summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-04-06amd/common/block/pi: Make agesa_heap_base() staticMarshall Dawson
Convert agesa_heap_base() to static since it's unused outside of heapmanager.c. Change-Id: I3ee162985ca1ea36461ea413416d98451a700f8c Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25457 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06vc/amd/stoneyridge: Add definition for AGESA heap rebaseMarshall Dawson
AgesaHeapRebase is an optional callout that allows AGESA to use a coreboot-managed heap base address. Its internal default location is determined by AMD_HEAP_START_ADDRESS which is defined as 4 MB. Add a #define that AGESA may use once the feature is available. BUG=b:74518368 Change-Id: Id23455779b1c8c4931ad1a3122587e09ad237ecc Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06amd/stoneyridge: Use defined value for SPI flash MTRRMarshall Dawson
Replace an absolute value with a #define value in bootblock. This is in preparation for using an additional MTRR in a subsequent patch. Change-Id: I006c7cfa0057b3ed4a21359fc8367caf6ec5baf3 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25455 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com>
2018-04-06purism/librem_skl: Add AC/DC LoadLine to VR ConfigYouness Alaoui
The FSP 2.0 needs to set the ac_loadline and dc_loadline for each VR config. Without it, the Loadline is considered to be 0 mOhm and this causes CPU temp to jump all over the place whenever the CPU is used. This is necessary since there are no VR_CONFIG icc mappings for Skylake SKUs, only KabyLake. These values were copied from the Google Poppy devicetree. Change-Id: I6aeb6ee521988b94f2ae94a60d1a28b87ba984d4 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25324 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06purism/librem_skl: Set TCC Activation at 95CYouness Alaoui
Set the Thermal Control Circuit (TCC) activaction value to 95C even though FSP integration guide says to set it to 100C for SKL-U (offset at 0), because when the TCC activates at 100C, the CPU will have already shut itself down from overheating protection. This was tested on Purism Librem 13 v2. A bisect showed that the immediate shutdowns happened after commit [1] was merged which led to this solution. [1] ec5a947b (soc/intel/skylake: make tcc_offset take effect) Change-Id: Idfc001c8e46ed3b07b24150c961c4b9bc9b71a62 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25323 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-06purism/librem_skl: Enable VMX and Intel SpeedStep in devicetreeYouness Alaoui
Although VmxEnable is currently ignored by FSP, a forthcoming patch explicitly enables it in coreboot, so set it in anticipation of that. Enable Intel SpeedStep to ensure the ACPI tables are generated for the C-states/P-states which are required for the xen-acpi-processor module to be loaded. Without it, the Qubes 4.0-rc4 installer will complain at boot about modules that could not be loaded. Change-Id: I968ef36ec9382a10db13d96fd3a5c0fc904db387 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23684 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-06purism/librem_skl: Enable TPM supportYouness Alaoui
Change the GPIO to match the TPM-enabled motherboards, and add TPM support in devicetree and enable the config. After changing the GPIO table, the librem 13v2 and librem 15v3 now have the same GPIOs, so use a single gpio.h file instead of one file per variant. Change-Id: I425654c1c972118aa81c27961246238c2eef782d Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/23683 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-04-05soc/intel/cannonlake: Add VT-d and VMX programmingLijian Zhao
Add FSP option to enable/disable VT-d (Intel Virtualization Technology for Directed I/O) and VMX (Virtual Machine Extensions), VMX will be disabled once VT-d got disabled. Bug=b:73655383 TEST=Build and flash image on meowth board with debug build FSP, in serial log search for "VMXEnable" and "VtdDiable". Change-Id: I589590450aa4b9302ee2f9bb7b879a332f50b73e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25118 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-05intel/fsp: Update cannonlake fsp headerLijian Zhao
Fsp revison 7.x.2A.20 also updated MemInfoHob.h to fix SMBIOS Type 17 Offset 15h Speed report incorrectly issue. BUG=None TEST=Boot up with meowth platform and run dmidecode to see two dimm entries under Type 17. Change-Id: Ie1c4df162e75535ad458709452a76de01e31907e Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25378 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05soc/intel/cannonlake: Clear EMMC timeout when boot source is not EMMCBora Guvendik
Clear EMMC timeout register to avoid EMMC issue according to cannonlake bios writer guide. _PS0 is not called by kernel when boot source is not EMMC but kernel still initializes emmc. Add _INI to EMMC,SD asl code to cover cases that the system doesn't boot from EMMC. BUG=b:76202699 TEST=Install OS into EMMC Change-Id: I4eef23f637f781b709696951c5bd825530cc1d11 Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-on: https://review.coreboot.org/25290 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05sb/intel/bd82x6x: Let mainboard override SPI opmenuNico Huber
For some SPI chips (e.g. those with AAI writes), the default OPMENU definitions don't work well. Thus, provide an option to override the defaults in the devicetree. Writing the OPMENU now happens in ramstage instead of the SMM finalize handler. If you let coreboot call the finalize handler, nothing should change. If you call the handler from your payload, OTOH, the OPMENU might have been changed in between, so be careful what you lock. Change-Id: I9ceaf5b2d11365e21a2bebc9c5def1fcf0be8aad Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/23587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nicola Corna <nicola@corna.info> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2018-04-05mb/google/poppy/variants/nami: Add SPD file for Vaynechriszhou
