summaryrefslogtreecommitdiff
path: root/src/cpu/intel/haswell/Makefile.inc
AgeCommit message (Collapse)Author
2022-09-20cpu/intel/haswell: Update Broadwell ULT µcode updatesAngel Pons
The µcode updates for Broadwell come from coreboot's blobs submodule and have not been updated in at least 7 years. Use the µcode updates available in the intel-microcode submodule. This change forgoes some µcode updates for old Broadwell ULT/ULX steppings with CPUID 0x306d2 and 0x306d3, as well as an old µcode update for Haswell ULT/ULX CPUs with CPUID 0x40651 in favor of a newer intel-microcode revision that was already being used: when the µcode updates are concatenated into one file, the newer µcode update revision would be placed before the older revision, so the latter would never be used. Change-Id: I67f8a58552bd211095c183e6f7a219d60e3be162 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2022-09-20cpu/intel/haswell: Hook up Crystal Well µcode updatesAngel Pons
Commit 27126f135dad3c0e2f91394e7088b2ff50220146 (cpu/intel/haswell: add Crystal Well CPU IDs) introduced new Haswell CPUIDs but did not include any µcode updates for them. It is unknown how this could have worked as the initial µcode inside the CPU can be quite unstable. Intel CPUs with support for FIT (Firmware Interface Table) can have their µcode updated before the x86 reset vector is executed. The µcode updates for Crystal Well CPUID 0x40661 can be found inside the intel-microcode submodule. There are no publicly available µcode updates for Crystal Well CPUID 0x40660 as it is a pre-production stepping, which is not meant to be used anymore. Hook up the available µcode updates for Crystal Well CPUs. Change-Id: If5264f333e681171a2ca4a68be155ffd40a1043b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2022-09-20cpu/intel/haswell: Do not include useless µcode updatesAngel Pons
There are two types of Haswell/Broadwell platforms: Trad(itional) with separate CPU and PCH packages, and ULT/ULX where the CPU and PCH share one package. Mainboards can specify which platform type they are using the `INTEL_LYNXPOINT_LP` Kconfig option. There are so many differences between Trad and ULT/ULX that it's not worth doing runtime detection. The CPUIDs are different for Trad and ULT/ULX platforms, and so are the µcode updates. So, including Trad µcode updates in a coreboot image for an ULT/ULX mainboard makes no sense, and vice versa. Adapt the Makefile so that only relevant µcode updates are added. Also, add a few comments to indicate which updates correspond to which CPUs. TEST=Run binwalk on coreboot.rom to verify included µcode updates for: - Asrock B85M Pro4 (Haswell Trad) - HP Folio 9480M (Haswell ULT/ULX) - Purism Librem BDW (Broadwell ULT/ULX) Change-Id: I6dc9e94ce9fede15cbcbe6be577c48c197a9212a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67524 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-10-26cpu/x86: Introduce and use `CPU_X86_LAPIC`Felix Held
With using a Kconfig option to add the x86 LAPIC support code to the build, there's no need for adding the corresponding directory to subdirs in the CPU/SoC Makefile. Comparing which CPU/SoC Makefiles added (cpu/)x86/mtrr and (cpu/)x86/lapic before this and the corresponding MTRR code selection patch and having verified that all platforms added the MTRR code on that patch shows that soc/example/min86 and soc/intel/quark are the only platforms that don't end up selecting the LAPIC code. So for now the default value of CPU_X86_LAPIC is chosen as y which gets overridden to n in the Kconfig of the two SoCs mentioned above. Change-Id: I6f683ea7ba92c91117017ebc6ad063ec54902b0a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44228 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-26cpu/amd,intel/*/Makefile: don't add cpu/x86/cacheFelix Held
Some CPUs don't use the ramstage-only x86_enable_cache helper function to call enable_cache with some added port 0x80 and console output. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Suggested-by: Angel Pons <th3fanbus@gmail.com> Change-Id: Ia44c7b150cd12d76e463903966f67d86750cbdd9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-10-25cpu,soc/x86: always include cpu/x86/mtrr on x86 CPUs/SoCsFelix Held
