summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-09-21mainboard/google/skyrim: Enable wake-on-DPRobert Zieba
Enable wake-on-DP by adding USB mux events to the wake mask. The EC wakes the AP with these events for DP connect/disconnect. BUG=b:294307786 TEST=DP connect/disconnect wakes the DUT appropriately. Change-Id: I864b03d08ce3d756bf4987d886db621d937483ce Signed-off-by: Robert Zieba <robertzieba@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78034 Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2023-09-21soc/amd/mendocino: Do not load MP2 Firmware when in ROKarthikeyan Ramasubramanian
Currently MP2 Firmware is not built into RO firmware section but the soft fuse bit to disable MP2 firmware loading is not set. This causes the device to boot loop during recovery mode. Set the bit to disable MP2 firmware loading in RO. BUG=b:259554520 TEST=Build and boot to OS in Skyrim under both normal and recovery modes. Change-Id: I9e4cf4f72e2d36ad3cc33629ddb501ecdbf5eda9 Signed-off-by: Karthikeyan Ramasubramanian <kramasub@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78023 Reviewed-by: Robert Zieba <robertzieba@google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jon Murphy <jpmurphy@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2023-09-21mb/google/rex/var/karis: Enable PIXA touchpadTyler Wang
Karis uses PIXA touchpad, update related settings. BUG=b:294155897 TEST=(1) emerge-rex coreboot (2) Test on karis, touchpad function works Change-Id: I26e3257485c4abe050de7a79c6d3b72dbd048710 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77517 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-21mb/x11-lga1151-series: Add x11ssw-fKieran Kunhya
This board is similar to x11ssm-f but has a proprietary form factor with NVMe and a single x16 slot (potentially bifurcated to 2x x8) and a x4 slot. Change-Id: I53a0b6012ae64cf1ba4b625f11aaf771637307f3 Signed-off-by: Kieran Kunhya <kieran@kunhya.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77610 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Michael Niewöhner <foss@mniewoehner.de>
2023-09-20arch/arm64/Makefile.inc: Replace HAVE_ACPI_SUPPORT with HAVE_ACPI_TABLESMaximilian Brune
CONFIG_HAVE_ACPI_SUPPORT does not exist. Replace it with HAVE_ACPI_TABLES. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: Icc7c00dc19cae4be13e6c8cc0084a69aed8fb8f5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77977 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-09-20cpu/x86/mtrr/debug: rename variables in display_variable_mtrrFelix Held
Change the name of msr_a and msr_m to the more descriptive msr_base and msr_mask. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6e0010f6d35ccf4288f4e0df8f51ea5f17c98b0f Reviewed-on: https://review.coreboot.org/c/coreboot/+/78007 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-20cpu/x86/mtrr/debug: use MTRR_PHYS_MASKFelix Held
Instead adding 1 to the result of MTRR_PHYS_BASE(index) to get the variable MTRR's mask MSR number, use the MTRR_PHYS_MASK macro. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ieecc57feb25afa83f3a53384e5a286f2e4e82093 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78006 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-20cpu/x86/mtrr/debug: use msr_t parameter in display_mtrr_fixed_typesFelix Held
Now that no local union definitions are used any more, pass the msr data to display_mtrr_fixed_types as an msr_t type parameter instead of a uint64_t parameter. Also rename the parameter from msr to msr_data to be more specific that this parameter is the MSR contents and not the MSR number. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iafde64129acc4bf9f01816de21c7793edfc1a799 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78005 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-20cpu/x86/mtrr/debug: make local MSR variables constFelix Held
In the functions the local MSR variables are only written once by rdmsr calls at the beginning of the function and then only read, so those can be made const. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I1be6a5158c0c06abe128e9394d6001c40a8d4cbb Reviewed-on: https://review.coreboot.org/c/coreboot/+/78004 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-20cpu/x86/mtrr/debug: drop unnecessary MSR unionFelix Held
Commit 407e00dca06e ("include/cpu/msr.h: transform into an union") changed the msr_t type to a union that allows accessing the full 64 bit via the raw element, so there's no need to wrap it again in another union for the full 64 bit access. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I750307297283802021fac19e2cdf5faa12ede196 Reviewed-on: https://review.coreboot.org/c/coreboot/+/78003 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@gmail.com>
2023-09-20soc/intel/alderlake: Hook up the OC watchdogMichał Żygowski
Hook up the OC watchdog common block and initialize it if requested. TEST=Enable watchdog on MSI PRO Z690-A and see the platform resets after some time. Enable the watchdog in driverless mode and see the platform no longer resets and periodic SMI keeps feeding the watchdog. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: I1c2c640d48b7e03ad8cd8d6cdf6aac447e93cd86 Reviewed-on: https://review.coreboot.org/c/coreboot/+/68945 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-20intelblocks/oc_wdt: Consolidate the APIMichał Żygowski
Reduce the OC WDT integration code footprint by consolidating multiple API calls into a single function to be called by SoC. Change-Id: Iba031cd8e0b72cabc4d0d8a216273d763231c889 Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77574 Reviewed-by: Krystian Hebel <krystian.hebel@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-20mb/google/rex/var/karis: Set VPU disable as defaultTyler Wang
BUG=b:299374763 TEST=emerge-rex coreboot Change-Id: I40fc768522e8679337c3b9f5497278e9f4639c3e Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77888 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-20util/superiotool: Tell compiler to use C99 instead of ANSI CNicholas Sudsgaard
Fails to build on musl libc as pci/types.h expects "POSIX types", which are not implemented, instead of stdint.h when using pre-C99 versions. Change-Id: Id1cf5bd72a0b4d76c87dc62c443d02df18ddd3fe Signed-off-by: Nicholas Sudsgaard <devel@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77791 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-20mb/google/rex: Select MIPI pre-prod if MTL pre-prod Si setSubrata Banik
This patch ensures that the `DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` config is enabled if the underlying platform is built with a pre-production SoC (aka `SOC_INTEL_METEORLAKE_PRE_PRODUCTION_SILICON` config is enabled). BUG=b:300652989 TEST=Ensures `DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC` is enabled for google/rex4es aka all variants with ES silicon. Change-Id: Ieda39427915fa3973b832376ec20fc414ac2bedd Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77993 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2023-09-20mb/{google,intel}: Choose platforms with pre-prod Meteor Lake SoCSubrata Banik
