACPI device status.
TEST=build/boot Win11 on google/akemi
Change-Id: Ib1e274084400fa47e483267d331e632ceb5be757
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75178
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds an API to convert BMP images into GOP BLT buffers for
Intel FSP-S. This is required to display the OEM splash screen at
pre-boot phase.
Previously, Intel FSP-S had provision to consume the *.BMP file as is.
However, starting with the Alder Lake platform, Intel FSP has dropped
this conversion logic and expects the boot firmware to pass the BLT
buffer directly.
This patch implements the conversion logic in coreboot.
BUG=b:284799726
TEST=Able to build and boot google/rex
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I992b45d65374f09498ff0cab497f7091e1e7a350
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76921
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
It makes no sense to expose these symbols to the user in the menu.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I6eb78d12afdc0828bf5e2d305f033d2f0cf4622a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/77109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
|
|
Width of registers are always dwords on pl011, not bytes.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I955319d31bba5c0cd4d50f2b34111d51fea653ed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76883
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
This is unused - other references were removed long ago.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia7a65f54c736db20a5440795fdfaa8be31ef971f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72767
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
To help identify the licenses of the various files contained in the
coreboot source, we've added SPDX headers to the top of all of the
.c and .h files. This extends that practice to Makefiles.
Any file in the coreboot project without a specific license is bound
to the license of the overall coreboot project, GPL Version 2.
This patch adds the GPL V2 license identifier to the top of all
makefiles in the drivers directory that don't already have an SPDX
license line at the top.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I8442bc18ce228eca88a084660be84bcd1c5de928
Reviewed-on: https://review.coreboot.org/c/coreboot/+/68980
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Tim Crawford <tcrawford@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
header="src/soc/amd/common/block/include/amdblocks/post_codes.h \
src/include/cpu/intel/post_codes.h \
src/soc/intel/common/block/include/intelblocks/post_codes.h"
array=`grep -r "#define POST_" $header | \
tr '\t' ' ' | cut -d ":" -f 2 | cut -d " " -f 2`
for str in $array; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r $str src | cut -d ':' -f 1 | \
xargs sed -i'' -e "s/$str/POSTCODE_$splitstr/g"
done
Change-Id: Id2ca654126fc5b96e6b40d222bb636bbf39ab7ad
Signed-off-by: Yuchen He <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76044
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Change-Id: I9241d713fb8cc26c768746c8e442b46292036d20
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76694
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Ideed4b333632df5068b88dde6f89d3831e3046d1
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76840
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
In the datasheet of ILI9882T [1] section 3.11 Power On/Off Sequence,
the TReset-CMD (Reset to First Command in Display Sleep In Mode) should
be larger than 10ms, but it's 1.1ms now. This may cause abnormal
display as some commands may be lost during power on. Fix this and
leave some margins by increasing TReset-CMD to 20ms. Also, to align
with the kernel driver structure starry_ili9882t_init_cmd, add 20ms
delay at the end of command.
[1] ILI9882T_Datasheet_20220428.pdf
BUG=b:293380212
TEST=Boot and display normally
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ifdcaf0e34753fc906817c763f1c8e7389448d1dc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76766
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: Iab55c57ee5cac60911c9fe4cee8d86a252bde372
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76839
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I7c9c938bd20d36be8fdfb0d95bb58a7259650693
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76801
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I03c21e180e9e399e5cb451bf3b9cfb6484cab68b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76778
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use C99 flexible arrays instead of older style of one-element or
zero-length arrays.
It allows the compiler to generate errors when the flexible array does
not occur at the end in the structure.
Change-Id: I80b4b2df4a38dcbb28d928018446e91acae90ee6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76779
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
There is a problem of screen shake on the old panel[1]. So increase the
panel GOP component pull-down circuit size in hardware, and update the
initialization code at the same time. The new initialization code is
mainly adjusted for GOP timing. When Display sleep in, raise all GOP
signals to VGHO and then drop to GND. In order to be consistent with
the current panel model, let's rename this file.
[1]: INX old panel product number is HJ110IZ-01A-B1, and the new
panel product number is HJ110IZ-01A-B2. We have recalled the shipment
old panel.
BUG=b:270276344
BRANCH=trogdor
TEST= test firmware display pass
Change-Id: I2b2534afee1ed700c39d3c360aafd685b63ccbfb
Signed-off-by: Cong Yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Allows the new Infineon TPM chip used on Clevo laptops to be recognized.
