| Age | Commit message (Collapse) | Author |
|---|
|
For Mithrax and Felwinter, port C1 is on the left side and port C2 is on
the right side. Correct the values accordingly.
The board schematics was mirrored, so had to obtain an actual machine and physically check the correct ports.
BUG=b:321051330
TEST=emerge-${BOARD} coreboot then check ACPI table on DUT
Change-Id: I977c3b4081987592a1d46529eb848a07a6c4cb47
Signed-off-by: Won Chung <wonchung@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81363
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Emilie Roberts <hadrosaur@google.com>
|
|
Within ec_acpi.c, USB-C ports are iterated to be matched with
corresponding mux. The iteration happens from 0 to the number of USB-C
ports. Given iteration index i, the port with PLD group_token of (i+1)
is matched with mux_conn[i].
Mithrax and Felwinter devicetree matches conn1 to mux_conn[1] and conn2
to mux_conn[0]. However, conn1 is for usbX_port2 which has group_token
of 1 and conn2 is for usbX_port3 which has group_token of 2. Thus,
follow the convention to add conn1 to mux_conn[0] and conn2 to
mux_conn[1].
Otherwise, the kernel subsystem linking between Type C connector and USB
mux will be swapped.
BUG=b:329657774 b:121287022 b:321051330 b:204230406
TEST=emerge-${BOARD} coreboot then check ACPI table on DUT.
TEST=Manually check that usb-role-switches are mapped to the correct
port.
Attach USB 3 A to C cable from development machine to left port of
DUT.
Attach nothing to right-hand port.
usbpd lines are workaround for devices without firmware patch to
connect superspeed lines.
ectool usbpd 0 none
ectool usbpd 0 usb
ectool usbpd 1 none
ectool usbpd 1 usb
echo host > /sys/class/typec/port0/usb-role-switch/role (should
succeed)
echo host > /sys/class/typec/port1/usb-role-switch/role (should fail
as no cable attached)
Change-Id: I349682a6fe3fe4848e4e86d9c446530a31b35875
Signed-off-by: Won Chung <wonchung@google.com>, Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81354
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Emilie Roberts <hadrosaur@google.com>
|
|
Copy ACPI _PLD values from USB ports to corresponding USB muxes so that
the kernel can create symlinks between Type C connectors and
corresponding USB muxes. This symlink will be used to let userspace be
able to modify the USB role without knowing ACPI topology for the
device.
BUG=b:121287022 b:329657774
TEST=emerge-${BOARD} coreboot then check ACPI table on DUT
Change-Id: If27042cc995ef188f8a3e31444e994318ff98803
Signed-off-by: Won Chung <wonchung@google.com>
Tested-by: Emilie Roberts <hadrosaur@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81089
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Emilie Roberts <hadrosaur@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
soc/intel/xeon_sp/acpi/*.asl are actually used only by SKX and CPX
platforms and not forward compatible to later SoC generations.
Move them to soc/intel/xeon_sp/acpi/gen1/ for clean maintenance.
TEST=Build and boot on intel/archercity CRB
Change-Id: Ib060b123ab0fd761f00d9a0573e9b73d600ea9ef
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82033
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For PCI domains, static _OSC will be used for better readability
and maintenance.
This reverts commit f4a12e1d39a097e17007ef11ccf784c2a42f1924.
TEST=Build and boot on intel/archercity CRB
Change-Id: I2e2b2f0533a3940caf2806ec1ed048c30e4ba801
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82032
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This file is appended to Documentation/util.md by the util_readme.sh
script, and contains toctree entries for utilities with more in-depth
documentation than the description automatically pulled from the
description.md files throughout the util directory. As of commit
35599f9a6671 (Docs: Replace Recommonmark with MyST Parser), the syntax
for creating a toctree has changed, so update this post_util.md
accordingly.
Change-Id: Ia7ae3c513781e53512763578fd97db7e2f75e65c
Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Use the default position for ramtop and exclude it from the checksum.
Fixes invalid checksum after caching ramtop causing things like
disabling CSME to not work.
Fixes: 10d2af04e754 ("mb/system76: Add space for ramtop in CMOS layout")
Change-Id: If30df1e6f2735cf767856e42dfede3d17fe494eb
Signed-off-by: Tim Crawford <tcrawford@system76.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81641
Reviewed-by: Jeremy Soller <jeremy@system76.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configure eMMC DLL tuning values for Sundance board Samsung sku.
BUG=b:337741162
TEST=Use the value to boot on Sundance successfully.
Change-Id: I5f1e03c06c9f8567e757fed999730dff2551f1e0
Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82173
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the PCI numbers with the reference names from the chipset
devicetree. Also, remove their comments since they are superfluous now.
Change-Id: I49f5fda5628b2ebc76cd8db20c8f7fe85c676c7a
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82157
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Clean up the devicetree by removing entries which are equal to the
chipset devicetree. The P2SB device is enabled but it's hidden by the
FSP. So just remove that as well since the chipset devicetree configures
it correctly.
