summaryrefslogtreecommitdiff
path: root/src/cpu
AgeCommit message (Collapse)Author
2012-07-02remove CONFIG_SERIAL_CPU_INITSven Schnelle
The new broadcast code doesn't support serial init - if a CPU needs serial init, this should be handled in the model specific CPU init code. Change-Id: I7cafb0af10d712366819ad0849f9b93558e9d46a Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1140 Tested-by: build bot (Jenkins)
2012-07-02Use broadcast SIPI to startup siblingsSven Schnelle
The current code for initializing AP cpus has several shortcomings: - it assumes APIC IDs are sequential - it uses only the BSP for determining the AP count, which is bad if there's more than one physical CPU, and CPUs are of different type Note that the new code call cpu->ops->init() in parallel, and therefore some CPU code needs to be changed to address that. One example are old Intel HT enabled CPUs which can't do microcode update in parallel. Change-Id: Ic48a1ebab6a7c52aa76765f497268af09fa38c25 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1139 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-07-02Intel CPUs: execute microcode update only once per coreKyösti Mälkki
Early HT-enabled CPUs do not serialize microcode updates within a core. Solve this by running microcode updates on the thread with the smallest lapic ID of a core only. Also set MTRRs once per core only. Change-Id: I6a3cc9ecec2d8e0caed29605a9b19ec35a817620 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/1142 Tested-by: build bot (Jenkins) Reviewed-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-06-19Enable Intel PECI on Model 6fx CPUsSven Schnelle
Those CPUs support the PECI (Platform Environment Control Interface), so enable it. This interface is commonly used for tasks like fan control. Change-Id: Id2dadc4821de8cc0b579e77235aa36892e57fd02 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1104 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-06-12udelay: add missing bus frequencySven Schnelle
commit 5b6404e4195157eac8d97ae5bf30f45612109d57 ("Fix timer frequency detection on Sandybridge") reworked the udelay code, but didn't add the 333MHz FSB entry used on Model 15 Xeons. Change-Id: Ie34f9ae3703b64672625e7bf1b943654a7a5eaa6 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/1099 Tested-by: build bot (Jenkins)
2012-05-30Fix the location of "Setting variable MTRR" printk.Denis 'GNUtoo' Carikli
Without that fix the debugging is harder because the person debugging coreboot will see the following twice(note the repeated MTRR number): Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB [...] Setting variable MTRR 1, base: 4096MB, range: 512MB, type WB Setting variable MTRR 1, base: 4608MB, range: 256MB, type WB Setting variable MTRR 1, base: 3072MB, range: 1024MB, type UC instead of the following twice: Setting variable MTRR 0, base: 0MB, range: 4096MB, type WB [...] Setting variable MTRR 1, base: 3072MB, range: 1024MB, type UC Thanks to kmalkki on #coreboot's Freenode IRC channel for the idea: May 25 23:57:17 <kmalkki> I would add (move) that "Setting variable MTRR..." debug at the end of set_var_mtrrs() Change-Id: I9f4b7110ba34d017a58d8cc5fb06a7b1c3d0c8aa Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/1058 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-05-29Drop config variable CPU_MODEL_INDEXStefan Reinauer
It's only used in the ACPI generator for Sandybridge/Ivybridge CPUs and the code can easily be changed to not rely on any Kconfig magic. Change-Id: Ie2f92edfe8908f7eb2fda3088f77ad22f491ddcf Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/1047 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-08Some more #if cleanupPatrick Georgi
Replace #elif (CONFIG_FOO==1) with #elif CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]1),\1\2,g" {} + (manual tweak since it hit a false positive) Replace #elif (CONFIG_FOO==0) with #elif !CONFIG_FOO find src -type f -exec sed -i "s,\(#.*\)(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]0),\1\!\2,g" {} + Change-Id: I8f4ebf609740dfc53e79d5f1e60f9446364bb07d Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1006 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-05-08Clean up #ifsPatrick Georgi
Replace #if CONFIG_FOO==1 with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1[[:space:]]*\$,#if \1," {} + Replace #if (CONFIG_FOO==1) with #if CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*1)[[:space:]]*\$,#if \1," {} + Replace #if CONFIG_FOO==0 with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0[[:space:]]*\$,#if \!\1," {} + Replace #if (CONFIG_FOO==0) with #if !CONFIG_FOO: find src -name \*.[ch] -exec sed -i "s,#if[[:space:]]*(\(CONFIG_[A-Z0-9_]*\)[[:space:]]*==[[:space:]]*0)[[:space:]]*\$,#if \!\1," {} + (and some manual changes to fix false positives) Change-Id: Iac6ca7605a5f99885258cf1a9a2473a92de27c42 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/1004 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Martin Roth <martin@se-eng.com>
2012-05-03Fix register corruption during Intel Microcode updateStefan Reinauer
Another bug in the Intel microcode update code that existed since we switched to LinuxBIOSv2 in 2004: The inline assembly code that reads the CPU revision from an MSR after running cpuid(1) trashes registers EBX and ECX. Only ECX was mentioned in the clobber list. C code running after this function could silently access completely wrong data, which resulted in the wrong date being printed on microcode updates (and potentially other issues happening until the C code writes to EBX again) Change-Id: Ida733fa1747565ec9824d3a37d08b1a73cd8355f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/996 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-02Don't include console.h in microcode.c when compiling with ROMCCStefan Reinauer
