summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-11lib/prog_loaders.c: remove arch/stages.h includeAaron Durbin
There's no delcaration used. Remove the include. Change-Id: I6fa7de6362ca0e92f0d5a7d07f3a224b9f77f709 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13679 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11arch: remove stage_exit()Aaron Durbin
It's no longer used. Remove it. Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11timestamp: Bump CBMEM timestamp count, make full use of pre-RAM regionsJulius Werner
Since we're reaching the timestamp limit on certain platforms (both for the pre-RAM cache and the final CBMEM region), this patch increases the amount of space for both. In the pre-RAM case, it achieves this by always utilizing the full size of the TIMESTAMP() region allocated in memlayout.ld, rather than arbitrarily limiting it to some constant. BRANCH=None BUG=None TEST=Booted Oak and confirmed that I can once again see all pre-RAM timestamps after picking in the LZ4 patch series. Change-Id: Iabb075a48d8d1e3e1811afeaad5ab47e7846c972 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13651 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLEAndrey Petrov
Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11soc/apollolake: Add minimal GPIO driverAndrey Petrov
This adds the minimal functionality needed to configure SoC pads. Change-Id: I2e2268eee2b8c822b42a48a95604b0fab86c9833 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13676 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-02-11mainboard/intel: Add skeleton for Apollolake RVP board familyAlexandru Gagniuc
RVP1 board comes with DDR3 SODIMMs and discrete VRs. RVP2 board uses LPDDR3 and PMIC. Change-Id: I3e47c157c49ad55ff1ba824672ac2630a64a6037 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13298 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11soc/apollolake: Add initial cache-as-ram setup for bootblockAlexandru Gagniuc
This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11git modules: rename git submodules to avoid hierarchiesPatrick Georgi
Having a git module named "3rdparty" and another one in "3rdparty/chrome-ec" led to git failures when the latter was initialized before the former (because of git being stupid, but then it says so on the box, right?) Rename modules so there's no such hierarchy (3rdparty -> 3rdparty/blobs). While at it, also rename the culprit to match the path name (3rdparty/chrome-ec to 3rdparty/chromeec). git will resolve this on the next git submodule update invocation (eg. the next coreboot build). Change-Id: Ief79074d73abeefff36a47b2e58ac6b1c047e3a7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/13675 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-02-113rdparty/chromeec: fix build with paths containing "@"Patrick Georgi
Move submodule forward to a newer upstream master to fix the build on paths containing "@", as can happen on jenkins. Change-Id: Ie74012725c379909d5bf631f9cc9969106ca52b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13673 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-11cpu/x86/tsc: Compile delay_tsc.c for the bootblock as wellAlexandru Gagniuc
This is needed in a follow-on patch to enable udelay() handling on apollolake, which is a dependency for the console code. Change-Id: I7da6a060a91b83f3b32c5c5d269c102ce7ae3b8a Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13302 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11util/marvell: Add Marvell doimage utility and dependency in relevant MakefileRuilin Hao
- Add the doimage sources in util/marvell - Add dependency in root makefile - Add dependency in makefile for armada38x soc BUG=chrome-os-partner:47462 TEST=emerge-cyclone coreboot BRANCH=tot Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9 Original-Signed-off-by: Kefei Yao <kfyao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/318046 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13137 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-11arch/x86: Change how BOOTBLOCK_CUSTOM is selected by defaultAndrey Petrov
Currently x86s select BOOTBLOCK_CUSTOM by default. With this change BOOTBLOCK_CUSTOM is selected only if C bootblock isn't. Change-Id: I218f3b4044175b89697790c82c384b0f85a27ade Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13642 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Allow bootblock code to use CAR_GLOBAL variablesAndrey Petrov
Since cbmem is not initialized in bootblock, CAR_GLOBAL variables can only be accessed directly similar to verstage. Change-Id: Ifc705016290807c49dc8c49b581864cac2ad3f80 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Reserve space for stack in CAR layoutAndrey Petrov
Some platforms may want to use C code in bootblock so they need writable memory and CAR can be used for it. This change reserves memory in CAR that can be used by bootblock and other CAR stages. Change-Id: I8dec768cf8763dbe235f0ba1339079ebc49cbd9a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13640 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-10cpu/intel/microcode: allow microcode to be loaded in romstageAaron Durbin
The previous usage of the intel microcode support supported using the library under ROMCC and ramstage. Allow for microcode support to be used in normal C-based romstage as well by: 1. Only using walkcbfs when ROMCC is defined. 2. Only using spinlocks if !__PRE_RAM__ The header file now unconditionally exposes the declarations of the supporting functions. Change-Id: I903578bcb4422b4c050903c53b60372b64b79af1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13611 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10kconfig_lint: update kconfig lint shell scriptsMartin Roth