Change-Id: I38f46949d36359826317252e8d3434ad1b24382d
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82156
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Replace the PCI numbers with the reference names from the chipset
devicetree. Also, remove their comments since they are superfluous now.
Change-Id: Ib873854954e44b3ea370c2574da5db9792a446e9
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82155
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up the devicetree by removing entries which are equal to the
chipset devicetree. The P2SB device is enabled but it's hidden by the
FSP. So just remove that as well since the chipset devicetree configures
it correctly.
Change-Id: I6186d295427bcd4a3b696f4df59d94a148ced011
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Fill GPIO table for pujjoga.
BUG=b:336469694
TEST=emerge-nissa coreboot
Change-Id: I3f633cf99f56d5f855015de805e16c1205c9bc99
Signed-off-by: leo.chou <leo.chou@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82044
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Update TDP PL1 value for the DTT optimization. The new value 18W is from
internal thermal/performance team.
- tdp_pl1_override: 15 -> 18 (W)
BUG=b:336684032
BRANCH=brya
TEST=built and verified MSR PL1 value.
Intel doc #614179 introduces how to check current PL values.
[Original MSR PL1/PL2/PL4 register values for xol]
cd /sys/class/powercap/intel-rapl/intel-rapl\:0/
grep . *power_limit*
constraint_0_power_limit_uw:15000000 <= MSR PL1 (15W)
constraint_1_power_limit_uw:55000000 <= MSR PL2 (55W)
constraint_2_power_limit_uw:114000000 <= MSR PL4 (114W)
After this patch:
constraint_0_power_limit_uw:18000000
constraint_1_power_limit_uw:55000000
constraint_2_power_limit_uw:114000000
Change-Id: I28c4f099e0169e8389f63083c03023dd8338589f
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82151
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update I2C5 timing parameter values to meet I2C bus spec.
- fall_time_ns: 400 -> 200
BUG=None
BRANCH=brya
TEST=built and measure I2C5 timing parameters
Before:
tLOW : 1.88 us (spec >= 1.30)
tHIGH: 0.57 us (spec >= 0.60)
fSCL : 399.80 KHz
After:
tLOW : 1.60 us (spec >= 1.30)
tHIGH: 0.97 us (spec >= 0.60)
fSCL : 392.1 KHz
Change-Id: I386b2765410fd10b8cd711f54478fb52428de5a3
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82100
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Create the riven variant of nissa reference board by copying the
template files to a new directory named for the variant.
The riven variant is a twinlake platform.
BUG=b:337169542
TEST=util/abuild/abuild -p none -t google/brya -x -a
make sure the build includes GOOGLE_RIVEN
Change-Id: I1be2346d87c891cc0e5fbda094e1f6e0dd60df1b
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82132
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iefe61d3ad51d355806716483248df5b1083b69bc
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82149
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Required in SSDB for Windows drivers. Tested on google/brya (kano)
and verified Intel Webcam shows up to Windows as a camera source
Change-Id: Id6089f6bd841333882e28de9307fe5e48e368d02
Signed-off-by: CoolStar <coolstarorganization@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82068
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add pujjoga supported memory parts in mem_parts_used.txt, generate
SPD id for this part.
1. Samsung K3KL6L60GM-MGCT, K3KL8L80CM-MGCT
2. Hynix H9JCNNNBK3MLYR-N6E, H58G56BK7BX068
3. Micron MT62F1G32D2DS-026 WT:B
BUG=b:337990338
TEST=Use part_id_gen to generate related settings
Change-Id: I39d44fd278474a7375ad1d2d904d14b9463ba86d
Signed-off-by: roger2.wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82135
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Based on schematic of 500E_GEN4S_ADL_N_MB_0418, generate overridetree.cb
settings for Pujjoga.
BUG=b:337611700
TEST=FW_NAME= pujjoga emerge-nissa coreboot chromeos-bootimage
Change-Id: I279f94044a22f25100a44b1abe2ef5fb6d0dd835
Signed-off-by: roger2.wang <roger2.wang@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82109
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
There's nothing in this header file that needs to be updated for the
Phoenix SoC, so remove the 'Update for Phoenix' TODO.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9d7b5e8d8d6c8c22c2fae8e89d073481d21d8bdc
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82150
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When in Package C3 or deeper the PSI settings are used to switch the
CPU VR into a low power state. It was found that the voltage regulator
on the Sandy-Bridge series has non-default PSI settings, compared to
Lenovo's Ivy-Bridge series. Apply the same PSI value for PSI2 and PSI3
as the vendor BIOS does to fix a hang when the package is idle.
Since neither the vendor BIOS is open-source, nor datasheet exists for
the used VR it's unclear why those PSI values must be used and how
they influence the regulator.
The X220 already has the correct PSI values configured and is now stable
for more than 24h in Package C7 state.