Change-Id: I2ee31b787d80c0b9c24c748b1b28906a22a1dee7
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75807
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
The OxPCIe952 serial cards currently fails after entering
postcar, since the state of oxpcie_present is not maintained
from previous stage.
As a quick work-around test the expected UART register space
to see if anyone decodes the address.
Change-Id: I5601034be6e413616fb3433c894fb008a3e02138
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74597
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
coreboot logs the error below, since the value of hporch is too small. Increasing hbl from 80 to 174, and hso from 40 to 72 to revise the HBP(Horizontal Back Porch) and HFP(Horizontal Front Porch). After revising this, the actual measurement frame rate is 60.1Hz.
[ERROR]HFP plus HBP is not greater than d_phy, the panel may not work
properly.
BUG=b:284812193
TEST=cbmem -c | grep "ERROR" and measure frame rate
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I7de5984ce8aec12d8ebe292974e05776835330d6
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76218
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I40b8482f41e8fece55fd60fec7ec3f63f83bd030
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76280
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Reserving resources needs to have inclusive region ends.
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: I88a09d205ef9699de7f18e0a2f33c9ad3ce9fa36
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76279
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove BUILD_TIME_STAMP_SIZE macro from coreboot because FSP 3223
version have BUILD_TIME_STAMP_SIZE macro defined as part of
`FspProducerDataHeader.h`.
Ref change:
9c28ab1d1a vc/intel/fsp/mtl: Update header files from 3194_81 to 3223.80
BUG=b:285110116
TEST=Able to build google/rex.
Change-Id: I52707adf1aa6dadca8dcf82102f76916a0cfe346
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76341
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
tis_plat_irq_status() function is used only by Google TPM. It should
be moved to drivers/tpm/cr50.c. The name of the function was changed
to cr50_plat_irq_status().
BUG=b:277787305
TEST=Build all affected platforms
Change-Id: I78dc39f2c7b44232b06947d3dfe6afa52807ced8
Signed-off-by: Grzegorz Bernacki <bernacki@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75917
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Always send the Exit 4-Byte Address Mode (E9h) command before the first
access to the SPI flash in all stages when the SPI flash is
memory-mapped. This is useful for x86 mainboards that do not access SPI
flash in bootblock yet still need to exit 4-byte addressing mode in
romstage or ramstage.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I3a62bfa44a0a5645c1bb80b32d0b9f92075c66bf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Commit d054bbd4f1ba ("Makefile.inc: fix multiple jobs build issue")
added a dependency on $(obj)/fmap_config.h to all .c source files in all
stages, so it's not needed any more to add it as a dependency to files
that include fmap_config.h.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7b62917f32ae9f51f079b243a606e5db07ca9099
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76002
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The prefix POSTCODE makes it clear that the macro is a post code.
Hence, replace related macros starting with POST to POSTCODE and
also replace every instance the macros are invoked with the new
name.
The files was changed by running the following bash script from the
top level directory.
sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \
src/commonlib/include/commonlib/console/post_codes.h;
myArray=`grep -e "^#define POSTCODE_" \
src/commonlib/include/commonlib/console/post_codes.h | \
grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`;
for str in ${myArray[@]}; do
splitstr=`echo $str | cut -d '_' -f2-`
grep -r POST_$splitstr src | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
grep -r "POST_$splitstr" util/cbfstool | \
cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g";
done
Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8
Signed-off-by: lilacious <yuchenhe126@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch introduces CBMEM ID to store the MRC version (similar to
existing implementation that stores the FSP-M version inside CBMEM ID)
inside cbmem so the version information is available across the
different coreboot stages. For example:
* romstage: Use the CBMEM ID version information to check if the MRC
cache is valid and need to erase the MRC cache
* ramstage: Use the CBMEM ID to store the MRC cache into the
non-volatile space.
BUG=b:261689642
TEST=Able to build and boot google/rex and dump the MRC version as
below.
cbmem --list
CBMEM table of contents:
NAME ID START LENGTH
...
21. MRC VERSION 5f43524d 75ffeb60 00000004
...
localhost ~ # cbmem -r 5f43524d | hexdump
00000000 01 12 07 00
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I91f735239b33c6f8ba41c076048903e4b213c6a2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75921
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch uses the "generic" variable name as "version" while storing
the MRC cache data instead referring to the FSP-M version or MRC
version. Hence, updated all the instances of `fsp_version/fspm_version`
with `version`.