The tree contains engineering sample boards, that ship with pre-production Meteor Lake SoC. These boards are not sold. BUG=b:300652989 TEST=Ensure mainboards like google/rex4es and screebo4es have `SOC_INTEL_METEORLAKE_PRE_PRODUCTION_SILICON` config enabled. Change-Id: I1a875a0f1d2c38582f35250ebe645e53599f62de Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77992 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com>
2023-09-20soc/intel/meteorlake: Add configs for pre-production siliconSubrata Banik
Certain Intel Meteor Lake specific features are only enabled in production silicon (not available in early SoC aka pre-production silicon). - SPI usage for production SoC is much optimized compared to pre- production silicon. - MIPI driver requires a way to identify between pre-prod vs prod silicon. This patch adds config options to select the Pre-Production aka Engineering Silicon (ES). The mainboard users can specify which underlying SoC is being used for the target platform. BUG=b:300652989 TEST=No change in the functionality, just added new configs. Change-Id: I60fe11c1151a3a6c290cd0105eb570cb78e81797 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77991 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com>
2023-09-20soc/intel/meteorlake: Enable crashlogPratikkumar Prajapati
Enable SOC_INTEL_CRASHLOG and SOC_INTEL_IOE_DIE_SUPPORT Kconfig options. BUG=b:262501347 TEST=Able to build google/rex. Able to trigger and decode crashlog. Change-Id: I4beef7393090889fde8d67827035c3b57a3dbb34 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77583 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-19soc/amd/picasso: add eMMC MMIO device to devicetreeFelix Held
Add the eMMC MMIO device to the devicetree and make it use the common AMD eMMC driver. Since there is now a device for this in the devicetree, also use this device to determine if the FSP should be told if the eMMC controller is supposed to be disabled. TEST=On Mandolin the eMMC controller both disappears in the Windows 10 device manager and in dmesg on Ubuntu 2022.04 LTS TEST=Morphius with NVMe SSD still works Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5453b69df776d2ce1f3be11e37cd26c8c64f0cd5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77990 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-19soc/amd/cezanne,common: expose eMMC device in ACPI when enabledFelix Held
When the eMMC MMIO device is enabled in the devicetree, it needs to be exposed in ACPI in order for the OS driver to be able to attach to it. The Cezanne eMMC controller isn't used in google/guybrush, so this the code path where the eMMC MMIO device is enabled in the devicetree can't be easily tested. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I69ff79b2d1c6a08cf333a2bb3996931962c2c102 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77989 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-19soc/sifive/fu540: Remove space after a castElyes Haouas
Change-Id: I6a64015326c6ec7e14a0465fe081a2cb4606cdc8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77734 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-19sb/intel/common: Remove space after a castElyes Haouas
Change-Id: Ic3e9570c110d8cded8c00e74fff29cc3a711582e Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77737 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-09-19mb/google/rex/var/screebo: Change GPP_C06 to NCZhongtian Wu
GPP_C06 is the report pin of the touchpanel and has no actual function. Disable this pin to solve the leakage problem. BUG=b:298529441 BRANCH=none TEST=Test success by EE. Change-Id: I13f25788c0258639da4e277e7a15454a08d1599b Signed-off-by: Zhongtian Wu <wuzhongtian@huaqin.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77716 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18soc/amd: introduce SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGIONFelix Held
Add a separate Kconfig option for adding np_region.c to the build. Only the code for Picasso, Cezanne, Mendocino, Phoenix and Glinda call data_fabric_set_mmio_np which is implemented in that file, so only select the new SOC_AMD_COMMON_BLOCK_DATA_FABRIC_NP_REGION Kconfig option for those. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ic49ce039462b52e2c593c7d2fef43efc50901905 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77987 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18drivers/tpm: Make temp test value naming consistentJon Murphy
Make naming convention consistent across all functions return values. BUG=b:296439237 TEST=Boot to OS on Skyrim BRANCH=None Change-Id: If86805b39048800276ab90b7687644ec2a0d4bee Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77536 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-18security/vboot: Add tpm return code to vboot fail callJon Murphy
Add the TPM return code to the vboot fail call to provide additional context. BUG=None TEST=builds Change-Id: Ib855c92d460d1e728718b688ff71cdc6e1d9a84a Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77944 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-09-18drivers/pc80/tpm: Rename tis_probe to tis_initJon Murphy
tis_init calls into tis_probe and returns an error or success, simplify the call stack by removing the current tis_init implementation and renaming tis_probe to tis_init. BUG=None TEST=builds Change-Id: I8e58eda66a44abf5858123cf9bcf620626f1b880 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77943 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Van Patten <timvp@google.com>
2023-09-18libpayload/libcbfs: Add VBOOT_CBFS_INTEGRATION supportJakub Czapiga
If LP_VBOOT_CBFS_INTEGRATION is enabled, then libcbfs will reboot with vboot failure in non-recovery mode on CBFS file hash mismatch. BUg=b:197114807 TEST=Build with VBOOT_CBFS_INTEGRATION enabled and boot on google/ovis4es device Change-Id: Ic0f62212b7217b384e8c4cbd9535fe4243301f8c Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77726 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18libpayload: Add vboot and reboot utility functionsJakub Czapiga
Patch adds: - vboot_fail_and_reboot() for vboot failures handling. - reboot() weak implementation for payloads to implement, used by vboot_fail_and_reboot(). - vboot_recovery_mode_enabled() to check if recovery mode flag is set in vboot context. Implemented for future libcbfs implementation of VBOOT_CBFS_INTEGRATION in libpayload. BUG=b:197114807 TEST=none Change-Id: I53d1955573d54bc56d05f7780c18dcc8ac1fd399 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77725 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-18soc/amd/common/data_fabric_helper: factor out data_fabric_set_mmio_npFelix Held
