| Age | Commit message (Collapse) | Author |
|---|
|
nyan: Clock setup.
Reviewed-on: https://chromium-review.googlesource.com/172106
(cherry picked from commit 3697b6454c0aceebcf735436de90ba2441c9b7b1)
tegra124: Call into the mainboard bootblock init if one exists.
Reviewed-on: https://chromium-review.googlesource.com/172581
(cherry picked from commit 3a0cd48a0d1a9ce6b32ed614cd81fb81f5f82aec)
nyan: Add a mainboard specific bootblock.
Reviewed-on: https://chromium-review.googlesource.com/172582
(cherry picked from commit a83d065d660a26fe71ed79879c25f84a1b669f69)
nyan: tegra124: Redestribute the clock code between the mainboard and soc.
Reviewed-on: https://chromium-review.googlesource.com/172583
(cherry picked from commit ea703137fc37befa7d5a65afc982e298a0daca1b)
nyan: Initialize the i2c pins and controllers.
Reviewed-on: https://chromium-review.googlesource.com/172584
(cherry picked from commit 9c10a3074ef834688fea46c03551c2e3e54e44a8)
nyan: Initialize the PMIC.
Reviewed-on: https://chromium-review.googlesource.com/172585
(cherry picked from commit f6be8b0e607e05b73b5e4a84afcf04c879eee88a)
tegra124: add a chip.h and use it in NYAN
Reviewed-on: https://chromium-review.googlesource.com/172773
(cherry picked from commit 4dd5f1f091f2dcae5ce38203bb86c62994609f8f)
tegra: Reorder GPIO register accesses to avoid glitching
Reviewed-on: https://chromium-review.googlesource.com/172730
(cherry picked from commit 61bedbf0f839e19b284d21af2ad10f2ff15e17d5)
tegra: Turn GPIO wrappers into macros to make them easier to write
Reviewed-on: https://chromium-review.googlesource.com/172731
(cherry picked from commit 94550fdfa5a8005d2e6a313041de212ab7ac470c)
tegra: Change GPIO functions to allow variable arguments
Reviewed-on: https://chromium-review.googlesource.com/172916
(cherry picked from commit e95ccd984f718a04b6067ff6ad5049a2cd74466d)
tegra124: Implement starting up the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/172917
(cherry picked from commit 7c5169a197310e18a3df0f176c499669e3c2bda3)
tegra: Simplify the I2C constants.
Reviewed-on: https://chromium-review.googlesource.com/172953
(cherry picked from commit 130a07c86dfa5ba5ac4580f29db927c91f045c76)
tegra124: Fix SPI base addresses
Reviewed-on: https://chromium-review.googlesource.com/173322
(cherry picked from commit da808e46919ebd3b9f2377a5889f0d5f10b92357)
tegra124: Scrub the clock constants.
Reviewed-on: https://chromium-review.googlesource.com/172954
(cherry picked from commit 9305ff0696a6d556a97f928b8683770833a309a4)
tegra124: add DMA support
Reviewed-on: https://chromium-review.googlesource.com/172951
(cherry picked from commit 4d2a5a56b922ac37d2326d7b139697567aac37b8)
tegra124: add basic SPI driver
Reviewed-on: https://chromium-review.googlesource.com/172952
(cherry picked from commit 5f861f13c7fd2dd881f3cbd0f1b4d4a9994ce429)
tegra124: Add an assembly stub which is run first on the main CPUs.
Reviewed-on: https://chromium-review.googlesource.com/173541
(cherry picked from commit e142b9572a89f43fe984c4fc87e3203f380ff4de)
nyan: tegra124: Set up dynamic cbmem.
Reviewed-on: https://chromium-review.googlesource.com/173542
(cherry picked from commit b6e1a70103446abb5c3440f145617e6566879c6f)
tegra124: Add an soc.c which sets up the chip operations and memory resource.
Reviewed-on: https://chromium-review.googlesource.com/173543
(cherry picked from commit af49a5bd1f589cf053c4808510138aae26e20db4)
tegra124: extend chip.h to include video settings
Reviewed-on: https://chromium-review.googlesource.com/173600
(cherry picked from commit 87687633a2116f58fad7333b3b639cee9089ad29)
tegra124 and nyan: fill in the devicetree a bit more, add defines
Reviewed-on: https://chromium-review.googlesource.com/173684
(cherry picked from commit c107eaca3dea42be89f61690d0d6cb2181acb147)
tegra124: clean-ups for SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173599
(cherry picked from commit 1e2f9fd442ea336bf0663c3c8ea51f771e21beb7)
tegra124: add a #define for DMA alignment size
Reviewed-on: https://chromium-review.googlesource.com/173638
(cherry picked from commit f9dc2a8d8016fa7db974fb6cb01c3275e26832af)
tegra124: Add FIFO transmit functions to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173639
(cherry picked from commit 97e61f36ad96ce2f9b12a7ef765ee73d3f4285f7)
tegra124: clean-ups for DMA driver
Reviewed-on: https://chromium-review.googlesource.com/173598
(cherry picked from commit 750c0a5d6942748dd21f3a3f884ad94a561e86e0)
tegra124: early display and display code.
Reviewed-on: https://chromium-review.googlesource.com/173622
(cherry picked from commit 651c7ab96b1f136865e4673a120de7afc1218558)
tegra124: Move transfer size handling to spi_xfer()
Reviewed-on: https://chromium-review.googlesource.com/173680
(cherry picked from commit 4a9b7b47b3c09d70063ea843054ffef98f554621)
tegra124: strict error detection and reporting for SPI
Reviewed-on: https://chromium-review.googlesource.com/173681
(cherry picked from commit c056fa954e1dab40a56faec6c50385763a2eb010)
tegra124: add thread-friendly delays to SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173648
(cherry picked from commit c1a321c8f61942801627f895c5db74c518e2aa8e)
Tegra124: Take the SPI1 controller out of reset and enable its clock.
Reviewed-on: https://chromium-review.googlesource.com/173787
(cherry picked from commit c026a3fb861e157f1e17a121fc2ef70b903f36f2)
tegra124: add two more clock setting values
Reviewed-on: https://chromium-review.googlesource.com/173772
(cherry picked from commit 7d79d7dd9f0c1fd7127a7ba41652d809ccff7a57)
nyan: Set up the ChromeOS related GPIOs and SPI bus 1 which goes to the EC.
Reviewed-on: https://chromium-review.googlesource.com/173788
(cherry picked from commit ff172bfe30f75983a1e8efa2ead0a4519583d0a8)
tegra124: Add some stub functions to the Tegra SPI driver.
Reviewed-on: https://chromium-review.googlesource.com/173789
(cherry picked from commit 8bc527aa4afd301c046b0e844c7fa400630af0d2)
tegra124: Build source files into the various stges needed by CONFIG_CHROMEOS.
Reviewed-on: https://chromium-review.googlesource.com/173790
(cherry picked from commit 86a6423b668ca912295c47d8c6e3ef6c6f8c6084)
nyan: Implement the code which reads GPIOs for ChromeOS.
