summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-02mb/google/rex/var/ovis: Enable LAN1Subrata Banik
This patch performs below operations to enable LAN1. - Add overridetree.cb entry to configure the LAN device. - Complete the LAN1/SD PEREST power sequencing BUG=b:289395519 TEST=Able to boot google/ovis with LAN1 being enabled. Change-Id: Ifb67cb8e6fc03e3ff14b1b3d8382322fd0b3aeff Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76212 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Configure GPP_V12 PADSubrata Banik
This patch configures GPP_V12 aka SOC_SLP_LAN_L properly as per the Ovis schematics dated June'23 to ensure LAN port is not in sleep. BUG=b:289395519 TEST=Able to measure SLP_LAN PIN and confirm it's deasserted. Change-Id: I1fe8715862823149c8a1f05e3e4463a615fbbbce Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76211 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-07-02mb/google/rex/var/ovis: Configure GPP_C10 PADSubrata Banik
This patch configures GPP_C10 aka EN_LAN_RAILS properly as per the Ovis schematics dated June'23 to ensure LAN ports having power. BUG=b:289395519 TEST=Able to measure LAN port power is enabled with this CL. Change-Id: I3f4d611313325dba66905e0c8ef391765a1fe7a7 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76210 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-07-02util/docker/coreboot-sdk: Drop legacy libftdi packageFelix Singer
flashrom does not support libftdi 0.20 anymore and it's not used by anything else. Its build systems (Makefile and Meson) only reference libftdi1 and it still compiles fine without the legacy package. Thus, drop it from the package list. Change-Id: If1b575bc9abfd192e93811a83d8615bed61eba0c Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76084 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-07-02util/docker/coreboot-sdk: Drop legacy libusb packageFelix Singer
flashrom does not support libusb 0.1 anymore and it's not used by anything else. Its build systems (Makefile and Meson) only reference libusb1 and it still compiles fine without the legacy package. Thus, drop it from the package list. Change-Id: Ib9b7530e5b707e12fbf3f8058999456dc1f8dff4 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76083 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Thomas Heijligen <src@posteo.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
2023-07-02crossgcc: Upgrade IASL from 20230331 to 20230628Elyes Haouas
Changes: https://acpica.org/node/204 Change-Id: I4a1be7ffa6cb363d3fe0cddc59f0f4283fcc5257 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76164 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-30mb/google/dedede/var/taranza: Disable EXT_VRSheng-Liang Pan
The taranza removed the APW8738BQBI and "disable_external_bypass_vr" should be set to "1" to disable. BUG=b:288978340 TEST=emerge-dedede coreboot Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Change-Id: I0a849fbfacba1d200c969c66bb058863d7ab3085 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76125 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-30mb/google/rex/var/ovis: Fix mux change as per schematicsSubrata Banik
This patch updates the mux connection to reflect the Ovis schematics dated June to ensure Type-C1 is able to work in DP-ALT mode. BUG=b:289300284 TEST=Able to get display over Type-C1 port. Change-Id: I223eb3a96e6a1b3abb4168fcf59c0df04c1b4498 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76149 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-29acpi: Set checksum for SPCR tableNico Huber
This was missed recently when adding the table. Linux complains about the missing checksum, e.g. [ 0.186070] ACPI BIOS Warning (bug): Incorrect checksum in table [SPCR] - 0x00, should be 0x87 (20210730/tbprint-173) Tested with QEMU/Q35, albeit with changes to the special handling for ACPI with QEMU. The warning goes away. Change-Id: I0086a3e8c5b3a06da9edf40a7a288c534fc5a6b2 Signed-off-by: Nico Huber <nico.h@gmx.de> Fixes: commit 90464073e4a1 (acpi: Add SPCR table) Reviewed-on: https://review.coreboot.org/c/coreboot/+/76158 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29soc/amd/phoenix/Kconfig: Drop TODO for FSP_DMI_TABLESKonrad Adamczyk
BUG=b:288520486 TEST=In kernel, dump `dmidecode -t 17`. Change-Id: I1a8aae12ec449fe921814a6e363306fced969367 Signed-off-by: Konrad Adamczyk <konrada@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76109 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-29soc/amd/common/fsp: Fix dimm_num assignmentKonrad Adamczyk
The dimm_num shall be dimm, not channel. BUG=b:288520486 TEST=In kernel, see output from `dmidecode -t 17`. Observe that Locator reflects proper location of the module. Change-Id: Id876a5c245ed1a145c930b3456830d7b42780b74 Signed-off-by: Konrad Adamczyk <konrada@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76108 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-06-29soc/intel/meteorlake: remove unused tcss mailbox codeKane Chen
In mtl, there is no MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE So, this patch removes unused code related to MAILBOX_BIOS_CMD_TCSS_DEVEN_INTERFACE ADL also removes this code, see cl:62861 BUG=b:288976547 TEST=Tested on Screebo and DP/USB are working as expected after suspend/resume Change-Id: I5a4b26c38ec3f5fe1d81fd70f8c2196d0e5b84c3 Signed-off-by: Kane Chen <kane.chen@intel.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76126 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/nissa/var/gothrax: Add GPIO table for gothraxYunlong Jia
Configure GPIOs according to schematics. BUG=b:287563817 BRANCH=None TEST=emerge-nissa coreboot Signed-off-by: Yunlong Jia <yunlong.jia@ecs.corp-partner.google.com> Change-Id: If852c7a30edb9fb778872414cb15dc3446aebc55 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75872 Reviewed-by: Henry Sun <henrysun@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-29soc/intel/meteorlake: Add QS(C0) stepping CPU IDMusse Abdullahi
This patch adds CPU ID for C0 stepping (aka QS). DOC=#723567 TEST=Able to boot on C0 rvp (and rex) and get correct CPU Name in coreboot log. Change-Id: I53e3b197f2a0090e178877c1eef783b41670ca83 Signed-off-by: Musse Abdullahi <musse.abdullahi@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76135 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/dedede/var/dibbi: Update power limitsChia-Ling Hou
Add ramstage.c in Makefile.inc and update Dibbi power limits in Dibbi ramstage.c. BUG=b:281479111 TEST=emerge-dedede coreboot and check psys and PLx value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ieaff856b762b546f3e99acb7ba2ce15791193da6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75681 Reviewed-by: Reka Norman <rekanorman@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-29mb/google/dedede: Support variant specific power limitsChia-Ling Hou
With newer dedede design, it's required to config corresponding psyspmax, psyspl1, psyspl2, pl1 and pl2 by different kinds of adapter. BUG=b:281479111 TEST=emerge-dedede coreboot and check correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: I583c930379233322c41027805369f81d02000ee7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75680 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-06-28intelblocks/pep: Send All Monitor Off/On command only in FWCM caseUsha P
