summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-28mb/system76/lemp9: Relocate device enable optionsFelix Singer
Built with BUILD_TIMELESS=1, resulting coreboot.rom does not change. Change-Id: I655bc7576e8ff48258a2a19387e01372f4bbea3d Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner
2020-07-28mb/google/volteer: sync'ing todor with terradorYH Lin
Todor is created to take the place of terrador therefore copying terrador content into todor's setup. BUG=b:162110806 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TODOR Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I63151728a04f2252ca8a77158a2656ad8b1e1b51 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43841 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2020-07-28mb/google/volteer: Create todor variantYH Lin
Create the todor variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). In addition, * sort the variant names in alphabetical order. * todor uses the same config options as terrador. BUG=b:162110806 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_TODOR Signed-off-by: YH Lin <yueherngl@google.com> Change-Id: I7aa7acf1f3c3cc14b92ded05d5868818a627a432 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-28mb/ocp/deltalake: use common driver to configure GPIOBryant Ou
Use the common driver to configure the GPIOs on the Delta Lake platform as done for Tioga Pass in commit 89d2aa0. The GPIO settings are dumped by inteltool with original UEFI firmware, then use intelp2m to generate header file. TEST=Dump GPIO settings by Intel ITP and check if match gpio.h. Change-Id: I8005d4caa2d87b6831099bfec3a40246224f3cb5 Signed-off-by: Bryant Ou <Bryant.Ou.Q@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43548 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-28broadwell: Factor out PIRQ routing from devicetreeAngel Pons
All boards disable PIRQs, except purism/librem_bdw. Since IRQ0 is invalid and modern OSes don't use PIRQ routing, disable the PIRQs. Change-Id: I93b074474c3c6d4329903cab928dc41e1d3a3fb3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43868 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28lynxpoint: Factor out PIRQ routing from devicetreeAngel Pons
All boards disable PIRQs. They aren't used on modern OSes anyway. Change-Id: I1351fd4a3910e8cf2e9afe51dc2e82c7464de403 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-28soc/intel/cannonlake: Configure SataPwrOptEnable only if SATA is enabledFelix Singer
Change-Id: I522dc7287c85b304f6fc62c0c554e4d062c3c61c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner
2020-07-28soc/intel/apollolake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: Ieeec987dc2bfe5bdef31882edbbb36e52f63b0e6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43899 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28soc/intel/jasperlake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: I744939bee3d51ac25c1cc2dcd3359fe571c9e408 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43898 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28soc/intel/tigerlake: Simplify is-device-enabled checksFelix Singer
Simplify if-statements and use is_dev_enabled() where possible. Change-Id: I791273e5dd633cd1d6218b322106e2f62a393259 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43897 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-28Revert "src: Remove unused include <cpu/x86/smm.h>"Patrick Rudolph
This reverts commit 6f739184dd153e0f7c3fa42990e008578b51b2c1. Fixes compiling the SMMSTORE driver. Change-Id: I3b4d4063ded50529bea48f8d865c1689fe9e26d1 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43970 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Michael Niewöhner Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-28volteer: Create eldrid variantMiceLin
Create the eldrid variant of the volteer reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:162115131 BRANCH=None TEST=util/abuild/abuild -p none -t google/volteer -x -a make sure the build includes GOOGLE_ELDRID Signed-off-by: MiceLin <mice_lin@wistron.corp-partner.google.com> Change-Id: I1cd07ee7a87335e1e0b51d65c26bffc3bc46037c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43797 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-27soc/amd: Use spi_writeX & spi_readX for all spi accessesMartin Roth
BUG=b:161366241 TEST=Build & boot Trembyle Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ied7789e9315c75174df9a686c831c5a969ce3bfe Reviewed-on: https://review.coreboot.org/c/coreboot/+/43773 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-27soc/amd/common: Move spi access functions into their own fileMartin Roth
Because there was a lot of discussion about the size increase, I also looked at the impact of calling the get_spi_bar() function vs reading spi_base directly and just not worring about whether or not spi_base was already set. Using the spi_base variable directly is 77 bytes bytes for all 6 functions. it's roughly double the size to call the function at 153 bytes. This was almost entirely due to setting up a call stack. If we add an assert into each function to make sure that the spi_base variable is set, it doubles from the size of the function call to 333 bytes. For my money, the function call is the best bet, because it not only protects us from using spi_base before it's set, it also gets the value for us (at least on x86, on the PSP, it still just dies.) BUG=b:161366241 TEST: Build Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I0b0d005426ef90f09bf090789acb9d6383f17bd2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43772 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2020-07-27soc/amd/picasso: Set __USER_SPACE__ for psp_verstageMartin Roth