Also introduces the new option to the MRC cache
version that allows SoC users to store the MRC cache version based on
the supported EDK2 version. Intel FSP built with EDK2 version 202302
onwards has support to retrieve the MRC version by directly parsing
the binary.
Additionally, added the helper function `fsp_mrc_version()` and
corresponding header file to read the MRC version from the FSP binary.
BUG=b:261689642
TEST=Able to build and boot google/rex and google/omnigul.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia8af53aed674ad4a3b426264706264df91d9c6b0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75920
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
FSP performance timestamp is in nano second by default. This patch is to
correct unit in FSP performance timestamp data print and macro name to
avoid confusion.
Change-Id: I4aec4f63beddbd7ce6e8e3fc1b53a45da2ee0b00
Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75816
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
In commit e59f18bf29a8 ("drivers/i2c: Add PI7C9X2G608GP PCIe switch
driver (pi608gp)"), there were some suggestions after it's been already
merged.
This patch addresses the points regarding the code style and comments.
BUG=none
TEST=Build OK, no behavioral changes in the pi608gp driver, console logs
without changes.
Change-Id: I5fc54708e0085fea4bd1f2fbf2afb400d2ccbd46
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75806
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
In commit e59f18bf29a8 ("drivers/i2c: Add PI7C9X2G608GP PCIe switch
driver (pi608gp)"), there were some suggestions after it's been already
merged.
This patch addresses the points regarding the number types - fix of the
printk format strings, inclusion of 'stdint.h' and marking the set of
allowed values as constant.
BUG=none
TEST=Build OK, no behavioral changes in the pi608gp driver, console logs
without changes.
Change-Id: I34c664f6a8a257b260facdbf9043825ff4a4c932
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75500
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This patch renames `SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION` config
to `SOC_INTEL_STORE_ISH_FW_VERSION` to ensure the usage of this config
is clear.
Any platform would like to fetch the currently running ISH firmware
version should select this configuration.
TEST=Able to build and boot google/marasov.
Change-Id: Ie503d6a5bf5bd0d3d561355b592e75b22c910bf5
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75767
Reviewed-by: Kangheui Won <khwon@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This fixes format string vulnerability issues with snprintf statement
found by klocwork scan.
Foundby=klocwork
BUG=NONE
TEST=Boot to OS on Meteor Lake rex platform and run klocwork scan.
Check related ACPI tables and modem driver behavior after changes.
Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com>
Change-Id: Ia6b7d70c0b2b86d0918e58348dccd206a7ee9193
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75733
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Cliff Huang <cliff.huang@intel.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Instead of adding the new PCI IDs of the XHCI controllers in every new
chip generation to the pci_xhci driver, bind the driver to the internal
PCI devices of the XHCI controllers via the device ops statement in the
chipset devicetree. The PCI device function of the XHCI2 controller in
Mendocino can be either a dummy device or the XHCI controller, so the
device ops are attached to that device in the mainboard devicetree
instead. The Glinda code is right now just a copy of the Mendocino code,
so it'll change in the future, but for consistency the equivalent
changes to those in Mendocino are applied there too.
Since the device ops are now attached to the devices via the static
devicetree entry, also remove both the xhci_pci_driver struct and the
amd_pci_device_ids array from drivers/usb/pci_xhci/pci_xhci.c.
TEST=SSDT entries for the XHCI controllers are still generated on
Mandolin.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9c455002c6d2aac576fe24eee0c31744b4507bb0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75713
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Hook up xhci ops for Phoenix xHCI device. Benefit is we don't have to
bother by adding xhci DID.
BUG=b:285981912
TEST=check coreboot log shows below.
[INFO ] \_SB.PCI0.GP41.XHC0.RHUB.SS01: USB3 Type-A Port A0 (MLB)
Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Change-Id: Ib59874948725966b04b54def3f6de463afeda709
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75659
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
BUG=b:285110121
TEST=boot Myst and verify the flash is recognized
Change-Id: I30aed5299f87f7cf02fe9a5569edd2b8dcf7b452
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75587
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Print the flash ID codes when find_match fails to match the flash.
BUG=b:285110121
Change-Id: I2106abfcfbd44c7d56d48ffbb43d8c76089af076
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75586
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jon Murphy <jpmurphy@google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Add a new Kconfig LINUXPAYLOAD_CMDLINE_VPD_OVERWRITE that can overwrite
Linux payload's kernel command line from VPD. Currently only overwrite
Linux kernel command line 'loglevel' via VPD key 'kernel_log_level'.