Add SPD file for sdp hynix_dimm_H5AN8G6NAFR-UHC (ram id: 6). BUG=b:77290144 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I33503de21c9fc14537c00c092986fd4d2998dace Signed-off-by: chriszhou <chris_zhou@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25461 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Shelley Chen <shchen@google.com>
2018-04-05mb/amd/gardenia/gpio.c: Convert GPIO to new formatRichard Spiegel
New macros were developed that replace previous way of defining GPIO, with pin and intention very clear while keeping the table mostly identical to previous method (there's no pull up or pull down when a GPIO is set as an output). Change current gardenia table to use the new macros. BUG=b:72875858 TEST=Build Gardenia. Change-Id: I402b95374cc5ba01bb961ebcb34d8e465b443c08 Signed-off-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-on: https://review.coreboot.org/25512 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org>
2018-04-05soc/qualcomm/sdm845: Add MMU supportT Michael Turney
Initialize 1st 4GB as Device Memory, except: * 1st page: NULL address * System_IMEM: Cached SRAM * Boot_IMEM: Cached SRAM TEST=build Change-Id: Ic6cf022b08bb2568fdf956cea8bad46da89236c5 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25201 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05soc/qualcomm/sdm845: remove hole in memlayout.ldT Michael Turney
Removed 33KB hole in SSRAM TEST=build & run Change-Id: I6851860f878d9a0688975fa855980870d657ee1a Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25391 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05soc/intel/skylake: Generate ACPI DMAR tableNico Huber
If the SoC is VT-d capable, write an ACPI DMAR table. The entry for the GFXVTBAR is only generated if the IGD is enabled. Change-Id: I8176401dd19aee7ad09a8a145b7a3801fe5b2ae1 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21588 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-04-05soc/intel/skylake: Enable VT-d and X2APICNico Huber
We use the usual static addresses 0xfed90000/0xfed91000 for the GFX IOMMU and the general IOMMU respectively. These addresses have to be configured in MCHBAR registers (maybe, who knows, the blob is undocu- mented), advertised to FSP and reserved from the OS. The new devicetree option `ignore_vtd` allows to retain the old beha- viour (do whatever pre-set UPD values suggest). We also let FSP set up distinct BDFs for messages originating from the I/O-APIC and the HPET. Change-Id: I77f87c385736615c127143760bbd144f97986b37 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/21597 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-04-05src/drivers/pl011: Add verstage supportPatrick Rudolph
Build pl011 to support building vboot on arm platforms. Change-Id: I1ddc372d558b380065ff944fccb0d84eb37d4213 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-04-05mainboard/google/kahlee: Update WP to active lowMartin Roth
The WP signal to the AP isn't inverted as it is on other platforms, so it was reporting incorrectly. Change the ACPI table to be active low, and invert the signal when reporting it to everything else. BUG=b:74946358 TEST=Boot grunt with battery inserted, WP signals both report 1. Remove battery, WP_CUR reports 0, WP_BOOT still reports 1. Change-Id: Ic1369dbda609e34b308af308880449643be6af39 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25469 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-05intelmetool: Include <sys/io.h> for musl-libcIvan J
This allows compiling the program using musl-libc, since otherwise iopl(2) is undeclared. Change-Id: Ia27203cf47b9be3f7bf1ad422c8f490caeae8f56 Signed-off-by: Ivan J. <parazyd@dyne.org> Reviewed-on: https://review.coreboot.org/23834 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-05x86: Add function to modify CR3 registerNaresh G Solanki
Register CR3 holds the physical address of paging-structure hierarchy. Add functions to enable read/write of this register. Change-Id: Icfd8f8e32833d2c80cefc8f930d6eedbfeb5e3ee Signed-off-by: Naresh G Solanki <naresh.solanki@intel.com> Reviewed-on: https://review.coreboot.org/25478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-04mb/google/octopus/variants/baseboard: Set PL1 and PL2 valueSumeet Pawnikar
This patch sets PL1 value to ~6W. Here, 8W setting gives a run-time 6W actual measured power. Also, this patch sets PL2 value to 15W. BUG=None BRANCH=None TEST=Build and read the MSR 0x610. Change-Id: I2439a49b9917db0d9b05f333ce1c35003da493f6 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/25341 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-04-04nb/intel/gm45/raminit: Use CxDRT*_MCHBAR instead of magic numbersJonathan Neuschäfer
This is hopefully more readable. TEST=Build lenovo/x200 with and without this patch (using make BUILD_TIMELESS=1), compare build/coreboot.rom, notice no differences. Change-Id: I079d5353633a3d58ce0e5e616f3fad687a064d65 Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Reviewed-on: https://review.coreboot.org/23709 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-03mainboard/google/zoombini: Enable HAVE_ACPI_RESUMEVaibhav Shankar
This patch selects `HAVE_APCI_RESUME` to enable S3 resume. This has a dependency on EC to store the hash. BUG=b:72472969 TEST=suspend and resume from S3 should work. Change-Id: I9de84dfd450936b3bc08e016bec6cf5ae88eab3d Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/25390 Reviewed-by: Aseda Aboagye <aaboagye@google.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-03include/string: Add strrchrPatrick Rudolph
Copy strrchr from libpayload. To be used by Cavium's BDK or FDT parsers. Change-Id: Iab7981c25113ed16f1b8130de4935d30c29d2fa5 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25447 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: David Hendricks <david.hendricks@gmail.com>
2018-04-03spi: Add helper functions for bit-bangingJulius Werner