Mark that psp_verstage is running in userspace so that it won't run the code in dcache_clean_all() and hang the system. BUG=b:161554141 TEST=Run board through a bunch of recovery cycles. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I936dcec18a2be9ec8636ce77bb0954f4fc58153e Reviewed-on: https://review.coreboot.org/c/coreboot/+/43785 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-27arch/arm/armv7: Make null dcache_apply_all macro for userspaceMartin Roth
Make an empty macro for dcache_apply_all for code running in userspace so that we don't hang the system. BUG=b:161554141 TEST=Run board through a bunch of recovery cycles. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I3dc0f40dfe4d4a699528068154eee2d3c23d3d74 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43787 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-27include/rules.h: Add ENV_USER_SPACE definitionMartin Roth
This lets code that run in userspace notify coreboot of that fact so things that can't run in userspace can be excluded. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I4da414bc96cfcf0464125eddc6b3f3a7b4506fcf Reviewed-on: https://review.coreboot.org/c/coreboot/+/43784 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27mb/amd/mandolin: add USB over-current pin mapping to devicetreeFelix Held
The over-current pin mapping matches the board schematics. Change-Id: I23fd208680dcb52f5adaa144f00cb46bc7a21b91 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43834 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-27soc/amd/picasso: make USB over-current pin mapping configurableFelix Held
Neither the family 17h model 10-1Fh PPR nor the internal FSP source seems to have the mapping of the USB OC pins to the four bit values, so this is based on the information from the family 15h model 70-7Fh BKDG which also corresponds to what I'd have expected here. BUG=b:162010077 Change-Id: I581ef1d730e9d729d9849d7e73ef1c1b67b2c4cf Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43833 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-27mb/google/hatch: Add smart battery I2C passthrough for DratiniTim Wawrzynczak
Some smart battery patches have been backported to the ChromeOS 4.19 kernel, and userspace can now access smart battery data from sysfs instead of using the hacky ectool instead. Also change all space indents into tab indents while we're here. BUG=chromium:1047277 TEST=confirmed a /sys/class/power_supply/sbs-i2c device shows up Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I43687e63e4c1a7756c117129ced20749afc1b9e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43451 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-273rdparty/vboot: Update submodule pointer to upstream masterPaul Menzel
Building depthcharge master currently fails as depthcharge commit 74ca8ae5 (depthcharge: Hide dev mode timeout description) changed the function signature according to vboot commit 59fd331b (vboot/ui: pass timer_disabled to vb2ex_display_ui()), which is not yet present in the vboot checkout: $ make […] CC drivers/ec/vboot_auxfw.depthcharge.o src/drivers/ec/vboot_auxfw.c: In function 'display_firmware_sync_screen': src/drivers/ec/vboot_auxfw.c:117:5: error: too many arguments to function 'vb2ex_display_ui' vb2ex_display_ui(VB2_SCREEN_FIRMWARE_SYNC, ^~~~~~~~~~~~~~~~ In file included from /dev/shm/coreboot-1/3rdparty/vboot/firmware/include/vb2_api.h:18, from src/drivers/ec/vboot_auxfw.c:17: /dev/shm/coreboot-1/3rdparty/vboot/firmware/include/../2lib/include/2api.h:1262:13: note: declared here vb2_error_t vb2ex_display_ui(enum vb2_screen screen, ^~~~~~~~~~~~~~~~ So update the submodule pointer from commit 68de90c7 (Allow building for non-CrOS environments) to commit ed23c084 (Reset EC when transitioning to dev mode). This brings in 7 new commits. Change-Id: Icd5408fb824fc5da470774b7f493b916dff17832 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43517 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Joel Kitching <kitching@google.com>
2020-07-27mb/google/kukui: Add discrete LPDDR4X DDR table support for burnet/escheKevin Chiu
LPDDR4x DRAM table for burnet/esche: [1] = "sdram-lpddr4x-H9HCNNNCPMALHR-4GB" [2] = "sdram-lpddr4x-MT53E1G32D4NQ-4GB" [3] = "sdram-lpddr4x-K4UBE3D4AA-MGCL-4GB" [4] = "sdram-lpddr4x-H9HCNNNCPMMLXR-NEE-4GB" BUG=b:161768221,b:159301679 BRANCH=master TEST=emerge-jacuzzi coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ida7ab877c3f7e10a67680b69a1d724ec734d2928 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43752 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Hung-Te Lin <hungte@chromium.org>
2020-07-27soc/intel/jasperlake: Invoke PCIe root port swappingKarthikeyan Ramasubramanian
Invoke PCIe root port devicetree update to swap the enabled root port devices with the disabled devices. BUG=b:162046161 TEST=Ensure that the PCIe device 1c.7 corresponding to Root port 8 is swapped with the PCIe device 1c.0 corresponding to Root port 1. Change-Id: I7d422014a2f5cafc41296ce0a2c116c82aefb0d7 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43835 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27mb/google/volteer: Add gpio-keys ACPI node for PENHAlex Levin