Factor out data_fabric_set_mmio_np and the helper functions it uses into a separate compilation unit. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I58625c5a038f668f8e30ae29f03402e1e2c4bee3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77986 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-09-18libpayload/vboot: Add vboot context initialization and management codeJakub Czapiga
To fully and easily implement fallback/recovery in libcbfs with vboot support the codebase requires access to vboot context. Moving context management to libpayload allows to avoid unnecessary overhead and code complication and still allows payloads to access it in a way it was designed. Access to this codebase will also allow implementation of e.g. vboot_fail_and_reboot() and other helpful utilities used by coreboot and depthcharge. BUG=b:197114807 TEST=make unit-tests TEST=Build and boot on google/ovis4es with CL:4839296 and VBOOT_CBFS_INTEGRATION enabled Change-Id: Id719be7c4f07251201424b7dc6c1125c6b5756d8 Signed-off-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77635 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2023-09-18soc/amd/common/data_fabric_helper: use data_fabric_get_mmio_base_sizeFelix Held
Use data_fabric_get_mmio_base_size in data_fabric_print_mmio_conf instead of open coding the functionality. This will fix the printing of the MMIO config in the SOC_AMD_COMMON_BLOCK_DATA_FABRIC_EXTENDED_MMIO case which wasn't handled properly before. TEST=Console output from this function doesn't change on Mandolin: === Data Fabric MMIO configuration registers === idx base limit control R W NP F-ID 0 fc000000 febfffff 93 x x 9 1 10000000000 ffffffffffff 93 x x 9 2 d0000000 f7ffffff 93 x x 9 3 0 ffff 90 9 4 fed00000 fed0ffff 93 x x 9 5 0 ffff 90 9 6 0 ffff 90 9 7 0 ffff 90 9 === Data Fabric MMIO configuration registers === idx base limit control R W NP F-ID 0 fc000000 febfffff 93 x x 9 1 10000000000 ffffffffffff 93 x x 9 2 d0000000 f7ffffff 93 x x 9 3 fed00000 fedfffff 1093 x x x 9 4 0 ffff 90 9 5 0 ffff 90 9 6 0 ffff 90 9 7 0 ffff 90 9 Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: If602922648deca0caef23a9999c82acdd128b182 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77984 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2023-09-18security/vboot: Fix return type of extend_pcrs()Yu-Ping Wu
Since vboot_extend_pcr() returns vb2_error_t, the return type of extend_pcrs() should be vb2_error_t too. Also fix an assignment for vboot_locate_firmware(), which returns int instead of vb2_error_t. Change-Id: I1a2a2a66f3e594aba64d33cfc532d1bd88fa305e Signed-off-by: Yu-Ping Wu <yupingso@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77869 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-09-18acpi: Add functions to declare ARM GIC V3 hardwareArthur Heymans
For GICD and GICR a SOC needs to implement 2 callbacks to get the base of those interrupt controllers. For all the cpu GIC the code loops over all the DEVICE_PATH_GICC_V3 devices in a similar fashion to how x86 lapics are added. It's up to the SOC to add those devices to the tree. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I5074d0a76316e854b7801e14b3241f88e805b02f Reviewed-on: https://review.coreboot.org/c/coreboot/+/76132 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18acpi/Makefile.inc: Move code inclusionArthur Heymans
Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I63bbac225662377693ad5f29cc8911494c49b422 Reviewed-on: https://review.coreboot.org/c/coreboot/+/76009 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-09-18arch/arm64: Hook up ACPI table generationArthur Heymans
Linux v6.3.5 is able to detect and use ACPI tables on an out of tree target using hacked version of u-boot to pass ACPI through UEFI. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: I4f60c546ec262ffb4d447fe6476844cf5a1b756d Reviewed-on: https://review.coreboot.org/c/coreboot/+/76071 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2023-09-18soc/amd/common/data_fabric_helper: make some helper functions staticFelix Held
data_fabric_disable_mmio_reg and data_fabric_find_unused_mmio_reg are only used by data_fabric_set_mmio_np in the same file, so make them static and drop the prototype from the header file. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6bf7a868aae2fd01b8adecd3e4cba6ff6d5119af Reviewed-on: https://review.coreboot.org/c/coreboot/+/77985 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Nico Huber <nico.h@gmx.de>
2023-09-18security/vboot: Update vboot context with slot B absenceMichał Żygowski
coreboot offers two vboot schemes VBOOT_SLOTS_RW_A and VBOOT_SLOTS_RW_AB. When VBOOT_SLOTS_RW_AB is not selected then the resulting image is rather not expected to have the FW_MAIN_B FMAP region. When only RW_A region is used, vboot does additional full_reset cycles to try RW_B, even though it does not exist / the build was not configured for two RW partitions. To avoid it, a new vboot context flag has been introduced, VB2_CONTEXT_SLOT_A_ONLY, which can be set right after context initialization to inform vboot about absence of slot B. This will result in less full_reset cycles when vboot runs out of available slots and cause vboot to switch to recovery mode faster. Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Change-Id: Ie123881a2f9f766ae65e4ac7c36bc2a8fce8d100 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75462 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18cbfs: Remove x86 .data section limitation commentJeremy Compostella
With commit b7832de0260b042c25bf8f53abcb32e20a29ae9c ("x86: Add .data section support for pre-memory stages"), this comment is not correct anymore and should be removed. Change-Id: I61597841cd3f90cebe7323a68738f91d6d64b33d Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77988 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: sridhar siricilla <siricillasridhar@gmail.com> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com>
2023-09-18arch/x86: Remove libhwbase and libgfxinit .data symbols from _bssJeremy Compostella
With commit b7832de0260b042c25bf8f53abcb32e20a29ae9c ("x86: Add .data section support for pre-memory stages"), the libhwbase and libgfxinit .data symbols can be moved to the .data section. Change-Id: I302391e7bc8cb4739e5801d360c57776b0e3eff6 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77897 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-09-18clean-up: Remove the no more necessary `ENV_HAS_DATA_SECTION` flagJeremy Compostella
With commit b7832de0260b042c25bf8f53abcb32e20a29ae9c ("x86: Add .data section support for pre-memory stages"), the `ENV_HAS_DATA_SECTION' flag and its derivatives can now be removed from the code. Change-Id: Ic0afac76264a9bd4a9c93ca35c90bd84e9b747a2 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77291 Reviewed-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18mb/google/skyrim: Re-enable USE_SELECTIVE_GOP_INIT for SkyrimMatt DeVillier
