Age | Commit message (Collapse) | Author |
|
The Max size of L2 table is 0x400. If we set it to other value, the
the A/B recovery image can not boot on Cezanne/Majolica platform.
The affected boards are Birman, Chausie, Skyrim, Mayan. Other boards
are binary identical. Tested on Skyrim and image can boot.
Change-Id: I2c0af6579dbe2a3a61e1fe9c79d69491fd45a5bb
Signed-off-by: Zheng Bao <fishbaozi@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84194
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Move the `BUILDING_WITH_DEBUG_FSP` Kconfig option from SoC-specific
files to the FSP2_0 driver Kconfig to avoid duplication. Also slightly
improves the option's prompt and help text.
TEST=Built and booted google/rex successfully.
Change-Id: I5c3dce59c396f6c1665a3ed1b8c1bb5df0f5a8d4
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84220
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
This patch adds a new Kconfig option `FSP_PUBLISH_MBP_HOB` to
control the creation of the ME_BIOS_PAYLOAD_HOB (MBP HOB) by FSP.
Disabling this option can improve boot time on platforms that
do not utilize the MBP HOB, such as ChromeOS devices.
The option is disabled by default on ChromeOS and enabled
by default on other platforms.
On ADL-P based platforms, this option is forced to be enabled
as ADL-P FSP relies on MBP HOB for ChipsetInit version for
ChipsetInit sync.
Removed SoC specific implementation of `FSP_PUBLISH_MBP_HOB` config
from MTL and TGL config file.
TEST=Tested on ADL-P and ADL-N platforms. Verified that MBP HOB is
created when `FSP_PUBLISH_MBP_HOB` is enabled and not created when
it is disabled.
Also verified that the system boots successfully in both cases.
Change-Id: I21da00259c0b9bcca6f545291a6259e9cce8d900
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84217
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Signing is performed with test keys by default, set
CONFIG_SIGNING_KEYS_DIR to a non-empty value to use other keys.
Depending on the version of the Talos II firmware this alone might not
allow booting because coreboot replaces only part of the stock firmware
and its newer versions enable secure boot by default (not to be confused
with SecureBoot in EFI). The signing performed in this commit is still
a prerequisite and might as well be done on its own. Fixing operation
with newer stock firmware will be done in a follow-up change.
Change-Id: Id88baef5ecb1f8ffd74a7f464bbbaaaea0ca643d
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67065
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
Tested using `edk2` from
`github.com/starlabsltd/edk2/tree/uefipayload_vs`:
* Windows 11
* Ubuntu 22.04
* Manjaro 22
No known issues.
https://starlabs.systems/pages/byte-specification
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Change-Id: Idff2d883a8c29f0fee9d633708aac92061a45132
Reviewed-on: https://review.coreboot.org/c/coreboot/+/80705
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
Add specific virtual wire mapping structure for:
- First pad group does not starts with bit position 0.
- vw_index and position are not continuous in between groups within a
community.
BUG=
TEST=boot to OS and use iotools to read the registers that use 16-bit
port ID such as IOM AUX Bias Ctrl register to verify the 16-bit group
ID field.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I986d4f4fe59b110e5075cab8742dfe8b336d034b
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83997
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
According to the Intel OPS spec, the DC power from display is
12~19V@8A max. It can't set PsysPmax by unknown voltage, so get
voltage by ec command "ectool adcread 4" then calculate PsysPmax value.
The OPS display can supply 90W power, configure psys_pl2 to limit
the system power to 90W.
BUG=b:329037849
BRANCH=firmware-brya-14505.B
TEST= USE="fw_debug" LOCALES="en" emerge-brask chromeos-bmpblk
intel-rplfsp intel-adlfsp coreboot chromeos-bootimage
Check adcread value by ectool adcread 4. If get 19540, PsysPmax
should be 19540 * 8000 ~= 156 W.
Check FSP debug log have the following message.
PsysPmax = 156W
Change-Id: Ic6e9c6ce9f3179c7d63c1169695fbc23188456dd
Signed-off-by: Shon <shon.wang@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83593
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This patch skips event logging for current boot information at ramstage
if CSE sync is scheduled at payload. Given that CSE sync could initiate
a system reset, resulting in redundant boot information logs, the
payload should handle the logging of boot information following CSE
sync.
BUG=b:360082747
TEST=Verified elog boot info is not logged at ramstage
Change-Id: Ia29ec350facc6850c04bb988027ecb146e648a50
Signed-off-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84120
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add support to configure GPIOs to pull for external interrupts (EINT).
BUG=b:334723688
TEST=Talk with Ti50 TPM using IRQ flow.
Change-Id: Ibeb2dafcd9909b4afbfa81728700718f01d3818f
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84026
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add control for the 1.2V enable pin in VCM to comply the mipi camera
power sequence.
2.8V enable --> 1.2V enable --> reset
BUG=b:362386165
TEST=Run ITS test
Change-Id: I495b2e266ee3d24ed3334bb9c173b3993d095e8e
Signed-off-by: Wisley Chen <wisley.chen@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84211
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
$ build/cbfstool build/coreboot.rom print
FMAP REGION: COREBOOT
Name Offset Type Size Comp
cbfs_master_header 0x0 cbfs header 32 none
fallback/romstage 0x80 stage 18495 LZ4 (30096 decompressed)
fallback/ramstage 0x4940 stage 24288 LZMA (61240 decompressed)
config 0xa880 raw 1324 LZMA (3308 decompressed)
revision 0xae00 raw 726 none
build_info 0xb100 raw 122 none
(empty) 0xb1c0 null 347108 none
header_pointer 0x5fdc0 cbfs header 4 none
Change-Id: I8541aa6f1429ed6143830ed11c47c150183ddf0d
Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com>
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/67064
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
|
|
Based on schematics NB7228A_LOTSO_INTEL_MB_PROTO_20240521A_BOM.pdf update devicetree settings.