If microcode.c is built by romcc, this indicates that we are running microcode updates in the bootblock (e.g. before enabling cache as ram). In this case we did not enable any consoles yet, so we don't output anything. This patch removes inclusion of the unnecessary console/console.h for that case, which was breaking with certain configurations. Change-Id: Iebb57794d7b1e84cac253d249d47b88de4dd28a3 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/988 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-05-01Drop CONFIG_MAX_PHYSICAL_CPUS on non-AMD boardsStefan Reinauer
CONFIG_MAX_PHYSICAL_CPUS is defined by quite a number of mainboards whithout any code actually using the variable. Hence, drop MAX_PHYSICAL_CPUS from Kconfig for those boards. In the long run we should drop CONFIG_MAX_PHYSICAL_CPUS use completely and make the code dynamic or depend on CONFIG_MAX_CPUS instead. Change-Id: I37dcc74d245ddba5186b96bd82220dacb6f4d323 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/984 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-05-01Move VSA support from x86 to GeodePatrick Georgi
Instead of the special case in the generic Makefile.inc, use cbfs-files in the CPU directories. Change-Id: I71d9c8dff906c9a516ac0dd09a315f8956075592 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/962 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-05-01Make geode_lx use the vsa from blobs repositoryPatrick Georgi
... or fail if repository is not enabled. Change-Id: I0a1e6d6fed852ec7edf96ace8346ae6b23838a56 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/959 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2012-04-30Fix up Sandybridge C state generation codeStefan Reinauer
This code fixes the sandybridge C state generation code to work with the current version of the ACPI code generator. Change-Id: I56ae1185dc0694c06976236523fdcbe5c1795b01 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/950 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-30Rework ACPI CST table generationStefan Reinauer
... in order to unify the Sandybridge and Lenovo implementations currently used in the tree. - use acpi_addr_t in acpigen_write_register() - use acpi_cstate_t for cstate tables (and fix up the x60 and t60) - drop cst_entry from acpigen.h Change-Id: Icb87418d44d355f607c4a67300107b40f40b3b3f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/943 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-27Move top level pc80 directory to drivers/Stefan Reinauer
There is no reason for this to be a top level directory. Some stuff from lib/ should also be moved to drivers/ Change-Id: I3c2d2e127f7215eadead029cfc7442c22b26814a Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/939 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-26microcode: print date of microcode and unify outputStefan Reinauer
Most subsystems print their name with a colon, and then the message. Do the same thing for the microcode update code. Also, each microcode update has a date header. Print the date from that header to make it easier to determine whether you're running the latest microcode. Change-Id: Ic22947c4b9f0502d4091d975e1f1ab42f70aa1aa Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/929 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-04-26Revamp Intel microcode update codeStefan Reinauer
- add GPLv2 + copyright header after talking to Ron - "bits" in struct microcode served no real purpose but getting its address taken. Hence drop it - use asm volatile instead of __asm__ volatile - drop superfluous wrmsr (that seems to be harmless but is still wrong) in read_microcode_rev - use u32 instead of unsigned int where appropriate - make code usable both in bootblock and in ramstage - drop ROMCC style print_debug statements - drop microcode update copy in Sandybridge bootblock Change-Id: Iec4d5c7bfac210194caf577e8d72446e6dfb4b86 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/928 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-25Replace cache control magic numbers with symbolsPatrick Georgi
Instead of opaque numbers like (1<<29), use symbols like CR0_NoWriteThrough. Change-Id: Id845e087fb472cfaf5f71beaf37fbf0d407880b5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/833 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-22amd: Fix unused variable warningVikram Narayanan
Comment out the id variable which is used in a commented code block. Change-Id: Ib002d57e5314971f0589d04b7e451ab7d7079f53 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/913 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-04-20Revert wbind added to the reset_vectorMarc Jones
This change reverts : Change Id I4fdb281b2b684ab5fea999aae28ca08dce24da4d The wbinvd (or invd) should not be needed at the reset vector. It causes problems with some CPUs AP init. If there is a problem with a specific CPU and it must be done at this location, it should be added conditionally. Change-Id: I85b71b0a07f039359a4fb889aaa05c75fff619be Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/908 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2012-04-16S3 code in coreboot public folder.zbao
