summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-02-13soc/intel/apollolake: pre-evaluate gpio number valuesAaron Durbin
To allow sharing macros in ASL as well as C the macros can't have complex expression because the ASL compiler does not evaluate those expressions. To that end, just pre-calculate the values. Lastly, add N_OFFSET and utilize it for symmetry. Change-Id: I546d71008e776b27ce8bcd24d2cbd2ee1b2d8020 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13693 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-13soc/intel/apollolake: limit bootblock size to 32KiBAaron Durbin
The CSE places the bootblock (IBBL in Intel parlance) below 4GiB at top of the address space. However, it's size is limited to 32KiB. For now, just limit all of bootblock to 32KiB. Change-Id: I8f84138fb81027eae1712b7af3943942c35cf0ea Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13692 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-13x86: make bootblock size for C_ENVIRONMENT_BOOTBLOCK configurableAaron Durbin
Certain platforms may need to limit their bootblock size to within a given size because specific constraints. Allow the size to be provided by the mainboard or chipset by way of the arch Kconfig being processed after those. Change-Id: I46cc6315918cde575070fa2d3e2514f28008f575 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13691 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Andrey Petrov <andrey.petrov@intel.com>
2016-02-12ktqm77: Support native raminitVladimir Serbinenko
Change-Id: Ic90d3aa714e5681c5021e2b05275d57dce428de0 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13664 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-02-12lzma: Port size-checking ulzman() version to corebootJulius Werner
We've had a second version of ulzma() that would check the input and output buffer sizes in libpayload for a while now. Since it's generally never a bad idea to double-check for overruns, let's port it to coreboot and use it where applicable. (This requires a small fix in the four byte at a time read optimization we only have in coreboot, since it made the stream counter hit the end a little earlier than the algorithm liked and could trigger an assertion.) BRANCH=None BUG=None TEST=Booted Oak, Jerry and Falco. Change-Id: Id566b31dfa896ea1b991badf5a6ad9d075aef987 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13637 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-12tegra132/pistachio: Increase romstage size in memlayout.ldJulius Werner
These SoCs have come within a kilobyte of their romstage limit, so let's expand that a little to make room for future core code contributions. (In the Tegra case just by copying the layout from Tegra210, because why not? Keeps things simple.) BRANCH=None BUG=None TEST=Ran abuild with and without --chromeos for Foster, Rush, Ryu, Smaug and Urara. Change-Id: If8c1ea81cf9827412c78d67a09d54e7a2dc044ac Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13668 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-12tegra132/210: Remove memlayout_vboot2.ldJulius Werner
Having two separate memlayouts is an unnecessary complication. Contributors need to make sure that their code fits into the vboot one (with smaller stage sizes) either way, and the Tegras have plenty of SRAM anyway. Let's just make the vboot layout the default (as it was done on other SoCs) to keep things easier to maintain. The empty SRAM holes on non-vboot systems where the verstage and work buffer would've been won't hurt them. BRANCH=None BUG=None TEST=Ran abuild with and without --chromeos on Foster, Rush, Ryu and Smaug. Change-Id: If37228facb4de1459cc720dca10bf03e04eb9930 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13667 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-12timestamp: Remove HAS_PRECBMEM_TIMESTAMP_REGION KconfigJulius Werner
This patch generalizes the approach previously used for ARM32 TTB_SUBTABLES to "auto-detect" whether a certain region was defined in memlayout.ld. This allows us to get rid of the explicit Kconfig for the TIMESTAMP region, reducing configuration redundancy and avoiding confusion when setting up future boards. (Removing armv4/bootblock_simple.c because it references this Kconfig and it is a dead file that I just forgot to remove in CL:12076.) BRANCH=None BUG=None TEST=Booted Oak and confirmed that all pre-RAM timestamps are still there. Built Nyan and Falco. Change-Id: I557a4b263018511d17baa4177963130a97ea310a Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13652 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-12samsung/*umpy: fix Kconfig formattingPatrick Georgi
Some spaces crept in where there should be tabs. Change-Id: Ie70469f5a16e8a2d5933ac632d13551b19761064 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13698 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-12util/cbfstool: Improve heuristic for cbfs header pointer protectionPatrick Georgi
cbfstool has a routine to deal with old images that may encourage it to overwrite the master header. That routine is triggered for "cbfstool add-master-header" prepared images even though these are not at risk, and - worse - destroys the chain structure (through a negative file length), so avoid touching such images. Change-Id: I9d0bbe3e6300b9b9f3e50347737d1850f83ddad8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13672 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12lumpy: Support native raminitVladimir Serbinenko
Change-Id: Id695fb6e759b90cd91bb9760bb4fe2a459480b21 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13663 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-02-12stumpy: Add native raminit supportVladimir Serbinenko
Change-Id: Ibbb056ae209a16533757af925c8c833c94803834 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13662 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-02-12link: Support native raminitVladimir Serbinenko
Change-Id: I95173c06d334a340fa2157511a1d69f38877b264 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13665 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-02-12emeraldlake2: Support native raminit.Vladimir Serbinenko
Change-Id: I808a739c91cb52782db46fd4897b6b913224d93f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13666 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-02-12chromebooks: Define GBB hardware IDsPatrick Georgi
This makes the test IDs the default, taken from depthcharge master (board/*/fmap.dts, hwid property). Change-Id: I25793962ac16f451f204dbba6ede6a64c847cfd5 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13634 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-12butterfly: Make configurable MRC vs non-MRC.Vladimir Serbinenko