Use gpio_keys driver to add ACPI node for pen eject event. Also setting gpio wake pin for wake events. Removal and insertion (both edges) triggers IRQ and only removal is a wake event (rising edge). Adding for both Volteer and Volteer2 variants. BUG=b:146083964 BRANCH=None TEST=tested on a Volteer Change-Id: Ida3217a5b156320856ce3302c2623eba2230f28d Signed-off-by: Alex Levin <levinale@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43764 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27mb/google/volteer: Modify Delbin variantKane Chen
Update delbin configuration include GPIO, memory SPD table, I2C devices and USB type C. BUG=b:158797761 BRANCH=None TEST=emerge-volteer coreboot Signed-off-by: Kane Chen <kane_chen@pegatron.corp-partner.google.com> Change-Id: I59ce4720e0ffeeeb2c9440bb300686def80211ea Reviewed-on: https://review.coreboot.org/c/coreboot/+/42301 Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-27mb/google/dedede: Remove Rcomp resistor and target valuesMeera Ravindranath
MRC automatically detects the DDR type and sets Rcomp resistor and target values for JSL and does not require explicit programming. Change-Id: Ia130765e2cb91d6a39ad00ebbab20e7e87fa42d1 Signed-off-by: Meera Ravindranath <meera.ravindranath@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43761 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-27dedede: Create magolor variantRen Kuo
Create the magolor variant of the waddledee reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.1.1). BUG=b:58540772 BRANCH=None TEST=util/abuild/abuild -p none -t google/dedede -x -a make sure the build includes GOOGLE_MAGOLOR Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Change-Id: I3e39e650b82a0aa629a48a00227700b058effb34 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43803 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-27util/lint/Kconfig_lint: Update Naked BOOL reference to errorMartin Roth
The lint-stable makefile target only watches for errors in the Kconfig file, so has not protected additional "Naked" references to BOOL type Kconfig symbols from entering the tree. Update it to an error so that they can't continue coming into the codebase. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Icce2a9a627c4fbcaa220df18474cb8bfea8b2a8c Reviewed-on: https://review.coreboot.org/c/coreboot/+/43826 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26util/inteltool/gpio_names: Make group and community titles consistentBenjamin Doron
Consistency is good for scripting and automation. The lowercase "group" in Sunrise Point-LP, for example, was breaking pattern matching used in intelp2m. Change-Id: Iffa8a8ac9c17c5cbd8d7b838d9c703cae6a858b5 Signed-off-by: Benjamin Doron <benjamin.doron00@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43068 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/intel/cedarisland/Makefile: Add missing ramstage.cMaxim Polyakov
Fixes a bug in Makefile.inc, which did not allow building ROM image with ramstage.c from motherboard configuration. Change-Id: I70d8a2e1f53e2fa56d514361116a55f175407753 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43457 Reviewed-by: Andrey Petrov <andrey.petrov@gmail.com> Reviewed-by: Lance Zhao Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/tigerlake: Disable CPU PCIe in FSPShaunak Saha
In TGL SoC we have PCH and CPU side PCIe support. This patch skips CPU side PCIe enablement in FSP if device is disabled in devicetree. Disabling the initialization of CPU PCIe saves ~30ms in FspSiliconInit! BUG=b:158573805 BRANCH=None TEST=Build and boot volteer and TGL RVP. Using cbmem tool measure the boot time. FspSilicontInit time is reduced by ~30ms with this patch. Signed-off-by: Shaunak Saha <shaunak.saha@intel.com> Change-Id: I7e8512d22b1463bc4207f80b16dcfb5d00ef4b46 Reviewed-on: https://review.coreboot.org/c/coreboot/+/42557 Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/*/*/devicetree.cb: Normalize disabled PIRQ valuesAngel Pons
If bit 7 of a PIRQ route is set, it is disabled. Modern OSes don't use PIRQ routing, so we might as well zero the other bits for consistency. Tested on Asrock B85M Pro4 with SeaBIOS 1.13.0, still boots. Change-Id: I78980b9ea5e878a6200df0f6c18c5e7d06a7950a Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43861 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/tigerlake: Disable VT-d and no DMAR table for pre-QS platformJohn Zhao
Enabling VT-d on pre-QS silicon may have issues like rendering the Thunderbolt driver useless. This change will ensure that VT-d is disabled for pre-QS silicon and enabled for QS. BUG=b:152242800,161215918,158519322 TEST=Validated VT-d is disabled for pre-QS (cpu:0x806c0) and enabled for QS (cpu:0x806c1). Kernel walks through ACPI tables. If VT-d is disabled and no DMAR table exists, IOMMU will not be enabled. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I98a9f6df185002a4e68eaa910f867acd0b96ec2b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43657 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-26soc/intel/common/basecode: Implement CSE update flowRizwan Qureshi