- Add lint-stable script with just error checking - Enable warnings in addition to errors in non-stable test. - Use git grep if the code is in a git repo now that exclusions are working. - Check for perl, and ask the user to install it if it isn't available. Change-Id: Ie60d21f4ef8a61d879f116eb2056eb805b0a55f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13542 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-10chromeos/Kconfig: Remove dependency on GBB_HAVE_BMPFVMartin Roth
This symbol is not defined. Change-Id: I2b0a3fca82d85962fc882f237b70702cab0400db Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/13647 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10intel/fsp1_0: Allow the MRC cache to live in a FMAP regionBen Gardner
The new option CONFIG_MRC_CACHE_FMAP will cause fastboot_cache.c to look in the FMAP for a region named "RW_MRC_CACHE" and prevents adding a CBFS file named "mrc.cache". Tested on a fsp_baytail-based board. Change-Id: I248f469c7e3447ac4ec7be32229fbb5584cfd2ed Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/13632 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: York Yang <york.yang@intel.com>
2016-02-10google/veyron_speedy: remove extraneous filePatrick Georgi
veyron_speedy was deduplicated as sub-board into google/veyron, so the addition of chromeos.fmd (identical btw) wasn't useful. Change-Id: Ic4eb6f5fefb0812cae1b9c0475e3a296d7fa65b6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10google/chromeos: backup -> back upPatrick Georgi
See discussion on https://review.coreboot.org/13600 and https://review.coreboot.org/13601 Change-Id: Ia8274b0b296d6b398f75c0d91a6fded4c5f57e10 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13643 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10gitconfig: Fix make gitconfig if USE_BLOBS is disabledPatrick Georgi
We tested for the presence of .git/modules/3rdparty, which always exists now because of .git/modules/3rdparty/chrome-ec. Test for .../hooks instead since that's the actual location for the later activities. Change-Id: Id5de9f850413c2bc3525faa6cc549641304c3d47 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/13650 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10buildgcc: enable multilib for gccPatrick Georgi
Make the gcc build system create multiple libgcc.a instances for different ABIs. Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13625 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10arch/arm64: Use correct SPSR.DAIF mask for BL31 and payloadJulius Werner
The PSTATE mask bits for Debug exceptions, external Aborts, Interrupts and Fast interrupts are usually best left unset: under normal circumstances none of those exceptions should occur in firmware, and if they do it's better to get a crash close to the code that caused it (rather than much later when the kernel first unmasks them). For this reason arm64_cpu_init unmasks them right after boot. However, the EL2 payload was still running with all mask bits set, which this patch fixes. BL31, on the other hand, explicitly wants to be entered with all masks set (see calling convention in docs/firmware-design.md), which we had previously not been doing. It doesn't seem to make a difference at the moment, but since it's explicitly specified we should probably comply. BRANCH=None BUG=None TEST=Booted Oak, confirmed with raw_read_daif() in payload that mask bits are now cleared. Change-Id: I04406da4c435ae7d44e2592c41f9807934bbc802 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ba55bc23fbde962d91c87dc0f982437572a69a8 Original-Change-Id: Ic5fbdd4e1cd7933c8b0c7c5fe72eac2022c9553c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325056 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13596 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10arch/arm64: mmu: Spot check TTB memory attributesJulius Werner
On ARM64, the memory type for accessing page table descriptors during address translation is governed by the Translation Control Register (TCR). When the MMU code accesses the same descriptors to change page mappings, it uses the standard memory type rules (defined by the page table descriptor for the page that contains that table, or 'device' if the MMU is off). Accessing the same memory with different memory types can lead to all kinds of fun and hard to debug effects. In particular, if the TCR says "cacheable" and the page tables say "uncacheable", page table walks will pull stale entries into the cache and later mmu_config_range() calls will write directly to memory, bypassing those cache lines. This means the translations will not get updated even after a TLB flush, and later cache flushes/evictions may write the stale entries back to memory. Since page table configuration is currently always done from SoC code, we can't generally ensure that the TTB is always mapped as cacheable. We can however save developers of future SoCs a lot of headaches and time by spot checking the attributes when the MMU gets enabled, as this patch does. BRANCH=None BUG=None TEST=Booted Oak. Manually tested get_pte() with a few addresses. Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323862 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13595 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10soc/intel/quark: Report CPU infoLee Leahy
Decode the CPU variants and display the CPU info. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Successful if Quark X1000 is displayed Change-Id: I7234a6d81a48cdd02708b80663147e2b09ba979e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13605 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-10soc/intel/quark: Call FSP SiliconInitLee Leahy
