| Age | Commit message (Collapse) | Author |
|---|
|
Currently most of the FSP debug messages (when enabled) are truncated due to insufficient size of cbmem buffer.
Increase premem cbmem console size to 0x16000 bytes and cbmem buffer size to 0x100000 bytes so that cbmem buffer can contain most of the debug logs when FSP debug messages are enabled.
TEST=Verify output of 'cbmem -c' when FSP debug messages are enabled but MRC debug message.
Change-Id: I0273fb14916f213b686270a9dec4c1b47612af4d
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71289
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current size of the cbmem buffer (128KB) is insufficient to contain the
complete debug log causing the cbmem console buffer to wrap.
This patch increases cbmem buffer size to 256KB so that the complete
debug log can be stored in it.
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Change-Id: I2099386dd87a010c3a5937bd896620270f587b1c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71288
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Intel SPR-SP (Sapphire Rapids Scalable Processor) was product launched
on Jan. 10, 2023. The chipset includes Emmitsburg PCH.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I05ed8f753bf63b6cb3035e973eb6a7974edfd673
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71944
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
EBG (Emmitsburg) PCH is used in Intel SPR-SP chipset.
Its datasheet is Intel doc# 606161.
Add Intel Emmitsburg PCH GPIO pin definitions.
Also common code change is made to support Intel Emmitsburg PCH:
a. Instead of 2 PAD registers per GPIO, it has 4 PAD registers.
b. The register address space may not be contiguous from one GPIO
group to the next GPIO group.
Change-Id: Ia0d9179544020b6abb0be1ecd275a9a46356db8a
Signed-off-by: Jonathan Zhang <jonzhang@meta.com>
Signed-off-by: Christian Walter <christian.walter@9elements.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71943
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
This patch implements a new API to make the UFS controller function
disabled. Additionally, perform a warm reset post disabling the UFS
controller to let PMC know about the state of the UFS controller
and disable the MPHY clock.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
From the AP log, I am able to confirm that UFS is function disabled
using PSF.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I940a634f70f8c97ef1234866d4c5a1ff224c6e24
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71989
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch makes it easy for OEMs to keep a unified AP firmware image
to boot different SKUs with UFS and non-UFS as boot media.
With a unified image while booting on non-UFS SKU is exhibiting S0ix
failure due to UFS remain enabled in the strap although FSP-S is
making the UFS controller function disabled.
The potential root cause of this behaviour is although the UFS
controller is function disabled but MPHY clock is still in active
state.
A possible solution to this problem is to issue a warm reboot (if
boot path is S5->S0 or G3->S0) after disabling the UFS and let PMC
read the function disable state of the UFS for disabling the MPHY
clock.
Mainboard users with such board design where OEM would like to use
an unified AP firmware to support both UFS and non-UFS sku booting
might need to choose this config to allow disabling UFS while booting
on the non-UFS SKU.
Note: selection of this config would introduce an additional warm
reset in cold-reset scenarios due to function disabling of the UFS
controller.
BUG=b:264838335
TEST=Able to build and boot Google/Marasov successfully.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0a811d8f4aad41dab6f8988329eaa1d590a4637a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71988
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This patch calls into `pmc_clear_pmcon_pwr_failure_sts()` to clear
GEN_PMCON_x register status bits after determining the
`prev_sleep_state`.
Having those bits being set across reboot might be misleading.
For example: although the last boot was not due to power failure but
the power failure bit still remains the same (unless cleared).
Note: clearing `GBL_RST_STS` bit earlier than FSP-M/MRC having an
adverse effect on the PMC sleep type register which results in
calculating wrong `prev_sleep_state` post a global reset, hence,
just clearing the power failure status bits rather than clearing
the complete PMC PMCON_A register.
BUG=b:265939425
TEST=Able to clear the GEN_PMCON_A register power failure bits aka
BIT16 and BIT14 on google/marasov platform over next boot to avoid
having its persistent effect.
Without this patch:
pm1_sts: 0100 pm1_en: 0000 pm1_cnt: 00001c00
...
GEN_PMCON: d0215238 00002200
With this patch:
pm1_sts: 0100 pm1_en: 0000 pm1_cnt: 00001c00
...
GEN_PMCON: d1001038 00002200
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I4f5dfe0251aeb85b667fbfc44fbf17b025aec090
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72054
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
Update header files for FSP for Meteor Lake platform to
version 2473_86, previous version being 2431_80.