TEST: Not tested on the affected boards, only checked vendor firmware.
Change-Id: Idf8c3719f19f7bcdab30c543215c8abd2669cfd2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82070
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The current fast_spi code uses memcpy for rw. The SPI flash read/write
has 4 byte limit, due to which the current 64 bit memcpy doesn't work.
Hence update rw ops to use read32p/write32p.
BUG=b:242829490
TEST=Verified MRC cache working on MTL 64-bit, future 64 bit platforms
and RPL(brox/skolas) 32-bit platforms.
Change-Id: I317c7160bf192dd2aeacebf6029a809bc97f3420
Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82079
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Adjust setting is from power team.
Change from 172W to 180W
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST= FSP debug emerge-ovis coreboot intel-mtlfsp
check overrides setting
Change-Id: Icc8b12adc9fb9f680b05131c8d41212865223ca9
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Adjust setting is from power team.
Itrip(GT) FVM 54
Itrip(SA) FVM 27
BUG=b:320410462
BRANCH=firmware-rex-15709.B
TEST= FSP debug emerge-ovis coreboot intel-mtlfsp
check overrides setting
Change-Id: I6d6cf7cecaac650a7b1784833b4afb8dffb3db2c
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82176
Reviewed-by: Derek Huang <derekhuang@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
U-Boot v2024.04 was released on Tue 02 April 2024
Change-Id: I21fe81e9e01f2f21f9a4581fa8fdbf661fe270bd
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82007
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When CONFIG_LP_MULTIBOOT is enabled, save the values of EAX and EBX
passed from the bootloader. This information can be useful for
multiboot payloads feature alone.
Change-Id: I98c2cd00206ee48eb0fc67edd9533032bcf3e5eb
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82040
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Replace transitional 'pkg-config' package with 'pkgconf'.
Change-Id: I9ee895cb2ca3186c4aefbdab1fd71778bf981009
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82167
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
SOC_INTEL_PCIE_64BIT_ALLOC is not used.
Change-Id: I1ef52104ef1d883330b800215cb4d0475092d8fe
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81975
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
WIFI_MTCL_CBFS_FILEPATH is now used.
Change-Id: Icdd0332ae9c56a54596a775c0a9aa7b9f8d6738c
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81974
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Correct .UserBd field to BOARD_TYPE_ULT_ULX from BOARD_TYPE_MOBILE. This
is from Intel's guidance for MRC to map the memory speed to proper POR
number.
BUG=b:332980211
BRANCH=brya
TEST=Built and compare the results of command 'dmidecode -t 17'
[Before]
(Same values in all of memory device handle)
Speed: 6400 MT/s
Configured Memory Speed: 6400 MT/s
[After]
(Same values in all of memory device handle)
Speed: 5200 MT/s
Configured Memory Speed: 5200 MT/s
Change-Id: Id16bcbc2d0cb4c2cf3008cf2ef1027ed98e93afb
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82180
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jamie Chen <jamie.chen@intel.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
bmp_load_logo() loads the custom logo.bmp file into CBMEM. This cbmem
buffer is released after FSP-S init is complete. In certain platforms,
the logo file is displayed during PCI enumeration. This means the logo
buffer is used after it is released. Fix this issue by releasing the
logo buffer when the coreboot has finished loading payload. During S3
scenario CBMEM is locked, bmp logo is not loaded and hence the release
is a no-op.
BUG=b:337144954
TEST=Build Skyrim BIOS Image and boot to OS. Ensure that the chromeOS
boot logo is seen without any corruption.
Change-Id: Id27cf02de04055075e7c1cb0ae531dee8524f828
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82121
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Van Patten <timvp@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: I06e5ff635c37253b1c8f151b62f696ff7e5e22ef
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82110
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The default MT8186 platform is to initialize USB3 port 1.
Use option bit 27 in fw_config to enable initialization of USB2 port 0
to support devices mounted on it.
BUG=b:335124437
TEST=boot to OS from USB-A
boot to OS from SD Card
BRANCH=corsola
Change-Id: I725b80593f5fc498a204bf47f943c36ccbd78134
Signed-off-by: Wentao Qin <qinwentao@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82089
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Change-Id: I0c4f74c7b27c8bb5599d68305adf369ddc6fcc70
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Boot device is stubbed to be able to build boards without errors.
Change-Id: Ie74b1e34f9aebe151d0fdb0e95c003510fd864c3
Signed-off-by: Igor Bagnucki <bagnucki02@gmail.com>
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67062
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Integrated Boot Logic (IBL) codes doesn't support bootloader
controlled Primary-to-Sideband Bridge (P2SB) hidden and unhidden.
Hence, dynamically read IBL HPET/IOAPIC Bus:Device.Function (BDF)
by bootloader is not supported, because when P2SB is hidden the
register access is denied.
