| Age | Commit message (Collapse) | Author |
|---|
|
Change-Id: I40035bf622fea2ff7aed74dce125cbf6265afa6e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37505
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I7772fadc756ceeef5988e4b1ecf8f93ad3605a84
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37502
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
The PCH uses the SRCCLKREQ# pin to detect PCIe device in the slot in
order to send clock signal to it. However, this logic is not required
for the Realtek LAN device, since this chip is soldered to the board
and always uses clocking. The chipset can't receive the clock request
signal (most likely this pin isn't connected) and doesn't enable the
CLK. For this reason, the device is broken during the initialization
phase. The patch disables clock request logic for the PCH PCIe port 6
to initialize the onboard LAN device correctly.
Change-Id: I5cbce6177c89052eb50959f43903b6f8a607e77f
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36377
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 0bc35af93326ec3232ec73c9b1334241b85f0252.
Reason for revert: This change breaks runtime s0ix.
BRANCH=hatch
BUG=b:141831197
TEST=Check slp_s0 residency increased when system is idle.
Change-Id: Ida80f55b56de7129ed629eb29bd14f2ef300126f
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37088
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Add support for clock driver for SC7180
Developer/Reviewer, be aware of this patch from Napali:
https://review.coreboot.org/c/coreboot/+/31083/6
Change-Id: I3f39252c887c36e8af43bc49289795000e4638d8
Signed-off-by: Taniya Das <tdas@codeaurora.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/35496
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
TEST=boot PC Engines apu1 with C bootblock patch and launch
Debian with Linux kernel 4.14.50
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Ie81198f5034a84d319ee7143aa032433f82be254
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37329
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iaba5443d8770473c4abe73ec2a91f8d6a52574af
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37168
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch changes all existing instances of clrsetbits_leXX() to the
new endian-independent clrsetbitsXX(), after double-checking that
they're all in SoC-specific code operating on CPU registers and not
actually trying to make an endian conversion.
This patch was created by running
sed -i -e 's/\([cs][le][rt]bits\)_le\([136][624]\)/\1\2/g'
across the codebase and cleaning up formatting a bit.
Change-Id: I7fc3e736e5fe927da8960fdcd2aae607b62b5ff4
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37433
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
|
|
This patch removes the recently added update8/16/32/64() API and
replaces it with clrsetbits8/16/32/64(). This is more in line with the
existing endian-specific clrsetbits_le16/32/64() functions that have
been used for this task on some platforms already. Rename clrsetbits_8()
to clrsetbits8() to be in line with the new naming.
Keep this stuff in <device/mmio.h> and get rid of <mmio.h> again because
having both is confusing and we seem to have been standardizing on
<device/mmio.h> as the standard arch-independent header that all
platforms should include already.
Also sync libpayload back up with what we have in coreboot. (I'm the
original author of the clrsetbits_le32-definitions so I'm relicensing
them to BSD here.)
Change-Id: Ie4f7b9fdbdf9e8c0174427b4288f79006d56978b
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37432
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Create new variant for Lick that is copied from phaser variant.
Remove unnecessary code, due to not support touchscreen and stylus.
Set to default_override_table.
Remove variant.c.
BUG=b:145181137
BRANCH=octopus
TEST=./util/abuild/abuild -p none -t google/octopus -x -a
Change-Id: If732d94194defb9f5ee9c847ee93dd58aef01174
Signed-off-by: Hash.Hung <hash1.hung@lcfc.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37247
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Henry Sun <henrysun@google.com>
Reviewed-by: Marco Chen <marcochen@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
After adjustment on Drallion
Touch Pad CLK: 393 KHz
Touch Screen CLK: 381 KHz
H1 CLK: 391 KHz
BUG=b:144245601
BRANCH=master
TEST=emerge-drallion coreboot chromeos-bootimage
measure by scope with drallion.