The following changes are done in this patch: 1. Get the CSE partition info containing version of CSE RW using GET_BOOT_PARTITION_INFO HECI command 2. Get the me_rw.version from the currently selected RW slot. 3. If the versions from the above 2 locations don't match start the update - If CSE's current boot partition is not RO, then * Set the CSE's next boot partition to RO using SET_BOOT_PARTITION HECI command. * Send global reset command to reset the system. - Enable HMRFPO (Host ME Region Flash Protection Override) operation mode using HMRFPO_ENABLE HECI command - Erase and Copy the CBFS CSE RW to CSE RW partition - Set the CSE's next boot partition to RW using SET_BOOT_PARTITION HECI command - Trigger global reset - The system should boot with the updated CSE RW partition. TEST=Verified basic update flows on hatch and helios. BUG=b:111330995 Change-Id: I12f6bba3324069d65edabaccd234006b0840e700 Signed-off-by: Rizwan Qureshi <rizwan.qureshi@intel.com> Signed-off-by: Sridhar Siricilla <sridhar.siricilla@intel.com> Signed-off-by: V Sowmya <v.sowmya@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/35403 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/lenovo: Prepend EC event number with 0x to denote hex notationPaul Menzel
Currently, the message below is printed, suggesting it’s decimal notation: coreboot-4.12-1530-g7acbd5fc45 Sun Jul 19 07:47:58 UTC 2020 smm starting (log level: 7)... EC event 48 GPI (mask 1000) Prepend 0x, so it’s clear it’s hexadecimal notation. EC event 0x48 Use the command below change all places: git grep -l 'EC event %02x' | xargs sed -i 's/EC event %02x/EC event %#02x/' Change-Id: I8d1e6434a0e550c5a19576f9f7fea05e7a812e49 Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26ec/lenovo/h8: Align macro values in one columnPaul Menzel
Change-Id: I5691a582d9a195317994413fff4fd3273413b5fe Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43586 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26cpu/intel/car/romstage.c: Remove unused <bootblock_common.h>Elyes HAOUAS
Change-Id: Ib47497cf8576063d42bc4a1dd2cc2e0fc56868d3 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42350 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/include: Remove unused 'include <stddef.h>'Elyes HAOUAS
Change-Id: I525eb58669d256286e8476b12174d37d1d9aa3bf Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/include: Add missing includesElyes HAOUAS
Change-Id: I746ea7805bae553a146130994d8174aa2e189610 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43368 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26soc/amd/common/block/psp/psp_smm.c: Add missing <string.h>Elyes HAOUAS
'memset' needs <string.h>. Change-Id: Idc1d72e92c97cd5139ae7439aadb575ef011129a Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42342 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26sb/amd/agesa/hudson/hudson.h: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I709b98e57275a5666a9627af9f57a7d47c855c88 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43712 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26nb/amd/pi/00730F01/northbridge.c: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I20526f20d9528dd1fce20bcae933e04aea3d24f9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43711 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/drivers/intel/soundwire/soundwire.h: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: Icf8b77713e7b5deb9def19c3e14e89a40ba46107 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43710 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/soc/qualcomm: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I6b89bd9616b3f091d6694f9cc20b4bd1a74aad3b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43709 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/soc/mediatek: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I8e4a7af68a52d82117b8b091fa448bb6ad40ae7d Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43708 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/soc/intel: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I674e3e423e06ee869366ebbd7c9d4248a2f3d9d9 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/acpi/device.c: Add include <types.h>Elyes HAOUAS
BIT(x) needs <types.h>. Change-Id: I1a7c5e15468b76e29aa32169fd8ca10445c2eff2 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43704 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/intel/dptf: Remove prompts from DPTF config optionsTim Wawrzynczak
The prompts for the DPTF Kconfig options were not necessary, they should be selected based on what DPTF implementation is being used, ASL files or generated at runtime. It's not really meant to be fiddled with at build-time. Also rewrite the help text for the _HID selection, to try and make it more clear when to use y or n. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I6edcabd28426916d9586d501b95b510dfc163fc1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43830 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIGMaxim Polyakov
This macro is not correct because the RX Level/Edge Configuration (trig) and the GPIO Tx/Rx Buffer Disable (bufdis) fields in DW0 register do not affect on the pad in the native function mode. This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: Ic0416e3f67016c648f0886df73f585e8a08d4e92 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43569 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao Reviewed-by: Michael Niewöhner
2020-07-26mb/asrock/h110m: undo set trig and bufdis for NF padsMaxim Polyakov
According to the documentation [1], RX Level/Edge Configuration (trig) and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable in native mode and BIOS does not need to configure them. Therefore, there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG macros. Use PAD_CFG_NF instead and set this fields to 0. [1] Intel document #549921 [2] Intel document #336067-007US This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: I6a6b745bdaacb1c4fbf032e4ce54cb25a72d790a Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43561 Reviewed-by: Michael Niewöhner Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/ocp/tiogapass/gpio: undo set trig and bufdis for NF padsMaxim Polyakov