TEST=Build and boot on intel/archercity CRB
TEST=Build on intel/avenuecity CRB
TEST=Build on intel/beechnutcity CRB
Change-Id: I3975cb00e215c4984c63bb8510e8aef7d4cc85a4
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81321
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Configuration variable implementation (VPD, et al) is regarded to
be mainboard specific and should not be bounded to SoC codes.
This patch moves the VPD based settings (FSP log level, et al)
from SoC codes to mainboard codes.
TEST=Build and boot on intel/archercity CRB with no significant log
differences
Change-Id: Iefea72eec6e52f8d1ae2d10e1edbabdebf4dff91
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82090
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Configuration variable implementation (VPD, et al) is regarded to
be mainboard specific and should not be bounded to SoC codes.
Add get_cxl_mode so that SoC codes do not need to get this
configuration from VPD any more.
TEST=Build and boot on intel/archercity CRB with no significant log
differences
Change-Id: I1e08e92ad769112d7e570ee12cf973451a3befc0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82092
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch sets different names for different mtlrvp
variants so they can be matched properly at runtime against
unique frids (i.e. firmware read-only identifiers).
BRANCH=firmware-rex-15709.B
TEST=Verified boot functionality on intel/mtlrvp
Change-Id: I5292a0ffcd7524c55cd7aef37c2f59432b2af06a
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Clean up by using is_devfn_enabled().
Change-Id: I9ea3d8b1b18e84a75a81a7e926d2c638766bb493
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82120
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Clean up by using is_devfn_enabled().
Change-Id: I9a4984a096e72025e161bf117b70a7c59f2bb094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82118
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In NUMA architecture, all devices (cpu, memory and PCI device)
belong to specific proximity domain. Add utils to map device
instance to their proximity domain.
Proximity domain ID is the index assigned at the creation of
proximity domains. There is no hard relationship between proximity
domain ID and the device identities (e.g. socket ID). Hence we
need the map utils to explicitly link them.
For now the Sub-NUMA config isn't taken into account.
TEST=Build and boot on intel/archercity CRB
Change-Id: Icd14a98823491ccfc38473e44a26dddfbbcaa7c0
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81440
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
TEST=Build and boot on intel/archercity CRB
Change-Id: I84f07c16e24e441a885144df8c805f1310acae29
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Co-authored-by: Ziang Wang <ziang.wang@intel.com>
Co-authored-by: Gang Chen <gang.c.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81439
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
One URL in this document did not show up as a link. Fix it.
Change-Id: I22bf2014e71e6a127a7981cc90a028e48c25da49
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82160
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total
SPD size of 512 bytes. Set this as the default and remove the setting
from mainboard Kconfigs.
Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Sets`PLATFORM_USES_FSP2_X86_32' to `n' by default if FSP 2.4 is
enabled as 64-bits FSP should be norm moving forward.
BUG=b:329034258
TEST=verified on Lunar Lake RVP board (lnlrvp)
Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec98
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80323
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
Reviewed-by: Usha P <usha.p@intel.com>
Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Add FSP 2 Multi Processor Platform Initialization module a function
indirection to ensure that efi_ap_procedure functions are called with
the appropriate C calling convention.
BUG=b:329034258
TEST=Verified both x86_32 and x86_64 builds on Meteor Lake board (Rex)
Change-Id: I64e65b2941207375d5e27c84aa26061e7e72a7f6
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81663
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Same fsp_header struture is being used for x64 and x32 modes
and hence dropping the x64 assertion.
BUG=b:329034258
TEST=Verified on Meteor Lake board (Rex)
Change-Id: I6013af342670e6377a3fe7641d7d9b52c9b6f57c
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81662
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
- Stack alignment:
1. FSP functions must be called with the stack 16-bytes aligned
in x86_64 mode.This is already setup properly with the default
value of the `mpreferred-stack-boundary' compiler option (4).
2. The FSP heap buffer supplied by coreboot through the `StackBase'
UPD must be 16-bytes aligned. This alignment is consistent for
both x86_64 and x86_32 modes to simplify the implementation.
BUG=b:329034258
TEST=Verified on Meteor Lake board (Rex)
Change-Id: I86048c5d3623a29f17a5e492cd67568e4844589c
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81661
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
Add GPP_F18 configuration in early_gpio_table.
Without this, DUT cannot get the proper state of this signal on early
phase. It allowed DUT to attempt to enter into dev mode when EC is in RW
currently, it causes the failure of autotest/firmware_DevMode.
BUG=b:337365524
TEST=built and run autotest firmware_DevMode
Change-Id: I2179bb10b431547bc35f332c74915a63495b779d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82099
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
|
|
GPP_D14 is floating when ISH is not being used and wasting power. Add
pulldown to prevent this from happening.