BUG=b:333494257
TEST=emerge-brox coreboot chromeos-bootimage and boot on
Change-Id: Id8f30597ef9bceb9bdd4a3267266f1d189aa6fd8
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84198
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Power consumption according to RTS5227 datasheet section 6.4, L0s is not supported, so set it to ASPM_L1.
lspci -vvvv -s 01:00 to verify LnkCtl: ASPM L1 Enabled.
BUG=b:359409425
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: I87bb0d195566d273951dee6eeb54c9b388dd7607
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84177
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Update PL1 Min value from 6W to 15W based on the brox thermal cooling
capacity and hardware design.
BUG=None
BRANCH=None
TEST=Build and boot on brox board
Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com>
Change-Id: I266a78806e065bf7af0d5fcad9b22ab63aa892e2
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83661
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There are one too many acpigen_pop_len calls in the code
to generate the ROTM; remove one to fix an EMERG warning:
[EMERG] ASSERTION_ERROR: file `src/acpi/acpigen.c`, line 38
The extra acpigen_pop_len() call was added commit
45d2c3d5436e ("i2c/drivers/generic: Return ROTM in a package").
Change-Id: I913022144813f7f65eac1bcb7c97656f2c513c0b
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84197
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
iasl refuses to perform an arithmetic computation in a QWordMemory
parameter and fails with the following error.
dsdt.asl 2149: 0x4010800000, ((0x4010800000 + 0x10000) - 1), 0x0,
Error 6051 - ^ Address Min is greater than Address Max
This commit replaces the arithmetic with the result to define
IOM_BASE_ADDR_MAX.
BUG=b:348678529
TEST=Build for google/fatcat mainboard.
Change-Id: Ia5cf899b049cb8eb27b4ea30c7f3ce7a14884f16
Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84216
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When world-facing camera is absent, coreboot need to enable
GPP_R6(DMIC_WCAM_CLK) and GPP_R7(DMIC_WCAM_DATA) for 3rd dmic support
BUG=b:333973512
TEST=Boot google/riven to OS and verify 3rd dmic working properly.
Change-Id: I6c8780ce37b5d3987f5cdf6e6e6d0b4896b33230
Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84141
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
Change-Id: I62d0e324329fdde599e67efb23f813e3b3c650ef
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84199
Reviewed-by: Nicholas Chin <nic.c3.14@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
With `probe unprovisioned` fw_config rule, there is no need to define an
explicit STORAGE_UNKNOWN option. Hence remove it.
BUG=None
TEST=Build Jubilant FW image.
Change-Id: I4f6ace4b39a1ee0b63486d3872b20c8da719ae4a
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84095
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Use CONFIG_SOC_INTEL_COMMON_BLOCK_ACPI_HAVE_GPE1 to enable GPE1 block.
This will include GPE1 blocks to FADT with their info.
BUG=362310295
TEST=boot to OS and check that FADT table include GPE1.
FADT should have:
GPE1 Block Address : 00001810
GPE1 Block Length : 18
GPE1 Base Offset : 80
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: Ia6928c35b86f4a2243d58597b17b2a3a5f54271e
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84103
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Introduces the BIT_FLAG_32(x) macro to create a 32-bit mask with the
designated bit set. This ensures compatibility with the 32-bit
'GEN_PMCON_A' register on 64-bit systems, where 1ul is 64 bits wide and
could potentially cause an overflow when shifted beyond 31 bits.
Change-Id: I70be1ccba59d25af2ba85a2014232072abf2f87d
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84142
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
This patch refactors ITSS related SoC specific macros by consolidating
them into a common itss.h file. This improves code maintainability and
reduces redundancy as each SoC previously defined the same macros.
Specific changes include:
- Move SoC specific ITSS macros into intelblocks/itss.h.
- SoC code now includes intelblocks/itss.h instead of the SoC-local
soc/itss.h.
- Drop soc/itss.h from static ASL files.
- Delete soc/itss.h from all SoC locals except Apollo Lake and
Sky Lake.
TEST=Able to build and boot google/hatch, google/xol and google/karis.
Change-Id: I6461dc93b0d21bec5429075bc26435bae3754d74
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84183
Reviewed-by: Jayvik Desai <jayvik@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Kapil Porwal <kapilporwal@google.com>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
|
|
Tune I2C2 timing:
Set falling time to 250ns from 400ns to meet spec: "THIGH>0.6us"
BUG=b:362685374
TEST= Build jubilant firmware
Measure the i2c signal on jubilant to meet spec:
I2C2 THIGH from 0.494 us to 0.76 us
Change-Id: I42a60edc0b361bfabacf5376ef89f436efedb356
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84143
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
Details:
- Add (POWER_CTL) – Offset 0x1fc required bits.
Change-Id: Ief7f514c5837cb2f7c3158b67c4f6fed86796e71
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84178
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Details:
- Add (TM1_TM2_EMTTM_ENABLE_BIT) - Offset 0x1a0 required bits
- Add (IA32_PACKAGE_THERM_INTERRUPT) – Offset 0x1b2 required bits
Change-Id: I7be9a43a51bc52300e66cbf736c3e3275714b13b
Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84174
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
This patch removes the GPIO_IRQ_START and GPIO_IRQ_END definitions
from itss.h for Alder Lake, Cannon Lake, Elkhart Lake, Jasper Lake,
Meteor Lake and Tiger Lake. These definitions are no longer needed.
