summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-07-03winbond/w83627dhg: Fix logical device power down in ACPINico Huber
The W83627DHG has some power managements bits to power down individual logical devices. These are called `* Power Down`. Counterintuitively and in contrast to `Immediate Power Down` (bit to power down the whole chip), these bits are set when the respective logical device is powered. Unfortunately, our ACPI code set them wrong which led to disabled devices after a S3 suspend/resume. Adding an option how to set the PM bits and setting them to zero for the W83627DHG, corrects it. Tested with kontron/ktqm77. Change-Id: I8a472d480d4277721bd17c9f7c2ce44fa84e8ae2 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3590 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-03pnp: Add some default functions to enter/exit config stateNico Huber
Implement some common default functions to enter and exit the configuration state. Also provide default pnp_mode_ops for common enter()/exit() function pairs. The following cocci ensures their use: @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; @ enter_match_8787 @ identifier mode_match.enter, dev; @@ enter(...) { outb(0x87, dev->path.pnp.port); outb(0x87, dev->path.pnp.port); } @ depends on enter_match_8787 @ identifier mode_match.enter, mode_match.ops; @@ struct pnp_mode_ops ops = { - .enter_conf_mode = enter, + .enter_conf_mode = pnp_enter_conf_mode_8787, }; @ enter_match_55 @ identifier mode_match.enter, dev; @@ enter(...) { outb(0x55, dev->path.pnp.port); } @ depends on enter_match_55 @ identifier mode_match.enter, mode_match.ops; @@ struct pnp_mode_ops ops = { - .enter_conf_mode = enter, + .enter_conf_mode = pnp_enter_conf_mode_55, }; @ depends on enter_match_8787 || enter_match_55 @ identifier mode_match.enter; @@ -enter(...) {...} @ exit_match_aa @ identifier mode_match.exit, dev; @@ exit(...) { outb(0xaa, dev->path.pnp.port); } @ depends on exit_match_aa @ identifier mode_match.exit, mode_match.ops; @@ struct pnp_mode_ops ops = { - .exit_conf_mode = exit, + .exit_conf_mode = pnp_exit_conf_mode_aa, }; @ depends on exit_match_aa @ identifier mode_match.exit; @@ -exit(...) {...} @ depends on enter_match_8787 || enter_match_55 || exit_match_aa @ @@ #include <device/pnp.h> +#include <superio/conf_mode.h> @ mode_match_55_aa @ identifier ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = pnp_enter_conf_mode_55, .exit_conf_mode = pnp_exit_conf_mode_aa, }; @@ identifier mode_match_55_aa.ops; @@ -struct pnp_mode_ops ops = {...}; @@ identifier mode_match_55_aa.ops, devops; @@ struct device_operations devops = { - .ops_pnp_mode = &ops, + .ops_pnp_mode = &pnp_conf_mode_55_aa, }; @ mode_match_8787_aa @ identifier ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = pnp_enter_conf_mode_8787, .exit_conf_mode = pnp_exit_conf_mode_aa, }; @@ identifier mode_match_8787_aa.ops; @@ -struct pnp_mode_ops ops = {...}; @@ identifier mode_match_8787_aa.ops, devops; @@ struct device_operations devops = { - .ops_pnp_mode = &ops, + .ops_pnp_mode = &pnp_conf_mode_8787_aa, }; Change-Id: I1480336b54523cc95210d99cf31c1a0b3a14b464 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3484 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2013-07-02Intel GM45, 945, Sandy Bridge: Unify `delay.c` and `udelay.c`Paul Menzel
Use the same indentation, comment placement and spelling of words. Run `indent -linux …`. Change-Id: Id5765c45b28058cdd50ee4c0a1fd9f645ad7f3f8 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3220 Reviewed-by: Nico Huber <nico.huber@secunet.com> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-02Make setting MAX_PIRQ_LINKs depend on NORTHBRIDGE_VIA_VX900Dave Frodin
The MAX_PIRQ_LINKS is defined in src/Kconfig with a default value of 4. The src/northbridge/via/vx900/Kconfig also defines MAX_PIRQ_LINKS with a default of 8 and it ends up giving us a value of 8 for non-VIA platforms. Change-Id: Iee1938d38a93ab7c35c8cb6fe9656a92cf3fa21e Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3586 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-01w83627hf: Add comments about parallel port modes in superio.aslChristoph Grenz
Add comments in PAR0._PRS explaining which dependent resource descriptor puts the parallel port into EPP or SPP mode. Change-Id: If4e224dbaf6f9105cde88d995d2e7c74fbf14502 Signed-off-by: Christoph Grenz <christophg+cb@grenz-bonn.de> Reviewed-on: http://review.coreboot.org/3495 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-07-01cbmem: Fix makefileStefan Tauner
The .dependencies rule did not use the CPPFLAGS variable which led to funny behavior: a spurious termination message the first time (after checkout/make distclean) one executes make. Afterwards the (wrongly) empty .dependencies file hides the problem and the binary is created anyway. $ make cbmem.c:37:34: fatal error: boot/coreboot_tables.h: No such file or directory compilation terminated. cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c cc cbmem.o -o cbmem $ make make: Nothing to be done for `all'. $ make clean rm -f cbmem *.o *~ $ make cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c cc cbmem.o -o cbmem $ make distclean rm -f cbmem *.o *~ rm -f .dependencies $ make cbmem.c:37:34: fatal error: boot/coreboot_tables.h: No such file or directory compilation terminated. cc -O2 -Wall -Werror -iquote ../../src/include -iquote ../../src/src/arch/x86 -c -o cbmem.o cbmem.c cc cbmem.o -o cbmem I fixed that by adding the CPPFLAGS variable to the .dependencies recipe, just like Stefan Reinauer did in Chromium (Ia9d2e10a3ef122f30d681d16c2291eb108ead835), hence the split sign-off for this tiny change. :) Change-Id: Icd11b146ad762cbdf9774630b950f70e1253a072 Signed-off-by: Stefan Reinauer <reinauer@google.com> Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3548 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-07-01beaglebone: Enable the clocks and pins for the configured UART.Gabe Black
Set up the pinmux to enable the pins and the clocks for whichever UART is currently configured. Change-Id: Iac13f16d9d84320555b99734ea83eafd0a2803fe Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3573 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-01am335x: Fix the address of the pinmux registers.Gabe Black
The pinmux register data structure describes a subset of the control module registers, but the address which pointed to the base of the pinmux registers was actually being set to the beginning of all the control module registers, not just those having to do with the pinmux. With this address fixed, the UART now works on the beaglebone black. Change-Id: I7c99b6f37d7da359af074127cd0c1a86fda2d9a0 Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3574 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-07-01usbdebug: Support i82801dx/ex southbridgeKyösti Mälkki
