summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-02soc/intel/xeon_sp: Add get_cxl_modeShuo Liu
Configuration variable implementation (VPD, et al) is regarded to be mainboard specific and should not be bounded to SoC codes. Add get_cxl_mode so that SoC codes do not need to get this configuration from VPD any more. TEST=Build and boot on intel/archercity CRB with no significant log differences Change-Id: I1e08e92ad769112d7e570ee12cf973451a3befc0 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Signed-off-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82092 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-02soc/intel/mtlrvp: use different names for mtlrvp variantsYH Lin
This patch sets different names for different mtlrvp variants so they can be matched properly at runtime against unique frids (i.e. firmware read-only identifiers). BRANCH=firmware-rex-15709.B TEST=Verified boot functionality on intel/mtlrvp Change-Id: I5292a0ffcd7524c55cd7aef37c2f59432b2af06a Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-02soc/intel/xeon_sp: Clean up device enablement configurationFelix Singer
Clean up by using is_devfn_enabled(). Change-Id: I9ea3d8b1b18e84a75a81a7e926d2c638766bb493 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82120 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-02soc/intel/cannonlake: Clean up device enablement configurationFelix Singer
Clean up by using is_devfn_enabled(). Change-Id: I9a4984a096e72025e161bf117b70a7c59f2bb094 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82118 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-02soc/intel/xeon_sp: Add device to proximity domain map utilsShuo Liu
In NUMA architecture, all devices (cpu, memory and PCI device) belong to specific proximity domain. Add utils to map device instance to their proximity domain. Proximity domain ID is the index assigned at the creation of proximity domains. There is no hard relationship between proximity domain ID and the device identities (e.g. socket ID). Hence we need the map utils to explicitly link them. For now the Sub-NUMA config isn't taken into account. TEST=Build and boot on intel/archercity CRB Change-Id: Icd14a98823491ccfc38473e44a26dddfbbcaa7c0 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81440 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-02soc/intel/xeon_sp: Make NUMA support by defaultShuo Liu
TEST=Build and boot on intel/archercity CRB Change-Id: I84f07c16e24e441a885144df8c805f1310acae29 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81439 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-02Doc/tutorial/part2.md: Format URL as linkAngel Pons
One URL in this document did not show up as a link. Fix it. Change-Id: I22bf2014e71e6a127a7981cc90a028e48c25da49 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82160 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30soc/intel/alderlake: Default to 512 for DIMM_SPD_SIZEFelix Singer
Alderlake and Raptorlake SoCs support DDR4 and DDR5, which have a total SPD size of 512 bytes. Set this as the default and remove the setting from mainboard Kconfigs. Change-Id: I8703ec25454a0cd55a3de70f73d2117285a833ae Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82115 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30drivers/intel/fsp2_0: Default to 64-bits for FSP 2.4Jeremy Compostella
Sets`PLATFORM_USES_FSP2_X86_32' to `n' by default if FSP 2.4 is enabled as 64-bits FSP should be norm moving forward. BUG=b:329034258 TEST=verified on Lunar Lake RVP board (lnlrvp) Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec98 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80323 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Usha P <usha.p@intel.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-30drivers/intel/fsp2_0: Add dedicated caller function for ap procedure callsAppukuttan V K
Add FSP 2 Multi Processor Platform Initialization module a function indirection to ensure that efi_ap_procedure functions are called with the appropriate C calling convention. BUG=b:329034258 TEST=Verified both x86_32 and x86_64 builds on Meteor Lake board (Rex) Change-Id: I64e65b2941207375d5e27c84aa26061e7e72a7f6 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81663 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-30drivers/intel/fsp2_0: Remove x64-specific assertion from fsp_headerAppukuttan V K
Same fsp_header struture is being used for x64 and x32 modes and hence dropping the x64 assertion. BUG=b:329034258 TEST=Verified on Meteor Lake board (Rex) Change-Id: I6013af342670e6377a3fe7641d7d9b52c9b6f57c Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81662 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Usha P <usha.p@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-30drivers/intel/fsp2_0: Make coreboot FSP stack 16-bytes alignedAppukuttan V K
- Stack alignment: 1. FSP functions must be called with the stack 16-bytes aligned in x86_64 mode.This is already setup properly with the default value of the `mpreferred-stack-boundary' compiler option (4). 2. The FSP heap buffer supplied by coreboot through the `StackBase' UPD must be 16-bytes aligned. This alignment is consistent for both x86_64 and x86_32 modes to simplify the implementation. BUG=b:329034258 TEST=Verified on Meteor Lake board (Rex) Change-Id: I86048c5d3623a29f17a5e492cd67568e4844589c Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81661 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2024-04-30mb/google/brya/var/xol: Add EC_IN_RW_OD config into early_gpio_tableSeunghwan Kim
Add GPP_F18 configuration in early_gpio_table. Without this, DUT cannot get the proper state of this signal on early phase. It allowed DUT to attempt to enter into dev mode when EC is in RW currently, it causes the failure of autotest/firmware_DevMode. BUG=b:337365524 TEST=built and run autotest firmware_DevMode Change-Id: I2179bb10b431547bc35f332c74915a63495b779d Signed-off-by: Seunghwan Kim <sh_.kim@samsung.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82099 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: YH Lin <yueherngl@google.com>
2024-04-30mb/google/brox: Add 20K pulldown to GPP_D14Shelley Chen
GPP_D14 is floating when ISH is not being used and wasting power. Add pulldown to prevent this from happening. BUG=b:336654954 BRANCH=None TEST=emerge-brox coreboot chromeos-bootimage make sure OS boots up HW team validated that power usage is 20 mW lower Change-Id: I4e19e98fa31022ece66a47402a2a4461b430ef70 Signed-off-by: Shelley Chen <shchen@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-29soc/intel/cmn/graphics: Make DDI-A 4 lanes configurableAngel Pons