ALL_MONITOR_OFF command is sent using DPOF. TBT controller needs to be notified about ALL_MONITOR_OFF(TBT Displays OFF) only when Firmware Connection Manager(FWCM) is in use during S0ix Entry/Exit. When configured for SWCM this command should not be sent. BUG=b:288536417 TEST= Build and boot Rex Proto-1. Verify S0ix working. Signed-off-by: Usha P <usha.p@intel.com> Change-Id: I110fb971846f110e7d93a524ceda3bf4bfc15c13 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75717 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Utkarsh H Patel <utkarsh.h.patel@intel.corp-partner.google.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-28mb/google/skyrim/var/winterhold: Set system_configuration to 3 to avoid SMU callJason Glenesk
Update system_configuration to 3 for 15W. Specification "FT6 Infrastructure Roadmap #57316" incorrectly lists system config index of 4 for 15W. Setting to 4 will cause an additional call to the SMU that is not needed and will add boot delay. Both SMU and FSP interpret configs > 3 as 3. BUG=b:267294958 TEST=Confirm extra message "Service Request 0x5F" not in log. Change-Id: Ib12c73f95030625b52e26f86e932ee2aaa6ea522 Signed-off-by: Jason Glenesk <jason.glenesk@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76096 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com>
2023-06-28mb/google/skyrim/: Set system_configuration to 3 to avoid SMU callJason Glenesk
Update system_configuration to 3 for 15W. Specification "FT6 Infrastructure Roadmap #57316" incorrectly lists system config index of 4 for 15W. Setting to 4 will cause an additional call to the SMU that is not needed and will add boot delay. Both SMU and FSP interpret configs > 3 as 3. BUG=b:267294958 TEST=Confirm extra message "Service Request 0x5F" not in log. Change-Id: I1f3e305c48801b4e499de56d06c0dcd3eeacc626 Signed-off-by: Jason Glenesk <jason.glenesk@amd.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76091 Reviewed-by: Marshall Dawson <marshalldawson3rd@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-06-28nb/intel/pineview: Drop unused attributes from sysinfo structElyes Haouas
Change-Id: Iab582458a7dd87e10bf14fd34f15c592b600f706 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76098 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-28mb/google/rex/var/ovis: Enable crashlog and IOE dieJakub Czapiga
BUG=b:262501347 TEST=Boot on Ovis board. Change-Id: I43aac857e3ec7989c9ab5201cd8f24a7c877e76b Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76151 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-28mb/google/rex: Avoid boot hang due to missing SOC/IOE SRAM deviceSubrata Banik
The SOC/IOE SRAM device is used to store crash logs. Previously, the crashlog enablement was hardcoded in the baseboard.common module. This commit moves the crashlog enablement logic to the baseboard module, so that it can be enabled or disabled based on the specific baseboard. Additionally, the SOC/IOE SRAM is now enabled by default in the baseboard devicetree.cb file. This prevents the system from hanging if the SOC/IOE SRAM device is not present. BUG=b:262501347 TEST=Able to build and boot google/screebo with this patch. w/o this patch: [ERROR]  SOC SRAM device not found! [ERROR]  IOE SRAM base not valid Change-Id: I02d581e5b62cfa114a3761a9704ad9f24dead8aa Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76134 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-28mb/google/rex/var/ovis: Enable SaGvSubrata Banik
This patch enables SaGv with fixed frequency and gears for Ovis. Restrict memory speed to 6400 MTS as per board design. BUG=b:282164577 TEST=Verified the settings on google/ovis using debug FSP logs Change-Id: Ia9703344a8ae9d2ba44a16c62afab820fd8e2177 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76138 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28mb/emulation: Enhance ROM_SIZEMaximilian Brune
Some payloads tend to need bigger space than what our current defaults allow. Linuxboot is a good example. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I7029ca3360d936b67ff9873fa13cf9cc60445e56 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-28mb/google/rex: Set TCC to 90°CSumeet Pawnikar
Set tcc_offset value to 20 in devicetree for Thermal Control Circuit (TCC) activation feature for rex variants. BUG=b:270664854 BRANCH=None TEST=Build FW and test on rex board Change-Id: I0567b6240fcb53f38158c381b700169475cf3795 Signed-off-by: Sumeet Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76110 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-28mb/google/dedede/var/pirika: Add new Codec ALC5650Daniel_Peng
1.Add Codec ALC5650 setings for drivers/i2c/generic 2.Add option value '3' to AUDIO_CODEC_SOURCE for SSFC BUG=b:284060672 BRANCH=master TEST=emerge-dedede coreboot chromeos-ec chromeos-bootimage Confirm the device is existed on system. Change-Id: I39703a950620c90aa3740b7313b7d32cc68eede4 Signed-off-by: Daniel_Peng <Daniel_Peng@pegatron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75918 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Daniel Peng <daniel_peng@pegatron.corp-partner.google.com>
2023-06-28mb/google/hades: Update SD controller from GL9750 to GL9755Eric Lai
Hades uses GL9755 not GL9750. Select the right driver for ASPM. BUG=b:283721798 TEST=check the coreboot log. GL9755: configure ASPM and LTR Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ia5b3b17d76f02d5114af24535f9a1eecc14358a3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76118 Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28payloads/Memtest86Plus: Update branch name from master to mainNicholas Chin
It seems like the default branch for coreboot's Memtest86+ fork was renamed from 'master' to 'main'. TEST: Memtest builds correctly when selecting 'Main' for the Memtest86+ version option. Change-Id: I269249518019f5d0d12c57f1c14012abca86b48b Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76100 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28payloads/filo: Update branch name from master to mainNicholas Chin
It seems like the default branch for FILO was renamed from 'master' to 'main'. TEST: FILO builds correctly when selecting 'HEAD' for the FILO version option. Change-Id: I6c355d757987551e850f9d24f6bfb14167cb8046 Signed-off-by: Nicholas Chin <nic.c3.14@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76101 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-28soc/amd/common/block/acpi/ivrs: fix missing IOAPIC[1] errorFelix Held
When probing the resource with the IOMMU_IOAPIC_IDX index, we need to use the PCI device 0 function 0 on the first bus in the domain for probing and not the domain device, since the resource isn't on the domain device, but on the northbridge device which is B0F0D0 in the case of the APUs. TEST=This fixes the following error on Mandolin with Picasso: AMD-Vi: [Firmware Bug]: : IOAPIC[1] not in IVRS table AMD-Vi: Disabling interrupt remapping Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id88f17d68ba5accef6561837478828bd3d24baa5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76117 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-28acpi: Add SPCR tableArthur Heymans