Tested on i82801dx system with board aopen/dxplplusu. Change-Id: I522455ac79c87b9b6fc9cd8c4dc0da3563dfbfad Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3381 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-07-01usbdebug: Unify Intel southbridge buildsKyösti Mälkki
EHCI controller enable is identical on the affected chipsets. Change-Id: I91830b6f5144a70b158ec1ee40e9cba5fab3fbc9 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3424 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-07-01usbdebug: Drop duplicates of EHCI BAR relocation codeKyösti Mälkki
All the additional work that needs to be done in EHCI BAR relocation is independent of the hardware platform and was functionally identical in all the copies removed. When USBDEBUG is not selected, PCI EHCI controllers use standard pci_dev_read_resources() call. With USBDEBUG selected, PCI EHCI controller's device_operations .read_resources is replaced with pci_ehci_read_resources() call, which in turn will replace the device_operations .set_resources call. The replacement for .set_resources reconfigures usbdebug driver side, and calls the original .set_resources to configure hardware side. Change-Id: I8e136a5da4efedf60b6dd7068c0488153efaaf8e Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3412 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-29AMD S3 resume: Add framwork to write bigger dataSiyuan Wang
This patch is based on 'AMD S3: Program the flash in a bigger data packet'[1] Some AMD south bridge can write bigger data when saving S3 info. In this patch, I use config 'AMD_SB_SPI_TX_LEN' to contral data size. AMD_SB_SPI_TX_LEN is defined in 'src/southbridge/amd/Kconfig' and then can be overridden in the Kconfig for specific southbridges that support larger size. I have tested on AMD Parmer and Thatcher. We will release a new board whose south bridge can transfer more than 4 bytes each time. [1] http://review.coreboot.org/#/c/2306/ Change-Id: Id984955d46eae487e39d45979f1a90054aa9f54b Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3413 Tested-by: build bot (Jenkins) Reviewed-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-28ELOG: Fix warning to fix the compilation.Denis 'GNUtoo' Carikli
Without that fix we have: src/drivers/elog/elog.c: In function 'elog_is_header_valid': src/drivers/elog/elog.c:213:3: error: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int' [-Werror=format] Change-Id: I71b80a94c03a04eedb688ae107d92c05a878315e Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3551 Reviewed-by: Nico Huber <nico.huber@secunet.com> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2013-06-28libpayload: Add strerrorStefan Tauner
Change-Id: I33d45ad7d09473b8c6f5b7ee5fbadc0d184f9dcd Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3537 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-06-28Drop WARNINGS_ARE_ERRORS exceptionsStefan Reinauer
Thanks to Bruce's great work, we can finally drop this workaround. Change-Id: Ie92d1e53ef867fa34aa2489ccfb682d73195b213 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3569 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-28Supermicro H8SCM/H8QGI: Increase size of bus variable to meet APIBruce Griffith
Users of mptable_write_buses() pass two pass-by-reference parameters reflecting a maximum bus number and a search bus number. These bus numbers are expected to be held in "int" variables and are updated by the function. Both of the Supermicro boards define the search bus number as a byte value in mptable.c. For now, change the two Supermicro boards to use "int" to hold the search bus index. Change-Id: Ie71850719c1fa3cda0ac9c8773bb80650de95c70 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3546 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28AMD Dinar: Eliminate warnings (initializers/prototypes/unused var)Bruce Griffith
Fix a bunch of compiler-generated warning messages. These fixes are mainly braces for grouping initializers. These changes are not intended to change any code functionality. There are two changes where function prototypes are added, and two cases where unused variables are eliminated. Change-Id: I93cef8899170b5575e7fb7c55181b381a7bcd9d8 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3545 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28AMD SB700 boards: Set Azalia configuration flagsBruce Griffith
The existing code for setting Azalia configuration assumes that the configuration bits are contiguous within a single byte and can be set using a byte copy addressed into the lowest 2-bit subfield. The fix in Family 14 defines a union that can be addressed as a byte to overlay the bit fields. Since the offset of the four subfields is not necessarily fixed, change the code to initialize each of the four subfields individually. Change-Id: I1dff20bb8bd3e1bcd8b4e6b0537e20779d2a3521 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3544 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28supermicro/h8scm: Add a type cast for printk to correct a warning messageBruce Griffith
Copy a type cast from the other cases of the same switch statement to eliminate compiler warning messages. Change-Id: I8d0a88892f6a5f8e43227ab5f830041894b07f6a Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3543 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28Dinar, H8SCM, H8QGI: Add prototype of get_bus_conf()Bruce Griffith
On Dinar, H8SCM, and H8QGI, add <cpu/amd/amdfam15.h> as an include to pick up the prototype definition of get_bus_conf(). Change-Id: Ie4887670ac52aa194745881362df19cd1d75773e Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3542 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Zheng Bao <zheng.bao@amd.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28amd/cimx/sb700/late.c: Add type cast to (UINT8)Bruce Griffith
This change inserts a type cast to eliminate a compiler warning. Change-Id: If223f61f1565caeadb1b7e0762975b1b2412eda5 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3541 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28amd/cimx/rd890/amd.h: Eliminate redefinition of NULLBruce Griffith
This change replaces a redefinition of NULL with the standard definition from <stddef.h> to eliminate a compiler redefinition warning. Change-Id: I441fa569f545c0efb00284b5ee58aa27cb6617ba Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3540 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28amd/agesa/family15/northbridge.c: Delete unused variableBruce Griffith
This change eliminates an unused variable that causes a build warning. Change-Id: I02487c7dd80d458f562d7afe1827eefcc0fb678b Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3526 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28Add support to enable/disable builtin GbE (again)Stefan Reinauer