As described in Intel document 336464 (8th gen S series datasheet volume 1), the CPU's 4 eDP lanes can be bifurcated, so that DDI-A (eDP) ends up with 2 lanes, and DDI-E (DP, typically used for VGA) has the remaining 2 lanes. This lets mainboards provide a VGA output without sacrificing one of the main 4-lane DDIs. Newer platforms seem to be lacking this. However, the way this is structured in coreboot does not allow boards to choose whether bifurcation should be enabled. Most boards in the tree do not use DDI-E (it doesn't exist on mobile platforms), but there are some boards (e.g. hp/280_g2) that use DDI-E and a DP-to-VGA converter chip to provide a VGA output. Replace `SOC_INTEL_CONFIGURE_DDI_A_4_LANES` with two new Kconfig options to allow boards to decide. Use `SOC_INTEL_GFX_HAVE_DDI_A_BIFURCATION` to specify whether a platform supports DDI-A bifurcation at all (do nothing otherwise, maintaining the original code's behaviour). If bifurcation is supported, the `SOC_INTEL_GFX_ENABLE_DDI_E_BIFURCATION` is used to clear or set the `DDI_A_4_LANES` bit in the `DDI_BUF_CTL_A` register. Change-Id: I516538db77509209d371f3f49c920476e06b052f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82113 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-29mb/hp/280_g2: Fix comment in `gma-mainboard.ads`Angel Pons
The DVI connector on this board is DVI-D (digital only), not DVI-I. Change-Id: I74c1257efb67cfdff2ae04a42c163dd320c850a4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82112 Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-04-29mb/google/brox: Fix the pad reset config for Touchpad interruptKarthikeyan Ramasubramanian
Update the pad reset config for Touchpad Interrupt from PLTRST to DEEP so that it can still act as a wake source during S3 suspend. BUG=b:336398012 TEST=Build Brox BIOS image and boot to OS. Suspend to S3 and wakeup using Trackpad. 246 | 2024-04-25 16:55:18-0700 | ACPI Enter | S3 247 | 2024-04-25 16:55:34-0700 | ACPI Wake | S3 248 | 2024-04-25 16:55:34-0700 | Wake Source | GPE # | 67 249 | 2024-04-25 17:00:38-0700 | ACPI Enter | S3 250 | 2024-04-25 17:00:47-0700 | ACPI Wake | S3 251 | 2024-04-25 17:00:47-0700 | Wake Source | GPE # | 67 Also suspend to S0ix and wakeup using Trackpad. Change-Id: If1a275e42c6c7ad743eedc9cd3320776008bfd62 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82067 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-29include/device/pci_ids.h, soc/intel/mtl: add new MTL-P iGPU DIDMichał Kopeć
Found in a Clevo V560TU with Intel Core Ultra 155H Change-Id: I0f10808fd0e2d9c122743615fbce656c6d2447cc Signed-off-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82071 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-29soc/intel/xeon_sp: Support CHIPSET_LOCKDOWN_FSPShuo Liu
In a server platform many silicon specific register lock operations are by default in FSP space. CHIPSET_LOCKDOWN_FSP provides an option to make sure the codes could be used out-of-box to build products. Change-Id: I8efcc1f27446be8e35f51e2568c4af6f8165486b Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82081 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-04-29MAINTAINERS: Add Granite Rapids FSP to Xeon-SPShuo Liu
Change-Id: I5170a69d798d0e8198b89f6932a80e6051228ac2 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82082 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-29mb/google/brya/xol: Add Fn key scancodeAseda Aboagye
The Fn key on Xol emits a scancode of 94 (0x5e). BUG=b:327656989 TEST=Flash xol, boot to Linux kernel, and verify that KEY_FN is generated when pressed using `evtest`. Change-Id: I34ed93d9666504bfd4d439e166911e49f58e5ff5 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82069 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-28acpi: Fix return value in acpi_device_write_dsd_gpio()Jianeng Ceng
Fix ++ as suffix and * precedence. After modification, the gpio index can be obtained correctly. The error was introduced in the commit making it public: commit 01344bce BUG=None TEST= Can get the correct index test on nissa. Change-Id: I7a3eb89633aaebebc8bd98ac6126c578fda23839 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82088 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dolan Liu <liuyong5@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-26util/docker/coreboot-sdk: Remove libcurl4 from the package listMichał Żygowski
When installing the packages, apt-get returns an error about holding broken packages. It occurs the diffutils depends on libcurl4t64 which breaks the libcurl4. As a solution, remove the libcurl4 from the list, and let the package manager resolve the dependencies. TEST=Build coreboot-sdk Change-Id: Iabc4f74619d4462317d8adb4068e50135d89d80e Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82066 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-04-26mb/framework: Push initial port of azalea (Framework 13 AMD 7040)Martin Roth
This is a minimal framework that allows the build to compile. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Ief4b5c75471a2ef5bedaaee9b4737510c2826b6e Reviewed-on: https://review.coreboot.org/c/coreboot/+/81978 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-04-26soc/amd/genoa_poc/chip.h: remove empty newline before '}'Felix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7f18f2d754f24bfcc9cbf95a98fa6fe40aaf3b02 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-04-26drivers/pc80/tpm: Disable device if TPM not presentMichał Żygowski
If the TPM is not detected in the system it may mean it is inactive due to enabled ME with active PTT. In such case, the chipset will route the TPM traffic to PTT CRB TPM on Intel systems. If TPM is not probed, disable the PC80 TPM device driver, so that coreboot will not generate improper SSDT ACPI table. Change-Id: I05972ad74a36abaafa2f17a16f09710550a3a3f3 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
2024-04-26drivers/crb: Disable device if CRB TPM not presentMichał Żygowski
If CRB TPM is not detected in the system it may mean it is inactive due to disabled or neutered ME. In such case, the chipset will route the TPM traffic to LPC/SPI on Intel systems. If CRB TPM is not probed, disable the CRB TPM device driver, so that coreboot will not generate improper SMBIOS/SSDT ACPI tables. Change-Id: Ie0928536d9042b1f680d585e1ca9ad2cadf0c8ef Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80454 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