All x86-based CPUs and SoCs in the coreboot tree end up including the Makefile in cpu/x86/mtrr, so include this directly in the Makefile in cpu/x86 to add it for all x86 CPUs/SoCs. In the unlikely case that a new x86 CPU/SoC will be added, a CPU_X86_MTRR Kconfig option that is selected be default could be added and the new CPU/SoC without MTRR support can override this option that then will be used in the Makefile to guard adding the Makefile from the cpu/x86/mtrr sub-directory. In cpu/intel all models except model 2065X and 206AX are selcted by a socket and rely on the socket's Makefile.inc to add x86/mtrr to the subdirs, so those models don't add x86/mtrr themselves. The Intel Broadwell SoC selects CPU_INTEL_HASWELL and which added x86/mtrr to the subdirs. The Intel Xeon SP SoC directory contains two sub-folders for different versions or generations which both add x86/mtrr to the subdirs in their Makefiles. Change-Id: I743eaac99a85a5c712241ba48a320243c5a51f76 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/44230 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-09-08cpu/x86/tsc: Deduplicate Makefile logicAngel Pons
The code under `cpu/x86/tsc` is only compiled in when its `Makefile.inc` is included from platform (CPU/SoC) code and the `UDELAY_TSC` Kconfig option is enabled. Include `cpu/x86/tsc/Makefile.inc` once from `cpu/x86/Makefile.inc` and drop the now-redundant inclusions from platform code. Also, deduplicate the `UDELAY_TSC` guards. Change-Id: I41e96026f37f19de954fd5985b92a08cb97876c1 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57456 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-05-18cpu/x86: Only include smm code if CONFIG_HAVE_SMI_HANDLER=yArthur Heymans
This removes the need to include this code separately on each platform. Change-Id: I3d848b1adca4921d7ffa2203348073f0a11d090e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46380 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-01-24soc/intel/broadwell: Move romstage.c to HaswellAngel Pons
Broadwell no longer has CPU code. Change-Id: I9c9717439a702dddaa613a30e6f3da29887ec4bd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46951 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-01-24cpu/intel/haswell: Add Broadwell CPUIDs and microcodeAngel Pons
Broadwell can now use the Haswell CPU driver. Change-Id: I36138cab72b1e3ad0ff7f6434996f5ce00de9d0d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/46942 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-08haswell: relocate `romstage_common` to northbridgeAngel Pons
Other platforms do this as well. It will ease refactoring on follow-ups. Change-Id: I643982a58c6f5370c78acef93740f27df001a06d Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43093 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tristan Corrick <tristan@corrick.kiwi>
2019-10-01cpu/intel/common: Move intel_ht_sibling() to common folderPatrick Rudolph
Make intel_ht_sibling() available on all platforms. Will be used in MP init to only write "Core" MSRs from one thread on HyperThreading enabled platforms, to prevent race conditions and resulting #GP if MSRs are written twice or are already locked. Change-Id: I5d000b34ba4c6536dc866fbaf106b78e905e3e35 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35619 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2019-09-24cpu/intel: Use CPU_INTEL_COMMON_TIMEBASEKyösti Mälkki
Change-Id: I0e7159039751a88d86b6c343be5f085e6e15570a Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/31342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-08-03intel/haswell: Move stage_cache support functionKyösti Mälkki