This requires a new system agent binary (v6 / v11 on haswell). Note that the existing system agent binaries are long time obsolete and won't work with current coreboot, so this update is overdue. Change-Id: I48d8649576ca84d2b85ab082ce06f3462e189059 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3568 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-28amd/agesa/f15/Lib/amdlib.c: Add missing breaks to switch statementBruce Griffith
Static analysis often flags case statements that do not include a terminating "break;" statement. Eclipse's CODAN is an example of this. This changelist modifies amdlib.c to terminate case statements with "break;". Change-Id: I3d43acaf64e2e2d9717421cb547fec35e582cf8b Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3539 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28amd/agesa/f15/Proc/CPU: Add length modifier to eliminate compiler warningsBruce Griffith
This change adds length modifiers to constant values to eliminate compiler warning messages. Change-Id: I032cb37cec788e2b5f79f5bbf9efc19a7892dc14 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3538 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28vendorcode/amd/agesa/f15: Eliminate compiler warningsBruce Griffith
This change is mostly type casts to eliminate compile time warnings. These specific changes are mostly cherry-picked from AMD Family 14 code and, as such, contain artifacts copied over from F14. For example, there are a number of UINT64 casts that are commented out rather than removed. This is to maintain consistency between AGESA versions. Ultimately, this is in preparation for turning on warnings as errors for AMD Family 15 server parts. Change-Id: Ic73d0b6ebab18d97015a9dd1130aff4e5e432fb7 Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com> Reviewed-on: http://review.coreboot.org/3525 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28Update 3rdparty mark to latest repositoryStefan Reinauer
For new systemagent v6 binaries. Change-Id: I550533fd19c7c5592f3e3c9b514efe2750619c8f Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3567 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-28gitmodules: Fix 3rdparty updatesStefan Reinauer
Commit 039223a: gitmodules: Ignore 3rdparty in "diff family" changed the behavior of our 3rdparty repository and disallowed updates to the checked out hash. Instead of "ignore=all" we want "ignore=dirty" to ignore local changes but allow changing to the HEAD of the 3rdparty repo. Change-Id: I66c35ad4fcfb0efb0ba611f67648a096a6de1479 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: http://review.coreboot.org/3566 Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Tested-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-27libpayload: Add more integer limitsStefan Tauner
Change-Id: If0963237806804a2a9d7f622c33013321379a04d Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3536 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-27libpayload: Fix whitespace errorsStefan Tauner
Change-Id: Ibc36988745cbc7ede2a00da376b5dd295014ffb1 Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3535 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Nico Huber <nico.huber@secunet.com> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-27Revert "Add support to enable/disable builtin GbE"Kyösti Mälkki
This reverts commit d358a506c4230950e34d783bd0187cd200d60691 http://review.coreboot.org/#/c/3514/ comments: The pei_data version changed to 6, so new binaries are needed. However, demand for new binary blob is not referenced with this commit nor is git submodules hash updated. Also the new binary blob almost doubles its size and no longer fits in the allocation sandybridge defines. Change-Id: I84eb70517d5b9278c611fdfa587a71f6ca0f657f Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3553 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-26libpayload: Use longer delay in tinycurses' wgetch()Nico Huber
The counted delay of 1ms was shorter than the time usb_poll() took (~30ms observed). So with a given timeout of 100ms it actually took 3s. We can lower the problem if we delay 10ms per loop iteration. Change-Id: I6e084bdd05332111cc8adcd13493a5dfb4bc8b28 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3533 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-25bd82x6x: Fix early USB BAR programming (finally?)Nico Huber
The xHCI controller's MMIO space has a length of 64KiB not 4KiB. Therefore, setting the xHCI BAR to 0xe8001000 worked the same like setting it to 0xe8000000, as bit12 is reserved and ignored. This again interfered with the MMIO space of the first EHCI controller and broke S3 resume on Ivy Bridge. AFAIK, the MRC ignores the setting of the xHCI BAR, anyway. So just drop these lines. Change-Id: I8af9c2ba34133f15636a9056fc8880b3b6ab95e0 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3521 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-25ktqm77: redesign cmos.layout slightlyPatrick Georgi
BIOS write protects 8 bytes of CMOS, which nvramtool can't cope with. This makes initial installation harder, so just mark those as reserved to work around the issue. Change-Id: I210861dff8572e226a0f250556a3b811671ea8f2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3531 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-25libpayload: Make lpgcc wrapper usable for in-tree buildsPatrick Georgi
Teach lpgcc to look in the in-coreboot tree directory structure, too. Change-Id: I3809456d072ce2f91542b0edb3fd39f536298cc2 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3530 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-25Vortex86EX northbridge.c : Remove Vortex86DX PCI N/B related code.Andrew Wu
6021 is Vortex86DX northbridge PCI device ID, not for Vortex86EX. Change-Id: I9bea799c9033adbcfacc8ad47052280a32f9ee59 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3529 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-25sandybridge: Make inclusion of me.bin optionalNico Huber
Current build configuration always wants to include an Intel Management Engine firmware (me.bin) on Sandy Bridge systems. However, we can have a working coreboot without it, as long as the factory delivered ME firmware is kept untouched in the flash ROM. So let the user decide if a ME firmware will be included in the build. Change-Id: I9a1cc29d4940ba22355eb9e653606e436f07e04c Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3522 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-25intel/sch: Use MMCONF_BASE_ADDRESSKyösti Mälkki
For iwave/iWRainbowG6 using intel/sch, MMCONF_BASE_ADDRESS was unused and different from hardware setting. Change that to match hardware programming. Change-Id: I3324b7ea0e6f092206d4b6b791476d538e826657 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3507 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-25abuild: Add xgcc tools to the pathMarc Jones