2024-04-26mb/google/rex: remove duplicate config for karisYH Lin
Remove duplicate config entry CHROMEOS_WIFI_SAR as it is used at the baseboard. BUG=None TEST=emerge-rex coreboot Change-Id: Iabf0e490103c2097f3f033036839b77b5a0bb1b3 Signed-off-by: YH Lin <yueherngl@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81226 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-26arch/arm/armv7/exception.c: fix warnings of macros and functionsIntegral
Use better alignment attribute macro and add missing identifier names for function definition arguments. Change-Id: I1c5c33fc9210f068ff88c8d981f1a1c739890c9c Signed-off-by: Integral <integral@member.fsf.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82050 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-25vc/google/chromeos: Move RAMOOPS region creation to BS_DEV_INIT_CHIPSAnil Kumar
RAMOOPS memory region was being overwritten by coreboot bmp_load_logo() function. The CBMEM_ID_FSP_LOGO region created during bmp_load_logo() was overlapping with RAMOOPS space created earlier. This resulted in memory corruption of RAMOOPS buffer. To prevent this, the RAMOOPS region allocation is moved to BS_DEV_INIT_CHIPS phase from earlier BS_WRITE_TABLES phase of boot. BUG=b:332910298 TEST=build and boot coreboot image on google/rex HW. Check RAMOOPS CBMEM region creation using cbmem -l command Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Ibae06362cd80eacb16f6cf0eed8c9aa1fbfb2535 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82042 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eran Mitrani <mitrani@google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-04-25util/ifdtool: Add support for checking GPR0 statusTyler Wang
This patch adds support for the new command-line option `-c` to the ifdtool, which is able to check GPR0 (Global Protected Range) status. This patch also add helper function get_enabled_gprd() to get enabled GPR0 settings. It used in enable_gpr0() and is_gpr0_protected(). Developers can use ifdtool with '-c' option to check whether GPR0 is set to enabled or disabled in the binary file. BUG=none TEST=(1) > ifdtool -p mtl -E image-unlocked.bin -O image-lock.bin ... Value at GPRD offset (64) is 0x83220004 --------- GPR0 Protected Range -------------- Start address = 0x00004000 End address = 0x00322fff ... GPR0 protection is now enabled (2) > ifdtool -p mtl -c image-unlocked.bin GPR0 status: Disabled Value at GPRD offset (64) is 0x00000000 --------- GPR0 Protected Range -------------- Start address = 0x00000000 End address = 0x00000fff (3) > ifdtool -p mtl -c image-lock.bin GPR0 status: Enabled Value at GPRD offset (64) is 0x83220004 --------- GPR0 Protected Range -------------- Start address = 0x00004000 End address = 0x00322fff Change-Id: I6b3af973be784200b965a68e5f6b7737cba03ed7 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2024-04-25mb/google/brox/var/lotso: Add fw_config field for storagetongjian
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333494257 TEST=emerge-brox coreboot depthcharge sys-boot/chromeos-bootimage Change-Id: Idb62e3f37e1480979ae529692455beb533434520 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82056 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/nissa/var/glassway: Enable Wi-Fi sar table for Intel moduleDaniel_Peng
1.Enable CHROMEOS_WIFI_SAR flag to load a SAR table for Intel module. 2.Describe the FW_CONFIG probe for the settings on glassway. - WIFI_SAR_0 for Intel Wi-Fi module AX211 BUG=336051631 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I9e43081c93ef17291c5d55cf262a0f4d1497447b Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81781 Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25mb/google/brya/var/nova: Add initial configurationsKenneth Chan
Upload initial configuration for nova based on proto schematics. Memory: SAMSUNG 2G*4 K4U6E3S4AB-MGCL HYNIX 2G*4 H9HCNNNBKMMLXR-NEE BUG=b:328711879 TEST=FW_NAME=nova emerge-constitution coreboot chromeos-bootimage Change-Id: Ic9ff3ed2fb3a7f0f100385d0a0444d38fcff5c51 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
2024-04-25mb/google/nissa/var/yaviks: Add stop pin for G2 touchscreenWisley Chen
Add stop pin control for G2 touchscreen BUG=b:335803573 TEST=build and verified Touchscreen work normally Change-Id: I7e0bbc7722cdda6bcca0485009fcf8510b1f55e2 Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81971 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-25drivers/crb: Check for PTT before attempting to initialize CRB TPMMichał Żygowski
We can assume that platforms, which select HAVE_INTEL_PTT, will not have any other CRB TPM than PTT. Check whether PTT is available before forcefully initializing the TPM and selecting the CRB interface in the TPM configuration registers. Change-Id: If0ec6217b0e321b7d7a9410b70defde3c3195fc3 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80453 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michał Kopeć <michal.kopec@3mdeb.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-04-25mb/google/corsola/var/wugtrio: Add STA_ER88577 MIPI panelYang Wu
Add STA_ER88577 MIPI panel for Wugtrio. Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf BUG=b:331870701 TEST=emerge-staryu coreboot chromeos-bootimage BRANCH=corsola Change-Id: I279d431d80ca0770540d88e213d4aeafe77038ce Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82055 Reviewed-by: Xuxin Xiong <xuxinxiong@huaqin.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-25drivers/mipi: Add support for STA_ER88576 panelYang Wu
Add STA panel STA_ER88577 serializable data to CBFS. Datasheet: 2081101BH8028073-50E_Pre Spec_240424.pdf About the init code, we communicated with the vendor through the datasheet to confirm the writing method of each register value. BUG=b:331870701 TEST=build and check the CBFS includes the panel BRANCH=None Change-Id: I210b23b67fbc102c9926171f1c78f6824820e4b7 Signed-off-by: Yang Wu <wuyang5@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82054 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Yidi Lin <yidilin@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-24soc/amd/common/amd_pci_util.h: assign 0 to PIN_A in pcie_swizzle_pinFelix Held
Explicitly assign a value of 0 to the first value of the pcie_swizzle_pin enum. This won't change the behavior, but clarifies that the actual values of the enum elements matter. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I21850e21f859f2079f804d4344a1a11856b27d90 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82049 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-04-24soc/amd/common/amd_pci_util.h: rename bridge irq in pci_routing_infoFelix Held