Change-Id: Id669d7199bc6ed4b55d7542f095c6c8baf00f984
Signed-off-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37230
Reviewed-by: Mathew King <mathewk@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All serial I2C bus frequencies should not be over 400KHz in kohaku,
but the measurement showed frequencies of I2C1 and I2C4 were over
400KHz. (b:144885961)
This change adjusts I2C speed settings to limit that frequencies to
400KHz.
The new setting values have been from other projects using same I2C
components, and verified I2C1 and I2C4 frequencies < 400MHz internally.
BUG=b:144885961
BRANCH=firmware-hatch-12672.B
TEST=Verified I2C1 and I2C4 frequency not over 400KHz
Change-Id: I9614fb39b6e55cb2ce1b0879a9f5204e55002f8d
Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37313
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Tune DPTF to ensure compliance with Akemi thermal design
requirements
BUG=b:144195069
TEST=FW_NAME="akemi" emerge-hatch coreboot chromeos-ec
chromeos-bootimage
Signed-off-by: Peichao.Wang <peichao.wang@bitland.corp-partner.google.com>
Change-Id: Ie0e6d93e1fc0c684e067d1450eb119a53cfefaed
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36716
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Make some room for C environment bootblock. The S3 resume
feature needs less than 2 KiB.
Change-Id: Ic49c313d492f1d18f59d61e84f81f106e3b41fb1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37439
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Move the stoneyridge implementation of get/set AP entry to the common
block.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I9c73940ffe5f735dcd844911361355c384f617b1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37416
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
|
|
All AMD CPU families supported in coreboot have BIOSRAM space. Looking at
the source code, every family could have the same API to save and restore
cbmem top or UMA base and size.
Unify BIOSRAM layout and add implementation for cbmem top and UMA storing.
Also replace the existing implementation of cbmem top and UMA with the
BIOSRAM access.
TEST=boot PC Engines apu1 and apu2
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I69a03e4f01d7fb2ffc9f8b5af73d7e4e7ec027da
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37402
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
According to BKDGs for families 15h 60-6fh or newer and families 16h the
ACPI MMIO decode enable bit is the second LSB, not the first LSB.
Additionally create another enable function for older families where
the register and bit is different.
It does not seem to impact any current board, but may be crucial for
incoming C bootblock implementations when this bit will need to be set
very early. Most likely this bit is set by AGESA right now.
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: Iaa31abc3dbdf77d8513fa83c7415b9a1b7fd266f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37178
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Fix regression with commit 5639736
binaryPI: Drop CAR teardown without POSTCAR_STAGE
Occassionally (maybe 1 boot in 10) SMP lapic_cpu_init() fails
with following errors in the logs of pcengines/apu2:
CPU 0x03 would not start!
CPU 0x03 did not initialize!
The CPU number is sometimes 0x02, never seen 0x01. Work-around also
suggests something to do with cache coherency and MTRRs that is really
at fault.
As a work-around return the BSP CAR teardown to use wbinvd instead
of invd. These platforms do not support S3 resume so this is the
easy work-around for the time being.
Change-Id: I3dac8785aaf4af5c7c105ec9dd0b95156b7cca21
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37438
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I70e9d9f769831087becbf42dcfb774d8f2638770
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37363
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: Ie68c6e2ebe56a5902a7665bf62119302146f5928
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37362
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
&imd_cbmem is never NULL, so remove that path
Change-Id: Ib9a9c88d6cd4842df447f046bc0abaa7ef5032c7
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37361
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
(Auto-Generated by create_coreboot_variant.sh version 1.0.0).
BUG=b:145101696
TEST=util/abuild/abuild -p none -t google/hatch -x -a
make sure the build includes GOOGLE_STRYKE
Signed-off-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Change-Id: Iea6f8a1c6c24a1e3545c364551cb623debdc4a1a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37229
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
|
|
Change-Id: I17dc2fed6c6518daf5af286788c98c049088911e
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37366
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
BUG=b:144002424
TEST=Ensured no TPM time out issue and system can boot to OS
Change-Id: I7282e6c2d9627846039638bdc0db3ee7ebba5f12
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37320
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
This patch performs below operations:
1. Rename soc_fill_gpio_pm_configuration to soc_gpio_pm_configuration
2. Move soc_gpio_pm_configuration() to gpio_common.c
3. Calling from bootblock and after FSP-S to ensure GPIO PM configuration
is updated with devicetree.cb value even with platform reset.