Optionally relocate FSP into DRAM and then call FSP SiliconInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_FSP_ENTRY_POINTS" * Add "select DISPLAY_HOBS" * Optionally add "select RELOCATE_FSP_INTO_DRAM" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * FSP entry points are displayed and * The message "FspSiliconInit returned 0x00000000" is displayed and * The HOBs are displayed correctly and * The message "ERROR - Missing one or more required FSP HOBs!" is not displayed Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13631 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10soc/intel/quark: MTRR supportLee Leahy
Add the SoC specific routines to access the MTRR registers. These registers exist in the host bridge and are not accessible via the rdmsr/wrmsr instructions. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_MTRRS" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The message "FSP TempRamInit successful" is displayed Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13530 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-10soc/fsp_baytrail: Add support for FSP MR 005Ben Gardner
Baytrail FSP MR 005 adds two new fields: AutoSelfRefreshEnable APTaskTimeoutCnt Add the device tree definitions. Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12973 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-02-10soc/intel/quark: FSP MemoryInit SupportLee Leahy
Add a dummy fill_power_state routine so that execution is able to reach FSP MemoryInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_HOBS" * Add "select DISPLAY_UPD_DATA" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * MemoryInit returns 0 (success) and * The the message "ERROR - Coreboot's requirements not met by FSP binary!" is not displayed Change-Id: I2a116e1e769ac09915638aa9e5d7c58a4aac3cce Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13447 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09ASL: Remove unused modulo recipient.Vladimir Serbinenko
Change-Id: I4b0a3073815ec8d98c2d23cd745f027517b6fa42 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13619 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09stout: Add native gfx initVladimir Serbinenko
Tested during FOSDEM. Change-Id: Id095364d6e4735256e54a68ea9ae677355dd386a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13532 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09SeaBIOS: Disable serial console if serial is memory mappedMartin Roth
SeaBIOS only supports standard IO based serial ports. If the serial port being used by coreboot isn't a standard IO serial port, disable the serial console in the SeaBIOS build. Change-Id: I386b46625fca0bd0a5416ed9831f8370c294ed74 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13617 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09libpayload: use 32bit access when accessing 4byte wide uart registersPatrick Georgi
This fixes serial on rk3288. Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13636 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-09rockchip/rk3288: UART uses 32bit wide registersPatrick Georgi
Change-Id: I084eb4694a2aa8f66afc1f3148480608ac3ff02b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13635 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-09kconfig_lint: demote 'always defined' errors to warningsMartin Roth
To be able to run this as a lint-stable test, demote these to warnings for now. After the current CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL issues get fixed, these can be promoted again. Change-Id: I1432980eb0c871fc61c12dcc351f8d46513a7965 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13541 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09vboot2: Store depthcharge graphic assets only in ROPatrick Georgi
These files aren't updated (or updatable), and as such don't need to be copied to the RW sections. Change-Id: Ie78936792ad651fbf8500fc7e34f0899e33a904c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09kconfig_lint: Check for IS_ENABLED used on symbols without CONFIG_Martin Roth
This looks at the coreboot codebase for the IS_ENABLED macro, and gives an error if there is a symbol used without the CONFIG_ prefix. This only works for symbols of type bool. A future check will be added for all symbols, but that will take a significant amount of time to run, because each symbol will need to be searched for individually. Change-Id: I92f2de2d231610d1a788da965f21966d89c2f25c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13538 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09superio/nuvoton/nct5572d: Add PS/2 presence detectPaul Menzel
On certain Super I/O devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. This is added in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect). Update the Nuvoton NCT5572D driver to flag the auxiliary channel as disabled if no device was detected. The code is copied from the Winbond W83667HG-A driver. Note, the ACPI changes are not part of this commit. TEST=Currently, on the ASRock E350M1, PS/2 does not work. With this change, a PS/2 keyboard works fine in SeaBIOS, GRUB in MBR, and Debian GNU/Linux Sid/unstable with Linux 3.19. ``` [ 1.185195] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.189110] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.189133] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.189970] mousedev: PS/2 mouse device common for all mice ``` Change-Id: I7f9be348d295e70437bef089d4c2173169f38459 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/13618 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Kconfig: Move payloads section to payloads/KconfigMartin Roth
Move the payloads section of the kconfig tree out of the top level kconfig file and into a separate Kconfig just for payloads before it starts to get added to. Change-Id: I4f52818f862bf1aeba538c1c6ed93211a78b9853 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13608 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