Change-Id: I7b1e046d5895750d350dfa851a6f51c3a3a1613f Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13659 Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Tested-by: build bot (Jenkins)
2016-02-12stout: Support native raminitVladimir Serbinenko
Change-Id: If64607d40a64ada8cfe4c3ad054be9d6571fc221 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13660 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-02-12Make MRC vs native a config rather than making a separate chipset for it.Vladimir Serbinenko
Tested by making lenovo x230 configurable despite pretty MRC bugs. Change-Id: Ia2a123f24334f5cd5f42473b7ce7f3d77c0e65b7 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13658 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12util/kconfig: Ignore extra symbols in configs instead of failingMartin Roth
When updating an old .config file that has a symbol that has been removed from the current Kconfig tree, kconfig will generate a warning and fail to save the updated file. This is incredibly annoying, and not the goal when trying to eliminate Kconfig warnings. Instead of generating a warning, just print a message that it's being ignored. This will remove the offending symbol, while allowing the updated config file to be saved. Split the change from 1 line to 3 lines to keep it at 80 characters. Change-Id: I09d5775c9ed14bde80077b51b862a7f41bee098a Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13674 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-12mainboards: Drop remaining references to vboot indexesPatrick Georgi
Those aren't used anymore. Change-Id: If7baf2d03c47bcc6f69d63a349bbf9d5e749aeac Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13685 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-12Fix butterfly usb map.Vladimir Serbinenko
This was copied from mrc structure despite them having fields in different order. Change-Id: If10ffa3316c5fdc538a6fabf2409512bc8c3e676 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13661 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
2016-02-12bimgtool: Fix printf warning for off_tStefan Reinauer
off_t wants to be printed with %zd, not %d. Change-Id: I3f6e1988bb306f4a7738f1f3ccb2093518e4ceb3 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13655 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-12bimgtool: Match CRC code guardsStefan Reinauer
Make sure that the statically defined CRC functions are enabled by the same conditionals as the code using them. Change-Id: Ic24e2ed1a80b8e5f6623881b08d86f7b608a206e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13654 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12bimgtool: Drop unused targets and variables from MakefileStefan Reinauer
dep has not been defined (and will hence break the build) LDFLAGS is not used. Change-Id: I4f91e1e7a176367aa4e1a1c63a2afc0b3186767e Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/13653 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-12Move gpio.h to gpio.c on sandy and ivy.Vladimir Serbinenko
Change-Id: Ic9d8c2a4e5125eca20eb692ac7ed070fda6cbe32 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13657 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-12Merge sandy/ivybridge romstage flow for MRC and non-MRC.Vladimir Serbinenko
Change-Id: I11e09804ed1d8a7ae8b8d4502bd18f6be933f9fa Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13656 Tested-by: build bot (Jenkins) Reviewed-by: Alexandru Gagniuc <mr.nuke.me@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-11arches: lib: add main_decl.h for main() declarationAaron Durbin
It is silly to have a single header to declare the main() symbol, however some of the arches provided it while lib/bootblock.c relied on the arch headers to declare it. Just move the declaration into its own header file and utilize it. Change-Id: I743b4c286956ae047c17fe46241b699feca73628 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13681 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-11arch/{arm64,riscv}: remove jmp_to_elf_entry() declarationAaron Durbin
jmp_to_elf_entry() is not defined anywhere. Remove it. Change-Id: I68f996a735f2ef3dd60cf69f9b72c3f1481cbb55 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13680 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11lib/prog_loaders.c: remove arch/stages.h includeAaron Durbin
There's no delcaration used. Remove the include. Change-Id: I6fa7de6362ca0e92f0d5a7d07f3a224b9f77f709 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13679 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11arch: remove stage_exit()Aaron Durbin
It's no longer used. Remove it. Change-Id: Id6f4084ab9d671e94f0eee76bf36fad9a174ef14 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13678 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-11timestamp: Bump CBMEM timestamp count, make full use of pre-RAM regionsJulius Werner
Since we're reaching the timestamp limit on certain platforms (both for the pre-RAM cache and the final CBMEM region), this patch increases the amount of space for both. In the pre-RAM case, it achieves this by always utilizing the full size of the TIMESTAMP() region allocated in memlayout.ld, rather than arbitrarily limiting it to some constant. BRANCH=None BUG=None TEST=Booted Oak and confirmed that I can once again see all pre-RAM timestamps after picking in the LZ4 patch series. Change-Id: Iabb075a48d8d1e3e1811afeaad5ab47e7846c972 Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13651 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11soc/apollolake: Add early serial driver for BOOTBLOCK_CONSOLEAndrey Petrov
Early UART driver is for bootblock and romstage. It is supposed to be used when BOOTBLOCK_CONSOLE is enabled. This also adds few configuration bits in bootblock requiered for serial to be set up. Change-Id: I15520d566f107797e68d618885d4379e73d0fa45 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13677 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11soc/apollolake: Add minimal GPIO driverAndrey Petrov
This adds the minimal functionality needed to configure SoC pads. Change-Id: I2e2268eee2b8c822b42a48a95604b0fab86c9833 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13676 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Tested-by: build bot (Jenkins)
2016-02-11mainboard/intel: Add skeleton for Apollolake RVP board familyAlexandru Gagniuc