TEST=Able to build and boot google/xol and google/karis.
Change-Id: I60a08ba2c894fd1c1af6c6aef3ddc4a33ec63e76
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84182
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This change removes the unused pch_handle_sideband() function from the
Meteor Lake platform code.
TEST=Able to build and boot google/rex.
Change-Id: Idd14748aa1d917d6e88d738541a737c04a2c6a15
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84189
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com>
|
|
Change-Id: I41a877ed7f5f3d02904dc939b32996a7f6d45373
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84165
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I80ad02ca016ad2c8d0bfeb33e8309002dfe723c0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84164
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: If1cb63847ffbfed9bb09679931cfb23289bf59f0
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84163
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
|
|
Change-Id: I569b9a69add341bcefe6bd5356b01a95a4e97286
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84154
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
|
|
Change-Id: I5cd04972936c14d92295915fad65c7a45a8108d9
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84152
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jakub Czapiga <czapiga@google.com>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
PCI vendor/device IDs are 16 bit.
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Change-Id: I87804a63f04b7461d348a245531542776575eb7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84186
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Generate RAM IDs of lp5 memory:
1)Hyinx 4GB*4 H58G56BK8BX068
2)SAMSUNG 4GB*4 K3KL8L80CM-MGCT
BUG=None
TEST=Run part_id_gen tool and check the generated files.
Change-Id: I6b6e351ceaacfd65eae7b1db14c195b34359689a
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84193
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
|
|
Modify the FP IRQ pin to GPP_D13 from GPP_F15 from HW change on EVT.
The design change to follow the brox's GPE0 routing, and the
FP wake source can be routed.
BUG=b:363166664
TEST= Build jubilant firmware
Change-Id: Ic4a7ca07eab0dab234ab025cf77bbb8093b6b9d1
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84124
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add initial support for the LattePanda Mu board, which features:
- Intel Alder Lake-N N100 processor
- Samsung K3LK7K70BM-BGCP, 8GB LPDDR5 memory
- Samsung KLMCG2UCTA-B041, 64GB eMMC storage
- SO-DIMM 260-pin connector for function expansion
This commit includes:
- Basic board configuration
- Memory initialization
- Essential I/O setup
- Used UEFITool NE alpha 68 (Nov 4 2023) to extract data.vbt file
from original BIOS
- BIOS download link: https://github.com/LattePandaTeam/LattePanda-Mu
located at "./Softwares/BIOS/DFLT/LP-BS-S70NC1R200-SR-A.bin.zip"
Test Environment:
- Carrier Board: Lite
- Payload: mrchromebox/edk2
- EDK2 Version: uefipayload_202309
Test result
Passed:
- Windows 11 boot from eMMC
- Install Ubuntu 24.04 on NVMe SSD
- Ubuntu 24.04 boot from NVMe SSD
- USB 3.0/2.0 functionality
- Realtek RTL8111H-CG-RH Ethernet
- HDMI Display
- Audio over HDMI work in Ubuntu 24.04
Known Issues:
- S3 sleep mode non-functional
- Power-on after shutdown requires power removal
- SuperIO UART not detected in Windows 11
- Audio over HDMI not work in Windows 11
- Windows 11 BSOD occurs with NVMe SSD installed:
- Stop code: Machine Check Exception
- NVMe SSD not working on Windows 11, except when:
- KDNet Debugging enabled on NIC during boot
- SSD becomes functional in this scenario
Change-Id: I79696bdd837a221860b32f54629212c3346dca66
Signed-off-by: KunYi Chen <kunyi.chen@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83719
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
GCC LTO found this.
Change-Id: I2d5a9a86dbb91a5505891a30c6e9072b1b4dfc92
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84056
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
De-assert PERST# at romstage to reduce the waiting time in ramstage.
Before
```
[INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done,
de-assert PERST# now
[INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries)
```
After
```
[INFO ] wait_perst_done: PCIe early PERST# de-assertion is not done,
de-assert PERST# now
[DEBUG] wait_perst_asserted: 457568 us elapsed since assert PERST#
[DEBUG] wait_perst_done: 163413 us elapsed since de-assert PERST#
[INFO ] mtk_pcie_domain_enable: PCIe link up success (1 tries)
```
BUG=none
TEST=boot from NVMe
Change-Id: I3a73bd574ae8f9f4e624846ce8b901a7d2209e78
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84118
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Even we assert PRSET# early to save the delay between PERST# assertion
and de-assertion. MediaTek PCIe driver still takes 47ms waiting for PCIe
link up. (1ms delay for each try)
```
[INFO ] mtk_pcie_domain_enable: PCIe link up success (47 tries)
```
Refactor common/pcie.c and add mtk_pcie_deassert_perst for early PCIe
reset. So we can de-assert PERST# at early stage to improve the boot
time.
BUG=b:361728592
TEST=emerge-cherry coreboot
Change-Id: I008e95263bfaf0119353382c2d2ce5ce29c6a382
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84117
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
|
|
Add support for creating a DSM Method for Intel Bluetooth that
is outlined in Intel's connectivity integrated guide (which has
no document number).
