Age | Commit message (Collapse) | Author |
|
On recent Intel ChromeOS devices, although S3 is still supported, only
S0ix is used on user devices, so we don't care about optimising S3
resume time. Disabing the stage cache saves boot time at the cost of
increasing the S3 resume time. E.g. on nissa this reduces boot time by
6 ms and increases S3 resume time by 89 ms.
BUG=b:247940538, b:192032803
TEST=Build and boot on nissa with MAINBOARD_DISABLE_STAGE_CACHE
selected.
Change-Id: I243a401a112a12bb824c5447a8fecc99500f7739
Signed-off-by: Reka Norman <rekanorman@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
The coreboot build system automatically adds a `config` file to CBFS
that lists the exact Kconfig configuration that this image was built
with. This is useful to reproduce a build after the fact or to check
whether support for a specific feature is enabled in the image.
However, the file is currently generated using the `savedefconfig`
command to Kconfig, which generates the minimal .config file that is
needed to produce the required config in a coreboot build. This is fine
for reproduction, but bad when you want to check if a certain config was
enabled, since many configs get enabled by default or pulled in through
another config's `select` statement and thus don't show up in the
defconfig.
This patch tries to fix that second use case by instead including the
full .config instead. In order to save some space, we can remove all
comments (e.g. `# CONFIG_XXX is not set`) from the file, which still
makes it easy to test for a specific config (if it's in the file you can
extract the right value, if not you can assume it was set to `n`). We
can also LZMA compress it since this file is never read by firmware
itself and only intended for later re-extraction via cbfstool, which
always has LZMA support included.
On a sample Trogdor device the existing (uncompressed) `config` file
takes up 519 bytes in CBFS, whereas the new (compressed) file after this
patch will take up 1832 bytes -- still a small amount that should
hopefully not break the bank for anyone.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I5259ec6f932cdc5780b8843f46dd476da9d19728
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69710
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
This disables MP table generation for the affected boards
since interrupt routing entries would now be completely missing.
The mechanism itself is flawed and redundant. The mapping
of integrated PCI devices' INTx pins to IOAPIC pins is
dependent of configuration registers and needs not appear
in the devicetree.cb files at all.
The write_smp_table implementation would skip writing
any entry delivering to destination IOAPIC ID 0. This
does not follow MP table specification.
There were duplicate calls to register_new_ioapic_gsi0(),
with another present under southbridge LPC device.
Change-Id: I383d55ba2bc0800423617215e0bfdfad5136e9ac
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69488
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Now that all platforms use parallel_mp this is the only codepath used
for cpu_info() local thread storage.
Change-Id: I119214e703aea8a4fe93f83b784159cf86d859d3
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69122
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
On the intel/glkrvp
compressed:
- romstage: 29659
- verstage: 31303
non compressed:
- romstage: 46244
- verstage: 47012
On qemu (with some additional patch to not run XIP)
compressed:
- romstage: 11203
non compressed:
- romstage: 13924
Even with a small romstage the size improvements are substantial,
which should result in a speedup when loading the stage. On the
up/squared loading romstage is sped up by 9ms.
TESTED: successfully boot the up/squared & google/vilboz.
Change-Id: I6906c8b6df45f2433d92d2ff1d1748cc4926c73a
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67749
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
The tool "include-what-you-use" analyzes each file's headers and makes
recommendations for header files to add and remove. There are
additional scripts as part of the package that will make these changes
directly based on the recommendations, but due to the way coreboot
compiles code in/out base on Kconfig options, this isn't really safe for
the project to use.
It is a good starting point though.
To use, set the IWYU kconfig option, then build with the command:
make -k
Because this doesn't actually build any files, the -k option is needed
or make will stop after looking at the first file.
Signed-off-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Change-Id: I084813f21a3c26cac1e4e134bf8a83eb8637ff63
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67915
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This reverts commit 6317aff5b3028ad44b7885b6b63263c55b5aadb3.
Reason for revert: fix broken tot master
Change-Id: Ie8075cf6c80448bfc957a1e1183f0283d2011b1b
Signed-off-by: Martin Roth <gaumless@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67287
Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On the intel/glkrvp
compressed:
- romstage: 29659
- verstage: 31303
non compressed:
- romstage: 46244
- verstage: 47012
On qemu (with some additional patch to not run XIP)
compressed:
- romstage: 11203
non compressed:
- romstage: 13924
Even with a small romstage the size improvements are substantial,
which should result in a speedup when loading the stage. On the
up/squared loading romstage is sped up by 9ms.
TESTED: successfully boot the up/squared & google/vilboz.
Change-Id: Iac24d243c4bd4cb8c1db14a8e9fc43f508c2cd5d
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36613
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Firmware is typically delivered as one large binary image that gets
flashed. Since this final image consists of binaries and data from
a vast number of different people and companies, it's hard to
determine what all the small parts included in it are. The goal of
the software bill of materials (SBOM) is to take a firmware image
and make it easy to find out what it consists of and where those
pieces came from. Basically, this answers the question, who supplied
the code that's running on my system right now? For example, buyers
of a system can use an SBOM to perform an automated vulnerability
check or license analysis, both of which can be used to evaluate
risk in a product. Furthermore, one can quickly check to see if the
firmware is subject to a new vulnerability included in one of the
software parts (with the specified version) of the firmware.
