summaryrefslogtreecommitdiff
path: root/src/arch/riscv
AgeCommit message (Collapse)Author
2018-09-04riscv: Add DEFINE_MPRV_READ_MXR to read execution-only pageXiang Wang
Must to set MXR, when needs to read the page which is execution-only. So make this change. Change-Id: I19519782fe791982a8fbd48ef33b5a92a3c48bfc Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-09-02riscv: separately define stack locations at different stagesXiang Wang
BOOTBLOCK/ROMSTAGE run in CAR/scratchpad. When RAMSTAGE begins execution will enable cache, then CAR will disappear. So the Stack will be separated. Change-Id: I37a0c1928052cabf61ba5c25b440363b75726782 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/28383 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-08-30riscv: update the definition of intptr_t/uintptr_tXiang Wang
These RISC-V ABIs defined by GCC : ilp32 ilp32d ilp32f lp64 lp64d lp64f. Through this we know that the length of the long's bit is equal to pointer. So update this code. This's more flexible. Change-Id: I16e1a2c12c6034df75dc360b65acb1b6affec49b Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27768 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-08-07arch: Retire cache_sync_instructions() from <arch/cache.h> (except arm)Julius Werner
cache_sync_instructions() has been superseded by arch_program_segment_loaded() and friends for a while. There are no uses in common code anymore, so let's remove it from <arch/cache.h> for all architectures. arm64 still has an implementation and one reference, but they are not really needed since arch_program_segment_loaded() does the same thing already. Remove them. Leave it in arm(32) since there are several references (including in SoC code) that I don't feel like tracking down and testing right now. Change-Id: I6b776ad49782d981d6f1ef0a0e013812cf408524 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/27879 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-08-01riscv: remove redundancy in MakefileXiang Wang
src/arch/riscv/stages.c is an entry of romstage/ramstage, and does not needs to be bootblock. src/arch/riscv/id.S src/arch/riscv/id.ld is used to generate some compile/board/time information, which is repeated with src/lib/version.c Change-Id: Ic736b378e24df387584c5f86a2b04078fc55723d Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27557 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-31riscv: fix issues (timestrap & PRIu64)Xiang Wang
When I tried to compile the RISC-V code (202e7d4f3c), I found some errors: `PRIu64` is undefined src/arch/riscv/timestamp.c does not exist Currently RISC-V does not have the implementation and use of timestamp, so I temporarily delete the code related to timestamp in the Makefile. And define PRIu64. Change-Id: I7f1a0793113bce7c1411e39f102cf20dbadda5d6 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27543 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-30riscv: delete src/arch/riscv/prologue.incXiang Wang
This code was copied from x86. It is not needed for RISC-V. Change-Id: If6c3bfdc4090e45d171e68a28d27c38dabe91687 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27544 Reviewed-by: Philipp Hug <philipp@hug.cx> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-18arch/riscv: Fix makefile to only set flags for riscvMartin Roth
This was updating flags for ALL architectures, not just riscv. That was bad, and gave us errors, although they weren't fatal for some reason: i386-elf-gcc: error: missing argument to '-mcmodel=' i386-elf-gcc: error: missing argument to '-march=' i386-elf-gcc: error: missing argument to '-mabi=' This issue started from commit 5fed693a (riscv: add support for modifying compiler options) Add comments to the other 'endif' statements since they're now surrounded by a global ifeq Change-Id: Ifa12ad98b04a5ac36148609ccdf46ca427fc5a27 Signed-off-by: Martin Roth <martin@coreboot.org> Reviewed-on: https://review.coreboot.org/27535 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-07-18riscv: add CAR interface Xiang Wang
Add an interface to support cache as ram. Initialize stack pointer for each hart. Change-Id: Ic3920e01dd1a7f047a53de57250589000a111409 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27430 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-07-17riscv: add support for modifying compiler optionsXiang Wang
Each HART of a SoC like fu540 supports a different ISA. In order for the coreboot's code can run on each core, need to modify the compile options. So add this code. Change-Id: Ie33edc175e612846d4a74f3cbf7520d4145cb68b Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27442 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-12riscv: add include/arch/smp/ directoryXiang Wang
Replicate directory layout from x86 for SMP. Change-Id: I27aee55f24d96ba9e7d8f2e6653f6c9c5e85c66a Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27355 Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-07-11riscv: add support to check ISA extensionXiang Wang
Add support to check ISA extension for RISC-V. Change-Id: I5982fb32ed1dd435059edc6aa0373bffa899e160 Signed-off-by: Xiang Wang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27410 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Philipp Hug <philipp@hug.cx>