1. Move the Stack to high memory. 2. Restore the MTRR before Coreboot jump to the wakeup vector. Change-Id: I9872e02fcd7eed98e7f630aa29ece810ac32d55a Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/623 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-04-12S3 code in vendorcode folder.zbao
Change the ExecuteFinalHltInstruction to assembly code. so we can make sure the code can run stackless. Change-Id: I783ced6cf7c5bc29c12a37aef29077e610d8957d Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/622 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-11Remove obsolete empy macro definitionRon Minnich
In the early days of v2 the (e.g.) #ifdef SMP style was frowned upon in some quarters. Hence, empty definitions of functions were created. This particular function, possibly the last remaining example, was no longer even being used anywhere. Signed-off-by: Ron Minnich <rminnich@gmail.com>
2012-04-06Fixes and Sandybridge support for lapic cpu initStefan Reinauer
- preprocessor macros should not use defined(CONFIG_*) but just CONFIG_* - drop AMD CPU model 14XXX config variable use. Those do not exist. - skip some delays on Sandybridge systems - Count how long we're waiting for each AP to stop - Skip speedstep specific CPU entries Change-Id: I13db384ba4e28acbe7f0f8c9cd169954b39f167d Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/871 Tested-by: build bot (Jenkins) Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2012-04-06Fix support for RAM-less multi-processor initKyösti Mälkki
Fix regression after commit: 7dfe32c5408916b6cb23f1ec48e473e1c728d300 Only align 16-bit entry on platforms that really require it, indicated by selecting SIPI_VECTOR_IN_ROM in CPU Kconfig. Disable assertion test of AP_SIPI_VECTOR for platforms not depending on this feature. Build of romstage should be fixed to get the vector address from bootblock build automatically. Change-Id: Ide470833c0254df1a9ff708369ab1c095ccfb98d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/875 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-06Add Sandybridge/Cougar Point support to SMM relocation handlerStefan Reinauer
Previously this part of smmrelocate.S had to be omitted because the CONFIG_ options for those components did not exist yet. Add them back. Change-Id: I6ac94ca804e03062724401a08d1d174adac5e830 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/874 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Tested-by: build bot (Jenkins)
2012-04-06Cache 8MB flash instead of 4MBStefan Reinauer
Also fix the MTRR check to use the total_mtrrs variable instead of a hardcoded 8. Change-Id: I2c5ceb3910cd949f43ecf5b8aff857d6ffe0b1a5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/873 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-05Fix timer frequency detection on SandybridgeStefan Reinauer
Change-Id: Ide720bd91cde56a0afdd231d93500c371b1ffbe8 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/870 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05Invalidate cache before first jumpStefan Reinauer
Some CPUs (Sandybridge) seem to require this, and it does not hurt on other CPUs. Change-Id: I4fdb281b2b684ab5fea999aae28ca08dce24da4d Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/869 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2012-04-05Update documentation in smmrelocate.S to mention TSEGStefan Reinauer
Change-Id: I392f5fc475b15b458fc015e176e45888e7de27fb Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/861 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-04-05Add support for Intel Sandybridge CPUStefan Reinauer
Change-Id: I9f37e291c00c0640c6600d8fdd6dcc13c3e5b8d5 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/855 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-04Add support to run SMM handler in TSEG instead of ASEGStefan Reinauer
Traditionally coreboot's SMM handler runs in ASEG (0xa0000), "behind" the graphics memory. This approach has two issues: - It limits the possible size of the SMM handler (and the number of CPUs supported in a system) - It's not considered a supported path anymore in newer CPUs. Change-Id: I9f2877e46873ab2ea8f1157ead4bc644a50be19e Signed-off-by: Duncan Laurie <dlaurie@google.com> Acked-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/842 Reviewed-by: Peter Stuge <peter@stuge.se> Tested-by: build bot (Jenkins)
2012-04-03Add support for Intel Turbo Boost featureStefan Reinauer
From wikipedia: Intel Turbo Boost is a technology implemented by Intel in certain versions of their Nehalem- and Sandy Bridge-based CPUs, including Core i5 and Core i7 that enables the processor to run above its base operating frequency via dynamic control of the CPU's "clock rate". It is activated when the operating system requests the highest performance state of the processor. Change-Id: I166ead7c219083006c2b05859eb18749c6fbe832 Signed-off-by: Duncan Laurie <dlaurie@google.com> Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/844 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02Apply cache-as-ram conditionally on socket mPGA604Kyösti Mälkki
The socket mPGA604 is for P4 Xeon which to my knowledge is always HT-enabled. I assume the existing usage of car/cache_as_ram.inc on socket_mPGA604, namely the Tyan S2735, as broken. Existing car/cache_as_ram.inc has invalid SIPI vector and it does not initialise AP CPU's to activate L2 cache. Other mPGA604 boards are not affected, as they have not been converted to CAR. Change-Id: I7320589695c7f6a695b313a8d0b01b6b1cafbb04 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/607 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-04-02S3 code whitespaces changes.zbao