abuild checks the path for toolchains prior to building a mainboard. It didn't check xgcc/, which would be picked up by the coreboot make, and fail to build when it shouldn't. Change-Id: If0ca4238e8c57a6b015fdad623ccdbf237ef1ba6 Signed-off-by: Marc Jones <marc.jones@se-eng.com> Reviewed-on: http://review.coreboot.org/3350 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-24ifdfake - Create an IFD with just a section layoutNico Huber
This new tool called `ifdfake` just creates an empty Intel Firmware Descriptor (IFD) and writes the IFD signature plus the section layout given on the command line. usage: ifdfake [(-b|-m|-g|-p) <start>:<end>]... <output file> -b | --bios <start>:<end> BIOS region -m | --me <start>:<end> Intel ME region -g | --gbe <start>:<end> Gigabit Ethernet region -p | --platform <start>:<end> Platform Data region -h | --help print this help <start> and <end> bounds are given in Bytes, the <end> bound is inclusive. All regions must be multiples of 4K in size and 4K aligned. The descriptor region always resides in the first 4K. An IFD created with ifdfake won't work as a replacement for a real IFD. Never try to flash such an IFD to your board! The output of ifdfake can be utilized to build an image with just the later added sections (like coreboot itself) being valid. The resulting image can then be partially written to a machines flash ROM to just update coreboot (i.e. the BIOS section). Change-Id: I925b47cab5c6d490a79d684bdd7a7a45ac442640 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3523 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-24kontron/ktqm77: New boardNico Huber
Change-Id: Ife1c0a8597c2de04773899cdd87af6b6c630906a Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3392 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-24sandybridge: Make build possible without descriptor.binNico Huber
On newer Intel systems, the flash ROM is shared between the host processor (BIOS), it's Management Engine (ME) and an integrated ethernet controller (GbE). The layout of the flash ROM (and other information) is kept in the so called Intel Firmware Descriptor (IFD). If we only want to build coreboot to update the BIOS section, all we need is the flash layout. This patch adds the option to specify the flash layout in the mainboard's Kconfig, and thus, to build without the real IFD. However, with such a build, one has to make sure that the IFD section on the flash ROM won't be written over (nor any other section that hasn't been included by coreboot). A patch to write selected sections of a flash ROM with IFD has been sent to the flashrom mailing list [1]. [1] http://www.flashrom.org/pipermail/flashrom/2013-June/011083.html Change-Id: Ia23e439a00a197fb54852263f8e206f16c3e8851 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3524 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-24AMD: Drop empty root_complexKyösti Mälkki
There are no files to build left under AMD nortbridge/x/root_complex directories. For some cases, even the Kconfig file was no longer sourced. Remove all such references and empty files. For devicetree.cb treat component paths with "/root_complex" in them valid even when the directory does not exists. This is because AMD boards us this dummy chip component as the root node in their devicetree.cb. The generated devicetree file static.c remains unchanged. Change-Id: I9278ebb50a83cebbf149b06afb5669899a8e4d0b Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3434 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-24Asus F2A85-M: Add IRQs for IOMMURudolf Marek
The IOMMU needs IRQs assigned. So add those. Change-Id: Ic9f02e28aac593cddf7d222a8abb780a10572d32 Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3318 Tested-by: build bot (Jenkins) Reviewed-by: David Hubbard <david.c.hubbard+coreboot@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-24AMD Fam15tn: Add support for AGESA runtime allocation in CBMEMRudolf Marek
The IOMMU AGESA needs a reserved scratch space and it wants to allocate the stuff for runtime. So provide a simple allocator for 4 KB CBMEM page. Change-Id: I53bdfcd2cd69f84fbfbc6edea53a051f516c05cc Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Reviewed-on: http://review.coreboot.org/3315 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-24AMD Fam15tn: Add IOMMU BAR allocation to northbridgeRudolf Marek
For IOMMU we need to allocate a 512 KB BAR in a non-standard location. Use the standard allocator for that and limit the BAR to 32-bits to be compatible with older systems. Change-Id: I44414ce6b264b7f1c086a9b1c7ea275a0830205e Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3314 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-23lynxpoint: Fix early EHCI BAR programmingKyösti Mälkki
LynxPoint LP has only EHCI controller #1. Change EHCI #2 to different BAR from EHCI #1. Even if the ECHI controllers are not to be addressed, it is bad idea to set two different devices to claim the same PCI memory cycles. Change-Id: I95c59fb9d5f09afd152872e9bc0418dc67e4aeb2 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3472 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-23inteltool: add initial support for NehalemStefan Tauner
Also, add pretty printing of Westmere's DMI registers (tested on my t410s by staring at non-zero output values :) Apparently Nehalem does not have a MEMBAR? But there are some documented memory controller control registers in PCI configuration space... left out for now. The PCIEXBAR is not documented publicly AFAICT, but there is a similar register on a device on bus 0xFF. phcoder might know more... Change-Id: I5faadb6e4f701728f5290276c02809b4993bd86d Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3505 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-23AMD boards: routing.asl: Uniformly start `Package()` with capital letterPaul Menzel
In commit Rudolf Marek discovered, that it is not uniformly written. As »ASL names are not case-sensitive and will be converted to upper case.« [2] this change does not have any functional change. The following command was used to create this patch. $ git grep -l 'package()' src/mainboard | xargs sed -i 's,package(),Package(),' [1] http://review.coreboot.org/#/c/3318/ [2] http://www.acpi.info/spec40a.htm (18.2.1 ASL Names) Change-Id: I1784dbc50936a1ef9d4376209a3c324ef1fb85cf Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: http://review.coreboot.org/3516 Tested-by: build bot (Jenkins) Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-22intel/sandybridge: Locate CBMEM TOC early in ramstageKyösti Mälkki