According to the documentation [1], RX Level/Edge Configuration (trig) and GPIO Tx/Rx Buffer Disable (bufdis) [2] settings are not applicable in native mode and BIOS does not need to configure them. Therefore, there is no need to configure this in gpio.h using PAD_CFG_NF_BUF_TRIG macros. Use PAD_CFG_NF instead and set these fields to 0. [1] Intel document #549921 [2] Intel document #336067-007US This is part of the patch set "src/mb/*, src/soc/intel/common/gpio: Remove PAD_CFG_NF_BUF_TRIG ": CB:43455 - cedarisland: undo set trig and bufdis for NF pads CB:43454 - tiogapass: undo set trig and bufdis for NF pads CB:43561 - h110m: undo set trig and bufdis for NF pads CB:43569 - soc/intel/common/gpio_defs: Remove PAD_CFG_NF_BUF_TRIG Change-Id: Icdb6cb39934548e125461929701b33477a74f2a2 Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43454 Reviewed-by: Michael Niewöhner Reviewed-by: Lance Zhao Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/volteer/var/terrador: Support ELAN i2c-hid touchpadDavid Wu
Update ELAN i2c-hid touchpad configuration BUG=b:160741785 BRANCH=None TEST=Verify touchpad is working fine. Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I098d8a305c6e04af1562a545ff4af6383665798b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43509 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Caveh Jalali <caveh@chromium.org>
2020-07-26mb/purism/librem_skl: Disable CLKREQ for NVMeMatt DeVillier
This effectively reverts commit 5086ccef (mb/purism/librem_skl: Fix CLKREQ for 15v3 NVMe). Some Librem 15v3/v4 boards are showing issues with NVMe detection or booting via SeaBIOS, so revert this until a proper fix can be found. Test: build / successfully boot Librem 15v4 with problematic NVMe drive. Change-Id: I0659f77bbe693f3d3b192a28ff3ef013658930cc Signed-off-by: Matt DeVillier <matt.devillier@puri.sm> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43490 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/kukui: send SKU ID to EC for device-specific configurationHung-Te Lin
For devices sharing same firmware, there may be few customization based on SKU ID - for example being clamshell or form factor. On Kukui and Jacuzzi platforms the SKU ID is defined on AP SOC, so we have to send the information to EC. BUG=b:161767717 TEST=make -j # builds and boots on Juniper BRANCH=kukui Change-Id: I8ffdd9fd1e609c1dd4b0e22dc7aab560ccdc842e Signed-off-by: Hung-Te Lin <hungte@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43788 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/intel/common/hda: Add HDA ID for Jasper Lakeyan.liu
Currently, audio is not working on Boten, caused by the coreboot HDA driver not being run as the Jasper Lake PCI ID is missing. So, add the Jasper Lake ID. BUG=b:160651126 BRANCH=NONE TEST=Connect speaker to audio jack, and verify sound is played. Signed-off-by: Yan Liu <yan.liu@bitland.corp-partner.google.com> Change-Id: Ib62c332d8d87201b3e6903251d824e1c3e06cd68 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43441 Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Peichao Li <peichao.wang@bitland.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/mainboard/dedede: update GPIO table for Botenyan.liu
Adjust GPIO setting to match boten design BUG=b:160741777 BRANCH=NONE TEST=Add gpio.c for boten Signed-off-by: Yan Liu <yan.liu@bitland.corp-partner.google.com> Change-Id: I4eafee608f657f8ec5a06caf6e99b08b3330512b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43277 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/dedede: Change HDMI DDC GPIOs to native functionMaulik V Vaghela
HDMI DDC GPIOs were configured as NC till now in waddledoo. This may cause HDMI i2c transfer to break and EDID read will fail due to wrong configuration Configuring these GPIOs as NF in coreboot to fix the issue. BUG=b:160324327 BRANCH=None TEST=HDMI works on DDI2 onn Type-C port Change-Id: If02f062132d7c3b01b07ea9401e81f451df35c3c Signed-off-by: Maulik V Vaghela <maulik.v.vaghela@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43294 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/vilboz: Tune I2C bus 3 clockpeichao.wang
Tune I2C bus3 frequency and insure it meets I2C spec. BUG=b:161650117 TEST=flash coreboot to the DUT and actual measured I2C bus3 make sure it meet Spec. Signed-off-by: Peichao Wang <peichao.wang@bitland.corp-partner.google.com> Change-Id: Ifa9f0bce723f55a12fd2313788c995f8326e3e7d Reviewed-on: https://review.coreboot.org/c/coreboot/+/43661 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/mrc_cache: Avoid unused variable assignmentPaul Menzel
Fix the scan-build warning below: CC romstage/drivers/mrc_cache/mrc_cache.o src/drivers/mrc_cache/mrc_cache.c:450:26: warning: Value stored to 'flash' during its initialization is never read const struct spi_flash *flash = boot_device_spi_flash(); ^~~~~ ~~~~~~~~~~~~~~~~~~~~~~~ 1 warning generated. The function can return early before the value is read. Fix this, by getting rid of the variable, as the value is only read once. Change-Id: I3c94b123f4994eed9d7568b63971fd5b1d94bc09 Found-by: scan-build (clang-tools-9 1:9.0.1-12) Signed-off-by: Paul Menzel <pmenzel@molgen.mpg.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42798 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2020-07-26soc/intel/jasperlakelake: Rename pch_init() codeUsha P