Reviewed-on: https://chromium-review.googlesource.com/173791
(cherry picked from commit 4c394dfbce762574fc79edcb6e4ac6bf346e48a3)
nyan: Enable the CHROMEOS and ChromeOS EC related kconfig options.
Reviewed-on: https://chromium-review.googlesource.com/173792
(cherry picked from commit 2845a4487159aa4b1dba58d977f52c449574fc8e)
Tegra124: SDMMC: Take the SDMMC 3 and 4 out of reset and ungate their clocks.
Reviewed-on: https://chromium-review.googlesource.com/173793
(cherry picked from commit c238b87bcd9d35afd828476d6ee88322ac5d0f88)
tegra124: fix clear_fifo_status() in SPI driver
Reviewed-on: https://chromium-review.googlesource.com/173738
(cherry picked from commit f415d2c0aaffc0f1a3592551a2db782d538f8f4f)
ARM: Include stdint.h in cpu.h.
Reviewed-on: https://chromium-review.googlesource.com/173774
(cherry picked from commit f1930faea3f14b2a2560a6c4058ef38532b6f1a6)
tegra124: When setting up the main CPU, set its CPSR appropriately.
Reviewed-on: https://chromium-review.googlesource.com/173775
(cherry picked from commit bc2ba9c15cfd22aeaca4f80b1d13a8b5e0178ead)
tegra124: fix wrong names in clk_rst.h
Reviewed-on: https://chromium-review.googlesource.com/173955
(cherry picked from commit 19dd9c85e4a3d1f77b23828bcbdd4bd8c2688b8d)
tegra124: Fix up the PLLX divider table.
Reviewed-on: https://chromium-review.googlesource.com/173778
(cherry picked from commit 3362cf3a7d6f5eaec879dda42323345922f6df17)
tegra124: clock: Get rid of cpcon and dccon.
Reviewed-on: https://chromium-review.googlesource.com/173779
(cherry picked from commit 08626ffac4a7e9ea3d4738af87e9e4cced7be2c7)
Tegra124: SPI: Set and unset CS in spi_claim_bus and spi_release_bus.
Reviewed-on: https://chromium-review.googlesource.com/173953
(cherry picked from commit a2df8f3a9c9c54c62d6ff37d3baff1d30ee6d355)
armv7: expose dcache_line_bytes() in cache API
Reviewed-on: https://chromium-review.googlesource.com/173975
(cherry picked from commit 6727f65702c7668fcb33848b4113bc3d3cc04e12)
libpayload: expose dcache_line_bytes() in ARM cache API
Reviewed-on: https://chromium-review.googlesource.com/174099
(cherry picked from commit 9387b02dff85b42944d95c3bccf59059c93fb4a9)
armv4: add a stub for dcache_line_bytes()
Reviewed-on: https://chromium-review.googlesource.com/173976
(cherry picked from commit 924f61ea895b9268c716791466637009bbac6469)
tegra124: Base early UART on CLK_M to enable debugging of PLL init code
Reviewed-on: https://chromium-review.googlesource.com/174339
(cherry picked from commit 8d9387432f0a0d9b257b040304238e543cced1aa)
tegra124: Add additional PLLs and redesign the divisor table
Reviewed-on: https://chromium-review.googlesource.com/174380
(cherry picked from commit f6a5f5c4562f1ca733505717c175be00413f2384)
Squashed 49 commits for tegra124/nyan that included a lot of churn on
different pieces.
Change-Id: I00e8f5b74e835e01b28ca2e9c4af3709c9363d56
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6869
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Change-Id: I3d664ab575bf9c49a7bff9a395fbab96748430d0
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6802
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
|
|
This fixes the ACPI interrupt storm on Parrot that happens when
closing the lid or entering suspend by lid close (seen in
/sys/firmware/acpi/interrupts/gpe1F). This patch inverts the interrupt
trigger level every time the interrupt is received so that it doesn't fire
until the next state change. http://askubuntu.com/questions/310196
is a good example of what this is trying to solve.
Change-Id: I8b095914e9330c3217a4ceb058613fa952f4a234
Signed-off-by: Andrew Litt <ajlitt@splunge.net>
Reviewed-on: http://review.coreboot.org/6858
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Unlike in old style CBMEM, dynamic CBMEM does not have a
hand-calculated, hard-coded size, so allow up to 144K of
space for ACPI tables.
Change-Id: Id9dd7447c46d5fe7ed581be753d70e59add05320
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/6795
Tested-by: build bot (Jenkins)
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Kyösti Mälkki <kyosti.malkki@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
During Vladimir's ACPI cleanups, this was moved into the mainboard's
enable stage, which will prevent the VGA option rom from executing
correctly. Move it to the finalize stage to make sure it runs after
all initialize functions have been called.
Change-Id: I0fcca4d4a95f89382f377ce923f82ecb71467fd8
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Reviewed-on: http://review.coreboot.org/6845
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The bootblock and romstage UART consoles were being built in based only on
whether or not the bootblock and romstage consoles were selected, ignoring
whether serial console support was compiled in generally.
Change-Id: I3866519c422a990c44ced66885108eff24894563
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172580
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a4f2dd4902a05884693e6e350b6be29276d16981)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6862
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The pins for the UART had been configured manually using hardcoded offsets and
values. Now that we have pinmux functions for that sort of thing, we should
use that instead. This also provides a very simple test for the pinmux code.
Ultimately this code should be wrapped in a function which handles setting up
any of the UARTs which is appropriately parameterized and which would be
called from the bootblock main instead of being in it, but for now this is
sufficient.
Old-Change-Id: I69e36fa5fc9b6f3f5ef7f1be3e9f18cdbfdd7fe9
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171807
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d29e655b68143e86199ab1d74f89e125b16b67cc)
tegra124: Call the set_avp_clock_to_clkm function in the bootblock.
We had a hardcoded version of the set_avp_clock_to_clkm function in the
bootblock, and we had to use it until now because the real version uses
udelay, and until now that hadn't been implemented. Also, replace the delay
loop in the hacky_hardcoded_uart_setup_function with a call to the real thing.
Old-Change-Id: I6df9421bcad484e0855c67649683d474d78e4883
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172045
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 4c6dd4c7cade7d922a258e0371e43972bce77249)
Squashed two tegra124 bootblock related commits.
Change-Id: I0ce6321a04b11b7f1250ef3816fe46732777988d
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6861
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The TPM driver expects to call i2c_read with zero address length. The i2c
driver wasn't prepared to handle that particularly in the case of reads
because it expected to send an address before switching over to read mode for
the data. This change also fixes up the read and write calls to consistently
be read32 and write32 instead of readl and writel.
Change-Id: I33dee89b83d4cd9d3e1b90e84b40e761bb8d4de4
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/175966
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit cf686269424ea938d6f953d0f76103182eb71297)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6857
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The 8GB variant is x16 with 11 column bits and 4Gb density.
Change-Id: I3aa647aba88dbc928fefd826cbd01e4fa8273660
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176640
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit d18462f6fc0d40328e9619525240778ea6b1a426)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6856
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Drop a lot of u-boot-isms and share common TIS API
between I2C driver and LPC driver.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I43be8eea0acbdaef58ef256a2bc5336b83368a0e
Reviewed-on: https://chromium-review.googlesource.com/175670
Commit-Queue: Stefan Reinauer <reinauer@chromium.org>
Tested-by: Stefan Reinauer <reinauer@chromium.org>
Reviewed-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 3fc8515b9dcef66998658e1aa5c020d22509810c)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6855
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Forgot an asterisk and everything goes to hell. Sorry about that.