TESTED works on IO and MMIO console with linux using 'earlycon=' in the commandline argument. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I64e624c17a27b9215a8ba83bd6cbb2c0a7aa1dfc Reviewed-on: https://review.coreboot.org/c/coreboot/+/75685 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-28mb/bytedance: Add 2 SPR sockets server board bd_egsYiwei Tang
Bytedance bd_egs is a dual socket MB with Intel Sapphire Rapids Scalable Processor chipset. It's utilising: - 2 SPR sockets - Max 32 DIMMs - 33x CPU PCIe slots - AST2600 for VGA and BMC remote management Test: The board boots to Linux 5.10 with all 192 cores available. All PCIe devices and DIMMS are working. # sudo dmesg --level alert,crit,err,warn [ 46.636896] netlink: 'consul': attribute type 1 has an invalid length. Change-Id: I091bc78e39cd76b3c6b9a10a1fcf58e9d671ef5d Co-authored-by: Jinfeng Li <lijinfeng01@ieisystem.com> Co-authored-by: Long Cao <caolong01@inspur.com> Co-authored-by: Hao Wang <wanghao11@inspur.com> Co-authored-by: Chenyu Lan <lanchenyu@inspur.com> Co-authored-by: Lay Kong <lay.kong@intel.com> Co-authored-by: Kehong Chen <kehong.chen@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Dong Wei <weidong.wd@bytedance.com> Co-authored-by: Chenchen Li <lichenchen.carl@bytedance.com> Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com> Reviewed-by: Haitao Nie <niehaitao@bytedance.com> Reviewed-by: Shijian Ge <geshijian@bytedance.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75722 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-27mb/google/hades: select DUMP_SMBIOS_TYPE17Eric Lai
Hades uses DDR5 which can't read SPD from coreboot yet. Use smbios dump to print memory information. TEST=check the coreboot log. memory Channel-0-DIMM-0 type is DDR5 memory part number is MTC8C1084S1SC56BG1 memory max speed is 5600 MT/s memory speed is 5200 MT/s memory size is 16384 MiB Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Ica44081228a3a1edc36e2110e84686582fbe8f33 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76088 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com>
2023-06-27arch/x86/Kconfig: remove period from DUMP_SMBIOS_TYPE17 titleEric Lai
Option name strings should not end with a period, remove it. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: Id61d8961cad2cd311db7d9da3bdb86f0f28b57b4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76087 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-27util/docker/coreboot-sdk: Install GNAT meta package instead gnat-12Felix Singer
The versions of both GCC and GNAT need to be in sync and the meta package for GCC is already used. So use the meta package for GNAT as well. Change-Id: Ifcd6960731bc02c70a510e520b385ca300caf88f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76086 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-27soc/amd/block/ivrs: Add NULL check for IVRSNaresh Solanki
Add NULL check for ivrs pointer before use. Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: Ibeb0ea3bcaa3512a93500588ad4f11046edee61f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75506 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-06-26soc/amd/common/iommu.c: Make sure iommu is enabledArthur Heymans
Don't rely on vendorcode to set enable bit on IOMMU. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com> Change-Id: I1805a20656b7fb3915f8cc93c618ee074461840f Reviewed-on: https://review.coreboot.org/c/coreboot/+/75829 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-06-26util/docker/coreboot-sdk: Drop subversion packageFelix Singer
Subversion is not used anywhere (anymore?). Thus, drop it from the package list. Change-Id: Ibf8073c7878c130ff688102e850bbdcd66e3becc Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76082 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-26mainboard/google/rex: Enable crashlogPratikkumar Prajapati
Enable crashlog for rex. Select config options SOC_INTEL_CRASHLOG, and SOC_INTEL_IOE_DIE_SUPPORT. Also enable ioe_shared_sram and pmc_shared_sram devices. BUG=b:262501347 TEST=Able to trigger Crashlog, BERT table gets generated and decodes as expected. Change-Id: I3d3a9fb41d1293f021ad9de9b29c756cb7559373 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74770 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-26soc/intel/common: Print crashlog size info in hexPratikkumar Prajapati
Print crashlog size information in hex to be consistent with other prints. BUG=b:262501347 TEST=Values printed in hex. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: Ieb5498e702497bfbc2b4d5396d5b760a0010f5de Reviewed-on: https://review.coreboot.org/c/coreboot/+/75910 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/intel/meteorlake: Add support for crashlogPratikkumar Prajapati
Capture crashlog records from CPU PUNIT SRAM, SOC PMC SRAM and, IOE SRAM. Crashlog records for IOE SRAM is discovered by parsing SOC PMC SRAM records. BUG=b:262501347 TEST=Able to trigger Crashlog, BERT table gets generated and decodes as expected. Change-Id: Ib0abd697fba35edf1c03d2a3a325b7785b985cd5 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/74769 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-26mb/google/brya/var/vell: update FW_config to sync config.starShon Wang
We have found inconsistencies in turn of FW_CONFIG settings/definitions, so sync setting to vell config.star BUG=b:282189358 BRANCH=firmware-brya-14505.B TEST=emerge-brya coreboot Change-Id: I676b719ecc711a6f59e76465a3566bf63924d90f Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75913 Reviewed-by: YH Lin <yueherngl@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26mb/google/rex: Avoid LPDDR5/x hangSubrata Banik
This patch avoids random hang issue observed after booted to OS on LPDD5/x platforms due to CLK not tuned properly in SAGV point 0, 2133MT/s. As per Intel doc 769410 the expected work around is to change SAGV point 0 from 2133 G4 to 3200 G4. BUG=b:287170545 TEST=Able to perform 500 power cycles on google/rex without any hang. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I02a9cadc075f396549703d7a008382e76268f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76076 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26mb/qemu-aarch64: Move probing dram to read_resourcesArthur Heymans
While we are at it: - Don't use _kb version of declaring resources - Use cbmem_top instead of probing for memory again Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Iaaee41aec7806287ef1881372ec8ec47a4cd57d9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-06-26acpi/acpigen.c: Be explicit about char signArthur Heymans