Further reference:
https://web.archive.org/web/20220310104905/https://blogs.gnome.org/hughsie/2022/03/10/firmware-software-bill-of-materials/
- Add Makefile.inc to generate and build coswid tags
- Add templates for most payloads, coreboot, intel-microcode,
amd-microcode. intel FSP-S/M/T, EC, BIOS_ACM, SINIT_ACM,
intel ME and compiler (gcc,clang,other)
- Add Kconfig entries to optionally supply a path to CoSWID tags
instead of using the default CoSWID tags
- Add CBFS entry called SBOM to each build via Makefile.inc
- Add goswid utility tool to generate SBOM data
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com>
Change-Id: Icb7481d4903f95d200eddbfed7728fbec51819d0
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63639
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
|
|
The previous two patches removed all of the soc/Kconfig files, so there
is nothing to include anymore. Get rid of the 'source' command that
includes them.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I95067c4702ef25a8a6db4d480c089f06986ce9b8
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65329
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Most of the src/soc/Kconfig files are only there for AMD and Intel to
load the main SoC Kconfig files before any common files. That can be
done in src/Kconfig instead. Moving the loads to the lower level allows
the removal of all but the Intel soc/Kconfig file, which can be removed
in a follow-on patch.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I5061191fe23e0b7c745e90874bd7b390806bbcfa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/65327
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ibba8558dd1825a864b427097aff8552933cc6fc3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64751
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Felix Singer <felixsinger@posteo.net>
|
|
This adds 2 flags:
* invisible opt-in flag for platforms on which clang seems to work
* visible opt-in flag to allow experimenting
Clang seems to work rather well on x86_32 so it makes sense to start
adding that to Jenkins buildtesting, which this allows.
This allows abuild to differentiate between targets that are known to
build with clang. This makes buildtesting just those targets easier.
Change-Id: I46f1bad59bda94f60f4a141237ede11f6eb93cc2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63081
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
|
|
Currently the BSP stack overflows into the next AP stack. This symbols
needs to be a power of 2 for alignment on the legacy smp init codepath.
This fixes cpu_info on AP #1 build being broken due to stack overflow.
Change-Id: Ib59d354beabc8877f09f768004ced22234ec7d72
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/64610
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@tutanota.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
-fsanitize=kernel-address is not implemented in clang
Change-Id: Ib8660bf99b940ff9eac7461f5946df0891dd3a4f
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63064
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Some targets don't need this as the bootblock is loaded differently.
Change-Id: Ia42448f7e9dd0635c72857fbc1fab54508932721
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63377
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
This is a property of a platform and should not be exposed to the
user.
Change-Id: I34f9097d40b2bf732cecf30bf13ba5a413dd53a5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/63676
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Ib31defde0d4983a9418f05e0b812a7bbbe4fe2b7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/62057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Show the DEBUG_FUNC option if COSOLE_OVERRIDE_LOGLEVEL is set, or it
will never be available for some mainboards.
This was missed in commit cf3dcd6d2975673622c3272e0d7f3e421051fe74
Change-Id: Id2ef287fb39989007f28fc6475209eda0a63c792
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/59196
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
|
|
Read fw_config value from VPD.
This new option can be used where chrome EC is not supported like
pre-silicon platform and fw_config can be updated by VPD tool in OS.
TEST= boot to OS and read fw_config from vpd
1. Boot to OS
2. Write "fw_config" in VPD
ex) vpd -i "RW_VPD" -s "fw_config"="1"
3. reboot and check fw_config value from coreboot log
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I4df7d5612e18957416a40ab854fa63c8b11b4216
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58839
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Request fw_config values from various sources (as enabled via Kconfig)
until a valid value has been read.
With this change, Chrome EC CBI takes precedence over CBFS fw_config.
TEST=select both configs and check fallback behavior.
1. select both FW_CONFIG_SOURCE_CHROMEEC_CBI and FW_CONFIG_SOURCE_CBFS
2. check log for reading fw_config from CBI and CBFS
Signed-off-by: Wonkyu Kim <wonkyu.kim@intel.com>
Change-Id: I215c13a4fcb9dc3b94f73c770e704d4e353e9cff
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58833
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
This reduces the number of selects required in the SOC_SPECIFIC_OPTIONS.
BUG=b:179699789
TEST=Build guybrush
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I7f1364fc269ea5ec17982bf750a164a3290adb0e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/58860
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Introduce the `smbios_dev_info` devicetree keyword to specify the
instance ID and RefDes (Reference Designation) of onboard devices.
Example syntax:
device pci 1c.0 on # PCIe Port #1
device pci 00.0 on
smbios_dev_info 6
end
end
device pci 1c.1 on # PCIe Port #2
device pci 00.0 on
smbios_dev_info 42 "PCIe-PCI Time Machine"
end
end
The `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` Kconfig option enables using
this syntax to control the generated Type 41 entries. When this option
is enabled, Type 41 entries are only autogenerated for devices with a
defined instance ID. This avoids having to keep track of which instance
IDs have been used for every device class.
Using `smbios_dev_info` when `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` is not
enabled will result in a build-time error, as the syntax is meaningless
in this case. This is done with preprocessor guards around the Type 41
members in `struct device` and the code which uses the guarded members.
Although the preprocessor usage isn't particularly elegant, adjusting
the devicetree syntax and/or grammar depending on a Kconfig option is
probably even worse.
Change-Id: Iecca9ada6ee1000674cb5dd7afd5c309d8e1a64b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57370
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
For coreboot proper, I/O APIC programming is not really required,
except for the APIC ID field. We generally do not guard the related
set_ioapic_id() or setup_ioapic() calls with CONFIG(IOAPIC).
In practice it's something one cannot leave unselected, but maintain
the Kconfig for the time being.
