summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-11-05soc/mediatek/mt8186: Enable and initialize EINTRex-BC Chen
EINT event mask register is used to mask EINT wakeup source. All wakeup sources are masked by default. Since most MediaTek SoCs do not have this design, we can't modify the kernel EINT upstream driver to solve the issue 'Can't wake using power button (cros_ec) or touchpad'. So we add a driver here to unmask all wakeup sources. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I84946c2c74dd233419cb94f013a42c734363baf7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58938 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: Add timer supportRex-BC Chen
Add timer drivers to use timer function. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I6524e4dec4cbe7f7eb75a7940c329416559a03c8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58937 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: Add PLL and clock init supportChun-Jie Chen
Add PLL and clock init code, frequency meter and APIs for raising little CPU/CCI frequency. TEST=build pass BUG=b:202871018 Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com> Change-Id: Id46d0708e7ba0c1a4043a5dce33ef69421cb59c5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58936 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05mb/google: Fix indirect include bootmode.hKyösti Mälkki
Change-Id: I882c567e6bca0982a0d3d44c742777c4d7bd5439 Signed-off-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58920 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05mb/google/corsola: Add NOR-Flash supportRex-BC Chen
Add NOR-Flash drivers to pass verification of flash at verstage. TEST=boot to romstage BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Iee3dd336632b0cf998f5f7c1d118e01e8270e815 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58838 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05soc/mediatek/mt8186: add NOR-Flash GPIO setting in soc folderRex-BC Chen
The NOR-Flash can be configured on SPI0 or TDM-RX GPIOs so we have to provide an init function in SoC for the mainboard to select right configuration. TEST=boot to romstage BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I285ec64ace8b72a48ef1d481d366bd67cb9b0337 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58935 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-05spd: Add lp5 directory with empty memory_parts fileReka Norman
Add spd/lp5/memory_parts.json with an empty parts list, then run spd_gen to generate the manifests and empty SPD. Generated using: util/spd_tools/bin/spd_gen spd/lp5/memory_parts.json lp5 BUG=b:204284866 TEST=None Change-Id: I0314314130a1ccc58fb5a0416b110e7a86338fd0 Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58928 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05mb/google/taeko: Update the FIVR configurationsKevin Chang
This patch sets the enable the external voltage rails since taeko board have V1p05 and Vnn bypass rails. BRANCH=None BUG=b:204832954 TEST=FW_NAME=Check in FSP log and run PLT test Signed-off-by: Kevin Chang <kevin.chang@lcfc.corp-partner.google.com> Change-Id: I20ff310d48d3e7073fe5e94d03d29cc55a46d1f9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05mb/google/brya/var/felwinter: Correct typeC EC mux portEric Lai
Type C port2 uses EC mux port0 as per schematics. BUG=b:204230406 TEST=No error message in depthahrge. update_port_state: port C2: get_usb_pd_mux_info failed Signed-off-by: Eric Lai <ericr_lai@compal.corp-partner.google.com> Change-Id: I85218c81018b248c41a2cdaf9360a86e2a7d4d7a Reviewed-on: https://review.coreboot.org/c/coreboot/+/58930 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05amdfwtool: Change the flag value to type boolZheng Bao
Change-Id: I8bb87e6b16b323b26dd5b411e0063e2e9e333d05 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58942 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05amdfwtool: Fix the parameter point to NULL instead of integerZheng Bao
Change-Id: Iaeeec7a7e2de7847bfcefa5b7ff3f259f86533d4 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58941 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05amdfwtool: Change the definition of level to a bitwise formZheng Bao
Change-Id: Icca393f0d69519cc1c3cb852a11dd7006cf72061 Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58765 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05Documentation/acpi/gpio.md: Update implementation detailsArthur Heymans
The weak functions were removed in bce7458 "acpi/acpigen.c: Remove weak gpio definition". Change-Id: Ia6e51698d6209fbf4f59b7fbc988a1aa696e366f Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-05soc/intel/denverton_ns: Refactor `detect_num_cpus_via_cpuid()`Angel Pons
Rewrite level type check and use unsigned types. In addition, also use unsigned types in the `get_cpu_count()` function. Change-Id: I63f236f0f94f9412ec03ae25781befe619cf7c1f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58913 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05soc/intel/xeon_sp: Refactor `get_threads_per_package()`Angel Pons
Reduce the visibility of the `get_threads_per_package()` function and retype its return value to `unsigned int`. Change-Id: Ie71730d9a89eb7c4bb82d09d140fbcec7a6fe5f3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05soc/intel/braswell: Make `num_cpus` unsignedAngel Pons