Rename the 'irq' element of the pci_routing_info struct to 'bridge_irq' to better describe what it's doing. This struct element contains the number of the northbridge IOAPIC IRQ input the bridge IRQ is connected to signal power management or error reporting IRQs. Right now, coreboot doesn't put this information into the ACPI bytecode. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6410be673d15d6f9b5eb4c80b51fb705fec5b155 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82048 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-04-24arch/arm64: Extend cache helper functionsDavid Milosevic
This patch extends the cpu_get_cache_info function, so that additional information like size of cache lines can be retrieved. Patch was tested against the qemu-sbsa mainboard. Change-Id: If6fe731dc67ffeaff9344d2bd2627f45185c27de Signed-off-by: David Milosevic <David.Milosevic@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/79106 Reviewed-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-24mb/dell/optiplex_9020: Implement late HWM initializationMate Kukri
There are 4 different chassis types specified by vendor firmware, each with a slightly different HWM configuration. The chassis type to use is determined at runtime by reading a set of 4 PCH GPIOs: 70, 38, 17, and 1. Additionally vendor firmware also provides an option to run the fans at full speed. This is substituted with a coreboot nvram option in this implementation. This was tested to make fan control work on my OptiPlex 7020 SFF. NOTE: This is superficially similar to the OptiPlex 9010's SCH5545 however the OptiPlex 9020's SCH5555 does not use externally programmed EC firmware. Change-Id: Ibdccd3fc7364e03e84ca606592928410624eed43 Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81529 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-24mb/google/nissa/var/anraggar: Add cbj_sleeve to control mic jackJianeng Ceng
Add a new GPIO port cbj-sleeve for kernel driver to call. At the same time, a new rt5645 driver is added to replace the generic driver to parse gpio. After entering the system, it is pulled high by the kernel to enable the MIC function. BUG=None TEST=MIC function is normal Change-Id: I093be6a3e357aae389fcbe8291a9701c40b62e15 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81774 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-24drivers/i2c/rt5645: Add RT5645 amp driverJianeng Ceng
RT5663 is very old and it was used the hard code like RT53 or 10EC5663, which is the different series from RT5645/5650, it may caused some ambiguity. Because I2C generic driver dose not support dsd gpio setting, we declared the new rt5645 series driver for expansion. Add RT5645 AMP support. The kernel driver of 5650 is written in rt5645.c. Add acpi name cbj-sleeve-gpios for power gate GPIO. ALC5650 DataSheet Rev 0.93 Realtek upstream link: https://lore.kernel.org/all/20240404035747.118064-1-derek.fang@realtek.com/ Hide the device because of Microsoft Windows. BUG=None TEST=verified in anraggar and probe device rt5650 succeed ``` \_SB.PCI0.I2C3.RT58: Realtek RT5650 ``` Change-Id: I602fcc4dd8576043943f6e20884edc4703350320 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81773 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-23drivers/intel/fsp2_0: Support FSP 2.4 64-bitsJeremy Compostella
FSP 2.4 brings FSP 64-bits support which requires some adjustments in coreboot: FSP/UEFI uses the Microsoft x64 calling convention. Appropriate attribute has to be set to all functions calling or called by the FSP. BUG=b:329034258 TEST=verified on Lunar Lake RVP board (lnlrvp) Change-Id: If0397f5cc8d0f4f1872bd37a001fe42e0c37ec99 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80277 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com>
2024-04-23soc/intel/alderlake: Add Twinlake graphics device IDsSowmya V
Add the graphics device IDs for Twinlake platform based on Platform External Design Specification. Document ID: 645548 BUG=b:326901448 TEST=Build tivviks and verify the IGD IDs. Change-Id: Ide008d5c5302bd589784bc917a2610c42a0fdee4 Signed-off-by: Sowmya V <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82038 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-23mb/google/rex/var/deku: Update USB _PLD valuesTony Huang
Fix custom_pld for USB2-C2 and USB3-C3 with same PLD group. Update USB2-A4 PLD group token. USB2/USB3 Type-C Port C2 "ACPI_PLD_TYPE_C(BACK, CENTER, ACPI_PLD_GROUP(3, 1))" USB2/USB3 Type-C Port C3 "ACPI_PLD_TYPE_C(BACK, LEFT, ACPI_PLD_GROUP(4, 1))" BUG=b:320203629 BRANCH=firmware-rex-15709.B TEST= emerge-ovis coreboot Change-Id: Ieecf0f7dda671a421e4e4a4adbf83240fadd018d Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82036 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-04-23mb/google/rex/var/deku: Configure GPIOTony Huang
Set unused pin to NC internal PU 20K BUG=b:325674908 BRANCH=firmware-rex-15709.B TEST= emerge-ovis coreboot Change-Id: I78eddaa41c14721eeb6ff33a4cb15382853e430b Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82035 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-22soc/amd/phoenix/acpi: call acpi_add_opensil_tables in openSIL caseFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifdfdbf193bd96a6dda72a2f23d51925fd369aa01 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82013 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-04-22vc/amd/opensil/stub/ramstage: add acpi_add_opensil_tables stubFelix Held
In the non-stub openSIL coreboot glue code, this can be used to add the ALIB SSDT. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3ccd2e81211417ad4ac94f208572e0fa4e1cf97c Reviewed-on: https://review.coreboot.org/c/coreboot/+/82012 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-22cpu/intel/model_206ax: Allow to configure VR settingsPatrick Rudolph