Change-Id: I6e83efafcf6e81d1dfd433fab1e89024d984cc1f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/55291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
CPU_INFO_V2 changes the behavior of cpu_info(). There is now only 1
cpu_info struct per cpu. This means that we no longer need to allocate
it at the top of each threads stack.
We can now in theory remove the CONFIG_STACK_SIZE alignment on the
thread stack sizes. We can also in theory use threads in SMM if you are
feeling venturesome.
BUG=b:194391185, b:179699789
TEST=Perform reboot stress test on guybrush with COOP_MULTITASKING
enabled.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Change-Id: I5e04d254a00db43714ec60ebed7c4aa90e23190a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57628
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Peers <epeers@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
It avoids the dependency on bison/flex, minimally speeds up the build
and also works around weird race conditions in some versions of bison
that need more investigation.
The issue this avoids manifests as a build error when creating
parser.tab.c:
input in flex scanner failed
make: *** [util/kconfig/Makefile.inc:66: build/util/kconfig/parser.tab.c] Error 2
Since the error happens within bison the alternative would be to make
bison part of our crossgcc environment to ensure that no broken OS
build is used.
BUG=b:197515860
TEST=things build with bison not installed
Change-Id: Ib35dfb7beafc0a09dc333e962b1e3f33df46a854
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/57409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
|
|
Some mainboards need a mainboard-specific mechanism to access option
values. Allow mainboards to implement the option API. Also, add some
documentation about the current option API, and describe when should
one reimplement the option API in mainboard code: only when the code
is mainboard-specific to comply with externally-imposed constraints.
Change-Id: Idccdb9a008b1ebb89821961659f27b1c0b17d29c
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54729
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
In order to add more option backends, transform the current CMOS option
backend into a Kconfig choice. Replace the `select` directives, as they
cannot be used with choice options.
Change-Id: Id3180e9991f0e763b4bae93a92d40668e7fc99bc
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54728
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
Mainboards with variants may not always use the same cmos.layout file.
Turn the hardcoded path into a Kconfig symbol to allow changing it.
Tested with BUILD_TIMELESS=1: Without including the config file in the
coreboot.rom and with `USE_OPTION_TABLE` selected, building for the Asus
P8H61-M PRO produces an identical coreboot image.
Change-Id: I4cc622dcb70855c06cb8a816c34406f8421180df
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/54366
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
IPMI debug was extra spewy, so add a debug option as SPI and
other drivers have when they need to be debugged.
Change-Id: I788d67c242cac23bde9750aa3e95e3276c3f1fd7
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/52449
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icaa64e664499090fec3e98687b4827ef27cc201b
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/50800
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
These accessors can be reused for several other northbridges.
Tested with BUILD_TIMELESS=1, Roda RK9 remains identical.
Change-Id: Ia16ccc63dddebf938f4e9a7f5518e4d25d3e7e66
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/49748
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Show console debug options that would only be available if console
SPEW was selected when the override loglevel option is selected.
Change-Id: I2fb22562688d6b0bc9235c9ebe5d427dc2a67767
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/48249
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
|
|
Looks like the option is generally not compatible with
garbage collections.
Nothing gets inlined, for example is_smp_boot() no longer
evaluates to constant false and thus the symbols from
secondary.S would need to be present for the build to pass
even if we set SMP=n.
Also the addresses of relocatable ramstage are currently
not normalised on the logs, so util/genprof would be unable
dress those.
Change-Id: I0b6f310e15e6f4992cd054d288903fea8390e5cf
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45757
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Move the macros for printing debug information to debug.h in the
common console include directory and device include file.
These are available if the platform selects DEFAULT_CONSOLE_LOGLEVEL_8.
The macros could be used by any platform.
Change-Id: Ie237bdf8cdc42c76f38a0c820fdc92e81095f47c
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46093
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Add general debug macros that print resource information.
These are available to select if DEFAULT_CONSOLE_LOGLEVEL_8.
The macros are helpful in debugging complex resource allocation
with multiple buses. The macros are moved from soc/intel/xeon_sp,
where they were originally developed.
Change-Id: I2bdab7770ca5ee5901f17a8af3a9a1001b6702e4
Signed-off-by: Marc Jones <marcjones@sysproconsulting.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/46304
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jay Talbott <JayTalbott@sysproconsulting.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The USB4 retimer device needs to declare a _DSM with specific functions
that allow for GPIO control to turn off the power when an external
device is not connected. This driver allows the mainboard to provide
the GPIO that is connected to the power control.
BUG=b:156957424
Change-Id: Icfb85dc3c0885d828aba3855a66109043250ab86
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44918
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To avoid confusion with `flashconsole` (CONSOLE_SPI_FLASH), prefix this
option with `EM100Pro`. Looks like it is not build-tested, however.
Change-Id: I4868fa52250fbbf43e328dfd12e0e48fc58c4234
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45973
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
This change extends the devicetree override one more layer and allows
the chipset to provide the base devicetree. This allows the chipset to
assign alias names to devices as well as set default register values.
This works for both the baseboard devicetree.cb as well as variant
overridetree.cb.
chipset.cb:
device pci 15.0 alias i2c0 off end
devicetree.cb:
device ref i2c0 on end
BUG=b:156957424
Change-Id: Ia7500a62f6211243b519424ef3834b9e7615e2fd
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44037
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: If8aa28a22625b7b2cf9b58958de87ee752f637f6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/45247
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
|
|
Instead of enabling ASAN_IN_ROMSTAGE from Kconfig file in a
platform's dedicated directory, let's introduce a new config
option HAVE_ASAN_IN_ROMSTAGE to denote if a given platform
supports ASan in romstage.