Change-Id: I6b2503ca3ea0f80d4e4e5d8b8c0e986fec5db2c9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/173587
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David James <davidjames@chromium.org>
(cherry picked from commit 2a357560a697b56cc6022a4dd3dda47b33568d83)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6854
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
The dump_td() debug function in the EHCI stack incorrectly masks the
amount of transferred bytes on output... the actual field is 15 bits
wide (30:16). Let's just use the mask constant we already have for all
the other code.
Change-Id: I28c6f0ec75cc613e38d53b670645d19bf9ffe1b9
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174986
Reviewed-by: Stefan Reinauer <reinauer@chromium.org>
(cherry picked from commit 570077da7f16bbe2204b4a80790e4bd8fe1a2bd7)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6853
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Move NFC_INT to GPIO9
Swap CODEC_INT to GPIO46 and WLAN_DISABLE_L to GPIO42
Swap ACCEL_INT to GPIO45 and PP1800_CODEC_EN to GPIO43
Enable PP1800_CODEC_EN, CODEC_LDOENA, CODEC_RESET_L
Old-Change-Id: I5547d34f1b7953808375aa5fe5e0a9640ae7e05e
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/175291
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5bb4bc59e37ee4fe9a0556e08a53402c822e5bd6)
samus: Misc fixes from proto1b bringup
- NFC interrupt is expected in the kernel as a GPIO now,
so set it back to that type
- NFC FW update GPIO should be low
- Accel/Codec interrupts were still set as GPIO type,
they should be set as PIRQ type
Old-Change-Id: I354c848ae7b158943f4745872b82a49e17e67e2f
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/176513
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 75a0944f320c80618f12732a23344ce40010a688)
Squashed two small patches for samus.
Change-Id: I7ec56191fe2b7f19e470df175ad0bbe320a442f5
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6852
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Old-Change-Id: Icdde4cf5e1abb3ae1ad14279ebc129919ba30074
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170837
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e9d87534ccacb42d508f1902786470798a2dbaea)
nyan: Add a "special-class" for aggregating BCT files into bct.cfg.
The config file which cbootimage processes to create a BCT could come from
multiple different files, individually selected based on config options,
and/or split up into different files for organizational purposes. This change
adds a special-class which collects those files and concatenates them all
together in a bct.cfg which can be processed more easily by other parts of the
build.
While the BCT files themselves are potentially very board specific, for
instance ones that hold memory timing information, this bit of code which
collects them is not. It has to be in each board file instead of alongside the
CPU, however, to ensure that the special class is set up before another
Makefile tries to use it. If we end up with lots of Tegra based boards which
duplicate this code over and over, we might want to revisit how this works.
Old-Change-Id: I58e1373434f89e69298990ea4643a19d8afdc309
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170922
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 3ae44178b7084037a75e16ce161b1432abf4246a)
nyan: Add bct files for nyan.
There's a config option which selects between the emmc and spi config files
depending on what the firmware is intended to boot from. These are copied from
the files installed by the tegra-bct-nyan ebuild, except that the spi config
file has been modified so that there's only one copy of the BCT and so that it
only has one configuration. This is to save space in the final image.
Old-Change-Id: Ibf1b895bb3ed060d394fc6ffcec67b6972bb21e3
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170923
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 6bbcffe04e8ae73c86bc05c577a67f909857e1c0)
Squashed three commits required to get nyan building since some patches
were out of order. Added a select to the nyan mainboard Kconfig to have
a rom size of 1024K to match the saved config on the chromium side.
Change-Id: I346dbb02d216adfea9707e40adf0a4d1e0fabf36
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6669
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Add rules for building the nvidia-cbootimage utility and add dependencies
to the tegra124 platform.
Change-Id: Ia9f26981bccd217fe79e1b5dd432ee7da868d22a
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6851
Reviewed-by: Aaron Durbin <adurbin@google.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
ExpressCard is connected to PCIe port 4.
Change-Id: I0cffabd9d9435d24a7e9c178c2f96fb1a9390320
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6850
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Replace codec config copied form T530 with dumped values from T520
/sys/class/sound/card0/hdaudioC0D0/init_pin_configs.
Intel Azalia HDMI is always enabled, but DP isn't connected to a
connector.
Change-Id: Iabdae4a6669ff429d5769a1bb0c0fb1abc12ba82
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6849
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I67f321583211efd9ed917276cc3989c6dc4ac649
Signed-off-by: Nicolas Reinecke <nr@das-labor.org>
Reviewed-on: http://review.coreboot.org/6848
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This just updates a comment which refers to "board_init_f". We use
bootblock main() in coreboot.
Change-Id: I4cb6b3c11f163b67fe48de495d13dce88710efc0
Reviewed-on: https://chromium-review.googlesource.com/172095
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
Tested-by: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 65139f29682cedca8dfb58b3dfe67eab64299064)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6791
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Install the BL1 and set up the checksum in the Makefile instead of relying on
post processing. Import the exynos checksum script, split it in two and
simplify it significantly. Stop putting the CBFS header in the midst of the
bootblock so that it can be checksummed before CBFS is put together. Stop
saving space for it and leaving an anchor in the bootblock which nobody looks
for.
Change-Id: Icbb5a5914ece60b2827433b6dc29d80db996ea6c
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/179229
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit aa3a416705517c0a6ddfdeb19905ac8cafb33df1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6834
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
All this version does is define asmlinkage to be nothing. It's required by the
threading header file which is brought in by the timer implementation which I
think is the hook for thread switching.
Change-Id: Id57261d7c2c5ff8be00b0ad71bf7aaa9f3e24c1d
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171801
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e00379f54802066fd3e0685b291cdec289078055)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6831
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
The bootblock for the tegra124 runs on the AVP coprocessor which uses the
ARMv4 architecture. Switch it over to that architecture.
Change-Id: Ie527bbff938e6148c58727d448f9c2e6862da872
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171402
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit c1aa76b7607ee40ff848628971a97eea5393aebe)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6784
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
Tested-by: build bot (Jenkins)
|
|
This is needed for the tegra124's bootblock and includes enough implementation
to support that use. No caching is supported, although there are function
prototypes and stub implementations to satisfy includes and linking.
Change-Id: Ib79dde8c30eda98b3e823cba2ff6115a610bb2e8
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171401
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 221dc76b3ce4c1d73851c432333e091e1c60f0cb)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6783
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I7cf47a16928436734df29af951f987db9cf9530d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6847
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
As a first step towards removing hardcodes from the FUI support,
change the haswell call to i915_lightup to panel_lightup, and pass the
intel_dp * as a parameter. Get rid of the scalar arguments and make
them part of intel_dp. Get rid of file-scope variables and use the
ones in the intel_dp struct. In falco, use functions that peppy
uses. Drop slippy support for FUI, it's a dead board; if this is ok
I'll remove the files next.