Let garbage-collection take care of stage_cache_external_region() if it is no needed and move implementation to a suitable file already building for needed stages. Remove aliasing CONFIG_RESERVED_SMM_SIZE as RESERVED_SMM_SIZE. Change-Id: Ie6fcc40fba14575e8ee058f45a1a359a05f00aca Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34668 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2019-07-13intel/haswell: Replace monotonic timerKyösti Mälkki
Remove implementation of 24 MHz clock, available only on Haswell ULT SKUs. Use TSC_MONOTONIC_TIMER instead for all boards. Change-Id: Ic4aeb084d1b0913368f5eaa46e1bd68411435517 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34114 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-07-09arch/x86: Avoid HAVE_SMI_HANDLER conditional with smm-classKyösti Mälkki
Build of the entire smm-class is skipped if we have HAVE_SMI_HANDLER=n. Change-Id: I10b4300ddd18b1673c404b45fd9642488ab3186c Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/34125 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lance Zhao <lance.zhao@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-07-01Use 3rdparty/intel-microcodeArthur Heymans
Instead of maintaining this in 3rdparty/blobs use the 3rdparty/intel-microcode which is maintained by Intel. This allows for some finegrained control where family+model span multiple targets. Microcode updates present in 3rdparty/blobs/soc/intel/{baytrail,broadwell} are left out since those contain updates not present in the Intel repo. Those are presumably early CPU samples that did not end up in products. The following MCU are get a new revision: old: sig 0x000306c3, pf_mask 0x32, 2018-04-02, rev 0x0025, size 23552 sig 0x00040651, pf_mask 0x72, 2018-04-02, rev 0x0024, size 22528 sig 0x000206a7, pf_mask 0x12, 2018-04-10, rev 0x002e, size 12288 sig 0x000306a9, pf_mask 0x12, 2018-04-10, rev 0x0020, size 13312 sig 0x000706a1, pf_mask 0x01, 2018-05-22, rev 0x0028, size 73728 sig 0x000506c9, pf_mask 0x03, 2018-05-11, rev 0x0032, size 16384 sig 0x000506ca, pf_mask 0x03, 2018-05-11, rev 0x000c, size 14336 sig 0x000806e9, pf_mask 0xc0, 2018-03-24, rev 0x008e, size 98304 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000906ea, pf_mask 0x22, 2018-05-02, rev 0x0096, size 97280 sig 0x000906eb, pf_mask 0x02, 2018-03-24, rev 0x008e, size 98304 sig 0x00050665, pf_mask 0x10, 2018-04-20, rev 0xe00000a, size 18432 sig 0x000506e3, pf_mask 0x36, 2018-04-17, rev 0x00c6, size 99328 sig 0x000906e9, pf_mask 0x2a, 2018-03-24, rev 0x008e, size 98304 sig 0x000406e3, pf_mask 0xc0, 2018-04-17, rev 0x00c6, size 99328 new: sig 0x000306c3, pf_mask 0x32, 2019-02-26, rev 0x0027, size 23552 sig 0x00040651, pf_mask 0x72, 2019-02-26, rev 0x0025, size 21504 sig 0x000206a7, pf_mask 0x12, 2019-02-17, rev 0x002f, size 12288 sig 0x000306a9, pf_mask 0x12, 2019-02-13, rev 0x0021, size 14336 sig 0x000706a1, pf_mask 0x01, 2019-01-02, rev 0x002e, size 73728 sig 0x000506c9, pf_mask 0x03, 2019-01-15, rev 0x0038, size 17408 sig 0x000506ca, pf_mask 0x03, 2019-03-01, rev 0x0016, size 15360 sig 0x000806e9, pf_mask 0xc0, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000906ea, pf_mask 0x22, 2019-04-01, rev 0x00b4, size 98304 sig 0x000906eb, pf_mask 0x02, 2019-04-01, rev 0x00b4, size 99328 sig 0x00050665, pf_mask 0x10, 2019-03-23, rev 0xe00000d, size 19456 sig 0x000506e3, pf_mask 0x36, 2019-04-01, rev 0x00cc, size 100352 sig 0x000906e9, pf_mask 0x2a, 2019-04-01, rev 0x00b4, size 99328 sig 0x000406e3, pf_mask 0xc0, 2019-04-01, rev 0x00cc, size 100352 Change-Id: Idcfb3c3c774e0b47637e1b5308c28002aa044f1c Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2019-06-21cpu/intel/haswell: Link monotonic_timer.c in early stagesArthur Heymans
This is needed for SPI flash console in bootblock/romstage/postcar. Change-Id: I18253cc028e87cd31879d722a6d788917e9c97b3 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33191 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2019-06-21cpu/intel/haswell: Link tsc_freq.c in the bootblockArthur Heymans
This provides tsc_freq_mhz implementation. Change-Id: Ic6a84336f89a37aa412a9cc8c375fbd41dc09cf2 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/33176 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