Similary, use HAVE_ASAN_IN_RAMSTAGE to indicate
if a given platform supports ASan in ramstage. Consequently, we
no longer have to make ASan x86 specific.
Change-Id: I36b144305465052718f245cacf61d3ca44dfb4b4
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/44258
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
This patch adds ASan support to romstage on x86 architecture.
A Kconfig option is added to enable ASan in romstage. Compiler
flags are updated. A memory space representing the shadow region
is reserved in linker section. And a function call to asan_init()
is added to initialize shadow region when romstage loads.
Change-Id: I67ebfb5e8d602e865b1f5c874860861ae4e54381
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
An additional compiler flag is added to make use of the shadow
offset callback feature we introduced in our GCC patch. Also,
a comment is added to tell user that this GCC patch needs to be
applied in order to use ASan.
Change-Id: Ia187e4991bf808f4ae137eff0ffdb9baea0085e9
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Add a Kconfig option to enable address sanitizer on x86 architecture.
Create ASan dummy functions. And add relevant gcc flags to compile
ramstage with ASan.
Change-Id: I6d87e48b6786f02dd46ea74e702f294082fd8891
Signed-off-by: Harshit Sharma <harshitsharmajs@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42271
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
We always have it, no need to support opting-out.
For PLATFORM_HAS_DRAM_CLEAR there is a dependency of ramstage
located inside CBMEM, which is only true with ARCH_X86.
Change-Id: I5cbf4063c69571db92de2d321c14d30c272e8098
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/43014
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add closing quotation mark to fix Kconfig warning.
Change-Id: I75e8d23b81266553d7c40de7f52c6c03107c43de
Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42748
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
This patch adds a separate blobs repository for Qualcomm blobs,
analogous to the existing AMD blobs. Qualcomm's binary licenses allow
files to be redistributed and used by anyone, but they explicitly
require the user to agree to the license terms when just *downloading*
the binary (even if they're not using them to build any firmware). Some
community members do not like to have to agree to licenses for files
they're not actually using, so we are keeping these files separate from
the main blobs repository and adding an extra Kconfig to make sure the
user is aware of and must explicitly agree to this before downloading
these files.
Signed-off-by: Julius Werner <jwerner@chromium.org>
Change-Id: I247746c1b633343064c9f32ef1556000475d6c4a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42548
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
variable
If VPD_SMBIOS_VERSION is selected, it would read VPD_RO variable that can
override SMBIOS type 0 version.
One special scenario of using this feature is to assign a BIOS version to
a coreboot image without the need to rebuild from source.
VPD_SMBIOS_VERSION default is n.
Tested=On OCP Delta Lake, dmidecode -t 0 can see the version being updated
from VPD.
Change-Id: Iee62ed900095001ffac225fc629b3f2f52045e30
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42029
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: insomniac <insomniac@slackware.it>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Kconfig 4.17 started using the $(..) syntax for environment variable
expansion while we want to keep expansion to the build system.
Older Kconfig versions (like ours) simply drop the escapes, not
changing the behavior.
While we could let Kconfig expand some of the variables, that only
splits the handling in two places, making debugging harder and
potentially messing with reproducible builds (e.g. when paths end up
in configs), so escape them all.
Change-Id: Ibc4087fdd76089352bd8dd0edb1351ec79ea4faa
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42481
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
|
|
Change-Id: I191ad709fd3c6f906cd34b0053eeaebdb80d410d
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This change defines a Kconfig variable MEMLAYOUT_LD_FILE which allows
SoC/mainboard to provide a linker file for the platform. x86 already
provides a default memlayout.ld under src/arch/x86. With this new
Kconfig variable, it is possible for the SoC/mainboard code for x86 to
provide a custom linker file as well.
Makefile.inc is updated for all architectures to use this new Kconfig
variable instead of assuming memlayout.ld files under a certain
path. All non-x86 boards used memlayout.ld under mainboard
directory. However, a lot of these boards were simply including the
memlayout from SoC. So, this change also updates these mainboards and
SoCs to define the Kconfig as required.
BUG=b:155322763
TEST=Verified that abuild with --timeless option results in the same
coreboot.rom image for all boards.
Change-Id: I6a7f96643ed0519c93967ea2c3bcd881a5d6a4d6
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42292
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Also remove default mb/*/fadt.c from Makefiles.
Change-Id: I6a2839c524f8311ec9a382a84066afc7d579eaca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41948
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This gets rid of the magic numbers in Kconfig.
Change-Id: Ibee033b6c99e3131bb323f0d86d306dcd82f9b45
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/42139
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
This change introduces a new top-level interface for interacting with a
bitmask providing firmware configuration information.
This is motivated by Chromebook mainboards that need to support multiple
different configurations at runtime with the same BIOS. In these
devices the Embedded Controller provides a bitmask that can be broken
down into different fields and each field can then be broken down into
different options.
The firmware configuration value could also be stored in CBFS and this
interface will look in CBFS first to allow the Embedded Controller value
to be overridden.
The firmware configuration interface is intended to easily integrate
into devicetree.cb and lead to less code duplication for new mainboards
that make use of this feature.
BUG=b:147462631
TEST=this provides a new interface that is tested in subsequent commits
Change-Id: I1e889c235a81545e2ec0e3a34dfa750ac828a330
Signed-off-by: Duncan Laurie <dlaurie@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41209
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Change-Id: I8a207e30a73d10fe67c0474ff11324ae99e2cec6
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41360
Reviewed-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Stefan thinks they don't add value.
