summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-05-29util/superiotool: Use c11 dialectElyes Haouas
Change-Id: Ic03d9ac883a92d52467d563f048446871b928712 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82678 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-29tree: Use Wcalloc-transposed-args command optionElyes Haouas
GCC-14 documentation says "The first argument to calloc is documented to be number of elements in array, while the second argument is size of each element, so calloc(n, sizeof (int)) is preferred over calloc(sizeof(int), n)." Change-Id: I77b6f4d2eda487b087ba5665b588999633c33e8d Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82658 Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-29tree: Remove unused <stddef.h>Elyes Haouas
Change-Id: I7d7ad562eeff7247b7377b6570d489faee0aeda0 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82669 Reviewed-by: Yu-Ping Wu <yupingso@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com>
2024-05-28mb/system76/tgl: Update VBTs to version 250Tim Crawford
Commit 4c7e97b26a34 ("Update fsp submodule to upstream master branch") included an update to the VBT from 240 to 250, breaking parsing of existing VBTs. After that commit, the VBT was parsed as (from gaze16-3060-b): [DEBUG] PCI: 00:02.0 init [INFO ] GMA: Found VBT in CBFS [INFO ] GMA: Found valid VBT in CBFS [INFO ] framebuffer_info: bytes_per_line: 4096, bits_per_pixel: 32 [INFO ] x_res x y_res: 1024 x 768, size: 3145728 at 0xd0000000 [DEBUG] PCI: 00:02.0 init finished in 6 msecs When the expected output is: [DEBUG] PCI: 00:00:02.0 init [INFO ] GMA: Found VBT in CBFS [INFO ] GMA: Found valid VBT in CBFS [INFO ] framebuffer_info: bytes_per_line: 7680, bits_per_pixel: 32 [INFO ] x_res x y_res: 1920 x 1080, size: 8294400 at 0xd0000000 [DEBUG] PCI: 00:00:02.0 init finished in 6 msecs Generate blobs for the new version using Intel Display Configuration Tool (DisCon) v3.3, based on the existing 237 and 240 VBTs. (For our edk2 payload, the UEFI GOP driver was updated to 17.0.1077.) Tested on all affected systems: - darp7 - galp5 - gaze16-3050 - gaze16-3060 - gaze16-3060-b - lemp10 - oryp8 Tested: - Boot splash displays on screen again - Firmware setup menu is rendered, at correct resolution Change-Id: I918356d9f660b985ee4408ef77544fbd071ab35f Signed-off-by: Tim Crawford <tcrawford@system76.com> Tested-by: Daniel Sutton <daniel@system76.com> Tested-by: Jacob Kauffmann <jacob@system76.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82246 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-28mb/google/brox: Add romstage early graphicsSowmya Aralguppe
Select MAINBOARD_USE_EARLY_LIBGFXINIT for brox to enable SOL image. This patch enables Sign of Life image during MRC training. BUG=b:335369811 TEST=Able to boot to ChromeOS with SOL image. CPU log: [SPEW ] bootmode is set to: 0 (boot with full config) [0.384818] DP PHY mode status not complete [0.388911] DP PHY mode status not complete [0.393197] DP PHY mode status not complete [0.397484] DP PHY mode status not complete [0.401771] DP PHY mode status not complete [0.406057] DP PHY mode status not complete [0.410345] DP PHY mode status not complete [0.414632] DP PHY mode status not complete [0.418916] DP PHY mode status not complete [0.423203] DP PHY mode status not complete [0.427491] DP PHY mode status not complete [0.431777] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. [DEBUG] FMAP: area COREBOOT found @ 1877000 (7901184 bytes) [WARN ] CBFS: 'preram_locales' not found. [ERROR] ux_locales_get_text: preram_locales not found. [DEBUG] FMAP: area RW_ELOG found @ f20000 (16384 bytes) [INFO ] ELOG: NV offset 0xf20000 size 0x4000  elogtool list: 0 | 2024-05-10 02:26:07-0700 | Log area cleared | 4088 1 | 2024-05-10 02:26:07-0700 | Early Sign of Life | MRC Early SOL Screen Shown 2 | 2024-05-10 02:26:51-0700 | Memory Cache Update | Normal | Success 3 | 2024-05-10 02:27:09-0700 | System boot | 4 4 | 2024-05-10 02:27:09-0700 | Firmware Splash Screen | Enabled 5 | 2024-05-10 02:27:11-0700 | System Reset 6 | 2024-05-10 02:27:11-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown 7 | 2024-05-10 02:27:18-0700 | ACPI Enter | S5 8 | 2024-05-10 02:27:36-0700 | System boot | 5 9 | 2024-05-10 02:27:36-0700 | Firmware Splash Screen | Enabled 10 | 2024-05-10 02:27:37-0700 | System Reset 11 | 2024-05-10 02:27:37-0700 | Firmware vboot info | boot_mode=Developer | fw_tried=A | fw_try_count=0 | fw_prev_tried=A | fw_prev_result=Unknown Change-Id: I1d4795825960bc58f8f7ef494b01aa975f3bc346 Signed-off-by: Sowmya Aralguppe <sowmya.aralguppe@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81931 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Shelley Chen <shchen@google.com> Reviewed-by: Ashish Kumar Mishra <ashish.k.mishra@intel.com>
2024-05-28tree: Add smbios_processor_typeElyes Haouas
Change-Id: I46f799ad255993ac42dab11b5c1d2608daa52b42 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82645 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-28mb/google/trulo: Add initial devicetree.cbSubrata Banik