Change-Id: Iff6da3dc9c744a3dae3f4dd4ac37a91f348450a3 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05soc/intel/baytrail: Make `num_cpus` unsignedAngel Pons
Change-Id: I9ab0106c27a834d5d2ac1cb8023f4400a8ad91cd Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58916 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-05nb/intel/haswell/northbridge.c: Drop stale commentAngel Pons
This can now be controlled with the `MMCONF_BUS_NUMBER` Kconfig option. Change-Id: If0fdefc5b4339acc843443c551892b397ed39c2e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58922 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04util/testing: add code coverage to jenkinsPaul Fagerburg
Add COV=1 and the `coverage-report` target to unit test build rules in `what-jenkins-does` so that we get code coverage data from the coreboot and libpayload unit tests. Signed-off-by: Paul Fagerburg <pfagerburg@google.com> Change-Id: I96669c47d1a48e9ab678a4b9cb1d0c8032d727f0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin Roth <martinroth@google.com>
2021-11-04treewide: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I329efcb42a444b097794fde4f40acf5ececaea8c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58910 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Lance Zhao
2021-11-04superio: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: Ic6e28add78f686fc9ab4556eddbedf7828fba9ef Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58909 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-04drivers: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: Ia9a4b62c857f7362d67aee4f9de3bb2da1838394 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58908 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-04soc/intel: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I2a57ea1c2f5b156afd0724829e5b1880246f351f Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58907 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-04nb/intel: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I617fea8a09049e9a87130640835ea6c3e2faec60 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58906 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-04sb/intel: Replace bad uses of `find_resource`Angel Pons
The `find_resource` function will never return null (will die instead). In cases where the existing code already accounts for null pointers, it is better to use `probe_resource` instead, which returns a null pointer instead of dying. Change-Id: I13c7ebeba2e5a896d46231b5e176e5470da97343 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58905 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-04soc/amd/common/block/spi: Add prompt to SOC_AMD_COMMON_BLOCK_SPI_DEBUGRaul E Rangel
Makes it so I can enable SPI debugging without modifying the source. BUG=b:179699789 TEST=Add CONFIG_SOC_AMD_COMMON_BLOCK_SPI_DEBUG=y to my .config Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: Ie3815e0398b5268874039196a625fc29dd3dc3d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04Kconfig,soc/amd/cezanne: Make COOP_MULTITASKING select TIMER_QUEUERaul E Rangel
This reduces the number of selects required in the SOC_SPECIFIC_OPTIONS. BUG=b:179699789 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7f1364fc269ea5ec17982bf750a164a3290adb0e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58860 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04lib/cbfs: Add cbfs_preload()Raul E Rangel
This API will hide all the complexity of preloading a CBFS file. It makes it so the callers simply specify the file to preload and CBFS takes care of the rest. It will start a new thread to read the file into the cbfs_cache. When the file is actually required (i.e., cbfs_load, etc) it will wait for the preload thread to complete (if it hasn't already) and perform verification/decompression using the preloaded buffer. This design allows decompression/verification to happen in the main BSP thread so that timestamps are correctly reflected. BUG=b:179699789 TEST=Test with whole CL chain, verify VGA bios was preloaded and boot time was reduced by 12ms. Logs: Preloading VGA ROM CBFS DEBUG: _cbfs_preload(name='pci1002,1638.rom', force_ro=false) CBFS: Found 'pci1002,1638.rom' @0x20ac40 size 0xd800 in mcache @0xcb7dd0f0 spi_dma_readat_dma: start: dest: 0x021c0000, source: 0x51cc80, size: 55296 took 0 us to acquire mutex start_spi_dma_transaction: dest: 0x021c0000, source: 0x51cc80, remaining: 55296 ... spi_dma_readat_dma: end: dest: 0x021c0000, source: 0x51cc80, remaining: 0 ... CBFS DEBUG: _cbfs_alloc(name='pci1002,1638.rom', alloc=0x00000000(0x00000000), force_ro=false, type=-1) CBFS: Found 'pci1002,1638.rom' @0x20ac40 size 0xd800 in mcache @0xcb7dd0f0 waiting for thread took 0 us CBFS DEBUG: get_preload_rdev(name='pci1002,1638.rom', force_ro=false) preload successful In CBFS, ROM address for PCI: 03:00.0 = 0x021c0000 PCI expansion ROM, signature 0xaa55, INIT size 0xd800, data ptr 0x01b0 PCI ROM image, vendor ID 1002, device ID 1638, PCI ROM image, Class Code 030000, Code Type 00 Copying VGA ROM Image from 0x021c0000 to 0xc0000, 0xd800 bytes $ cbmem ... 40:device configuration 5,399,404 (8,575) 65:Option ROM initialization 5,403,474 (4,070) 66:Option ROM copy done 5,403,488 (14) ... Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I879fc1316f97417a4b82483d353abdbd02b98a31 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56491 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-04lib/thread: Use __func__ instead of repeating function nameRaul E Rangel