And, incidentally, fix the broken RGBX constant and change it to BGRX.
Change-Id: I46ef5a9ed8433382d042066ee3542af04cfc319a
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/174932
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 1e1ed410b445c8e2b7411e163d9d6f61499dc3f6)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6833
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
It's time to start cleaning up the falco graphics code, but it needs
to have its own files, not slippy's.
Change-Id: I7dbe27eafbf247b5c7806819bf0059d8b10e842c
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172501
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: David Hendricks <dhendrix@chromium.org>
(cherry picked from commit 262a0c16a39871d14972a92bff2dbc24de2ca3f0)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6832
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Nothing is connected to this port.
Change-Id: If3e466a3053fa694a511c2335c16381f77f56f47
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174089
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 5ddb6a444d5c3141868eaf618ecb014b0262a796)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6827
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I73a8e56559c7ffdaab39a5c19311221c91565004
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6830
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
- GPIO29 is no longer connected so we don't need the SMI workaround
on the entry to sleep states.
- Disable touchscreen wake source until the kernel driver is working
so it does not wake immediately.
- Update a few GPIOs and disable the codec for now as it is leaking
into the 1.8V DDR rail.
Change-Id: Ia67b17eb4a097627befd8f39aadc939da1bf3d40
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174122
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0fdc9a83a434378499f825d072ce0adba5ffda59)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6829
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
The LPDDR3 memory is x32 and dual rank with 14 row bits.
In addition the memory is actually elpida, even though
they are owned by micron it is confusing to label it as such.
And the ram strap options were inverted from what I expected
so the memory table needs to be updated.
Change-Id: Ia29a23e8140d884fb84f940806f041b40562aab9
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174121
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0d63d36b8035165f95db798ed40488519e622a65)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6828
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ib7b6688982e9f74cffe40d11d4a9ec69acd55d37
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174088
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 41624b073fb59b1372ee5a8eba3ed64c7e633311)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6826
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ia835f16b156949f1841210c4a469223d5df28a54
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/174087
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 8e51d1d74cdcadde9cbf10e8321d601b099c46bc)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6825
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
There are ARM systems which are essentially heterogeneous multicores where
some cores implement a different ARM architecture version than other cores. A
specific example is the tegra124 which boots on an ARMv4 coprocessor while
most code, including most of the firmware, runs on the main ARMv7 core. To
support SOCs like this, the plan is to generalize the ARM architecture so that
all versions are available, and an SOC/CPU can then select what architecture
variant should be used for each component of the firmware; bootblock,
romstage, and ramstage.
Old-Change-Id: I22e048c3bc72bd56371e14200942e436c1e312c2
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171338
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 8423a41529da0ff67fb9873be1e2beb30b09ae2d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
ARM: Split out ARMv7 code and make it possible to have other arch versions.
We don't always want to use ARMv7 code when building for ARM, so we should
separate out the ARMv7 code so it can be excluded, and also make it possible
to include code for some other version of the architecture instead, all per
build component for cases where we need more than one architecture version
at a time.
The tegra124 bootblock will ultimately need to be ARMv4, but until we have
some ARMv4 code to switch over to we can leave it set to ARMv7.
Old-Change-Id: Ia982c91057fac9c252397b7c866224f103761cc7
Reviewed-on: https://chromium-review.googlesource.com/171400
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 799514e6060aa97acdcf081b5c48f965be134483)
Squashed two related patches for splitting ARM support into general
ARM support and ARMv7 specific pieces.
Change-Id: Ic6511507953a2223c87c55f90252c4a4e1dd6010
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6782
Tested-by: build bot (Jenkins)
|
|
Change-Id: I3ad8eed42255db426987065190c197baead40673
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6836
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Windows bugchecks on this for a while, so we ifndef'd the free() call out.
Now some Linuxes (depending on their glibc) also fail on it, so just
remove the call altogether at the cost of some leaked memory (couple
hundred kilobytes) because tracking down the precise fix is too hard.
In case someone wants to fix it, valgrind sees the issues, so
revert this change and work on romcc's memory management until valgrind
is happy.
To get a fix in, provide a good explanation why your change is actually
the right way to fix it - for silencing valgrind, this change will do.
Change-Id: Iae3f847e09a0d7bcb8bb4f50983a1b0727570b23
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6846
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This approach avoids having same basic tables 150-lines mantra over 100 times
in codebase.
Change-Id: I76fb2fbcb9ca0654f2e5fd5d90bd62392165777c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6801
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I9366dded98bf15f6da44ce893dd10698ba09fd55
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6820
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
SMI1 is being written to but never read from.
Change-Id: I82c0800713e3093eb1317b5e1f6f228771134857
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6808
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
This reduces disk use and simplifies using abuild on
a ramdisk.
Change-Id: I3fb8d273dcbb5008fa9cfaa9465a59e3bbcb974b
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6835
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3d694e5b3092d78bce89f6baa7b2dedffddf3012
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6807
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: Ic044bf155bfcf93fa7cf3afd7287b7d0b615ef6d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6839
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: I3463d0c283793547b00a7628f27f2f1777c21238
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6838
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Change-Id: Ie605efdda3b486ae6ef780266e6c651e41bb5392
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6837
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Create a new mainboard based on the AMD DB-FT3 development board
(Olive Hill) using an AMD Steppe Eagle processor. The actual DB-FT3
and DB-FT3b mainboards are identical except for the soldered-down
SoC device. The new AMD DB-FT3b development board (Olive Hill+)
features:
* Mini-ITX form factor
* 2x DisplayPort
* 1x VGA
* Integrated Realtek RTL8111-compatible Ethernet
* 2x USB 3.0 ports
* 2x USB 2.0 externally-accessible ports
* 2x USB 2.0 internally-accessible ports (via headers)
* micro LPC header
* Integrated platform security processor
* 2x Full-size DDR3 DIMM support (1 channel)
* Realtek ALC272 HD audio
* 2x SATA ports
* 1x SD card slot
* 1x PCIe (x4) slot
* 1x mini-PCIe slot
* 8-pin programming header
Eliminate the extraneous headers included in PlatformGnbPcie.
BiosCallOuts normally has a bunch of extraneous references to the
mainboard name. Rather than correct the spelling of a bunch of
instances, just get rid of them.
For the most part, use the Olive Hill ACPI definitions since the
DB-FT3b board ("Olive Hill+") and Olive Hill are the same board
with different processors.
Change some function prototypes for functions without parameters
to void instead of AGESA's VOID. There are no parameters for
these functions, so there is no real reason to use VOID.
S3 and fan control are not supported. HD audio is not working.
Change-Id: I794d7a8f4f948346cfe7cbd443c9aed5f70c99ed
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6681
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Martin Roth <gaumless@gmail.com>
|
|
The Linux trampoline code does not set up the segment descriptors for
__BOOT_CS and __BOOT_DS as described in the Linux kernel
documentation:
... a GDT must be loaded with the descriptors for selectors
__BOOT_CS(0x10) and __BOOT_DS(0x18); both descriptors must be 4G
flat segment; __BOOT_CS must have execute/read permission, and
__BOOT_DS must have read/write permission;
This is not a problem when launching a Linux payload from coreboot, as
coreboot configures the segment descriptors at selectors 0x10 and
0x18. Coreboot configures these selectors in the ramstage to match
what the Linux kernel expects (see
coreboot/src/arch/x86/lib/c_start.S).