This reverts commit dc7cc5bc6edf ("mb/google/skyrim: Disable USE_SELECTIVE_GOP_INIT") but limits the default enablement to Skyrim variant only, to allow for continued testing. BUG=b:271850970 BRANCH=skyrim TEST=build/boot ChromeOS R117+ on google/skyrim, verify no display init failures with feature enabled on cold/warm boots or S0i3 resume. Change-Id: I21c70111a5f407a7e8dd1ad1f2c2759ddb91893e Signed-off-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77964 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-09-18libpayload/drivers/video: Add cursor movement support in consoleEran Mitrani
Add support for moving the console cursor horizontally and vertically. BUG=b:300405745 TEST=Tested using firmware shell on Rex. Signed-off-by: Eran Mitrani <mitrani@google.com> Change-Id: I585add120b559396bc0e28aa972b0ae2a33f1fa8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77900 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-18drivers/crb: Update error messageJon Murphy
Update an invalid error message printed when the timer expires. BUG=None TEST=None BRANCH=None Change-Id: If6d35290e9cb8281cd33892dc052f49277474a59 Signed-off-by: Jon Murphy <jpmurphy@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77713 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Tim Van Patten <timvp@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2023-09-18soc/intel: Update Raptor Lake graphics device IDsBora Guvendik
Added Raptor Lake U graphics device ids. Renamed Raptor Lake U graphics device ids that were marked as Raptor Lake P. Added Raptor Lake P graphics device ids. References: RaptorLake External Design Specification Volume 1 (640555) TEST=Boot to OS Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: I44734f927764f872b89e3805a47d16c1ffa28865 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77898 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18mb/google/dedede/var/taranza: Update USB PLDsReka Norman
Update PLDs to match the port layout: Front (left to right): A4, A3, A2 Back (left to right): C0, A0, A1 BUG=b:264960828 TEST=USB2 and USB3 ports are peered correctly in the kernel: Before: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port2 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port6/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port2/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port6 After: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port7/peer -> ../../../usb2/2-0:1.0/usb2-port2 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port2/peer -> ../../../usb1/1-0:1.0/usb1-port7 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port4 Change-Id: I682a153d6b757e1b66373c622a6fcfbf389184e3 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77877 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-18mb/google/dedede/var/boxy: Update USB PLDsReka Norman
Update PLDs to match the port layout: Front (left to right): C0, A1, A0 Left side: C1 Also enable the usb 3.1 device. BUG=b:264960828 TEST=USB2 and USB3 ports are peered correctly in the kernel: Before: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port6/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port6 After: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port2 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port6/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port2/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port6 (Ports 5 and 6 are not used on boxy but are peered by default) Change-Id: I1563d9eaa27353c8c97225a0a6ecc238e9275ce2 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77876 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com>
2023-09-17soc/intel/denverton_ns: Remove __attribute__(())Elyes Haouas
Change-Id: I9a9926a7298bca0ca5b67a59124b1e0471e179c4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77729 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-17ec/hp/kbc1126: Use packed over attrbute__((packed))Elyes Haouas
Change-Id: Ia4b142a5eac2aab7e4fa6e32ed68c96934ec6c32 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77731 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-09-17soc/intel/meteorlake: Implement cleanup and rearm functionsPratikkumar Prajapati
cpu_cl_cleanup() function checks if the SOC supports storage-off feature. This feature allows to turn off PUNIT SSRAM to save power. Enable the storage-off if it's supported. Enabling it also clears the crashlog records from PUNIT SSRAM. cpu_cl_rearm() function rearms the CPU crashlog. BUG=b:262501347 TEST=Able to build google/rex. Verified both features get asserted. Change-Id: Id9ba0f5db0b5d2bd57a7a21f178ef1e86ca63fae Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77239 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-17soc/intel/common: Add more fields for CPU crashlog headerPratikkumar Prajapati
Add more details in CPU crashlog header structure, such as storage off status and support, re-arm status etc. These fields are used to check of particular feature is supported or not and if supported what is the status of the feature. BUG=b:262501347 TEST=Able to build google/rex. Change-Id: I4242b6043b8f8ad9212780f44ca0448cd2b6b9f8 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77562 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-17soc/intel/common: Add cleanup and rearm functionsPratikkumar Prajapati
Introduce cpu_cl_cleanup() and cpu_cl_rearm() functions for CPU crashlog flow. Also add default weak implementations. BUG=b:262501347 TEST=Able to build google/rex. Change-Id: Iad68d3fdaf7061148b184371f7ef87d83f2b2b38 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77238 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-17soc/intel/common: Make common cpu_cl_clear_data() weakPratikkumar Prajapati
Not all SOC follow the same programming to clear crashlog data. So make common implementation of cpu_cl_clear_data() weak. BUG=b:262501347 TEST=Able to build google/rex. Change-Id: Ic2b4631d57703abff0ab1880fb272ef67bb1b8e9 Signed-off-by: Pratikkumar Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77237 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-16soc/intel/meteorlake: Generate new TME key on each warm bootAnil Kumar
relanding original commit 5013c60a871af8fbce8c38a1c342c454e5b8452f ("soc/intel/meteorlake: Generate new TME key on each warm boot") which was previously reverted by commit 19e66b7c951ce71a1b9bc20158af56e559f8a58f (Revert "soc/intel/meteorlake: Generate new TME key on each warm boot") due to consecutive reboot post warm reset issue. The consecutive reboot post warm reboot issue has been fixed with commit ba7a9eefcf4e571bc73d4be1141f676fc5547057 ("soc/intel/common: Fix invalid MADT entries creation"), hence, reattempting to land the original TME key related patch. BUG=299294328 TEST=Boot up the system, generate kernel crash using following commands: $ echo 1 > /proc/sys/kernel/sysrq $ echo "c" > /proc/sysrq-trigger System performs warm boot automatically. Once it is booted, execute following commands in linux console of the DUT and confirm ramoops can be read. $ cat /sys/fs/pstore/console-ramoops-0 Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: I5d45d265ccef1a7d37669ea22a74b52e2f3ae20d Reviewed-on: https://review.coreboot.org/c/coreboot/+/77902 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Pratikkumar V Prajapati <pratikkumar.v.prajapati@intel.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-16mb/google/rex: Optimize FMD usage for rex variantsSubrata Banik