This patch allows the use of migrated CAR_GLOBAL variables from the very beginning of ramstage. Without the patch, CAR_GLOBALS were not available until northbridge set_resources(). Change-Id: Ifd4ab2ed52e07dcbe8c77e2e460dc483323e93c0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3513 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-22Do CAR variable migration only onceAaron Durbin
Non-S3 resume paths of sandy/ivybridge call cbmem_initialize() more than once. Doing car_migrate_variables() more than twice caused at least loss of some lines in CBMEM console. Change-Id: Idd14aba9384984aa3a7d38937a4b3572aa5dc088 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3512 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@google.com>
2013-06-22Add support for DMP Vortex86EX PCI northbridge.Andrew Wu
Change-Id: I60675a357f9db430ebb59b17be6d8c92a9cadf43 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3511 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-22qemu-i440fx: Make it compile with CONFIG_DYNAMIC_CBMEM.Denis 'GNUtoo' Carikli
This commit was tested on qemu with and without CONFIG_DYNAMIC_CBMEM by running cmbmem -c once booted. The qemu command that was used was: qemu-system-i386 -bios ./build/coreboot.rom -serial stdio -hda ../virt/parabola.img Note that using CONFIG_RELOCATABLE_RAMSTAGE make it fails like that: Loading image. CBFS: Decompressing stage fallback/coreboot_ram @ 0x3ffbefc0 (184400 bytes) Loading module at 3ffbf000 with entry 3ffbf000. filesize: 0x18db8 memsize: 0x2c050 Processing 1703 relocs with adjust value of 0x3ffbe000 FATAL: Essential component is missing. However without CONFIG_RELOCATABLE_RAMSTAGE set it boots fine. Change-Id: I633a8c3832eee4e8bed244940fdc370b98dd26f0 Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3504 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-21Add support to enable/disable builtin GbEStefan Reinauer
In case we are going to use this in future designs. BUG=none TEST=none BRANCH=none Change-Id: I750addf10e4fe6f8240f8c8262253f8af7027e29 Signed-off-by: Stefan Reinauer <reinauer@google.com> Reviewed-on: https://gerrit.chromium.org/gerrit/55844 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: http://review.coreboot.org/3515 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-21Dynamic cbmem: don't compile src/lib/cbmem.c when dynamic cbmem is selected.Denis 'GNUtoo' Carikli
src/lib/cbmem.c is for the static cbmem. Thanks to adurbin for the Makefile.inc pointer and code on #coreboot IRC channel on freenode: <adurbin> no. if you have CONFIG_DYNAMIC_CBMEM then cbmem.c shouldn't be compiled [...] <adurbin> +ifeq ($(CONFIG_EARLY_CBMEM_INIT),y) <adurbin> +ifneq ($(CONFIG_DYNAMIC_CBMEM),y) romstage-$(CONFIG_EARLY_CBMEM_INIT) += cbmem.c <adurbin> +endif <adurbin> +endif Without that fix we have: src/lib/cbmem.c:58:43: error: no previous prototype for 'get_cbmem_toc' [-Werror=missing-prototypes] src/lib/cbmem.c:76:6: error: no previous prototype for 'cbmem_init' [-Werror=missing-prototypes] src/lib/cbmem.c:107:5: error: no previous prototype for 'cbmem_reinit' [-Werror=missing-prototypes] This commit was tested on qemu-i440fx with the following commit: qemu-i440fx: Make it compile with CONFIG_DYNAMIC_CBMEM ( http://review.coreboot.org/#/c/3504/ ). Change-Id: I98636aad4bb4b954f3ed3957df67c77f3615964a Signed-off-by: Denis 'GNUtoo' Carikli <GNUtoo@no-log.org> Reviewed-on: http://review.coreboot.org/3503 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-21bd82x6x: Fix early EHCI BAR programmingKyösti Mälkki
Change EHCI #2 to different BAR from EHCI #1. Even if the ECHI controllers are not to be addressed, it is bad idea to set two different devices to claim the same PCI memory cycles. Change-Id: Ib6f7cfac5acf3f8170508547d1584af90273e8c1 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3471 Tested-by: build bot (Jenkins) Reviewed-by: Nico Huber <nico.huber@secunet.com>
2013-06-20fix bootstate typo (bs_dev_eanble -> bs_dev_enable)David Hendricks
Change-Id: I2e3fd58404c48e863a3a1b255337fb397086651b Signed-off-by: David Hendricks <dhendrix@chromium.org> Reviewed-on: http://review.coreboot.org/3506 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-20Add initial support for DMP Vortex86EX CPU.Andrew Wu
Change-Id: I74de250c69a57109362be1b2f00c0b4aa24a64e8 Signed-off-by: Andrew Wu <arw@dmp.com.tw> Reviewed-on: http://review.coreboot.org/3473 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-20sandybridge: Store MRC cache in CBFSPatrick Georgi
Location is hard-coded right now, which isn't optimal. It must be chip erase block aligned, which might fail on some flash chips (it's 64k aligned which should work for most cases). Change-Id: I6fe0607948c5fab04b9ed565a93e00b96bf44986 Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3497 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
2013-06-19lenovo/t60: Collect timestamps in romstageNico Huber
Collect early timestamps in T60's romstage like some newer boards do. This should also work on X60s (and other ICH7 based systems with EARLY_CBMEM_INIT). Change-Id: I3b2872dd7423f3379ff3b68ad999523ec35fc08e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3499 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19intel/i82801gx: Store initial timestampNico Huber
Upgrade the ICH7 bootblock to store an initial timestamp like we do it since Sandy Brigde. I've checked the datasheets for the used scratchpad registers and grepped for their usage. I'm pretty sure that they aren't used on any ICH7 based board (for anything before the usual S3-resume indication). Change-Id: I28a9b90d3e6f6401a8114ecd240554a5dddc0eb5 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3498 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19qemu: complete bochs dispi interface vga driver.Gerd Hoffmann
Ditch unused fb*.h files. Rename init.c (name is _way_ to generic) to bochs.c. Add proper bochs dispi interface detection and mode setup. Hook up coreboot framebuffer table initialization. Change-Id: I7154b1593902e7d42606b64819217872eee10683 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3500 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-19edid: fix warningGerd Hoffmann
src/lib/edid.c:1177: error: ‘y’ may be used uninitialized in this function Warning is bogus, but seems my gcc (4.4.7 as shipped by RHEL-6) isn't clever enougth to figure this on its own. So help a bit by explicitly initializing the variable. Change-Id: Ia9f966c9c0a6bd92a9f41f1a4a3c8e49f258be37 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3501 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-18libpayload: ahci: Increase timeout for signature readingNico Huber