FSPM:
1. Removed deprecated UPD PcieMultipleSegmentEnabled
2. Address offset changes
FSPS:
1. Removed deprecated UPD ForcMebxSyncUp
2. Address offset changes
BUG=b:261150757
Signed-off-by: Kulkarni, Srinivas <srinivas.kulkarni@intel.corp-partner.google.com>
Change-Id: Ie396ad7ef4da2d1c52d37477bbb0815d2d650841
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70546
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Maulik Vaghela <maulikvaghela@google.com>
|
|
This patch overrides `SaGv` FSP-M UPD to enable SaGv feature to be
able to train memory (DIMM) at different frequencies.
On all latest Intel based platforms SaGv is expected to be enabled
to support dynamic switching of memory operating frequency.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I7cf52b966c1355c1f2bd4ae7c256fa4252a90666
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72136
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch converts below chip configs from camel case to snake
case to match with the other chip configs belongs to the chip
structure.
- SaGv
- RMT
Additionally, updated the `sagv` help text and operation as
applicable based on the FSPMUPD.h file (belongs to the vendorcode).
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I62e521cf3f46e888e2c995d83ac7dc666de1af82
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72135
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
This patch implements an API named `pmc_clear_pmcon_pwr_failure_sts()`
to clear power failure status bits of PMC General PM Configuration A/B
based on the underlying SoC.
Based on the available PMC register definitions between Sky Lake till
latest Meteor Lake platform, the SoC platform that selects
SOC_INTEL_MEM_MAPPED_PM_CONFIGURATION config has power failure bits
mapped into the MMIO mapped GEN_PMCON_A register where else for the
other SoCs, those power failure bits are belongs to the PCI config
space mapped GEN_PMCON_B register.
BUG=b:265939425
TEST=Able to build the google/marasov.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Icbbe47ccfd489edf9c38f52bdf7cf2de7aa9eedf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72053
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
|
|
Some boards may want to perform a specific operation before the CSE FW
update final operation begins. For instance, on Brya this new callback
can be used to inform the end-user that an update is in progress.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=Compilation success
Change-Id: Ia4d32a71f3ae61d2e24197fee6b458512f7778a9
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72097
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Reviewed-by: Anil Kumar K <anil.kumar.k@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
If a CSE update is going to happen and early graphics is supported by
the mainboard, an on-screen text message is displayed to inform the
end user.
CSE update can take a while and an impatient end user facing a black
screen for a while may reset the device unnecessarily.
BUG=b:264648959
BRANCH=firmware-brya-14505.B
TEST=On screen text message during CSE update observed on skolas
Change-Id: I28c4fef9345d577be287b76a2a767b5c852ec742
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72098
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Commit 78ee4889dc32 ("soc/amd/cezanne/acpi: Add support for RTC
workaround") added a workaround for the Cezanne silicon. This was copied
to the Mendocino code, but from both the discussion in b:209705576 and
the referenced amd_pmc_verify_czn_rtc function in drivers/platform/x86/
amd/pmc.c that is only called if pdev->cpu_id == AMD_CPU_ID_CZN is true
Mendocino doesn't need that workaround, so remove it.
TEST=Running suspend_stress_test -c 5 on Chausie shows no errors
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7d0b35ef8cf88ff0b9bed8820b8da32c2058cc1b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72091
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Raul Rangel <rrangel@chromium.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 80b1fa33.
Reason for revert:
"Error: CONFIG() used on unknown value (ENABLE_FSP_ERROR_INFO) at src/soc/intel/xeon_sp/romstage.c:20"
Change-Id: I843322fc9d7ebbc30e9209ae933313f2668bfa40
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71287
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
|
|
This patch fixes the build failure with 'make -j' where the build
fails at "$(MAKE)... savedefconfig" as that rule doesn't have the
dependency on kconfig/conf.
Normally make takes care of all dependencies, so parallel builds
work well. However if you have recursive make calls, i.e. make
calling make like in these recipes, there is no single make with a
global view of the dependencies anymore, and then multiple "makes"
can try to build the same file concurrently. Adding that explicit
dependency on build/util/kconfig/conf makes sure the recursive make
is only called later when the top-level make already finished
building build/util/kconfig/conf.