It supports two GUIDs:
Set Tile Activaction (2d19d3e1-5708-4696-bd5b-2c3dbae2d6a9)
BIT(0) Indicates whether the device supports other functions
BIT(1) Set Tile Activation
Check/Set Reset Delay (aa10f4e0-81ac-4233-abf6-3b2ac50e28d9)
BIT(0) Indicates whether the device supports other functions
BIT(1) Set Bluetooth reset timing
Change-Id: Icc18f867604876b27ced2ee4356e47b3aa6b4f74
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84133
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
On the non-vboot boot path, eSPI is configured as part of
fch_pre_init(), and we need to ensure that the mainboard sets the
eSPI GPIOs properly before the common SoC code performs eSPI init.
Use the mb_set_up_early_espi() function to set the eSPI GPIOs at
the correct time.
TEST=build/boot google/zork (morphius), verify keyboard functional.
Change-Id: I03efe6def37a018c3de410523be21bf008174e94
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84148
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that zork can boot without vboot, ensure that the GPIOs set in
verstage are programmed in bootblock on the non-vboot path.
The eSPI GPIOs will be set in a subsequent patch using
mb_set_up_early_espi() since setting them in
bootblock_mainboard_early_init() would be too late given when the
SoC eSPI init takes place.
TEST=build/boot google/zork (morphius) w/o vboot
Change-Id: I0bb49678b2d913c447d5bc761a6f0e00fca6334f
Signed-off-by: Matt DeVillier <matt.devillier@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84147
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
|
|
Add a new fw config field for wifi category as WIFI_6_8852, which is
PCIe based. Also, enable WIFI_6_8852 for existing PCIe based wifi port
as well as bluetooth port.
BUG=b:356434907
BRANCH=NONE
TEST=Verified Wifi6 module detection
Change-Id: Ib6ba641c23cce7f1253022c9bb78b986b323bcaa
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84138
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login
screen, it is because it inserts 12 blank frames if it receives the
unmute in VB-ID.
Always override the mute in VB-ID to avoid Tcon EC detected the
audiomute_flag change.
BUG=b:360243615
BRANCH=firmware-nissa-15217.B
TEST:Verfied on Teliks and cannot reproduce the issue
Change-Id: Iff488f6844c717ef24069c7176e7b8dfb07d8abc
Signed-off-by: Jianeng Ceng <cengjianeng@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84137
Reviewed-by: Eric Lai <ericllai@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Qinghong Zeng <zengqinghong@huaqin.corp-partner.google.com>
|
|
Change-Id: Ida4461de6275bdd314f5cba441d3ff631d570305
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84109
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
CAPID_A, BDSM and BGSM registers may not exist on specific platform,
this patch add `HAVE_CAPID_A_REGISTER` and `HAVE_BDSM_BGSM_REGISTER`
to select them.
Change-Id: I4d1197b8b1071aefc2ea1ed2f707d769aabab5e4
Signed-off-by: Yuchi Chen <yuchi.chen@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84108
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
|
|
Add EARLY_INIT_PCIE_RESET for early PERST# de-assertion.
BUG=b:361728592
TEST=emerge-cherry coreboot
Change-Id: I7ab85694e85a4c3f77fefc22efe16734c347a716
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84116
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
|
|
mtk_pcie_reset can be shared with MT8196. So move it to common/pcie.c.
BUG=b:361728592
TEST=emerge-cherry coreboot
Change-Id: Ib540cf9cc568206a1e78306624f4df7c5631c128
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84115
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Use clr/setbits32p to make code cleaner.
BUG=none
TEST=emerge-cherry coreboot
Change-Id: Id99d5aafdf4d687dbe3a0bef29b148537cf58dd8
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84114
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
|
|
Currently pcie.c is built into ramstage only, where DEVTREE_CONST is an
empty macro, so there's no problem with that. However, if we would like
to include that file in pre-ramstage, then DEVTREE_CONST would be
'const', leading to the following build error:
```
src/soc/mediatek/common/pcie.c:104:26: error: assignment discards
'const' qualifier from pointer target type [-Werror=discarded-qualifiers]
104 | root_dev = pcidev_path_on_root(devfn);
| ^
```
BUG=none
TEST=emerge-cherry coreboot
Change-Id: Ia7c95424019ec0dca50bbc6be7f81b6180d06d6e
Signed-off-by: Yidi Lin <yidilin@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84113
Reviewed-by: Jianjun Wang <jianjun.wang@mediatek.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Bluetooth driver in kernel requires reset-gpio in current resource
settings (_CRS) and device specific data (_DSD) ACPI objects. Hence
remove ACPI Power Resource for Bluetooth device so that the concerned
ACPI objects get populated.
BUG=b:362817900
TEST=Build Brox Firmware image and boot to OS. Ensure that the _CRS and
_DSP ACPI objects are filled in the SSDT with the required data.
Name (_CRS, ResourceTemplate () // _CRS: Current Resource Settings
{
GpioIo (Exclusive, PullDefault, 0x0000, 0x0000, IoRestrictionOutputOnly,
"\\_SB.PCI0.GPIO", 0x00, ResourceConsumer, ,
)
{ // Pin list
0x004D
}
})
Name (_DSD, Package (0x02) // _DSD: Device-Specific Data
{
ToUUID ("daffd814-6eba-4d8c-8a91-bc9bbf4aa301") /* Device Properties for _DSD */,
Package (0x01)
{
Package (0x02)
{
"reset-gpio",
Package (0x04)
{
\_SB.PCI0.XHCI.RHUB.HS10,
Zero,
Zero,
One
}
}
}
})
Change-Id: If6e679aa3f4181e7963ac53d0847b1512959b3a7
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84135
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
|
|
Update dptf settings from thermal design:
1) Remove fan control and active policy,
since fan is controlled by EC.