2018-07-06riscv: use __riscv_atomic to check support A extensionXiang Wang
GCC pre-defined some macros for detecting ISA extensions. We should use these macros to detect ISA features. Change-Id: I5782cdd1bf64b0161c58d789f46389dccfe44475 Signed-off-by: XiangWang <wxjstz@126.com> Reviewed-on: https://review.coreboot.org/27300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2018-04-27RISC-V boards: Remove PAGETABLES section from memlayout.ldJonathan Neuschäfer
RISC-V doesn't set up page tables anymore, since commit b26759d703 ("arch/riscv: Don't set up virtual memory"). Change-Id: Id1e759b63fb0bc88ab256994d3849d16814affa0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25701 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-26arch/riscv: Store mprv bit in size_tJonathan Neuschäfer
CSRs are XLEN bits wide (i.e. the same width as general purpose registers), so size_t seems a little more correct than int. This change doesn't affect functionality because MSTATUS_MPRV already fits in 31 bits. Change-Id: I003c1b88b4493681dc9b6178ac785be330203ef5 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25625 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-04-11arch/riscv: Remove I/O space access functions (outb, etc.)Jonathan Neuschäfer
RISC-V does not have the kind of I/O space that x86 has. Other architectures tend to leave out these definitions as well. Change-Id: I7328dae1f1fa4ef8772750244a0b11a3fa5aa88f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/25566 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-02-20arch/riscv: Delegate the page fault exceptionsJonathan Neuschäfer
These exceptions were new in the Privileged Architecture spec 1.10. We need to delegate them to S-mode. Change-Id: Iec15afe9656107b9aeea1677c5b8dc7d654fa746 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Update encoding.h and adjust related codeJonathan Neuschäfer
Update encoding.h to the version shipped with spike commit 0185d36 ("Merge pull request #165 from riscv/small_progbuf"), and copy the license header from the LICENSE file. Change-Id: I517042e5865986e88a589dc8623745f8d584d6b8 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Pass the bootrom-provided FDT to the payloadJonathan Neuschäfer
The RISC-V boot protocol foresees that at every stage boundary (bootrom to boot loader, boot loader -> OS), register a0 contains the Hart ID and a1 contains the physical address of the Flattened Device Tree that the stage shall use. As a first step, pass the bootrom-provided FDT to the payload, unmodified. Change-Id: I468bc64a47153d564087235f1c7e2d10e3d7a658 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Don't set up virtual memoryJonathan Neuschäfer
Due to changes in the RISC-V Privileged Architecture specification, Linux can now be started in physical memory and it will setup its own page tables. Thus we can delete most of virtual_memory.c. Change-Id: I4e69d15f8ee540d2f98c342bc4ec0c00fb48def0 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Make RVC support configurableJonathan Neuschäfer
In order to support RISC-V processors with and without the RVC extension, configure the architecture variant (-march=...) explicitly. NOTE: Spike does support RVC, but currently doesn't select ARCH_RISCV_COMPRESSED, because coreboot's trap handler doesn't support RVC. Change-Id: Id4f69fa6b33604a5aa60fd6f6da8bd966494112f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23733 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2018-02-20arch/riscv: Align trap_entry to 4 bytes, as required by specJonathan Neuschäfer
The RISC-V Privileged Architecture spec 1.10 requires that the address part of mtvec is four-byte aligned. The lower two bits encode a "mode" flag and should be zero for now. Add the necessary alignment directive before trap_entry. Change-Id: I83ea23e2c8f984775985ae7d61f80ad75286baaa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Remove supervisor_trap_entryJonathan Neuschäfer
coreboot only maintains a single trap entry, because it only runs in machine mode. Change-Id: I7324d9c8897d5c4e9d4784e7bc2a055890eab698 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02riscv: Remove config string supportJonathan Neuschäfer
The code dealing with the old config string isn't needed anymore, because the config string has been deprecated in favor of OpenFirmware-derived devicetrees. Change-Id: I71398fb4861dbaf7eefc6e6f222bb7159798fafa Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22594 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Remove the current SBI implementationJonathan Neuschäfer
This Supervisor Binary Interface, which is based on a page of code that's provided to operating systems by the M-mode software, has been superseded by a different (currently not really documented) SBI, which is based on directly executing ECALLs instructions. Thus some of our code becomes obsolete. Just rip it out until we implement the new SBI. Change-Id: Iec9c20b750f39a2b8f1553e25865bbf150605a6d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22593 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Return from trap_handler instead of jumping outJonathan Neuschäfer