Rename the pch_init function to bootblock_pch_init and romstage_pch_init according to the stage it is defined in. TEST=Able to build and boot Waddledoo successfully. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: Iaa0a41f3b5972251d6cd9359bbb46d392196b2e2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43479 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26southbridge/intel/common: Replace outb with post_code in finalize.cSindhoor Tilak
The outb() call is replaced with the post_code() The post_codes.h is replaced with console.h since console.h includes both the post_code definition and post_codes.h Change-Id: I21345260e86de30614c416e2f509bd77b9e00cb7 Signed-off-by: Sindhoor Tilak <sindhoor@sin9yt.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43596 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2020-07-26src: Update bare access to BOOL CONFIG_ vals to CONFIG()Martin Roth
BOOL type Kconfig values should be used through the CONFIG() macro. These instances were not, so update them. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie4706d82c12c487607bbf5ad8059922e0e586858 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43825 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Change BOOL CONFIG_ to CONFIG() in comments & stringsMartin Roth
The Kconfig lint tool checks for cases of the code using BOOL type Kconfig options directly instead of with CONFIG() and will print out warnings about it. It gets confused by these references in comments and strings. To fix it so that it can find the real issues, just update these as we would with real issues. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: I5c37f0ee103721c97483d07a368c0b813e3f25c0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43824 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove whitespace between 'sizeof' and '('Elyes HAOUAS
Change-Id: Iaf22dc1986427e8aa4521b0e9b40fafa5a29dbbd Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43720 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26{sb,soc}/intel/**/*.c: Use macros for PCI COMMAND bitsAngel Pons
We have definitions for the bits in the PCI COMMAND register. Use them. Also add spaces around bitwise operators, to comply with the code style. Change-Id: Icc9c06597b340fc63fa583dd935e42e61ad9fbe5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43839 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2020-07-26util: Remove extra newlines in log messagesRob Barnes
Print adds a newline implicitly. Simply remove the extra newlines. BUG=None TEST=Build zork, observe build log Change-Id: Idb150c12c90719ba1465e7e7fe45c26d456e2a1c Signed-off-by: Rob Barnes <robbarnes@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43786 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26arch/x86/smbios: Fix type4 for EDK2Patrick Rudolph
Mark the CPU as enabled and the socket as populated. EDK2 tests these flags before further reading this structure. Change-Id: Ic545bb47c502cb9d2352ba6d43eaed8c97229c02 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43703 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26smbios: Add Type19Patrick Rudolph
Implement type 19 by accumulating the DRAM dimm size found in cbmem's CBMEM_ID_MEMINFO structure. This seems common on x86 where the address space always starts at 0. At least EDK2 uses this table in the UI and shows 0 MB DRAM if not present. Change-Id: Idee8b8cd0b155e14d62d4c12893ff01878ef3f1c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Christian Walter <christian.walter@9elements.com>
2020-07-26autoport: Don't initialize already initialized fields in acpi_tablesPeter Lemenkov
Don't initialize fields with zeroes since gnvs structs were zeroed out in southbridge already. Also add some comments. See also these commits: * Commit a76cf28 with Change-Id I2ccf4699ba3ed3f5b9402c0340153d4a5bf82682 ("mb/lenovo/*/acpi_tables: Don't initialize already initialized fields"). * Commit 0c52638 with Change-Id I71f092ed7582b4931122d72f41d0b42a7569b96e ("mb/lenovo: Remove thermal.h header"). Change-Id: I1a0042bc93a2b30babcb896b3df23faf37998f3c Signed-off-by: Peter Lemenkov <lemenkov@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/40479 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/emulation/qemu-i440fx/northbridge.c: Use SMBIOS macrosElyes HAOUAS
Change-Id: I0297c8c4008d9e448793c38a3758dced9ede0d7e Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43587 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26arch/x86/smbios.c: Use macro for 'type_detail'Elyes HAOUAS
Change-Id: I95c40acb2fb390c50c8d1af9dd44999f9d57c2d5 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43589 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26nb/intel/haswell: Use macro for dimm->bus_widthElyes HAOUAS
Change-Id: Ice91a20470c107f7db0ac83301488ae5afed5a8b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43584 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26util/lint: Add lint and checkpatch coverage for tests/ dirJan Dabros
Signed-off-by: Jan Dabros <jsd@semihalf.com> Change-Id: I8018b75844e630c9ed46c8bc48f2aa1634bf3369 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43511 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-26mb/intel/tglrvp: Update MAINBOARD_PART_NUMBERAnil Kumar