Command used:
sed -i -e '/file is part of /d' $(git grep "file is part of " |egrep ":( */\*.*\*/\$|#|;#|-- | *\* )" | cut -d: -f1 |grep -v crossgcc |grep -v gcov | grep -v /elf.h |grep -v nvramtool)
The exceptions are for:
- crossgcc (patch file)
- gcov (imported from gcc)
- elf.h (imported from GNU's libc)
- nvramtool (more complicated header)
The removed lines are:
- fmt.Fprintln(f, "/* This file is part of the coreboot project. */")
-# This file is part of a set of unofficial pre-commit hooks available
-/* This file is part of coreboot */
-# This file is part of msrtool.
-/* This file is part of msrtool. */
- * This file is part of ncurses, designed to be appended after curses.h.in
-/* This file is part of pgtblgen. */
- * This file is part of the coreboot project.
- /* This file is part of the coreboot project. */
-# This file is part of the coreboot project.
-# This file is part of the coreboot project.
-## This file is part of the coreboot project.
--- This file is part of the coreboot project.
-/* This file is part of the coreboot project */
-/* This file is part of the coreboot project. */
-;## This file is part of the coreboot project.
-# This file is part of the coreboot project. It originated in the
- * This file is part of the coreinfo project.
-## This file is part of the coreinfo project.
- * This file is part of the depthcharge project.
-/* This file is part of the depthcharge project. */
-/* This file is part of the ectool project. */
- * This file is part of the GNU C Library.
- * This file is part of the libpayload project.
-## This file is part of the libpayload project.
-/* This file is part of the Linux kernel. */
-## This file is part of the superiotool project.
-/* This file is part of the superiotool project */
-/* This file is part of uio_usbdebug */
Change-Id: I82d872b3b337388c93d5f5bf704e9ee9e53ab3a9
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41194
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Used commands:
perl -i -p0e 's|\/\*[\s*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-only */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*]*free[\s*]*software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*either[\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License,[\s*]*or[\s*]*.at[\s*]*your[\s*]*option.[\s*]*any[\s*]*later[\s*]*version.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-2.0-or-later */|' $(cat filelist)
perl -i -p0e 's|\/\*[\s*]*.*is[\s*#]*free[\s*#]*software[;:,][\s*#]*you[\s*#]*can[\s*#]*redistribute[\s*#]*it[\s*#]*and/or[\s*#]*modify[\s*#]*it[\s*#]*under[\s*#]*the[\s*#]*terms[\s*#]*of[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*as[\s*#]*published[\s*#]*by[\s*#]*the[\s*#]*Free[\s*#]*Software[\s*#]*Foundation[;:,][\s*#]*either[\s*#]*version[\s*#]*3[\s*#]*of[\s*#]*the[\s*#]*License[;:,][\s*#]*or[\s*#]*.at[\s*#]*your[\s*#]*option.[\s*#]*any[\s*#]*later[\s*#]*version.[\s*#]*This[\s*#]*program[\s*#]*is[\s*#]*distributed[\s*#]*in[\s*#]*the[\s*#]*hope[\s*#]*that[\s*#]*it[\s*#]*will[\s*#]*be[\s*#]*useful[;:,][\s*#]*but[\s*#]*WITHOUT[\s*#]*ANY[\s*#]*WARRANTY[;:,][\s*#]*without[\s*#]*even[\s*#]*the[\s*#]*implied[\s*#]*warranty[\s*#]*of[\s*#]*MERCHANTABILITY[\s*#]*or[\s*#]*FITNESS[\s*#]*FOR[\s*#]*A[\s*#]*PARTICULAR[\s*#]*PURPOSE.[\s*#]*See[\s*#]*the[\s*#]*GNU[\s*#]*General[\s*#]*Public[\s*#]*License[\s*#]*for[\s*#]*more[\s*#]*details.[\s*]*\*\/|/* SPDX-License-Identifier: GPL-3.0-or-later */|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w]*.*is free software[:;][\#\s]*you[\#\s]*can[\#\s]*redistribute[\#\s]*it[\#\s]*and\/or[\#\s]*modify[\#\s]*it[\s\#]*under[\s \#]*the[\s\#]*terms[\s\#]*of[\s\#]*the[\s\#]*GNU[\s\#]*General[\s\#]*Public[\s\#]*License[\s\#]*as[\s\#]*published[\s\#]*by[\s\#]*the[\s\#]*Free[\s\#]*Software[\s\#]*Foundation[;,][\s\#]*version[\s\#]*2[\s\#]*of[\s\#]*the[\s\#]*License.*[\s\#]*This[\s\#]*program[\s\#]*is[\s\#]*distributed[\s\#]*in[\s\#]*the[\s\#]*hope[\s\#]*that[\s\#]*it[\s\#]*will[\#\s]*be[\#\s]*useful,[\#\s]*but[\#\s]*WITHOUT[\#\s]*ANY[\#\s]*WARRANTY;[\#\s]*without[\#\s]*even[\#\s]*the[\#\s]*implied[\#\s]*warranty[\#\s]*of[\#\s]*MERCHANTABILITY[\#\s]*or[\#\s]*FITNESS[\#\s]*FOR[\#\s]*A[\#\s]*PARTICULAR[\#\s]*PURPOSE.[\#\s]*See[\#\s]*the[\#\s]*GNU[\#\s]*General[\#\s]*Public[\#\s]*License[\#\s]*for[\#\s]*more[\#\s]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
perl -i -p0e 's|(\#\#*)[\w*]*.*is free software[:;][\s*]*you[\s*]*can[\s*]*redistribute[\s*]*it[\s*]*and\/or[\s*]*modify[\s*]*it[\s*]*under[\s*]*the[\s*]*terms[\s*]*of[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*as[\s*]*published[\s*]*by[\s*]*the[\s*]*Free[\s*]*Software[\s*]*Foundation[;,][\s*]*version[\s*]*2[\s*]*of[\s*]*the[\s*]*License.[\s*]*This[\s*]*program[\s*]*is[\s*]*distributed[\s*]*in[\s*]*the[\s*]*hope[\s*]*that[\s*]*it[\s*]*will[\s*]*be[\s*]*useful,[\s*]*but[\s*]*WITHOUT[\s*]*ANY[\s*]*WARRANTY;[\s*]*without[\s*]*even[\s*]*the[\s*]*implied[\s*]*warranty[\s*]*of[\s*]*MERCHANTABILITY[\s*]*or[\s*]*FITNESS[\s*]*FOR[\s*]*A[\s*]*PARTICULAR[\s*]*PURPOSE.[\s*]*See[\s*]*the[\s*]*GNU[\s*]*General[\s*]*Public[\s*]*License[\s*]*for[\s*]*more[\s*]*details.\s(#* *\n)*|\1 SPDX-License-Identifier: GPL-2.0-only\n\n|' $(cat filelist)