2) Modify TSRs to 0:DRAM, 1:SOC, 2:Charger
3) Update Pl2 min&max values
BUG=None
TEST= Build jubilant firmware
Generate and check ACPI SSDT.dsl
$ cat /sys/firmware/acpi/tables/SSDT > SSDT
$ iasl -d SSDT
Change-Id: I2d59eedea9fb25565709e118abc1a14b4c2a64e7
Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84123
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
Reviewed-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
|
|
Change-Id: I46021accacbb911d7a7ecfdbb52973a7da78f36e
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84125
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The cw-al-4l-v1.0 mainboard has two USB2 ports on a 2x5 pin header on
the mainboard and likely also routes one USB2 port to the m.2 E key slot
which is typically used for Bluetooth support when an E key m.2 WIFI +
Bluetooth card is installed.
This is untested, since I only have the cw-al-4l-v2.0 mainboard, but
from looking at the documentation of the version 1 and looking at how
things are done on the version 2 this should be correct.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I7059a3f2d9cde0086382a4484c09d5ef33dc906d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83910
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
- Add Kconfig: SOC_INTEL_COMMON_BLOCK_GPIO_16BIT_CPU_PORTID.
- Change cpu_port field to 16-bit width if the Kconfig is set.
BUG=none
TEST=boot to OS and use iotools to read the registers that use 16-bit
port ID such as IOM AUX Bias Ctrl register to verify the 16-bit group
ID field. The bit 15:8 of the returned port ID value should be 0xF2
instead of zero.
Signed-off-by: Cliff Huang <cliff.huang@intel.com>
Change-Id: I8c1a48d587bd41178b0c6bb0144fda93e292423d
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83981
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
1) Add all required changes for eSOL support.
2) Select MAINBOARD_USE_EARLY_LIBGFXINIT for Trulo.
The CSOT (MNC207QS1-1) panel is used for the devicetree.
BUG=b:362895813
TEST=On-screen text message seen during MRC training on Trulo SKU1.
MRC: no data in 'RW_MRC_CACHE'
bootmode is set to: 0
DP PHY mode status not complete
DP PHY mode status not complete
DP PHY mode status not complete
...
Informing user on-display of memory training
Change-Id: Ic34a8601b3084aa5f780d358fb0b15b7e820d375
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84128
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
|
|
Previously, `early_graphics_stop()` was skipped unconditionally if
`CONFIG(SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE)` was enabled. This led
to overlapping screens when CSE sync was not triggered in ramstage,
as both the eSOL message and the firmware splash screen would be
displayed.
This change refactors the condition for calling `early_graphics_stop()`
to ensure it is only skipped if a CSE firmware update is actually
required *and* `CONFIG(SOC_INTEL_CSE_LITE_SYNC_IN_RAMSTAGE)` is set.
This allows eSOL to display its message during CSE sync, but tears
down early graphics programming in other cases to prevent overlapping
screens.
Additionally, this change ensures that `early_graphics_stop()` is the
last function called by the romstage to guarantee proper cleanup.
BUG=b:362895813
TEST=Able to boot google/tivviks_ufs without overlapping screens.
Change-Id: Idc01bfc8963d65fcb0441300e7c9267eaaefefb9
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84144
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Update verb table provided by Realtek on 20240710.
Restults: SNR > 90 (spec>=90).
BUG=b:349996984
TEST=emerge-brox sys-boot/coreboot sys-boot/chromeos-bootimage
Change-Id: Ic4f03d09010efa7e32713b2697d5832255f64317
Signed-off-by: Jian Tong <tongjian@huaqin.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83920
Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
|
|
src/acpi/sata.c: In function 'generate_sata_ssdt_ports':
src/acpi/sata.c:27:29: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-initialization]
27 | char port_name[4] = "PR00";
| ^~~~~~
Change-Id: Ie80c2329c4a2698bd9e72ba1b36c1c05e37b214b
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84166
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
Reviewed-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
|
|
Change-Id: Id0ab5e641684e03da555a127808c0def5a53cbe6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84159
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: Icc01852dc5bd04cfa151e8fa7c5bcc160ed978c6
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84156
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
The file is updated significantly because it wasn't regenerated for a
while.
Change-Id: I2b18cb614f5fc38f2a417f7595475fdedfb6d625
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83423
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Martin L Roth <gaumless@gmail.com>
|
|
How it approximately works:
(During a normal system run):
1. OS puts a capsule into RAM and calls UpdateCapsule() function of EFI
runtime
2. If applying the update requires a reboot, EFI implementation creates
a new CapsuleUpdateData* EFI variable pointing at the beginning of
capsules description (not data, but description of the data) and does
a warm reboot leaving capsule data and its description in RAM to be
picked by firmware on the next boot process
(After DEV_INIT:)
3. Capsules are discovered by checking for CapsuleUpdateData* variables
4. Capsule description in memory and capsule data is validated for
sanity
5. Capsule data is coalesced into a continuous piece of memory
(On BS_WRITE_TABLES via dasharo_add_capsules_to_bootmem() hook:)
6. Buffer with coalesced capsules is marked as reserved
(On BS_WRITE_TABLES via lb_uefi_capsules() hook:)
7. coreboot table entry is added for each of the discovered capsules
(In UEFI payload:)
8. CapsuleUpdateData* get removed
9. coreboot table is checked for any update capsules which are then
applied
Change-Id: I162d678ae5c504906084b59c1a8d8c26dadb9433
Signed-off-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83422
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
|
|
By default, QEMU bails when trying to use bigger images mounted with
'-drive if=pflash', which is required to make use of writable flash
introduced in CB:82555. This changes both default size in Kconfig as
well as FMAP layouts.