BUG=b:144002424
TEST=coreboot configures all MISCCFG.bit 0-5 local clock gating based on devicetree.cb
Change-Id: I54061d556d62462d9012bc47bb9f3604a3e5a250
Signed-off-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37319
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
Remove default path/to/file strings when USE_AMD_BLOBS is not enabled.
This will result in a buildable, but not runable image, in the default
configuration.
Drop the check for HAVE_MERLINFALCON_BINARIES in the path default.
A later patch will address the poor use of this symbol
All PSP blobs are still assumed to be in the same directory as the AMD
public key. Qualify building the amdfw.rom intermediate image and
including it into coreboot.rom on whether the public key remains "".
This change infers it's OK to skip xHCI and GEC firmware too, although
the images normally reside in a separate directory.
This change only determines whether default paths and names exist.
Paths will be updated in a follow-on patch.
Change-Id: Ic21fbd7a58b340a9bcaaea456e1f38b567215b81
Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37220
Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Iab0a442e6dbde0f9abdf2d8689f9891b79a2d37a
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37413
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I4ec9d7d3af1c4d7713ec5dfe516b24d110303ff1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37412
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I9db1147c5e112e5e6832eeece2214fece8aa6b83
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37409
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
This is access to BIOSRAM region in ACPIMMIO. While we use the
region, we do not use these functions.
Change-Id: I39d1ae811cfe23595587ae0fe51c6549ecbaba6c
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37408
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
|
|
Enable ACPI methods to control privacy screen on Drallion devices.
Drallion devices may not have a privacy screen and it is up to the
EC to determine if the privacy screen is present on the system.
BUG=b:142656363
TEST=emerge-drallion coreboot chromeos-bootimage
Change-Id: I79d02bb1b25f0deb49ae4bb852b7ed8c21fd31c7
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36045
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add ACPI methods to the Wilco EC for controlling a privacy screen
on the device.
BUG=b:142237145, b:142656363
TEST=none
Change-Id: Ic3c136f9d2de90eeb3c9e468e4c7430ccf6dcc42
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36044
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add gfx.asl file for cannonlake SOCs to allow for graphics-related ACPI
devices and methods on cannonlake devices.
BUG=b:142237145
TEST=gfx.asl added to drallion dsdt.asl
Change-Id: I38a26f3135d571e2f9b63840d38fd4d3476fc142
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
|
|
This change allows for Intel graphics devices to use drivers/generic/gfx
driver to populate ACPI SSDT table for common graphics related devices
and methods.
BUG=b:142237145
TEST=On sarien_cml add generic/gfx to the devicetree and device is
enumerated and correct SSDT ASL is observed.
Change-Id: Ibc86a88687ac860ebef19a4b68af64fd50d12b8e
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
|
|
Adds a generic graphics driver that can be added to a devicetree which
populates graphics-related ACPI table. It will write the _DOD method
(Enumerate All Devices Attached to the Display Adapter) and a device
object for each device defined. The device may optionally have a
connected privacy screen which can be controlled with a _DSM.