RVP1 board comes with DDR3 SODIMMs and discrete VRs. RVP2 board uses LPDDR3 and PMIC. Change-Id: I3e47c157c49ad55ff1ba824672ac2630a64a6037 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13298 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11soc/apollolake: Add initial cache-as-ram setup for bootblockAlexandru Gagniuc
This is the minimum setup needed to both get cache-as-ram setup and a C environment working. On apollolake, we only get 32 KiB of data loaded into an SRAM that is readonly to the main CPU. Due to this restriction we have to set CAR and a C environment very early on. Change-Id: I65c51f972580609d2c1f03dfe2a86bc5d45d1e46 Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13301 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11git modules: rename git submodules to avoid hierarchiesPatrick Georgi
Having a git module named "3rdparty" and another one in "3rdparty/chrome-ec" led to git failures when the latter was initialized before the former (because of git being stupid, but then it says so on the box, right?) Rename modules so there's no such hierarchy (3rdparty -> 3rdparty/blobs). While at it, also rename the culprit to match the path name (3rdparty/chrome-ec to 3rdparty/chromeec). git will resolve this on the next git submodule update invocation (eg. the next coreboot build). Change-Id: Ief79074d73abeefff36a47b2e58ac6b1c047e3a7 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/13675 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins)
2016-02-113rdparty/chromeec: fix build with paths containing "@"Patrick Georgi
Move submodule forward to a newer upstream master to fix the build on paths containing "@", as can happen on jenkins. Change-Id: Ie74012725c379909d5bf631f9cc9969106ca52b8 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13673 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-11cpu/x86/tsc: Compile delay_tsc.c for the bootblock as wellAlexandru Gagniuc
This is needed in a follow-on patch to enable udelay() handling on apollolake, which is a dependency for the console code. Change-Id: I7da6a060a91b83f3b32c5c5d269c102ce7ae3b8a Signed-off-by: Alexandru Gagniuc <alexandrux.gagniuc@intel.com> Reviewed-on: https://review.coreboot.org/13302 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-11util/marvell: Add Marvell doimage utility and dependency in relevant MakefileRuilin Hao
- Add the doimage sources in util/marvell - Add dependency in root makefile - Add dependency in makefile for armada38x soc BUG=chrome-os-partner:47462 TEST=emerge-cyclone coreboot BRANCH=tot Change-Id: I81b30e0865cbd619a41659c3f2819ad3bafc5f24 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 4b2a990150580e0b879a346ed8b71b3765b66bab Original-Change-Id: I7e89b5e96206fde97ce69c296850122fd6c858f9 Original-Signed-off-by: Kefei Yao <kfyao@marvell.com> Original-Reviewed-on: https://chromium-review.googlesource.com/318046 Original-Commit-Ready: Kan Yan <kyan@google.com> Original-Tested-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Furquan Shaikh <furquan@chromium.org> Original-Reviewed-by: Kan Yan <kyan@google.com> Original-Reviewed-by: Yuji Sasaki <sasakiy@chromium.org> Reviewed-on: https://review.coreboot.org/13137 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-11arch/x86: Change how BOOTBLOCK_CUSTOM is selected by defaultAndrey Petrov
Currently x86s select BOOTBLOCK_CUSTOM by default. With this change BOOTBLOCK_CUSTOM is selected only if C bootblock isn't. Change-Id: I218f3b4044175b89697790c82c384b0f85a27ade Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13642 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Allow bootblock code to use CAR_GLOBAL variablesAndrey Petrov
Since cbmem is not initialized in bootblock, CAR_GLOBAL variables can only be accessed directly similar to verstage. Change-Id: Ifc705016290807c49dc8c49b581864cac2ad3f80 Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13641 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-11arch/x86: Reserve space for stack in CAR layoutAndrey Petrov
Some platforms may want to use C code in bootblock so they need writable memory and CAR can be used for it. This change reserves memory in CAR that can be used by bootblock and other CAR stages. Change-Id: I8dec768cf8763dbe235f0ba1339079ebc49cbd9a Signed-off-by: Andrey Petrov <andrey.petrov@intel.com> Reviewed-on: https://review.coreboot.org/13640 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-10cpu/intel/microcode: allow microcode to be loaded in romstageAaron Durbin
The previous usage of the intel microcode support supported using the library under ROMCC and ramstage. Allow for microcode support to be used in normal C-based romstage as well by: 1. Only using walkcbfs when ROMCC is defined. 2. Only using spinlocks if !__PRE_RAM__ The header file now unconditionally exposes the declarations of the supporting functions. Change-Id: I903578bcb4422b4c050903c53b60372b64b79af1 Signed-off-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13611 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10kconfig_lint: update kconfig lint shell scriptsMartin Roth
- Add lint-stable script with just error checking - Enable warnings in addition to errors in non-stable test. - Use git grep if the code is in a git repo now that exclusions are working. - Check for perl, and ask the user to install it if it isn't available. Change-Id: Ie60d21f4ef8a61d879f116eb2056eb805b0a55f2 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13542 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-10chromeos/Kconfig: Remove dependency on GBB_HAVE_BMPFVMartin Roth
This symbol is not defined. Change-Id: I2b0a3fca82d85962fc882f237b70702cab0400db Signed-off-by: Martin Roth <martinroth@chromium.org> Reviewed-on: https://review.coreboot.org/13647 Reviewed-by: Patrick Georgi <pgeorgi@google.com> Tested-by: build bot (Jenkins)
2016-02-10Kconfig: Move defaults for CBFS_SIZEMartin Roth
We want the question for CBFS size to be next to the rom size in the mainboard directory, but that doesn't seem to work for how people want to set the defaults. Instead of having the list of exceptions to the size, just set the defaults at the end of kconfig. - Move the defaults for chipsets not setting HAVE_INTEL_FIRMWARE into the chipset Kconfigs (gm45, nehalem, sandybridge, x4x) - Override the default for HAVE_INTEL_FIRMWARE on skylake. - Move the HAVE_INTEL_FIRMWARE default setting into the firmware Kconfig file - Move the location of the default CBFS_SIZE=ROM_SIZE to the end of the top level kconfig file, while leaving the question where it is. Test=rebuild Kconfig files before and after the change, verify that they are how they were intended to be. Note: the Skylake boards actually changed value, because they were picking up the 0x100000 from HAVE_INTEL_FIRMWARE instead of the 0x200000 desired. This was due to the SOC_INTEL_SKYLAKE being after the HAVE_INTEL_FIRMWARE default. Affected boards were: Google chell, glados, & lars and Intel kunimitsu. Change-Id: I2963a7a7eab037955558d401f5573533674a664f Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13645 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10intel/fsp1_0: Allow the MRC cache to live in a FMAP regionBen Gardner