We can't read the drives signature before it's ready, i.e. spun up. So set the timeout to the standard 30s. Also put a notice on the console, so the user knows why the signature reading failed. Change-Id: I2148258f9b0eb950b71544dafd95776ae70afac8 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3493 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-18winbond/w83627dhg: Correct resource setting for SPI (LDN6)Nico Huber
The SPI logical device on the W83627DHG uses the second i/o port register pair but not the first one. So we have to also set `io1` (the second io_info struct) and not `io0` in the pnp_info structure. Setting the PNP_IO1 flag without a mask in `io1` caused coreboot to hang in pnp_enable_devices() until commit aeead274 which added a check for an unset mask. Change-Id: I027d279b4641fecd88afb14d40fbe1c0bfbf81bb Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3391 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-18qemu/q35: uncomment cache-as-ram Kconfig entriesGerd Hoffmann
Change-Id: I8371764e3f2d16a3a776beb1c064f461b20a4262 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3496 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17am335x: Add pinmux support based on the functions in U-BootGabe Black
I was unable to find documentation that said what mode numbers correspond to what functionality, so I translated over what U-Boot does. Change-Id: I34fab0f024fa2322d6bb66106aed75224e67354d Signed-off-by: Gabe Black <gabeblack@chromium.org> Reviewed-on: http://review.coreboot.org/3489 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17AMD southbridges: Move HAVE_HARD_RESETKyösti Mälkki
All 3 boards with AGESA_HUDSON had HAVE_HARD_RESET with the reset.c file already placed under southbridge/. All 15 boards with CIMX_SBx00 had HAVE_HARD_RESET with functionally identical reset.c file under mainboard/. Move those files under respective southbridge/. Change-Id: Icfda51527ee62e578067a7fc9dcf60bc9860b269 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3486 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD: Use same sourcecode for reset in romstage as ramstageKyösti Mälkki
Confusingly, romstage compiled in different copy of soft_reset() than ramstage. Use source in reset.c for both. Change-Id: I2e4b6d1b89c859c7cf5d9e9c8f7748b43d369775 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3487 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17AMD boards: Clean use of Kconfig optionsKyösti Mälkki
The chip component is unconditionally selected for the mainboard so these uses are superfluous. Change-Id: I84b053ab47f7b1f68e88d968cf305e24bc95f4da Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3485 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17Add support for XHCI (USB 3.0)Dave Frodin
CONFIG_HUDSON_XHCI_ENABLE will control the XHCI flags in the amd/parmer and asus/f2a85-m mainboards. The XHCI ports on amd/thatcher are not wired to USB jacks so always disable the flags. This was tested on amd/parmer using a USB 3.0 thumbdrive. Change-Id: I596b040fec30882d8d4dee34ab9f866dc1f8896b Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3465 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17AMD Hudson: Add config option to enable XHCIDave Frodin
To have USB 3.0 support the XHCI controller needs to be enabled and the xhci.bin firmware needs to be added to CBFS. Change-Id: I0b641b30b67163b7dc73ee7ae67efe678e11c000 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3464 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Remove now plain wrappers for default PnP functionsNico Huber
After removing the enter()/exit() functions for configuration mode, most wrappers for our standard PnP functions just call the underlying default implementation. Remove those with a little cocci: @ op_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; type device_t; identifier dev; @@ static void op(device_t dev) { pnp_op(dev); } @@ identifier op_match.op; @@ -op(...) {...} /* Three rules to match the alignment, hmmp... */ @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .set_resources = op, + .set_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable_resources = op, + .enable_resources = pnp_op, }; @@ identifier op_match.op, op_match.pnp_op; identifier ops; @@ struct device_operations ops = { - .enable = op, + .enable = pnp_op, }; Change-Id: Idc0e52c7e3600a01f3b6a4e17763557b271b481e Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3483 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Register implementations of enter/exit config stateNico Huber
Find all the (ramstage) implementations of enter()/exit() functions for the configuration state, register and call them through the new struct pnp_mode_ops. As our standard PnP functions are aware of the pnp_mode_ops, it's not necessary to call enter()/exit() around them anymore. Patch generated with the cocci below. It's not perfect. The movement of the enter()/exit() calls is somehow fragile. So I checked the remaining calls for sense, and changed some empty lines. Also a duplicate insertion of pnp_conf_mode_ops had to be removed. /* Try to find enter and exit functions by their outb() structure and their usage around calls to our standard pnp functions: */ @ enter_match @ identifier enter; identifier dev; type device_t; @@ void enter(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ exit_match @ identifier exit; identifier dev; type device_t; @@ void exit(device_t dev) { <... outb(..., dev->path.pnp.port); ...> } @ pnp_match @ identifier op; identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; identifier enter_match.enter, exit_match.exit; type device_t; identifier dev; @@ void op(device_t dev) { ... enter(dev); ... pnp_op(dev); ... exit(dev); ... } /* Now add enter/exit to a pnp_mode_ops structure: */ @ depends on pnp_match @ identifier enter_match.enter; identifier exit_match.exit; identifier ops; @@ +static const struct pnp_mode_ops pnp_conf_mode_ops = { + .enter_conf_mode = enter, + .exit_conf_mode = exit, +}; + struct device_operations ops = { ..., + .ops_pnp_mode = &pnp_conf_mode_ops, }; /* Match against the new structure as we change the code and the above matches might not work anymore: */ @ mode_match @ identifier enter, exit, ops; @@ struct pnp_mode_ops ops = { .enter_conf_mode = enter, .exit_conf_mode = exit, }; /* Replace enter()/enter() calls with new standard calls (e.g. pnp_enter_conf_mode()): */ @@ identifier mode_match.enter; expression e; @@ -enter(e) +pnp_enter_conf_mode(e) @@ identifier mode_match.exit; expression e; @@ -exit(e) +pnp_exit_conf_mode(e) /* If there are calls to standard PnP functions, (re)move the enter()/exit() calls around them: */ @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ -pnp_enter_conf_mode(e); pnp_op(e); +pnp_enter_conf_mode(e); ... pnp_exit_conf_mode(e); @@ identifier pnp_op =~ "^pnp_((alt_|)enable|(set|enable)_resources)$"; expression e; @@ pnp_enter_conf_mode(e); ... +pnp_exit_conf_mode(e); pnp_op(e); -pnp_exit_conf_mode(e); @@ expression e; @@ -pnp_enter_conf_mode(e); -pnp_exit_conf_mode(e); Change-Id: I5c04b0c6a8f01a30bc25fe195797c02e75b6c276 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3482 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Implement common handling for PnP config modesNico Huber