some blank changing is integrated into the previous patches, which hold the unsplitted diff hunk. Change-Id: If9e5066927c5e27fee7ac8422dbfbf2cbeac7df5 Signed-off-by: Zheng Bao <zheng.bao@amd.com> Signed-off-by: zbao <fishbaozi@gmail.com> Reviewed-on: http://review.coreboot.org/625 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-03-31Whitespace fixesPatrick Georgi
Change-Id: I441326ecbda72ec7e99fc99bf40a81aa7e94ee26 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/834 Tested-by: build bot (Jenkins) Reviewed-by: Mathias Krause <minipli@googlemail.com>
2012-03-31Intel cpus: get MAXPHYADDR at runtime for new CARKyösti Mälkki
Use CPUID to get MAXPHYADDR and set MTRR masks correctly. Also only BSP CPU clears MTRRs and initializes its Local APIC. Change-Id: I89ee765a17ec7c041284ed402f21d9a969d699bd Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/686 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-31Intel cpus: add hyper-threading CPU support to new CARKyösti Mälkki
This improvement of CAR code starts the sibling CPU processors and clears their cache disable bits (CR0.CD) in case a hyper-threading CPU is detected. Change-Id: Ieabb86a7c47afb3e178cc75bb89dee3efe0c3d18 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/604 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: improve CPU compatibility of new CARKyösti Mälkki
Most or many Xeons have no MSR 0x11e. I have previously tested that a HT-enabled P4 (model f25) can execute this but will not have cache-as-ram enabled. Should work for non-HT P4. Change-Id: I28cbfa68858df45a69aa0d5b050cd829d070ad66 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/644 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Add support for RAM-less multi-processor initKyösti Mälkki
For a hyper-threading processor, enabling cache requires that both the BSP and AP CPU clear CR0.CD (Cache Disable) bit. For a Cache-As-Ram implementation, partial multi-processor initialisation precedes raminit and AP CPUs' 16bit entry must be run from ROM. The AP CPU can only start execute real-mode code at a 4kB aligned address below 1MB. The protected mode entry code for AP is identical with the BSP code, which is already located at the top of bootblock. This patch takes the simplest approach and aligns the bootblock 16 bit entry at highest possible 4kB boundary below 1MB. The symbol ap_sipi_vector is tested to match CONFIG_AP_SIPI_VECTOR used by the CAR code in romstage. Adress is not expected to ever change, but if it does, link will fail. Change-Id: I82e4edbf208c9ba863f51a64e50cd92871c528ef Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/454 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: apply some good programming practices in new CARKyösti Mälkki
Delete dead CAR code and whitespace fixes. Replace cryptic 32bit hex values with existing LAPIC definitions. Do not assume state of direction flag before "rep" instruction. Do not load immediate values on temporary registers when not needed. Parameter pushed on stack was not popped (or flushed) after returning from call. This is a sort-of memory leak if multiple call's are implemented the same way. Change-Id: Ibb93e889b3a0af87b89345c462e331881e78686a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/643 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-31Intel cpus: cache actual size of the Flash ROM deviceKyösti Mälkki
Cache was enabled for the last 4 MB below 4 GB when ramstage is loaded. This does not cover the case of a 8 MB Flash and could overlap with some system device placed at high memory. Use the actual device size for the cache region. Mainboard may override this with Kconfig CACHE_ROM_SIZE if necessary. Change-Id: I622223b1e2af0b3c1831f3570b74eacfde7189dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/641 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-31Intel cpus: copy model_6ex CAR codeKyösti Mälkki
Copy model_6ex CAR as car/cache_as_ram_ht.inc to be extended with hyper-threading CPU support. Change-Id: I09619363e714b1ebf813932b0b22123c1d89010e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/606 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-30Make MTRR min hole alignment 64MBDuncan Laurie
This affects the algorithm when determining when to transform a range into a larger range with a hole. It is needed when for when I switch on an 8MB TSEG and cause the memory maps to go crazy. Also add header defines for the SMRR. Change-Id: I1a06ccc28ef139cc79f655a8b19fd3533aca0401 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/765 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Fix MB calculation in the reporting of the MTRR holeDuncan Laurie
Change-Id: I34b5c4ffd2a3f3e895d2bffedce1c00ee9aea942 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/763 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30MTRR: add alternate allocation method for odd memory mapsDuncan Laurie