This cleans up the warning message: WARNING: Prefer using '"%s...", __func__' to using 'thread_run', this function's name, in a string BUG=b:179699789 TEST=boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I85bacb7b2d9ebec40b6b05edc2ecf0ca1fc8ceee Reviewed-on: https://review.coreboot.org/c/coreboot/+/58867 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-04lib/thread: Add ERROR prefix to error messagesRaul E Rangel
This makes it easier to grep for errors. BUG=b:179699789 TEST=Boot guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I7eecdfed6046b7d609069e7427f6883a4e9e521d Reviewed-on: https://review.coreboot.org/c/coreboot/+/58866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-04tests: Move x86 I/O functions to include/mock/arch/io.hJakub Czapiga
Move th x86 I/O functions declarations from tests mocks to the mock architecture io.h. This will make x86 I/O-dependent tests simpler, because the x86_io.h from mocks will not have to be included manually. Change-Id: Ie7f06c992be306d2523f2079bc90adf114b93946 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58881 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-04mb/google/sarien: Add OEM product namesFelix Singer
Add OEM product names from public sources. Change-Id: Ic051aa9c8afabd47e7e9f6ac878190d9904ef757 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-04mb/siemens/mc_ehl: Disable PMC low power modesWerner Zeh
All the mainboard variants of mc_ehl do not use the external switches for the bypass rails. Disable the matching UPDs and all the low power modes of the PMC. Change-Id: I08f4effe5c4d5845bed01dfe1bd1251c58012b7f Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58895 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-04mb/siemens/mc_ehl: Disable all P-StatesWerner Zeh
In order to get a reliable real-time performance disable all P-States for all mc_ehl based mainboard. Change-Id: I22857cc0f1476483ca82c1c872e4519e4b350ea9 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58894 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-11-04mb/siemens/mc_ehl: Disable C-States for CPU and packageWerner Zeh
Disable all C-states other than C0/C1 for CPU and package. Change-Id: I2c163f859dab4b0dc02896c70122e993cdd3db72 Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58893 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com>
2021-11-04util/spd_tools: Add LP5 support for ADLReka Norman
Add LP5 support to spd_tools. Currently, only Intel Alder Lake (ADL) is supported. The SPDs are generated based on a combination of: - The LPDDR5 spec JESD209-5B. - The SPD spec SPD4.1.2.M-2 (the LPDDR3/4 spec is used since JEDEC has not released an SPD spec for LPDDR5). - Intel recommendations in advisory #616599. BUG=b:201234943, b:198704251 TEST=Generate the SPD and manifests for a test part, and check that the SPD matches Intel's expectation. More details in CB:58680. Change-Id: Ic1e68d44f7c0ad64aa9904b7e1297d24bd5db56e Signed-off-by: Reka Norman <rekanorman@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58679 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2021-11-04mb/siemens/mc_ehl2: Clean up devicetreeMario Scheithauer
There are a bunch of devices in the devicetree that are disabled in FSP-S and not used on this board. Having them around in the devicetree, even if disabled, is not necessary and leads to a message in the log (left over static devices...check your devicetree). This commit cleans up devicetree.cb and removes all unused and disabled devices. Change-Id: I7486f9ba362c80b43b6c888a3b40a4c947218299 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58887 Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-04lib: Add list.c to all stagesRaul E Rangel
This will be used in cbfs.c which is used in all stages. BUG=b:179699789 TEST=Build guybrush Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I0713ae766c0ac9e43de702690ad0ba961d636d18 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58804 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-04arch/x86/Makefile: Align VGA_BIOS to 64 bytes when using AMD LPC SPI DMARaul E Rangel
AMD platforms require the SPI contents to be 64 byte aligned in order to use the SPI DMA controller. BUG=b:179699789 TEST=Build guybrush and verify cbfs was invoked with -a 64 Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I842c85288acd8f7ac99b127c94b1cf235e264ea2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56579 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-04soc/amd/common/block/lpc: Set CBFS_CACHE_ALIGN to 64 when using SPI DMARaul E Rangel
AMD platforms require the destination buffer to be 64 byte aligned when using the SPI DMA controller. BUG=b:179699789 TEST=gdb -ex 'p cbfs_cache' /tmp/coreboot/guybrush/cbfs/fallback/ramstage.debug $1 = {buf = 0x0, size = 0, alignment = 64, last_alloc = 0x0, second_to_last_alloc = 0x0, free_offset = 0} Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I228372ff19f958c8e9cf5e51dcc3d37d9f92abec Reviewed-on: https://review.coreboot.org/c/coreboot/+/58707 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-04lib/cbfs: Add CBFS_CACHE_ALIGN Kconfig optionRaul E Rangel