The new option CONFIG_MRC_CACHE_FMAP will cause fastboot_cache.c to look in the FMAP for a region named "RW_MRC_CACHE" and prevents adding a CBFS file named "mrc.cache". Tested on a fsp_baytail-based board. Change-Id: I248f469c7e3447ac4ec7be32229fbb5584cfd2ed Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/13632 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: York Yang <york.yang@intel.com>
2016-02-10google/veyron_speedy: remove extraneous filePatrick Georgi
veyron_speedy was deduplicated as sub-board into google/veyron, so the addition of chromeos.fmd (identical btw) wasn't useful. Change-Id: Ic4eb6f5fefb0812cae1b9c0475e3a296d7fa65b6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13646 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10google/chromeos: backup -> back upPatrick Georgi
See discussion on https://review.coreboot.org/13600 and https://review.coreboot.org/13601 Change-Id: Ia8274b0b296d6b398f75c0d91a6fded4c5f57e10 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13643 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-10gitconfig: Fix make gitconfig if USE_BLOBS is disabledPatrick Georgi
We tested for the presence of .git/modules/3rdparty, which always exists now because of .git/modules/3rdparty/chrome-ec. Test for .../hooks instead since that's the actual location for the later activities. Change-Id: Id5de9f850413c2bc3525faa6cc549641304c3d47 Signed-off-by: Patrick Georgi <pgeorgi@google.com> Reviewed-on: https://review.coreboot.org/13650 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10buildgcc: enable multilib for gccPatrick Georgi
Make the gcc build system create multiple libgcc.a instances for different ABIs. Change-Id: I1c888bf751bf43566da8927ed0aedb53857363bf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13625 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10arch/arm64: Use correct SPSR.DAIF mask for BL31 and payloadJulius Werner
The PSTATE mask bits for Debug exceptions, external Aborts, Interrupts and Fast interrupts are usually best left unset: under normal circumstances none of those exceptions should occur in firmware, and if they do it's better to get a crash close to the code that caused it (rather than much later when the kernel first unmasks them). For this reason arm64_cpu_init unmasks them right after boot. However, the EL2 payload was still running with all mask bits set, which this patch fixes. BL31, on the other hand, explicitly wants to be entered with all masks set (see calling convention in docs/firmware-design.md), which we had previously not been doing. It doesn't seem to make a difference at the moment, but since it's explicitly specified we should probably comply. BRANCH=None BUG=None TEST=Booted Oak, confirmed with raw_read_daif() in payload that mask bits are now cleared. Change-Id: I04406da4c435ae7d44e2592c41f9807934bbc802 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6ba55bc23fbde962d91c87dc0f982437572a69a8 Original-Change-Id: Ic5fbdd4e1cd7933c8b0c7c5fe72eac2022c9553c Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325056 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13596 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10arch/arm64: mmu: Spot check TTB memory attributesJulius Werner
On ARM64, the memory type for accessing page table descriptors during address translation is governed by the Translation Control Register (TCR). When the MMU code accesses the same descriptors to change page mappings, it uses the standard memory type rules (defined by the page table descriptor for the page that contains that table, or 'device' if the MMU is off). Accessing the same memory with different memory types can lead to all kinds of fun and hard to debug effects. In particular, if the TCR says "cacheable" and the page tables say "uncacheable", page table walks will pull stale entries into the cache and later mmu_config_range() calls will write directly to memory, bypassing those cache lines. This means the translations will not get updated even after a TLB flush, and later cache flushes/evictions may write the stale entries back to memory. Since page table configuration is currently always done from SoC code, we can't generally ensure that the TTB is always mapped as cacheable. We can however save developers of future SoCs a lot of headaches and time by spot checking the attributes when the MMU gets enabled, as this patch does. BRANCH=None BUG=None TEST=Booted Oak. Manually tested get_pte() with a few addresses. Change-Id: I3afd29dece848c4b5f759ce2f00ca2b7433374da Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3947f4bb0abf4466006d5e3a962bbcb8919b12d Original-Change-Id: I1008883e5ed4cc37d30cae5777a60287d3d01af0 Original-Signed-off-by: Julius Werner <jwerner@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/323862 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13595 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-10soc/intel/quark: Report CPU infoLee Leahy
Decode the CPU variants and display the CPU info. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Successful if Quark X1000 is displayed Change-Id: I7234a6d81a48cdd02708b80663147e2b09ba979e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13605 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-10soc/intel/quark: Call FSP SiliconInitLee Leahy
Optionally relocate FSP into DRAM and then call FSP SiliconInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_FSP_ENTRY_POINTS" * Add "select DISPLAY_HOBS" * Optionally add "select RELOCATE_FSP_INTO_DRAM" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * FSP entry points are displayed and * The message "FspSiliconInit returned 0x00000000" is displayed and * The HOBs are displayed correctly and * The message "ERROR - Missing one or more required FSP HOBs!" is not displayed Change-Id: I91e660ea373a8bb00fc97fe8b760347cbfa96b1e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13631 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-10soc/intel/quark: MTRR supportLee Leahy