With >= 4GB memory installed we get a memory map split in the middle due to remap that has boundaries that are inconveniently aligned for MTRRs due to the various UMA regions. 0000MB-2780MB 2780MB RAM (writeback) 2780MB-2782MB 2MB TSEG (uncached/SMRR) 2782MB-2784MB 2MB GFX GTT (uncached) 2784MB-2816MB 32MB GFX UMA (uncached) 2816MB-4096MB 1280MB EMPTY (N/A) 4096MB-5368MB 1272MB RAM (writeback) 5368MB-5376MB 8MB ME UMA (uncached) The default MTRR allocation method of trying to cover everything with one MTRR and then carve out a single uncached region does not work for the GPU aperture which needs write-combining type, and it also has issues trying to cover the uneven boundaries in the avaiable variable MTRRs. My goal was to make a minimal set of changes and avoid modifying behavior on existing systems with an algorithm that is not always optimal for a typical memory layout. So the flag 'above4gb=2' will change these allocation behaviors: 1) Detect the number of available variable MTRRs rather than limiting to hardcoded value. We need every last MTRR. 2) Don't try to cover all RAM with one MTRR, instead let each RAM region get covered independently. 3) Don't assume uma_memory_base is part of the last region and increase the size of that region. In this case the UMA region is carved out from the lower memory region and it is already declared as part of the ram region. 4) If a memory region can't be covered with MTRRs >= 16MB then instead make a larger region and trim it with uncached MTRRs. Change-Id: I5a60a44ab6d3ae2f46ea6ffa9e3677aaad2485eb Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/761 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add Kconfig options to enable TSEG and set a sizeDuncan Laurie
Future CPUs will require TSEG use for SMM Change-Id: I1432569ece4371d6e12c997e90d66c175fa54c5c Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: http://review.coreboot.org/766 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30drop use of MAX_PHYSICAL_CPUS and MAX_CPUS where not neededStefan Reinauer
Change-Id: Idf875ddec417e627f1e72a6d834860e7fd324a50 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/760 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-30Add an option to keep the ROM cached after romstageStefan Reinauer
Change-Id: I05f1cbd33f0cb7d80ec90c636d1607774b4a74ef Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/739 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-03-25Fix possible deadlock on SMP stop_this_cpuKyösti Mälkki
Do not use printk on the running thread after it has been sent the INIT IPI, execution may halt with console spinlock held. Change-Id: I64608935ea740fb827fa0307442f3fb102de7a08 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/776 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-25Intel cpus: Fix deadlock on hyper-threading initKyösti Mälkki
Only the BSP CPU was able to start its hyper-threading CPU siblings. When an AP CPU attempts this it calls start_cpu() within start_cpu(), deadlocking the system with start_cpu_lock. At the time intel_sibling_init() is run, the BSP CPU is still walking the cpu_bus linked list in lapic_cpu_init: start_other_cpus(). A sibling CPU appended at the end of this list will get started. Also fail compile with #error if SERIAL_CPU_INIT==0, as microcode updates on hyper-threading sibling CPUs must be serialized. Tested with HT-enabled P4 Xeons on dual-socket604 platform. Change-Id: I0053f58f49ed604605ce0a55e826d3e1afdc90b6 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/775 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz>
2012-03-17Intel cpus: Include CAR from socketKyösti Mälkki
It was not obvious which CAR was compiled in. Also build would fail if a socket included two models with both having an include for CAR. Change-Id: I000c2e24807c3d99347a43d120333c13fbf91af4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/626 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Rename AMD_AGESA to CPU_AMD_AGESAKyösti Mälkki
Also any CPU_AMD_AGESA_FAMILYxx selects CPU_AMD_AGESA, so remove the explicit selects from the mainboards. Change-Id: I4d71726bccd446b0f4db4e26448b5c91e406a641 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/792 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16Fix AMD Agesa leaking KconfigKyösti Mälkki
Kconfig leaked XIP_ROM_SIZE to other platforms and also defined obsolete option XIP_ROM_BASE. Alias AMD_AGESA as NORTHBRIDGE_AMD_AGESA. Break the circular dependency with family15 Kconfig. Change-Id: Ic7891012220e1bef758a5a39002b66971d5206e3 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/773 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-16ROMCC boards have no XIP limitPatrick Georgi
So set their XIP configuration to ROM_SIZE. Change-Id: I6c1abccec3b1d7389c85df55343ff0fc68a61eec Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/797 Tested-by: build bot (Jenkins) Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2012-03-16Via Epia-N and C3: Set ioapic delivery type in KconfigPatrick Georgi
The original comment says it's a Via C3 and not Epia requirement to deliver IOAPIC interrupts on APIC serial bus. Change-Id: I73c55755e0ec1ac5756b4ee7ccdfc8eb93184e4f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/435 Tested-by: build bot (Jenkins)
2012-03-16Fix address of IDT in real-mode entryKyösti Mälkki
In a case of CS & 0x0fff != 0x0, lidt memory operand does not point to nullidt, this can raise an exception and shutdown the CPU. When an AP CPU receives 8-bit Start-Up IPI vector yzH, it starts execute at physical address 000yz000H. Seems this translates to either yz00:0000 or y000:z000 (CS:IP), depending of the CPU model. With the change entry16.inc is relocatable as the commentary suggests and can be used as ap_sipi_vector on SMP systems. Change-Id: I885a2888179700ba6e2b11d4f2d6a64ddea4c2dc Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/707 Tested-by: build bot (Jenkins) Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-03-09move console includes to central console/console.hStefan Reinauer
Because it's included everywhere anyways. Change-Id: I99a9e6edac08df57c50ef3a706fdbd395cad0abc Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/691 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2012-03-07Move C labels to start-of-linePatrick Georgi