Change-Id: I8dbed5dbe377d3a02e58a3bc16a1ee112b28bea9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21764 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-12-02arch/riscv: Unify trap returnJonathan Neuschäfer
Change-Id: I9de0c92b3f925e8f4db00d7281222a07db68b2ae Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21763 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-23Constify struct cpu_device_id instancesJonathan Neuschäfer
There is currently no case where a struct cpu_device_id instance needs to be modified. Thus, declare all instances as const. Change-Id: I5ec7460b56d75d255b3451d76a46df76a51d6365 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/22526 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2017-11-07arch/riscv: Use a separate trap stackJonathan Neuschäfer
This is the lazy solution, as explained in the comment, but it works for now. Change-Id: I46e18b6d633280d6409e42462500fbe7c6823b4d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: gettimer: Don't use the config stringJonathan Neuschäfer
Accessing the config string doesn't work anymore on current versions of spike. Thus return dummy pointers until we have a better solution. Change-Id: I684fc51dc0916f2235e57e36b913d363e1cb02b1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: Drop mret workaroundJonathan Neuschäfer
Our toolchain can compile mret now, and once the encoding changes, we'll have to adjust the code anyway. Change-Id: Ic37a849f65195006fa15d74f651a8aa9a9da5b5c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21762 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: mprv_read_*: Mark result as earlyclobberJonathan Neuschäfer
This fixes a case of mstatus corruption, where GCC generated code that used the same register for the mprv bit and the result. GCC inline assembly register modifiers are documented here: https://gcc.gnu.org/onlinedocs/gcc/Modifiers.html Change-Id: I2c563d171892c2e22ac96b34663aa3965553ceb3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-11-07arch/riscv: Fix return type of mprv_read_u64Jonathan Neuschäfer
Change-Id: I3dc12feefe5f0762e27d2ad0234371e91313c847 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21929 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27arch/riscv: hls_init: Initialize time{,cmp} with dummy pointersJonathan Neuschäfer
In current versions of spike, the config string is not available anymore, because RISC-V is moving toward OpenFirmware-derived device trees (either in FDT or text format). Using query_config_string leads to a crash in these versions of spike. With this commit and If0bea4bf52d ("riscv: Update register address"), coreboot reaches the romstage again, on spike. Change-Id: Ib1e6565145f0b2252deb1f4658221a4f816e2af4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27arch/riscv: Document mprv_{read,write}_* functionsJonathan Neuschäfer
Change-Id: Iaf0cb241f0eb4de241f0983c0b32dbcc28f96480 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21342 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-27arch/riscv: trap handler: Print load/store access width in bitsJonathan Neuschäfer
This is easier to read than the raw shift amount that's extracted from load/store instructions. Change-Id: Ia16ab9fbaf55345b654ea65e65267ed900eb29e1 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/21654 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-09-26riscv: Update register addresswxjstz
I triggered a bug, when I try to debug riscv code by spike. This bug is caused by an instruction exception[csrwi 0x320,7]. This is operate for mcounteren. This address is error. 0x306 is right. scounteren is not need to be set, because S-mode code controls it. Change-Id: If0bea4bf52d8ad2fb2598724d6feb59dc1b3084a Signed-off-by: wxjstz<wxjstz@126.com> Reviewed-on: https://review.coreboot.org/20043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-07-25src/arch: Fix checkpatch warning: no spaces at the start of a lineMartin Roth
Change-Id: Id9846ceb714dceaea12ea33ce2aa2b8e5bb6f4df Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20728 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2017-07-07arch/*: Update Kconfig symbol usageMartin Roth
- Update all symbols to use IS_ENABLED() - Update non-romcc usage to use 'if' instead of '#if' where it makes sense. Change-Id: I5a84414d2d1631e35ac91efb67a0d4c1f673bf85 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20005 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-06-07src: change coreboot to lowercaseMartin Roth
The word 'coreboot' should always be written in lowercase, even at the start of a sentence. Change-Id: I7945ddb988262e7483da4e623cedf972380e65a2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/20029 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2017-05-30arch: Unify basic cache clearing APIJulius Werner