Signed-off-by: Lean Sheng Tan <sheng.tan@9elements.com>
Change-Id: Id44ab44618b0ddfb3c2472c469499429118bf76d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72070
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Patrick Georgi <patrick@coreboot.org>
|
|
Provide D-states to enter LPM (S0ix) for MTL
Values were copied over from corresponding ADL file (as MTL data
sheet is not yet available).
TEST=Built and tested on Rex by verifying SSDT contents
Change-Id: If367511a29726669fe25ad2124e2f9b877a31ee8
Signed-off-by: Eran Mitrani <mitrani@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71644
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
|
|
Replace the intelblocks/gpio.h, soc/gpio.h and soc/gpio_defs.h includes
with the common gpio.h which includes soc/gpio.h which includes
intelblocks/gpio.h which includes soc/gpio_defs.h. This patch also fixes
alphabetic ordering of included headers.
BUG=b:261778357
TEST=Able to build and boot.
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Change-Id: I3138edd8125601b6c9dff5f9252a4bba8385146d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72034
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Change-Id: Idea51d23d30735062f38f10162c77131fbb07776
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72375
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
RAID_MISC_ROM_FILE isn't used and there isn't "misc.bin" file.
Change-Id: I4007537ee2d177010f04f733e8a9b7167b0fce73
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72374
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
RAID_ROM_FILE isn't used and there isn't "raid.bin" file.
Change-Id: I056c122289f05d662b1b1e5a8cdc0c73915f7249
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72373
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I62d3fb4d63262925818712120664ddc8ec80c922
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72372
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
For SPR-SP FSP MRC cache, NO_FSP_TEMP_RAM_EXIT should not
be selected.
Change-Id: I63101f286809d6cebb9a7d74443446cb3fe650c4
Signed-off-by: Johnny Lin <johnny_lin@wiwynn.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71928
Reviewed-by: Simon Chou <simonchou@supermicro.com.tw>
Reviewed-by: Jonathan Zhang <jonzhang@fb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
After calling FSP MemoryInit API, if there is an error, some FSPs
(such as SPR-SP FSP) is capable of generating FSP_ERROR_INFO_HOB.
Check existence of such a HOB and handle it accordingly.
Signed-off-by: Tim Chu <Tim.Chu@quantatw.com>
Change-Id: I612393ffac90815606f3f2544bc1518f6912e605
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71952
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: David Hendricks <david.hendricks@gmail.com>
|
|
MAINBOARD_BLOBS_DIR is defined the same way by
picasso/cezanne/mendocino/phoenix/glinda and unused by stoneyridge, so
move it to a common area.
This makefile variable is currently only used to locate APCB blobs for
the different mainboards.
Add a Kconfig option to point to the APCB blobs directory. This allows
simple overriding to locations such as site-local.
TEST=Timeless builds
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I0702fdb97fbc2c73d97994ab4d5161ff0f467518
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69410
Reviewed-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com>
Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The dir_location and efs_location have the same meaning. Now the dir
means body.
Change-Id: I02d4dc848f189449b6f0a1eea5cd6b8020a7d101
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71649
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
For future BIOS image entry whose instance = 1.
Change-Id: Iaa40872b270cf9ff289794c8c51c4d8b448d862d
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69151
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
Change-Id: Ib82f6c03b93d277f3f7f27ce57c1a41fdc103575
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change-Id: I7565c5eda75b332a48613440d7e4cfb388d5012f
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69045
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: ritul guru <ritul.bits@gmail.com>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Change-Id: I0a3a3d8b3f898dc147eff54fe4ae2611139951ac
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72143
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Because the EFS is now fixed at 0xff020000, the ChromeOS RO region needs
to be moved to the bottom of the ROM area to cover that space.
The RO Region 6MiB, but you can't actually set 6MiB as RO - it's either
4 or 8MiB, so that's adjusted. To leave some room for the RW_LEGACY
region, the two RW regions are adjusted to 3MiB each, which should be
plenty.
The GBB region had to be moved from the front of the WP_RO region to the
end to avoid conflicting with the EFS, which needs to be inside the
coreboot cbfs area.
Also get rid of AMD_FWM_POSITION_INDEX. The FWM position is no longer
needed.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I683155ec0f4e6a62d862b9e2fa76af45f4cd5493
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71770
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Update the mem_parts_used.txt, generate Makefile.inc and
dram_id.generated.txt for this part.