Also mark the corresponding lint test stable. Change-Id: Ib7c9ed88c5254bf56e68c01cdbd5ab91cd7bfc2f Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/772 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-20Fix MTRR TOM2 WB cache setup for AMD CPUs > revF.Marc Jones
The MTRR check for WB TOM2 setting was only checking revF, not extended family revisions. All families above revf indicate 0xf in the family field and have additional bits in the extended family field. Change-Id: I93d719789acda6b7c42de7fd6d4bad2da866a25f Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/627 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-17Remove whitespace.Patrick Georgi
Fix issues reported by new lint test. Change-Id: I077a829cb4a855cbb3b71b6eb5c66b2068be6def Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-16AGESA F15: AGESA family15 model 00-0fh cpu wrapperKerry Sheh
Change-Id: I7580bc063c09d99d3fca8b20cd39df2384a6ad44 Signed-off-by: Kerry Sheh <kerry.she@amd.com> Signed-off-by: Kerry Sheh <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/555 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2012-02-16Intel cpus: use CPU_PHYSMASK_HI define in CARKyösti Mälkki
Unifies models 6ex, 6fx and 106cx. Change-Id: I2bb632c7148a7d937f24eb559f7f4e539d227470 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/638 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-15Intel model_106cx: Use symbolic names for MTRR bitsKyösti Mälkki
Change-Id: I6ea5ca631c22fe870224a498b68d77d85798b3f4 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/637 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-13AMD Geode cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Rename directories and Kconfig as follows: model_lx -> geode_lx model_gx1 -> geode_gx1 model_gx2 -> geode_gx2 Change-Id: Ib8bf1e758b88f9efed1cf8b11c76b796388e7147 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/613 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-10Intel cpus: apply un-written naming rulesKyösti Mälkki
Kconfig directives to select chip drivers for compile literally match the chip directory names capitalized and underscored. Note: CPU_INTEL_CORE2 was used on both model_6fx and model_1067x. Change-Id: I8fa5ba71b14dcce79ab2a2c1c69b3bc36edbdea0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/618 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-02-09Add Intel Socket LGA771Sven Schnelle
Change-Id: Iee7d3ff2884d8c43ff1af498160589e551bc9cc8 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/492 Tested-by: build bot (Jenkins)
2012-02-09VIA cpus: apply un-written naming rulesKyösti Mälkki
Rename files and directories: model_c3 -> c3 model_c7 -> c7 Change-Id: If144fc501e8ae44b347ac44fa90c689c33a8e126 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/614 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-23post code: Replaced hard-coded post code with macroVikram Narayanan
Added a macro in the post code list, which replaces hard coded value in cpu/x86/cache/cache.c Change-Id: I27cb27827272584a8a17a41c111e2dc155196a97 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/572 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-21trivial: spelling fixes in commentsVikram Narayanan
Few spelling fixes in entry16.inc Change-Id: Iad3d18eee3f498171cb766589aaebefdcf0e9767 Signed-off-by: Vikram Narayanan <vikram186@gmail.com> Reviewed-on: http://review.coreboot.org/571 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-20Leave SSE and MMX instructions enabled in corebootStefan Reinauer
In order to use SSE+MMX optimized payloads we don't want to disable SSE+MMX instructions in the CPU after romstage. Change-Id: I51aeb01f04492ad7bc8b1fe181a4ae17fe0ca61e Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/553 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2012-01-10MTRR: get physical address size from CPUIDSven Schnelle
The current code uses static values for the physical address size supported by a CPU. This isn't always the right value: I.e. on model_6[ef]x Core (2) Duo CPUs physical address size is 36, while Xeons from the same family have 38 bits, which results in invalid MTRR setup. Fix this by getting the right number from CPUID. Change-Id: If019c3d9147c3b86357f0ef0d9fda94d49d811ca Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/529 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2012-01-09Fix Geode GX2 + LX caching for tiny bootblock.Nils Jacobs
Change-Id: If681a33deb7df752b37c6a8a20482d3c374af936 Signed-off-by: Nils Jacobs <njacobs8@adsltotaal.nl> Reviewed-on: http://review.coreboot.org/528 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-by: Philip Prindeville <philipp@redfish-solutions.com>
2012-01-09ACPI: mark empty get_cst_entries() weakSven Schnelle
This function prevents the linker from choosing the right get_cst_entries(), preventing writing the _CST tables. Change-Id: I4bc0168aee110171faeaa081f217dfd1536bb821 Signed-off-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/496 Tested-by: build bot (Jenkins)
2011-12-26Fix Fam10 MMCONF_SUPPORT_DEFAULT setting.Marc Jones
I misunderstood how kconfig select works. It needs to be selected with a config option. Moved the select to the correct location. Change-Id: If9b1e21e6cbc5af4671efb76cf87dd18dbbe2234 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/487 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-12-13Use MMCONF for all AMD family 10 CPUs.Marc Jones