TESTED=On OCP Delta Lake, with kernel_log_level set to 0, warm reboot
time can see about 10 seconds improvement comparing to kernel log level
7.
Change-Id: Idf06c7ab9958c940fc3b23d560bb9dade991a6da
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75510
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Change-Id: Ib8ee07aefdb32b8efe719f484e242b6129596842
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75355
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
"extern" is automatically implied with function declaration.
Change-Id: Ic40218acab5a009621b6882faacfcac800aaf0b9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71890
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
The CS42L42 low power audio codec can be connected over SoundWire and
be configured for mainboards to use:
- Data Port 0 and Bulk Register Access
- Data Port 1 is the 64bit data output for the headset
- Data Port 2 is the 64bit data input for the headset
- Data Port 3 is the 64bit data input for the headset
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 0 and has strap
settings configuring it for unique ID 0.
chip drivers/soundwire/cs42l42
register "desc" = ""Headset Codec""
device generic 0.0 on end
end
This driver was tested with the rex0 reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW00)
{
Name (_ADR, 0x00001001FA424200) // _ADR: Address
Name (_DDN, "Headset Codec") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioInt (Edge, ActiveBoth, Exclusive, PullDefault, 0x0000,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0166
}
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x0167
}
})
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "irq-gpios",
Package () { \_SB.PCI0.HDAS.SNDW.SW00, Zero, Zero, Zero }
},
Package () { "reset-gpios",
Package () { \_SB.PCI0.HDAS.SNDW.SW00, One, Zero, Zero }
},
Package () { "cirrus,ts-inv", One },
Package () { "cirrus,ts-dbnc-rise", 0x05 },
Package () { "cirrus,ts-dbnc-fall", Zero },
Package () { "cirrus,btn-det-init-dbnce", 0x64 },
Package () { "cirrus,btn-det-event-dbnce", 0x0A },
Package () { "cirrus,bias-lvls",
Package () { 0x0F, 0x08, 0x04, One }
},
Package () { "cirrus,hs-bias-ramp-rate", 0x02 },
Package () { "cirrus,hs-bias-sense-disable", One },
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
Package () { "mipi-sdw-source-port-list", 0x02 },
Package () { "mipi-sdw-sink-port-list", 0x0C }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" },
Package () { "mipi-sdw-dp-0-subproperties", "DP0" },
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-source-subproperties", "SRC1" },
Package () { "mipi-sdw-dp-2-sink-subproperties", "SNK2" },
Package () { "mipi-sdw-dp-3-sink-subproperties", "SNK3"}
}
})
Name (BRA0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-bra-mode-bus-frequency-configs",
Package () { 0x00AC4400, ... }
},
Package () { "mipi-sdw-bra-mode-max-data-per-frame", 0x1000 },
Package () { "mipi-sdw-bra-mode-min-us-between-transactions", Zero }
}
})
Name (DP0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-port-max-wordlength", 0x40 },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-bra-mode-0", "BRA0" }
}
})
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00AC4400, ... }
},
Package () { "mipi-sdw-audio-mode-max-sampling-frequency", 0x0002EE00 },
Package () { "mipi-sdw-audio-mode-min-sampling-frequency", 0x1F40 },
[...]
}
})
Name (SRC1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
Name (SNK2, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
Name (SNK3, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
}
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ic7cfe2a21c76ba01ad3dea2a5017b28743aeb9f1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73279
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The MAX98363 smart speaker amp can be connected over SoundWire and be
configured for mainboards to use:
- Data Port 0 and Bulk Register Access is not supported
- Data Port 1 is the 32bit data input for the speaker path
The data port and audio mode properties are filled out as best as
possible with the datasheet as a reference.
The ACPI address for the codec is calculated with the information in
the codec driver combined with the devicetree.cb hierarchy where the
link and unique IDs are extracted from the device path.
For example this device is connected to master link ID 2 and has strap
settings configuring it for unique ID 0.
chip drivers/soundwire/max98363
register "desc" = ""Left Speaker Amp""
device generic 2.0 on end
end
This driver was tested with the rex0 reference design by booting
and disassembling the runtime SSDT to ensure that the devices have the
expected address and properties.
Device (SW20)
{
Name (_ADR, 0x000230019F836300) // _ADR: Address
Name (_DDN, "Left Speaker Amp") // _DDN: DOS Device Name
Method (_STA, 0, NotSerialized) // _STA: Status
{
Return (0x0F)
}
Name (_DSD, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-sw-interface-revision", 0x00010000 },
[...]