Sometimes when bringing up a new board it can take a while until you have all the peripheral drivers ready. For those cases it is nice to be able to bitbang certain protocols so that you can already get further in the boot flow while those drivers are still being worked on. We already have this support for I2C, but it would be nice to have something for SPI as well, since without SPI you're not going to boot very far. This patch adds a couple of helper functions that platforms can use to implement bit-banging SPI with minimal effort. It also adds a proof of concept implementation using the RK3399. Change-Id: Ie3551f51cc9a9f8bf3a47fd5cea6d9c064da8a62 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25394 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-03rockchip: Add gpio_set() functionJulius Werner
The <gpio.h> API is supposed to include a gpio_set() function that just toggles the state of a GPIO already configured as an output, even though we rarely need it since gpio_output() can already be used to initialze a GPIO to a default value while configuring it as an output. This function was forgotten on Rockchip, so this patch adds it now. Change-Id: I201288139a2870e71f55a7af0d79d4a460b30a0c Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25393 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-02mb/google/octopus: Fix Trackpad interrupt GPIO configHannah Williams
BUG=b:73137125 TEST= tested trackpad on Octopus Change-Id: Icc416e7be4e42bda188f74c69db150ba42562128 Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25415 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-02src/soc/stoneyridge: Add a check for CMOS failureMartin Roth
BUG=b:77345148 TEST=Pull power from grunt, verify CMOS power failure is detected. Reboot and verify that CMOS power failure is not detected. Change-Id: Idbf0254e197a6d282e618a98bced52ea5a44917f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/25468 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-02mb/google/octopus: Make PMC I2C pads IOSTANDBY_IGNOREHannah Williams
This fixes wake from S0ix Change-Id: I3b340deafccbf909ec1f4b11ba9a77c6b13a89fd Signed-off-by: Hannah Williams <hannah.williams@intel.com> Reviewed-on: https://review.coreboot.org/25467 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-04-01x86: Increase time out for parking APs to 250msFurquan Shaikh
Change f43adf0 (intel/common/block/cpu: Change post_cpus_init after BS_DEV RESOURCES) moved post_cpus_init to BS_OS_RESUME for S3 path. This results in BSP timing out waiting for APs to be parked. This change increases the time out value for APs to be parked to 250ms. This value was chosen after running suspend-resume stress test and capturing the maximum time taken for APs to be parked for 100 iterations. Typical values observed were ~150ms. Maximum value observed was 152ms. BUG=b:76442753 TEST=Verified for 100 iterations that suspend-resume does not run into any AP park time out. Change-Id: Id3e59db4fe7a5a2fb60357b05565bba89be1e00e Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-04-01chromeec: fix an uninitialized local variableZhuohao Lee
google_chromeec_command() may only write the 1 or 2 bytes to variable r (4 bytes). However, this api returns 4 bytes data. To avaid returning the incorrect data, we need to initialize the local variable. BUG=b:76442548 BRANCH=none TEST=write 2 bytes data into the flash, then, read by cbi_get_uint32 Change-Id: I3395c97ab6bfd7882d7728310de8a29041190e76 Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25460 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Daisuke Nojiri <dnojiri@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-01arch/x86/smbios: Consider corner case of Part NumberLijian Zhao
In case of all DMI Type 17 to be empty, the strip trailing whitespace code will have a zero length Part Number entry, which will cause exception when using (len - 1) where len is zero. Add extra code to cover this corner case. BUG=b:76452395 TEST=Boot up fine with meowth platform, without this patch system will get stuck at "Create SMBIOS type 17". Change-Id: Id870c983584771dc1b60b1c99e95bbe7c0d25c4c Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25377 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-01drivers/spi/flashconsole.c: Fix broken headerArthur Heymans
Change-Id: I61d28791fa75a32591448fc2c40186acfddca86d Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/25413 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-04-01mb/google/octopus: update SSP port and DMIC 4CH nhlt supportM Naveen
Patch corrects SSP configuration to enable audio on GLK boards. Octopus variant board uses max98357a speaker codec and 4CH DMIC, Select the appropriate NHLT blob to be packaged in CBFS. Change-Id: I101ed80f4421925120116b018424ef19d95a2a3a Signed-off-by: Naveen Manohar <naveen.m@intel.com> Reviewed-on: https://review.coreboot.org/25387 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.corp-partner.google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-30soc/intel/skylake: Save/restore GMA OpRegion addressMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to save the ACPI OpRegion table address in ASLB, and restore table address upon S3 resume. Implementation modeled on existing Baytrail code. Test: boot Windows 10 on google/chell with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: Icd6b514e531eec6e49dbb03eb765144f41c1e31b Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25198 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-30soc/intel/braswell: Save/restore GMA OpRegion addressMatt DeVillier
Add global/ACPI nvs variables required for IGD OpRegion. Add functions necessary to save the ACPI OpRegion table address in ASLB, and restore table address upon S3 resume. Implementation modeled on existing Baytrail code. Test: boot Windows 10 on google/edgar with Tianocore payload and GOP display init, observe display driver loaded and functional, display not black screen when resuming from S3 suspend. Change-Id: I7c1fbf818510949420f70e93ed4780e94e598508 Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25197 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2018-03-30soc/intel/common/opregion: Get rid of opregion.cPatrick Rudolph