The sign of 'char' is not standardized and with GCC is architecture dependent. This fixes warnings when compiling this file on arm64. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I53b99835b2ffec5d752fc531fd59e4715f61aced Reviewed-on: https://review.coreboot.org/c/coreboot/+/76006 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/amd/common/block/acpi/ivrs: zero-initialize ivhd_[range,entry]Felix Held
Zero-initialize the ivhd_range and ivhd_entry structs to make sure that the whole struct is in a defined state. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iccacc89bfc497449ad0716a3436949505b65f748 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76079 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26soc/amd/common/block/acpi/ivrs: use size of instance instead of typeFelix Held
To determine the length parameter of memset, use sizeof with the instance as argument instead of the type. The behavior is the same, but it clarifies parameters in the memset call a bit. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I63674fbed7097a583cd77fa6e700652d6dcc5565 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76078 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-26soc/amd/common/block/acpi/ivrs: use memset on ivhd_[11,40]Felix Held
Assign the current address casted to acpi_ivrs_ivhd[11,40]_t pointer to *ivhd_[11,40] at the beginning of acpi_fill_ivrs[11,40] and then use memset on *ivhd_[11,40] to zero-initialize the structs. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I70b12fee99d6c71318189ac35e615589a4c8c629 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76077 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-26lib/smbios: Add a config string for BIOS Vendor in SMBIOS Type 0Hao Wang
BIOS Vendor in SMBIOS Type 0 would be who built the firmware so create a config string with default "coreboot" to make it changeable. Vendors could update it by adding a Kconfig in the site-local directory. Change-Id: I6dfcca338ffc48b150c966b9aefcefe928704d24 Signed-off-by: Yiwei Tang <tangyiwei.2022@bytedance.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75737 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-26soc/mediatek: Enable DRAM scramble on fast calibration flowXi Chen
No matter what DRAM calibration is performed, DRAM scramble should be enabled as long as MEDIATEK_DRAM_SCRAMBLE is set to y. Currently, DRAM scramble is enabled only if full calibration is performed. Correct the behavior by adding DRAMC_CONFIG_SCRAMBLE to the header config in fast calibration flow. BUG=b:285474337 TEST=Check the scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I907bccd4e68e040179e1971db6bf7a57b88dec1b Reviewed-on: https://review.coreboot.org/c/coreboot/+/75818 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-25commonlib/post_codes.h: Fix POST_EXIT_PCI_SCAN_BUS descriptionlilacious
Description of POST_EXIT_PCI_SCAN_BUS indicates the opposite of what its name suggests. Secondly, POST_ENTER_PCI_SCAN_BUS and POST_EXIT_PCI_SCAN_BUS have identical comments, which appears to be a copy-paste issue. Change the description accordingly. Change-Id: Ifc920651255bacf033cac39f0208d817f9ee84fc Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76047 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-24util/crossgcc: Update LLVM from version 16.0.5 to 16.0.6Felix Singer
Change-Id: I68f776c676b1c3c5562e9209c68c7a840198e36f Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76080 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-06-24soc/intel/cannonlake/chip.h: Use boolean type where applicablelilacious
Change-Id: If9639bd1d0737f94931c28b0e12f214a5c1f87c0 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75959 Reviewed-by: Jonathon Hall <jonathon.hall@puri.sm> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-24soc/intel/skylake/chip.h: Use boolean type where applicableFelix Singer
Change-Id: Ic40917689092e8d897a3ba92ac767cdb3b595eb3 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75880 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23soc/amd/common/block/acpi/ivrs: zero-initialize ivhd_hpet structFelix Held
Zero-initialize the ivhd_hpet struct right at the beginning of the ivhd_describe_hpet function to make sure that the whole struct is in a defined state. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If4d3563c485eed4a7cb0526a62f7b6c80f763bfd Reviewed-on: https://review.coreboot.org/c/coreboot/+/76074 Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2023-06-23soc/amd/common/acpi/ivrs: add HID argument to ivhd_describe_f0_deviceFelix Held
Allow the caller to specify the HID that gets written to the ivrs_ivhd_f0_entry_t struct. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I830f1fbbd535b100c88997ece10142a5d553950f Reviewed-on: https://review.coreboot.org/c/coreboot/+/76073 Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-06-23soc/amd/common/block/acpi/ivrs: zero-initialize ivhd_f0 structFelix Held
Zero-initialize the ivhd_f0 struct right at the beginning of the ivhd_describe_f0_device function to make sure that the whole struct is in a defined state. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6750b58dacb9b9192ed21128eb6e3a4495b96d0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76072 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Jason Glenesk <jason.glenesk@gmail.com>
2023-06-23soc/amd/common/block/acpi/ivrs: conditionally generate eMMC entryFelix Held
The eMMC entry in the IVRS table should only be generated if an eMMC controller is present in the SoC. Where the PCI_DEVFN(0x13, 1) is from is currently unclear to me. There is no PCI device 0x13 on bus 0 and the eMMC controller is also an MMIO device and not a PCI device, but this is what the reference code does. My guess would be that it mainly needs to be a unique PCI device that won't collide with any existing PCI device in the SoC. Add a comment about this too. TEST=None Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I00865cb7caf82547e89eb5e77817e3d8ca5d35dd Reviewed-on: https://review.coreboot.org/c/coreboot/+/75933 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-23Makefile.inc: don't add fmap_config.h dependency twiceFelix Held
Commit d054bbd4f1ba ("Makefile.inc: fix multiple jobs build issue") added a dependency on $(obj)/fmap_config.h to all .c source files in all stages, so it's not needed any more to add it as a dependency to files that include fmap_config.h. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b62917f32ae9f51f079b243a606e5db07ca9099 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76002 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Martin Roth <martin.roth@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com>
2023-06-23soc/intel/jasperlake: Add per-SKU power limitsChia-Ling Hou
Add JSL SKUs ID and add PLx from JSL PDG in project devicetree. BUG=b:281479111 TEST=emerge-dedede coreboot and read correct value on dibbi Signed-off-by: Chia-Ling Hou <chia-ling.hou@intel.com> Change-Id: Ic086e32a2692f4f5f9b661585b216fa207fc56fd Reviewed-on: https://review.coreboot.org/c/coreboot/+/75679 Reviewed-by: Super Ni <super.ni@intel.corp-partner.google.com> Reviewed-by: Super Ni <super.ni@intel.com> Reviewed-by: Michał Żygowski <michal.zygowski@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com>