This fixes problems in AP init when multiple APs are trying to access PCI config space. All Fam10 CPUs setup and support MMCONF. Change-Id: I00a25bbf4e4152c89024f14a3c4c1c36b48d0128 Signed-off-by: Marc Jones <marcj303@gmail.com> Reviewed-on: http://review.coreboot.org/455 Tested-by: build bot (Jenkins) Reviewed-by: Alec Ari <neotheuser@ymail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-12-05Bootblock does not need a unique boot_cpu()Kyösti Mälkki
Detection of a CPU being a BSP CPU is not dependent of the existence of northbridge and/or southbridge init code in the bootblock. Even if CONFIG_LOGICAL_CPUS==0, boot_cpu() can get executed on an AP CPU of a hyper-threading CPU and needs to return actual BSP bit from MSR. Change-Id: I9187f954bb357ba1dbd459cfe11cc96cb7567968 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/447 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-24Remove unused code files and cosmetic changesKyösti Mälkki
Following files were no longer used in the build and are deleted: src/arch/x86/init/entry.S src/arch/x86/init/ldscript.ld Also fix ugly whitespace in code copyrights and comments. Change-Id: Ia6360b0ffc227f372d5f997495697a101f7ad81b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/440 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-22k8 raminit: add workaround for erratum #181 on non-fam-fFlorian Zumbiehl
Disable DRAM controller on non-fam-f CPUs not using fam-f register layout. Change-Id: I2cc87857452555011d69bfebe9f9c4c17cef8f6c Signed-off-by: Florian Zumbiehl <florz@florz.de> Reviewed-on: http://review.coreboot.org/448 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-11-22Fix post_code in 16bit entryKyösti Mälkki
Relocate early post_code() so it gets executed and does not corrupt BIST at %eax. Change-Id: Ieeebcb23f7c327e501b410eaa60d1e49110ee988 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/439 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01remove trailing whitespaceStefan Reinauer
Change-Id: Ib91889a374515d36a2b12b53aeb12b6ea6e22732 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/364 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-11-01Remove XIP_ROM_BASEPatrick Georgi
The base is now calculated automatically, and all mentions of that config option were typical anyway (4GB - XIP_ROM_SIZE). Change-Id: Icdf908dc043719f3810f7b5b85ad9938f362ea40 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/366 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-30Fix slow CAR execution introduced by 7c7d87182feb78cb2bc02fb3558bef56a41682c9Rudolf Marek
It is meant to be a address and not a dereference. Otherwise MTRR is filled with code and not with the address. This is what I hate at most on the AT&T syntax. Instead of taking the address, it was a dereference. Not greatly visible, except I wondered why opcode is not 0xb4 but 0xa1 and it took another half an our to see it. Change-Id: I6b339656024de8f6e6b3cde63b16b7ff5562d055 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/358 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2011-10-28Get rid of the old romstage-as-bootblock ROM layoutPatrick Georgi
This change removes CONFIG_TINY_BOOTBLOCK, CONFIG_BIG_BOOTBLOCK, and all their uses, assuming TINY_BOOTBLOCK=y, BIG_BOOTBLOCK=n. This might break a couple of boards on runtime, but so far, fixes were quite simple. There's a flag day: Code that relies on CONFIG_TINY_BOOTBLOCK must be adapted. Change-Id: I1e17a4a1b9c9adb8b43ca4db8aed5a6d44d645f5 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/320 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-28Get rid of AUTO_XIP_ROM_BASEPatrick Georgi
That value is now generated from a code address and CONFIG_XIP_ROM_SIZE. This works as MTRRs are fully specified by their size and any address within the range. Change-Id: Id35d34eaf3be37f59cd2a968e3327d333ba71a34 Signed-off-by: Patrick Georgi <patrick@georgi-clan.de> Reviewed-on: http://review.coreboot.org/348 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-25SPEEDSTEP: write _CST tablesSven Schnelle
Change-Id: Idb4b57044808918de343d31519768d0986840f01 Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-on: http://review.coreboot.org/321 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-10-18Activate older Xeon P4 microcodesKyösti Mälkki
As new microcode files were included, the table was not updated with families 0f25 and 0f26. Change-Id: I5bb8be9d7c37eb8406dcb48a4b933eab24639bda Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/290 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-10-17Fixes several issues with amd k8 SSDT P-state generationOskar Enoksson
First issue fixed: For multi-socket CPU the current implementation emitted Processor objects for cores in the first CPU only. This commit fixes the bug by really emitting one Processor object for each core. However, the unlikely case of mixed CPU models is still not handled correctly. Second issue fixed: One loop was wrong in case a processor in the table declares no P-states at all. The rewritten loop is safe. Some possibly dangerous array lengths were also fixed. Third issue: on MP-boards the recommended ramp-voltage (RVO) is 0mV according to the BKDG. The current implementation always set it to 25mV. This commit selects 0 or 25mV depending on CONFIG_MAX_PHYSICAL_CPUS. Fourth issue: If a processor without PowerNow! support was inserted in a system with coreboot configured with SET_FIDVID then the boot process hanged mysteriously and very early. Apparently because init_fidvid_ap tampers with non-existing registers. This commit fixes the bug by bailing out from init_fidvid_ap if PowerNow! capability is missing. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: I61f6e2210b84ccba33a36c5efc866447b7134417 Reviewed-on: http://review.coreboot.org/239 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-15SMM: Move wbinvd after pmode jumpStefan Reinauer