For devices with Chrome EC, state the "board" name(s), so they're built as part of the image. A number of EC boards aren't supported in the Chrome EC master branch, they're brought along but commented out, waiting for a port to master in the Chrome EC code base. Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13548 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09Revert "northbridge/intel/peg: Disable unused ports"Nico Huber
This reverts commit 0e06f5bd70b45fd330d8dfb1dc77cce043caf841. It breaks gm45 and also does some magic without being asked too. It disables bridge devices permanently if no device was found on the se- condary bus. In a simple notebook world this might be ok, but it breaks hot-plugging and late detection (if a secondary bus device comes up too slow for the firmware to detect and the OS has to enumerate it). Change-Id: Ia2010640d7c55b0bdd44164b81c75dd4be50410b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/13609 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-02-09Workaround for unused variable warning.Vladimir Serbinenko
Change-Id: I0a0c925509027f98f724d0a4347146f21ac06c02 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13624 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Use temporary variable when storing register into itself.Vladimir Serbinenko
Otherwise it triggers a IASL warning with new IASL. Change-Id: I090ee18df78ea779137ee6797c55b96ea27e6d27 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13623 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Fix HPBA shadowing.Vladimir Serbinenko
Store (HPBA, HPBA) had no effect. Rename one of HPBA to avoid shadowing. Change-Id: I54bfa7bcb3e05c28fe8a257825af56527dbf663e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13622 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09rx886ex: Fix PBIF reference.Vladimir Serbinenko
PBIF is package and so a scalar can't be stored instead of it. What was meant is probably Index(PBIF, 0) Change-Id: Iddd18e1f165e0f48fd91124200aba5c6b4a5b4bd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13621 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Remove unused local variables.Vladimir Serbinenko
Change-Id: Ifcbb6916b718d41fb9cda537ffdc3e652e13cbbf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09stout: Fix ASL warningsVladimir Serbinenko
Change-Id: I1ddf37aa61fe95ad632c35d8041aed02fb1e8c01 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13533 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mainboard/lenovo: Add support for the Lenovo ThinkPad X220iChristopher Spinrath
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard directory and setting the VGA_BIOS_ID in Kconfig. Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90 Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-on: https://review.coreboot.org/13594 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-02-09intel/kunimitsu: Clean up GPIOs.Pratik Prajapati
Some of the pins are not connected/used on kunimitsu board, this patch will make them "Not connected". Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BRANCH=none BUG=none TEST=Build and booted in kunimitsu. Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488 Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316700 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/skylake: Add gpio macro for unused GPIO pinsdavid
Unused PINS will be controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BUG=none BRANCH=none TEST=Build and boot lars Change-Id: I3a6fcd2f3462e8e0d1273aa80b1599b76b160825 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 889bfd66dbc918e9fb0ba1b95b63fd7a3bf180d9 Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319964 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13628 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Documentation: Add Quark EDK2 build instructions for LinuxLee Leahy
Document the Linux build instructions for EDK2. TEST=Build EDK2 for Quark on Ubuntu 14.04 Change-Id: I5f87eb2c5879f2fd4dd18880908756089a0c7a51 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13644 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09build system: Build Chrome EC firmware on requestPatrick Georgi
With the Chrome EC's "board" name set in Kconfig, the build system will build and add the EC firmware, too. Available for the EC and the USB PD controller. Change-Id: I017d3a44d6ab8a540fcd198b4b09c35e4b98a8cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13547 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mb/intel/d510mo: Explicitly select NIC on PCI in devicetreeDamien Zammit
While the board configuration still works without this, It's nicer to have the device statically defined since the NIC is hardwired to the board. Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13455 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09console: Disable SQUELCH_EARLY_SMP if SMP is not selectedLee Leahy
Add a "depends on SMP" to the value SQUELCH_EARLY_SMP Kconfig value to disable its selection when SMP is not enabled. TEST=Build for Galileo Change-Id: Ia3aa1d2169ed793e1bb26538b74b12347453d5af Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13639 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
Add the code to enable debug serial output using HSUART1: * Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1 * Note that the BIST value is always zero as validated in esram_init.inc * The initial TSC value is currently not saved! Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if serial output is present on HSUART1 at 115200 baud, 8-bit, no parity Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13445 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-09google/lars: Set I2C[4] port voltage to 1.8vdavid
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. TEST=Built & booted lars board. Verified that I2C port 4 is operating at 1.8V level Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321000 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