2023-06-23mb/google/rex: Configure ISH GPIO's based on FW_CONFIGBernardo Perez Priego
Configures ISH related GPIO's based on FW_CONFIG obtained from CBI. BUG=b:280329972,b:283023296 TEST= Set bit 21 of FW_CONFIG with CBI Boot rex board Check that ISH is enabled, loaded, and functional Signed-off-by: Bernardo Perez Priego <bernardo.perez.priego@intel.com> Change-Id: I3f0f9a7c8318fa9ae59b6f613eafdacbfa07c749 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75525 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23commonlib/console/post_code.h: Change post code prefix to POSTCODElilacious
The prefix POSTCODE makes it clear that the macro is a post code. Hence, replace related macros starting with POST to POSTCODE and also replace every instance the macros are invoked with the new name. The files was changed by running the following bash script from the top level directory. sed -i'' '30,${s/#define POST/#define POSTCODE/g;}' \ src/commonlib/include/commonlib/console/post_codes.h; myArray=`grep -e "^#define POSTCODE_" \ src/commonlib/include/commonlib/console/post_codes.h | \ grep -v "POST_CODES_H" | tr '\t' ' ' | cut -d ' ' -f 2`; for str in ${myArray[@]}; do splitstr=`echo $str | cut -d '_' -f2-` grep -r POST_$splitstr src | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; grep -r "POST_$splitstr" util/cbfstool | \ cut -d ':' -f 1 | xargs sed -i'' -e "s/POST_$splitstr/$str/g"; done Change-Id: I25db79fa15f032c08678f66d86c10c928b7de9b8 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76043 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-23soc/intel/meteorlake: Rename shared SRAM aliasesPratikkumar Prajapati
Rename shared SRAM aliases for IOE and PMC to make them more readable. pci device 13.3 is IOE shared sram, renamed to ioe_shared_sram. pci device 14.2 is PMC shared sram, renamed to pmc_shared_sram. Rename them in SOC code as well as mainboard to make sure the patch builds for the relevant boards. BUG=b:262501347 TEST=Able to build. Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Change-Id: I02a8cacc075f396549703d7a008382e76258f865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75999 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23mb/google/rex: Keep CNVi PCI device enabled for OvisSubrata Banik
The CNVi PCI device is required for the system to boot properly. By ensuring that this device is enabled, we can prevent the below error message from appearing and ensure that the system boots successfully. BUG=b:274421383 TEST=Able to build and boot google/ovis without any error. w/o this patch: [ERROR] CNVi WiFi is enabled without CNVi being enabled [ERROR] CNVi BT is enabled without CNVi being enabled Change-Id: I4dbae14f0cfccf96a33437a0e2fdefb508209354 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76001 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-06-23soc/intel/common/block/cse: Retrieve CSE RW FW version conditionallySubrata Banik
This patch introduces a newer config to store the CSE RW FW version into the CBMEM. Prior to that CSE RW FW version was fetched unconditionally and ended up increasing the boot time by 7ms to 20ms depending on the SoC arch (including CSE arch). The way to retrieve the CSE firmware version is by sending the HECI command to read the CSE Boot Partition (BP) info. The cost of sending HECI command to read the CSE FW version is between 7ms-20ms (depending on the SoC architecture) hence,ensure this feature is platform specific and only enabled for the platformthat would like to store the CSE version into the CBMEM. TEST=Build and boot google/rex to avoid getting CSE RW FW version to save 18ms of the boot time. w/o this patch:   10:start of ramstage                            722,215 (43)   17:starting LZ4 decompress (ignore for x86)     741,415 (19,200) w/ this patch:   10:start of ramstage                            722,257 (43)   17:starting LZ4 decompress (ignore for x86)     723,777 (1,520) Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I94f9f0f99706724c7d7e05668390f3deb603bd32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75998 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Dinesh Gehlot <digehlot@google.com>
2023-06-23mb/msi/ms7d25/vboot-rwab.fmd: Add 32KiB HSPHY cache regionMichał Żygowski
Add the HSPHY region required by INCLUDE_HSPHY_IN_FMAP option. It is needed in case CSME/HECI is disabled or not visible to keep the PCIe 5.0 root ports functional. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ic4793fc9457f58e914ef3e18cce1294f230462bd Reviewed-on: https://review.coreboot.org/c/coreboot/+/68988 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23soc/intel/alderlake/hsphy: Add possibility to cache HSPHY in flashMichał Żygowski
The patch adds a possibility to cache the PCIe 5.0 HSPHY firmware in the SPI flash. New flashmap region is created for that purpose. The goal of caching is to reduce the dependency on CSME and the HECI IP LOAD command which may fail when the CSME is disabled, e.g. soft disabled by HECI command or HAP disabled. This change allows to keep PCIe 5.0 root ports functioning even if CSME/HECI is not functional. TEST=Boot Ubuntu 22.04 on MSI PRO Z690-A and notice PCIe 5.0 port is functional after loading the HSPHY from cache. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I5a37f5b06706ff30d92f60f1bf5dc900edbde96f Reviewed-on: https://review.coreboot.org/c/coreboot/+/68987 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23util/qemu: Add config for AArch64Nico Huber
Most arguments taken from the Kconfig help. RAM needs to be >= 531M, as coreboot is linked to reside between 512M..531M. Tested `make qemu` with QEMU 7.2.0. Change-Id: Id7f23918a786bc126188d5caf285e9f532dbb0ed Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76042 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-23allocator_v4: Fix top-level allocations w/o IORESOURCE_ABOVE_4GNico Huber
When moving the code to allocate at the top level in commit 9260ea60bfa4 (allocator_v4: Use memranges only for toplevel), a call to restrict the limit of the resource was dropped. Probably by accident in one of the earliest rebases. Without this call to effective_limit(), 64-bit resour- ces at the top level, i.e. PCI bus 0, were always placed above 4G. Even when this was not requested with the IORESOURCE_ABOVE_4G flag. Tested on kontron/ktqm77 where the issue could be reproduced with x86_64. Without the fix, boot hangs when trying to access the GMA MMIO registers of PCI 00:02.0, which were placed above 4G. Change-Id: Ied3a0695ef5e91f092bf2d442c1c482057643483 Signed-off-by: Nico Huber <nico.h@gmx.de> Found-by: 9elements QA Reviewed-on: https://review.coreboot.org/c/coreboot/+/76090 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23{commonlib/drivers}: Have option to store MRC version inside CBMEMSubrata Banik