This option will allow platforms to set the alignment of the cbfs_cache buffers. BUG=b:179699789 TEST=gdb -ex 'p cbfs_cache' /tmp/coreboot/guybrush/cbfs/fallback/ramstage.debug $1 = {buf = 0x0, size = 0, alignment = 8, last_alloc = 0x0, second_to_last_alloc = 0x0, free_offset = 0} Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I74598d4bcbca9a01cc8c65012d7e4ae341d052b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58706 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-04commonlib/mem_pool: Allow configuring the alignmentRaul E Rangel
AMD platforms require the destination to be 64 byte aligned in order to use the SPI DMA controller. This is enforced by the destination address register because the first 6 bits are marked as reserved. This change adds an option to the mem_pool so the alignment can be configured. BUG=b:179699789 TEST=Boot guybrush to OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I8d77ffe4411f86c54450305320c9f52ab41a3075 Reviewed-on: https://review.coreboot.org/c/coreboot/+/56580 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-04amd/i2c: Remove the weak functionZheng Bao
BUG=b:140165023 Change-Id: Ieedd6c9f3abeed9839892e5d07127862cd47d57f Signed-off-by: Zheng Bao <fishbaozi@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58771 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04mb/google/guybrush: Set Gen3 default for all PCIe devicesMatt Papageorge
Currently link_speed_capability is not specified within the DXIO descriptors sent to FSP. This value specifies the maximum speed that a PCIe device should train up to. The only device on Monkey Island that is not currently running at full speed is the NVME but this may not always be the case. BUG=b:204791296 TEST=Boot to OS and check link speed with LSPCI to verify NVME link speed goes from 2.5 GT/s to 5 GT/s Change-Id: Ibeac4b9e6a60567fb513e157d854399f5d12aee9 Signed-off-by: Matt Papageorge <matthewpapa07@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58799 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com>
2021-11-04mb/google/brya/var/kano: Update GPIO table for speak and dmicDavid Wu
Refer to intel doc #627075 (Intel_600_Series Chipset_Family_PCH_GPIO_Impl_Sumry_ Rev1p5p1) Set GPIO GPP_S0 ~ GPP_S3 to NF4 and GPP_R6 ~ GPP_R7 to NF3. BUG=b:204844177 b:202913826 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: Iafe52ec3a6deead1d2fc5ada0f2842cf2a9f41a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58877 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: CT Lin <ctlin0@nuvoton.corp-partner.google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-04mb/google: Add OEM product names for various boardsMartin Roth
All of these names came from public sources. Signed-off-by: Martin Roth <martin@coreboot.org> Signed-off-by: Matt DeVillier <matt.devillier@gmail.com> Change-Id: I1ed9cc0c1ff63dc415e0cc63fa9d2dcd429a093b Reviewed-on: https://review.coreboot.org/c/coreboot/+/57392 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-04SMBIOS/SCONFIG: Allow devtree-defined Type 41 entriesAngel Pons
Introduce the `smbios_dev_info` devicetree keyword to specify the instance ID and RefDes (Reference Designation) of onboard devices. Example syntax: device pci 1c.0 on # PCIe Port #1 device pci 00.0 on smbios_dev_info 6 end end device pci 1c.1 on # PCIe Port #2 device pci 00.0 on smbios_dev_info 42 "PCIe-PCI Time Machine" end end The `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` Kconfig option enables using this syntax to control the generated Type 41 entries. When this option is enabled, Type 41 entries are only autogenerated for devices with a defined instance ID. This avoids having to keep track of which instance IDs have been used for every device class. Using `smbios_dev_info` when `SMBIOS_TYPE41_PROVIDED_BY_DEVTREE` is not enabled will result in a build-time error, as the syntax is meaningless in this case. This is done with preprocessor guards around the Type 41 members in `struct device` and the code which uses the guarded members. Although the preprocessor usage isn't particularly elegant, adjusting the devicetree syntax and/or grammar depending on a Kconfig option is probably even worse. Change-Id: Iecca9ada6ee1000674cb5dd7afd5c309d8e1a64b Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57370 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2021-11-04mb/siemens/mc_ehl: Enable Row-Hammer preventionMario Scheithauer
As a prevention of Row-Hammer attacks enable the FSP-M parameter 'RhPrevention'. Change-Id: I52f68525e882aee26822d9b3c488639c00f27d17 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-04mb/siemens/mc_ehl2: Configure SD card detect pin in devicetreeMario Scheithauer
This configures GPIO GPP_G5 as an input pin for SD card detect. Change-Id: I708eb112fa054f2f88857001c409fb62493b6206 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58855 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-04mb/siemens/mc_ehl2: Clean up PCIe root port settings in devicetreeMario Scheithauer