Enable the option to back up Vboot non-volatile data from CMOS to flash as these boards have the necessary nvram fmap region and are using vboot2 which does not backup to the TPM. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45 Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324123 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Add option to back up VBNV CMOS into flashDuncan Laurie
This adds a new kconfig option that will back up the VBNV data from CMOS to flash, and restore it if the CMOS data is invalid during boot. This allows special flags to not get lost when power is lost, RTC reset is triggered, or CMOS is corrupted. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell: 1-boot and run "enable_dev_usb_boot" 2-reboot and check that it is enabled with crossystem 3-run "mosys nvram clear" 4-reboot and check that it is still enabled Change-Id: I38103d100117da34471734a6dd31eb7058735c12 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8a356e616c6885d5ae3b776691929675d48a28f9 Original-Change-Id: I06e7ddff7b272e579c704914a0cf8cc14d6994e8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324122 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13600 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/veyron_rialto: Remove developer mode switchAlexandru M Stan
The developer mode gpio switch on rialto is always hardcoded (through a resistor) as developer mode. We need to ignore it to allow transitions to verified mode with the virtual developer mode stuff. TEST=We can now exit dev mode on rialto Change-Id: I94a949f0973132de5fd008224af79cf612151193 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46 Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325861 Original-Commit-Ready: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/chromeos/vboot2: defer clearing rec mode switchAaron Durbin
Certain platforms query the recovery mode switch more than just within vboot during the boot flow. Therefore, it's important that the first call to get_recovery_mode_switch() is consistent through memory training because certain platforms use the recovery mode switch to take different action for memory training. Therefore, defer the clearing of the rec mode switch to a place when it's known that memory is up and online. BUG=chrome-os-partner:44827 BRANCH=glados TEST=Three finger salute is honored on chell by retraining memory. Change-Id: I26ea51de7ffa2fe75b9ef1401fe92f9aec2b4567 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6b0de9369242e50c7ff3b164cf1ced0642c7b087 Original-Change-Id: Ia7709c7346d1222e314bf3ac7e4335a63e9a5144 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325120 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13604 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/kunimitisu: set oem_id oem_table_id fields of acpi_header_tFang, Yang A
kunimitisu platform updated these two fields if maxim codec is detected. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10 Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324631 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13603 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09nhlt: add api to override oem_id and oem_table_id of acpi_header_tFang, Yang A
This patch added nhlt_soc_serialize_oem_overrides and nhlt_serilalize_oem_overrides to be able to override oem_id and oem_table_id.board file can pass specific string by calling nhlt_soc_serialize_oem_overrides kernel use these two fields to construct a topology binary name if the designate file is not found a default dfw_sst.bin will be used it is optional. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171 Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022 Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322860 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13602 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Make vbnv_flash driver safe for CAR usageDuncan Laurie
This modifies the vbnv_flash driver to make it safe for use in cache-as-ram by handling the global variables safely. To make this cleaner all of the variables were moved into one structure and referenced from there. BUG=chrome-os-partner:47915 BRANCH=glados TEST=build and boot on chell using following patches to test backup and restore of vbnv_cmos into flash Change-Id: I3a17fa51cfd754455502ac2e5f181dae35967f2a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48876561fa4fb61e1ec8f92596c5610d97135201 Original-Change-Id: Id9fda8467edcc55e5ed760ddab197ab97d1f3d25 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324121 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13599 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Remove CONFIG_VBNV_SIZE variableDuncan Laurie
The VBNV region size is determined by vboot and is not really configurable. Only the CMOS implementation defined this config variable so switch it to use VBNV_BLOCK_SIZE defined by vboot in vbnv_layout.h instead. This requires updating the broadwell/skylake cmos reset functions to use the right constant. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324520 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13598 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Add vbnv wrapper for the different backendsDuncan Laurie