Get rid of custom opregion implementation and use drivers/intel/gma/opregion implementation instead. Test: boot Windows 10 on google/chell and google/edgar using Tianocore payload with GOP init, observe Intel graphics driver loaded and functional. Change-Id: I5f78e9030df12da5369d142dda5c59e576ebcef7 Signed-off-by: Patrick Rudolph <siro@das-labor.org> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/21703 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-30mb/google/octopus: Enable i2c4 which is the root port for audio codecShamile Khan
BUG=None BRANCH=None TEST=On octopus, "aplay -l" shows the Audio codec. Change-Id: I5d837d62f00d34edf28fd472ae0dbe7c0d94447a Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25376 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-30soc/intel/skylake: Protect me_progress_rom_values array boundaryKane Chen
me_progress_rom_values array provides detailed information maps to ME HFSTS2 register value. There is a chance that ME status value might be over the size of me_progress_rom_values. This commit adds a check before access the array. BUG=b:77247550 Change-Id: I5de569c62b94b0595d3d3ea254f50e312e8c11a4 Signed-off-by: Kane Chen <kane.chen@intel.com> Reviewed-on: https://review.coreboot.org/25425 Reviewed-by: Kevin Chiu <Kevin.Chiu@quantatw.com> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-30mb/google/poppy: Add variant for AtlasDuncan Laurie
Add a new variant of Poppy for the Atlas board. BUG=b:75454415 TEST=tested on a P0 board. System boots and is mostly functional, though some peripherals are not ready so there are no touchpad/touchscreen devices configured yet. Change-Id: I5a0bccd1bda0134aa51885ac2c6e7bb5b45de924 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-29mb/google/octopus: Fix wifi configurationFurquan Shaikh
This change updates devicetree and GPIO configurations to match the schematics: 1. pcie_rp...[2] is the one being used for wifi, thus, clk_req and deemphasis_enable for [2] need to be set instead of [0]. 2. WLAN power enable, wifi disable and PERST# GPIOs need to be configured correctly. BUG=b:76180142 TEST=Verified that wlan0 scan works. Change-Id: Ic51a94902e2cac3491081ade32079e5b88719f45 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25417 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hannah Williams <hannah.williams@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-28soc/intel/skylake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb and the mainboards that had defined it were adjusted accordingly. This was tested on an Eve board with xDCI enabled in devicetree.cb to ensure the xDCI device is enabled in developer mode and disabled in normal mode. Change-Id: Ic3c84beac87452f17490de32082030880834501d Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25365 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28nb/intel/gm45: Allocate a 8M TSEG regionArthur Heymans
Tested on Thinkpad X200. Change-Id: I9db7a71608aaec956a7b22649498b97d58f35265 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23418 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28sb/intel/common: Add common code for SMM setup and smihandlerArthur Heymans
This moves the sandybridge both smm setup and smihandler code to a common place. Tested on Thinkpad X220, still boots, resume to and from S3 is fine so smihandler is still working fine. Change-Id: I28e2e6ad1e95a9e14462a456726a144ccdc63ec9 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/23427 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-03-28mb/intel/glkrvp: Enable ThunderPeak wifi cardRoy Mingi Park
This enables ThunderPeak WiFi card on M.2. TEST=Verify wlan card shows up in lspci Change-Id: I5b3f871bdc67bfc4ed283b997b2a5698451b2bd2 Signed-off-by: Roy Mingi Park <roy.mingi.park@intel.com> Reviewed-on: https://review.coreboot.org/24931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/common/block: add VMX supportMatt DeVillier
Enable VMX if supported by CPU and enabled in board devicetree. Check lock bit unset before enabling VMX. Change-Id: Ic57eac45e9c65baa4479735c6d70a7eb685f080e Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25331 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/cannonlake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. To make the SOC behavior consistent the XdciEnable config option is removed in favor of direct control by devicetree.cb. Change-Id: I34e7d750d3f75757a68977ae8d92bfbee1a10af1 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25366 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/apollolake: Limit xDCI feature when VBOOT is enabledDuncan Laurie
Use the common xDCI function to check if the controller is allowed in the current mode before enabling it. Otherwise, disable the PCI device if it has been enabled in devicetree. Change-Id: I5aea15511c52d1191babf551feb237f4144683e4 Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25364 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/common: Add function to check if xDCI is allowedDuncan Laurie
When CONFIG_VBOOT is enabled then the xDCI controller should only be enabled if the system is in developer mode. This prevents a system in normal/verified mode from being used as a USB peripheral device which could potentially be used to access user data. This change adds a function to return whether xDCI can be enabled or not, which will be used by the SOCs. Change-Id: Ie3ee9dd7077c094a01fd857a2e4033a12ce8979b Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/25347 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-28soc/intel/skylake: enable VMX supportMatt DeVillier
Use soc/common VMX block to enable VMX on supported devices. Change-Id: Iaa1a6201b431783d709c0509715fa8e8b1ce349a Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25332 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Youness Alaoui <snifikino@gmail.com>
2018-03-28mainboard/google/meowth: Disable debug consent and enable S0ixVaibhav Shankar