Example:
chip drivers/generic/gfx
register "device_count" = "1"
register "device[0].name" = ""LCD""
register "device[0].addr" = "0x0400"
register "device[0].privacy.enabled" = "1"
register "device[0].privacy.detect_function" = ""\\_SB.PCI0.PVSC.GPVD""
register "device[0].privacy.status_function" = ""\\_SB.PCI0.PVSC.GPVX""
register "device[0].privacy.enable_function" = ""\\_SB.PCI0.PVSC.EPVX""
register "device[0].privacy.disable_function" = ""\\_SB.PCI0.PVSC.DPVX""
device generic 0 on end
end
ASL
Scope (\_SB.PCI0.GFX0)
{
Method (_DOD, 0, NotSerialized) // _DOD: Display Output Devices
{
Return (Package (0x01)
{
0x00000400
})
}
Device (LCD)
{
Name (_ADR, 0x0400) // _ADR: Address
Name (_STA, 0x0F) // _STA: Status
Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method
{
ToBuffer (Arg0, Local0)
If ((Local0 == ToUUID ("c7033113-8720-4ceb-9090-9d52b3e52d73")))
{
ToInteger (Arg2, Local1)
If ((Local1 == Zero))
{
Local2 = \_SB.PCI0.PVSC.GPVD ()
If ((Local2 == One))
{
Return (Buffer (One)
{
0x0F
})
}
}
If ((Local1 == One))
{
ToBuffer (\_SB.PCI0.PVSC.GPVX (), Local2)
Return (Local2)
}
If ((Local1 == 0x02))
{
\_SB.PCI0.PVSC.EPVX ()
}
If ((Local1 == 0x03))
{
\_SB.PCI0.PVSC.DPVX ()
}
Return (Buffer (One)
{
0x00
})
}
Return (Buffer (One)
{
0x00
})
}
}
}
BUG=b:142237145
TEST=Added gfx to devicetree on sarien_cml and correct ASL in SSDT
Change-Id: Ida520dd7aad81ee7c1e5f2d0d3f5cc1a766d78a0
Signed-off-by: Mathew King <mathewk@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36041
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9b2cc1bb58922d9e32202ea4c20b9aacfe308bad
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33673
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
|
|
Change-Id: I19040cca064c2ce063aab77391e0577271c6e9dc
Signed-off-by: Aamir Bohra <aamir.bohra@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37354
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
|
|
Since struct vb2_shared_data already contains workbuf_size and
vboot_workbuf_size is never used in depthcharge, remove it from struct
sysinfo_t. In addition, remove lb_vboot_workbuf() and add
CBMEM_ID_VBOOT_WORKBUF pointer to coreboot table with
add_cbmem_pointers(). Parsing of coreboot table in libpayload is
modified accordingly.
BRANCH=none
BUG=chromium:1021452
TEST=emerge-nami coreboot libpayload depthcharge; Akali booted correctly
Change-Id: I890df3ff93fa44ed6d3f9ad05f9c6e49780a8ecb
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37234
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
Reviewed-by: Julius Werner <jwerner@chromium.org>
|
|
After CB:36808, CB:36844 and CB:36845, all fields except buffer_offset
were removed from struct vboot_working_data. Since buffer_offset is used
to record the offset of the workbuf relative to the whole structure, it
is no longer needed.
This patch removes the structure, and renames vboot_get_working_data()
to vboot_get_workbuf().
BRANCH=none
BUG=chromium:1021452
TEST=emerge-nami coreboot
Change-Id: I304a5e4236f13b1aecd64b88ca5c8fbc1526e592
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37231
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Joel Kitching <kitching@google.com>
|
|
Drop the redundant cimx_util, remove the includes when appropriate and
replace the implementation with amdblocks/acpimmio where needed.
TEST=boot PC Engines apu1 and launch Debian with Linux kernel 4.14.50
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Change-Id: I66b1f82926372b6ebb570893b6eb73c7f2935b9d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37328
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
configuration
The methods generally tested OP region settings and only changed them if
they were not in their desired values. Instead, assign them directly
without checking them.
BUG=chromium:959232
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Change-Id: I3ceca4bd51c4410c7020431f4fd682c4ca925110
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36746
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The mutex is only used in one method and that method is serialised. Remove
the mutex.
BUG=chromium:959232
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Change-Id: Ic173d557f4b49cc9e860d13b782fc4940fd80869
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36745
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
In particular:
- Set voltage before enabling regulators
- Enable regulators and the clock without any sleeping in between. There's
no need to wait there.
- Sleep 1 ms in order to wait for regulator voltages settling before
lifting xshutdown.