Change-Id: Ia01908544f4b92a2e06ea621eca548e582728280
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/41178
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In order to the Kconfigs in the same directory where the corresponding
code lives, this change moves ACPI_BERT to arch/x86/Kconfig and
following configs to acpi/Kconfig:
ACPI_CPU_STRING
ACPI_HAVE_PCAT_8259
ACPI_NO_PCAT_8259
HAVE_ACPI_TABLES
BUG=b:155428745
Change-Id: I289565f38e46bd106ff89685aaf8f57e53d9827a
Signed-off-by: Furquan Shaikh <furquan@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/40932
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To provide sane defaults for most of the user base, this patch switches
on the USE_BLOBS option by default. Since it only changes the default,
this behaviour can still be easily disabled.
With this abuild doesn't have to select USE_BLOBS any more, so what
abuild tests becomes the coreboot default again.
Change-Id: Ia0632b9ae7a1f212a8640b3faec2695d17d238c5
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37972
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
They're listed in AUTHORS and often incorrect anyway, for example:
- What's a "Copyright $year-present"?
- Which incarnation of Google (Inc, LLC, ...) is the current
copyright holder?
- People sometimes have their editor auto-add themselves to files even
though they only deleted stuff
- Or they let the editor automatically update the copyright year,
because why not?
- Who is the copyright holder "The coreboot project Authors"?
- Or "Generated Code"?
Sidestep all these issues by simply not putting these notices in
individual files, let's list all copyright holders in AUTHORS instead
and use the git history to deal with the rest.
Change-Id: I89b10076e0f4a4b3acd59160fb7abe349b228321
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/39611
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no reason to hide the GDB_STUB option when CONSOLE_SERIAL is
not set.
Change-Id: Icbf9a1ac0e617939cafa3d66774bbd467dc01cbc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36604
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I1d36e554618498d70f33f6c425b0abc91d4fb952
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38928
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Peter Lemenkov <lemenkov@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Make sure MINIMAL_PCI_SCANNING has right dependency over PCI kconfig
symbol.
Change-Id: I30b18345976e5d21ccedf8906985ff71e7d2815c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38801
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Reviewed-by: Martin Roth <martinroth@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch guards CONFIGURABLE_RAMSTAGE symbol (which is default
enable for all x86 systems) with another Kconfig that can be selected
by platform that actually planning to use it.
TEST=CONFIG_CONFIGURABLE_RAMSTAGE is not enabled by default.
Change-Id: I2113445d507294df59fbc7fb1373793b47c6c31c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38795
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This CL has changes that allow us to enable a configurable
ramstage, and one change that allows us to minimize PCI
scanning. Minimal scanning is a frequently requested feature.
To enable it, we add two new variables to src/Kconfig
CONFIGURABLE_RAMSTAGE
is the overall variable controlling other options for minimizing the
ramstage.
MINIMAL_PCI_SCANNING is how we indicate we wish to enable minimal
PCI scanning.
Some devices must be scanned in all cases, such as 0:0.0.
To indicate which devices we must scan, we add a new mandatory
keyword to sconfig
It is used in place of on, off, or hidden, and indicates
a device is enabled and mandatory. Mandatory
devices are always scanned. When MINIMAL_PCI_SCANNING is enabled,
ONLY mandatory devices are scanned.
We further add support in src/device/pci_device.c to manage
both MINIMAL_PCI_SCANNING and mandatory devices.
Finally, to show how this works in practice, we add mandatory
keywords to 3 devices on the qemu-q35.
TEST=
1. This is tested and working on the qemu-q35 target.
2. On CML-Hatch
Before CL:
Total Boot time: ~685ms
After CL:
Total Boot time: ~615ms
Change-Id: I2073d9f8e9297c2b02530821ebb634ea2a5c758e
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36221
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jeremy Soller <jeremy@system76.com>
|
|
The use of ENABLE_APIC_EXT_ID removed with commit: de56a66e
Change-Id: I24c07c9a4813ceba48082ca2c564266435e58a18
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38575
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Some boards don't support S3 or S4. The S4 state can't be removed from
the available sleep states.