Caching is a very architecture-specific thing, but most architectures have a cache in general. Therefore it can be useful to have a generic architecture-independent API to perform simple cache management tasks from common code. We have already standardized on the dcache_clean/invalidate naming scheme that originally comes from ARM in libpayload, so let's just do the same for coreboot. Unlike libpayload, there are other things than just DMA coherency we may want to achieve with those functions, so actually implement them for real even on architectures with cache-snooping DMA like x86. (In the future, we may find applications like this in libpayload as well and should probably rethink the API there... maybe move the current functionality to a separate dma_map/unmap API instead. But that's beyond scope of this patch.) Change-Id: I2c1723a287f76cd4118ef38a445339840601aeea Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/19788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Philippe Mathieu-Daudé <philippe.mathieu.daude@gmail.com>
2017-02-20riscv: Suppress invalid coverity errorsMartin Roth
Coverity is detecting 'sp' as a variable which has not been initialized. This is obviously not correct, so this patch *TRIES* to mark it as false I'm not positive that this will work because the annotation needs to go on the line above the error, but this error is inside of a # define. Does the whole #define count as one line? Can it go on the line above the #define in the .h file? Does it have to precede every line where the #define is used? The documentation doesn't make this clear. Should suppress coverity issues: 1368525 & 1368527 uninit_use: Using uninitialized value sp. Change-Id: Ibae5e206c4ff47991ea8a11b6b59972b24b71796 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/18247 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2017-01-16riscv: Move mcall numbers to mcall.h, adjust their namesJonathan Neuschäfer
The new name and location make more sense: - The instruction used to call into machine mode isn't called "ecall" anymore; it's mcall now. - Having SBI_ in the name is slightly wrong, too: these numbers are not part of the Supervisor Binary Interface, they are just used to forward SBI calls (they could be renumbered arbitrarily without breaking an OS that's run under coreboot). Also remove mcall_dev_{req,resp} and the corresponding mcall numbers, which are no longer used. Change-Id: I76a8cb04e4ace51964b1cb4f67d49cfee9850da7 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18146 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2017-01-16riscv: get SBI calls to workRonald G. Minnich
SBI calls, as it turned out, were never right. They did not set the stack correctly on traps. They were not correctly setting the MIP instead of the SIP (although this was not really well documented). On Harvey, we were trying to avoid using them, and due to a bug in SPIKE, our avoidance worked. Once SPIKE was fixed, our avoidance broke. This set of changes is tested and working with Harvey which, for the first time, is making SBI calls. It's not pretty and we're going to want to rework trap_util.S in coming days. Change-Id: Ibef530adcc58d33e2c44ff758e0b7d2acbdc5e99 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/18097 Tested-by: build bot (Jenkins)
2016-12-20riscv: enable counters via m[us]counterenRonald G. Minnich
The user and supervisor counters could not be safely enabled before as the register numbers were not finalized. Now that everyone agrees, we can enable them. Until we are sure the toolchains are caught up, we use the hardcode name with the register names in comments. As soon as toolchains settle down we'll do one more pass and convert to the symbolic names. Tested on lowrisc bitstream and SPIKE simulator. Change-Id: I21fe5cac44fafe4b7806e004c179aa27541be4b6 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17920 Tested-by: build bot (Jenkins) Reviewed-by: Alex Bradbury <asb@lowrisc.org> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-by: Andrew Waterman <aswaterman@gmail.com>
2016-12-18riscv: Add support for timer interruptsRonald G. Minnich
RISCV requires that timer interrupts be handled in machine mode and delegated as necessary. Also you can only reset the timer interrupt by writing to mtimecmp. Further, you must write a number > mtime, not just != mtime. This rather clumsy situation requires that we write some value into the future into mtimecmp lest we never be able to leave machine mode as the interrupt either is not cleared or instantly reoccurs. This current code is tested and works for harvey (Plan 9) timer interrupts. Change-Id: I8538d5fd8d80d9347773c638f5cbf0da18dc1cae Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17807 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-12-06riscv: Stub out sbi_(un)mask_interruptJonathan Neuschäfer
Linux needs these SBI calls, but so far it seems to work when they don't do anything. Change-Id: I2cd0bb3ab91e89805fed84ec87e4a48ce70c3a46 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17593 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-12-06arch/riscv/mcall.c: Return the correct memory base and sizeJonathan Neuschäfer
Change-Id: Ibf471787ccb4f5393b0af737a9f7fc47b853a41a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17594 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-20riscv: map first 4GiB of physical address spaceRonald G. Minnich