PCIe root ports #4 (00:1c.3) and #6 (00:1c.5) are currently not used on this mainboard and are not routed either, so remove them from the devicetree completely. PCIe root port #7 (00:1c.6) is connected and used. Add the missing settings for L1 substates and latency reporting to disable these features for this port as well. Change-Id: I47e8528bea993ed527a0aecdbc93b94bbd9a7a49 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58853 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com>
2021-11-04mb/siemens/mc_ehl2: Adjust PCIe clock settings in devicetreeMario Scheithauer
On mc_ehl2 there are currently four of the six PCIe clocks used to drive PCIe devices. None of the used clock output is dedicated to a special device. Therefore do not use a port mapping of the clocks to avoid a stopping clock once a device is missing and the matching root port is disabled. Instead set the mapping to 'PCIE_CLK_FREE' to have a free running clock. In addition, use the defined constant 'PCIE_CLK_NOTUSED' instead of the value 0xFF to disable the CLKREQ-feature and unused clocks. Change-Id: I81419887b7f463a937917b971465245c1cb46b94 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58852 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-by: Lean Sheng Tan <lean.sheng.tan@intel.com>
2021-11-04mb/google/guybrush/bootblock: add comment on selecting eSPI interfaceFelix Held
Setting the PM_ESPI_CS_USE_DATA2 bit in PM_SPI_PAD_PU_PD results in the eSPI transactions being sent via the SPI2 pins instead of the SPI1 pins. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iad8e3a48496a52c14c936ab77c75dc1b403f47bb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04soc/amd/cezanne/include/gpio: fix GPIO 106 native function namesFelix Held
The name looked a bit odd and the Cezanne PPR #56569 Rev 3.03 confirmed that the native function names don't have the EMMC_ prefix. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I917c74afd98f2e2133e160d352f11f08c19a3ec6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58874 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04soc/amd/cezanne/include/cppc: use AMD_CEZANNE_CPPC_H as include guardFelix Held
This makes this header file consistent with the rest. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ice2872b4a24032d3a65777795943602cd2595de7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58864 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-04mb/system76/*: Enable HECI deviceTim Crawford
The HECI device needs to be enabled to send the commands to have the CSME change between Soft Temporary Disable mode and Normal mode. Change-Id: I668507e3b522137bcc827aa615dab1fccd1709a0 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58670 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-04soc/mediatek/mt8186: Add NOR-Flash supportRex-BC Chen
Add NOR-Flash drivers to pass verification of flash at verstage. TEST=boot to romstage BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: If51d765e1fd4895f97898710ec6fa1374e1048fb Reviewed-on: https://review.coreboot.org/c/coreboot/+/58837 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-04mb/purism/librem_skl: Clean up hda_verb.cAngel Pons
Use the `AZALIA_RESET` macro, write hex values in lowercase and remove redundant comments. Also express verb length in decimal. Tested with BUILD_TIMELESS=1, Purism Librem 15 v4 remains identical. Change-Id: Id9f5ff9614a8f8c0b7f3a3c633a1dcdda8c5876c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58903 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-04mb/purism/librem_bdw/hda_verb.c: Rewrite using macrosAngel Pons
Rewrite the HDA configuration using macros for clarity. Tested with BUILD_TIMELESS=1, Purism Librem 13 v1 remains identical. Change-Id: I987a41329425a5c8c7169a7fa66a34de5742532e Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2021-11-04device/azalia_device.h: Rewrite verb macrosAngel Pons
Introduce the `AZALIA_VERB_12B` macro to encode HDA commands with 12-bit verb identifiers and rewrite existing helper macros to use it. Tested with BUILD_TIMELESS=1, Purism Librem Mini remains identical. Change-Id: I5b2418f6d2faf6d5ab424949d18784ca6d519799 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58901 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-04device/azalia_device.h: Guard macro parametersAngel Pons
Add parentheses around macro parameters to avoid operation order issues. Change-Id: Ic984a82da5eb31fc2921cff3265ac5ea2be098c7 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58900 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2021-11-03soc/mediatek/mt8186: Add GPIO driversGuodong Liu
Add GPIO drivers to let other module control GPIOs. TEST=build pass BUG=b:202871018 Signed-off-by: Guodong Liu <guodong.liu@mediatek.corp-partner.google.com> Change-Id: Ice342ab94397db8bc0fbbeb8fb5ee7e19de871ee Reviewed-on: https://review.coreboot.org/c/coreboot/+/58836 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03mb/google/trogdor: Mark kingoftown as supporting Parade PS84640Kevin Chiu
BUG=b:204272905 BRANCH=master TEST=emerge-trogdor coreboot Signed-off-by: Kevin Chiu <kevin.chiu@quantatw.com> Change-Id: Ie13ddfef6adfd53adb0a0d3a98995fb00b8a45e6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58789 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Philip Chen <philipchen@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-03soc/mediatek/mt8186: Initialize watchdogRex-BC Chen