BUG=b:336654954
BRANCH=None
TEST=emerge-brox coreboot chromeos-bootimage
make sure OS boots up
HW team validated that power usage is 20 mW lower
Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70
Signed-off-by: Shelley Chen <shchen@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
As described in Intel document 336464 (8th gen S series datasheet volume
1), the CPU's 4 eDP lanes can be bifurcated, so that DDI-A (eDP) ends up
with 2 lanes, and DDI-E (DP, typically used for VGA) has the remaining 2
lanes. This lets mainboards provide a VGA output without sacrificing one
of the main 4-lane DDIs. Newer platforms seem to be lacking this.
However, the way this is structured in coreboot does not allow boards to
choose whether bifurcation should be enabled. Most boards in the tree do
not use DDI-E (it doesn't exist on mobile platforms), but there are some
boards (e.g. hp/280_g2) that use DDI-E and a DP-to-VGA converter chip to
provide a VGA output.
Replace `SOC_INTEL_CONFIGURE_DDI_A_4_LANES` with two new Kconfig options
to allow boards to decide. Use `SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION` to
specify whether a platform supports DDI-A bifurcation at all (do nothing
otherwise, maintaining the original code's behaviour). If bifurcation is
supported, the `SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION` is used to clear
or set the `DDI_A_4_LANES` bit in the `DDI_BUF_CTL_A` register.
Change-Id: I516538db77509209d371f3f49c920476e06b052f
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82113
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The DVI connector on this board is DVI-D (digital only), not DVI-I.
Change-Id: I74c1257efb67cfdff2ae04a42c163dd320c850a4
Signed-off-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82112
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP
so that it can still act as a wake source during S3 suspend.
BUG=b:336398012
TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup
using Trackpad.
246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3
247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3
248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67
249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3
250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3
251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67
Also suspend to S0ix and wakeup using Trackpad.
Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shelley Chen <shchen@google.com>
|
|
Found in a Clevo V560TU with Intel Core Ultra 155H
Change-Id: I0f10808fd0e2d9c122743615fbce656c6d2447cc
Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82071
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In a server platform many silicon specific register lock operations
are by default in FSP space. CHIPSET_LOCKDOWN_FSP provides an option
to make sure the codes could be used out-of-box to build products.
Change-Id: I8efcc1f27446be8e35f51e2568c4af6f8165486b
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82081
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
|
|
Change-Id: I5170a69d798d0e8198b89f6932a80e6051228ac2
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82082
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The Fn key on Xol emits a scancode of 94 (0x5e).
BUG=b:327656989
TEST=Flash xol, boot to Linux kernel, and verify that KEY_FN is
generated when pressed using `evtest`.
Change-Id: I34ed93d9666504bfd4d439e166911e49f58e5ff5
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82069
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Fix ++ as suffix and * precedence. After modification, the gpio index
can be obtained correctly.
The error was introduced in the commit making it public:
commit 01344bce
BUG=None
TEST= Can get the correct index test on nissa.
Change-Id: I7a3eb89633aaebebc8bd98ac6126c578fda23839
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82088
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When installing the packages, apt-get returns an error about holding
broken packages. It occurs the diffutils depends on libcurl4t64
which breaks the libcurl4.
As a solution, remove the libcurl4 from the list, and let the package
manager resolve the dependencies.
TEST=Build coreboot-sdk
Change-Id: Iabc4f74619d4462317d8adb4068e50135d89d80e
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82066
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
This is a minimal framework that allows the build to compile.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ief4b5c75471a2ef5bedaaee9b4737510c2826b6e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81978
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7f18f2d754f24bfcc9cbf95a98fa6fe40aaf3b02
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82091
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
If the TPM is not detected in the system it may mean it is inactive
due to enabled ME with active PTT. In such case, the chipset will route
the TPM traffic to PTT CRB TPM on Intel systems.
If TPM is not probed, disable the PC80 TPM device driver, so that
coreboot will not generate improper SSDT ACPI table.
Change-Id: I05972ad74a36abaafa2f17a16f09710550a3a3f3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80455
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
If CRB TPM is not detected in the system it may mean it is inactive
due to disabled or neutered ME. In such case, the chipset will route
the TPM traffic to LPC/SPI on Intel systems.
If CRB TPM is not probed, disable the CRB TPM device driver, so that
coreboot will not generate improper SMBIOS/SSDT ACPI tables.
Change-Id: Ie0928536d9042b1f680d585e1ca9ad2cadf0c8ef
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80454
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
|
|
Remove duplicate config entry CHROMEOS_WIFI_SAR as it is
used at the baseboard.
BUG=None
TEST=emerge-rex coreboot
Change-Id: Iabf0e490103c2097f3f033036839b77b5a0bb1b3
Signed-off-by: YH Lin <yueherngl@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81226
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use better alignment attribute macro and add missing identifier names
for function definition arguments.
Change-Id: I1c5c33fc9210f068ff88c8d981f1a1c739890c9c
Signed-off-by: Integral <integral@member.fsf.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82050
Reviewed-by: Julius Werner <jwerner@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RAMOOPS memory region was being overwritten by coreboot bmp_load_logo()
function. The CBMEM_ID_FSP_LOGO region created during bmp_load_logo()
was overlapping with RAMOOPS space created earlier. This resulted in
memory corruption of RAMOOPS buffer.