When the cbfs payload is launched in other environments, SeaBIOS for
example, the segment descriptors are configured differently and the
cbfs Linux payload does not work.
If the cbfs Linux payload is to be used in multiple environments
should the trampoline needs to take care of the descriptors that Linux
requires.
This patch updates the Linux trampoline code to configure the 4G flat
descriptors that Linux expects. The configuration is borrowed from
the descriptor configs in coreboot/src/arch/x86/lib/c_start.S for
selectors 0x10 and 0x18.
The linux_trampoline code is slightly refractored by defining the
trampoline entry address, 0x40000, as TRAMPOLINE_ENTRY_LOC. This
definition is moved into a separate header file, linux_trampoline.h.
This header file is now included by both the trampoline assembly
language code and the trampoline loader C code.
The trampoline assembly language code can now use TRAMPOLINE_ENTRY_LOC
as scratch space for the sgdt CPU instruction.
Testing Done:
Verified the Linux payload is booted correctly in the following
environments:
1. Coreboot -> Linux Payload
2. Coreboot -> SeaBIOS -> Linux Payload: (previously did not work)
Change-Id: I888f74ff43073a6b7318f6713a8d4ecb804c0162
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Reviewed-on: http://review.coreboot.org/6796
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This target does (pretty much) exactly the same what jenkins
is doing on our build nodes:
- complete abuild run of our tree with a given payload
- building all libpayload configs we ship
- building the cbmem utility
In fact at some point we could tell jenkins to just run this command.
For debugging, pass along V and Q variables so inner make processes
are slightly more noisy on demand.
Change-Id: Ib515170603a151cc3c3b10c743f1468a9875dbdc
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6797
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Ubuntu's HDMI audio has noise and echo. Disable NoSnoopEnable can
resolve this issue. The posted amd_late_init.c northbridge code
is missing a test for Steppe Eagle northbridges. See coreboot Gerrit
change 3934, commit ID 4ca721399c (AMD Olive Hill: Disable
NoSnoopEnable to fix HDMI audio corruptions with Ubuntu).
Change-Id: I89894d0ce4ad72ea16d61b445edb9e67920bca24
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6822
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
This patch represents a major overhaul of the USB enumeration code in
order to make it cleaner and much more robust to weird or malicious
devices. The main improvement is that it correctly parses the USB
descriptors even if there are unknown descriptors interspersed within,
which is perfectly legal and in particular present on all SuperSpeed
devices (due to the SuperSpeed Endpoint Companion Descriptor).
In addition, it gets rid of the really whacky and special cased
get_descriptor() function, which would read every descriptor twice
whether it made sense or not. The new code makes the callers allocate
descriptor memory and only read stuff twice when it's really necessary
(i.e. the device and configuration descriptors).
Finally, it also moves some more responsibilities into the
controller-specific set_address() function in order to make sure things
are initialized at the same stage for all controllers. In the new model
it initializes the device entry (which zeroes the endpoint array), sets
up endpoint 0 (including MPS), sets the device address and finally
returns the whole usbdev_t structure with that address correctly set.
Note that this should make SuperSpeed devices work, but SuperSpeed hubs
are a wholly different story and would require a custom hub driver
(since the hub descriptor and port status formats are different for USB
3.0 ports, and the whole issue about the same hub showing up as two
different devices on two different ports might present additional
challenges). The stack currently just issues a warning and refuses to
initialize this part of the hub, which means that 3.0 devices connected
through a 3.0 hub may not work correctly.
Change-Id: Ie0b82dca23b7a750658ccc1a85f9daae5fbc20e1
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170666
Reviewed-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit ecec80e062f7efe32a9a17479dcf8cb678a4a98b)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6780
Tested-by: build bot (Jenkins)
|
|
We had brought this code in from the kernel but found it best to
use mainboard- or chipset specific versions. Firmware should
strive to be as non-generic as possible.
Change-Id: Ic1ca746cc52c3f9ea4de6895f2b32946229beada
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172625
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 7dba0dfd25bf9e367f9e5128b15edb018e958c3a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6779
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This patch removes the confusing concept of a special "xhci_speed" with
a different numeric value from the usual speed used throughout the USB
core (except for the places directly interacting with the xHC, which are
explicitly marked). It also moves the MPS0 decoding function into the
core and moves some definitions around in preparation of later changes
that will make the stack SuperSpeed-ready. It makes both set_address
implementations share a constant for the specification-defined
SetAddress() recovery delay and removes pointless additional delays from
the non-XHCI version.
Change-Id: I422379d05d4a502b12dae183504e5231add5466a
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170664
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit f160d4439c0d7cea1d2e6b97207935d61dcbb2f2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6776
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
git can do lots of things by itself, no need to parse
its output and redo that.
Change-Id: Id2cdd2ea8d34c1ba2b0abddc88e1f3260d74f47d
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/6798
Tested-by: build bot (Jenkins)
Reviewed-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I9b3c9109b01e348259e64e93a4397212216ab152
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6799
Tested-by: build bot (Jenkins)
Reviewed-by: Aaron Durbin <adurbin@google.com>
|
|
Change-Id: I97ccd08a5e7f094908ed3a85ddae53b158124995
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6823
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I12ce0dda823d7733c473ed5ef3b0470d95d794ae
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6805
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Checked by comparing binaries and seeing no differences other than
build info.
Change-Id: Ie702c540a18b50d6da0379f7c4e65adf3e4f18d4
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6819
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Not referenced anywhere.
Change-Id: I6529f2ecbc34a2fa9ca720fea1224670eb98bdcd
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6815
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
Change-Id: I1ab2118a3127dfacef6a389abd59050493e640fb
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6817
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
|
|
The BLOBs repo has been updated with AMD PI header files, peripheral
BLOBs for the new Avalon southbridge, the AGESA binary PI BLOB for
Steppe Eagle, the Steppe Eagle video BIOS, and platform security
processor firmware.
Change-Id: I8bb58a5cc572d2d75de33b14843d7d1893fff532
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6770
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Marc Jones <marc.jones@se-eng.com>
|
|
There is some magic new SPD SDRAM type 241 to indicate LPDDR.
I cannot find it specificed in any JEDEC document but it is
what the reference code uses.
Change-Id: I21d7a943784435cb336ecdba7ca5eac0bf5fcd92
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171900
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 0a1385515c62fd1e534b12568df8aaf2170e06f4)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6777
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
This patch fixes a bug in the XHCI stack that occurs when a multi-TRB TD
times out before the last TRB is processed. The driver will correctly
issue a Stop Endpoint command in that case, but the xHC will still
preserve the transfer state and just pick up right after that on the
next doorbell ring. It will then process the leftover TRBs from the old
TD the next time a transfer is issued. (cf. XHCI 4.6.9)
We fix this by changing the existing xhci_reset_endpoint() calls in
transfer functions to not only trigger on Halted (2) and Error (4), but
also on Stopped (3). That function will not actually issue a Reset
Endpoint command in this case, but it will nuke the whole transfer ring
and issue a Set TR Dequeue Pointer command, which is sufficient (though
slightly overkill) to solve our problem.