Add the SoC specific routines to access the MTRR registers. These registers exist in the host bridge and are not accessible via the rdmsr/wrmsr instructions. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_MTRRS" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * The message "FSP TempRamInit successful" is displayed Change-Id: I7c124145429ae1d1365a6222a68853edbef4ff69 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13530 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-10soc/fsp_baytrail: Add support for FSP MR 005Ben Gardner
Baytrail FSP MR 005 adds two new fields: AutoSelfRefreshEnable APTaskTimeoutCnt Add the device tree definitions. Change-Id: I12e2a8b0b5cbeb6b7289cf91f65b25e73007a8de Signed-off-by: Ben Gardner <gardner.ben@gmail.com> Reviewed-on: https://review.coreboot.org/12973 Tested-by: build bot (Jenkins) Reviewed-by: York Yang <york.yang@intel.com>
2016-02-10soc/intel/quark: FSP MemoryInit SupportLee Leahy
Add a dummy fill_power_state routine so that execution is able to reach FSP MemoryInit. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select DISPLAY_HOBS" * Add "select DISPLAY_UPD_DATA" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if: * MemoryInit returns 0 (success) and * The the message "ERROR - Coreboot's requirements not met by FSP binary!" is not displayed Change-Id: I2a116e1e769ac09915638aa9e5d7c58a4aac3cce Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13447 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09ASL: Remove unused modulo recipient.Vladimir Serbinenko
Change-Id: I4b0a3073815ec8d98c2d23cd745f027517b6fa42 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13619 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09stout: Add native gfx initVladimir Serbinenko
Tested during FOSDEM. Change-Id: Id095364d6e4735256e54a68ea9ae677355dd386a Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13532 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09sandybridge: Set all native gfx-related options in northbridge code.Vladimir Serbinenko
In the same time remove few native gfx options which were improperly set and only added dead code to the binary. Change-Id: I4ed3fec03a1655ae0a779c3aa3845de273cb12e1 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13649 Reviewed-by: Martin Roth <martinroth@google.com> Tested-by: build bot (Jenkins)
2016-02-09SeaBIOS: Disable serial console if serial is memory mappedMartin Roth
SeaBIOS only supports standard IO based serial ports. If the serial port being used by coreboot isn't a standard IO serial port, disable the serial console in the SeaBIOS build. Change-Id: I386b46625fca0bd0a5416ed9831f8370c294ed74 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13617 Tested-by: build bot (Jenkins) Reviewed-by: Leroy P Leahy <leroy.p.leahy@intel.com> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09libpayload: use 32bit access when accessing 4byte wide uart registersPatrick Georgi
This fixes serial on rk3288. Change-Id: I3dbf3cc165e516ed7b0132332624f882c0c9b27f Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13636 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
2016-02-09rockchip/rk3288: UART uses 32bit wide registersPatrick Georgi
Change-Id: I084eb4694a2aa8f66afc1f3148480608ac3ff02b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13635 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net>
2016-02-09kconfig_lint: demote 'always defined' errors to warningsMartin Roth
To be able to run this as a lint-stable test, demote these to warnings for now. After the current CONFIG_MAINBOARD_POWER_ON_AFTER_POWER_FAIL issues get fixed, these can be promoted again. Change-Id: I1432980eb0c871fc61c12dcc351f8d46513a7965 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13541 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09vboot2: Store depthcharge graphic assets only in ROPatrick Georgi
These files aren't updated (or updatable), and as such don't need to be copied to the RW sections. Change-Id: Ie78936792ad651fbf8500fc7e34f0899e33a904c Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13633 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09kconfig_lint: Check for IS_ENABLED used on symbols without CONFIG_Martin Roth
This looks at the coreboot codebase for the IS_ENABLED macro, and gives an error if there is a symbol used without the CONFIG_ prefix. This only works for symbols of type bool. A future check will be added for all symbols, but that will take a significant amount of time to run, because each symbol will need to be searched for individually. Change-Id: I92f2de2d231610d1a788da965f21966d89c2f25c Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13538 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09ivy: Add a possiblity for mainboard early init.Vladimir Serbinenko
This is needed for stout EC init. Change-Id: I5c73499c17763229840152a473a2d820802ee2f6 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13535 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09superio/nuvoton/nct5572d: Add PS/2 presence detectPaul Menzel
On certain Super I/O devices, when a PS/2 mouse is not present on the auxiliary channel both channels will cease to function if the auxiliary channel is probed while the primary channel is active. Therefore, knowledge of mouse presence must be gathered by coreboot during early boot, and used to enable or disable the auxiliary PS/2 port before control is passed to the operating system. This is added in commit 448e3863 (drivers/pc80: Add PS/2 mouse presence detect). Update the Nuvoton NCT5572D driver to flag the auxiliary channel as disabled if no device was detected. The code is copied from the Winbond W83667HG-A driver. Note, the ACPI changes are not part of this commit. TEST=Currently, on the ASRock E350M1, PS/2 does not work. With this change, a PS/2 keyboard works fine in SeaBIOS, GRUB in MBR, and Debian GNU/Linux Sid/unstable with Linux 3.19. ``` [ 1.185195] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 1.189110] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.189133] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.189970] mousedev: PS/2 mouse device common for all mice ``` Change-Id: I7f9be348d295e70437bef089d4c2173169f38459 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-on: https://review.coreboot.org/13618 Tested-by: build bot (Jenkins) Reviewed-by: Timothy Pearson <tpearson@raptorengineeringinc.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Kconfig: Move payloads section to payloads/KconfigMartin Roth
Move the payloads section of the kconfig tree out of the top level kconfig file and into a separate Kconfig just for payloads before it starts to get added to. Change-Id: I4f52818f862bf1aeba538c1c6ed93211a78b9853 Signed-off-by: Martin Roth <martinroth@google.com> Reviewed-on: https://review.coreboot.org/13608 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Georgi <pgeorgi@google.com>