To prevent this, the RAMOOPS region allocation is moved to
BS_DEV_INIT_CHIPS phase from earlier BS_WRITE_TABLES phase of boot.
BUG=b:332910298
TEST=build and boot coreboot image on google/rex HW. Check RAMOOPS
CBMEM region creation using cbmem -l command
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Change-Id: Ibae06362cd80eacb16f6cf0eed8c9aa1fbfb2535
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82042
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eran Mitrani <mitrani@google.com>
Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
This patch adds support for the new command-line option `-c` to
the ifdtool, which is able to check GPR0 (Global Protected Range)
status.
This patch also add helper function get_enabled_gprd() to get enabled
GPR0 settings. It used in enable_gpr0() and is_gpr0_protected().
Developers can use ifdtool with '-c' option to check whether GPR0 is
set to enabled or disabled in the binary file.
BUG=none
TEST=(1) > ifdtool -p mtl -E image-unlocked.bin -O image-lock.bin
...
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
...
GPR0 protection is now enabled
(2) > ifdtool -p mtl -c image-unlocked.bin
GPR0 status: Disabled
Value at GPRD offset (64) is 0x00000000
--------- GPR0 Protected Range --------------
Start address = 0x00000000
End address = 0x00000fff
(3) > ifdtool -p mtl -c image-lock.bin
GPR0 status: Enabled
Value at GPRD offset (64) is 0x83220004
--------- GPR0 Protected Range --------------
Start address = 0x00004000
End address = 0x00322fff
Change-Id: I6b3af973be784200b965a68e5f6b7737cba03ed7
Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81928
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Reka Norman <rekanorman@chromium.org>
|
|
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config
field to prevent depthcharge build break.
BUG=b:333494257
TEST=emerge-brox coreboot depthcharge sys-boot/chromeos-bootimage
Change-Id: Idb62e3f37e1480979ae529692455beb533434520
Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82056
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
1.Enable CHROMEOS_WIFI_SAR flag to load a SAR table for Intel module.
2.Describe the FW_CONFIG probe for the settings on glassway.
- WIFI_SAR_0 for Intel Wi-Fi module AX211
BUG=336051631
BRANCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I9e43081c93ef17291c5d55cf262a0f4d1497447b
Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81781
Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Upload initial configuration for nova based on proto schematics.
Memory:
SAMSUNG 2G*4 K4U6E3S4AB-MGCL
HYNIX 2G*4 H9HCNNNBKMMLXR-NEE
BUG=b:328711879
TEST=FW_NAME=nova emerge-constitution coreboot chromeos-bootimage
Change-Id: Ic9ff3ed2fb3a7f0f100385d0a0444d38fcff5c51
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
|
|
Add stop pin control for G2 touchscreen
BUG=b:335803573
TEST=build and verified Touchscreen work normally
Change-Id: I7e0bbc7722cdda6bcca0485009fcf8510b1f55e2
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81971
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
We can assume that platforms, which select HAVE_INTEL_PTT, will not
have any other CRB TPM than PTT. Check whether PTT is available before
forcefully initializing the TPM and selecting the CRB interface in the
TPM configuration registers.
Change-Id: If0ec6217b0e321b7d7a9410b70defde3c3195fc3
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80453
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Add STA_ER88577 MIPI panel for Wugtrio.
Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf
BUG=b:331870701
TEST=emerge-staryu coreboot chromeos-bootimage
BRANCH=corsola
Change-Id: I279d431d80ca0770540d88e213d4aeafe77038ce
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82055
Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add STA panel STA_ER88577 serializable data to CBFS.
Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf
About the init code, we communicated with the vendor through the
datasheet to confirm the writing method of each register value.
BUG=b:331870701
TEST=build and check the CBFS includes the panel
BRANCH=None
Change-Id: I210b23b67fbc102c9926171f1c78f6824820e4b7
Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82054
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Explicitly assign a value of 0 to the first value of the
pcie_swizzle_pin enum. This won't change the behavior, but clarifies
that the actual values of the enum elements matter.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I21850e21f859f2079f804d4344a1a11856b27d90
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82049
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Rename the 'irq' element of the pci_routing_info struct to 'bridge_irq'
to better describe what it's doing. This struct element contains the
number of the northbridge IOAPIC IRQ input the bridge IRQ is connected
to signal power management or error reporting IRQs. Right now, coreboot
doesn't put this information into the ACPI bytecode.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6410be673d15d6f9b5eb4c80b51fb705fec5b155
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82048
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
This patch extends the cpu_get_cache_info function, so that
additional information like size of cache lines can be retrieved.
Patch was tested against the qemu-sbsa mainboard.