BUG=chromium:959232
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Change-Id: I0f8857ae369d5038f293a0e2c48c681df535ad86
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36744
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
In particular:
- Enable regulators *after* configuring the voltage
- Allow 1 ms for the voltages to settle
- Enable clock after powering on regulators
- Remove extra delays between enabling things. The sensor requires 8192
clock cycles after the reset is lifted before I²C access, so 1 ms is
enough.
- Make the delay after lifting xshutdown 10 ms. This guarantees that
streaming will only start once the sensor has had enough time to settle
after lifting the reset.
BUG=chromium:959232
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Change-Id: I4589a7d7ec324f4520572a406cc11ad3feec8b21
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36723
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The PMIC opregion is used to change the direction of two GPIOs for I²C
daisy chain operation. Do this after the PMIC is powered on, not before.
BUG=chromium:959232
Reported-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Change-Id: I923987ef21a971df9e32ca03f2da4dccdac07843
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36722
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The pull direction is used to determine the initial state of the pin. If
no pull direction is specified, the pin will remain as input. Fix this.
BUG=chromium:959232
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Tested-by: Jacopo Mondi <jacopo@jmondi.org>
Change-Id: I1158bc8aaa447b223e8ce25d808348e758de28c5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36721
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The overhead of pushing variables to stack exceeded the number
of instructions the actual MMIO operation took and the build of
google/aleena with inlined accessors turned out to be just
slightly (<2 KiB) smaller for the entire romstage or ramstage.
Simple read-modify-write MMIO cycles should optimise better now.
IO cycles with index/data register are borderline, at
first sight assembly looked better by not inlining them.
Change-Id: If2c37c9886a0151183aa6dd80eb068d6c67b3848
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37211
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I004fc02bd84b7b8d5c5fb96451e59f143f0fe6d3
Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37275
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change MicrocodeRegionLength to MicrocodeRegionSize as per
coffeelake FsptUpd.h.
TEST= Build with CONFIG_USE_CANNONLAKE_FSP_CAR selected and boot test on
coffeelake RVP.
Change-Id: Iebbf5c34e289870a4d7abdd49fd81e4db236051a
Signed-off-by: Praveen Hodagatta Pranesh <praveenx.hodagatta.pranesh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37265
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Modify DPTF parameters.
BUG=b:131272830
BRANCH=firmware-hatch-12672.B
TEST=emerge-hatch coreboot chromeos-bootimage
Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com>
Change-Id: I93930525edf4c5efb6b73bdfc8f16950754f7c9a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37272
Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
since we support JSL and TGL soc under tigerlake folder, we need to make
sure all soc related files get compiled based on
CONFIG_SOC_INTEL_TIGERLAKE_BASE and not only for Tigerlake.
We can control soc specific file compilation through Kconfig of
individual soc.
Change-Id: I1a663555d0bdf7588c4e12363375e7c90629f7d9
Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37376
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Aamir Bohra <aamir.bohra@intel.com>
|
|
Working on some other code, I noticed that superio/aspeed was added as
an include path even though I wasn't using it. I investigated and found
that NOTHING is using it. The files in the aspeed directory all
reference files in their own directory.
The supermicro x11-lga1151-series boards are the only ones using this
SIO.
TEST=util/abuild/abuild -t supermicro/x11-lga1151-series
Signed-off-by: Martin Roth <martin@coreboot.org>
Change-Id: I377066451a50452c17c9bfaa0f815f69e039984e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37390
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
When migrating glados (and variants) to FSP 2.0, the older board-
specific VBTs were dropped in favor of the default FSP 2.0 VBT due to
compatibility issues. Now that libgfxinit is available and the default,
restore the board-specific VBTs so that external displays function
properly. Select MAINBOARD_NO_FSP_GOP for all variants except glados
since FSP/GOP init will not function properly with the older VBTs.
Test: build/boot chell and caroline variants w/libgfxinit, verify
external displays now work again.
Change-Id: If55a67e0d3d78e4acf80cee1733ad8e14b8847d4
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37397
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add libgfxinit support for rammus. Use panel init values from VBT.