2016-02-09chromebooks: Configure Chrome EC board namesPatrick Georgi
For devices with Chrome EC, state the "board" name(s), so they're built as part of the image. A number of EC boards aren't supported in the Chrome EC master branch, they're brought along but commented out, waiting for a port to master in the Chrome EC code base. Change-Id: Ic6ab821de55cf9b4e8b48fe5ebc603adeb8bb28b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13548 Tested-by: build bot (Jenkins) Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org>
2016-02-09Revert "northbridge/intel/peg: Disable unused ports"Nico Huber
This reverts commit 0e06f5bd70b45fd330d8dfb1dc77cce043caf841. It breaks gm45 and also does some magic without being asked too. It disables bridge devices permanently if no device was found on the se- condary bus. In a simple notebook world this might be ok, but it breaks hot-plugging and late detection (if a secondary bus device comes up too slow for the firmware to detect and the OS has to enumerate it). Change-Id: Ia2010640d7c55b0bdd44164b81c75dd4be50410b Signed-off-by: Nico Huber <nico.huber@secunet.com> Reviewed-on: https://review.coreboot.org/13609 Tested-by: build bot (Jenkins) Reviewed-by: Patrick Rudolph <siro@das-labor.org>
2016-02-09Workaround for unused variable warning.Vladimir Serbinenko
Change-Id: I0a0c925509027f98f724d0a4347146f21ac06c02 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13624 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Use temporary variable when storing register into itself.Vladimir Serbinenko
Otherwise it triggers a IASL warning with new IASL. Change-Id: I090ee18df78ea779137ee6797c55b96ea27e6d27 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13623 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Fix HPBA shadowing.Vladimir Serbinenko
Store (HPBA, HPBA) had no effect. Rename one of HPBA to avoid shadowing. Change-Id: I54bfa7bcb3e05c28fe8a257825af56527dbf663e Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13622 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09rx886ex: Fix PBIF reference.Vladimir Serbinenko
PBIF is package and so a scalar can't be stored instead of it. What was meant is probably Index(PBIF, 0) Change-Id: Iddd18e1f165e0f48fd91124200aba5c6b4a5b4bd Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13621 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09ASL: Remove unused local variables.Vladimir Serbinenko
Change-Id: Ifcbb6916b718d41fb9cda537ffdc3e652e13cbbf Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13620 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09stout: Fix ASL warningsVladimir Serbinenko
Change-Id: I1ddf37aa61fe95ad632c35d8041aed02fb1e8c01 Signed-off-by: Vladimir Serbinenko <phcoder@gmail.com> Reviewed-on: https://review.coreboot.org/13533 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mainboard/lenovo: Add support for the Lenovo ThinkPad X220iChristopher Spinrath
The ThinkPad X220i is essentially identical to the ThinkPad X220 but it has a Sandybridge i3 (instead of a Sandybridge i5/i7) CPU and the VGA_BIOS_ID differs. Thus, support is added by using the X220 mainboard directory and setting the VGA_BIOS_ID in Kconfig. Change-Id: I33345a099c617e8c87a1de64b7254b7e7716ca90 Signed-off-by: Christopher Spinrath <christopher.spinrath@rwth-aachen.de> Reviewed-on: https://review.coreboot.org/13594 Tested-by: build bot (Jenkins) Reviewed-by: Alexander Couzens <lynxis@fe80.eu>
2016-02-09intel/kunimitsu: Clean up GPIOs.Pratik Prajapati
Some of the pins are not connected/used on kunimitsu board, this patch will make them "Not connected". Un-used PINS will controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BRANCH=none BUG=none TEST=Build and booted in kunimitsu. Change-Id: Iaf0d4806836648808fb91cfc7807c4c1595a5167 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: a7c25ad8ee0d189178124cff20569152b1053488 Original-Change-Id: I3add625b2bf01223cd389c6a5585827ac62dd0c0 Original-Signed-off-by: Pratik Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/316700 Original-Commit-Ready: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Tested-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13629 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/skylake: Add gpio macro for unused GPIO pinsdavid
Unused PINS will be controlled by GPIO controller (PMODE = GPIO) and GPIO TX/RX will be disabled. BUG=none BRANCH=none TEST=Build and boot lars Change-Id: I3a6fcd2f3462e8e0d1273aa80b1599b76b160825 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 889bfd66dbc918e9fb0ba1b95b63fd7a3bf180d9 Original-Change-Id: I3bf4aa8599255e5382d99810b4c83b4c97c648b6 Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/319964 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com> Original-Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/13628 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09Documentation: Add Quark EDK2 build instructions for LinuxLee Leahy
Document the Linux build instructions for EDK2. TEST=Build EDK2 for Quark on Ubuntu 14.04 Change-Id: I5f87eb2c5879f2fd4dd18880908756089a0c7a51 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13644 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09build system: Build Chrome EC firmware on requestPatrick Georgi
With the Chrome EC's "board" name set in Kconfig, the build system will build and add the EC firmware, too. Available for the EC and the USB PD controller. Change-Id: I017d3a44d6ab8a540fcd198b4b09c35e4b98a8cf Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13547 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09mb/intel/d510mo: Explicitly select NIC on PCI in devicetreeDamien Zammit
While the board configuration still works without this, It's nicer to have the device statically defined since the NIC is hardwired to the board. Change-Id: Ic6682865dd17672c3782bfba9511cd120d1657c1 Signed-off-by: Damien Zammit <damien@zamaudio.com> Reviewed-on: https://review.coreboot.org/13455 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09console: Disable SQUELCH_EARLY_SMP if SMP is not selectedLee Leahy
Add a "depends on SMP" to the value SQUELCH_EARLY_SMP Kconfig value to disable its selection when SMP is not enabled. TEST=Build for Galileo Change-Id: Ia3aa1d2169ed793e1bb26538b74b12347453d5af Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13639 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09soc/intel/quark: Enable Serial PortLee Leahy