Change-Id: If6fe731dc67ffeaff9344d2bd2627f45185c27de
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/79106
Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
There are 4 different chassis types specified by vendor firmware, each
with a slightly different HWM configuration.
The chassis type to use is determined at runtime by reading a set of
4 PCH GPIOs: 70, 38, 17, and 1.
Additionally vendor firmware also provides an option to run the fans at
full speed. This is substituted with a coreboot nvram option in this
implementation.
This was tested to make fan control work on my OptiPlex 7020 SFF.
NOTE: This is superficially similar to the OptiPlex 9010's SCH5545
however the OptiPlex 9020's SCH5555 does not use externally
programmed EC firmware.
Change-Id: Ibdccd3fc7364e03e84ca606592928410624eed43
Signed-off-by: Mate Kukri <kukri.mate@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81529
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add a new GPIO port cbj-sleeve for kernel driver to call. At the same
time, a new rt5645 driver is added to replace the generic driver to
parse gpio. After entering the system, it is pulled high by the kernel
to enable the MIC function.
BUG=None
TEST=MIC function is normal
Change-Id: I093be6a3e357aae389fcbe8291a9701c40b62e15
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81774
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
RT5663 is very old and it was used the hard code like RT53 or 10EC5663,
which is the different series from RT5645/5650, it may caused some
ambiguity. Because I2C generic driver dose not support dsd gpio
setting, we declared the new rt5645 series driver for expansion.
Add RT5645 AMP support. The kernel driver of 5650 is written
in rt5645.c. Add acpi name cbj-sleeve-gpios for power gate GPIO.
ALC5650 DataSheet Rev 0.93
Realtek upstream link:
https://lore.kernel.org/all/20240404035747.118064-1-derek.fang@realtek.com/
Hide the device because of Microsoft Windows.
BUG=None
TEST=verified in anraggar and probe device rt5650 succeed
```
\_SB.PCI0.I2C3.RT58: Realtek RT5650
```
Change-Id: I602fcc4dd8576043943f6e20884edc4703350320
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81773
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
FSP 2.4 brings FSP 64-bits support which requires some adjustments in
coreboot:
FSP/UEFI uses the Microsoft x64 calling convention. Appropriate
attribute has to be set to all functions calling or called by
the FSP.
BUG=b:329034258
TEST=verified on Lunar Lake RVP board (lnlrvp)
Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec99
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80277
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
|
|
Add the graphics device IDs for Twinlake platform based on
Platform External Design Specification.
Document ID: 645548
BUG=b:326901448
TEST=Build tivviks and verify the IGD IDs.
Change-Id: Ide008d5c5302bd589784bc917a2610c42a0fdee4
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82038
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Fix custom_pld for USB2-C2 and USB3-C3 with same PLD group.
Update USB2-A4 PLD group token.
USB2/USB3 Type-C Port C2
"ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(3, 1))"
USB2/USB3 Type-C Port C3
"ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(4, 1))"
BUG=b:320203629
BRANCH=firmware-rex-15709.B
TEST= emerge-ovis coreboot
Change-Id: Ieecf0f7dda671a421e4e4a4adbf83240fadd018d
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82036
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Set unused pin to NC internal PU 20K
BUG=b:325674908
BRANCH=firmware-rex-15709.B
TEST= emerge-ovis coreboot
Change-Id: I78eddaa41c14721eeb6ff33a4cb15382853e430b
Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82035
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ifdfdbf193bd96a6dda72a2f23d51925fd369aa01
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82013
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
In the non-stub openSIL coreboot glue code, this can be used to add the
ALIB SSDT.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3ccd2e81211417ad4ac94f208572e0fa4e1cf97c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82012
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allow to set board specific CPU voltage regulator settings.
The VR12 compatible voltage regulator for the CPU can be configured
by two MSRs. Currently a default value is applied, which mimics the
Intel reference code and is what the BWG suggest. However most board
vendors fill in the actual VR parameters to support OC or ULV board
variants.
When the mainboard design is too different from the Intel reference
design, not updating the VR settings might result in:
- unstable system behaviour
- limited turbo performance
- excessive battery drain
- no over-clocking capability
This patch adds support to set the board specific current limit for
Icc and Igfx.
It also allows to adjust PSI1, PSI2 and PSI3, which are powerstates
used by the VR, that consume less energy when the system is idle.
Test on Lenovo X220 with full CPU load after 1 minute, compared to
previous code with default settings:
- Limiting PP0 max current below Iccmax results in less CPU performance.
RAPL readings show that less power is drawn over time.
- Limiting PP0 max current to Iccmax results in equal CPU performance.
RAPL readings show that the same power is drawn over time.
- Setting the PP0 max current to a value >> Iccmax results in equal CPU
performance. RAPL readings show that the same power is drawn over
time.
- Updating the MSR at runtime has no effect.