Test: build/boot rammus with libgfxinit and Tianocore payload
Change-Id: I4775a36d83bd67a0064a162effaf96649e9c186d
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37312
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Add VBT files for Atlas, Nocturne, Rammus, and Soraka variants.
Extracted from ChromeOS recovery images for the respective boards.
Select INTEL_GMA_HAVE_VBT for all variants except Poppy, since
it doesn't have a VBT (or a recovery image from which to extract one).
Change-Id: Icba2741e0b7309c22c027f956cd20cec78f34052
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37311
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This patch renames COMETLAKE_RVP to COMETLAKE_RVPU to avoid confusion.
TEST=build an image with COMETLAKE_RVPU
Change-Id: I93d7b5cc0be475926bb92503b66797dc67e607f5
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36793
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds some sku support for CML-S CPU and CMP-H chips.
According to doc #605546:
CML-S (6+2) G0: A0650h
CML-S (6+2) G1: A0653h
CML-S (10+2, 8+2) P0: A0651h
CML-S (6+2, 10+2) Q0/P1: A0654h
CMP-H HM470: 068Dh
CMP-H WM490: 068Eh
CMP-H QM480: 068Ch
CMP-H H470: 0684h
CMP-H Z490: 0685h
CMP-H Q470: 0687h
TEST=Boot with CML-S (6+2) G1 + CMP-H WM490 and IDs are recognized
Change-Id: I6bda09070ec330033eff95329448ace57e87144f
Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36684
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subrata.banik@intel.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
These were often used to distinguish CAR_GLOBAL variables that weren't
directly usable. Since we're getting rid of this special case, also get
rid of the marker.
This change was created using coccinelle and the following script:
@match@
type T;
identifier old =~ "^(g_.*|.*_g)$";
@@
old
@script:python global_marker@
old << match.old;
new;
@@
new = old
if old[0:2] == "g_":
new = new[2:]
if new[-2:] == "_g":
new = new[:-2]
coccinelle.new = new
@@
identifier match.old, global_marker.new;
@@
- old
+ new
@@
type T;
identifier match.old, global_marker.new;
@@
- T old;
+ T new;
@@
type T;
identifier match.old, global_marker.new;
@@
- T old
+ T new
= ...;
There were some manual fixups: Some code still uses the global/local
variable naming scheme, so keep g_* there, and some variable names
weren't completely rewritten.
Change-Id: I4936ff9780a0d3ed9b8b539772bc48887f8d5eed
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37358
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
|
|
Use proper int to pointer conversions.
Tested on Lenovo T410 with x86_64 enabled. Still works.
Change-Id: I4ed62297fb47d7d83d4b28e80f3770de99ce70f7
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37393
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
That way, current_console_set() also isn't necessary anymore and
symmetry is re-established.
Change-Id: I392ed509f490d63b0c016a80fd7ab3ef98ba8019
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
|
|
Change-Id: I941c3d80d6b822b12a2d0c279415ab0c6b7f375b
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37379
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: Idd80fae1c39f3c7c4bc66a42e9023fb7a727b024
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37274
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This increases readability.
Also change the update expression. '--variable' does not make much
sense there.
Change-Id: I64db2460115f5fb35ca197b83440f8ee47470761
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37291
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Edward O'Callaghan <quasisec@chromium.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
It always returns the same pointer so why not use the pointer directly?
Change-Id: Ib5a13edc7f3ab05c3baf9956ab67031507bdddc1
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37360
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I638eda3040c7225aa4a8b492c8dc78b0e2effba1
Signed-off-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37369
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ia3b2c10af63cd0cab42dc39f479cb69bc4df9124
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37055
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id66fd0528987fb3e464d400cf9ccac98752fb8f5
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37327
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Kill off NO_GLOBAL_MIGRATION finally!