Allow to set board specific CPU voltage regulator settings. The VR12 compatible voltage regulator for the CPU can be configured by two MSRs. Currently a default value is applied, which mimics the Intel reference code and is what the BWG suggest. However most board vendors fill in the actual VR parameters to support OC or ULV board variants. When the mainboard design is too different from the Intel reference design, not updating the VR settings might result in: - unstable system behaviour - limited turbo performance - excessive battery drain - no over-clocking capability This patch adds support to set the board specific current limit for Icc and Igfx. It also allows to adjust PSI1, PSI2 and PSI3, which are powerstates used by the VR, that consume less energy when the system is idle. Test on Lenovo X220 with full CPU load after 1 minute, compared to previous code with default settings: - Limiting PP0 max current below Iccmax results in less CPU performance. RAPL readings show that less power is drawn over time. - Limiting PP0 max current to Iccmax results in equal CPU performance. RAPL readings show that the same power is drawn over time. - Setting the PP0 max current to a value >> Iccmax results in equal CPU performance. RAPL readings show that the same power is drawn over time. - Updating the MSR at runtime has no effect. Change-Id: I59edab47fc4fbe0240e1dd7d25647f7549b4def2 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-22drivers/intel/fsp2_0: Introduce fsp print helper macrosAppukuttan V K
This patch introduces fsp print helper macros to print `efi_return_status_t' with the appropriate format. These macros are now used for fsp debug prints with return status efi_return_status_t is defined as UINT64 or UNIT32 based on the selected architecture BUG=b:329034258 TEST=Verified on Meteor Lake board (Rex) Change-Id: If6342c4d40c76b702351070e424797c21138a4a9 Signed-off-by: Appukuttan V K <appukuttan.vk@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81630 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-22acpigen_ps2_keybd: Add assistant key to linux,keymapAseda Aboagye
If the ChromiumOS EC indicates that the device has an assistant key, we should also add it to the generated linux,keymap binding. This commit simply does so by examining the keyboard capabilities reported by the EC. BUG=b:333088656 TEST=With a device that has an assistant key, flash AP FW and verify that the key is mapped to `KEY_ASSISTANT` in the Linux kernel using `evtest`. Change-Id: I217220e89bce88e3045a4fc3b124954696276442 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81996 Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2024-04-22device_util: Handle domain device in dev_get_domainShuo Liu
When the input device pointer pointing to a domain device, dev_get_domain returns the input device itself. TEST=Build and boot on intel/archercity CRB Change-Id: I3a278a8f573de95406ee256fba17767def4ad75d Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81957 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-04-22ec/google/chromeec: Do not fill TypeC ACPI device when UCSI is enabledPavan Holla
Do not fill the ACPI table entry associated with the cros_ec_typec driver once we switch to the UCSI kernel driver. Skip the ACPI entry if EC implements the UCSI_PPM feature, and the CBI flag to enable UCSI is set. BUG=b:333078787 TEST=emerge-brox coreboot chromeos-bootimage Cq-Depend: chromium:5416841 Change-Id: I67dff6445aa7ba3ba48a04d1df3541f880d09d0a Signed-off-by: Pavan Holla <pholla@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81967 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-04-22mb/google/nissa/var/craaskov: modify 6W and 15W DPTF parametersIan Feng
The DPTF parameters were defined by the thermal team. Based on thermal table in 330817690#comment33. Set 6w "tcc_offset" to "15" by fw_config. BUG=b:330817690, b:290705146 BRUNCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot chromeos-bootimage Change-Id: I19100d960919dc3087fd067c24659de467eea276 Signed-off-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81997 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2024-04-22arch/arm64: Add EL1/EL2/EL3 support for arm64David Milosevic
Currently, arch/arm64 requires coreboot to run on EL3 due to EL3 register access. This might be an issue when, for example, one boots into TF-A first and drops into EL2 for coreboot afterwards. This patch aims at making arch/arm64 more versatile by removing the current EL3 constraint and allowing arm64 coreboot to run on EL1, EL2 and EL3. The strategy here, is to add a Kconfig option (ARM64_CURRENT_EL) which lets us specify coreboot's EL upon entry. Based on that, we access the appropriate ELx registers. So, for example, when running coreboot on EL1, we would not access vbar_el3 or vbar_el2 but instead vbar_el1. This way, we don't generate faults when accessing higher-EL registers. Currently only tested on the qemu-aarch64 target. Exceptions were tested by enabling FATAL_ASSERTS. Signed-off-by: David Milosevic <David.Milosevic@9elements.com> Change-Id: Iae1c57f0846c8d0585384f7e54102a837e701e7e Reviewed-on: https://review.coreboot.org/c/coreboot/+/74798 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: ron minnich <rminnich@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-04-21security/tpm/tspi/crtm.c: Fix space required before open brace errorNaveen R. Iyer
Fix checkpatch error. Change-Id: I890fcfa4ad7b7abe032248b435271514e8e264f3 Signed-off-by: Naveen R. Iyer <iyernaveenr@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82001 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-20util/lint: Add lint rule to watch for Makefile.incMartin Roth
This should keep new makefiles from being named Makefile.inc. Change-Id: I4a47998e1c997b82b8a15319eae96cdc0de64e77 Signed-off-by: Martin Roth <gaumless@gmail.com> Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81857 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-04-20payloads/edk2: Add Kconfig to use LAPIC timerJean Lucas
Core 2 platforms have issues with HPET. Enable support to use the LAPIC driver so those machines actually boot and don't hang. The LAPIC is actually closer to the CPU than the HPET (on the PCH), which reduces access latency, leading to higher resolution of the timer. Tested on a Lenovo X200 with a Core 2 Duo. Change-Id: I33144d6c1c120e7faa47b99e8262b0997c45c9b9 Signed-off-by: Jean Lucas <jean@4ray.co> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82000 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-04-19ec/google/chromeec: Update ec_cmd_api.h and ec_commands.hPavan Holla