Add the code to enable debug serial output using HSUART1: * Enable the code using Kconfig value ENABLE_BUILTIN_HSUART1 * Note that the BIST value is always zero as validated in esram_init.inc * The initial TSC value is currently not saved! Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the pdat.bin files in the location specified by CONFIG_FSP_PDAT_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if serial output is present on HSUART1 at 115200 baud, 8-bit, no parity Change-Id: I7e6181e8b9bc901c3ab236f0b56534850bb6bfd0 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13445 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com>
2016-02-09google/lars: Set I2C[4] port voltage to 1.8vdavid
As the audio card needs 1.8V I2C operation. This patch adds entry into devicetree.cb to set I2C port 4 operate at 1.8V. TEST=Built & booted lars board. Verified that I2C port 4 is operating at 1.8V level Change-Id: Ia77841a26d024785d53251ca4b17afcf77f36a5b Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e431e7acd85f6d7bf9d47f54ed41c48b8276071c Original-Change-Id: Iccc85a5e3bbf2b5362665036e1294a6635e38fbe Original-Signed-off-by: David Wu <David_Wu@quantatw.com> Original-Reviewed-on: https://chromium-review.googlesource.com/321000 Original-Commit-Ready: David Wu <david_wu@quantatw.com> Original-Tested-by: David Wu <david_wu@quantatw.com> Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13627 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09skylake mainboards: Enable backing up VBNV from CMOS to flashDuncan Laurie
Enable the option to back up Vboot non-volatile data from CMOS to flash as these boards have the necessary nvram fmap region and are using vboot2 which does not backup to the TPM. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I7bfe88f2cb7826f3315987aaf56f77df708896ce Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 35df03c5ef24406129cba920ee9af6d55458cd45 Original-Change-Id: Ia7c014fe2768c55941a65ec5605ef4fbc986151c Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324123 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13601 Tested-by: build bot (Jenkins) Reviewed-by: Paul Menzel <paulepanter@users.sourceforge.net> Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Add option to back up VBNV CMOS into flashDuncan Laurie
This adds a new kconfig option that will back up the VBNV data from CMOS to flash, and restore it if the CMOS data is invalid during boot. This allows special flags to not get lost when power is lost, RTC reset is triggered, or CMOS is corrupted. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell: 1-boot and run "enable_dev_usb_boot" 2-reboot and check that it is enabled with crossystem 3-run "mosys nvram clear" 4-reboot and check that it is still enabled Change-Id: I38103d100117da34471734a6dd31eb7058735c12 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 8a356e616c6885d5ae3b776691929675d48a28f9 Original-Change-Id: I06e7ddff7b272e579c704914a0cf8cc14d6994e8 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324122 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13600 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/veyron_rialto: Remove developer mode switchAlexandru M Stan
The developer mode gpio switch on rialto is always hardcoded (through a resistor) as developer mode. We need to ignore it to allow transitions to verified mode with the virtual developer mode stuff. TEST=We can now exit dev mode on rialto Change-Id: I94a949f0973132de5fd008224af79cf612151193 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e78bb8f81eaa9c082e47ad818b64843c2565d00b Original-Change-Id: If11d752d58a5f26fc270ef01b529dad18b4cce46 Original-Signed-off-by: Alexandru M Stan <amstan@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325861 Original-Commit-Ready: Alexandru Stan <amstan@chromium.org> Original-Tested-by: Alexandru Stan <amstan@chromium.org> Original-Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-on: https://review.coreboot.org/13626 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09google/chromeos/vboot2: defer clearing rec mode switchAaron Durbin
Certain platforms query the recovery mode switch more than just within vboot during the boot flow. Therefore, it's important that the first call to get_recovery_mode_switch() is consistent through memory training because certain platforms use the recovery mode switch to take different action for memory training. Therefore, defer the clearing of the rec mode switch to a place when it's known that memory is up and online. BUG=chrome-os-partner:44827 BRANCH=glados TEST=Three finger salute is honored on chell by retraining memory. Change-Id: I26ea51de7ffa2fe75b9ef1401fe92f9aec2b4567 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 6b0de9369242e50c7ff3b164cf1ced0642c7b087 Original-Change-Id: Ia7709c7346d1222e314bf3ac7e4335a63e9a5144 Original-Signed-off-by: Aaron Durbin <adurbin@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/325120 Original-Reviewed-by: Duncan Laurie <dlaurie@chromium.org> Reviewed-on: https://review.coreboot.org/13604 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09intel/kunimitisu: set oem_id oem_table_id fields of acpi_header_tFang, Yang A
kunimitisu platform updated these two fields if maxim codec is detected. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: Icbe0d87f0b46da794db36191b0e12948fe6a2fe6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: f3d07ef07c382a2df140b457273feb3899228e10 Original-Change-Id: Ia6a111d15b851ae3fa918816e13b54ace215a09a Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/324631 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13603 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09nhlt: add api to override oem_id and oem_table_id of acpi_header_tFang, Yang A
This patch added nhlt_soc_serialize_oem_overrides and nhlt_serilalize_oem_overrides to be able to override oem_id and oem_table_id.board file can pass specific string by calling nhlt_soc_serialize_oem_overrides kernel use these two fields to construct a topology binary name if the designate file is not found a default dfw_sst.bin will be used it is optional. BUG=chrome-os-partner:49570 BRANCH=glados TEST=Build & Booted kunimitsu board. Verified that kernel can read new strings. Change-Id: I00b64fb8bb63de601d3116e0b8941057c1efa230 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 374ce08b2d8a2f4e5dd7f51eacb505dbb77fd171 Original-Change-Id: I03623c8ac81efb5a5ea3ec9c6cd604d2e9294022 Original-Signed-off-by: Fang, Yang A <yang.a.fang@intel.com> Original-Reviewed-on: https://chromium-review.googlesource.com/322860 Original-Commit-Ready: Yang Fang <yang.a.fang@intel.com> Original-Tested-by: Yang Fang <yang.a.fang@intel.com> Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13602 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Make vbnv_flash driver safe for CAR usageDuncan Laurie