This patch eliminates the need to maintain separate FMD files for rex variants and rex variants with ISH. It does this by using the BOARD_GOOGLE_MODEL_REX_EC_ISH config to differentiate between ME-RW layout sizes. TEST=Able to build and boot google/rex and google/rex_ec_ish. Change-Id: Ibb6ee9aad9fb68198c6c1a1d5978f77d53a2e3ac Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77895 Reviewed-by: Jakub Czapiga <jacz@semihalf.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-16Revert "mb/google/rex/var/screebo: Reduce TCC from 90°C to 80°C"Subrata Banik
This reverts commit 449c6d981c216e05d5238056f03c7794e43600ec. Reason for revert: (EVT board build does not exhibit shutdown followed by warm reboot) This commit reverts the workaround that limits the TCC activation temperature. The original issue that was reported (shutdown followed by warm reboot) was not seen in the EVT board build, so this change is likely unnecessary. Change-Id: I22adcdee6512e57ad0b6d531f2611e22a95c863e Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77806 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2023-09-16mb/google/brya0: Configure _DSC for camera devicesBora Guvendik
Configure _DSC to ACPI_DEVICE_SLEEP_D3_COLD so that the driver skips initial probe during kernel boot and prevent privacy LED blink. TEST=Boot to OS, check camera LEDs. Signed-off-by: Bora Guvendik <bora.guvendik@intel.com> Change-Id: Ib9375d602171aa5018b1add1deac3021724dc207 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74724 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-09-16soc/intel/alderlake: Remove ACPI_ADL_IPU_ES_SUPPORTJamie Ryu
DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC is added to mipi camera driver to extend the same support for all SoCs, so removing this config from Alderlake SoC code. BUG=None TEST=Build rex and brya to check if the build passes without an error. Change-Id: I5bc23fce89f0ae22b64b90cb12621320cac30d85 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77859 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com>
2023-09-15Documentation: Adjust master -> main branchStefan Reinauer
Some of our documentation still points to the wrong branches Change-Id: Idb72e4f44f294f64eb01c588027d300a53d6fb41 Signed-off-by: Stefan Reinauer <stefan.reinauer@coreboot.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77875 Reviewed-by: Patrick Georgi <patrick@coreboot.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15mb/google/brya/var/craask: Disable C1 PMC mux conn for HDMIRen Kuo
Add fw_config - DB_1A_HDMI for craaskana, and disable C1 PMC mux conn for HDMI. BUG=b:296791122 TEST=build and check HDMI function works on craaskana Change-Id: Ibaa0cd917a23b7f670ecd648765d1eb566edfe61 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77890 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com>
2023-09-15soc/intel/xeon_sp: Add missing HDA devicePatrick Rudolph
Change-Id: Icc7974931a9b3f5b5c7a2ed4df2c668dac0cd684 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77872 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2023-09-15xeon_sp/spr: Fix duplicated definesPatrick Rudolph
Change-Id: Ib365a17652b8531e865fa16eae837c68cbedbca8 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77871 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
2023-09-15vc/intel/raptorlake: Add the FSP v4301.01 headersSean Rhodes
Move the existing FSP 4221.00 headers for Raptor Lake to a subdirectory called 4221.00_google, and select this if the vendor is Google. Add the standard FSP 4301.01 headers to a separate directory, from Intel download #686654, and select this for all other vendors. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Icd99bdee1eeac70dfcaca3d07150d3de6bb83d81 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77101 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15drivers/pc80/tpm: Silence warnings when CONFIG_TPM is unsetArthur Heymans
Add some noop device_operations for devices below chip drivers/pc80/tpm in the case CONFIG_TPM is unset. This avoids the warning "... missing read_resources" when probing all devices for resources. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Ibc37642a8b5f37b95c648141e03025a04ffa36bc Reviewed-on: https://review.coreboot.org/c/coreboot/+/77386 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15mb/google/rex/var/karis: Disable stylus/FP module based on fw_configTyler Wang
There are going to be skus without stylus and fingerprint module. Disable stylus and fingerprint module based on fw_config. BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: I047aae06c4a915d0392edc836757b882a261c178 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77647 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15mb/google/rex/var/karis: Update fw_config settingsTyler Wang
Update fw_config settings for karis: | | | 0 --> STYLUS_ABSENT | | Bit 2 | STYLUS | 1 --> STYLUS_PRESENT | | | | | | Bit 3-5 | AUDIO | 0 --> ALC5650_NO_AMP_I2S | | | | | | Bit 8-9 | MIPI_CAM | 0 --> UF_CAM_HI556 | | | | | | | | 0 --> FP_ABSENT | | Bit 10-11 | FP_MCU | 1 --> FP_MCU_NUVOTON | | | | | | | | 0 --> WIFI_CNVI | | Bit 13 | WIFI_TYPE | 1 --> WIFI_PCIE | BUG=b:290689824 TEST=emerge-rex coreboot Change-Id: I1df30ad32d212a36b8a5bd7324f3eb8045b2795c Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77622 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-15mb/google/dedede/var/dibbi: Swap USB3 ports for A2 and A3Reka Norman
BUG=b:264960828 TEST=USB2 and USB3 ports are peered correctly in the kernel: Before: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port4 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port5 After: $ cd /sys/devices/pci0000:00/0000:00:14.0 $ ls -l $(find . -name peer) ./usb1/1-0:1.0/usb1-port1/peer -> ../../../usb2/2-0:1.0/usb2-port1 ./usb1/1-0:1.0/usb1-port2/peer -> ../../../usb2/2-0:1.0/usb2-port3 ./usb1/1-0:1.0/usb1-port3/peer -> ../../../usb2/2-0:1.0/usb2-port4 ./usb1/1-0:1.0/usb1-port4/peer -> ../../../usb2/2-0:1.0/usb2-port6 ./usb1/1-0:1.0/usb1-port5/peer -> ../../../usb2/2-0:1.0/usb2-port5 ./usb2/2-0:1.0/usb2-port1/peer -> ../../../usb1/1-0:1.0/usb1-port1 ./usb2/2-0:1.0/usb2-port3/peer -> ../../../usb1/1-0:1.0/usb1-port2 ./usb2/2-0:1.0/usb2-port4/peer -> ../../../usb1/1-0:1.0/usb1-port3 ./usb2/2-0:1.0/usb2-port5/peer -> ../../../usb1/1-0:1.0/usb1-port5 ./usb2/2-0:1.0/usb2-port6/peer -> ../../../usb1/1-0:1.0/usb1-port4 Change-Id: I5fe8066e361da62b747464b2ec09bcc6e7dda0fe Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77867 Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-15soc/intel/jasperlake: Add ACPI names for missing USB3 portsReka Norman