Add a config item that allows removal of the S4 state from the list of
available sleep states. The S4 state can be removed by selecting the
item on board level.
For the AMD chipsets the SSFG mask is updated to remove the S4 state.
BUG=N/A
TEST=build
Change-Id: Id802c4cc40308ddf39e99e7f226d55e0e020f0c9
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38431
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
As logging is guarded by Kconfig, increase the level from BIOS_SPEW
to BIOS_INFO.
The original callsite inside timestamp_add_table_entry() was also
called when syncing from timestamps from .bss to CBMEM. We should
not reprint the values then.
Change-Id: I72ca4b6a04d8734c141a04e651fc8c23932b1f23
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/38300
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I968c4392849045cd50bfe2c83de44daba38ee245
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37336
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
It was possible to have NO_STAGE_CACHE=n and at the same time have
TSEG_STAGE_CACHE=n and CBMEM_STAGE_CACHE=n. This resulted with a
failing attempt to load STAGE_POSTCAR from the stage cache, but not
loading it from CBFS either.
Make it a three-way choice between different STAGE_CACHE options.
For AGESA disable CBMEM_STAGE_CACHE by default, as it is no longer
needed to have functional ACPI S3 resume and it is not allowed
se use keyword select for symbols inside choice blocks.
Change-Id: I0da3e1cf4c92817ffabbb02eda3476ecdfdfa278
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37683
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
It's not selected anywhere anymore. Drop it and set the default for
RELOCATABLE_RAMSTAGE directly.
Change-Id: I580e89525ece39418afeefd6a9d0b89b370ca95f
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37577
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The romcc bootblock will be deprecated soon and most platforms use
C_ENVIRONMENT_BOOTBLOCK already. This patch drops the
CONFIG_C_ENVIRONMENT_BOOTBLOCK symbol and adds CONFIG_ROMCC_BOOTBLOCK
where needed.
Change-Id: I773a76aade623303b7cd95ebe9b0411e5a7ecbaf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This was only used with amdfam10h-15h, where cache
coherency between nodes was supposed to be guaranteed
with this code. We could want a cleaner and more generic
approach for this, possibly utilising .data sections.
Change-Id: I00da5c2b0570c26f2e3bb464274485cc2c08c8f0
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34929
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The eltan security items ended up in the chipset menu which is not
desired. Now the eltan security option (when enabled in mainboard) shows
up in the security menu.
BUG=N/A
TEST=build
Change-Id: I3b2aa3836e8d9a3242c6d1f3ba7b7821a5cfb9d3
Signed-off-by: Wim Vervoorn <wvervoorn@eltan.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36851
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Frans Hendriks <fhendriks@eltan.com>
|
|
In the vast majority of cases the bootdevice is the bottleneck and
compression increases bootspeed.
Change-Id: Id0c11cf6d9a605d24e3148abb8d11a65d48a4529
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36675
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: I8e07c8186baf3d8e91b77c5afb731d26a1abfbaf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Change-Id: Ia4553fb4cd95d2f1fa86eecbf382e6e6dec52b92
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36616
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I135f3e6ec5e75df03331c0c46edb0be243af2adb
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36498
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id8dcba8e83b0f896c26ab684d857908c6f272453
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36497
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Add a Kconfig option for indicating agreement to use the contents of
amd_blobs. Users should only download the repo after implicitely
agreeing to AMD's License text. No formal documented agreement
is required.
Update Makfile.inc, similar to other submodules, to initialize and
checkout the submodule once the Kconfig option is selected.
Change-Id: I4ae807659db16756453dc3db2c51848291c681b8
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Setting the cbfs prefix is prone to error. Therefore add a Kconfig
choice for 2 common values, fallback and normal, while still keeping
the ability to specify an arbitrary value.
Change-Id: I04222120bd1241c3b0996afa27dcc35ac42fbbc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35822
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
CONFIG_CBFS_SIZE should only be used as a parameter to generate the
default FMAP.
This also swaps around FMDFILE and CBFS_SIZE to avoid that the
CBFS_SIZE entry disappears when filling in the FMDFILE entry below it.
One advantage is that if code references CONFIG_CBFS_SIZE the jenkins
buildtest will most likely fail as many boards provide an FMD file.
Change-Id: Ic7926e1638d7fb49ba61af28d682315786c3c39e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
It won't build though, since current_time_from() has
been removed.
Change-Id: I2f7788f626c0504e6354a08b7986e4d18be140a5
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34201
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With RELOCATABLE_RAMSTAGE, S3 resume path only uses
memory that is reserved from OS. So there is no need
for low memory backup and recovery.
Change-Id: If7f83711685ac445abf4cd1aa6b66c3391e0e554
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/26834
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
ACPI S3 resume path can only modify low memory where
the non-relocatable ramstage resides, there is no need
to maintain a bigger backup copy.
Change-Id: Ifae41b51b359010ec02269c674936a87bd15623b
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/15476
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add explicit CBMEM_STAGE_CACHE option. Rename
CACHE_RELOCATED_RAMSTAGE_OUTSIDE_CBMEM to TSEG_STAGE_CACHE.
Platforms with SMM_TSEG=y always need to implement
stage_cache_external_region(). It is allowed to return with a
region of size 0 to effectively disable the cache.
There are no provisions in Kconfig to degrade from
TSEG_STAGE_CACHE to CBMEM_STAGE_CACHE.
As a security measure CBMEM_STAGE_CACHE default is changed to
disabled. AGESA platforms without TSEG will experience slower
S3 resume speed unless they explicitly select the option.