Package () { "mipi-sdw-source-port-list", Zero },
Package () { "mipi-sdw-sink-port-list", 0x02 }
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" },
Package () { "mipi-sdw-dp-1-sink-subproperties", "SNK1" }
}
})
Name (MOD0, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-audio-mode-bus-frequency-configs",
Package () { 0x00927C00, ... }
},
Package () { "mipi-sdw-audio-mode-sampling-frequency-configs",
Package () { 0x3E80, ... }
},
[...]
}
})
Name (SNK1, Package ()
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
{
Package () { "mipi-sdw-data-port-type", Zero },
[...]
},
ToUUID ("dbb8e3e6-5886-4ba6-8795-1319f52a966b"),
Package ()
{
Package () { "mipi-sdw-port-audio-mode-0", "MOD0" }
}
})
}
BUG=b:269497731
TEST=Verified SSDT for SNDW in the OS
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ie56109d615759e3e5e32782c8782cb2f47014ec4
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73278
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If Fastboot is enabled, the next boot will skip MRC and won't be able
to detect MRC error via EWL and still continues booting. Enforce FSP
MRC training in the next boot.
Change-Id: I9dee0472f8e2602cecf88c6d00dec0bf02b9f7bd
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69148
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add sending Meta's BMC SEL for memory training error occurred in EWL
type 3 error.
The detail definition of EWL (Enhanced Warning Log) can be found in the
specification document -- BIOS Data ACPI Table (BDAT) Interface
Specification v4.0 Draft 5:
https://uefi.org/sites/default/files/resources/BDAT%20Specification%20v4.0%20Draft5_0.pdf
Change-Id: I664e9d3da7910b47260881c0df64159c8dbe2dca
Signed-off-by: Shelly Chang <Shelly_Chang@wiwynn.com>
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69147
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The Bochs graphics adapter remaps the legacy VGA ioports
(0x3c0 -> 0x3df) to its MMIO region at offsets 0400 - 041f.
Currently bochs_vga_write() calculates a wrong offset when
accessing these ioports, which causes the boot splash image
not displayed when using the legacy-free pci variant of the
Bochs graphics adapter.
TEST=Build coreboot for QEMU x86 i440fx with a boot splash image
included, boot coreboot.rom with QEMU with '-device secondary-vga'
and verify the boot splash image is correctly displayed.
Fixes: efaf1b32ba1e ("drivers/emulation/qemu/bochs: Rewrite driver")
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Change-Id: I4acc71e3d6ef5161ab62e6714c94b7643c4c0972
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75146
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Some devices using the MAX98373a smart amp have the speakers connected
to port SSP2 vs the default SSP1, so add a configuration item to be
able to specify that.
TEST=tested with rest of patch train
Change-Id: I11d8011c54946aa72a83c73fa88456b4bb5d7d95
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75231
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also correct switch intendation, remove excess empty lines.
Change-Id: I86026e7f6c0c1c7f3dc6a473bb3afe2f6d32a247
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75230
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Will allow boards using this speaker configuration to correctly specify
their output type.
TEST=tested with rest of patch train
Change-Id: Iefcfc928e2611f533af1a2962ec2761ec1b7bf3a
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75210
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add _STA field entry for r8168 ACPI device and set to
ACPI_STATUS_DEVICE_HIDDEN_ON in order to hide device from
OS (Windows) as there is no driver needed (or available).
Windows correctly attaches drivers to the PCIe device, the
separate ACPI device is unused and unneeded.
Linux is unaffected as it does not use the ACPI device status.
Change-Id: Ib7ae99fffcb00e71421b93c2794119841aa239d3
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75177
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1. Restore the reverted 'commit 059902882ce5 ("drivers/ocp/ewl: Add EWL
driver for EWL type 3 error handling")'.
2. Print more EWL type 3 error information when it occurs.
Change-Id: Ib83b7653a839d18a065b929127549acd10bce7a7
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69280
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jon.zhixiong.zhang@gmail.com>
|
|
Adds the option to set the 'DmaProperty' in the device's _DSD.
This can be done by setting "add_acpi_dma_property"="true". If not set
(or set to false), the device descriptor generation behavior will remain
unchanged. The naming convention for the config option was chosen to
match that of other drivers.
This partially reverts commit 5609f7a684c6 ("drivers/pcie/generic: Clean
up driver") as the driver is now used on a couple mainboards which need
the DmaProperty.