MT8186 requires writing speical value to mode register to clear status register. The flow of clear status is different from other platforms, so we override mtk_wdt_clr_status() for MT8186. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I290b69573a8e58db76814e16b5c17c23413f1108 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58835 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/mediatek: Add an overridable function for WDT clear statusRex-BC Chen
mtk_wdt_clr_status is different for MT8186 and MT8195, so we move this function to soc folder. TEST=build pass BUG=b:202871018 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: Ia8697ffdca1e2d1443f2259713c4ab6fdf1b1a9e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58834 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/amd/cezanne/include/aoac_defs: drop leading newlineFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8458fbee7edd19117a207f39ac8f9575b1374fbc Reviewed-on: https://review.coreboot.org/c/coreboot/+/58863 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/cezanne/include: replace PICASSO with CEZANNE in include guardsFelix Held
Somehow missed renaming those when creating the coreboot support for Cezanne. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I13c28f67d32ba987987cfc2b45e248d535ccdca9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58862 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/amd/*/cpu: handle mp_init_with_smm failureFelix Held
When the mp_init_with_smm call returns a failure, coreboot can't just continue with the initialization and boot process due to the system being in a bad state. Ignoring the failure here would just cause the boot process failing elsewhere where it may not be obvious that the failed multi-processor initialization step was the root cause of that. I'm not 100% sure if calling do_cold_reset or calling die_with_post_code is the better option here. Calling do_cold_reset likely here would likely result in a boot-failure loop, so I call die_with_post_code here. BUG=b:193809448 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ifeadffb3bae749c4bbd7ad2f3f395201e67d9e28 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03cpu/amd/mtrr: Remove topmem global variablesArthur Heymans
The comments are not correct anymore. With AGESA there is no need to synchronize TOM_MEMx msr's between AP's. It's also not the best place to do so anyway. Change-Id: Iecbe1553035680b7c3780338070b852606d74d15 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58693 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2021-11-03cpu/x86/Kconfig: Remove unused CPU_ADDR_BITSArthur Heymans
Change-Id: I88f62c18b814ac0ddd356944359e727d6e3bba5a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com>
2021-11-03cpu/amd/mtrr/amd_mtrr.c: Remove unused functionsArthur Heymans
AGESA sets up MTRRs so these functions are now unused. Change-Id: Ic2bb36d72944ac86c75c163e130f1eb762a7ca37 Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58689 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-03soc/amd/stoneyridge/cpu: remove unneeded line break in get_cpu_countFelix Held
The line length is no longer limited to 80 characters, so there's no need for that line break any more. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7a8fb472f00e039f25a71ee526a3dd0bc6c754f6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-03soc/intel/xeon_sp: disable PM ACPI timer if chosenMichael Niewöhner
Disable the PM ACPI timer during PMC init, when `USE_PM_ACPI_TIMER` is disabled. This is done to bring SKL, CNL, DNV in line with the other platforms, in order to transition handling of the PM timer from FSP to coreboot in the follow-up changes. Disabling is done in `finalize` since FSP makes use of the PMtimer. Without PM Timer emulation disabling it too early would block. Change-Id: If85c64ba578991a1b112ceac7dd10276b58b0900 Signed-off-by: Michael Niewöhner <foss@mniewoehner.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58389 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lance Zhao
2021-11-03soc/intel/alderlake: Allow devicetree override to leave some VR settings as ↵Bora Guvendik
default Allow devicetree override to leave ac_loadline, dc_loadline and icc_max as default. Test=Boot to OS Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I715345d5ea83aed9ee929b2a4e13921c9d8895b1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58807 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-03cpu/amd: Always fetch CPU addr bits at runtimeArthur Heymans
All supported AMD CPUs support getting the physical address size from cpuid so there is no need for a Kconfig default value. Change-Id: If6f9234e091f44a2a03012e7e14c380aefbe717e Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58686 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-03lib/list: Add list_appendRaul E Rangel
This method will add a node to the end of the list. BUG=b:179699789 TEST=Boot guybrush to the OS Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I1792e40f789e3ef16ceca65ce4cae946e08583d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58805 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2021-11-03mb/google/corsola: Add MediaTek MT8186 reference boardRex-BC Chen