o The first 4G of physical address space is now mapped at 0. o The first 4G of physical address space is now mapped at 1 << 38. o The first 2G of DRAM (2 - 4 GiB of physical address space) is now mapped at the top of memory save for the last 4K i.e. at 0xffffffff80000000, with SBI page at the very top. Of these, we hope to remove the *most* of the last one once the gcc toolchain can handle linking programs that can run at "top 33 bits of address not all ones (but bit 63 set)". The 4K mapping of the top of the 64 bit address space will always remain, however, for SBI calls. Change-Id: I77b151720001bddad5563b0f8e1279abcea056fa Reviewed-on: https://review.coreboot.org/17403 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-14riscv: add a variable to control trap managementRonald G. Minnich
This variable can be set in a debugger (e.g. Spike) to finely control which traps go to coreboot and which go to the supervisor. Change-Id: I292264c15f002c41cf8d278354d8f4c0efbd0895 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17404 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-13riscv: change payload() to pass the config string pointer as arg0Ronald G. Minnich
The riscv 1.9 standard defines a textual config string to be passed to kernels and hypervisors. Change the payload function to pass this string in a0. Change-Id: I3be7f1712accf2d726704e4c970f22749d3c3f36 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17254 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-12riscv: start to use the configstring functionsRonald G. Minnich
These functions will allow us to remove hardcodes, as long as we can verify the qemu and lowrisc targets implement the configstring correctly. Hence, for the most part, we'll start with mainboard changes first. Define a new config variable, CONFIG_RISCV_CONFIGSTRING, which has a default value that works on all existing systems but which can be changed as needed for a new SOC or mainboard. Change-Id: I7dd3f553d3e61f1c49752fb04402b134fdfdf979 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17256 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-11-07riscv: Unify SBI call implementations under arch/riscv/Jonathan Neuschäfer
Note that currently, traps are only handled by the trap handler installed in the bootblock. The romstage and ramstage don't override it. TEST=Booted emulation/spike-qemu and lowrisc/nexys4ddr with a linux payload. It worked as much as before (Linux didn't boot, but it made some successful SBI calls) Change-Id: Icce96ab3f41ae0f34bd86e30f9ff17c30317854e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/17057 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-11-02riscv: Add a bandaid for the new toolchainRonald G. Minnich
After I did a new toolchain build, I found the the mhartid register value is wrong for Spike. The docs seem to agree with Spike, not the code the toolchain produces? Until such time as the bitstreams and toolchain can find a way to agree, just hardcode it. We've been playing this game for two years now so this is hardly a new approach. This is intentionally ugly because we really need the toolchains and emulators and bitstreams to sync up, and that's not happening yet. Lowrisc allegedly implements the v1.9 spec but it's PTEs are clearly 1.7. Once it all settles down we can just use constants supplied by the toolchain. I hope the syncup will have happened by the workshop in November. This gets spike running again. Change-Id: If259bcb6b6320ef01ed29a20ce3d2dcfd0bc7326 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17183 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-10-24RISCV: Clean up the common architectural codeRonald G. Minnich
This version of coreboot successfully starts a Harvey (Plan 9) kernel as a payload, entering main() with no supporting assembly code for startup. The Harvey port is not complete so it just panics but ... it gets started. We provide a standard payload function that takes a pointer argument and makes the jump from machine to supervisor mode; the days of kernels running in machine mode are over. We do some small tweaks to the virtual memory code. We temporarily disable two functions that won't work on some targets as register numbers changed between 1.7 and 1.9. Once lowrisc catches up we'll reenable them. We add the PAGETABLES to the memlayout.ld and use _pagetables in the virtual memory setup code. We now use the _stack and _estack from memlayout so we know where things are. As time goes on maybe we can kill all the magic numbers. Change-Id: I6caadfa9627fa35e31580492be01d4af908d31d9 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/17058 Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-10-18arch/riscv: In trap handler, don't print SP twiceJonathan Neuschäfer
The stack pointer (SP) is already printed in print_trap_information. Don't print it again in handle_misaligned_{load,store}. Change-Id: I156cf5734a16605decc2280e54e6db3089e094a2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16996 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-10-15arch/riscv: Visually align trap frame informationJonathan Neuschäfer
The pointers printed on unaligned memory accesses are now aligned to those printed at the end of print_trap_information. Change-Id: Ifec1cb639036ce61b81fe8d0a9b14c00d5b2781a Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16983 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-15riscv: Use the generic src/lib/bootblock.cJonathan Neuschäfer