Add a wrapper around the vbnv implementations and call into the different backend functions from there. Also move some of the common functions to the common code and simplify the backend drivers. This will allow some of the code to be re-used so the CMOS backend can backup the data into the flash backend. One side effect of this is that the cache of VBNV was removed from CMOS and EC backends and moved into the VBNV wrapper, but the flash backend also still has a separate cache because it has more state and complexity in the implementation. The wrapper cached data is not used for normal vbnv_read/vbnv_write because some callers need the ability to force a write if the backend storage is cleared (i.e. CMOS clear). BUG=chrome-os-partner:47915 BRANCH=glados TEST=build and boot on chell Change-Id: I4d2e0e99af7e8a44aec77ad9991507401babcca6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c30f60434a64f6c0eb9ede45d48ddafff19dd24f Original-Change-Id: Ia97f6607c5ad837b9aa10b45211137221ccb93a0 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324120 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13597 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Copy the FSP binary into ESRAM * Specify Kconfig values to easily debug ESRAM and TempRamInit code * Specify the FSP binary file location * Specify the FSP binary image ID * Specify where in the flash image the FSP image must reside * Specify the FSP data file location * Specify where to place the FSP data file in the flash image * Specify where in the ESRAM the FSP image must reside Test 1 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select ENABLE_DEBUG_LED_FINDFSP" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Test 2 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Remove "select ENABLE_DEBUG_LED_FINDFSP" * Add "select ENABLE_DEBUG_LED_TEMPRAMINIT" * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13443 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires that utils/xcompile/xcompile change the machine architecture from i686 to i586 to ensure that the Quark does not attempt to execute unsupported instructions: * Adjust Makefile.inc to add the RMU to the coreboot image * Add code to enable the ESRAM Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h file from the EDK2 tree (https://github.com/tianocore/edk2.git) to enable easy differences and correct issues in coreboot that were found in EDK2. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_RMU_FILE" * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Remove power from the board * Apply power to the board * Testing is successful if the SD LED is on indicating that the end of esram_init.inc was reached Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13440 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-08drivers/intel/fsp1_1: Make fsp_run_silicon_init publicLee Leahy
Remove the "static" declaration from fsp_run_silicon_init and declare the routine in ramstage.h. This routine can be called directly when FSP is already in RAM. TEST=Build and run on Galileo Change-Id: Iddb32d00c5d4447eab5c95b0ad5c40309afa293e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13630 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-07lint: test for assembler dialect switchesPatrick Georgi
We prefer the default AT&T dialect on x86 Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13135 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-05mainboard/intel/galileo: Add board_info.txtLee Leahy
Add missing file to fix complaints by git commit script. TEST=None Change-Id: I4aac63821a7208fb86fa6c0dda16b7537e49a69a Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13610 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: x86 add sleep state and minimal memory setupLee Leahy
Document how to add the sleep state and minimal memory setup. TEST=None Change-Id: Ibebeef34269dbf2366f1bea6d734f6bade4e4028 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13446 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: x86 Enable Serial OutputLee Leahy
Document the steps necessary to enable serial output TEST=None Change-Id: Ifc0e700d7ef54fb1e28ca9bca34b94cccd3633ac Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13444 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: Add the x86 FSP BinaryLee Leahy
Document how to add the FSP binary to the SPI flash image. TEST=None Change-Id: I51b16600ea69853240282ac2eb0d84935b8e2a71 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13442 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: Add Galileo Gen 1 DocumentationLee Leahy
TEST=None Change-Id: Ic5a732dc27e772c4708a090ecd0c0af17dc5b056 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13606 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05Documentation: Fix links to Intel/documentation.htmlLee Leahy
Fix links to the documenation.html page which was renamed from x86Documenation.html. TEST=Verified documentation links and searched for x86Documenation.html Change-Id: Icee79bab4c05ac9b8010dc7acdde8dd5e2ab2909 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13592 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kcma-d8: Add initial ASUS KCMA-D8 supportTimothy Pearson
Change-Id: Idefa304a27823c741fab72ff5c2f20fed1aa5a39 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13523 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kcma-d8: Copy ASUS KGPE-D16 for initial support workTimothy Pearson
Also updated KGPE-D16 strings to KCMA-D8 throughout the copy to work around Jenkins failures caused by an unmodified clone. Change-Id: I943e81c8c2987a8333fc2a1cdb3675abf2d90cf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13521 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Add CPB control CMOS optionTimothy Pearson
Change-Id: I28ad2298ad4dfb428dcd41a4f00db88c5e817cd7 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13173 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05cpu/amd/fam10h-fam15h: Honor CMOS option to disable CPB (core boost)Timothy Pearson
On certain systems and CPUs Core Performance Boost (CPB) may cause sporadic system lockups. This issue is also somewhat known on the various proprietary BIOSes, therefore it seems to be a hardware incompatibility when present. Allow the user to disable CBP if needed. Change-Id: Id6395d067d48963f6c084ad0bf79e23419af24d8 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13172 Tested-by: build bot (Jenkins) Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2016-02-05nb/amd/mct_ddr3: Fix RDIMM training failure on Fam15hTimothy Pearson