Change-Id: I996fe4923948d13a20bf8b6b1a93dab0866d0fd4
Signed-off-by: Mark Hasemeyer <markhas@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/75094
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Add STA_ILI9882T panel serializable data to CBFS.
The panel datasheet: ILI9882T_Datasheet_20220428.pdf
BUG=b:275470328
BRANCH=corsola
TEST=build and check the CBFS include the panel
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: Ia7a37c0659f0959fe7be01aba0f08d63119d139f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74871
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
|
|
Configure the CMOS bank I/O base addresses with
PC_CMOS_BASE_PORT_BANK* rather than hard-coding as 0x70, 0x72. The
defaults remain the same.
Change-Id: Ie44e5f5191c66f44e2df8ea0ff58a860be88bfcf
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74903
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
CMOS defaults greater than 128 bytes long will extend to bank 1.
Change-Id: I9ee8364d01dd8520be101de3f83d2302d50c7283
Signed-off-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74902
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Add STA_HIMAX83102_J02 panel serializable data to CBFS.
The panel datasheet: HX83102-J02_Datasheet_v03.pdf.
BUG=b:272425116
BRANCH=corsola
TEST=build and check the CBFS include the panel
Signed-off-by: Ruihai Zhou <zhouruihai@huaqin.corp-partner.google.com>
Change-Id: I382bdc89e5a217fd1c28e677938f454dc09725cc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: cong yang <yangcong5@huaqin.corp-partner.google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Add _PLD support to GFX device so that each display output can store
its physical location of connection point. This is to be used primarily
for describing DP on USB-C ports in the future patches.
The upstream Linux kernel now has a feature to compare _PLD of Type C
connectors and DP connectors to link them together.
https://cgit.freedesktop.org/drm/drm-misc/commit/?id=c5c51b2420625faa1f0e363f21dba1de53806ff7
This feature allows us to tell which display output is used by which
USB-C port.
So, for the future boards, we want to add _PLD for each DP connector
matching with the corresponding USB-C port.
BUG=b:277629750
TEST=emerge-${BOARD} coreboot
Signed-off-by: Won Chung <wonchung@google.com>
Change-Id: I393207746a9e82c1fd7622ab3661d7b1232cb62f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74365
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
This patch adds some of the variety of configuration options exported
by the Pericom Inc. PI7C9X2G608GP PCIe switch over its SMBus interface.
Currently implemented options are only used to adjust the switch
upstream port amplitude and de-emphasis levels in millivolts. Only
values specified in the switch datasheet (in tables 6-6 and 6-8) are
allowed.
Example of a devicetree.cb entry:
chip drivers/i2c/pi608gp
register "gen2_3p5_enable" = "true"
register "gen2_3p5_amp" = "AMP_LVL_MV(425)"
register "gen2_3p5_deemph" = \
"DEEMPH_LVL_MV(37, 5)"
device i2c 0x6f on
ops pi608gp_ops
end
end
Link to the datasheet:
https://web.archive.org/web/20210225074853/https://www.diodes.com/assets/Datasheets/PI7C9X2G608GP.pdf
BUG=none
TEST=Create devicetree.cb and Kconfig entries for this driver
in a mainboard containing the switch and verify, that the values read
out from the switch config space match the values programmed over the
SMBus.
Change-Id: Id191c4e97b99da58efd3ba38bf8cca3603ece4d5
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
DSM (Dynamic Speaker Management) uses calibration parameters stored in
a VPD (Vital Product Data) FMAP region to configure the audio output
via an ACPI _DSD table. This has no dependency on a ChromeOS, and can
be used by Linux/Windows drivers if appropriately configured.
Remove the dependency of DSM_CALIB (and the calibration file) on
CHROMEOS and replace it with VPD, so that non-CHROMEOS builds
can utilize this feature as well. Move files from underneath
vc/google/chromeos to underscore the point.
TEST=build/boot google/nightfury, dump ACPI, verify DSM calibraton
parameters present in _DSD table.
Change-Id: I643b3581bcc662befc9e30736dae806f94b055af
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74812
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
Only expand these strings in lib/identity.o.
Change-Id: I8732bbeff8cf8a757bf32fdb615b1d0f97584585
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add a new chip driver for boards which use SOF (Sound Open Firmware)
OS drivers, which will be attached to the HDAS device and generate
entries in an ACPI _DSD table for the OS driver to use. This will allow
the OS drivers to easily determine the correct topology for the speaker
and jack amplifiers and correct microphone configuration.