2019-04-21nb/intel/haswell: Add an option for where verstage startsArthur Heymans
Previously Haswell used a romcc bootblock and starting verstage in romstage was madatory but with C_ENVIRONMENT_BOOTBLOCK it is also possible to have a separate verstage. This selects using a separate verstage by default but still keeps the option around to use verstage in romstage. Also make sure mrc.bin is only added to the COREBOOT fmap region as it requires to be run at a specific offset. This means that coreboot will have to jump from a RW region to the RO region for that binary and back to that RW region after that binary is done initializing the memory. Change-Id: I3b7b29f4a24c0fb830ff76fe31a35b6afcae4e67 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26926 Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2019-04-21cpu/intel/haswell: Use C_ENVIRONMENT_BOOTBLOCKArthur Heymans
This puts the cache-as-ram init in the bootblock. Before setting up cache as ram the microcode updates are applied. This removes the possibility for a normal/fallback setup although implementing this should be quite easy. Tested on Google peppy (Acer C720). Setting up LPC in the bootblock to output console on SuperIOs is not done in this patch, hence BOOTBLOCK_CONSOLE is not yet enabled by default. Change-Id: Ia96499a9d478127f6b9d880883ac41397b58dbea Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/26859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2019-02-25security/vboot: Add measured boot modePhilipp Deppenwiese
* Introduce a measured boot mode into vboot. * Add hook for stage measurements in prog_loader and cbfs. * Implement and hook-up CRTM in vboot and check for suspend. Change-Id: I339a2f1051e44f36aba9f99828f130592a09355e Signed-off-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/29547 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-11-01cpu/intel/haswell: Allow use of TSC for the monotonic timerTristan Corrick
When the Haswell-specific monotonic timer is used on an ASRock H81M-HDS with a Pentium G3258, the following exception is generated, causing the system to hang. CPU Index 0 - APIC 0 Unexpected Exception:13 @ 10:7f7a3736 - Halting Code: 0 eflags: 00010006 cr2: 00000000 eax: 00262626 ebx: 00140000 ecx: 00000603 edx: 00360000 edi: 00000007 esi: 00262626 ebp: 7f7c0fd8 esp: 7f7c0e90 The exception occurs when trying to read `MSR_COUNTER_24_MHz`, located at 0x637. This MSR only exists on Haswell-ULT CPUs. So, allow boards to use the TSC monotonic timer instead. They can do this by placing `select TSC_MONOTONIC_TIMER` in the mainboard Kconfig. Change-Id: I31d0e801b8cc85330dcb70c3fc03670f2e677e8f Signed-off-by: Tristan Corrick <tristan@corrick.kiwi> Reviewed-on: https://review.coreboot.org/29383 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-14cpu/intel/haswell: Use the common intel romstage_main functionArthur Heymans
Tested on Google peppy (Acer C720). Change-Id: I6453c40bf4ebe4695684c1bd3a403d6def82814f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26835 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-06-05cpu/intel/haswell: Switch to POSTCAR_STAGEArthur Heymans
Tested on Google Peppy (Acer C720). Change-Id: I1802547d7a5b3875689cc4e126e7c189a75defa9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26793 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-06-05cpu/intel/car/non-evict: Prepare for some POSTCAR_STAGE supportArthur Heymans
Prepare a common cache as ram for CPU's featuring a Non eviction mode MSR. Change-Id: I7fa3853498856050855b3b97546f4d31f66d12f7 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/26789 Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2016-12-27cpu/intel/common: Add/Use common function to set virtualizationMatt DeVillier
Migrate duplicated enable_vmx() method from multiple CPUs to common folder. Add common virtualization option for CPUs which support it. Note that this changes the default to enable virtualization on CPUs that support it. Change-Id: Ib110bed6c9f5508e3f867dcdc6f341fc50e501d1 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/17874 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2015-09-30cpu: microcode: Use microcode stored in binary formatAlexandru Gagniuc