Change-Id: I3abbe30ff9d4911a8af1f792324e018d427019e8
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/170833
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
(cherry picked from commit f12424af0e29ac12963e8e5a7970fadcc0bb6cee)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6787
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I1be939e870e8792f5ebb23623fe8f7f119adec36
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6806
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I7b9b91519d87d70405b57920b3f1ab98c50526d1
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6810
Tested-by: build bot (Jenkins)
Reviewed-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
OEM strings should not be handled by mobo code but by common code with strings
collected from all devices.
Change-Id: Ibde61a1ca79845670bc0df87dc6c67fa868d48a9
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6788
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
Change-Id: I9998b0b4a1413ab65f1dbdf59b2f84d331ce9c3d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6790
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I9fd7f894d0e611f61e8702e4eacb12d7b81154d8
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6789
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Tablets have different mainboard version than laptop variants.
Change-Id: I77a1e2b50d30dcf3fa064e0c378ceca7ccf96e89
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6785
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
_QXX numbers are determined experimentally, hotkey scancodes from thinkpad-acpi
module.
Change-Id: I1f7548ef62529ae25dcdcbed0fc74390b7529a2e
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6765
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add the CPU files required to support the Steppe Eagle and Mullins
models of Family 16h SoC processors from AMD. This CPU is based on
the Jaguar core and is similar to Kabini.
Change-Id: Ib48a3f03128f99a1242fe8c157e0e98feb53b1ea
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6679
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
Add the northbridge file for AMD's new Mullins and Steppe Eagle
processor family. Since the processor family name is not the
same across AMD's sales and marketing channels, I have elected
to use part of the processor ID as the family name. The intent
is to reduce confusion since the processor ID is the same for
both families. This northbridge support has only been validated
on the AMD Embedded variants ("Steppe Eagle").
The AGESA wrappers in coreboot have a function that is intended to
mirror the UMA memory allocation performed during memory initialization
by AGESA. Update the Steppe Eagle memory allocation to mimic the
memory reservation done inside the AGESA BLOB.
Change the default CBMEM address, the default video BIOS device ID,
and a couple of other defaults to match changes in coreboot community
code.
The northbridge chip.h specifies how many processor sockets, how
many channels, and how many DIMM slots are supported by the
northbridge. Steppe Eagle does not permit multisocket systems
and has only one memory controller channel.
Change-Id: I20d8b78e3b153cda2dd05100fbb75e2ebadd9e08
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6678
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
00730F01 contains the Avalon southbridge and a Platform Security
Processor (PSP). Supporting the PSP requires specific binaries to
be included in the ROM. The fletcher utility is used to sign PSP
binaries.
The IMC access routines are not accessible for newer AMD parts that
use pre-compiled AGESA. Change the Hudson code such that the IMC
code is not compiled if IMC is not selected in Kconfig.
Disable compilation of resume.c if HAVE_ACPI_RESUME is disabled.
The newer AMD mainboards will initially be released without ACPI
resume support (S3) due to the use of AGESA internals in the
existing Hudson routines. The Makefile change allows newer
mainboards to avoid the API issues.
Change Kconfig such that the FWM flag is always set for PSP-enabled
parts. This has the side effect of forcing the generation of the
FWM directory in the absence of GEC, IMC, and xHCI.
Change-Id: I6d056f54b60a64300841599490b9fafd561c4a7d
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6677
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
Add all of the PI source that will remain part of coreboot to
build with a binary AGESA PI BLOB. This includes the gcc
makefiles, some Kconfig, and the AGESA standard library
functions.
Change vendorcode Makefile and Kconfig so that they can compile
AMD library files and use headers from outside the coreboot/src
tree.
The AGESA dispatcher is built using its own rules rather than
generic library generation rules in coreboot/Makefile and
coreboot/Makefile.inc. The AGESA source files are initially
copied from whereever they live into coreboot/build/agesa.
They are compiled from there. The binary PI directory has a
mandatory structure that places the AGESA BLOB into the same
directory as the support headers. These will nominally be
placed in the 3rdparty directory in coreboot.org.
The copy commands that were added to the the vendorcode
Makefile.inc ensure that only one thread will operate on each
source file by using a macro to generate the copy targets.
After the change, each copy target will operate on exactly one
source file.
Due to API issues, coreboot has no way to control the IMC to set up
fan control. Set a Kconfig flag that removes the ability to install
an IMC BLOB into CBFS.
Change-Id: I050b72a19086aaeba6cb65ce165297b10e3cfc45
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6595
Tested-by: build bot (Jenkins)
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
Change-Id: Ic213948e4d31457dda9b9f2d5a4f92cd34d1e57d
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6757
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Change-Id: I1b51310b4387e588c4828563620b0e2770598503
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6753
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The AMD Platform Security Processor (PSP) requires a Fletcher's
Checksum at the end of the PSP directory. This code implements
a Fletcher's Checksum by reading bytes from stdin and writes the
bytes back to stdout with a checksum inserted into the byte stream
at the appropriate offset.
This utility is used on PSP binaries during coreboot build.
Include a runtime debug option such that the command:
fletcher --print <file.bin >file_with_cksum.bin
will print out the computed checksum value for debugging. The
compile-time debug option is retained that allows -DDEBUG to
be added to the compilation line. This option has the same
effect as "--print".
Change-Id: I506a479d8204ca4f8267d53aa152ac4b473dbc75
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6676
Reviewed-by: WANG Siyuan <wangsiyuanbuaa@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Zheng Bao <zheng.bao@amd.com>
|
|
Change-Id: Ib5b92120cbe2ca41c9813e8caeb03161f4d3954c
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6786
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Tested-by: build bot (Jenkins)
|
|
This interrupt needs to be specified in the MADT before it can
be used by the kernel driver.
Change-Id: Ic920a792a203cb06cd4529815680584a21532106
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171902
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit a330fddb62cb6346ad66ceb5b5c32b66aecd81e2)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6778
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
Add the coreboot board files for samus
- Based on Bolt
- GPIO setup based on 0.91 schematic
- Support both memory types
- No HDA verb table for this platform
- Some GPIO interrupts are shared and need to be passed to OS
Change-Id: I8dbd7639456c631a0115b03a493d94b5e2361ab5
Signed-off-by: Duncan Laurie <dlaurie@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/171694
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
(cherry picked from commit 249a74c628264e3d4ce754803ede31238404b4d5)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6775
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
tegra124: Add a test function which spams exclamation points on the UART.
This function spews characters on the console and, until we have a working
console, is an easy way to see whether the system boots to a particular point.
For some reason waiting for transmitter to be empty hangs, but transmitting
characters still works.
Old-Change-Id: I1622c8a58849f4b8bdcaa67500b81042d7346df4
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171030
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit e0059181958cfe8afec2f3a7ea732e81f5d55e5d)
tegra124: Re-enable waiting for the transmitter to empty in the test function.
The compiler was emitting code compatible with armv7-a, but the bootblock was
running on a core which uses armv4t. By coincidence, it was emitting an
instruction which is unavailable on armv4t when checking the value of the
UART's LSR register. Now that the bootblock is compiled with more appropriate
flags, this code can be re-introduced.