TEST=tested with rest of patch train
Change-Id: Ie0431b2002287f35245cbf959828e931d7f375b2
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74813
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This patch calls into fsp_get_pch_reset_status() to get the
MultiPhaseSiInit API return status if
FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN is enabled.
Ideally FSP API should be able to return the status (both success and
error code) upon exiting the FSP API but unfortunately there are some
scenarios in ADL/RPL FSP where MultiPhaseSiInit API is unable to return
any ERROR status. Hence, this function can be considered as an
additional hook to read the FSP reset status by reading the dedicated
HOB without relying on the FSP API exit status code.
Any SoC platform that selects the FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN
config will call into this newly added API to get the FSP return status
from MultiPhaseSiInit.
BUG=b:278665768
TEST=Able to select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN for ADL/RPL SoC
code and call into this API to know the return status from
MultiPhaseSiInit FSP API.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I749c9986e17e4cbab333b29425c9a4a4ba4128fa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74784
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Himanshu Sahdev <himanshu.sahdev@intel.com>
|
|
This patch creates a function to read the FSP API Reset Status. This
function relies on the FSP Scheduled Reset HOB which holds the reset
type (warm/cold/shutdown) information along with any platform specific
reset need (like global reset).
Ideally FSP API should be able to return the status (both success and
error code) upon exiting the FSP API but unfortunately there are some
scenarios in ADL/RPL FSP where MultiPhaseSiInit API is unable to return
any ERROR status. Hence, this function provides an additional hook to
read the FSP reset status by reading the dedicated HOB without relying
on the FSP API exit status code.
Additionally, create FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN config option
to handle broken FSP API return status issue.
Any SoC platform that selects the `FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN`
config will call into this newly added API to get the FSP return status
from MultiPhaseSiInit.
BUG=b:278665768
TEST=Able to select FSP_MULTIPHASE_SI_INIT_RETURN_BROKEN for ADL/RPL SoC
code and call into this API to know the return status from
MultiPhaseSiInit FSP API.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ief5d79736cc11a0a31ca2889128285795f8b5aae
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74783
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Some of the chip.h files in the tree are missing the include guards.
This patch adds them in order to avoid potential redefinions of symbols
contained in these headers, when they are included multiple times in
static.c generated by sconfig.
Change-Id: I550a514e72a8dd4db602e7ceffccd81aa36446e3
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
VGA defined the extended ASCII set based on CP437, but the function
vga_write_text() accepts a signed char array.
This will cause unnecessary confusion that if we want to print u with
umlaut (code=129 in CP437), we need to explicitly cast it to -127 in
signed char.
Since we still want to leverage the built-in string utilities
which only accepts const char*, we still need to cast it to signed char
while processing, and cast it back to unsigned once we write into the
frame buffer.
BRANCH=brya
BUG=b:264666392
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Hsuan Ting Chen <roccochen@chromium.org>
Change-Id: If555bbc05f40ce3f02339c0468afff6dda8b7ded
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73099
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
TEST=fsp_print_guid() output doesn't get cobbled with other serial
output and now separated by a newline character.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I8d47dbc5d493f86f14a1bbcf9cb5c16c0e12b841
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74781
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch creates .final hook to call into get ISH version function
if platform has required config
(`SOC_INTEL_STORE_CSE_FPT_PARTITION_VERSION`) support.
BUG=b:273661726
TEST=The ISHC version, 5.4.2.7779, was retrieved on the google/nivviks.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: Ib3f983d5de5b169474bcdb1e9e2934174a9dadf8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74209
Reviewed-by: Kangheui Won <khwon@chromium.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To use generated build.h one should have had a pre-requisite
in the Makefile. Reference coreboot_version from lib/version.c
instead.
Change-Id: I7f10acabf1838deb90fde8215a32718028096852
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74446
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For security reasons, removing the efivars implementation of the option
API was considered. However, this use-case is not the "None"
option-backend (CONFIG_OPTION_BACKEND_NONE), so the SMM phase also does
not use the no-op in option.h. This causes linker errors when the
option API is called.
For example, src/soc/intel/common/block/pmc/pmclib.c and
src/console/init.c use `get_uint_option`.
Minimising code in SMM can be implemented as a follow-up.
Change-Id: Ief3b52965d8fde141c12266a716f254dd45559d5
Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73905
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This reverts commit 4dba71fd25c91a9e610287c61238a8fe24452e4e.