Since QEMU 5.0.0 it is possible to change the limit of firmware size
with `max-fw-size` machine configuration option, up to 16 MiB, as bigger
sizes would overlap with IO APIC memory range. Default is still 8 MiB,
so it makes sense to have identical default in coreboot.
Error thrown by QEMU when trying to use too big ROM:
qemu-system-x86_64: combined size of system firmware exceeds 8388608 bytes
Change-Id: If36cb754a8e75e23bce49ff568dd88e5db279bb8
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82639
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Maciej Pijanowski <maciej.pijanowski@3mdeb.com>
Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
|
|
qemu-system-x86_64 uses AMD64 SMM save state format, despite emulating
Intel chipset. In addition, even though it implements SMI_STS register,
QEMU never sets any bits in it. As there is little emulated hardware
that can be generating SMI, assume that all SMIs come from APM. This
source is used e.g. to disable ACPI (which wasn't working until now on
QEMU) and SMMSTORE.
Tested by invoking SMMSTORE commands from the payload with SMM logging.
Change-Id: I2fc7b74bdc13be8d76bc536283ab5a14fffec45f
Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82558
Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
To support Widevine DRM, enable VBOOT_DEFINE_WIDEVINE_COUNTERS.
BUG=b:357976379
TEST=emerge-rauru coreboot
BRANCH=none
Change-Id: I3760c30b175338165f8e11b59c7cfa830070a19e
Signed-off-by: Yu-Ping Wu <yupingso@chromium.org>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84121
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
GCC with LTO caught this.
Change-Id: I9f78b9973729bdedb40bd63b8989e94c9c498814
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84055
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
The fspm_rc_heap is already accounted for inside .car.data. Some linkers
like LLD do not like overlapping regions so remove this.
Change-Id: I058bd6790afc313e06f1888e5b783d97b7e93b1e
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84048
Reviewed-by: Shuo Liu <shuo.liu@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
LTO does not like that assert on a constant, so use the more appropriate
static assertion.
Change-Id: I52094ec825fcec56a9b9fb6b9abc58644c2bf9cb
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84047
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
On xeon-sp this is a zero length array. With GCC LTO this triggers the
stringop-overread warning. To work around this change the signature of
the function from an array to a pointer.
Change-Id: Ieee6e9bddc4e738eb560dd0e69dc3087ac9f5da6
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84042
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
A DDR5 DIMM internally has two channels each of width 32 bit.
But the total physical channel width is 64 bit.
This is the same fix as be5dc3daa "soc/intel/alderlake: Configure DDR5
Physical channel width to 64"
Building with GCC LTO cought this buffer overflow when assigning SPD
addresses to a buffer.
Change-Id: Ief6018e4dcce6b26804ff864cdfe116f0f90d545
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84085
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
GCC LTO incorrectly warns about this it seems.
This also exits gracefully from stage-cache code if no smm region is
found.
Change-Id: Ib1851295646258e97c489dc7402b9df3fcf092c1
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84040
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
There is no struct device *dev equivalent of this function. Clang LTO
warns about mismatching types.
Change-Id: I22c8c9b9f350c53469a5d386db211969c8a41cf0
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84084
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The driver sets ACPI names for PCIe root ports and its subordinate
devices, and fill SSDT for them accordingly. SPR PCIe root port
devices are initially supported.
TEST=Build and boot on intel/archercity CRB
Change-Id: I81bd5d5a2e62301543a332162a5a789e0793e18e
Signed-off-by: Shuo Liu <shuo.liu@intel.com>
Signed-off-by: Jincheng Li <jincheng.li@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/81567
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
|
|
This updated microcode fixes the recent voltage issues on the Raptor
Lake S platform. Intel provided this specific microcode just as an
attachment [1]. Thus, we've uploaded it to our own blobs repository,
which is why the path is changed.
Microcode signature:
sig 0x000b0671, pf_mask 0x32, 2024-07-18, rev 0x0129
[1] https://github.com/intel/Intel-Linux-Processor-Microcode-Data-Files/issues/81
Change-Id: I6d01e38476b0d3dc5281ea1d85bac87043d122dd
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84132
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Updating from commit id a8db7df:
2023-07-24 16:05:01 +0000 - (mb/google: amd projects: Add signed verstage files)
to commit id 45f1b75:
2024-08-29 11:51:27 +0200 - (soc/intel/raptorlake: Add microcode for 06-b7-01)
This brings in 7 new commits:
45f1b75 soc/intel/raptorlake: Add microcode for 06-b7-01
a0fdf22 soc/mediatek/mt8186: Update DRAM binary from 0.1.0 to 0.1.1
c641a81 mb/erying/tgl: Add blobs necessary for platform bring-up
30e541a soc/mediatek/mt8192: Update dram.elf from 1.6.3 to 1.8.3
ba6e8a4 soc/intel: Remove Quark blobs
1f31acc soc/mediatek/mt8188: Update DRAM blob to 0.1.2
542c27d mb/starlabs/starbook: Consolidate version history
Change-Id: I7553ea2112cb336866bdff3c24c02f8a7fd15811
Signed-off-by: Felix Singer <felixsinger@posteo.net>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84129
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
The underlying IMD function already returns an integer which indicates
success or failure.