Many super i/o chips only answer to PnP requests if they are in a configuration state (sometimes also called ext func mode). To cope with that, the code of many chips implements its own version of our default PnP functions like pnp_set_resource(), pnp_enable_resource() etc. To avoid this code duplication, this patch extends our PnP device interface with optional functions to enter and exit configuration mode. Change-Id: I9b7662a0db70ede93276764fa15020f251eb46bd Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3481 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17pnp: Provide alternative pnp_enable() implementationNico Huber
The current default implementation of pnp_enable() only disables devices - if set so in the devicetree - but does not enable them. Enablement takes place in pnp_enable_resources(). Yet, many PnP chips implement their own version of pnp_enable() which also enables devices if set in the devicetree. It's arguable, if enabling those devices makes sense, before they get resources assigned. Maybe we can't write the resource registers if not, who knows? The least we can do is providing a common implementation for this behavior, and get rid of some code duplication. Used the following cocci: @@ expression e; @@ +pnp_alt_enable(e); -pnp_set_logical_device(e); ( -pnp_set_enable(e, !!e->enabled); | -(e->enabled) ? pnp_set_enable(e, 1) : pnp_set_enable(e, 0); | -if (e->enabled) { pnp_set_enable(e, 1); } -else { pnp_set_enable(e, 0); } ) Change-Id: I8d695e8fcd3cf8b847b1aa99326b51a554700bc4 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3480 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17libpayload: ahci: Fix command engine shutdownNico Huber
A timeout while waiting for a device' signature has shown that our error path wasn't correct. The shutdown of the ports command engine always timed out. Fix that by waiting for FR (FIS Receive Running) to be cleared independently from CR (Command List Running) and after clearing FRE (FIS Receive Enable). Change-Id: I50edf426ef0241424456f1489a7fc86a2cfc5753 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3494 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-17Make intel blob locations configurablePatrick Georgi
They were hard-coded to be copied from 3rdparty/ which isn't always the right choice. Since the defaults stay the same, this should be compatible. Change-Id: If2173bef86ad1fcf2335e13472ea8ca41eb41f3d Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3453 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Marc Jones <marc.jones@se-eng.com>
2013-06-17pnp: Unify some alignment to ease autogenerating patchesNico Huber
Most PnP drivers align the initialization of their `device_operations` with spaces. Unify this, so next autogenerated patches always match the alignment. Change-Id: I3f6baef6c8bb294c136354754125ea88c07a61a1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: http://review.coreboot.org/3479 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: i440fx whitespace fixupGerd Hoffmann
Change-Id: I0d499027ffb175638cba0a9830d6ec2041a139db Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3488 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add q35 supportGerd Hoffmann
Add support for the new q35 chipset emulation added in qemu 1.4. Change-Id: Iabfaa1310dc7b54c9d224635addebdfafe1fbfaf Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3430 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: add support for memory above 4GGerd Hoffmann
Change-Id: Ic83f55d01b29b43028e3b363749d64b927db5489 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3492 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17qemu: move ram ressource reservation from "set" to "read" stageGerd Hoffmann
So the pci allocation code knows where memory is and doesn't try map pci devices there. We also don't have to check for overlaps between pci hole and memory then. Change-Id: I5eaea0e4d21210719685860fa1f16ca7b2137cde Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3491 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-17cpu/amd/geode_lx/cache_as_ram.inc: Use $ for constant value instead of ↵Christopher Kilgour
memory reference An uninitialized RAM value was used to select an MSR because a $ was forgotten in front of `CPU_DM_CONFIG0`. It should be the constant value 0x1800, corresponding to CPU_DM_CONFIG0 MSR defined in `src/include/cpu/amd/lxdef.h`. Change-Id: Id53ca98b06cc4a9b55916fd8db23904f98008d45 Signed-off-by: Christopher Kilgour <techie@whiterocker.com> Reviewed-on: http://review.coreboot.org/3478 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>
2013-06-14AMD sb800 agesa/hudson: Use PCI definesKyösti Mälkki
The original lines had contradicting comment and code. This change follows the code and sets MASTER bit too. Change-Id: Id2886bfc107612530f0e9747e5d49a9740fb8532 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3466 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2013-06-14qemu: move i440fx bitsGerd Hoffmann
Prepare tree for adding q35 support: Move emulation/qemu-x86 to emulation/qemu-i440fx. Rename some stuff to include 'i440fx'. Change-Id: Ib8c58175c5734cfcda1b22404ef52c09d38f0462 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-on: http://review.coreboot.org/3429 Tested-by: build bot (Jenkins) Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
2013-06-14usbdebug: Drop temporary disables of log outputKyösti Mälkki
With this patch, output on usbdebug also includes the section of MTRR setups for every CPU. This makes usbdebug output almost identical with that of serial port and CBMEM console. Tested with model_206ax. Also tested previously on model_f2x which does not have these disable/enable calls in model_f2x_init() without detected issues. Change-Id: Idfd0e93439907b17255633658195d698feab3895 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3423 Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-14lynxpoint: Fix PCI IDs for EHCIKyösti Mälkki
IDs were leftovers from bd82x6x. Change-Id: I4ab6062929d346d7f000ce8c0b8c97490bb2b154 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: http://review.coreboot.org/3463 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@google.com> Tested-by: build bot (Jenkins)
2013-06-13AMD Hudson: Add support for the SD controllerDave Frodin