TEST=Compiled for and ran on spike; it booted as before. Change-Id: Id173643a3571962406f9191db248b206235dca35 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16995 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-10-15arch/riscv: Remove unused bootblock_simple.cJonathan Neuschäfer
Change-Id: Id30463d1809d0a31c9d3825642dce66f3ab2750d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16986 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-10-15riscv: Clean up {qemu,spike}_utilJonathan Neuschäfer
spike_util.h: - (LOG_)REGBYTES and STORE are already defined in arch/riscv/include/bits.h. - TOHOST_CMD, FROMHOST_* are helper macros for the deprecated Host-Target Interface (HTIF). qemu_util.c: - mcall_query_memory now uses mprv_write_ulong instead of first translating the address and then accessing it normally. Thus, translate_address isn't used anymore. - Several functions used the deprecated HTIF CSRs mtohost/mfromhost. They have mostly been replaced by stub implementations. - htif_interrupt and testPrint were unused and have been deleted. spike_util.c: - translate_address and testPrint were unused and have been deleted. After this commit, spike_util.c and qemu_util.c are exactly the same and can be moved to a common location. Change-Id: I1789bad8bbab964c3f2f0480de8d97588c68ceaf Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16985 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-15riscv and power8: Convert printk/while(1) to dieJonathan Neuschäfer
Change-Id: I277cc9ae22cd33f2cd9ded808960349d09e8670d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16984 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-10-07RISCV: update the encoding.h file.Ronald G. Minnich
Change-Id: I8997e927d82363921a3ff17580b9a575acc1ce16 Signed-off-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-on: https://review.coreboot.org/16919 Tested-by: build bot (Jenkins) Reviewed-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net>
2016-09-12src/arch: Improve code formattingElyes HAOUAS
Change-Id: Ic1ca6c2e1cd06800d7eb2d00ac0b328987d022ef Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/16434 Tested-by: build bot (Jenkins) Reviewed-by: Omar Pakker
2016-08-29arch/riscv: Add missing "break;"Jonathan Neuschäfer
Change-Id: Iea3f12a5a7eb37586f5424db2d7a84c4319492f8 Reported-by: Coverity (1361947) Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16335 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23arch/riscv: Add functions to read/write memory on behalf of supervisor/user modeJonathan Neuschäfer
Normally machine-mode code operates completely within physical address space. When emulating less privileged memory accesses (e.g. when the hardware doesn't support unaligned read/write), it is useful to access memory through the MMU (and with virtual addresses); this patch implements this functionality using the MPRV bit. Change-Id: Ic3b3301f348769faf3ee3ef2a78935dfbcbd15fd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16260 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Map the kernel space into RAM (2GiB+)Jonathan Neuschäfer
Change-Id: I273e9d20e02f0333f28e0fc2adcc7940578ea93e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16263 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Implement the SBI againJonathan Neuschäfer
Not all SBI calls are implemented, but it's enough to see a couple dozen lines of Linux boot output. It should also be noted that the SBI is still in flux: https://groups.google.com/a/groups.riscv.org/forum/#!topic/sw-dev/6oNhlW0OFKM Change-Id: I80e4fe508336d6428ca7136bc388fbc3cda4f1e4 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16119 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Enable U-mode/S-mode counters (stime, etc.)Jonathan Neuschäfer
Change-Id: Ie62f60b2e237fa4921384e3894569ae29639f563 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16262 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Fix unaligned memory access emulationJonathan Neuschäfer
Change-Id: I06c6493355f25f3780f75e345c517b434912696f Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16261 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-23arch/riscv: Delegate exceptions to supervisor mode if appropriateJonathan Neuschäfer
Change-Id: I1c8127412af0f9acc5b5520dc324ac145e59a4bd Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16160 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-23arch/riscv: Print the page table structure after constructionJonathan Neuschäfer
A new Kconfig option, DEBUG_PRINT_PAGE_TABLES, is added to control this behaviour. It is currently only available on RISC-V, but other architectures can use it, too, should the need arise. Change-Id: I52a863d8bc814ab3ed3a1f141d0a77edc6e4044d Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16015 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-08-15arch/riscv: Improve and refactor trap handling diagnosticsJonathan Neuschäfer
Change-Id: I57032f958c88ea83a420e93b459df4f620799d84 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16016 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-15arch/riscv: Set the stack pointer upon trap entryJonathan Neuschäfer