This removes the need to have initialized variables that need to be
checked for NULL later. In some cases this actually adds the appropriate
check for returned values.
Dying is appropriate if cbmem is not found as it is essential to the
bootflow.
Change-Id: Ib3e09a75380faf9f533601368993261f042422ef
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84039
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
Change-Id: I9cdda036f330486370e8c4120be5b6a0fd982e99
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84038
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
For LTO we want to link everything in one go.
Change-Id: If2c186eb87072e0b80c7e8998b2a0d9bdfddf740
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84037
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
When clang supports linking bare metal targets it defaults to LLD for
linking which linking those raw data structures used to generate CBFS
page tables does not fare well.
Change-Id: I66fb374a456ea752a97a41426c5a98e6747f3a92
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84057
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Nico Huber <nico.h@gmx.de>
|
|
We have to reset the USB hub as early as possible. Otherwise the USB3
hub may not be usable in the payload. This design has been introduced
since Cherry.
TEST=build pass.
BUG=b:317009620
Change-Id: Iea793b4b04bd009d0354e2331604bccf30466a23
Signed-off-by: Jarried Lin <jarried.lin@mediatek.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84024
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Add usb host function support.
TEST=read usb data successfully.
BUG=b:317009620
Signed-off-by: Mingjin Ge <mingjin.ge@mediatek.corp-partner.google.com>
Change-Id: I5d081ff3e7367b87fab5ebdcb148c9005ab583f5
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84022
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
|
|
Add USB host function support.
TEST=read usb data successfully.
BUG=b:317009620
Signed-off-by: Mingjin Ge <mingjin.ge@mediatek.corp-partner.google.com>
Change-Id: Ia4efcddac9bf5e04e688648a5c22384075a0b026
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84023
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Yu-Ping Wu <yupingso@google.com>
Reviewed-by: Yidi Lin <yidilin@google.com>
|
|
Updating from commit id 800c857:
2024-06-25 15:47:28 +0800 - (Update Fsp.fd)
to commit id 68328e2:
2024-08-05 16:00:43 +0800 - (NEX ADL-PS IPU 2024.4 (5045_03) FSP)
This brings in 10 new commits:
* NEX ADL-PS IPU 2024.4 (5045_03) FSP
* NEX ADL-P IPU 2024.4 (5045_03) FSP
* NEX ADL-S IPU 2024.4 (5045_03) FSP
* IoT MTL-UH_MTL-PS MR1 (4053_57) FSP
* NEX RPL-S MR4/RPL-S Refresh MR2 (5134_02) FSP
* NEX RPL-P MR2 (5134_02) FSP
* NEX ADL-P IPU 2024.3 (5045_02) FSP
* NEX MTL-UH & MTL-PS Post PV
* Iot ADL-N MR5 (5132_00)
* remove file
Change-Id: Ief40f675556bce662601d7d8db6660f72dc35961
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84111
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Updating from commit id 5278dfc:
2024-05-31 18:42:47 -0600 - (microcode-20240531 Release)
to commit id 2f56505:
2024-08-14 19:59:27 -0600 - (microcode-20240813 Release)
This brings in 1 new commits:
2f56505 microcode-20240813 Release
Change-Id: I5cf5d78bcda07f742a8282b84a1c8336e6a23594
Signed-off-by: Sean Rhodes <sean@starlabs.systems>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84110
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This avoids panic if the file contains an empty string or an incorrect
configuration:
goroutine 1 [running]:
main.decodeFile({0x7ffd63da92a0?, 0xc000014070?}, 0x8?)
/path/to/coreboot/util/hda-decoder/main.go:72 +0x2ef
main.main()
/path/to/coreboot/util/hda-decoder/main.go:158 +0x2a5
Change-Id: I9ae8544e52d82e8d8a82a88a85a2de7d2f295ec1
Signed-off-by: Maxim Polyakov <max.senia.poliak@gmail.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84101
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
|
|
According to schematics, add GPP_H4/H5 configuration for scaler I2C pins (PCH_I2C_SCALER_SDA/SDL).
BUG=b:358439747
TEST=emerge-constitution coreboot chromeos-bootimage. Build successfully and boot to verify I2C.
Change-Id: Id831f594d6a57ed10867ae5ba05ae98c90ac7d9b
Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84091
Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
According to RDC#646929 Power Map, there are two expected values of
VccInAuxImonIccImax and the value has to align with HW design.
But in current code, vccin_aux_imon_iccmax is hard code to 27000 (27A),
hence, provide a config for projects modification.
BUG=b:330117043
BRANCH=firmware-nissa-15217.B
TEST=Modify the register and add a printk to output a debug message
to observe whether the value is changing as expected.
Change-Id: I0651f0eb8a5c32b27c524e43bbf6f2a184b95657
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/82682
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Derek Huang <derekhuang@google.com>
|
|
This allows better debugging of the build by writing all the commands
run by the build into a file by replacing the standard shell.
Run with:
make SHELL="${PWD}/util/scripts/capture_commands.sh"
This will allow us to verify that the commands being run are posix
compliant.
Signed-off-by: Martin Roth <gaumless@gmail.com>
Change-Id: I67efc5096747c2e746642639f88273132e070e49
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83442
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
|
|
With `probe unprovisioned` fw_config rule, there is no need to define an
explicit STORAGE_UNKNOWN option. Hence remove it.