Certain registered DIMMs failed training due to an error likely introduced during historical rebase. Ensure that the SubMemclkRegDly bit is set according to BKDG recommendations on Family 15 processors. Change-Id: I24c95265dada9eabf4df280b6f2b4a1eb9cecaf1 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13148 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05nb/amd/mct_ddr3: Work around RDIMM training failureTimothy Pearson
Under certain conditions, not elucidated in the BKDG, an extra memclock of CAS write latency is required. The only reliable way I have found to detect when this is required is to try training without the delay, and if DQS position training fails, adding the delay and retraining. This is probably related in some form or another to the badly broken DQS Write Early algorithm given in the BKDG. Change-Id: Idfaca1b3da3f45793d210980e952ccdfc9ba1410 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13531 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05cpu/amd/fam10h-15h: Set PowerStepUp/PowerStepDown on Fam15hTimothy Pearson
Multilink Family 15h processors were being configured with an incorrect PowerStepUp/PowerStepDown value. Set the value according to the BKDG, and clean up the terrible formatting of the power_up_down() function that led to the incorrect values being overlooked until now. Also change u32 declarations to uint32_t in modified functions. Change-Id: I16e1f5205d6b5f349a3e7167dea04c9eefda4684 Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13174 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-05mainboard/asus/kgpe-d16: Update power LED handlingTimothy Pearson
- Stop blinking when coming out of standby. - Remove code to set blink when going into S3. This never worked correctly. Change-Id: I958990f3203d3cbe7ae64833800d631c1034327f Signed-off-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-on: https://review.coreboot.org/13171 Tested-by: build bot (Jenkins) Tested-by: Raptor Engineering Automated Test Stand <noreply@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-053rdparty/chromeec: Add Chrome EC firmware sourcesPatrick Georgi
Note that this is a manually added commit id (to get the CrEC fixes in that are necessary for building outside cros_sdk), so it will probably fail. Change-Id: Idc15cf268c663ae49b209b92b198c9a4d122c7e3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13546 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04Documentation: Add x86 bootblock supportLee Leahy
Document what is involved with adding the bootblock support. TEST=None Change-Id: I6c8cc38e1b9346b4962588b33ca5e4ab8eac24c3 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13441 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04mainboard/intel/galileo: Add Intel Galileo Gen 2 SupportLee Leahy
Add the files to build soc/intel/quark and mainboard/intel/galileo for a minimal coreboot image. Please note that this configuration does not run. Include HTML documentation for the Galileo Gen 2 board. Testing is successful if build completes successfully. TEST=Build for Galileo Change-Id: Idd3fda1b8ed9460fa8c92e6dcaa601c3c9f63a36 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13507 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-04skylake boards: disable ACPI PM TimerArchana Patni
These devicetree patches set the ACPI PM Disabled variable to 1. This will disable the ACPI PM timer and remove from FADT table. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Ia66f37e13f0f2f527651418b8b5c337b56c25c7f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: db3e8130495038850c7034b89701b4a5fcf88dce Original-Change-Id: Ib1b876cfa361b8cbdde2f9e212e3da4fd724e498 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319362 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13589 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: disable ACPI PM Timer to enable XTAL OSC shutdownArchana Patni
Keeping ACPI PM timer alive prevents XTAL OSC shutdown in S0ix which has a power impact. Based on a DT variable, this patch disables the ACPI PM timer late in the boot sequence - disabling earlier will lead to a hang since the FSP boot flow needs this timer. This also hides the ACPI PM timer from the OS by removing from FADT table. Once the ACPI PM timer is disabled, TCO gets switched off as well. BRANCH=none BUG=chrome-os-partner:48646 TEST=Build for skylake board with the PmTimerDisabled policy in devicetree set to 1. iotools mmio_read32 0xfe0000fc should return 0x2. cat /sys/devices/system/clocksource/clocksource0/available_clocksource should list only "tsc hpet". acpi_pm should be removed from this list. Change-Id: Icfdc51bc33b5190a55196d67e18afdaaa2f9b310 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 18bcb8a434b029295e1f1cc925e2b47e79254583 Original-Change-Id: Ifebe8bb5a7978339e07e4e12e174b9b978135467 Original-Signed-off-by: Archana Patni <archana.patni@intel.com> Original-Signed-off-by: Subramony Sesha <subramony.sesha@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319361 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13588 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: unconditionally set SPI controller BARAaron Durbin
The setting of the SPI controller BAR was conditional on the nominal frequency being set. Therefore, that doesn't mean the SPI BAR is set on all boots. Move the setting of the BAR in the southbridge_bootblock_init() which is called prioer to cpu_bootblock_init(). BUG=chrome-os-partner:44827 BRANCH=None TEST=Confirmed spibar is always set on glados. Change-Id: Ia58447d70f5e39a4336d4d08593f143332de833a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 56fff7c25c2eb0ccd90e08f71c064b83c66640f8 Original-Change-Id: I1e0cff783f4b072b80589a3a84703a262b86be3a Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/319461 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13587 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeos/vboot2: honor boot region device sizeAaron Durbin