Change-Id: I52fae62bc6cf775179963720fbcfaa9e07f6a717 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16017 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-11arch/riscv: Fix the page table setup codeJonathan Neuschäfer
In particular: - Fix the condition of the loop that fills the mid-level page table - Adhere to the format of sptbr Change-Id: I575093445edfdf5a8f54b0f8622ff0e89f77ccec Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16120 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-11arch/riscv: Update encoding.h and dependent filesJonathan Neuschäfer
I copied it from commit e10d2def7d of spike and made sure the copyright header is still there. Change-Id: Ie8b56cd2f4855b97d36a112a195866f4ff0feec5 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15832 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-08-04src/arch/riscv/id.S: Don't hardcode the stringsJonathan Neuschäfer
Change-Id: Ide87c45806c5e58775c77e7f780efb4cf81a70c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/16014 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-08-02arch/riscv: Add include/arch/barrier.hJonathan Neuschäfer
mb() is used in src/arch/riscv/ and src/mainboard/emulation/*-riscv/. It is currently provided by atomic.h, but I think it fits better into barrier.h. The "fence" instruction represents a full memory fence, as opposed to variants such as "fence r, rw" which represent a partial fence. An operating system might want to use precisely the right fence, but coreboot doesn't need this level of performance at the cost of simplicity. Change-Id: I8d33ef32ad31e8fda38f6a5183210e7bd6c65815 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15830 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Refactor bootblock.SJonathan Neuschäfer
A few things are currently missing: - The trap handler doesn't set the stack pointer, which can easily result in trap loops or memory corruptions. - The SBI trampolin page (as described in version 1.9 of the RISC-V Privileged Architecture Specification), has been removed for now. Change-Id: Id89c859fab354501c94a0e82d349349c29fa4cc6 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15591 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Only initialize virtual memory if it's availableJonathan Neuschäfer
And do the detection just before the initialization. Change-Id: I9a52430262f799baa298dc4f4ea459880abe250e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15831 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-28arch/riscv: Remove spinlock code from atomic.hJonathan Neuschäfer
These functions are not used anywhere. Change-Id: Ica1f4650e8774dd796be0aff00054f3698087816 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15829 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-19arch/riscv: Enable unaligned load handlingJonathan Neuschäfer
Change-Id: If1c63971335a6e2963e01352acfa4bd0c1d86bc2 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15590 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-07-18arch/riscv: Remove enter_supervisorJonathan Neuschäfer
This function is unused since coreboot starts payloads in machine mode, and it uses the obsolete eret instruction. Change-Id: I98d7d0de5a3959821c21a0ba4319efb610fdefde Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15729 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-18arch/riscv: Change all eret instructions to .word 0x30200073 (mret)Jonathan Neuschäfer
Using the opcode directly is necessary for the transition to the GCC 6.1.0 based toolchain, because the old toolchain only supports eret and the new toolchain only supports mret. Change-Id: I17e14d4793ae5259f7ce3ce0211cbb27305506cc Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15290 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-07-14spike-riscv: Look for the CBFS in RAMJonathan Neuschäfer
Change-Id: I98927a70adc45d9aca916bd985932b94287921de Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15285 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins)
2016-07-14arch/riscv: Unconditionally start payloads in machine modeJonathan Neuschäfer
Ron Minnich writes: "we'll change cbfstool to put a header on the payload to jump to supervisor if that is desired. The principal here is that payloads are always started in machine mode, but we want to set the page tables up for them." Change-Id: I5cbfc90afd3febab33835935f08005136a3f47e9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15510 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28riscv/bootblock.S: Register machine-mode, not supervisor-mode trap handlerJonathan Neuschäfer
Change-Id: Ic42d8490cc02a3907e2989435aab786f7c0f39c9 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15287 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28arch/riscv: Show fault PC and load address on load access faultsJonathan Neuschäfer
Change-Id: Ib0535bf25ce25550cc17f64177f804a70aa13fb3 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15286 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-28arch/riscv: Move _start to the beginning of the bootblockJonathan Neuschäfer