This patch introduces CBMEM ID to store the MRC version (similar to existing implementation that stores the FSP-M version inside CBMEM ID) inside cbmem so the version information is available across the different coreboot stages. For example: * romstage: Use the CBMEM ID version information to check if the MRC cache is valid and need to erase the MRC cache * ramstage: Use the CBMEM ID to store the MRC cache into the non-volatile space. BUG=b:261689642 TEST=Able to build and boot google/rex and dump the MRC version as below. cbmem --list CBMEM table of contents: NAME ID START LENGTH ... 21. MRC VERSION 5f43524d 75ffeb60 00000004 ... localhost ~ # cbmem -r 5f43524d | hexdump 00000000 01 12 07 00 Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I91f735239b33c6f8ba41c076048903e4b213c6a2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75921 Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Tarun Tuli <taruntuli@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-23driver/intel/fsp2_0: Add support to store MRC cache using MRC versionSubrata Banik
This patch uses the "generic" variable name as "version" while storing the MRC cache data instead referring to the FSP-M version or MRC version. Hence, updated all the instances of `fsp_version/fspm_version` with `version`. Also introduces the new option to the MRC cache version that allows SoC users to store the MRC cache version based on the supported EDK2 version. Intel FSP built with EDK2 version 202302 onwards has support to retrieve the MRC version by directly parsing the binary. Additionally, added the helper function `fsp_mrc_version()` and corresponding header file to read the MRC version from the FSP binary. BUG=b:261689642 TEST=Able to build and boot google/rex and google/omnigul. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: Ia8af53aed674ad4a3b426264706264df91d9c6b0 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75920 Reviewed-by: Tarun Tuli <taruntuli@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-06-22arch/x86,lib: Migrate SMBIOS implementation to common codeBenjamin Doron
SMBIOS is not specific to architecture, and this is mostly a generic implementation. Therefore, move it to common code, having architecture-specific code define some functions to fill this data. Change-Id: I030c853f83f8427da4a4c661b82a6487938b24e6 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75886 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-06-22soc/amd/common/psp_verstage: move post codes to own headerlilacious
In order to clean up the post code macros, move them to a separate header away from unrelated code. The new header file is included in the file where the post codes are moved out of, so that the current state remains unchanged. Change-Id: I28a932ce071488e90000e1bbd30b4d739a4bae43 Signed-off-by: lilacious <yuchenhe126@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75809 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-22mb/qemu/aarch64: Add PCI supportArthur Heymans
Run with "-device pci-bridge,chassis_nr=1" argument to add a bridge and see that it gets found and picked up by the resource allocator. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Iad5d87731066a4009d2c4930a01bc15543d9447a Reviewed-on: https://review.coreboot.org/c/coreboot/+/75925 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-22allocator_v4: Remove redundant parameterNico Huber
update_bridge_resource() already gets the type passed as part of the resource. Change-Id: I6b3c9809caecdd1bad5b98891a00c3392190a3e0 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/67022 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2023-06-22allocator_v4: Manually inline some thin functionsNico Huber
Inline functions that are only called once to improve readability. The calling functions still have rather short bodies, and the reader won't have to look down yet another layer to understand what they are doing. Change-Id: Ib4aa5d61dfa88c804a1aaee028185e00c5fbb923 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-22allocator_v4: Factor resource printing outNico Huber
Factor all the resource printing out into separate functions. This results in one-liners in the actual program code which hopefully will distract less during reading. Change-Id: I766db379f3b62d641cb3c41ebe0394b60ba57f7a Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65421 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-22allocator_v4: Use memranges only for toplevelNico Huber
During phase 1 of the resource allocation we gather all the size requirements. Starting from the leafs of our devicetree, we cal- culate the requirements per bus, until we reach the resource do- main. However, because alignment plays a role, we can't just accumulate the sizes of all resources on a bus. Instead, we already sort all the resources per bus to predict their relative placement, inclu- ding alignment gaps. Then, phase 2 has to perform the final allo- cations with the exact same relative placement. This patch introduces a very simple mechanism to avoid repeating all the calculations: In phase 1, we note the relative `base` of each resource on a bus. And after we allocated all the resources directly below the domain in phase 2, we add the absolute `base` of bridge resources to the relative `base` of child resources. This saves most of the computational complexity in phase 2. How- ever, with a shallow devicetree with most devices directly below the domain, this won't have a measurable impact. Example after phase 1: domain | `-- bridge #0 | res #0, base 0x000000 (relative), | size 12M, align 8M | |-- device #0 | res #1, base 0x800000 (relative), | size 4M, align 4M | `-- bridge #1 | res #2, base 0x000000 (relative), | size 8M, align 8M | `-- device #1 res #3, base 0x000000 (relative), size 8M, align 8M After phase 2 allocation at the domain level (assuming res #0 got 0xa000000 assigned): domain | `-- bridge #0 | res #0, base 0xa000000 (absolute), | size 12M, align 8M | |-- device #0 | res #1, base 0x800000 (relative), | size 4M, align 4M | `-- bridge #1 | res #2, base 0x000000 (relative), | size 8M, align 8M | `-- device #1 res #3, base 0x000000 (relative), size 8M, align 8M Now, all we need to do is to add the `base` of bridge resources recursively. Starting with resources on the bus below bridge #0: domain | `-- bridge #0 | res #0, base 0xa000000 (absolute), | size 12M, align 8M | |-- device #0 | res #1, base 0xa800000 (absolute), | size 4M, align 4M | `-- bridge #1 | res #2, base 0xa000000 (absolute), | size 8M, align 8M | `-- device #1 res #3, base 0x000000 (relative), size 8M, align 8M And finally for resources on the bus below bridge #1: domain | `-- bridge #0 | res #0, base 0xa000000 (absolute), | size 12M, align 8M | |-- device #0 | res #1, base 0xa800000 (absolute), | size 4M, align 4M | `-- bridge #1 | res #2, base 0xa000000 (absolute), | size 8M, align 8M | `-- device #1 res #3, base 0xa000000 (absolute), size 8M, align 8M Change-Id: I70c700318a85f6760f27597730bc9c9a86dbe6b3 Signed-off-by: Nico Huber <nico.h@gmx.de> Reviewed-on: https://review.coreboot.org/c/coreboot/+/65420 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-06-22allocator_v4: Treat above 4G resources more nativelyNico Huber