Using a copiler to compile something that's already a binary is pretty stupid. Now that Stefan converted most microcode in blobs to a plain binary, use the binary version. Change-Id: Iecf1f0cdf7bbeb7a61f46a0cd984ba341af787ce Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-on: http://review.coreboot.org/11607 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-09-04x86: remove cpu_incs as romstage Make variableAaron Durbin
When building up which files to include in romstage there were both 'cpu_incs' and 'cpu_incs-y' which were used to generate crt0.S. Remove the former to settle on cpu_incs-y as the way to be included. BUG=chrome-os-partner:44827 BRANCH=None TEST=Built rambi. No include file changes. Change-Id: I8dc0631f8253c21c670f2f02928225ed5b869ce6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/11494 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2015-05-19intel/haswell: Drop MONOTONIC_TIMER_MSRPatrick Georgi
The variable was set on all haswell boards, so we can do it like on broadwell where the MSR based timer is assumed to be around, too. Change-Id: Id48ad7454d4cf83c3b1616b64687cdcfee4baa10 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: http://review.coreboot.org/10256 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2015-05-05haswell: Link stage_cache_external_region into ramstage, tooSol Boucher
When CONFIG_CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM is set, this function is now linked into the ramstage as well as the romstage, since the former makes calls to it in panther builds. With this commit, it's possible to build panther using the config file from the Chromium OS project[1] if you supply the appropriate Intel descriptor and ME binary blobs and manually set CONFIG_VBOOT_VERIFY_FIRMWARE=n, CONFIG_BUILD_WITH_FAKE_IFD=n, and CONFIG_HAVE_ME_BIN=y. The resulting image is at least able to load a payload, although I only tested with depthcharge, which immediately complained, "vboot handoff pointer is NULL" and gave up the ghost. [1] https://chromium.googlesource.com/chromiumos/overlays/chromiumos-overlay/+/master/sys-boot/coreboot/files/configs/config.panther Change-Id: Id3bb510fa60129a4d36a0117dc33e7aa62d6c742 Signed-off-by: Sol Boucher <solb@chromium.org> Reviewed-on: http://review.coreboot.org/10046 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-04-30cpu/intel/haswell: remove dependency on socket_rpga989Matt DeVillier
Remove dependency of Haswell on cpu/intel/socket_rpga989 code, which is a carry-over from Sandy Bridge/Ivy Bridge and older coreboot conventions where features were structured around socket types. Add CPU-specific options to Kconfig and required subdirs to Makefile.inc which are curently included with socket_rpga989. TEST=successfully built and booted on google/panther Change-Id: Ic788e2928df107d11ea2d2eca7613490aaed395c Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: http://review.coreboot.org/10037 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2015-03-17haswell: Fix monotonic timer integrationStefan Reinauer
In some previous attempt to enable monotonic timers on all platforms, the LAPIC monotonic timer was selected for Haswell devices, despite the fact that LAPIC timers are not used in coreboot on Haswell (See haswell Kconfig) and there already was a monotonic timer implementation enabled that just needed to be added for SMM as well. Change-Id: I6beb2977864e507956636860ed463e1991cea1ed Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/8702 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-10-16ACPI: Remove CONFIG_GENERATE_ACPI_TABLESVladimir Serbinenko
As currently many systems would be barely functional without ACPI, always generate ACPI tables if supported. Change-Id: I372dbd03101030c904dab153552a1291f3b63518 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: http://review.coreboot.org/4609 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2014-05-05haswell: move to mp_init libraryAaron Durbin