Generated using update_ec_headers.sh [EC-DIR]. The original include/ec_commands.h version in the EC repo is: b3b35d6433 PPM: Rename ucsi_disabled to ucsi_enabled The original include/ec_cmd_api.h version in the EC repo is: 562316a71e include: Add fingerprint host commands to ec_cmd_api.h BUG=b:333078787 TEST=cros build-packages --board brox \ chromeos-bootimage depthcharge coreboot TEST=cros build-packages --board brya \ chromeos-bootimage depthcharge coreboot BRANCH=none Change-Id: I94b509cd6ad8f24bfc3b44ef02633d06320f1e22 Signed-off-by: Pavan Holla <pholla@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81965 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2024-04-19mb/google/brox/variants/lotso: add missing hda_verb.hFelix Held
Commit 00b40090aecf ("mb/google/brox: Move hda verb to variant dir") introduces a variant-specific file for the HDA verb tables, which commit 1bf0c3f1897c ("mb/google/brox: Create lotso variant") was missing which caused the build to fail when both patches were submitted. To fix the tree, add this file to the newly created lotso variant. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8a85115a204d9d9447a58da71eb65b1de963023d Reviewed-on: https://review.coreboot.org/c/coreboot/+/82014 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-19mb/google/brox: Create lotso variantKun Liu
Create the lotso variant of the brox reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:333494257 BRANCH=None TEST=util/abuild/abuild -p none -t google/brox -x -a make sure the build includes GOOGLE_LOTSO Change-Id: I5939127f9e6abe5b792c0627d9d67e739b27083b Signed-off-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81817 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-04-19acpigen_ps2_keybd: Add Fn key to linux,keymapAseda Aboagye
Some devices may generate scancodes for the Fn key if they have one. If they do, we should add them to the linux,keymap binding. BUG=b:333096023 TEST=Flash DUT that emits a scancode for the Fn key, verify that it is mapped to KEY_FN in the Linux kernel using `evtest` when pressing the Fn key. Change-Id: Ie4daa64bc6b619392276d0b5f16e2d195d5bd68c Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81895 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2024-04-19mb/google/brox: Move hda verb to variant dirtongjian
Others variant boards might use diff HDA Codec, so move hda verb to brox variant dir. BUG=b:314702466 BRANCH=None TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage Device list: cat /sys/bus/hdaudio/devices/ehdaudio0D0/chip_name ALC256 cat /sys/bus/hdaudio/devices/ehdaudio0D0/vendor_name Realtek Headphone detection: evtest 8 Event: time 1713404716.656768, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 1 Event: time 1713404716.656768, -------------- SYN_REPORT ------------ Event: time 1713404722.802661, type 5 (EV_SW), code 2 (SW_HEADPHONE_INSERT), value 0 Event: time 1713404722.802661, -------------- SYN_REPORT ------------ Change-Id: Id987c248c37dc8bdc63be7a2513fa8997b5ddc33 Signed-off-by: tongjian <tongjian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81945 Reviewed-by: Poornima Tom <poornima.tom@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-19mb/asus/p8z77-m: Squelch PNP error about 2e.b irq 70Fabian Groffen
[ERROR] PNP: 002e.b 70 irq size: 0x0000000001 not assigned in devicetree Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I2231afd67031c963045b6e7930d239368c723aa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75142 Reviewed-by: Keith Hui <buurin@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-19mb/asus/p8z77-m: Disable deep sleepFabian Groffen
One can argue whether or not this is desirable, but disabling this means you cannot use power from the USB ports when the board shuts down, which is better controlled from an option, but at the very least disabled so as to replicate default vendor firmware behaviour. Disable deep sleep like it is disabled on all other variants. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: I660f2efebf197df055ee7b9c349e4c2b64bda6cf Reviewed-on: https://review.coreboot.org/c/coreboot/+/75139 Reviewed-by: Keith Hui <buurin@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-19mb/asus/p8z77-m: Enable Port 80 UARTFabian Groffen
Copied this bit from asus/p8z77-m_pro, without it a GRUB2 payload will get stuck in an endless loop showing Unknown key 0xff detected whenever there is an USB device (such as a keyboard) connected. In this mode GRUB2 is so busy showing this message repeatedly that no other keypress ever gets handled, and thus no other remedy is possible than a reset via mb pins and unplugging the USB device. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Iebd433e2762a69241257e1b4f859319536a8d8f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75138 Reviewed-by: Keith Hui <buurin@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-19mb/google/brox/var/greenbayupoc: Add fw_config field for storageEren Peng
Add STORAGE_UNKNOWN, STORAGE_UFS, STORAGE_NVME for storage fw_config field to prevent depthcharge build break. BUG=b:333325006 TEST=emerge-brox coreboot depthcharge with no errors Change-Id: I0e220787d6ac73ec8fa2469ed958981d0801920e Signed-off-by: Eren Peng <peng.eren@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-04-19acpi: Make acpi_device_write_dsd_gpio() publicJianeng Ceng
Make sure it can be used for other driver. At present, i2c_generic_write_gpio() is not suitable for being called by other drivers, so delete it, add acpi_device_write_dsd_gpio() to replace it, and make it public. BUG=None TEST= Build BIOS FW pass and it can be use for other driver. Change-Id: Ifb2e60690711b39743afd455c6776c5ace863378 Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81788 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-04-19soc/amd/glinda: Add support for A0 and B0 steppingsAnand Vaikar
Update the A0 and B0 stepping IDs in CPU table per the PPR document 57254 Rev 1.56 and 1.69 Change-Id: I0072f25f981ac7d5df2522594c8788bfabcbf24c Signed-off-by: Anand Vaikar <a.vaikar2021@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81887 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-19libpayload: Fix inl() return type mismatchSubrata Banik
Change `inl()` return type from `unsigned long` to `unsigned int` to match the function definition and ensure consistency across platforms. BUG=b:242829490 TEST=Compiled successfully in 32-bit and 64-bit modes. Change-Id: I681935665c8de9ee472ab72fe1ac2f5dcc0f2534 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81961 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2024-04-18device/device_util: Rename dev_get_pci_domainShuo Liu