Change-Id: Ibbdc701ea85b5a3208ca4e98c428b05b6d4e5340
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34664
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
CONFIG_RELOCATABLE_RAMSTAGE is something more than ramstage specific
kconfig hence its better to remove HAVE_RAMSTAGE dependency
till stage_cache cleaner implementation lands here.
Change-Id: I3c238d727dc13014e2b77544d05099be95c22bab
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34198
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: Id56139a3d0840684b13179821a77bc8ae28e05ae
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34113
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Also remove allwinner/a10 dummy monotonic_timer
implementation.
Change-Id: I9dfa9b92dc63375465e3bb87b73eeefad601c810
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34112
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This is really an inverse of SMM_TSEG to flag
platforms that should potentially move away
from ASEG implementation.
Change-Id: I3b9007c55c75a59a9e6acc0a0e701300f7d21f87
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This code is currently only used by via/epia-m850,
it is also somewhat buggy.
Change-Id: I140e15d584d3f60f7824bcb71ce63724c11e3f46
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34078
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch makes CONFIG_RAMPAYLOAD default enable upon selection
of HAVE_RAMPAYLOAD kconfig from mainboard for x86 platform.
Without this CL, CONFIG_RAMPAYLOAD is still disabled although
mainboard has selected CONFIG_HAVE_RAMPAYLOAD.
Change-Id: I40308bbf970a0dbe5f7e2086ed8a7a70c2a3a32c
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33859
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Icf5e8fa18bea1cdfb85b8a4999d8fccea94d16b9
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33324
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
This patch removes all possible dependencies in order to build platform
with CONFIG_RAMPAYLOAD enable(without ramstage).
A. Create coreboot separate stage kconfigs
This patch creates seperate stage configs as below
1. HAVE_BOOTBLOCK
2. HAVE_VERSTAGE
3. HAVE_ROMSTAGE
4. HAVE_POSTCAR
5. HAVE_RAMSTAGE
B. Also ensures below kconfigs are aligned with correct stage configs
1. COMPRESS_RAMSTAGE and RELOCATABLE_RAMSTAGE are now enable if
CONFIG_HAVE_RAMSTAGE is selected.
2. COMPRESS_BOOTBLOCK will enable if CONFIG_HAVE_BOOTBLOCK is set
3. COMPRESS_PRERAM_STAGES will enable if CONFIG_HAVE_VERSTAGE
|| CONFIG_HAVE_ROMSTAGE is selected.
C. Also fix compilation issue with !CONFIG_HAVE_RAMSTAGE
On x86 platform:
Case 1: ramstage do exist: CONFIG_HAVE_RAMSTAGE=1
>> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_x86_32
Case 2: ramstage doesn't exist: CONFIG_HAVE_RAMSTAGE=0
>> rmodules_$(ARCH-ramstage-y) will evaluate as rmodules_
This patch fixes Case 2 usecase where platform doesn't select
CONFIG_HAVE_RAMSTAGE.
Also add option to create sipi_vector.manual based on $(TARGET_STAGE)
variable.
$(TARGET_STAGE)=ramstage if user selects CONFIG_HAVE_RAMSTAGE
$(TARGET_STAGE)=postcar if user selects CONFIG_RAMPAYLOAD
Change-Id: I0f7e4174619016c5a54c28bedd52699df417a5b7
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
The RAMPAYLOAD symbol added by 7e893a02c0 (Kconfig: Create RAMPAYLOAD
kconfig) is shown unconditionally for all x86 systems. It generally
creates a lot of confusion to prompt for something that isn't imple-
mented or not working. So guard it with another Kconfig that can be
selected by platforms that actually support it.
Change-Id: I6d158382d1000b8b40ca1368e2efff0c39884f15
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33263
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
These Kconfigs are mostly used in src/lib/.
Change-Id: I7aa5436c6ff5fef53fde2081e902d793f3581c1e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32882
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch enables coreboot flow to skip ramstage as
individual stage to load payload. Instead it is expected
to load payload from postcar stage.
Change-Id: I839f2d34a93b69ca6bf3de6594e2ad9f66ee7135
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32618
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ron minnich <rminnich@gmail.com>
|
|
I can't claim that I really understand what this code does, but it looks
like there are platforms that use code from lib/spd_bin.c without
enabling CONFIG_GENERIC_SPD_BIN. Some functions in that file contain
references to CONFIG_DIMM_MAX, so that option probably shouldn't depend
on CONFIG_GENERIC_SPD_BIN.
Change-Id: I041c52b6bd255e9a9920e5a101165ba5fc5fa6f3
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32548
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The entry for drivers/intel/fsp1_0/Kconfig was added under the
chipset menu before addtional FSP versions were added, and the
drivers/*/*/Kconfig entry added to support them. This results
in the fsp1_0 Kconfig items being duplicated in the Chipset and
Generic Drivers menus.
Remove the chipset entry since it's no longer needed.
Test: select FSP 1.0 mainboard (e.g. intel/minnowmax) in menuconfig,
observe FSP 1.0 Kconfig entries listed only under Generic Drivers menu.
Signed-off-by: Matt DeVillier <matt.devillier@puri.sm>
Change-Id: If1e78fb9259b1a46d308db829881eb3b3d17cf40
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32565
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
FIT support takes more heap memory than most coreboot payloads.
Change-Id: Id17f25e94d97e937b0e9a9cee3dd1a8aef1d525d
Signed-off-by: Marty E. Plummer <hanetzer@startmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/32392
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|