We currently have two competing mechanisms to limit the placement of resources: 1. the explicit `.limit` field of a resource, and 2. the IORESOURCE_ABOVE_4G flag. This makes the resource allocator unnecessarily complex. Ideally, we would always reduce the `.limit` field if we want to "pin" a specific resource below 4G. However, as that's not done across the tree yet, we will use the _absence_ of the IORESOURCE_ABOVE_4G flag as a hint to implicitly lower the `limit` of a resource. In this patch, this is done inside the effective_limit() function that hides the flag from the rest of the allocator. To automatically place resources above 4G if their limit allows it, we have to allocate from top down. Hence, we disable the prompt for RESOURCE_ALLOCATION_TOP_DOWN and turn it on by default. Platforms that are incompatible should be fixed, but can also override the default as a temporary measure. One implication of the changes is that we act differently when a cold-plugged device reports a prefetchable resource with 32-bit limit. Before this change, we would fail to allocate the resource. After this change, it forces everything on the same root port below the 4G line. A possible solution to get completely rid of the IORESOURCE_ABOVE_4G flag would be rules to place resources of certain devices below 4G. For instance, the primary VGA device and storage and HID devices could be made available to a payload that can only address 32 bits. For now, effective_limit() provides us enough abstraction as if the `limit` would be the only variable to consider. With this, we get rid of all the special handling of above 4G resources during phase 2 of the allocator. Which saves us about 20% of the code :D An earlier version of this change (commit 117e43611548) had to be reverted because of missing resource reservations in platform code. This is worked around now with commit ae81497cb6c7 (device/pci: Limit default domain memory window). Change-Id: Ia822f0ce648c7f7afc801d9cb00b6459fe7cebea Signed-off-by: Nico Huber <nico.h@gmx.de> Original-reviewed-on: https://review.coreboot.org/c/coreboot/+/65413 Original-reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Original-reviewed-by: Tim Wawrzynczak <twawrzynczak@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75012 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-06-22mb/google/brya/acpi: Set polling timing for DL23 and LD23 to 2msTarun Tuli
Reducing the polling time from 16ms to 2ms. Experimentally we have determined that the link state normally takes approximately 3.5ms to update and therefore we were waiting longer than necessary. TEST=build and confirm we are not waiting the extended period. Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I8fabb5ac46cae5c92d5b6f1dc0641a4d121c61dc Reviewed-on: https://review.coreboot.org/c/coreboot/+/76052 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-22mb/google/brya/acpi: Set power down delay to 2ms after PEXVDDTarun Tuli
Reduce the delay between PEXVDD and NVVDD from 3ms to 2ms during power down sequences. The hardware discharge is aggressive enough that we can safely optimize this. BUG=b:288267305 TEST=build and measured delay is acceptable Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: I7c65301414044487e50bbbca618c4e602e571cfb Reviewed-on: https://review.coreboot.org/c/coreboot/+/76051 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-22mb/google/brya/acpi: Don't wait for PG in GPU off sequencesTarun Tuli
When powering rails down, there is no value in waiting for the PG signal to de-assert. Instead, shut the rails off as quickly as possible while maintaining a controlled ordering. BUG=b:288266850 TEST=build and measured delays are gone Signed-off-by: Tarun Tuli <taruntuli@google.com> Change-Id: If31691a7d62b72661fcbacb34e90f3a6adec8134 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76050 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-22mb/google/rex: Disable TCSS config for pre-boot displayKapil Porwal
Pre-boot display is not POR for google/rex hence disable the config ENABLE_TCSS_DISPLAY_DETECTION. BUG=b:247670186 TEST=Build and boot to google/rex and make sure that display over TCSS works in the OS Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: Ib55e251a4620c7a375ee2f27763154c39207236e Reviewed-on: https://review.coreboot.org/c/coreboot/+/75927 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-22mb/google/nissa/var/joxer: Disable GPIOs for SD card readerTerry Chen
the board won’t have a SD card reader, so disable it. BUG=b:285477026 TEST=USE="project_joxer emerge-nissa coreboot" Change-Id: I6a55058b453771d264700a1364ef538f831148e4 Signed-off-by: Terry Chen <terry_chen@wistron.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75914 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Derek Huang <derekhuang@google.com>
2023-06-22vc/amd/fps/phoenix/platform_descriptors: drop logical-physical mappingFelix Held
For Phoenix the lane numbers in the DXIO descriptor match the ones in the schematic, so remove the corresponding text and the table from the comment on the fsp_dxio_descriptor struct. Since there's no logical to physical lane number remapping needed for the lanes in the Phoenix DXIO descriptors, drop the 'logical' from the start_logical_lane and end_logical_lane fields in the DXIO descriptor and rename those to start_lane and end_lane. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I94664fd9d3807370b73f9fae8645d444e5faf7b7 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74223 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-06-21mb/google/rex/var/screebo: set HBR smbus pin as NCSimon Zhou
Since GPP_C03/GPP_04 are floating in HW design, we set HBR smbus pin as NC, in case it prevents ese and cse from entering suspend. BUG=b:283053968 TEST=Verified on screebo non-TBT SKU, suspend and resume works. Change-Id: I401db32f0286de61ce3ab6c61de9528ec76cb51d Signed-off-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75643 Reviewed-by: Kun Liu <liukun11@huaqin.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21soc/mediatek: Add a prompt string for MEDIATEK_DRAM_SCRAMBLEXi Chen
Make the default MEDIATEK_DRAM_SCRAMBLE value overridable by adding a prompt string. BUG=b:285474337 TEST=build pass and check scramble feature is disabled on serial build Signed-off-by: Xi Chen <xixi.chen@mediatek.corp-partner.google.com> Change-Id: I703ac9aa3ccc4dd9d0fef9949c6b0d49449971a4 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75815 Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21mb/intel/adlrvp_rpl: Add initial code for adlrvp_rpl variantHarsha B R
This patch adds the initial code for adlrvp_rpl variant board which includes 1. Add overridetree.cb to corresponding variant directory 2. Update mainboard name in Kconfig and Kconfig.name 3. Add config option to select corresponding overridetree.cb BUG=b:286030718 BRANCH=firmware-brya-14505.B TEST=Able to build with the patch and boot the adlrvp_rpl platform to ChromeOS on Windows SKU. Signed-off-by: Harsha B R <harsha.b.r@intel.com> Change-Id: Ifb95ff705189863d23894769ff450f9528e73b14 Reviewed-on: https://review.coreboot.org/c/coreboot/+/73962 Reviewed-by: Usha P <usha.p@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sridhar Siricilla <sridhar.siricilla@intel.com>