This patch disables debug consent in the devicetree. When debug consent is set to DBC by default, it prevents some clocks from turning off during S0ix. This blocks S0ix entry. This patch also enables S0ix from the devicetree. BUG=b:76163091 TEST=enter S0ix and check if slp_s0 is asserted Change-Id: I05001a41b13e7784c34fa8f1f773fb94bbdcd01f Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/25312 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-28mb/google/poppy/variants/nami: Add SPD file for sona.Van Chen
Add SPD file for sdp samsung_dimm_K4A8G165WC-BCTD (ram id: 8). BUG=b:76086834 TEST=Verified that the device with this memory part boots to OS fine. Change-Id: I49fa114f07ad2eef10f18de9f6c3380173681bdd Signed-off-by: Van Chen <van_chen@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/25379 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-27soc/intel/skylake: Add NHLT config for max98373 codecDuncan Laurie
Add the NHLT configuration for the max98373 codec to skylake, taken directly from cannonlake. This will allow skylake/kabylake boards to use this codec. Change-Id: Ifb6bf2d31fda25b18d9b1ce2bb721255335d55e4 Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/25367 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: HARSHAPRIYA N <harshapriya.n@intel.com> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
2018-03-27mainboard/google/poppy: Add SPD for Hynix H9CCNNNCLGALAR-NUDDuncan Laurie
Add an SPD for this particular Hynix memory type to the poppy board so it can be used by poppy variants. BUG=b:75454415 Change-Id: I2249c7a4f2c83ec2b3266047a74b9bc22dad43be Signed-off-by: Duncan Laurie <dlaurie@google.com> Reviewed-on: https://review.coreboot.org/25368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-27inteltool: Add some Skylake desktop idsNico Huber
Change-Id: I1738a2544eb2435cb4b8718bcce5170d1ef04f72 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/25144 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2018-03-27soc/intel/skylake: Do a heci_reset before reading ME firmware versionFurquan Shaikh
This change adds a call to heci_reset before attempting to read ME firmware version. This is important to ensure that both ME and BIOS are in sync. BUG=b:76167737 BRANCH=poppy TEST=Verfied that ME firmware version read does not fail on first boot after power failure (i.e. removing battery and AC power). Change-Id: Ib6b39c398d2e1177b087352a4acb8bcf5a9897d6 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-27mb/google/octopus: Remove emmc tuning parameters from devicetreeFurquan Shaikh
Current emmc tuning parameters for octopus were copied over from other boards and result in failure to boot from emmc. This change gets rid of the emmc tuning parameters in devicetree. Once emmc tuning tests are run for octopus, these parameters can be added back. BUG=b:75986903 BRANCH=None TEST=Verified that octopus boots from eMMC without any errors in depthcharge. Change-Id: I7ac44a54afd1ecfe355a9654ac8e92133b67637f Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25375 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-26vboot: Update to most recent GBB flag usageJulius Werner
This patch changes the GBB flag configuration to the latest usage in upstream vboot (as of https://chromium-review.googlesource.com/976660). Change-Id: I585d662d7de34b4964d028e3d06b4df5665fbe9e Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/25346 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-26ec/purism: Fix CPU Turbo value (PPCM) set by the ECYouness Alaoui
The EC needs to set the PPCM value depending on whether Turbo is enabled or not, and the values differ between Broadwell (0, 1) and Skylake (1, 2) platforms. Change-Id: I662dce54415e685c054ffc00b6afde0f1f7765e2 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25329 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-26purism/librem13v1, librem13v2, liberm15v3: Fix EC LPC I/O portYouness Alaoui
The LPC I/O ports for EC communication were not set properly, causing ectool to fail to read the Index I/O from the EC. The EC Index I/O is on port 0x380 and the LPC I/O port needs to be decoded by the PCI device for it to be accessible. Correct the value for the Librem 13v1, 13v2 and 15v3. Change-Id: Ide1d158340eadfabbce5f70ceccddfabb4db188a Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Reviewed-on: https://review.coreboot.org/25328 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Duncan Laurie <dlaurie@chromium.org>
2018-03-26mb/google/poppy/variant/nautilus: Turn off MIPI camera in PMOF methodSeunghwan Kim
This change remove work-around code for the power issue of MIPI and USB cameras on previous board revision. With the work-around code, PMOF ACPI method cannot turn off MIPI camera. So we need to remove it. BUG=b:74214248 BRANCH=poppy TEST=emerge-nautilus coreboot Change-Id: I7becaf61de364f82976ec0be7f8c9e4ef1a7aedd Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Reviewed-on: https://review.coreboot.org/25337 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-26mainboard/hp: Add Elitebook Folio 9470mBill XIE
The code is based on autoport and that for revolve_810g1 Tested: - CPU i5-3437U - Slotted DIMM 8GiB - Onboard USB2 interfaces (wlan slot, wwan slot, camera, smart card) - Mini pci-e on wlan slot - On board SDHCI connected to pci-e - USB3 ports - USB3 hub on dock (connected to USB3 port 1) - NVRAM options for North and South bridges - S3 - TPM1 on LPC - Linux 4.13.17-1 within Debian GNU/Linux testing, loaded from SeaBIOS, or Linux payload (Heads) Not tested: - Fingerprint reader on USB2 Not working well: - EHCI debug on port SSP2,(The USB port on the left, wired to ehci before OS) it has always-on enabled by default (maybe via EC), which disturbs FT232H's own power up, requiring a very critical timing to plug it in for it to work. Change-Id: I52e549ec18e8aa661a506a16dbc7f83417c0da78 Signed-off-by: Bill XIE <persmule@gmail.com> Reviewed-on: https://review.coreboot.org/25218 Reviewed-by: Patrick Rudolph <siro@das-labor.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26mainboard/google/cheza: Add support for ChezaT Michael Turney