DRAM Part Name ID to assign
MT62F1G32D2DS-026 WT:B 4 (0100)
K3KL8L80CM-MGCT 4 (0100)
H58G56BK7BX068 4 (0100)
BUG=b:259467147
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot
Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com>
Change-Id: I204e871129a1b15d7c373d579e10a7b9ab6deabe
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71906
Reviewed-by: Caveh Jalali <caveh@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
To make the code slightly easier to read, add a comment about the scope
to the #endif of the outer #ifdef block.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ic2bc83c77750cd8a509f4755fdfa4daaf082d754
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72137
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Caveh Jalali <caveh@chromium.org>
|
|
DEFAULT_SOFTWARE_CONNECTION_MANAGER
Needs to be selected for ChromeOS mainboards even for non-ChromeOS
builds, else Thunderbolt/USB4 doesn't work under Windows (and likely
Linux as well).
TEST=build/boot Windows on drobit/banshee, verify TB functional
Change-Id: Iee3f99840f0c6cc384d9fdef6dff55bcbfc0380f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72140
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Possible Buffer Overflow - Array Index Out of Bounds. Array
regions size is 256 but 'i' iterates from 0 to 256.
Found-by: Klockwork
BUG=None
BRANCH=firmware-brya-14505.B
TEST=Boot to OS
Signed-off-by: Bora Guvendik <bora.guvendik@intel.com>
Change-Id: Iee45a5821b9dd3f9e6f9816599beebf34555426d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72049
Reviewed-by: Hannah Williams <hannah.williams@intel.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the unused fields that were previously used for PCNT and PWRS.
The LIDS field is only used in the ACPI code, but keep if for now, since
it would require a bigger rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b172214998818f841f5694f47815eddfaf9deaa
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72139
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove the unused fields that were previously used for PCNT and PWRS.
The LIDS field is only used in the ACPI code, but keep if for now, since
it would require a bigger rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I79509146431e4584e50af4477f3f50dc3cf01bcf
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72138
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This reverts commit 197d550d069f918698fa7cd8dda73e09fbfda30c.
Reason for revert: breaks TBT and TypeC display on Brya0
Bug=265375098
Branch=firmware-brya-14505.B
Test=Build and boot Skolas board with Brya0 image. Test TBT
and TypeC display functionality.
Change-Id: Ia0283b023949476e90edff7151d605fa36331bfd
Signed-off-by: Anil Kumar <anil.kumar.k@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72081
Reviewed-by: Prashant Malani <pmalani@chromium.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tarun Tuli <taruntuli@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
|
|
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the APL EDS vol 1 (doc 569262) to be able to implement common
code API to clear the power failure status bits.
Note: as per the EDS those newly added power management failure bits
are RO and shouldn't change any functionality of the existing APL SoC
code. The reason behind adding those macro definitions is to fix the
compilation issue due to code change targeted for the Intel SKL and
Xeon-SP.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0bbf11ada2b2f8735173be69ad157b8055021126
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72130
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch adds new macros (i.e. SUS Power Failure and Power Failure)
from the DNV EDS vol (doc 558579) to be able to implement common
code API to clear the power failure status bits.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I6ed962eae79154a8faea382dbe8367133cb05eda
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72134
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
Enable early POST code display on this variant using
the common mc_apl1 baseboard functionality.
BUG=none
TEST=Boot on mc_apl6 and observe that POST codes are
displayed before DRAM training.
Change-Id: I2a52c241c383f8ebcf05052e9bc0ba13e63e3728
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Move logic previously used only in the mc_apl2 variant to
the mainboard level so that other variants can also make
use of it without code duplication.
This functionality on the mc_apl6 variant will be enabled
in a follow-up patch.
BUG=none
TEST=Boot on siemens/mc_apl2 and observe that the POST
codes are displayed before DRAM training.
Change-Id: I762e328ad06c047d911ce1fc40f12a66cbd14e11
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Change-Id: I93455f38663cf29d8b5160ac21c94db08eb44fa9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72146
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I1542c5662162e919752c334baa9c31cddc5036af
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72145
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I3b781c42ef6c23a5dcd31215c14fb9d7104822f2
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Change-Id: I2a4b00d06c92eea1b83002c69d93037f84592393
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72111
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Remove AHCI_ROM_FILE since it's not used and there is no ahci.bin file.