This modifies the vbnv_flash driver to make it safe for use in cache-as-ram by handling the global variables safely. To make this cleaner all of the variables were moved into one structure and referenced from there. BUG=chrome-os-partner:47915 BRANCH=glados TEST=build and boot on chell using following patches to test backup and restore of vbnv_cmos into flash Change-Id: I3a17fa51cfd754455502ac2e5f181dae35967f2a Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: 48876561fa4fb61e1ec8f92596c5610d97135201 Original-Change-Id: Id9fda8467edcc55e5ed760ddab197ab97d1f3d25 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324121 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13599 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Remove CONFIG_VBNV_SIZE variableDuncan Laurie
The VBNV region size is determined by vboot and is not really configurable. Only the CMOS implementation defined this config variable so switch it to use VBNV_BLOCK_SIZE defined by vboot in vbnv_layout.h instead. This requires updating the broadwell/skylake cmos reset functions to use the right constant. BUG=chrome-os-partner:47915 BRANCH=glados TEST=manually tested on chell Change-Id: I45e3efc2a22efcb1470bbbefbdae4eda33fc6c96 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: e2b803ff3ac30ab22d65d1e62aca623730999a1d Original-Change-Id: I4896a1a5b7889d77ad00c4c8f285d184c4218e17 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324520 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13598 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-09chromeos: Add vbnv wrapper for the different backendsDuncan Laurie
Add a wrapper around the vbnv implementations and call into the different backend functions from there. Also move some of the common functions to the common code and simplify the backend drivers. This will allow some of the code to be re-used so the CMOS backend can backup the data into the flash backend. One side effect of this is that the cache of VBNV was removed from CMOS and EC backends and moved into the VBNV wrapper, but the flash backend also still has a separate cache because it has more state and complexity in the implementation. The wrapper cached data is not used for normal vbnv_read/vbnv_write because some callers need the ability to force a write if the backend storage is cleared (i.e. CMOS clear). BUG=chrome-os-partner:47915 BRANCH=glados TEST=build and boot on chell Change-Id: I4d2e0e99af7e8a44aec77ad9991507401babcca6 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Original-Commit-Id: c30f60434a64f6c0eb9ede45d48ddafff19dd24f Original-Change-Id: Ia97f6607c5ad837b9aa10b45211137221ccb93a0 Original-Signed-off-by: Duncan Laurie <dlaurie@chromium.org> Original-Reviewed-on: https://chromium-review.googlesource.com/324120 Original-Reviewed-by: Aaron Durbin <adurbin@chromium.org> Reviewed-on: https://review.coreboot.org/13597 Tested-by: build bot (Jenkins) Reviewed-by: Martin Roth <martinroth@google.com>
2016-02-08soc/intel/quark: Add TempRamInit supportLee Leahy
Successfully invoke TempRamInit from the FSP binary: * Don't relocate the FSP binary image * Copy the FSP binary into ESRAM * Specify Kconfig values to easily debug ESRAM and TempRamInit code * Specify the FSP binary file location * Specify the FSP binary image ID * Specify where in the flash image the FSP image must reside * Specify the FSP data file location * Specify where to place the FSP data file in the flash image * Specify where in the ESRAM the FSP image must reside Test 1 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_FSP_PDAT_FILE" * Add "select ADD_FSP_RAW_BIN" * Add "select ADD_RMU_FILE" * Add "select ENABLE_DEBUG_LED_FINDFSP" * Place the FSP.bin file in the location specified by CONFIG_FSP_FILE * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Test 2 on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Remove "select ENABLE_DEBUG_LED_FINDFSP" * Add "select ENABLE_DEBUG_LED_TEMPRAMINIT" * Testing is successful if the SD LED is on indicating that the FSP.bin file was properly located, The test fails if the SD LED is flashing. Change-Id: I1e2e413a8573f750c611b0f9df101b2c869a789e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13443 Reviewed-by: Aaron Durbin <adurbin@chromium.org> Tested-by: build bot (Jenkins)
2016-02-08soc/intel/quark: Enable ESRAMLee Leahy
The Quark SoC uses ESRAM instead of cache-as-RAM. This code requires that utils/xcompile/xcompile change the machine architecture from i686 to i586 to ensure that the Quark does not attempt to execute unsupported instructions: * Adjust Makefile.inc to add the RMU to the coreboot image * Add code to enable the ESRAM Directly use the QuarkSocPkg/QuarkNorthCluster/Include/QuarkNcSocId.h file from the EDK2 tree (https://github.com/tianocore/edk2.git) to enable easy differences and correct issues in coreboot that were found in EDK2. Testing on Galileo: * Edit the src/mainboard/intel/galileo/Makefile.inc file * Add "select ADD_RMU_FILE" * Place the rmu.bin file in the location specified by CONFIG_RMU_FILE * Remove power from the board * Apply power to the board * Testing is successful if the SD LED is on indicating that the end of esram_init.inc was reached Change-Id: I91d919da144bb72a5d4c4a8050ffab256632a395 Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13440 Tested-by: build bot (Jenkins) Reviewed-by: FEI WANG <wangfei.jimei@gmail.com> Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-08drivers/intel/fsp1_1: Make fsp_run_silicon_init publicLee Leahy
Remove the "static" declaration from fsp_run_silicon_init and declare the routine in ramstage.h. This routine can be called directly when FSP is already in RAM. TEST=Build and run on Galileo Change-Id: Iddb32d00c5d4447eab5c95b0ad5c40309afa293e Signed-off-by: Lee Leahy <leroy.p.leahy@intel.com> Reviewed-on: https://review.coreboot.org/13630 Tested-by: build bot (Jenkins) Reviewed-by: Aaron Durbin <adurbin@chromium.org>
2016-02-07lint: test for assembler dialect switchesPatrick Georgi
We prefer the default AT&T dialect on x86 Change-Id: I7a5778c82ab5df6e971dfc73e98373893cfeeb92 Signed-off-by: Patrick Georgi <pgeorgi@chromium.org> Reviewed-on: https://review.coreboot.org/13135 Reviewed-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Tested-by: build bot (Jenkins)
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 07:49:23 +0000