TEST=build Change-Id: I32d185741ce20a3a82e6895de3026ade52d0bcc8 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-03-26soc/qualcomm/sdm845: Support for new SoCT Michael Turney
TEST=build Change-Id: Ie54e310a94f61b8d86c13261937015e3f5a2ab01 Signed-off-by: T Michael Turney <mturney@codeaurora.org> Reviewed-on: https://review.coreboot.org/25199 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-03-26drivers/intel/fsp: Fix TPM initialization when vboot is disabledYouness Alaoui
A change introduced by commit fe4983e5 [1] in order to prevent re-initialization of the TPM if already set up in verstage had the wrong logic in the if statement, causing the TPM to never be initialized if vboot is disabled. The RESUME_PATH_SAME_AS_BOOT config is enabled by default for ARCH_X86, resulting in the if statement to always evaluate to false. Remove that condition from the if statement to allow it to function as intended. This patch also enables TPM initialization for FSP 2.0 with the same conditions. [1] intel/fsp1_1: Do not re-init TPM in romstage if already setup in verstage https://review.coreboot.org/#/c/coreboot/+/14106/ Change-Id: Ic43d1aa31a296386c7eab6d997f9b701e9ea0fe5 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/23680 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26soc/intel: Add KBL-S MCH and some KBL PCH supportGaggery Tsai
This patch adds the support for KBL-S MCH and Z270, H270, B250 and Q250 PCH chips. BUG=None BRANCH=None TEST=Boot with KBL-S CPU and B250/H270 PCHs. Change-Id: If03abb215f225d648505e05274e2f08ff02cebdc Signed-off-by: Gaggery Tsai <gaggery.tsai@intel.com> Reviewed-on: https://review.coreboot.org/25305 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-03-26soc/skylake/cpu: Fix Intel SpeedStep enable/disableMatt DeVillier
In an attempt at consolidation, commit 0a203d1 [1] introduced an additional read/write of the MISC_ENABLE msr, as well a bug which nullified the setting of Intel SpeedStep by inserting said read/write calls in between another set of read/write calls to the same msr. Fix by reverting to previous (simpler) implementation. [1] soc/intel/skylake: Use CPU common library code https://review.coreboot.org/19566 Test: boot Linux on Librem13v2, read MISC_ENABLE msr and verify SpeedStep bit correctly set based on devicetree setting. Change-Id: Id2ac660bf8ea56d45e8c3f631a586b74106a6cc9 Signed-off-by: Youness Alaoui <youness.alaoui@puri.sm> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-on: https://review.coreboot.org/25330 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-26mb/octopus: Set PNP config to PNP_PERF_POWERShaunak Saha
This patch sets the PNP config value to PNP_PERF_POWER. The config values for soc can be found in chip.h TEST = Build for octopus. Change-Id: I2239aa70cb708e6e1c06339ca9d517e7eaa198ed Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25310 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-26lib/lzma: Respect dstn argumentPatrick Rudolph
Don't write more bytes than the caller requests. Based on I484b5c1e3809781033d146609a35a9e5e666c8ed. Change-Id: I336de417c7cd6f35cf84947fc4ae161c15bd93ef Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/25222 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2018-03-25mb/glkrvp: Set PNP config to PNP_PERF_POWERShaunak Saha
This patch sets the PNP config value to PNP_PERF_POWER. The config values for soc can be found in chip.h TEST = Built and booted glkrvp, verified warm and cold reboot and suspend resume. Change-Id: Ia390c0fafe2de64bd9e4ca44e5ed5d904663ae3c Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Reviewed-on: https://review.coreboot.org/25309 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-24mb/google/octopus: Select TPM options only if mocktpm is not selectedFurquan Shaikh
This change adds a new Kconfig option for mainboard octopus "HAS_TPM" that auto-selects all TPM related options only if VBOOT_MOCK_SECDATA is not selected. BUG=b:76203913 TEST=Compiles fine with mocktpm. Change-Id: Ib28fc47a70be58cd9a9ec65ce3b1cda68d558437 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25340 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Jett Rink <jettrink@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23soc/amd: Print dimm_info and TYPE17_DMI_INFO to help debug incorrect valuesRaul E Rangel
Example output: AGESA TYPE 17 DMI INFO: Handle: 1 TotalWidth: 64 DataWidth: 64 MemorySize: 8192 DeviceSet: 0 Speed: 1200 ManufacturerIdCode: 44416 Attributes: 1 ExtSize: 0 ConfigSpeed: 933 MemoryType: 0x1a FormFactor: 0xd DeviceLocator: DIMM 0 BankLocator: CHANNEL A SerialNumber(8): 00000000 PartNumber(20): HMAA51S6AMR6N-UH CBMEM_ID_MEMINFO: dimm_size: 0 ddr_type: 0x1a ddr_frequency: 1200 rank_per_dimm: 1 channel_num: 0 dimm_num: 0 bank_locator: 0 mod_id: 44416 mod_type: 0x1a bus_width: 64 serial(4): 0000 module_part_number(23): HMAA51S6AMR6N-UH ��@ dimm_size, mod_type, bus_width need to be updated so they return the correct values. module_part_number is missing a null terminator due to the AGESA part number being larger than the dimm_info buffer. Example dmidecode output: Memory Device Array Handle: 0x0000 Error Information Handle: Not Provided Total Width: 8 bits Data Width: 8 bits Size: No Module Installed Form Factor: Unknown Set: None Locator: Channel-0-DIMM-0 Bank Locator: BANK 0 Type: DDR4 Type Detail: Synchronous Speed: 1200 MT/s Manufacturer: Hynix/Hyundai Serial Number: 0000 Asset Tag: Not Specified Part Number: HMAA51S6AMR6N-UH Rank: 1 Configured Clock Speed: 1200 MT/s Minimum Voltage: Unknown Maximum Voltage: Unknown Configured Voltage: Unknown To enable the output set CONFIG_DEBUG_RAM_SETUP. The Kconfig change is required in order to enable CONFIG_DEBUG_RAM_SETUP, otherwise it's not a valid option. BUG=b:65403853 TEST=Test output shown above Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I5eac00b9400056357915761287770a400b3f9f8b Reviewed-on: https://review.coreboot.org/25303 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Richard Spiegel <richard.spiegel@silverbackltd.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-23arch/x86/smbios: Strip trailing whitespace on DMI 17 part number.Raul E Rangel