BUG=None
TEST=Build Lotso FW image.
Change-Id: Ia170a6e006cb51e95fbaf3efe1106ca907165eca
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84094
Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
Reviewed-by: Bob Moragues <moragues@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This feature is not required in Brox devices. Hence disable the
concerned device.
BUG=None
TEST=Build Brox firmware and boot to OS. Ensure that the concerned
device is disabled in the OS.
Change-Id: I355852c780c552e6f9b2c28508f53580f392c1b9
Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84093
Reviewed-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com>
Reviewed-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org>
|
|
`boot_dev` can be const, and we can use MEM_REGION_DEV_INIT() as all
the values are known at compile time.
Change-Id: Icd3757ba4b5e8bfbee9e9c9d18bf0ee71520a8ac
Signed-off-by: Nico Huber <nico.h@gmx.de>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84089
Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Panel CSOT MNB601LS1-3 will flicker once during enter Chrome login
screen, it is because it inserts 12 blank frames if it receives the
unmute in VB-ID.
Always override the mute in VB-ID to avoid Tcon EC detected the
audiomute_flag change.
BUG:b=357764688
BRANCH=firmware-nissa-15217.B
TEST:Verfied on Anraggar and cannot reproduce the issue
Change-Id: I711dfd0803440e4b04f02849fed529c3872e023d
Signed-off-by: Simon Yang <simon1.yang@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84098
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This allows clang to link x86 bare metal targets.
TESTED: Qemu i440fx and q35 boot to payload with both 32 and 64bit code
compiled with clang and LTO enabled with updated linker script.
Change-Id: I943215c8714e392e52ea35667f2bf21e517c4255
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84032
Reviewed-by: Nico Huber <nico.h@gmx.de>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
|
|
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that driver skips
initial probe during kernel boot and prevent privacy LED blink.
TEST=Build and boot nivviks. Monitor the camera LED blinking
during boot.
Change-Id: I979207d1b6d55f78dea20d3366ef4a833ee9c86d
Signed-off-by: Sowmya V <v.sowmya@intel.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84019
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Reviewed-by: Subrata Banik <subratabanik@google.com>
|
|
This patch eliminates the LPC_IOE_COMA_EN and LPC_IOE_COMB_EN IO enables
from the io_enables variable in the pch_early_iorange_init() function
because lpc_io_setup_comm_a_b() is intended to activate legacy COM
ports like COM-A (0x3F8 - 0x3FF) and COM_B (0x2F8 - 0x2FF).
These COM ports are being activated unconditionally, which is
undesirable for the Intel Alder Lake platform and causes traffic over
the IO bus.
As a result, this code is being removed and platforms that select
DRIVERS_UART_8250IO can activate legacy COM ports.
BUG=b:354066052
TEST=Able to boot google/redrix to the operating system and confirm
that there was no traffic over legacy COMs while being monitored
using the eSPI analyzer.
Change-Id: I7a6e38bd151f823d37c07ee89a800489122cc209
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84080
Reviewed-by: Eric Lai <ericllai@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
This patch removes the SOC_INTEL_GFX_MBUS_JOIN configuration option.
Support for fast modeset joining has been added to the mainline i915
kernel driver (https://patchwork.freedesktop.org/series/130480/),
making this coreboot-specific workaround unnecessary.
BUG=b:291885733
TEST=Successful build and boot of google/marasov with single and dual
displays, no redundant boot splash.
Change-Id: I53c08a0e7a40b24db7cc910c5b9adc2376a9bb17
Signed-off-by: Subrata Banik <subratabanik@google.com>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84030
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Paz Zcharya <pazz@google.com>
Reviewed-by: YH Lin <yueherngl@google.com>
Reviewed-by: Dinesh Gehlot <digehlot@google.com>
|
|
Change-Id: I4fc824bef1daf8c12eb671c58de9019ce5a23a2e
Signed-off-by: Elyes Haouas <ehaouas@noos.fr>
Reviewed-on: https://review.coreboot.org/c/coreboot/+/83575
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
Reviewed-by: Angel Pons <th3fanbus@gmail.com>
Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm>
Reviewed-by: Erik van den Bogaert <ebogaert@eltan.com>
|
|
Now that the PSP SMI handler for flash access is also implemented for
the PSP generation 1, the PSP SMI handler can be added to the
Stoneyridge code too. The actual PSP SMI handler code will only be added
to the build when SOC_AMD_COMMON_BLOCK_PSP_SMI is selected which isn't
the default case, so this patch doesn't change the current behavior
unless that option is also selected. This SMI handler mainly added for
completeness since the PSP firmware blobs released for Stoneyridge are
probably lacking the corresponding PSP-side code to send the PSP SMI to
the host. At least if I remember correctly the PSP bootloader release
for Stoneyridge has the ability to load the secure OS removed and since
the secure OS is the runtime component, some part of that is probably
what's sending those SMIs to the host. If there are some other PSP
bootloader builds that support loading the secure OS, this patch might
still be useful for those.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I78944e2de86bc1e8e277d22a7a8da517622f49a1
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84077
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
|
|
Now that we have the local psp_smi_flash.h header, move the
psp_smi_spi_* function prototypes there.
Signed-off-by: Felix Held <felix-coreboot@felixheld.de>
Change-Id: I12cbbabf6a960836fe0c5dc1424c08550cb66a7a
Reviewed-on: https://review.coreboot.org/c/coreboot/+/84068
Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
|