- Update MAINBOARD_PART_NUMBER for TGL variants - MAINBOARD_PART_NUMBER is reported as FRID on acpi - This is required for cros_config to differentiate across TGL variants. - Mosys uses cros_config to identify TGL variants using data read from FRID Bug=none Test=build and boot coreboot on TGLRVP UP3 hardware Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I11d4ab2a5b6ade6c50988a9fec4d9866fe79d7b5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43620 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jack Rosenthal <jrosenth@chromium.org> Reviewed-by: Wonkyu Kim <wonkyu.kim@intel.com> Reviewed-by: Srinidhi N Kaushik <srinidhi.n.kaushik@intel.com>
2020-07-26mb/asus/p2b: Enable hardware monitor access via I/O on ISA busKeith Hui
Set up a 8-byte I/O range at 0x290-0x297 as PIIX4's generic device 9, which activates a chip select when this range is accessed. On the P2B family it connects to the W83781D hardware monitor, allowing access to it over the ISA bus, just like vendor firmware. Apparently this does not work on p3b-f, but no ill effects observed either. TEST=On p2b-ls lm-sensors can detect chip and get readings over ISA. Change-Id: Iaed1df7230359e94c580c305f4769c8bb4f5fce0 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41561 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26sb/intel/i82371eb: Add #defines for DEVRESx registersKeith Hui
These will be put to use in a follow-up. Change-Id: Id13dde5ce2239064b9b18de7ca516525158ae268 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41638 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26sb/intel/i82371eb: Clean up PM register #definesKeith Hui
Remove EIO define. It is unused and means something else, elsewhere in the tree. Move PMIOSE bit definition next to PMREGMISC, where it actually belongs. Correct a number of bit defines with glaring errors. Clarify in comments which PM register defines are in PCI config space are which are in I/O space. Change-Id: Ic7f2267d013403c0a519c2ee1786bd3c7f5a9708 Signed-off-by: Keith Hui <buurin@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/41637 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove unneeded space in license headerElyes HAOUAS
Change-Id: Iac0f0c3d102a9a900ac168f8be907349d9a3dd42 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43565 Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Maxim Polyakov <max.senia.poliak@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/google/dedede/var/drawcia: Add G2Touch touchscreen supportWisley Chen
BUG=b:155002684 TEST=build drawcia, and check touchscreen can work Change-Id: I29a891e07bb3c1d8ebe17666c18bfcf3bc1c361d Signed-off-by: Wisley Chen <wisley.chen@quantatw.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43551 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Justin TerAvest <teravest@chromium.org> Reviewed-by: Paul Fagerburg <pfagerburg@chromium.org>
2020-07-26util/amdfwtool: Add support for EFS SPI values for F17h and F15hMatt Papageorge
The Embedded Firmware Structure contains various SPI parameters for the PSP to program. This change adds support to amdfwtool for populating these values as well specifying SOC Family and Model. BUG=b:158755102 TEST=Read EFS values at appropriate offsets using a hex editor. Boot test on Tremblye and Morphius. Change-Id: I87c4d44183ca65a5570de5e0c7f9b44aa6dd82f9 Signed-off-by: Matt Papageorge <matt.papageorge@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42566 Reviewed-by: Furquan Shaikh <furquan@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26drivers/usb: Avoid NULL pointer dereferenceJohn Zhao
Coverity detects dereferencing pointers that might be "NULL" when calling acpigen_write_scope and acpigen_write_device. Add sanity check for both of scope and name to prevent NULL pointer dereference. Found-by: Coverity CID 1430454 TEST=Built and boot up to kernel on Volteer. Signed-off-by: John Zhao <john.zhao@intel.com> Change-Id: I8ece3831bbd2641ceafbd71b9dc3db7e04a8eae4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43449 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26soc/amd/common: Refactor and consolidate code for spi baseMartin Roth
Previously, the spi base address code was using a number of different functions in a way that didn't work for use on the PSP. This patch consolidates all of that to a single saved value that gets the LPC SPI base address by default on X86, and allows the PSP to set it to a different value. BUG=b:159811539 TEST=Build with following patch to set the SPI speed in psp_verstage. Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: I50d9de269bcb88fbf510056a6216e22a050cae6b Reviewed-on: https://review.coreboot.org/c/coreboot/+/43307 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Furquan Shaikh <furquan@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26ec/google/chromeec: Fix loop off-by-one error in DPTF _OSCTim Wawrzynczak
The while loop in \_SB.DPTF._OSC accidentally used <= instead of <, so there was an error indexing into IDSP. BUG=b:162043345 TEST=verify disassembled ASL, as well as no BIOS bug mentioned in /var/log/messages Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I08c4152c59cc9eb13386c825aab983681cfa88ed Reviewed-on: https://review.coreboot.org/c/coreboot/+/43827 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2020-07-26soc/amd/picasso: Update postcode valueMartin Roth
I accidentally had the same value for two different postcode entries. Fix that. BUG=None TEST=Watch postcodes in psp_verstage Signed-off-by: Martin Roth <martinroth@chromium.org> Change-Id: Id0bf18efc7e79278a21683c11a1084d2a7d97e6a Reviewed-on: https://review.coreboot.org/c/coreboot/+/43774 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26Kconfig: Remove unnecessary choice namesMartin Roth