According to Rudolf Marek putting a memory instruction between the CR0 write and the jmp in protected mode switching might hang the machine. Move it after the jmp. There might be a better solution for this, such as enabling the cache, as keeping it disabled does not prevent cache poisoning attacks, so there is no real point. However, Intel docs say that SMM code in ASEG is always running uncached, so we might want to consider running SMM out of TSEG instead, as well. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: Id396acf3c8a79a9f1abcc557af6e0cce099955ec Reviewed-on: http://review.coreboot.org/283 Reviewed-by: Sven Schnelle <svens@stackframe.org> Tested-by: build bot (Jenkins)
2011-10-13Load an IDT with NULL limitStefan Reinauer
Load an IDT with NULL limit to prevent the 16bit IDT being used in protected mode before c_start.S sets up a 32bit IDT when entering ram stage. Signed-off-by: Stefan Reinauer <reinauer@google.com> Change-Id: I8d048c894c863ac4971fcef8f065be6b899e1d3e Reviewed-on: http://review.coreboot.org/259 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-10-11Fixed broken MTRR for >4GB memory on AMD K8 fam 0fh rev <=EOskar Enoksson
AMD K8 rev F and later implements a bit SYSCFG_MSR_TOM2WB to mark dram memory above 4GB as WB. However, AMD K8 rev E and earlier don't implement this bit and therefore need MTRR spanning dram memory above 4GB. The current implementation of amd_setup_mtrrs never generate MTRR above 4GB. This caused memory > 4GB not to be recognized in e.g. Linux on those rev E or older platforms. This commit should fix that bug. Signed-off-by: Oskar Enoksson <enok@lysator.liu.se> Change-Id: Ie568a52a8eb355969c86964d5afc4692e60f69c1 Reviewed-on: http://review.coreboot.org/238 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marcj303@gmail.com>
2011-09-24Add AMD Family 10h PH-E0 supportQingPei Wang
the patch file comes from src/vendorcode/amd/agesa/f12/Proc/CPU/Family/0x10/RevE /F10MicrocodePatch010000bf.c Change-Id: If701c8a908edf1c486665d3ce4df65da0f65c802 Signed-off-by: QingPei Wang <wangqingpei@gmail.com> Reviewed-on: http://review.coreboot.org/202 Tested-by: build bot (Jenkins) Reviewed-by: Peter Stuge <peter@stuge.se>
2011-09-12Miscellaneous AMD F14 warning fixesefdesign98
This commit adds in some more fixes to AMD F14 compile warnings. The change in the mtrr.c file is in prep- aration for changes yet to com, but it is currently innocuous. Change-Id: I6b204fe0af16a97d982f46f0dfeaccc4b8eb883e Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/133 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-09-09Crank up CPU speed on Intel Core and Core2 CPUsPatrick Georgi
The CPUs start on their slowest speed, and were left that way by coreboot. This change will speed up coreboot a bit, as well as systems that don't change the clock for whatever reason. Change-Id: Ia6225eea97299a473cf50eccc6c5e7de830b1ddc Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/176 Tested-by: build bot (Jenkins) Reviewed-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-09-07AMD F14 Rev C0 updateKerry She
Add AMD Family14 Rev C0 cpu id Change-Id: Iacd1c7b20e889da61a2085188766285f27e5c018 Signed-off-by: Kerry She <kerry.she@amd.com> Signed-off-by: Kerry She <shekairui@gmail.com> Reviewed-on: http://review.coreboot.org/160 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-08-06Update AMD F14 Agesa to support Rev C0 cpusefdesign98
This change updates the AMD Agesa code to support the Family 14 rev C0 cpus. It also fixes (again) a ton of warnings, although not all of them are gone. The warning fixes affect code in the Family 12 tree as well, so there are some small changes therein. This code has been tested on a Persimmon and passes Abuild. This is the first (and largest) of a number of commits to complete the upgrade. Change-Id: Id28d9bf7931f8baa2a602f6bb096a5a465ccd20d Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/131 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2011-08-04cpu/intel/slot_1: Init L2 cache on SECC(2) CPUs.Keith Hui
Bring from coreboot v1 support for initializing L2 cache on Slot 1 Pentium II/III CPUs, code names Klamath, Deschutes and Katmai. Build tested on ASUS P2B-LS and P3B-F. Boot tested on P2B-LS with Pentium III 600MHz, Katmai core. Also add missing include of model_68x in slot_1, to address a similar problem fixed for model_6bx by r5945. Also change Deschutes CPU init sequence to match Katmai. Change-Id: I502e8481d1a20f0a2504685e7be16b57f59c8257 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: http://review.coreboot.org/122 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2011-07-22Add SSE3 dependent codeefdesign98
This change separates out changes that were initially found in the commit for XHCI and AHCI changes to "arch/x86/Makefile. inc". It also corrects a comment. The SSE3 dependent code adds a pair of CR4 access functions and a blob of code that re-sets CR4.OSFXSR and CR4.OSXMMEXCPT. Change-Id: Id97256978da81589d97dcae97981a049101b5258 Signed-off-by: Frank Vibrans <frank.vibrans@amd.com> Signed-off-by: efdesign98 <efdesign98@gmail.com> Reviewed-on: http://review.coreboot.org/113 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-26 06:55:59 +0000