Change-Id: I008c6ac78957500d4ce301fe70f5b6d4a549b573
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Change-Id: Ib5ff87e2f6524ca1be69027080149a3fbe2df7d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72158
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Change-Id: I9a55e1b099a53180e40eedcc52120d65558e7f8b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72157
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch fixes the alignment of the PMC macros defined in the
pm.h file.
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ia8d35a5d104658b7900fde7f7b8c6f88530a614e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72129
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1) Update location of TGP (MAGA) to Params2[15:0]
2) Add TPPA (value of 25W)
Package:
...
Case (0x02)
{
Local0 = Buffer (0x31)
{
0x22, 0x05, 0x10, 0x1C, 0x01
}
CreateWordField (Local0, 0x1D, MAGA)
CreateWordField (Local0, 0x19, TPPA)
CreateDWordField (Local0, 0x15, CEO0)
MAGA = 0x50
TPPA = 0xC8
CEO0 = 0x0200
Return (Local0)
}
...
BUG=b:214581372
TEST=build and verify DSDT on device
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I69b80f4af2ecef6cf91034fc15fb6e8715eeca4f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/69639
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Update setting for touchpad I2C frequency and hold time to meet touchpad
i2c SPEC.
- Frequency: 380 ~ 400 kHz
- hold time : 0.3 ~ 0.9 us
BUG=b:261159229
TEST=On frostflow, touchpad i2c spec from EE measure
Frequencies: I2C0 (Touchpad): 393.7 kHz
Hold time = 0.604 us
Change-Id: Iecf4960a12aa56ac307fb9022e47c4e94a2551c1
Signed-off-by: Rex Chou <rex_chou@compal.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72114
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Even though the register name begins with ESPI, it resides in the SPI
registers and not in the eSPI registers, so add a comment to point this
out to hopefully avoid some confusion.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I9f8d15ceb98f51aad0816021f98ec5c78953e7f3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72122
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Checked against document #57396 revision 1.52 and removed the
DIS_ESPI_MASCTL_REG_WR define, since that bit is marked as reserved.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I3e8b1c65118b4e85e7934e822a7a7e329746a88d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
Checked against both documents #57019 revision 1.59 and #57396 revision
1.50 that the definitions and the code still apply to Phoenix.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Id65301ec730793f41044696f2e99356f2e899137
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72120
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
From Cezanne on, the TMPS, TCRT and TPSV fields are unused in both the C
and ACPI code, so they can be removed. Also remove the unused fields
that were previously used for PCNT and PWRS. The LIDS field is only used
in the ACPI code, but keep if for now, since it would require a bigger
rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ie1c3c25591deadb27b7bf38a81dcd6fe746de55b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72096
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Cezanne on, the TMPS, TCRT and TPSV fields are unused in both the C
and ACPI code, so they can be removed. Also remove the unused fields
that were previously used for PCNT and PWRS. The LIDS field is only used
in the ACPI code, but keep if for now, since it would require a bigger
rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I5a9b0a24f57a81b98c7553517fe5f25ff63c5316
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72095
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Cezanne on, the TMPS, TCRT and TPSV fields are unused in both the C
and ACPI code, so they can be removed. Also remove the unused fields
that were previously used for PCNT and PWRS. The LIDS field is only used
in the ACPI code, but keep if for now, since it would require a bigger
rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I884d6a7dedb73028f8942fdda86b0c9910fa996a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72094
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
From Cezanne on, the TMPS, TCRT and TPSV fields are unused in both the C
and ACPI code, so they can be removed. Also remove the unused fields
that were previously used for PCNT and PWRS. The LIDS field is only used
in the ACPI code, but keep if for now, since it would require a bigger
rework to remove it from the global NVS.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: Ib4034e959d167fb1e08ee5b15e21fb93bc89db8a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72093
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
All field definitions in the IndexField object match both the info in
the PPR #57243 revision 3.02 and also match the defines in soc/amd/
mendocino/include/soc/amd_pci_int_defs.h. The IndexFieldvonly defines
the subset of the IRQ mapping registers that are used or likely needed
in the future. This is handled in the same way for the other AMD SoCs.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I6b0adfecc99945de69b4853f4423b4c10951d3e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72092
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: If44a07503470f57037b59d03eea830703a3c604a
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72100
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
With the addition of the mc_ehl3 board variant, a few
points about commenting the code arose either from the
review or during the implementation itself.