This patch provides the correct SD controller timings for the Family16 device. It also will remove the SD controller from PCI space when device 0:14.7 is set to off in devicetree. This was tested on a AMD Parmer board and a AMD G-series SOC reference board. The settings were found in the AMD Hudson2 RRG and family16 BKGD. Change-Id: I6d7e7997ddc39802ab75dc8a211ed29f028c0471 Signed-off-by: Dave Frodin <dave.frodin@se-eng.com> Reviewed-on: http://review.coreboot.org/3348 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Fill gaps in the xHCI driverNico Huber
Well, it turned out to be more as some gaps ;) but we finally have xHCI running. It's well tested against a QM77 Ivy Bridge board. We have no SuperSpeed support (yet). On Ivy Bridge, SuperSpeed is not advertised and USB 3 devices will just work at HighSpeed. There are still some bit fields in xhci_private.h, so this might need little more work to run on ARM. Change-Id: I7a2cb3f226d24573659142565db38b13acdc218c Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3452 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Port usb hub driver to use the generic codeNico Huber
This is mostly a rewrite, don't even try to read a diff. Tested with an internal rate matching hub on a QM77 board and three hubs integrated into DELL monitors. Change-Id: Ib12fa2aa90af4e0f37143d2ed92c4a1705b6d774 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3451 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add a generic driver for usb hubsNico Huber
The current drivers for external usb hubs and root hubs all follow the same pattern. Before adding another one with 90% of the same code, extract the common parts and rewrite them with a simple interface. This also adds debouncing of new attachments. Current drivers just waited 100ms before they reset the device. However, we should check if the device becomes disconnected and reconnected during this period. Porting of the current hub drivers will take place in separate commits (when I have time to test the older HCIs). Change-Id: I0c0ce0ac1b1cc51fb4cd009b3f9fcd1b9d2ba8fe Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3450 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: usb: Add interval attribute to endpointsNico Huber
Read bInterval from endpoint descriptors and store it in our endpoint_t struct. The interval is encoded dependently on the device' speed and the endpoint's type. Therefore, it will be normalized to the binary logarithm of the number of microframes, i.e. t = 125us * 2^interval The interval attribute will be used in the xHCI driver. Change-Id: I65a8eda6145faf34666800789f0292e640a8141b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3449 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Redirect USB slave init through controller driverPatrick Georgi
xHCI requires special treatment of set_address since it determines the device number itself (instead of the driver, as with the other controllers). The controller also wants to validate a chosen device configuration and we need to setup additional structures for the device and the endpoints. Therefore, we add three functions to the hci_t structure, namely: set_address() finish_device_config() destroy_device() Current implementation for the Set Address request moved into generic_set_address() which is set_address() for the UHCI, OCHI and EHCI drivers. The latter two are only provided as hooks for the xHCI driver. The Set Configuration request is moved after endpoint enumeration. For all other controller drivers nothing changes, as there is no other device communication between the lines where the set_configuration() call moved. Change-Id: I6127627b9367ef573aa1a1525782bc1304ea350d Signed-off-by: Nico Huber <nico.huber@secunet.com> Signed-off-by: Patrick Georgi <patrick.georgi@secunet.com> Reviewed-on: http://review.coreboot.org/3447 Tested-by: build bot (Jenkins) Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: Add enum for USB speedsNico Huber
These values are already used in this usb stack. Change-Id: If96f1dc2b67fbc13dfc4ae2d84e8f9945aa03163 Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3448 Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13libpayload: usb: Skip non-endpoint descriptors during initNico Huber
During device initialization, skip any non-endpoint descriptor before reading the endpoint descriptors. By now, only HID descriptors were skipped. Change-Id: I190f3ae44b864aa71d5f32c3738097cf8f33a61b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: http://review.coreboot.org/3446 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-13util/inteltool: Add support for other 5 chipsetsStefan Tauner
e4e8e090fa36cb3a098e1ddf0ea44c796c140572 does add support for QM57, but there are many more that should work with that code(?). Does not explode on... CPU: Processor Type: 0, Family 6, Model 25, Stepping 2 Northbridge: 8086:0044 (1st generation (Westmere family) Core Processor) Southbridge: 8086:3b0f (QS57) Change-Id: I85e15ba45678a5bd635415a7a8d69c05bff8f7ef Signed-off-by: Stefan Tauner <stefan.tauner@gmx.at> Reviewed-on: http://review.coreboot.org/3321 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Anton Kochkov <anton.kochkov@gmail.com>
2013-06-13AMD S3 resume: use a function to replace duplicated codeSiyuan Wang
In function OemAgesaSaveMtrr of 'src/cpu/amd/agesa/s3_resume.c', there are many code like this: msr_data = rdmsr(0x258); flash->write(flash, nvram_pos, 4, &msr_data.lo); nvram_pos += 4; flash->write(flash, nvram_pos, 4, &msr_data.hi); nvram_pos += 4; Add a function write_mtrr to do this. Change-Id: Id6464e637db1758b07ac2d79d3be1375a8d49651 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3410 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2013-06-13AMD Thatcher: fix issue 'S3 fails to suspend after wake up from USB keyboard'Siyuan Wang
This issue can be reproduced in Linux by the following steps: 1) use pm-suspend to suspend. 2) use USB keyboard to wake up. 3) use pm-suspend to suspend. FAIL To SUSPEND. The cause of this issue is: USB devices use bit 11(0x0b) of GP0_STS represents S3 wake up event, but this bit is not clear after wake up. So OS thinks there is a wake up signal and wake up immediately. In this patch, I add AcpiGpe0Blk using MMIO access and write 1 on bit 11. Write 1 to clear as spec says. I have tested on Thatcher The same change was done for AMD Parmer in commit »AMD Parmer: fix issue 'S3 fails to suspend after wake up from USB keyboard' (03901124) [1]. [1] http://review.coreboot.org/#/c/3347/ (Change-Id: Iec3078bf29de99683e7cd3ef4e178fbeb4dc09c1) Change-Id: Iaef39237497ef896d0f186e8f5522222c0ce6cb7 Signed-off-by: Siyuan Wang <SiYuan.Wang@amd.com> Signed-off-by: Siyuan Wang <wangsiyuanbuaa@gmail.com> Reviewed-on: http://review.coreboot.org/3374 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 06:26:14 +0000