Change-Id: Ieb7d9f5590b3a7dd1fd5c0ce2e51337332434dbd
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37054
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ic7b088a04165bb24b9ebcebc1580a96ce0fdfcc8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37063
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I81a610a6d119745f2fc637629b8ba7ade76503bc
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I5c970a07c7114bff81f0048cac8eafaec35a2386
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37035
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ice1426cec8f9c5d9644836b0cf025be50e932f48
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37359
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I46e318333e68b999b2889f51fa2fbf140a27a54e
Signed-off-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37357
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
This simplifies transition and reviews towards C environment
bootblock by allowing single cache_as_ram.S file to be used.
Change-Id: I231972982e5ca6d0c08437693edf926b0eaf9ee1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37352
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For BSP CPU, set up stack location to match the symbol from car.ld.
For AP CPUs the stack is located outside _car_region and is currently
not accounted for in the linker scripts.
Change-Id: I0ec84ae4e73ecca5034f799cdc2a5c1056ad8b74
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37351
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I83a8b2325b751feeb046ce74fabd37aeb27c28dc
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37350
Reviewed-by: Patrick Rudolph <siro@das-labor.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ib3bf731b74cb20e886d3ecd483b37b1e3fc64ebf
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37349
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For easier C environment bootblock transition by using
already existing prototypes, BIST will not be passed
to romstage. It is expected that bootblock will have
equivalent code.
Change-Id: I0f8e3657ac79277cd77c397d1b3e931e33a6f5db
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37348
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
BSP and AP have two distinct execution paths for romstage.
Change-Id: Id013b165f1345509fe6b74cef2bf8c3b420f84a4
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37326
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Can be restored with C environment bootblock.
Change-Id: I077d7bf088a0ffc65e9ec0d0b1c239194dc4f4ca
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37347
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie9e7a88f1f8dce967772e7c5ecf4aea971bb1c3f
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37346
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Allows boards to be transformed to C env bootblock one
at a time.
Change-Id: I1cc1910a8bfb6b3495593979cbf7194b0d82c8e1
Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37345
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Changes: https://acpica.org/node/174
Change-Id: I72e44429f96c2ec82092c87aea46c3ff80755d4c
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/34907
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
ACPI Version 6.3 Section 6.1: "A device object must contain either an _HID
object or an _ADR object, but should not contain both."
Change-Id: Ifb777c09aeef09a6a4cbee254b081519f5b6c457
Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36318
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin Roth <martinroth@google.com>
|
|
This moves programming BAR's and setting up console in the bootblock.
Change-Id: I062461cb7bfba2c4df4c20707ecda32f9857b164
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36873
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I151090c8d7f670f121dc7e4cbebfd720034fde33
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37051
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Id409f9abf33c851b6d08903bc111a6b8ec6bf8cf
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37032
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I613c28a2d06f5f0216deb75960ab660941ef8057
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37044
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the common southbridge SPI code reinitialization after lockdown
is not necessary, hence the SMM finalize call becomes a no-op.
Change-Id: I9fae28185470f4d25ef1818627eb76ac38cf100b
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/36006
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This common implementation is compatible.
Change-Id: I540f73514f17d3b135c3222facfe23170d2bb0c8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/33205
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
|
|
Change-Id: I7dcc8d08b40560f105c22454bda1282afaa617da
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37046
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I23d5367150649a64ec6d95601f38940dbb5972f8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37034
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Drop stale comment.
Change-Id: Ie9f5271074ac4876f08fa8470dbc35daf5b694b2
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37053
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Idfbc0cf24000c361c9272fe0f61797de999c9277
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37052
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ideac1a04d6bb1a5e9cc601be7bbfcebe56b4a5da
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37050
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I0a1e9fcea54444a84cc0a6ac30fe7d053261bb1c
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37049
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I9e0d62d45e5b11a0c2f0867633cde2378f305ec8
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37048
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If1150a811a41add88b80fbecda4a66c2bd322825
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37047
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ibe9b353ce050b4718e07bccb958dbe3d2312e741
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37045
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ie1d01f589289239c453c2cc38cc1e25f903399ea
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/37042
Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr>
Reviewed-by: Patrick Georgi <pgeorgi@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