This patch unifies structure of these files, which
have a similar structure across more Siemens boards
utilizing the PTN3460 eDP-to-LVDS bridge.
BUG=none
TEST=Check that images for the affected boards can be
built.
Change-Id: I59820362e1f87e296c5548b9c3cecba4d2710fe7
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72068
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This board contains in addition to its base variant, mc_ehl2,
an LCD panel driven through the PTN3460 eDP-to-LVDS bridge.
This patch enables the PTN3460 support by adding the device to
devicetree.cb and board-specific configuration parameters in
lcd_panel.c, based upon a similar implementation in siemens/mc_apl7.
BUG=none
TEST=Boot with the LCD panel attached and observe whether
the picture is stable and free of artifacts coming from wrong
resolution, timing etc.
Change-Id: Ib8a1a6f47053406e42554c2dd33684165d54be08
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/70692
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
1. Enable multiple GPIOs to support the touch panel.
2. Add I2C setting for touch panel.
BUG=b:260818082, b:264812909
BRANCH=firmware-brya-14505.B
TEST=emerge-brask coreboot
Change-Id: I2b805d1960f8b4e3e27f1af02f9c4d31f973288f
Signed-off-by: Mike Shih <mikeshih@msi.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71782
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
Remove TODO comment after reviewing against mendocino ppr #57243, rev
3.00
BUG=b:263563246
Signed-off-by: Fred Reitberger <reitbergerfred@gmail.com>
Change-Id: I9a89751df71eb32b2c8d99c568341dd669b5f065
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72073
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I8432d799c9bf23058b7b903bb07f6c2b4308eeba
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72103
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: Ifab3fcd2de8f0c1672d1a9a21c8e0c5dba5b7443
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72077
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: Id2b408e24f74367777b1b949623d6692f2f19e6d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72076
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: I7bd29bab2c77da2ffe86167d54e87c9941355ea7
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72075
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
Change-Id: I421602c81d9a186eb36a289d6e5048b5aa343a2d
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72074
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
|
|
The {read,write}{16,32}() functions used in this file come from the
mmio.h header, so include it directly.
BUG=none
TEST=Read out the SD card controller (device 1a.1) PCI registers
in Linux and check whether the values reflect the ones defined
in this file.
Change-Id: Iff7b55ef2bf98371b7d7d9114ccf3ebed64772a2
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72009
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
Use acpi_align_current to align the ACPI tables on a 16 byte boundary.
This changes the alignment of the HEST, IVRS, SRAT and SLIT tables from
8 bytes to 16 bytes. The alignment of the ALIB and PSTATE SSDT tables
was already 16 bytes before, so the alignment of those isn't changed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8933e3731b67012bcae0773db2f7f8de7cd31b56
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72055
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduce at new config option CONFIG_FSP_PUBLISH_MBP_HOB to
control the creation of ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
This new option is hooked with `SkipMbpHob` UPD and is always
disabled for ChromeOS platforms.
This made skip_mbp_hob SOC chip config variable redundant
which is also removed as part of this change.
BUG=none
TEST=Build and boot to Google/Rex.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Iaba1ea29a92a63d2b287e1ccdea1a81ec07b9971
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Currently most of the FSP debug messages (when enabled) are truncated
due to insufficient size of cbmem buffer.
Increase premem cbmem console size to 0x16000 bytes and cbmem buffer
size to 0x100000 bytes so that cbmem buffer can contain most of the
debug logs when FSP debug messages are enabled.
BUG=b:265683565
TEST=Verify output of 'cbmem -c' when FSP debug messages are enabled
but MRC debug message.
Note: Still 350/2200 lines of premem messages are missing.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: I120423e1dd2bc468cf9cec6da1246ac3c0a155e5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72048
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Current size of the cbmem buffer (128KB) is insufficient to contain the
complete debug logs which is more than 166KB hence, cbmem console buffer has wound off to contain the maximum possible debug messages within the allocated buffer as results, we are seeing truncated debug message while looking into the cbmem console.
This patch increases cbmem buffer size to 256KB so that the complete
debug log can be stored in it.
BUG=b:265683565
TEST=Make sure that logs from all the boot stages can be seen using
'cbmem -c'.