Vboot keeps track of the size of the hashed region in each RW slot. While that size was being used to calculate the hash it wasn't being honored in restricting the access within the FMAP region for that RW slot. To alleviate that create a sub region that covers the hashed data for the region in which we boot from while performing CBFS accesses. BUG=chrome-os-partner:49764 BUG=chromium:445938 BRANCH=glados TEST=Built and booted chell with cbfstool and dev-util patches. Change-Id: I1a4f45573a6eb8d53a63bc4b2453592664c4f78b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4ac9e84af5b632e5735736d505bb2ca6dba4ce28 Original-Change-Id: Idca946926f5cfd2c87c4a740ad2108010b6b6973 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324093 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13586 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/lars: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=None Change-Id: I331f25ad4764cab972af7198f6154f604d2dbeae Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 2c1cb04645cbf34696e6adf48acec9d396e87ca9 Original-Change-Id: I8d14ea16b2d07bbf04c5c33e4205a85d9f21847b Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324075 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13585 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/kunimitsu: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built kunimitsu w/ separate verstage. Change-Id: If34cae5516a6df7f72f1f57cab495db70787177e Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 543155665e1b05efe82c7440c124a5c83c656aa6 Original-Change-Id: I7281c4373fcbaaf0beedaa63dcf0dedb5316349f Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324074 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13584 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/glados: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built glados w/ separate verstage and booted. Change-Id: I626a500c183d21f94d976e24f09af15a242fba9c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: b564514a8b93f53a919fcdac3589e30dbac82124 Original-Change-Id: Icc989ec5700b3f1a144a6b41198b7dd2c2aac6f7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324073 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13583 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chell: perform early init for CAR *stageAaron Durbin
In order to support both separate verstage and a verified boot after romstage one needs to ensure the proper GPIO and EC configuration been complete. Therefore, move that logic to car_mainboard_post_console_init() in car.c file which gets called in the early flow of a CAR stage (either verstage or romstage). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell w/ separate verstage and booted. Change-Id: Ic728c2904006376fdc2b27b512f72173a2260be3 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 42d190af8996fea894305ebe686afbfda5f2b8a5 Original-Change-Id: I95aeb97737d0ddfa6c53269c9d14db16ed5e47cc Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324072 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13582 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04google/chromeos: guard cbmem_find() in verstage and bootblockAaron Durbin
When vboot_handoff_flag() is called in the bootblock or a separate verstage there's no memory nor the possibility of dram coming online. Therefore, don't bother to attempt call cbmem_find(). BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell with separate verstage which pulls in vboot_common.c dependency. No more linking errors w/ cbmem_find() not being around. Change-Id: I494c93adc1c00459fdfaa8ce535c6b4c884ed0fb Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 414ce6aeaff657dc90289b25e5c883562189b154 Original-Change-Id: I8a5f2d154026ce794a70e7ec38883fa3c28fb6e7 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324070 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13580 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-04lib: add bootmode.c to verstageAaron Durbin
Some of the functions within bootmode.c may be required by boards in verstage. Therefore, allow this file to be built in verstage. BUG=chrome-os-partner:44827 BRANCH=glados TEST=Built chell w/ bootmode.c dependencies in separate verstage. Change-Id: Id291c1b5cc6594c3ee16c7c3385e682addc0efb6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 084b620e12e7f948087786c0e34d5999a73137a5 Original-Change-Id: I2207819ec1490767cb1cf4b92e34e714783c1c22 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324071 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13581 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-04intel/skylake: implement vboot_platform_prepare_reboot()Aaron Durbin
In order to not reboot loop in the face of failed vboot verification on resume set the PM1 control register to indicate S5. After the subsequent cold reset the PM1 control register will indicate S5 as it should. BUG=chrome-os-partner:46049 BRANCH=glados TEST=On chell injected failed vboot verification. Ensured a reboot loop doesn't ensue. Change-Id: Ie5e9e3f6441a217a5e02b4d78aaf21f8249b8a43 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a63b57d7bc59bcaf5518f7cc4afccd3d5da6df1c Original-Change-Id: I5e467854bf065a138bd46e476a7e7088f51454ca Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323504 Original-Reviewed-by: Patrick Georgi <pgeorgi@chromium.org> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13579 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 03:43:13 +0000