BUG=b:264960828 TEST=On dibbi, ACPI tables contain entries for USB 3.4 and 3.5 Change-Id: If3266d356a2deaf42aa0943f85593416d80637ad Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77866 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-15mb/google/rex: add support for UWBEran Mitrani
UWB on Rex will have 2 options to connect to the SoC: 1. Through GSPI1 (muxed with FP) 2. bit-bang over GPP This CL adds GSPI1 option. BB may be added later. BUG=b:263413448, b:263499898 TEST=UWB ranging works on Rex with this CL Change-Id: I93b3bcef84d775866df43d00c934f013e9f85c47 Signed-off-by: Eran Mitrani <mitrani@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/76665 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-15mb/google/brya/var/pujjo: modify wifi sar table for pujjo1eLeo Chou
1. WIFI_SAR_ID_4: AX211 2. WIFI_SAR_ID_5: AX203 (without WiFi-6E) BUG=b:293360900 TEST=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I6c4705d25d927aaefbc8814ea1df3b4c36b30968 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77790 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15mb/google/brask/var/kuldax: Add fw_config probe for USB HubDavid Wu
Kuldax-refresh use USB Hub, add fw_config probe for USB Hub. BUG=b:275335023 BRANCH=brya TEST=Built and check firmware log. Change-Id: Ib983ca527a891718f317336597faad66d076247f Signed-off-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77858 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-15intelblocks/{pmc,p2sb}: Add missing RPL-S PCH IDs for PMC and P2SBMichał Żygowski
The PMC and P2SB IDs for Raptor Lake-S PCH were missing. Add them based on doc 619362 rev 2.2. Change-Id: I5de00adf2d87cf50571abb02b28e7feebdc3911e Signed-off-by: Michał Żygowski <michal.zygowski@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77448 Reviewed-by: Tim Crawford <tcrawford@system76.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com>
2023-09-15soc/intel/cmd/blk/cse: Store fw versions in CMOS memory for cold bootDinesh Gehlot
This patch addresses the increased boot time issue that occurs when ISH store is enabled, such as in the "rex4es_ec_ish" variant. During a cold reboot, the CBMEM memory resets and loses the stored firmware versions. This causes the firmware versions to be fetched again from the CSE, which increases the boot time by about 200 ms. This patch stores a backup of the firmware version in CMOS and updates the CBMEM memory during a cold reboot. BUG=b:280722061 Test=Verified the changes on rex board. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Ibc5a027aa2bb7217e5032f56fece0846783557a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/75755 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-15soc/intel/cmd/blk/cse: Implement APIs to access CMOS CSE FPT versionsDinesh Gehlot
This patch implements APIs to access the CSE FW partition versions in CMOS. The get API allows users to retrieve the current version from CMOS memory. The set API allows users to set the version in CMOS memory. BUG=b:280722061 TEST=APIs verified on rex board. Signed-off-by: Dinesh Gehlot <digehlot@google.com> Change-Id: Idd0ee19575683691c0a82a291e1fd3b2ffb11786 Reviewed-on: https://review.coreboot.org/c/coreboot/+/74995 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Rizwan Qureshi <rizwan.qureshi@intel.com>
2023-09-15soc/intel/meteorlake: Remove the check for INFRSean Rhodes
Remove the check to follow the new flow that commit 9c348a7b7ea3 ("soc/intel/alderlake: Fix processor hang while plug unplug of TBT device") introduced. Processor hang is observed while hot plug unplug of TBT device. BIOS should execute TBT PCIe RP RTD3 flow based on the value of TBT_DMA_CFG_VS_CAP_9[30]. It should skip TBT PCIe RP RTD3 flow, if BIT30 in TBT FW version is not set. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: Ie822b8e1fd7592a31275db8455519c4cc6ac02ad Reviewed-on: https://review.coreboot.org/c/coreboot/+/77456 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-15soc/intel/meteorlake: Remove space after a castElyes Haouas
Change-Id: Ibf28fbdf791e7aa2faa41f3059150bf5ff5d21d1 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77735 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14qualcomm/common: Remove carriage returns from QcLib logJulius Werner
The memory log we get returned by QcLib contains Windows line endings ("\r\n"), while we prefer to have POSIX line endings in the CBMEM console (just "\n"). Filter the '\r' character out when copying that log into the CBMEM console to convert. Signed-off-by: Julius Werner <jwerner@chromium.org> Change-Id: I0652300c2393fbc0b3c9875bb0ca1aa921e59098 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77722 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14x86: Add .data section support for pre-memory stagesJeremy Compostella
x86 pre-memory stages do not support the `.data` section and as a result developers are required to include runtime initialization code instead of relying on C global variable definition. To illustrate the impact of this lack of `.data` section support, here are two limitations I personally ran into: 1. The inclusion of libgfxinit in romstage for Raptor Lake has required some changes in libgfxinit to ensure data is initialized at runtime. In addition, we had to manually map some `.data` symbols in the `_bss` region. 2. CBFS cache is currently not supported in pre-memory stages and enabling it would require to add an initialization function and find a generic spot to call it. Other platforms do not have that limitation. Hence, resolving it would help to align code and reduce compilation based restriction (cf. the use of `ENV_HAS_DATA_SECTION` compilation flag in various places of coreboot code). We identified three cases to consider: 1. eXecute-In-Place pre-memory stages - code is in SPINOR - data is also stored in SPINOR but must be linked in Cache-As-RAM and copied there at runtime 2. `bootblock` stage is a bit different as it uses Cache-As-Ram but the memory mapping and its entry code different 3. pre-memory stages loaded in and executed from Cache-As-RAM (cf. `CONFIG_NO_XIP_EARLY_STAGES`). eXecute-In-Place pre-memory stages (#1) require the creation of a new ELF segment as the code segment Virtual Memory Address and Load Memory Address are identical but the data needs to be linked in cache-As-RAM (VMA) but to be stored right after the code (LMA). Here is the output `readelf --segments` on a `romstage.debug` ELF binary. Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align LOAD 0x000080 0x02000000 0x02000000 0x21960 0x21960 R E 0x20 LOAD 0x0219e0 0xfefb1640 0x02021960 0x00018 0x00018 RW 0x4 Section to Segment mapping: Segment Sections... 