Old-Change-Id: I7ecada4138b0889b963d1a8b19a4bab8e0bb1add
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170997
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 2a0adceb5029c8ee633d17c82dbb11e48d30349d)
tegra124: Seperate out the non-UART specific hardcoded init in the bootblock.
The hardcoded init in the test function in the bootblock is actually useful
generally because it doesn't belong in the UART driver itself but is necessary
for the UART to work. Until we have real implementations for the pinmux, etc.,
we can use that code to get the UART and console going.
Old-Change-Id: I2efe0b571d8b022eb2a2e5569620558540b28373
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171334
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit ae7d4d890be1936cc86dc15adeb33f3b46a51ae5)
tegra124: Implement and enable serial console support for tegra124.
The driver is very similar to the 8250 driver, except it isn't in two parts,
and it also spaces its registers 4 bytes apart instead of having them directly
adjacent to each other.
Also, eliminate the UART test function in the bootblock. It's no longer needed
since the actual console output serves the same purpose.
Right now the clock divisor is fixed for now, and we'll want to actually
figure out what value to use at some point.
Old-Change-Id: Idd659222901eb76b0ed8cbb986deb5124096f2f6
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171337
Reviewed-by: Gabe Black <gabeblack@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 86f5e2875b18901b349283cfbcd4f8cc88b7a019)
Squashed 4 commits related to uart support for tegra124. Modified the
new uart.c to look like the uart.c for exynos5420.
Change-Id: I490cba014a43d58c30c48ca9ddcae2b00095b7a6
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6764
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
The exynos directories had been moved from src/cpu to src/soc, but the name
of the chip_operations structure wasn't updated properly. That meant that the
SOCs never installed their memory resources and the ram stage would fail to
load the payload.
Change-Id: Ib60489b6d3434e3ebd13827a804452f762747f1b
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/172400
Reviewed-by: David Hendricks <dhendrix@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9100d475ebcc4dae23184583a6cc0162577e70d1)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6781
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
This minor refactoring patch changes the signature of all limited cache
invalidation functions in coreboot and libpayload from unsigned long to
void * for the address argument, since that's really what you have in
95% of the cases and I think it's ugly to have casting boilerplate all
over the place.
Change-Id: Ic9d3b2ea70b6aa8aea6647adae43ee2183b4e065
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/167338
(cherry picked from commit d550bec944736dfa29fcf109e30f17a94af03576)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6623
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I932e4566ec6313a7f2dbd58784bde71bca12abd7
Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-on: http://review.coreboot.org/6671
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: Ib2d7a3d9bda94f80886da96c2b766d29fc15a834
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/6772
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
commit 9518b56 (intel/gma: Clarify code and use dedicated init for
Google Peppy) changed "struct edid" and thereby broke the build.
Adapt drivers/emulation/qemu/bochs.c to the changes to fix this.
Build failure triggers with CONFIG_FRAMEBUFFER_KEEP_VESA_MODE=y.
Change-Id: I2d3cecde21d495e9b99ff8d2f741f8a462c75a4d
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/6771
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
commit 9518b56 (intel/gma: Clarify code and use dedicated init for
Google Peppy) changed "struct edid" and thereby broke the build.
Adapt drivers/emulation/qemu/bochs.c to the changes to fix this.
Build failure triggers with CONFIG_FRAMEBUFFER_KEEP_VESA_MODE=y.
Change-Id: Ic295c6d31284555e1463af5bca673231b8722d54
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-on: http://review.coreboot.org/6769
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
While the 8250 compatible serial port driver is primarily useful on x86
systems because it works with the legacy x86 com ports, some devices which
aren't x86 based have 8250 compatible UARTs as well. This change renames the
CONFIG_X86_SERIAL_CONSOLE option to the more general and direct
CONFIG_8250_SERIAL_CONSOLE and fixes up the dependencies so that non-x86
systems can enable the driver, although it will default to on on x86 and off
otherwise.
Also, the default IO port address that's added to the sysinfo structure on x86
and which is intended to be overwritten by a value in the coreboot tables is
not used on ARM. That variable is adjusted so that it's more clear it's a
default value, and made dependent on x86 since that's the only place its value
is actually used.
Change-Id: Ifeaade0e7bd76d382426e947275a9c933da4930e
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/170834
Reviewed-by: Hung-Te Lin <hungte@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 9a10e39a2da3cb0bfb316c0869cf5025078e287f)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6655
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
|
|
This implementation is the same as the general one except that it removes all
the things that don't work on an ARMv4.
Change-Id: I1108a79cc656b26f7d48df20aef3016cf5ae3182
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171019
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit d1436288d3b025af27a8d28ba94b589940ead504)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6713
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Tegra needs to use a custom bootblock implementation because it starts on a
coprocessor which uses ARMv4. It doesn't have the same control registers,
caches, etc., and the regular bootblock gets exceptions and dies.
Change-Id: Id197db2939bc840ad64244d6e2017fc5c89e0cbd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171018
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a66393fdd6fe68757e394b8a611e610f1938771d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6710
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
driver
Move (and rename to make it clearer) the function that computes display
parameters from the dpcd and edid.
Change-Id: Idfbb56fd312b23c742c52abca1a34ae117a8fece
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171366
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit 8f2b3bafee7cb05db8fae1c52fc9e1ee64e5e35d)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6768
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The existing USB_MEMORY mechanism to instantiate non-PCI host
controllers is clunky and inflexible... most importantly, it doesn't
allow multiple host controllers of the same kind. This patch replaces it
with a function that allows payloads to directly instantiate as many
host controllers of whatever type they need.
Change-Id: Ic21d2016a4ef92c67fa420bdc0f0d8a6508b69e5
Signed-off-by: Julius Werner <jwerner@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/169454
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit b6e95c39dd91f654f0a345f17b3196f56adf4891)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6644
Tested-by: build bot (Jenkins)
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
make junit.xml tries to build it, but fails
(ARM port doesn't seem to be ready?)
Useful test case to demonstrate a failing
libpayload build.
Change-Id: Iba4fe551b48f631e6a3bd90eb07930fc70761332
Signed-off-by: Patrick Georgi <patrick@georgi-clan.de>
Reviewed-on: http://review.coreboot.org/4552
Tested-by: build bot (Jenkins)
Reviewed-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
|
|
Apparently when I originally wrote this I confused myself to no end.
The code/data of an rmodule has a set memory size which is associated
with the .payload section. The relocation entries may increase the
overall footprint of the memory size if the rmodule has no bss but
a lot of relocations. Therefore, just compare relocation entries size
plus the file size of the .payload section with the memory size of the
paylod section. The .empty section is added only when we have not met
the final target size.
Change-Id: I5521dff048ae64a9b6e3c8f84a390eba37c7d0f5
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: http://review.coreboot.org/6767
Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
Tested-by: build bot (Jenkins)
Reviewed-by: Furquan Shaikh <furquan@google.com>
|
|
The Exynos family and most ARM products are SoC, not just CPU.