Change-Id: I59edab47fc4fbe0240e1dd7d25647f7549b4def2
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81597
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch introduces fsp print helper macros to print
`efi_return_status_t' with the appropriate format. These macros
are now used for fsp debug prints with return status
efi_return_status_t is defined as UINT64 or UNIT32 based on the
selected architecture
BUG=b:329034258
TEST=Verified on Meteor Lake board (Rex)
Change-Id: If6342c4d40c76b702351070e424797c21138a4a9
Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81630
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If the ChromiumOS EC indicates that the device has an assistant key,
we should also add it to the generated linux,keymap binding. This
commit simply does so by examining the keyboard capabilities reported by
the EC.
BUG=b:333088656
TEST=With a device that has an assistant key, flash AP FW and verify
that the key is mapped to `KEY_ASSISTANT` in the Linux kernel using
`evtest`.
Change-Id: I217220e89bce88e3045a4fc3b124954696276442
Signed-off-by: Aseda Aboagye <aaboagye@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81996
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
When the input device pointer pointing to a domain device,
dev_get_domain returns the input device itself.
TEST=Build and boot on intel/archercity CRB
Change-Id: I3a278a8f573de95406ee256fba17767def4ad75d
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81957
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Do not fill the ACPI table entry associated with the cros_ec_typec
driver once we switch to the UCSI kernel driver. Skip the ACPI entry if
EC implements the UCSI_PPM feature, and the CBI flag to enable UCSI is
set.
BUG=b:333078787
TEST=emerge-brox coreboot chromeos-bootimage
Cq-Depend: chromium:5416841
Change-Id: I67dff6445aa7ba3ba48a04d1df3541f880d09d0a
Signed-off-by: Pavan Holla <pholla@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81967
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The DPTF parameters were defined by the thermal team.
Based on thermal table in 330817690#comment33.
Set 6w "tcc_offset" to "15" by fw_config.
BUG=b:330817690, b:290705146
BRUNCH=firmware-nissa-15217.B
TEST=emerge-nissa coreboot chromeos-bootimage
Change-Id: I19100d960919dc3087fd067c24659de467eea276
Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81997
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
|
|
Currently, arch/arm64 requires coreboot to run on EL3 due
to EL3 register access. This might be an issue when, for example,
one boots into TF-A first and drops into EL2 for coreboot afterwards.
This patch aims at making arch/arm64 more versatile by removing the
current EL3 constraint and allowing arm64 coreboot to run on EL1,
EL2 and EL3.
The strategy here, is to add a Kconfig option (ARM64_CURRENT_EL) which
lets us specify coreboot's EL upon entry. Based on that, we access the
appropriate ELx registers. So, for example, when running coreboot on
EL1, we would not access vbar_el3 or vbar_el2 but instead vbar_el1.
This way, we don't generate faults when accessing higher-EL registers.
Currently only tested on the qemu-aarch64 target. Exceptions were
tested by enabling FATAL_ASSERTS.
Signed-off-by: David Milosevic <David.Milosevic@9elements.com>
Change-Id: Iae1c57f0846c8d0585384f7e54102a837e701e7e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/74798
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-by: ron minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
Fix checkpatch error.
Change-Id: I890fcfa4ad7b7abe032248b435271514e8e264f3
Signed-off-by: Naveen R. Iyer <iyernaveenr@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82001
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This should keep new makefiles from being named Makefile.inc.
Change-Id: I4a47998e1c997b82b8a15319eae96cdc0de64e77
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81857
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
|
|
Core 2 platforms have issues with HPET. Enable support to use the LAPIC
driver so those machines actually boot and don't hang.
The LAPIC is actually closer to the CPU than the HPET (on the PCH),
which reduces access latency, leading to higher resolution of the timer.
Tested on a Lenovo X200 with a Core 2 Duo.
Change-Id: I33144d6c1c120e7faa47b99e8262b0997c45c9b9
Signed-off-by: Jean Lucas <jean@4ray.co>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82000
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
Generated using update_ec_headers.sh [EC-DIR].
The original include/ec_commands.h version in the EC repo is:
b3b35d6433 PPM: Rename ucsi_disabled to ucsi_enabled
The original include/ec_cmd_api.h version in the EC repo is:
562316a71e include: Add fingerprint host commands to ec_cmd_api.h
BUG=b:333078787
TEST=cros build-packages --board brox \
chromeos-bootimage depthcharge coreboot
TEST=cros build-packages --board brya \
chromeos-bootimage depthcharge coreboot
BRANCH=none
Change-Id: I94b509cd6ad8f24bfc3b44ef02633d06320f1e22
Signed-off-by: Pavan Holla <pholla@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81965
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
Commit 00b40090aecf ("mb/google/brox: Move hda verb to variant dir")
introduces a variant-specific file for the HDA verb tables, which
commit 1bf0c3f1897c ("mb/google/brox: Create lotso variant") was missing
which caused the build to fail when both patches were submitted. To fix
the tree, add this file to the newly created lotso variant.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8a85115a204d9d9447a58da71eb65b1de963023d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82014
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