The different entry points (0x100, 0x140, ...), which were defined in the RISC-V Privileged Specification 1.7, aren't used anymore. Instead the Spike bootrom jumps at the start of our image, and traps are handled through mtvec. Change-Id: I865adec5e7a752a25bac93a45654ac06e27d5a8e Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15283 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-24region: Add writeat and eraseat supportAntonello Dettori
Implement writeat and eraseat support into the region_device_ops struct. Change-Id: Iac2cf32e523d2f19ee9e5feefe1fba8c68982f3d Signed-off-by: Antonello Dettori <dev@dettori.io> Reviewed-on: https://review.coreboot.org/15318 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-06-21riscv-spike: Move coreboot to 0x80000000 (2GiB)Jonathan Neuschäfer
This is where the RAM is (now), on RISC-V. We need to put coreboot.rom in RAM because Spike (at the moment) only supports loading code into the RAM, not into the boot ROM. Change-Id: I6c9b7cffe5fa414825491ee4ac0d2dad59a2d75c Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15149 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-06-12arch/riscv: Compile with -mcmodel=medanyJonathan Neuschäfer
In the default (medlow) code model, pointers are loaded with a lui, addi instruction sequence: lui a0, 0xNNNNN addi a0, a0, 0xNNN Since lui sign-extends bits 32-63 from bit 31 on RV64, lui/addi can't load pointers just above 0x80000000, where RISC-V's RAM now lives. The medany code model gets around this restriction by loading pointers trough auipc and addi: auipc a0, 0xNNNNN addi a0, a0, 0xNNN This way, any pointer within the current pc ±2G can be loaded, which is by far sufficient for coreboot. Change-Id: I77350d9218a687284c1337d987765553cf915a22 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15148 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-12arch/riscv: Add misc.c to bootblock/romstage to get udelay()Jonathan Neuschäfer
The uart8250mem driver needs it. Change-Id: I09e6a17cedf8a4045f008f5a0d225055d745e8db Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15147 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-06-12arch/riscv: copy read/write8/16/32 from x86Jonathan Neuschäfer
Change-Id: I12de8f82499074f0fbbc1c09210b00c6a9614c1b Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/15146 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-06-12arch/riscv/trap_util.S: Use "li" pseudo-instruction to load a constantJonathan Neuschäfer
Change-Id: I9759771fa6fc708d7d97509c5f5e0cefb8ab4c96 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/14962 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2016-05-03build system: remove CBFSTOOL_PRE1_OPTSPatrick Georgi
It isn't used anymore. Change-Id: Ie554d1dd87ae3f55547466e484c0864e55c9d102 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/14567 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2016-05-02lib/coreboot_table: use the architecture dependent table sizeAaron Durbin
Utilize the architecture dependent coreboot table size value from <arch/cbconfig.h> Change-Id: I80d51a5caf7c455b0b47c380e1d79cf522502a4c Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14455 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-05-02arch: introduce architecture dependent common variablesAaron Durbin
Stefan and others have discussed their interest in only including options in Kconfig that are directly associated with building a coreboot image. There are variables that are architecture dependent that are utilized in the coreboot infrastructure. To meet that goal, introduce <arch/cbconfig.h> header file which defines variables for the coreboot infrastructure that are architecture dependent but utilized in common infrastructure. Change-Id: Ic4cb9e81bab042797539dce004db0f7ee8526ea6 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14454 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-04-21lib: add common write_tables() implementationAaron Durbin
In order to de-duplicate common patterns implement one write_tables() function. The new write_tables() replaces all the architecture-specific ones that were largely copied. The callbacks are put in place to handle any per-architecture requirements. Change-Id: Id3d7abdce5b30f5557ccfe1dacff3c58c59f5e2b Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14436 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/coreboot_table: add architecture hooks for adding tablesAaron Durbin
Add a architecture specific function, arch_write_tables(), that allows an architecture to add its required tables for booting. This callback helps write_tables() to be de-duplicated. Change-Id: I805c2f166b1e75942ad28b6e7e1982d64d2d5498 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14435 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-04-21lib/bootmem: allow architecture specific bootmem rangesAaron Durbin
A architecture-specific function, named bootmem_arch_add_ranges(), is added so that each architecture can add entries into the bootmem memory map. This allows for a common write_tables() implementation to avoid code duplication. Change-Id: I834c82eae212869cad8bb02c7abcd9254d120735 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/14434 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-30 20:33:22 +0000