In coreboot, domain indicates hardware units that provide/group resource windows, For Xeon-SP, domains are PCIe compatible and further function in many aspects, e.g. PCIe, CXL, IOAT, UBOX. Rename dev_get_pci_domain to dev_get_domain to align with coreboot concept and distinguish from Xeon-SP concept. TEST=Build and boot on intel/archercity CRB Change-Id: I51b18b30fb41038869ea1384b01091da31a895b9 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81554 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-18device/device_util: Use const qualifierPatrick Rudolph
Allows to use the function in more places that expect the struct device to be readonly. TEST=Build and boot on intel/archercity CRB Change-Id: Iac04fe6931a43070f6638b399adbff2ce64829c9 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81275 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-18mb/dell/optiplex_9020: Add support for TPM1.2 deviceMate Kukri
These machines come with a TPM1.2 device by default. It is somewhat obsolete these days, but there is no harm in enabling it. Change-Id: Iec05321862aed58695c256b00494e5953219786d Signed-off-by: Mate Kukri <kukri.mate@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81827 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-18mb/asus/p8z77-m: Disable WDT1Fabian Groffen
WDT1 is currently enabled but gives these errors: [ERROR] ERROR: Resource didn't fit!!! PNP: 002e.8 60 * size: 0x8 limit: fff io [ERROR] PNP: 002e.8 60 io size: 0x0000000008 not assigned in devicetree Therefore, just disable it, like it is disabled on all other variants. Signed-off-by: Fabian Groffen <grobian@gentoo.org> Change-Id: Ie33c219eae60f55d272b261480283a02c2d502e5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75144 Reviewed-by: Keith Hui <buurin@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-18sb/intel/bd82x6x/pch.asl: Remove GPIO configuration accessKeith Hui
Allowing access to change GPIO configuration from ACPI is asking for trouble. Kill it while nobody cares (yet). Access to mainpulate and blink GPIOs is maintained. Change-Id: Id80a7e2f815a58750623c133bb30e5ed84a6e2ed Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81924 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-04-18sio/nuvoton/nct6779d: Correct GPIOBASE virtual LDNKeith Hui
According to datasheet, the enable bit for direct I/O access to GPIO lines is at CR30[3] of LDN 8, not [0] as currently coded. Change-Id: Id2f997aebc36a2fcaa8c3763f324d3b288f785d2 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81926 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-18nb/intel/gm45: Call `mb_post_raminit_setup()` laterAngel Pons
The only implementations of `mb_post_raminit_setup()` in the tree are found in Lenovo ThinkPads. These boards use this function to toggle a SMBus mux, which makes the DIMM SPDs inaccessible. Given that the SPD data is needed in `setup_sdram_meminfo()` and that there are no other side-effects, simply move the call to `mb_post_raminit_setup()` after the call to `setup_sdram_meminfo()`. TEST=Verify SMBIOS Type 17 information for lenovo/x200 is correct. Change-Id: I46abffa48e7e0848f9346ce9c6498860e4ece2da Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81946 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-04-18nb/intel/gm45: Fill in memory infoAngel Pons
Fill in memory info so that coreboot can generate SMBIOS Type 17 tables. The S/N, P/N and module ID fields are only populated for DDR3. Change-Id: I92060ce05bdf0ca617a3383a2db1fdbd43df6fe4 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81861 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jean Lucas
2024-04-18mb/asus/p8z77-m[_pro]: Blink power LED during suspendKeith Hui
Set GPIO27 of PCH to blink before going to sleep. This blinks the power LED. Revert after waking up. Tested on p8z77-m. Power LED blinks in suspend. Change-Id: Ie1b40ae17fa2ef397585b86ac82730099b611dda Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81923 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-04-18sb/intel/bd82x6x/pch.asl: Break out GPIO blink fieldKeith Hui
Break out the individual bits of GPIO blink register as was done for GPIO level register. An upcoming patch will use this. Change-Id: I6f4749f60a9d569deba4b31f09f07a1321dabf4a Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81922 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-04-18mb/asus/p8z77-m[_pro]: Correct PCH GPIO configKeith Hui
According to a boardview, GPIO27 is connected to the front panel power LED, and should be output. It will be made to blink before entering S3 suspend in a follow-up. Change-Id: I7e47f63999e8c0bfbd37e3273d33c00bc035bcbb Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81921 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-04-18mb/google/nissa/var/glassway: Add SPD IDs for two new memory partsDaniel_Peng
Support Memory for Hynix H58G66AK6BX070 and Samsung K3KL9L90CM-MGCT in mem_parts_used list, and generate SPD ID for these parts. DRAM Part Name ID to assign H58G66AK6BX070 4 (0100) K3KL9L90CM-MGCT 5 (0101) BUG=b:335341310 BRANCH=firmware-nissa-15217.B TEST=Run command "go run ./util/spd_tools/src/part_id_gen/\ part_id_gen.go ADL lp5 \ src/mainboard/google/brya/variants/glassway/memory/ \ src/mainboard/google/brya/variants/glassway/memory/\ mem_parts_used.txt" Change-Id: Ic07ec36a8015ce6433196a93e894b818a515b954 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81955 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2024-04-18cpu/intel/microcode: Defer microcode patching until after DRAM initSubrata Banik
Follows Intel SoC recommendation to avoid potential cache contention issues during early (pre-DRAM) microcode loading. Source: MTL_ARL_Processor_Family_BiosSpec_Rev1p0 Document Number: 729384 BUG=b:330536271 TEST=Able to boot to ChromeOS. w/o this patch: [DEBUG] microcode: sig=0xa06a4 pf=0x80 revision=0x19 [INFO ] CBFS: Found 'cpu_microcode_a06a4.bin' @0x1d9c0 size 0x21400 in mcache @0xfef89680 [INFO ] VB2:vb2_digest_init() 136192 bytes, hash algo 2, HW acceleration enabled [INFO ] microcode: load microcode patch [ERROR] microcode: Update failed w/ this patch: [ERROR] Microcode Error: Early microcode patching is not supported due to NEM limitation Change-Id: I1e433f5bede036800b27900b4b13a399b4f45d6f Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81954 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-17sb/intel/ibexpeak: Drop USB3 settings from devicetreeKeith Hui
ibexpeak has no USB 3 capabilities. They were kept briefly when its devicetree structure was split from bd82x6x in commit ab4de83f4330 ("sb/intel/ibexpeak: Sever bd82x6x source dependency") to verify correctness. With that done, they can go. Change-Id: I6b847e1532d2e84a7b408a8858c8613b322d0373 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-04-17mb/google/brox: Enable SAGvAshish Kumar Mishra