Add multiple fan support for dptf policies.
This also fixes the Google Meet resolution drop issue as per
b:246535768 comment#12. When system starts Google Meet video call,
it uses the hardware accelerated encoder as expected. But, as soon as
another system connects to the call, an immediate fallback is observed
from hardware to software encoder. Due to this, Google Meet resolution
dropped from 720p to 180p. This issue is observed on Alder Lake-N SoC
based fanless platforms. This same issue was not seen on fan based
systems. With the fix in dptf driver where fan configures appropriate
setting for only fan participant, not for other device participants,
able to see consistent 720p resolution.
BUG=b:246535768,b:235254828
BRANCH=None
TEST=Built and tested on Alder Lake-P Redrix system for two fans
support and on Alder Lake-N fanless systems. With this code change
Google Meet resolution drop not observed.
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: Id07d279ff962253c22be9d395ed7be0d732aeaa7
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73249
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now the CPU topology is filled in struct device during mp_init.
Change-Id: I7322b43f5b95dda5fbe81e7427f5269c9d6f8755
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69223
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
The RTD3 driver should have its 'use_rp_mutex' set in the devicetree.
BRANCH=firmware-brya-14505.B
TEST=boot to OS and check the generated SSDT table for the WWAN
The RTD3 RPMX mutex should be used in the reset Methods
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ic3fe20c56b67c2b5177f55f4845610087a30dc7f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73381
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
|
|
Use the newly introduced 'all_x86' make target to add the compilation
unit to all stages that run on the x86 cores, but not to verstage on
PSP.
TEST=Timeless build for Mandolin results in identical image.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I23c6977ae8acebb8dcd546f86f7f7b677272a6cb
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74153
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use the introduced EFI variable store driver on top of the SMMSTORE
region in SPI flash to read/write options.
Change-Id: I520eca96bcd573f825ed35a29bf8f750e313a02d
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62562
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a driver to read and write EFI variables stored in a region device.
This is particularly useful for EDK2 as payload and allows to reuse
existing EFI tools to set/get options used by the firmware.
The write implementation is fault tolerant and doesn't corrupt the
variable store. A faulting write might result in using the old value
even though a 'newer' had been completely written.
Implemented basic unit tests for header corruption, writing existing
data and append new data into the store.
Initial firmware region state:
Initially the variable store region isn't formatted. Usually this is
done in the EDK2 payload when no valid firmware volume could be found.
It might be useful to do this offline or in coreboot to have a working
option store on the first boot or when it was corrupted.
Performance improvements:
Right now the code always checks if the firmware volume header is valid.
This could be optimised by caching the test result in heap. For write
operations it would be good to cache the end of the variable store in
the heap as well, instead of walking the whole store. For read
operations caching the entire store could be considered.
Reclaiming memory:
The EFI variable store is append write only. To update an existing
variable, first a new is written to the end of the store and then the
previous is marked invalid. This only works on PNOR flash that allow to
clear set bits, but keep cleared bits state.
This mechanisms allows a fault tolerant write, but it also requires to
"clean" the variable store for time to time. This cleaning would remove
variables that have been marked "deleted".
Such cleaning mechanism in turn must be fault tolerant and thus must use
a second partition in the SPI flash as backup/working region.
For now to cleaning is done in coreboot.
Fault checking:
The driver should check if a previous write was successful and if not
mark variables as deleted on the next operation.
Tested and working:
- Enumerate all existing variables
- Read variables
- Write variables
Change-Id: I8079f71d29da5dc2db956fc68bef1486fe3906bb
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52564
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use enum cb_err as return value of fsp_find_range_hob instead of using
the raw -1 and 0 values. Also update the call sites accordingly.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id6c9f69a886f53868f1ef543c8fa04be95381f53
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74082
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The API finds the FSP resource HOB for the given GUID.
Returns the pointer to the HOB if found, otherwise NULL
Change-Id: I4ebc9b7d214e5fc731ae45f28e7f5732a7635cbc
Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72721
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Change preprocessor #if to a regular if and let the compiler optimize
away the unused branch.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I7af747812a448064ac6b38686b8bd616a755932e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73970
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Add Kconfig option to force 4-byte addressing mode.
Some platforms require the flash to stay in 4-byte addressing mode where
it expects 4-byte addresses on regular commands.
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I2e41da2a78285c23c1c1d97eaf3969749812327b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/73860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