Signed-off-by: Kapil Porwal <kapilporwal@google.com>
Change-Id: Ibeabb61d60491b831252b7161c9d3181fbe09e73
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72047
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Usha P <usha.p@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the dxio_tx_vboost_enable for frostflow in coreboot.
It needs to confirm the PCIe Signal Integrity after enabled.
BUG=b:259007881, b:248221908
BRANCH=none
TEST=emerge-skyrim coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: Iaac331737c83ac7a4a1261c32151359e126a009e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71926
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
This patch supports projects to use _DSM to control USB3 U1/U2
transition per port.
More details can be found in
https://web.archive.org/web/20230116084819/https://learn.microsoft.com/en-us/windows-hardware/drivers/bringup/usb-device-specific-method---dsm-
The ACPI and USB driver of linux kernel need corresponding functions
to support this feature. Please see
https://git.kernel.org/pub/scm/linux/kernel/git/mnyman/xhci.git/log/?h=port_check_acpi_dsm
BUG=b:253402457
TEST=tested on felwinter and found _DSM method is created.
Change-Id: Iffb2498e26352a3f120c097c50587324e311e8ba
Signed-off-by: Kane Chen <kane.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71924
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
|
|
Allow SSPM to access PWRAP interface.
BUG=b:254566089
TEST=build pass and boot to OS.
Change-Id: I4b134983dcde1cc293f4b798f91b997baf96d299
Signed-off-by: Sen Chu <sen.chu@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72043
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Intel Ice Lake is unmaintained and the only user of this platform ever
was the Intel CRB (Customer Reference Board). As it looks like, it was
never ready for production as only engineering sample CPUIDs are
supported.
As announced in the 4.19 release notes, remove support for Intel
Icelake code and move any maintenance on the 4.19 branch.
This affects the following components and their related code:
* Intel Ice Lake SoC
* Intel Ice Lake CRB mainboard
* Documentation
Change-Id: Ia796d4dc217bbcc3bbd9522809ccff5a46938094
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72008
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Turn on the dxio_tx_vboost_enable for markarth in coreboot.
It needs to confirm the PCIe Signal Integrity after enabled.
BUG=b:263534907, b:263216451
BRANCH=none
TEST=emerge-skyrim coreboot chromeos-bootimage
Signed-off-by: Frank Wu <frank_wu@compal.corp-partner.google.com>
Change-Id: I0798c1d9788e1911c2643bf387722b072aa79045
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71931
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com>
Reviewed-by: John Su <john_su@compal.corp-partner.google.com>
Reviewed-by: Chao Gui <chaogui@google.com>
|
|
Change MAINBOARD_PART_NUMBER Kconfig value for mc_ehl3
from "MC_EHL3" to "MC EHL3".
Change-Id: Ie548607c5fb62faaed4921af714bc9b912e558a8
Signed-off-by: Jan Samek <jan.samek@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71775
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Change-Id: I1d9d123d2a29178541ab24c70ba529f6bfa2b6c8
Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72010
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
|
|
The parameter 'maxlen' can be a bit confusing as it actually is
referring to the size of the destination memory block where the
requested parameter is stored to. Rename it to 'dstsize' and change
the type to size_t to be more clear here.
In addition, add a comment line for this parameter in the description
of the function 'hwilib_get_field()'.
This patch has no impact to the generated binary (checked with timeless
build).
Change-Id: I572dc0f3ff3d0c177d608332a88991396b82c2fd
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72045
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Jan Samek <jan.samek@siemens.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
|
|
This is the list generated by util/vboot_list/vboot_list.sh
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ib782a676fed312a2c84e89914f871984a289f610
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72003
Reviewed-by: Felix Singer <felixsinger@posteo.net>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Wlan power enable pin is changed from EN_PP3300_WLAN to SLP_SUS_L.
Remove unused RTD3 driver.
BUG=b:263448873
BRANCH=firmware-brya-14505.B
TEST=emerge-brya coreboot chromeos-bootimage
Signed-off-by: Frank Chu <Frank_Chu@pegatron.corp-partner.google.com>
Change-Id: I22448a8cb28ddadb93b114c096e364980feab6fd
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71693
Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
Reviewed-by: Frank Chu <frank_chu@pegatron.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Skyrim doesn't use the firmware TPM, so remove the binary from the
image.
Note that because this was not used, removing it doesn't change the boot
time.