Enable SaGv support for brox BUG=None BRANCH=None TEST=Boot brox with SAGv enabled and verify in fsp debug logs Change-Id: I80c44e7df1d75732c6982b27e44ecd6060b1b3f1 Signed-off-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81556 Reviewed-by: Krishna P Bhat D <krishna.p.bhat.d@intel.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-17util/crossgcc/buildgcc: Use Intel mirror for ACPICAFelix Singer
The binary hashes from GitHub releases are not stable. Use the Intel mirror. Change-Id: If3738b0cdab07c37ac1459a53e399e5de54435d5 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80721 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-04-17mb/google/brya: Enable UFS driver for edk2 payloadMatt DeVillier
Several brya-based boards use UFS for storage, so enable the edk2 UFS driver when using the edk2 payload. TEST=build/boot google/brya (banshee, craaskov), verify internal boot media functional with edk2 payload. Change-Id: I3dc018582e974bf73c7668f78da9b81eeb038c01 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81871 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-04-17mb/google/zork: Enable eMMC driver for edk2 payloadMatt DeVillier
Several zork-based boards use eMMC for storage, so enable the edk2 eMMC driver when using the edk2 payload. TEST=build/boot google/zork (morphius, vilboz), verify internal boot media (both eMMC and NVMe) functional with edk2 payload. Change-Id: Ib7e98f309594554dbcf1ddd875d47c89bd9e0e44 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-04-17payloads/edk2: Add Kconfig to enable AMD Picasso eMMC driverMatt DeVillier
Add a Kconfig to selectively enable the AMD Picasso eMMC driver recently added to MrChromebox's edk2 fork. When selected, will enable booting from AMD Picasso devices with eMMC storage. TEST=tested with rest of patch train Change-Id: I6536a6f243f6766b913e295afebcf5b965e4e969 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81892 Reviewed-by: Sean Rhodes <sean@starlabs.systems> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-17payloads/external: Call $(strip_quotes ) on prebuilt iPXE pathNico Huber
Currently, we keep the double-quotes from Kconfig, resulting in an invalid path. So just call `strip_quotes` like we do with all other paths from Kconfig. Change-Id: Ibcaa59be0fdd84d1fb9e061394fd9b0f7aa1830b Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81947 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-17ec/google/chromeec: Update EC headersAseda Aboagye
Generated using update_ec_headers.sh [EC-DIR]. The original include/ec_commands.h version in the EC repo is: 9fdd96bfc6 keyboard: Add support for a "Dictation" key The original include/ec_cmd_api.h version in the EC repo is: 562316a71e include: Add fingerprint host commands to ec_cmd_api.h Change-Id: I7ec965d07aa4cb1fe54916845780f342ea3debb9 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81932 Reviewed-by: Forest Mittelberg <bmbm@google.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-04-17mb/google/corsola: Add new board variant VeluzaFrank Wu
Add a new Krabby follower device 'Veluza'. BUG=b:333630131 BRANCH=corsola TEST=none Change-Id: Idedcbfbddd6d98a51cf28a0963d68f6d8c68382c Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81791 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-04-17mb/up/squared: Make mini PCIe port mode configurableReto Buerki
Add config choice menu and pad configuration to put Mini PCIe port into mSATA mode. The vendor firmware's "Chipset->Mini PCIe / mSATA Switch" option has been used together with the output of inteltool and intel2pm to deduce the exact pad configuration. Note: the vendor firmware does not autodetect the mode, and the default setting for the port is "Mini PCIe". Tested with Kingston SUV500MS120G mSATA SSD. Change-Id: Ic2da1dd4252ebb5e373bc65418e321f566d4c10f Signed-off-by: Reto Buerki <reet@codelabs.ch> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80261 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-04-17arch/x86: Prevent .text/.init overlap with older linkersSubrata Banik
Add Kconfig option `X86_BOOTBLOCK_EXTRA_PROGRAM_SZ` to reserve extra space, avoiding overlap between .text and .init sections when using older linkers (binutils 2.3x). Default is 1024 bytes (1 KiB) for ChromeOS, 0 otherwise. BUG=b:332445618 TEST=Built and booted google/rex (32-bit/64-bit). Change-Id: I019bf6896d84b2a84dff6f22323f0f446c0740b5 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81886 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-04-16mb/hp: Add Pro 3500 series (Sandy/Ivy Bridge)Joel Linn
This is another readily available (used market) system. Based on autoport. * All peripherals should work. * Automatic fan control as well as S3 are working. * The board was tested to boot Linux and Windows. EHCI debug is untested. * When using MrChromebox edk2 with secure boot build in, the board will hang on each boot for about 20 seconds before continuing. There are some quirks for doing the first flash, see the documentation. Change-Id: Idf793fe915096cf2553572964faec5c7f8526b9a Signed-off-by: Joel Linn <jl@conductive.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-04-16superio/fintek/f81866d: Fix UART numbersMaxim Polyakov
Change-Id: I996b8e56d943e26ab426f1802ada07cde805286d Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81915 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-04-16buildgcc: Match the string of downloading percentage more preciselyZheng Bao
The command "wget" prints some hyperlink with "%", which will be filtered in by previous regular expression. So we need to change to match the string with exactly 3 digits and a percent symbol. TEST: echo 45% | grep -o "\<[0-9]\{1,3\}%" 45% echo 1245% | grep -o "\<[0-9]\{1,3\}%" <empty> echo aa% | grep -o "\<[0-9]\{1,3\}%" <empty> Change-Id: I6ef9e7c87fd4ee6cc707346954d91e6e3af3b939 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/66743 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-04-16security/tpm: support compiling in multiple TPM driversSergii Dmytruk
Starting from here CONFIG_TPM1 and CONFIG_TPM2 are no longer mutually exclusive. Change-Id: I44c5a1d825afe414c2f5c2c90f4cfe41ba9bef5f Ticket: https://ticket.coreboot.org/issues/433 Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/69162 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 14:35:18 +0000