This patch adds initial PCI device entries into the baseboard devicetree.cb. TEST=Able to build google/trulo. Change-Id: I6ec25b98379cf7c8cbdb5be94d9f3ea43878620c Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82652 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Mark unused USB ports as emptySubrata Banik
This patch marks unused USB ports (USB2.0/TCSS) empty to avoid prompting wrong dmesg as below. ``` usb usb2-port3: Cannot enable. Maybe the USB cable is bad? ``` Trulo variants to override the USB ports as per the target board design. TEST=Able to build google/trulo. Change-Id: I6240e66ed3d1a7198c1a526fdca2483910157235 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82651 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28mb/google/trulo: Program EC ranges (host cmd and memory map)Subrata Banik
This patch adds chip config entries for EC host cmd and memory map ranges. TEST=Able to build Google/Trulo. Change-Id: Id4b0f3bba934c8da56b6d7ca8579b46b6cccac28 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82650 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28soc/intel/xeon_sp: Add PD_TYPE_CLUSTERShuo Liu
Add a new proximity type to represent the sub-NUMA cluster (SNC). This patch adds necessary Xeon-SP common code level support for SNC support. When SNC on, each SNC cluster will have a proximity domain. DIMMs and CPU cores are attached to SNC proximity domains instead of the processor proximity domains. With SNC, there are 3 types of proximity domains, PD_TYPE_PROCESSOR, PD_TYPE_GENERIC_INITIATOR and PD_TYPE_CLUSTER. proximity domain type checks in Xeon-SP codes are updated to correctly handle the adding of the new type. This patch doesn't actually enable SNC. To fully enable SNC, SoC codes need to override soc_get_cluster_count(), soc_set_cpu_node_ id() and memory_to_pd(), and call soc_set_cpu_node_id() in its per-CPU init routine. Change-Id: I32558983780f302ff4893901540a90baebf47add Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Ziang Wang <ziang.wang@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81443 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-28include/device: Fix IO resource handling covering 0xFFFFShuo Liu
IO resource creation utils taking 'from' and 'to' as parameters use uint16_t for them, where 'to' equals the resource limit plus 1. When a resource is with a limit of 0xFFFF, the value of 'to' will be clipped to 0x0000 by uint16_t. Fix this problem by use uint32_t and checks the effective range to make sure it no larger than UINT16_MAX + 1. TEST=Build and boot on intel/archercity CRB TEST=Build on intel/avenuecity CRB Change-Id: Ie83045683094d6330c1676809f83acf30175cc90 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82192 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-28soc/intel/xeon_sp: Add domain resource window creation utilsShuo Liu
It might be benefical to have utils for domain resource window creation so that the correct IORESOURCE flags used could be guaranteed. TEST=Build and boot on intel/archercity CRB TEST=Build on intel/avenuecity CRB Change-Id: I1e90512a48ab002a1c1d5031585ddadaac63673e Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82103 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-28tree: Remove unused <stdarg.h>Elyes Haouas
<stdarg.h> header is used to define macros for handling variable argument lists in functions like printf. It does not depend on the string or memory manipulation functions provided by <string.h>. So let follow conventions and include only the necessary headers in each header file. Change-Id: I07ffc65b7feefb8ec4ab8dd268113f9ed8d24685 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82664 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-28spd_bin.h: Use same macro for DDR3 and LPDDR3Elyes Haouas
DDR3 and LPDDR3 share the same PART_NUM and PART_LEN. So use the same macro. This is to prepare SPD de-duplication in following patch. Change-Id: Iea824a847b5072b1cbaa38dc38deae1d484d5b16 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82409 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-28soc/mediatek/mt8188: Decrease OP-TEE image size from 80 MB to 70 MBGavin Liu
The secure buffer shrank from 42 MB to 32 MB, decreasing the total OP-TEE image size from 80 MB to 70 MB. BUG=b:246837563 TEST=emerge-geralt coreboot build coreboot and verify SVP works well Change-Id: I6729e65f83ef994fe59b5bd4ed098e6d3a847695 Signed-off-by: Gavin Liu <gavin.liu@mediatek.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82634 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yidi Lin <yidilin@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Yu-Ping Wu <yupingso@google.com>
2024-05-27acpi/acpi_apic;arch/x86/acpi: better document ACPI_NO_PCAT_8259 caseFelix Held
Both acpi_create_madt_sci_override and acpi_sci_int have special handling for the ACPI_NO_PCAT_8259 case, but those cases weren't exactly obvious, so add a comment with the reason for that. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6dcf59d5ab9226c61e9c4af95a73a07771b71d1 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82643 Reviewed-by: Nico Huber <nico.h@gmx.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/aoostar: Add Alder Lake based AOOSTAR R1 (WTR_R1)Federico Amedeo Izzo