dmidecode used to print 'HMAA51S6AMR6N-UH ' it now prints 'HMAA51S6AMR6N-UH' BUG=b:65403853 TEST=Verified using dmidecode Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ia10ef434a2377e34ae7a8f733c6465c2f8ee8dfa Reviewed-on: https://review.coreboot.org/25302 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-23include: Update dimm_info documentationRaul E Rangel
Reference the JEDEC SPD spec and clarify some comments. BRANCH=dimm-info BUG=b:65403853 TEST=Documentation change only Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1f2a3a70919c34f17472904323ec5accdfc876be Reviewed-on: https://review.coreboot.org/25301 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-23mainboard/intel/cannonlake_rvp: Enable S0ixVaibhav Shankar
This patch enables S0ix from the devicetree. Change-Id: I38662dc7203366bdee5f1c7aaa18979867a79ba1 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/25293 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23soc/intel/cannonlake: Enable low power S0 Idle capabilityVaibhav Shankar
This patch sets the ACPI FADT flag ACPI_FADT_LOW_POWER_S0 if S0ix is enabled for the platform. This also sets the FSPUPD to indicate the status of S0ix on the platform. TEST= Boot to OS and check the ACPI_FADT_LOW_PWR_IDLE_S0 flag is set in FACP table - FADT.Flags[21] bit. Change-Id: I6214ebb61f25ef8b704e60c8474808493c92e6f6 Signed-off-by: Vaibhav Shankar <vaibhav.shankar@intel.com> Reviewed-on: https://review.coreboot.org/25292 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23mb/google/zoombini: always report EC is in RO modeNick Vaccaro
Always report that EC is in RO mode. This is a temporary workaround for a hardware issue that is causing EC to appear to be in RW mode when it is not. This change will be reverted once transition is made to newer hardware. BUG=b:74215817 BRANCH=master TEST=Verify meowth can boot to recovery's insert screen. Change-Id: Ib3705bba0bb1f351da79e599566fbffab94428f3 Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25298 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-23mb/intel/kblrvp8: Add KBLRVP8 supportV Sowmya
Add the config for setting SPD DIMM size to 512 bytes for KBLRVP8 with DDR4 memory. Configure the DIMM1 memory SPD data for channel0 and channel1. Set the UserBd UPD to BOARD_TYPE_DESKTOP for kblrvp8. Signed-off-by: V Sowmya <v.sowmya@intel.com> Change-Id: I985968d331991884050c3920ec9798cd4cb371c7 Reviewed-on: https://review.coreboot.org/25194 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com>
2018-03-23arch/arm64/armv8/mmu: Add support for 48bit VAPatrick Rudolph
The VA space needs to be extended to support 48bit, as on Cavium SoCs the MMIO starts at 1 << 47. The following changes were done to coreboot and libpayload: * Use page table lvl 0 * Increase VA bits to 48 * Enable 256TB in MMU controller * Add additional asserts Tested on Cavium SoC and two ARM64 Chromebooks. Change-Id: I89e6a4809b6b725c3945bad7fce82b0dfee7c262 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/24970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2018-03-23soc/intel/apollolake: Bypass FSP's deassertion of PERST# signal.Shamile Khan
BUG=b:76058338 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: I1858c7843d16b6b63fc30762a889916bbb9b781a Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25311 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-23vendorcode/intel: Update FSP Header files per v2.0.0Srinidhi N Kaushik
Update FSP header files to match GLK FSP Reference Code Release v2.0.0 Change-Id: I93d95e1977a4e31981e8b91882059611d91f78a5 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/25247 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-22payloads/seabios: Update stable from 1.11.0 to 1.11.1Paul Menzel
SeaBIOS 1.11.1 was released with the changes below. ``` $ git log --oneline rel-1.11.0..rel-1.11.1 0551a4b paravirt: Only enable sercon in NOGRAPHIC mode if no other console specified a7aa43e pci: fix 'io hints' capability for RedHat PCI bridges 0e739f2 shadow: Don't invoke a shutdown on reboot unless in a reboot loop 5d9a515 build: Use git describe --always ``` Change-Id: Ia77e98edcd42b28677de9670ce13c2ea5d327315 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/25284 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Idwer Vollering <vidwer@gmail.com> Reviewed-by: Philipp Deppenwiese <zaolin.daisuki@gmail.com>
2018-03-22mb/google/zoombini: Enable NVMeNick Vaccaro
BUG=b:72120814 BRANCH=master TEST=none Change-Id: I64ab38dda78345c1f3d7d3f2bf3cb04c19290ceb Signed-off-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-on: https://review.coreboot.org/25256 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-22mb/google/octopus: Add CLKREQ and de-emphasis settings for PCIe Wi-FIShamile Khan
BUG=b:73292699 BRANCH=None TEST=Build coreboot for Octopus board. Change-Id: Ic73ad38ad9a12bec614e530f7f35619246b9f57f Signed-off-by: Shamile Khan <shamile.khan@intel.com> Reviewed-on: https://review.coreboot.org/25288 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-22amd/stoneyridge: Add PM1 wake status to boot logMarshall Dawson
Print the wake status bits to the console. The format is kept similar to Intel's to maintain compatilibity with inspection utilities. Add relevant wake events from the register to the ELOG. Clear the register before continuing. TEST=Inspect console and ELOG for Grunt BUG=b:75020968 Change-Id: Idc9d12326abb290e4f7a5c60677eb6e057d475b2 Signed-off-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-on: https://review.coreboot.org/25300 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Marc Jones <marc@marcjonesconsulting.com>
2018-03-22intel/fsp: Update Cannonlake FSP headerLijian Zhao