BUG=None
TEST=Boot
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: Ia627b128c3346a2556c5306de7506519d1f2d70c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72002
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
As per the code style there is no space before the opening brace of a
function declaration. Delete the space in hwilib.c and hwilib.h.
Change-Id: Ie122ccd2dbae97f595463a097826d3415718a8bc
Signed-off-by: Werner Zeh <werner.zeh@siemens.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72044
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Since commit d5ab24cd4800 ("soc/amd/common/acpi/cppc: add nominal and
minimum frequencies") the fields that got added in CPPC version 3 get
populated, so remove the now outdated comment about the fields added in
version 3 always being set to CPPC_UNSUPPORTED.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4c975b42fc4f67329170801b871d6bbdf9637d04
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72046
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|
|
Add a INFO print indicating that we did infact attempt to display the
MRC training message to the user.
BUG=b:252792591
BRANCH=firmware-brya-14505.B
TEST=Print seen in cbmem -c
Signed-off-by: Tarun Tuli <taruntuli@google.com>
Change-Id: I1a20fb221aa2fa0eeaf9b7f8cf3d8a8ab0b91133
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71284
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
|
|
The Picasso SoC code generates a CRAT ACPI table which is not done for
Cezanne and newer. A significant part of the Picasso CRAT generation
code can likely be moved to the common AMD SoC code and then used in all
SoCs, but this still needs to be checked.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I8f1ebe74f0376c60396dbd80e64676d1374ed811
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72027
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This changes the alignment of the IVRS table from 8 bytes to 16 bytes
and aligns the ALIB table to a 16 byte boundary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I965791fbbe499702e191dcbf1f5fbfcb5e1bab6b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72026
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This changes the alignment of the IVRS table from 8 bytes to 16 bytes
and aligns the ALIB table to a 16 byte boundary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I766260aefcac6876609d6b45202b41a3e9e44385
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72025
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This changes the alignment of the IVRS table from 8 bytes to 16 bytes
and aligns the ALIB table to a 16 byte boundary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I2b48a7cbed84551e7651992589c38eac54f27d1f
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72024
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This changes the alignment of the IVRS table from 8 bytes to 16 bytes
and aligns the ALIB table to a 16 byte boundary.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I4de66ab11508814da5d7fb440a1083a52551bcf5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This makes sure that the ALIB table is aligned on a 16 byte boundary.
TEST=Mandolin still boots Linux and the position and size of the ACPI
tables in memory shown by dmesg hasn't changed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I90781ef98b729c0a8d1f5dde46fc9ca5d08618b3
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
This changes the alignment of the CRAT and IVRS tables from 8 bytes to
16 bytes.
TEST=Mandolin still boots Linux and the position and size of the ACPI
tables in memory shown by dmesg hasn't changed.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I88df331c8410d8dca41a414543f051f5e4656ff1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/72021
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Ib43d3402f94f47dc576fb99a6b2a7acf6f0af220
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71982
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/dragonegg.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0e5a6e54abc7c03a2fbffa308db20c392e2a600b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71983
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/dedede.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: Id2c1f24a8fa54eea512b5bd3dd91423f9892687d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71984
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
|
The patch fixes indication of incorrect `prev_sleep_state` on the next
boot after global reset trigger. The existing code misses an important check about `if PCH doesn't set the WAK_STS` while checking power
failure. As a result, every early warm/global reset is considered
as power failure after looking into the PMC MMIO CON-A register
alone (as ignoring the ACPI PM_CTRL.WAK_STS bit).
As per the code comment this code logic is expected to check the power
failure reason if PCH doesn't set the WAK_STS while waking from G3
state.
TEST=Able to build and boot google/volteer.
Without this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 5` although the SLP_TYP is zero and WAK_STS bit
is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 5
With this patch:
Observation: Resuming after a warm reset is considered as
`prev_sleep_state 0`. It matches with the SLP_TYP is zero and
WAK_STS bit is set.
pm1_sts: 8100 pm1_en: 0000 pm1_cnt: 00000000
GEN_PMCON: d1215238 00002200
....
prev_sleep_state 0
Signed-off-by: Subrata Banik <subratabanik@google.com>
Change-Id: I0e48b110826f16d13d18c138fce03a56c85b9d1c
Reviewed-on: https://review.coreboot.org/c/coreboot/+/71985
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
|