The mp_init library was based off of haswell code, but baytrail was the first chipset to take advantage of it. Move haswell over to using it so that the code duplication can be removed. Change-Id: Id6e9464df028aa6ec138051f925817c85b4c13e5 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5413 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2014-03-20rmodules: use rmodtool to create rmodulesAaron Durbin
Start using the rmodtool for generating rmodules. rmodule_link() has been changed to create 2 rules: one for the passed in <name>, the other for creating <name>.rmod which is an ELF file in the format of an rmodule. Since the header is not compiled and linked together with an rmodule there needs to be a way of marking which symbol is the entry point. __rmodule_entry is the symbol used for knowing the entry point. There was a little churn in SMM modules to ensure an rmodule entry point symbol takes a single argument. Change-Id: Ie452ed866f6596bf13f137f5b832faa39f48d26e Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/5379 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2013-05-07haswell: use tsc for udelay()Aaron Durbin
Instead of using the local apic timer for udelay() use the tsc. That way SMM, romstage, and ramstage all use the same delay functionality. Change-Id: I024de5af01eb5de09318e13d0428ee98c132f594 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3169 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-05-01haswell: 24MHz monotonic time implementationAaron Durbin
Haswell ULT devices have a 24MHz package-level counter. Use this counter to provide a timer_monotonic_get() implementation. Change-Id: Ic79843fcbfbbb6462ee5ebd12b39502307750dbb Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3153 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-19haswell: Parallel AP bringupAaron Durbin
This patch parallelizes the AP startup for Haswell-based devices. It does not touch the generic secondary startup code. Instead it provides its own MP support matching up with the Haswell BWG. It seemed to be too much trouble to support the old startup way and this new way. Because of that parallel loading is the only thing supported. A couple of things to note: 1. Micrcode needs to be loaded twice. Once before MTRR and caching is enabled. And a second time after SMM relocation. 2. The sipi_vector is entirely self-contained. Once it is loaded and written back to RAM the APs do not access memory outside of the sipi_vector load location until a sync up in ramstage. 3. SMM relocation is kicked off by an IPI to self w/ SMI set as the destination mode. The following are timings from cbmem with dev mode disabled and recovery mode enabled to boot directly into the kernel. This was done on the baskingridge CRB with a 4-core 8-thread CPU and 2 DIMMs 1GiB each. The kernel has console enabled on the serial port. Entry 70 is the device initialization, and that is where the APs are brought up. With these two examples it looks to shave off ~200 ms of boot time. Before: 1:55,382 2:57,606 (2,223) 3:3,108,983 (3,051,377) 4:3,110,084 (1,101) 8:3,113,109 (3,024) 9:3,156,694 (43,585) 10:3,156,815 (120) 30:3,157,110 (295) 40:3,158,180 (1,069) 50:3,160,157 (1,977) 60:3,160,366 (208) 70:4,221,044 (1,060,677) 75:4,221,062 (18) 80:4,227,185 (6,122) 90:4,227,669 (484) 99:4,265,596 (37,927) 1000:4,267,822 (2,225) 1001:4,268,507 (685) 1002:4,268,780 (272) 1003:4,398,676 (129,896) 1004:4,398,979 (303) 1100:7,477,601 (3,078,621) 1101:7,480,210 (2,608) After: 1:49,518 2:51,778 (2,259) 3:3,081,186 (3,029,407) 4:3,082,252 (1,066) 8:3,085,137 (2,884) 9:3,130,339 (45,202) 10:3,130,518 (178) 30:3,130,544 (26) 40:3,131,125 (580) 50:3,133,023 (1,897) 60:3,133,278 (255) 70:4,009,259 (875,980) 75:4,009,273 (13) 80:4,015,947 (6,674) 90:4,016,430 (482) 99:4,056,265 (39,835) 1000:4,058,492 (2,226) 1001:4,059,176 (684) 1002:4,059,450 (273) 1003:4,189,333 (129,883) 1004:4,189,770 (436) 1100:7,262,358 (3,072,588) 1101:7,263,926 (1,567) Booted the baskingridge board as noted above. Also analyzed serial messages with pcserial enabled. Change-Id: Ifedc7f787953647c228b11afdb725686e38c4098 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2779 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18haswell: adjust CAR usageAaron Durbin