00 .text 01 .data Segment 0 `VirtAddr` and `PhysAddr` are at the same address while they are totally different for the Segment 1 holding the `.data` section. Since we need the data section `VirtAddr` to be in the Cache-As-Ram and its `PhysAddr` right after the `.text` section, the use of a new segment is mandatory. `bootblock` (#2) also uses this new segment to store the data right after the code and load it to Cache-As-RAM at runtime. However, the code involved is different. Not eXecute-In-Place pre-memory stages (#3) do not really need any special work other than enabling a data section as the code and data VMA / LMA translation vector is the same. TEST=#1 and #2 verified on rex and qemu 32 and 64 bits: - The `bootblock.debug`, `romstage.debug` and `verstage.debug` all have data stored at the end of the `.text` section and code to copy the data content to the Cache-As-RAM. - The CBFS stages included in the final image has not improperly relocated any of the `.data` section symbol. - Test purposes global data symbols we added in bootblock, romstage and verstage are properly accessible at runtime #3: for "Intel Apollolake DDR3 RVP1" board, we verified that the generated romstage ELF includes a .data section similarly to a regular memory enabled stage. Change-Id: I030407fcc72776e59def476daa5b86ad0495debe Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77289 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2023-09-14cbfstool: Make add-stage support multiple loadable segmentsJeremy Compostella
For x86 eXecute-In-Place (XIP) pre-memory `.data` section support, we have to use an extra segment as the VMA/LMA of the data is different than the VMA/LMA of the code. To support this requirement, this patch makes cbfstool: 1. Allow the load of an ELF with an extra segment 2. Makes add-stage for XIP (cf. parse_elf_to_xip_stage()) write its content to the output binary. To prevent the creation of unsuitable binaries, cbfstool verifies that the LMA addresses of the segments are consecutives. TEST=XIP pre-memory stages with a `.data` section have the `.data` section covered by a second segment properly included right after the code. Change-Id: I480b4b047546c8aa4e12dfb688e0299f80283234 Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77584 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14cbfstool: Make add-stage support multiple ignore sectionsJeremy Compostella
For x86 eXecute-In-Place (XIP) .data section support, cbfstool need to to skip relocation of the .data section symbols in addition to .car.data section symbols. To support this requirement, this patch makes the `-S` option take a multiple section names separated by commas. TEST=With `-S ".car.data .data"`, XIP pre-memory stages with a `.data` section do not have any of the `.car.data` or `.data` section symbols relocated. Change-Id: Icf09ee5a318e37c5da94bba6c0a0f39485963d3a Signed-off-by: Jeremy Compostella <jeremy.compostella@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77560 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2023-09-14soc/intel/xeon_sp/spr: Bump MAX_ACPI_TABLE_SIZE_KBPatrick Rudolph
When using Intel(R) Xeon(R) Platinum 8490H on IBM/SBP1 the platform runs with 480 cores. With 480 cores coreboot needs at least 440KiB for ACPI tables. Bump the config to 512 KiB to have some free space for future changes. Change-Id: I2c0bbc36f45aab921f3189459de4438a0cd5dd1f Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77715 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Naresh <naresh.solanki.2011@gmail.com>
2023-09-14mb/siemens/mc_ehl3: Enable PWM passthrough mode on PTN3460Mario Scheithauer
The connected panel on this mainboard gets the PWM frequency directly from the Elkhart Lake CPU. The PWM controls the brightness of the backlight. Therefore, it is necessary to activate the PWM passthrough mode in the PTN3460 eDP-to-LVDS bridge (see PTN3460 Programming Guide - 5. Configuration Registers). Link to PTN3460 Programming Guide: https://web.archive.org/web/20230908074244/https://www.nxp.com/docs/en/application-note/AN11128.pdf BUG=none TEST=Boot into Linux and change the brightness of the screen Change-Id: Ia0a329426e585b6243c8888806befbe4f6ec2998 Signed-off-by: Mario Scheithauer <mario.scheithauer@siemens.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77856 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jan Samek <jan.samek@siemens.com>
2023-09-14soc/cavium: Use weak over attrbute__((weak))Elyes Haouas
Change-Id: Ia0a6ee85d92f43be6bdae36a13c5dd1a02af3568 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77730 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2023-09-14acpi: Comply with ACPI specification by making _STR unicode stringsCliff Huang
_STR should return Unicode string. From ACPI spec: 6.1.10 _STR (String) The _STR object evaluates to an Unicode string that describes the device or thermal zone. BUG=NA TEST=Check the changed _STR in SSDT to see if Unicode() macro is used Signed-off-by: Cliff Huang <cliff.huang@intel.com> Change-Id: I1f4b55a268c1dadbae456afe5821ae161b8e15a5 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77695 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jérémy Compostella <jeremy.compostella@intel.com>
2023-09-14mb/google/rex: Enable DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC for ES ↵Jamie Ryu
variants This enables DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC for rex variants boards with ES SoC to load pre-production signed IPU FW from IPU kernel driver to make Camera function properly. BUG=None TEST=Build rex and check if SSDT-IPU0 includes the correct value for "is_es" with Meteorlake ES and QS SoC. Change-Id: I407d1932762622652939e8568fe34c704bc3b433 Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77855 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-14drivers/intel/mipi_camera: Add DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOCJamie Ryu
This adds DRIVERS_INTEL_MIPI_SUPPORTS_PRE_PRODUCTION_SOC to provide the option to load pre-production or production signed IPU FW from IPU kernel driver. BUG=None TEST=Build rex and brya to check if the build passes without an error. Change-Id: Ib507bceb6fd85d8ed764df82db400526a10e4d6e Signed-off-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77854 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14mb/google/dedede: Update dibbi ec.h settingsReka Norman
Update the dibbi ec.h so that it's correct for a chromebox. Remove everything related to: - Lid - Battery - Built-in keyboard - AC connect/disconnect - Mode changes BUG=b:294963793 TEST=Boot dibbi and check the APCI tables no longer contain lid and PS/2 keyboard devices. Change-Id: Idfa5adcec308d68555d292fddc1db43c9a64d649 Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77863 Reviewed-by: Sam McNally <sammc@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14mb/google/dedede: Use a separate ec.h for dibbi variantsReka Norman