Add mainboard folder and drivers for new reference board 'Corsola'. TEST=build pass BUG=b:200134633 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I2d701c03c97d3253effb6e93a2d55dcf6cf02db6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58648 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2021-11-03soc/mediatek/mt8186: Add a stub implementation of the MT8186 SoCRex-BC Chen
Add new folder and basic drivers for Mediatek SoC 'MT8186'. Difference of modules including in this patch between MT8186 and existing SoCs: Timer: Similar to MT8195, MT8186 uses v2 timer. EMI/PLL/SPI: Different from existing SoCs. TEST=boot from SPI-NOR and show uart log on MT8186 EVB BUG=b:200134633 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I579f79c15f4bf5e1daf6b35c70cfd00a985a0b81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58640 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/mediatek/mt8195: move timer enum variables to timer_v2.hRex-BC Chen
Some enum variables of timer v2 are the same between MT8195 and MT8186, so we move them to common timer_v2.h. TEST=emerge-cherry coreboot BUG=b:200134633 Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com> Change-Id: I89891a19e622aa24783025e73c38c4ffa43aa166 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58829 Reviewed-by: Rex-BC Chen <rex-bc.chen@mediatek.corp-partner.google.com> Reviewed-by: Hung-Te Lin <hungte@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03device/include: Fix potential build errorAlan Huang
Add include guard for usbc_mux.h BUG=none BRANCH=none TEST=Build Pass Signed-off-by: Alan Huang <alan-huang@quanta.corp-partner.google.com> Change-Id: I47988edee84d17f0a15cfda1ac6f0187326bd331 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58832 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-03tests/Makefile: Remove ./ prefix when running testsRaul E Rangel
If ran with obj=/absolute path, then tests were failing to execute because the recipe tried running `.//absolutepath/...run`. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I9c3638b1af7531dbe8e956dcbe168250a235ead4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2021-11-03mb/siemens/mc_ehl1: Adjust PCIe clock settings in devicetreeWerner Zeh
On mc_ehl1 there are three of the 6 PCIe clocks used to drive PCIe devices. None of the used clock output is dedicated to a special device (CLK0 drives several devices on the mainboard, CLK1 and CLK2 are connected to a PCIe switch). Therefore do not use a port mapping of the clocks to avoid a stopping clock once a device is missing and the matching root port is disabled. Instead set the mapping to 'PCIE_CLK_FREE' to have a free running clock. In addition, use the defined constant 'PCIE_CLK_NOTUSED' instead of the value 0xFF to disable the CLKREQ-feature and unused clocks. Change-Id: I2beea76ff8fefd79f476bef343d13495b45cdfcf Signed-off-by: Werner Zeh <werner.zeh@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58740 Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-03soc/mediatek/mt8195: add apusys init flowFlora Fu
Set up APU mbox's functional configuration registers. BUG=b:203145462 BRANCH=cherry TEST=boot cherry correctly Signed-off-by: Flora Fu <flora.fu@mediatek.com> Change-Id: I5053d5e1f1c2286c9dce280ff83e8b8611b573b9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58794 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/system76/oryp8: Add System76 Oryx Pro 8Jeremy Soller
https://tech-docs.system76.com/models/oryp8/README.html Tested with TianoCore (UeifPayloadPkg). Working: - PS/2 keyboard, touchpad - Both DIMM slots - Both M.2 SSD slots - All USB ports - Webcam - Ethernet - WiFi/Bluetooth - Integrated graphics using Intel GOP driver - Internal microphone - Internal speakers - Combined 3.5mm headphone & microphone jack - Combined 3.5mm microphone & S/PDIF jack* - S3 suspend/resume - Booting to Pop!_OS Linux 21.10 and Windows 10 20H2 - Flashing with flashrom Not working: - Discrete/Hybrid graphics Not tested: - Thunderbolt functionality - S/PDIF output Change-Id: Iabc8e273f997d7f5852ddec63e0c1bf0c9434acb Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/bonw14: Add System76 Bonobo Workstation 14Jeremy Soller
Change-Id: I55a827f8d6a5421c36f77049935630f4db4ba04d Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/49173 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/kbl-u: Add Galago Pro 2 as a variantJeremy Soller
Change-Id: Ia277b3ad50c9f821ab3e1dcb8327314ba955fa79 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52219 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/system76/kbl-u: Add Galago Pro 3 as a variantJeremy Soller
Change-Id: Ie203883cc9418585da4f9c7acd89e7624234caf1 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52218 Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02mb/system76/kbl-u: Add System76 Galago Pro 3 Rev BJeremy Soller
Change-Id: I25464d3a2dd02e613a8392db90b1eaf0f9b3ca70 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52217 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/gaze15: Add Gazelle 14 as a variantTim Crawford
Change-Id: Ib455951d1d26ddfa010d4eb579905235bd1385a9 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52295 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/gaze15: Convert to variant setupTim Crawford
Change-Id: I6d8a97d71ff3b4408f5e11230ed3ff00357f7123 Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58675 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/oryp6: Add Oryx Pro 7 as a variantJeremy Soller