2023-06-21mb/google/rex: Fix PLD for USB type-A portKapil Porwal
USB type-A port with same PLD.token information as USB type-C port, causes conflict while generating ACPI code for the EC CONN device. Use a different PLD.token number for type-A port to fix the issue. BUG=b:286328285 TEST=check ACPI can have right USB port in EC CON. before patch: Package (0x02) { "usb2-port", \_SB.PCI0.XHCI.RHUB.HS01 }, Package (0x02) { "usb3-port", \_SB.PCI0.TXHC.RHUB.SS01 }, after patch: Package (0x02) { "usb2-port", \_SB.PCI0.XHCI.RHUB.HS01 }, Package (0x02) { "usb3-port", \_SB.PCI0.TXHC.RHUB.SS03 }, Signed-off-by: Kapil Porwal <kapilporwal@google.com> Change-Id: If3e76c11dd6808eee4c9c2f3f71604a60379b5a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75911 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-21mb/google/rex/var/ovis: Select SOC_INTEL_METEORLAKE_U_HJakub Czapiga
Ovis uses MTL-H. BUG=b:274421383 TEST=util/abuild/abuild -p none -t google/rex -x -a -b ovis TEST=cros build-packages --board ovis chromeos-bootimage Change-Id: I284c72b902490187d0b15e4fc81650af1cfa16d7 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75887 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-21meteorlake: Rename `SOC_INTEL_METEORLAKE_U_P` as per latest EDSSubrata Banik
This patch renames config `SOC_INTEL_METEORLAKE_U_P` to `SOC_INTEL_METEORLAKE_U_H` as per Intel Meteor Lake Processor EDS version 1.3.1 (doc number: 640228). With new branding, the MTL-U/H-Processor Line offered in a 1-chip platform that includes the Compute, SOC, GT, and IOE tile on the same package. Signed-off-by: Subrata Banik <subratabanik@google.com> Change-Id: I032be650bbfef0bf0ef86bb37417b1d854303501 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75931 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-06-20arch/x86: Introduce DUMP_SMBIOS_TYPE17 configEric Lai
DDR5 spd is not supported read by coreboot. But FSP can read it, so print the memory information from smbios type17 dimm information. TEST=check the coreboot log. memory Channel-0-DIMM-0 type is DDR5 memory part number is MTC8C1084S1SC56BG1 memory max speed is 5600 MT/s memory speed is 5200 MT/s memory size is 16384 MiB Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I2b5ca1f4a59598531a6cba500672c2717f2a7b00 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75756 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-20mb/intel/mtlrvp: disable acpi timer for xtal shutdownSukumar Ghorai
acpi timer needs to be disabled for xtal shutdown, requirement for platform to enter deepest sleep state (s0i2.2). BUG=b:274744845 TEST=Able to boot and verify S0ix is working w/o this cl: > iotools mmio_read32 0xfe0018fc 0x0 > iotools mmio_read32 0xfe4018fc 0x0 w/ this cl: > iotools mmio_read32 0xfe0018fc 0x2 > iotools mmio_read32 0xfe4018fc 0x2 Change-Id: Ib87b7555217b6954fca98f95b86d03016cd9b783 Signed-off-by: Sukumar Ghorai <sukumar.ghorai@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75898 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-20mb/google/hades: Update typeC usb PLDEric Lai
get_usb_port_references refer the PLD group. If the port assign cross ports like mux[0] use USB3 and mux[1] use USB1, then we need set USB3 to group 1. Update the PLD panel to back as well. BUG=b:286328285 TEST=check ACPI can have right USB port in EC CON. Signed-off-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Change-Id: I97517ecd4f8615af749fb6d007ded8e171796f7c Reviewed-on: https://review.coreboot.org/c/coreboot/+/75912 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-20MAINTAINERS: Add myself as METEORLAKE SOC and GOOGLE REX MB maintainerJakub Czapiga
Change-Id: If1fe1c4db1b825dac44aec01902f44c05582e69b Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75885 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-06-20treewide,intel/skylake: Use boolean type for s0ix_enable dt optionFelix Singer
Using the boolean type and the true/false macros give the reader a better understanding about the option. Thus, use the bool type for the attribute and use the macros for assignments. Skylake mainboards which use that option were changed by the following command ran from the root directory. socs="SOC_INTEL_(SKYLAKE|KABYLAKE|SKYLAKE_LGA1151_V2)" && \ option="s0ix_enable" && \ grep -Er "${socs}" src/mainboard | \ cut -d ':' -f 1 | \ awk -F '[/]' '{print $1"/"$2"/"$3"/"$4}' | \ xargs grep -r "${option}" | \ cut -d ':' -f 1 | \ xargs sed -i'' -e "s/${option}\".*\=.*\"1\"/${option}\" \= true/g" Change-Id: I372dfb65e6bbfc79c3f036ce34bc399875d5ff16 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75871 Reviewed-by: Arthur Heymans <arthur@aheymans.xyz> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com> Reviewed-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-06-20soc/amd/common/iommu: Use preprocessor values for IOMMU baseArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I85f58565bf1f955f704e223d538d0b374bc6fbda Reviewed-on: https://review.coreboot.org/c/coreboot/+/75915 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Fred Reitberger <reitbergerfred@gmail.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-06-20mb/google/rex/var/rex0: Configure I2C timing for I2C devicesIvy Jian
Configure I2C0/1/3/4 timing in devicetree to ensure I2C devices meet timing requirement. Note that I2C5 timing will be updated separately when the tuning done BUG=b:280559903 TEST=Build and check I2C devices timing meet spec. | | I2C0-Codec | I2C0-WFC | I2C1 | I2C3 | I2C4 | |-------------|------------|----------|--------|-------|---------| | FSMB(KHz) | 347 | 343.2 | 389.3 | 393.7 | 381.9 | | TLOW(us) | 2.1 | 2.093 | 1.895 | 1.902 | 1.953 | | THIGH(us) | 0.647 | 0.628 | 0.602 | 0.62 | 0.612 | | THD:STA(us) | 0.633 | 0.64 | 0.601 | 0.6 | 0.601 | | TSU:STA(us) | 0.617 | 0.621 | 0.619 | 0.659 | 0.61 | | TSU:STO(us) | 0.656 | 0.647 | 0.667 | 0.727 | 0.634 | | TBUF(us) | 86.15 | >14.088 | >9.833 | >8 | >10.366 | Signed-off-by: Ivy Jian <ivy.jian@quanta.corp-partner.google.com> Change-Id: I5421e4fe68e856bbe9f19544954a94670c895a47 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75150 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Tarun Tuli <taruntuli@google.com>
2023-06-20mb/google/rex/var/screebo: Remove rp2 and add rp1/rp3Rui Zhou
Remove rp2 and add rp1/rp3 for screebo BUG=b:286187816 BRANCH=none TEST=emerge-rex coreboot and verify TBT works. Change-Id: I1013d26c705f2a3f9378d944bd863d94f319d36c Signed-off-by: Rui Zhou <zhourui@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75832 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Simon Zhou <zhouguohui@huaqin.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-06-19device/resource_allocator_v4: Remove "ERROR: " from log messageElyes Haouas
It is no longer necessary to explicitly add "ERROR: " in front of BIOS_ERR message. Change-Id: I3ff2081d38f94556481efa02f242795bbfc77517 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/75876 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>