It was found that the Haswell reference code was smashing through the stack into the reference code's heap implementation. The reason for this is because our current CAR allocation is too small. Moreover there are quite a few things to coordinate between 2 code bases to get correct. This commit separates the CAR into 2 parts: 1. MRC CAR usage. 2. Coreboot CAR usage. Pointers from one region can be passed between the 2 modules, but one should not be able to affect the others as checking has been put into place in both modules. The CAR size has effectively been doubled from 0x20000 (128 KiB) to 0x40000 (256KiB). Not all of that increase was needed, but enforcing a power of 2 size only utilizes 1 MTRR. Old CAR layout with a single contiguous stack with the region starting at CONFIG_DCACHE_RAM_BASE: +---------------------------------------+ Offset CONFIG_DCACHE_RAM_SIZE | MRC global variables | | CONFIG_DCACHE_RAM_MRC_VAR_SIZE bytes | +---------------------------------------+ | ROM stage stack | | | | | +---------------------------------------+ | MRC Heap 30000 bytes | +---------------------------------------+ | ROM stage console | | CONFIG_CONSOLE_CAR_BUFFER_SIZE bytes | +---------------------------------------+ | ROM stage CAR_GLOBAL variables | +---------------------------------------+ Offset 0 There was some hard coded offsets in the reference code wrapper to start the heap past the console buffer. Even with this commit the console can smash into the following region depending on what size CONFIG_CONSOLE_CAR_BUFFER_SIZE is. As noted above This change splits the CAR region into 2 parts starting at CONFIG_DCACHE_RAM_BASE: +---------------------------------------+ | MRC Region | | CONFIG_DCACHE_RAM_MRC_VAR_SIZE bytes | +---------------------------------------+ Offset CONFIG_DCACHE_RAM_SIZE | ROM stage stack | | | | | +---------------------------------------+ | ROM stage console | | CONFIG_CONSOLE_CAR_BUFFER_SIZE bytes | +---------------------------------------+ | ROM stage CAR_GLOBAL variables | +---------------------------------------+ Offset 0 Another variable was add, CONFIG_DCACHE_RAM_ROMSTAGE_STACK_SIZE, which represents the expected stack usage for the romstage. A marker is checked at the base of the stack to determine if either the stack was smashed or the console encroached on the stack. Change-Id: Id76f2fe4a5cf1c776c8f0019f406593f68e443a7 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2752 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-18haswell: Use SMM ModulesAaron Durbin
This commit adds support for using the SMM modules for haswell-based boards. The SMI handling was also refactored to put the relocation handler and permanent SMM handler loading in the cpu directory. All tseg adjustment support is dropped by relying on the SMM module support to perform the necessary relocations. Change-Id: I8dd23610772fc4408567d9f4adf339596eac7b1f Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2728 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-03-14haswell: Add initial support for Haswell platformsAaron Durbin
The Haswell parts use a PCH code named Lynx Point (Series 8). Therefore, the southbridge support is included as well. The basis for this code is the Sandybridge code. Management Engine, IRQ routing, and ACPI still requires more attention, but this is a good starting point. This code partially gets up through the romstage just before training memory on a Haswell reference board. Change-Id: If572d6c21ca051b486b82a924ca0ffe05c4d0ad4 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/2616 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 08:11:02 +0000