Update Cannonlake FSP header to version 7.x.2A.20, the following changes were made: 1. Add MemtestonWarmBoot option. 2. Add enable8254clockgatingonS3 option. 3. Default disable Tccoffsetlock BUG=None TEST=None Change-Id: Ie794960f0253b2a6dbd55ffda973756d15e35c01 Signed-off-by: Lijian Zhao <lijian.zhao@intel.com> Reviewed-on: https://review.coreboot.org/25289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2018-03-22soc/intel/skylake: Define IFD_CHIPSETFurquan Shaikh
This change defines IFD_CHIPSET as sklkbl to allow ifdtool to set the right access control bits for SKL/KBL platforms. BUG=b:76098647 BRANCH=poppy TEST=Verified that the access control bits on KBL platforms are set correctly. Change-Id: I7b2131caa06d6a975e703262931ec0ea519a86aa Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25307 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-22util/ifdtool: Fix region access control for SKL/KBLFurquan Shaikh
The default values used by ifdtool for setting region access control do not match the expected values for SKL/KBL as per the SPI programming guide. This change adds platform "sklkbl" that sets region access control bits differently for SKL/KBL images. BUG=b:76098647 BRANCH=poppy TEST=Verified that the access control bits on KBL images is set correctly. Change-Id: I1328d8006c25be282b3223268d8f1fd0a64e2ed3 Signed-off-by: Furquan Shaikh <furquan@google.com> Reviewed-on: https://review.coreboot.org/25306 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-21MAINTAINERS: change second PC Engines maintainerPiotr Król
Change-Id: I5eac0ae55e759ac9eb26783c11057db15fa62574 Signed-off-by: Piotr Król <piotr.krol@3mdeb.com> Reviewed-on: https://review.coreboot.org/25254 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2018-03-21mb/google/fizz: Enable I2C bus 2Zhongze Hu
I2C bus 2 goes to the custom add-in card slot and it was disalbed cuase it was idle. Google CFM add-in card is going to use this I2C bus so it needs to be re-enabled. BUG=b:73006317 TEST=Tested with add-in card on fizz hardware and verified I2C bus 2 is working properly. Change-Id: I2c9b5a9323fd51872e340c35005c4a3432716808 Signed-off-by: Zhongze Hu <frankhu@chromium.org> Reviewed-on: https://review.coreboot.org/25258 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Shelley Chen <shchen@google.com>
2018-03-21mb/intel/glkrvp: Re-size flash WP_RO segmentSrinidhi N Kaushik
Update the size in WP_RO segment of the flash to accommodate builds using debug FSP. Change-Id: I8b24422e1eef2d0a81006286d4fc58f238fdce11 Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/25255 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-21mb/google/octopus: Re-size flash WP_RO segmentSrinidhi N Kaushik
Update the size in WP_RO segment of the flash to accommodate builds using debug FSP. Change-Id: I0a0d1d0121b503ff390adf3ce25973d72e59fdeb Signed-off-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com> Reviewed-on: https://review.coreboot.org/25253 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-21mb/google/octopus: Create bip variantJustin TerAvest
This creates a bip variant for octopus. Nothing is set in the variant files here-- everything is picked up from baseboard. BUG=b:75976864 TEST=None Change-Id: I7a8ac3d8bb71416f05ef1a605684d92d5902abda Signed-off-by: Justin TerAvest <teravest@chromium.org> Reviewed-on: https://review.coreboot.org/25285 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-21mainboard/google/kahlee: Update GPIOs based on board IDMartin Roth
BUG=b:73078053 TEST=build & boot Grunt Change-Id: I2d4ba197b19c4948b867a61575e858b2a826a286 Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/25287 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2018-03-21mb/google/poppy/variants/nami: change type of board_sku_id() to uint32_tZhuohao Lee
Tools/scripts, like mosys/arc-setup, use int (4 bytes) to read the sku id. In order to support "-1", we need to use uint32_t (4 bytes) instead of using uint16_t (2 bytes) data type. Otherwise, tools/scripts will read 65535 instead of -1. Another reason to change this is that sku_id can be supported by ec up to 4 bytes. BUG=b:73792190 TEST=mosys output "Platform not supported" for -1 sku id arc-setup read -1 sku id Change-Id: Ib3baa8419f138abeb412ac09c2e7dc608e3b758b Signed-off-by: Zhuohao Lee <zhuohao@chromium.org> Reviewed-on: https://review.coreboot.org/25252 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-21mb/google/octopus: Enable TPM on GSPIRavi Sarawadi
BUG=b:73133848 BRANCH=None TEST=Build coreboot for Octopus board. Tested the GSPI interface with a SPI EEPROM and got correct response to a RDID command Change-Id: Ia10ab9da0055b54a96134a6e4c51b2a229a6fecf Signed-off-by: Ravi Sarawadi <ravishankar.sarawadi@intel.com> Reviewed-on: https://review.coreboot.org/24907 Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2018-03-21drivers/i2c/designware: Fix indentationMaulik V Vaghela
Remove extra tab before printk statement. Change-Id: Id82239f74ac030f25000a08764637f6d1b52b87b Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/25295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh Solanki <naresh.solanki@intel.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2018-03-21mb/google/poppy/variant/nautilus: Enable CABC feature as defaultSeunghwan Kim
This change configures GPP_E22 to GPO_HIGH to enable CABC feature on nautilus board. BUG=b:68789889 BRANCH=poppy TEST=emerge-nautilus coreboot Signed-off-by: Seunghwan Kim <sh_.kim@samsung.com> Change-Id: Ifed0d37bf8147aa1b580f594f36f186051c2eb52 Reviewed-on: https://review.coreboot.org/25120 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Furquan Shaikh <furquan@google.com>
2018-03-21mb/google/kahlee: Add register address mapping for FCH MISCAkshu Agrawal
Audio machine driver will enable/disable clock by making it as a CCF clock in kernel. BUG=b:74570989 TEST=cherry-picked https://patchwork.kernel.org/patch/10291875/ on 4.14 kernel aplay -vv <file> check register to see clock enabled kill aplay check register to see clock disabled Change-Id: Ia553e55ffb358415067000d2d2d2744322d1c4db Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-on: https://review.coreboot.org/25263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org>