We used to put ARM code in src/cpu to avoid polluting the code base for what was
essentially an experiment at the time. Now that it's past the experimental phase
and we're going to see more SoCs (including intel/baytrail) in coreboot.
Change-Id: I5ea1f822664244edf5f77087bc8018d7c535f81c
Reviewed-on: https://chromium-review.googlesource.com/170891
Tested-by: Hung-Te Lin <hungte@chromium.org>
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Hung-Te Lin <hungte@chromium.org>
(cherry picked from commit c8bb8fe0b20be37465f93c738d80e7e43033670a)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6739
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Change-Id: I8c30742f6cd759dce4c9641edad107d9e3154975
Signed-off-by: Idwer Vollering <vidwer@gmail.com>
Reviewed-on: http://review.coreboot.org/6766
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
haswell/gma.c
The code to set the graphics translation table has been in the
mainboards, but should be in the northbridge support code.
Move the function, give it a better name, and enable support for > 4
GiB while we're at it, in the remote possibility that we get some 8
GiB haswell boards.
Change-Id: I72b4a0a88e53435e00d9b5e945479a51bd205130
Signed-off-by: Ronald G. Minnich <rminnich@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171160
Reviewed-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
(cherry picked from commit d5a429498147c479eb51477927e146de809effce)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6741
Tested-by: build bot (Jenkins)
|
|
When compiling coreboot for x86 on gcc the compiler is
free to pick whatever defaults it is using at the time of
gcc's compile/configuration when no -march is specified.
Not properly specifying -march then opens up the use of SSE
instructions for compilation units it should not be used such
as the SMM module as this module doesn't save/restore SSE
registers.
Change-Id: I64d4a6c5fa9fadb4b35bc7097458e992a094dcba
Signed-off-by: Aaron Durbin <adurbin@chromium.org>
Reviewed-on: https://chromium-review.googlesource.com/172640
Reviewed-by: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit d49358f7959bb52c3e7ff67d37c21a1b294adf72)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6716
Tested-by: build bot (Jenkins)
|
|
Peppy had some issues with FUI. We decided it was time to create
peppy-specific gma.c and i915io.c files. Using yabel and the i915tool,
we generated a replay attack, then interpolated against the slippy
i915io.c to get something working.
Also, in preparation for moving code out of the mainboard gma.c to
generic driver code, we got rid of some hardcodes in the mainboard
gma.c that have no business being there. The worst were the
computation of gmch_[m,n] and it turns out that we had some
long-standing bugs related to confusion about 'bpp'. I've killed the
word bpp everywhere I could because there are at least 3 things that
correspond to bpp. We now have framebuffer, pipe, and panel bpp. The
names are long because I want to avoid all the mistakes we've all been
making in the last year :-) Sadly, that means a lot of changes not just
peppy-related, but they are simple and in a good cause.
The test pattern generation is driven by a global variable in
mainboard/peppy/gma.c. I've found in the past that it's very useful
to have a function like this available, as one can activate it while
using a jtag debugger: halt at the right place in ramstage, set the
variable to 1, continue. It's not enough code to worry about always
including.
The last hard-codes for M and N registers are gone, and the function
to set from generic intel_dp.c code works. To avoid screen trash on a
dev mode boot, which we liked but nobody else did :-), we now take the
time to put a pleasing background color that sort of doubles as a
power LED.
Rough timing is ramstage start is at 2.2, and dev setup is done at
3.3. These new platforms are depressingly slow to boot. Rom init alone
is taking 1.9 seconds. 13 years ago it was 3 seconds from power on to bash
prompt. These CPUs are at least 10x faster and take much longer to get going.
Future work, once we get this through, is to move more functions to the
intel driver, and combine the mainboard i915io.c into the mainboard gma.c.
That separation only existed because i915io.c was generated by a tool, and it
had lots of ugliness. Most ugliness is gone.
Old-Change-Id: I6a6295b423a41e263f82cef33eacb92a14163321
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Reviewed-on: https://chromium-review.googlesource.com/170013
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Ronald Minnich <rminnich@chromium.org>
Tested-by: Ronald Minnich <rminnich@chromium.org>
Reviewed-by: Furquan Shaikh <furquan.m.shaikh@gmail.com>
(cherry picked from commit 8cdaf73e3602e15925859866714db4d5ec6c947d)
snow: Fix a typo in devicetree.cb that was breaking the snow build.
A typo in a recent change broke the snow build.
Old-Change-Id: I93074e68eb3d21510d974fd8e9c63b3947285afd
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171014
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit 154876c126a6690930141df178485658533096d2)
Squashed a fix into the initial patch and updated nehalem/gma.c
to have a non-static gtt_poll.
Change-Id: I2f4342c610d87335411da1d6d405171dc80c1f14
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6657
Tested-by: build bot (Jenkins)
|
|
Change-Id: Ifbc59c28c8d8bd844801da9cb869c5dfbda09168
Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com>
Reviewed-on: http://review.coreboot.org/6754
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
|
Add a #define for the HT northbridge link ID into the "known PCI
device IDs" table.
Change-Id: If0a32b2af5df6c20e0fb5af200c06d80fab3637a
Signed-off-by: Bruce Griffith <Bruce.Griffith@se-eng.com>
Reviewed-on: http://review.coreboot.org/6680
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
Tested-by: build bot (Jenkins)
Reviewed-by: Edward O'Callaghan <eocallaghan@alterapraxis.com>
|
|
The register indexes and bitfield masks were guarded by the UART8250 config
options, but it might be (is) necessary to use them in a driver that is
UART8250 like without actually using the 8250 driver itself. To avoid any name
collision with other drivers, also change the constant prefix from UART_ to
UART8250_.
Change-Id: Ie606d9e0329132961c3004688176204a829569dc
Signed-off-by: Gabe Black <gabeblack@google.com>
Reviewed-on: https://chromium-review.googlesource.com/171336
Reviewed-by: Ronald Minnich <rminnich@chromium.org>
Commit-Queue: Gabe Black <gabeblack@chromium.org>
Tested-by: Gabe Black <gabeblack@chromium.org>
(cherry picked from commit a93900be8d8a8260db49e30737608f9161fbf249)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6715
Tested-by: build bot (Jenkins)
Reviewed-by: David Hendricks <dhendrix@chromium.org>
|
|
Some drivers (like the I2C TPM driver) call mdelay instead of
udelay. While it's a shame that these chips are so slow, the
overhead of having those functions available in romstage is
minimal.
Signed-off-by: Stefan Reinauer <reinauer@google.com>
Change-Id: I1fa888fc5ca4489def16ac92e2f8260ccc26d792
Reviewed-on: https://chromium-review.googlesource.com/167542
Reviewed-by: Stefan Reinauer <reinauer@google.com>
Tested-by: Stefan Reinauer <reinauer@google.com>
Commit-Queue: Stefan Reinauer <reinauer@google.com>
(cherry picked from commit 7083b6b843d803bd4ddbd8a5aaf9c5c05bad2044)
Signed-off-by: Isaac Christensen <isaac.christensen@se-eng.com>
Reviewed-on: http://review.coreboot.org/6531
Tested-by: build bot (Jenkins)
Reviewed-by: Ronald G. Minnich <rminnich@gmail.com>
|