Change-Id: Id00a45a6a6acf0880934c55f1a3f18e63f2aed43 Signed-off-by: Jeremy Soller <jeremy@system76.com> Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/52296 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02mb/system76/oryp6: Convert to variant setupTim Crawford
The Oryx Pro 6 has the same board layout as the next model in series, Oryx Pro 7. The primary difference between the two is the dGPU (20 series to 30 series). Convert oryp6 to a variant setup in preparation for adding the oryp7. Change-Id: I976750c7724d23b303d0012f2d83c21a459e5eed Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/57786 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2021-11-02util/crossgcc/Makefile: Clean up .PHONY definitionsPatrick Georgi
Order functionally: * first "all" and build-$tools * followed by clean * followed by the architecture targets The order was chosen this way because the architecture targets are the mostly likely to continue to grow. While at it, also fix the build_nasm mention (it was build-nasm) and add build_make. Change-Id: Id58338a512d44111b41503d4c14c08be50d51cde Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58796 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2021-11-02soc/intel/denverton_ns: Fetch addr bits at runtimeArthur Heymans
Change-Id: Ic46a7d56cbaf45724ebc2a1911f5096af2fe461a Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58687 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Mariusz Szafrański <mariuszx.szafranski@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2021-11-02Revert "mb/google/brya/var/kano: disabled autonomous GPIO power management"David Wu
This reverts commit 287cc02c007fd47b515d19389ea00ea0461fd5a1. Reason for revert: it will break s0ix. BUG=b:201266532 TEST=build pass Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Change-Id: I393077b26e2cdeae055d8eea1030754602e94ada Reviewed-on: https://review.coreboot.org/c/coreboot/+/58809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02include/device/pci_ids,soc/amd/common/block/lpc: drop duplicate PCI IDsFelix Held
PCI_DEVICE_ID_AMD_FAM17H_LPC and PCI_DEVICE_ID_AMD_FAM17H_SMBUS redefine the same values that are already defined by PCI_DEVICE_ID_AMD_CZ_LPC and PCI_DEVICE_ID_AMD_CZ_SMBUS, so drop PCI_DEVICE_ID_AMD_FAM17H_LPC and PCI_DEVICE_ID_AMD_FAM17H_SMBUS. Also add some comments to the places in the code where the defines are used to clarify which ID is used on which hardware generation. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id0b3d7b5a886ccc76d82ada6be4145e85fd51ede Reviewed-on: https://review.coreboot.org/c/coreboot/+/58696 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Raul Rangel <rrangel@chromium.org>
2021-11-02mb/google/volteer: allow MKBP devices and disable TBMC deviceFrankChu
Enable MKBP (Matrix Keyboard Protocol) interface for all volteer family to use for buttons and switches. Disable TBMC (Tablet Mode Switch device), as it is not needed anymore. BUG=b:171365305 TEST=manual test on Volteer: Volume Up/Down and Power buttons, Tablet Mode switch Signed-off-by: FrankChu <frank_chu@pegatron.corp-partner.google.com> Change-Id: I2bb2e895af17fa4280113e57e2b0ca780af8840e Reviewed-on: https://review.coreboot.org/c/coreboot/+/58741 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Boris Mittelberg <bmbm@google.com> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/intel/adlrvp: Configure EC in RW GPIOAnil Kumar
EC_IN_RW signal from EC GPIO is connected to GPIO E7 of SOC. This GPIO can be used to check EC status trusted (LOW: in RO) or untrusted (HIGH: in RW). Branch=none Bug=none Test=Issue manual recovery and confirm DUT is entering recovery mode on ADL-M RVP. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I20804db450ab0b3ebe19c51ba2b294a0137d81a7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/58099 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org>
2021-11-02mb/google/guybrush: Update STT coefficientsJason Glenesk
Update guybrush STT (Skin Temperature Tracking) configuration settings to values provided by power team after tuning. BUG=b:203123658 Change-Id: I14c69dbe044e4f3f2711be96e5ea80db0686b3eb Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58674 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Rob Barnes <robbarnes@google.com>
2021-11-02mb/system76/*: CMOS: Drop power_on_after_fail optionTim Crawford
Our boards do not boot if power_on_after_fail=Disable. Drop the option and use the default of powering on. Change-Id: Ia1857e52f838337048f79f8ca5c12d669cae321a Signed-off-by: Tim Crawford <tcrawford@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/58673 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jeremy Soller <jeremy@system76.com>
2021-11-02soc/amd/common/block/cpu: Add support for cbfs_cache regionRaul E Rangel
This change adds the cbfs_cache region into the x86 memlayout. The SoC or mainboard can decide how big the region should be by specifying CBFS_CACHE_SIZE. BUG=b:179699789 TEST=Build guybrush and verify cbfs_cache region wasn't added. Signed-off-by: Raul E Rangel <rrangel@chromium.org> Change-Id: I268b6bc10906932ee94f795684a28cfac247a68c Reviewed-on: https://review.coreboot.org/c/coreboot/+/56578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-02 03:37:29 +0000