The only reason to use a named choice statement is if you plan on having the choice statement in multiple places. Since none of these are used in multiple places, we can get rid of the names. Signed-off-by: Martin Roth <martin@coreboot.org> Change-Id: Ie5f84e9dc38050234976bd193ac5fbf649e564f4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26drivers/intel/dptf: Add missing Scope operator for _FIFTim Wawrzynczak
Missed one other scope operator in the DPTF cleanup. This one is for the fan device, and without this fix, the kernel isn't able to properly control the fan (it gets confused about whether it's ACPI 4+ compatible or not). BUG=b:149722146 TEST=verify /sys/class/thermal/cooling_zone0/max_state returns > 1, and /sys/class/thermal/cooling_zone0/cur_state is writable, and writing the value of `max_state` causes the fan to spin faster. Signed-off-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Change-Id: I7bd83967ace761ddd17eaeae9c25abb0b2cbe413 Reviewed-on: https://review.coreboot.org/c/coreboot/+/43840 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Furquan Shaikh <furquan@google.com>
2020-07-26mb/asus/p2b: Drop select SMPKyösti Mälkki
Variants that select BASE_ASUS_P2B_D will also get MAX_CPUS==2 below, so this was redundant. Change-Id: I9048a4821f19d90e1489b09e294d2551941abf10 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43809 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26smp/spinlock: Do not define barrier() globallyKyösti Mälkki
It's not stricly related to spinlocks. If defined, a better location should be found and the name collisions with other barrier() defined in nb/intel solved. Change-Id: Iae187b5bcc249c2a4bc7bee80d37e34c13d9e63d Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43810 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26arch/x86: Move cpu_relax()Kyösti Mälkki
It's not related to spinlocks and the actual implementation was also guarded by CONFIG(SMP). With a single call-site in x86-specific code, empty stubs for other arch are currently not necessary. Also drop an unused included on a nearby line. Change-Id: I00439e9c1d10c943ab5e404f5d687d316768fa16 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43808 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26cpu,soc/intel: Drop select SMPKyösti Mälkki
Implicitly selected with MAX_CPUS != 1. Change-Id: I4ac3e30e9f96cd52244b4bae73bafce0564d41e0 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42091 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src: Remove unused 'include <cbmem.h>'Elyes HAOUAS
Change-Id: Ib41341b42904dc3050a97b70966dde7e46057d6b Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43362 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26src/include: Remove unused 'include <stdint.h>'Elyes HAOUAS
Change-Id: I407474eac9f44f04036af7182714db7fdc4035f1 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43369 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2020-07-26mb/x/acpi_tables: Do minor cleanup on includesKyösti Mälkki
Change-Id: I7a6ddf95d085490d52e00ade7bac23e8c8849427 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/42865 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26nb/intel/sandybridge: Add missing includesElyes HAOUAS
Change-Id: I9d54d0923a595734a84256ddcafb9dae17615cb0 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43348 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26src: Remove extra lines in license headerElyes HAOUAS
Change-Id: I7378aa7d6156ece3ab3959707a69f45886f86d21 Signed-off-by: Elyes HAOUAS <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43593 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/emulation/qemu-aarch64: Fix up license headerAngel Pons
Change-Id: I9730680a8359407a2a03dbb7243a6547420e1f39 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43856 Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26*/mb/google/volteer/**/gpio.h: Fix up license headerAngel Pons
There's a `GPL-2.0-or-later` version of this file in volteer2, so use it in place of these weirdly-licensed files. Change-Id: Icde2f6539d9c726d6967350f74e7bc015e01e7b5 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: HAOUAS Elyes <ehaouas@noos.fr> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2020-07-26skylake boards: Factor out copy-pasted PIRQ routesAngel Pons
Put them in common code just in case something depends on the values. Change-Id: Ief526efcbd5ba5546572da1bc6bb6d86729f4e54 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43851 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26mb/intel/saddlebrook/devicetree.cb: Use PCH_IRQ* macrosAngel Pons
Tested with BUILD_TIMELESS=1, its coreboot.rom does not change. Change-Id: I6375f97bc2a30beba5882792328f26e0675621cc Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43867 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2020-07-26device/device.h: Add `is_dev_enabled` functionAngel Pons
There are many places where we do this. Put it inside an inline function for convenience reasons. Change-Id: I5515a52458b6c78c1a723cb08e6471eb9bac9cd6 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/43871 Reviewed-by: Felix Singer <felixsinger@posteo.net> Reviewed-by: Michael Niewöhner Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-27 08:39:52 +0000