Dibbi variants are chromeboxes, so they need different settings in ec.h. Add a new dibbi baseboard ec.h and use it for dibbi variants. For now it's identical to the dedede baseboard ec.h. It will be updated in the following CL. BUG=b:294963793 TEST=With the following CL, boot dibbi and check the APCI tables no longer contain lid and PS/2 keyboard devices. Change-Id: I4075041ab8f02026623d1a26a555bee5eb09e77b Signed-off-by: Reka Norman <rekanorman@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77782 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Sam McNally <sammc@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
2023-09-14acpi.c: Add XSDT on QEMUArthur Heymans
Since d8f2dce "acpi.c: Swap XSDT and RSDT for adding/finding tables" XSDT is primarily used to add new tables or to find the S3 resume vector. However with QEMU coreboot does not generate most ACPI tables but takes them from whatever QEMU provides. Qemu only creates an RSDT and lacks an XSDT. To keep the codebase simple with the assumption that XSDT is always present, create an XSDT based on the existing RSDT and update the address in RSDP. Signed-off-by: Arthur Heymans <arthur@aheymans.xyz> Change-Id: Ia9b7f090f55e436de98afad6f23597c3d426bb88 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77385 Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-14chromeos/cse_board_reset.c: Clear EC AP_IDLE flagDerek Huang
When CSE jumps between RO and RW, it triggers global reset so the AP goes down to S5 and back to S0. For Chromebox, when AP goes down to S5 EC set AP_IDLE flag. This cause an issue to warm reset the Chromebox device when it is in recovery mode and powered by USB-C adapter. This patch allows AP to direct EC to clear AP_IDLE flag before trigger reset. BUG=b:296173534 BRANCH=firmware-dedede-136-6.B TEST=Chromebox DUT which is powered by USB-C adapter boots up after warm reset in recovery mode Change-Id: Ib0002c1b8313c6f25d2b8767c60639aed8a4f904 Signed-off-by: Derek Huang <derekhuang@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77632 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Daisuke Nojiri <dnojiri@google.com>
2023-09-14vc/google/chromeos: Move clear_ec_ap_idle() to common codeDerek Huang
Previously the clear_ec_ap_idle() is implemented in cr50_enable_update.c and be called in the file. Move it to common code so that it can be called in cse_board_reset.c TEST=emerge-brask coreboot Change-Id: I2dbe41b01e70f7259f75d967e6df694a3e0fac23 Signed-off-by: Derek Huang <derekhuang@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77631 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Reka Norman <rekanorman@chromium.org>
2023-09-13mb/google/brya: Create dochi variantMorris Hsu
Create the dochi variant of the brya0 reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0). BUG=b:299570339 BRANCH=firmware-brya-14505.B TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_DOCHI Change-Id: Iadeb97bd217278cdf777ae350100313b4345ecf3 Signed-off-by: Morris Hsu <morris-hsu@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77756 Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13mb/google/brya/var/craask: Add audio codec ALC5650Ren Kuo
Add audio codec ALC5650 related settings. BUG=b:289969623 TEST=emerge-nissa coreboot confirm the device in kernel log. Change-Id: I4b8a19e6248bd91cfc31feb84c6108413cd719e2 Signed-off-by: Ren Kuo <ren.kuo@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77701 Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13soc/intel/cmd/blk/cse: Shorten CBMEM field name for better alignmentDinesh Gehlot
This patch shortens the name of the CBMEM field CBMEM_ID_CSE_INFO from "CSE SPECIFIC INFORMATION" to "CSE SPECIFIC INFO" to improve the alignment of the text on the screen. The functionality of the field has not been changed. BUG=NA Test=Boot verified on rex board. Change-Id: I39c716dab7d02d49e7d552cff77d544a1c168433 Signed-off-by: Dinesh Gehlot <digehlot@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77743 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <eric_lai@quanta.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13acpi/soundwire.[ch]: Fix dpn entry array overrunMartin Roth
In soundwire.h, SOUNDWIRE_DPN MIN & MAX are set to 1 and 14. When creating the dpn array, the length was set to MAX - MIN or 13, numbered 0 to 12. When accessing the array, the code was bailing out if a value greater than MAX was trying to be accessed, so the array was able to be overrun by two structure lengths. Fix this problem by: 1) Not subtracting the MIN value when creating the array, which does waste a little space. If anyone wants to refactor the code to fix that, please feel free. 2) Breaking out of the loop when the port is equal to the MAX port number instead of just when it's greater than the max port number. Reported-by: Coverity (CID:1429766 & CID:1429771) Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I0841bb8c9869fe9f53958f05614848785a98b766 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77777 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Tim Wawrzynczak <inforichland@gmail.com>
2023-09-13mb/google/nissa/var/pujjo: Select VBT based on FW_CONFIG for pujjo1eLeo Chou
Select pujjo1e vbt bin files based on PANEL_IVO_BOE field of FW_CONFIG. BUG=b:299852789 TEST=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I344f97331e79e713af47ad743e27794e21be4ca3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77688 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nick Vaccaro <nvaccaro@google.com>
2023-09-13mb/google/brya/var/pujjo: modify fw_config to separate pujjo1e wifi sar tableLeo Chou
Use fw_config for a dedicated pujjo1e intel wifi sar table. BUG=b:293360900 Test=emerge-nissa coreboot Signed-off-by: Leo Chou <leo.chou@lcfc.corp-partner.google.com> Change-Id: I635d3d23384cc4efd85b0c420817dd18a65d2872 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77648 Reviewed-by: Nick Vaccaro <nvaccaro@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13soc/intel/{alderlake,meteorlake}: Remove the dummy PS0 and PS3 methodsSean Rhodes
Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: I8515407eb10e1a74f37ea5a80fa31533c38badec Reviewed-on: https://review.coreboot.org/c/coreboot/+/77455 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2023-09-13soc/intel/{tigerlake,meteorlake}: Check ITBT FW versionSean Rhodes
The ensures that ITBT is ready to operate. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If60404a88208c632cd60e8aaa6ba70494eefbed2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/77454 Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2023-09-13soc/intel/{tigerlake,alderlake,meteorlake}: Start to unify the TCSS ACPISean Rhodes
The ACPI used for Tiger Lake, Alder Lake and Meteor Lake are very similar, so can be moved to shared code. This commit aligns minor difference between then, such as comments and tabs/spaces. Signed-off-by: Sean Rhodes <sean@starlabs.systems> Change-Id: If6554c7ef9e83740d7ec5dcca6a9d7e32fb182db Reviewed-on: https://review.coreboot.org/c/coreboot/+/77453 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 22:11:35 +0000