AOOSTAR R1 is a Chinese NAS based on Intel N100 (Alder Lake N), with two 3.5" HDD slots, an M.2 NVMe 2280 SSD slot and a single DDR4-3200 SODIMM slot up to 32GB. It also comes with 2x 2.5Gb Intel NICs, Intel AX200 WiFi + BT and USB-C Alt-DP Power Delivery. Working: - DDR4 RAM (tested with Crucial 16GB 3200MHz CL22) - Automatic FAN control (IT8613E Super I/O) - M.2 NVME slot - 2x SATA ports (Issue on 3.5" HDD, see below) - USB 2.0 ports - USB 3.0 ports - USB-C port with Alt-DP and PD - HDMI / DisplayPort ports - 2x 2.5Gb NICs - WiFi + BT - MicroSD card reader - ASPM (Unavailable on stock) - Linux (Arch Linux, kernel 6.8.7-arch1-1) UEFI booting with EDK2 - Windows 10 UEFI booting with EDK2 Broken: - Power button (OFF->ON broken, ON->OFF works) - 3.5" SATA HDDs (Detected only after reboot) Untested: - Internal audio - S3 My motivation for doing this port is enabling ASPM, as it makes a great difference on idle power consumption (from 8.4W to 5W measured from the wall). The last remaining annoyance of this port is the power button not working. I spent a few hours double checking the Super I/O registers but then I gave up. A workaround for this is to use the "ON after power loss" feature and reconnect the power cord to turn on the board. It's not a big problem for a NAS that will stay ON 24/7. Any hint on the power button or 3.5" HDD issue is welcome. VBT extracted from vendor UEFI firmware version 1AXFE 0.01 x64 (Build date and time 11/29/2023 10:57:44) Compiled with FSP GOP video initialization, using IFD descriptor and ME blob extracted from vendor UEFI firmware (see above). The board can be flashed externally using a 1.8V adapter, I used a CH341a modded for 3.3V I/O. Internal flashing works, as flash is not read/write protected. Patchset 5: Re-enabled dptf, added default options to Kconfig. Patchset 7: Configured USB port mapping and overcurrent, USB3.0 works Patchset 8: Fixed microSD card reader Patchset 13: Change Super I/O Fan configuration to reduce fan noise Change-Id: I9414eb742b6b90459e010b038c1994537e9801a5 Signed-off-by: Federico Amedeo Izzo <federico@izzo.pro> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82010 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/google/ovis/var/deku: Set PsysPL2 value to 178WTony Huang
Adjust setting as recommended by power team. Add ramstage.c in Makefile.inc to set psys_pl2_watts in variant_devtree_update(). Also copy CPU power limit values from ovis baseboard. BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=FSP debug emerge-ovis coreboot intelfsp check overrides setting [INFO] CPU PsysPL2 = 178 Watts [INFO] Overriding PsysPL2 (178) [INFO] Overriding power limits PL1 (mW) (19000,28000) PL2 (mW) (64000, 64000) PL4 (W) (120) Change-Id: I9ce3a8f843a87e81d404778aaf250b876b6801eb Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82200 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Derek Huang <derekhuang@google.com>
2024-05-27mb/google/ovis/var/deku: Increase TDP PL1 value from 28 W to 33 WTony Huang
Adjust settings as recommended by thermal team. Set PL1 max value tdp_pl1_override from 28W to 33W. PL2, PL4 remain the same as CPU default. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: Iad0bca913496dda666ba9bcfe5f6fce1a6396692 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82615 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-27mb/google/ovis/var/deku: Set TCC_offset to 5Tony Huang
Adjust settings as recommended by thermal team. Set tcc_offset value to 5 in devicetree. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I30f54ae6017c54c91ff9b432bba0ebd5bfc65ab9 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82614 Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-27mb/google/rex/var/deku: Update DPTF parametersTony Huang
Adjust settings as recommended by thermal team. Update DPTF parameters based on b:308704811#comment4. BUG=b:308704811 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot chromeos-bootimage built bootleg and verified test result by thermal team Change-Id: I710682771bd0679ae4b44dd43be68f60e8984b2e Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82434 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-27security/memory_clear: fix wrong size of reserved memory rangeKrystian Hebel
The code used to reserve MEMSET_PAE_PGTL_SIZE (20 KiB) for page used for clearing the memory above 4 GiB that was assumed to be 2 MiB page. memset_pae() checks only the alignment and not the size of this region, so no error was reported by it. In most cases this reserved memory in 2-4 MiB range, and because this range isn't usually used by coreboot (architectural stuff is located in lower 1 MiB, coreboot tables and ramstage are close to TOLUM and payload isn't yet loaded when the broken code is executed), it never caused any problems. Change MEMSET_PAE_PGTL_SIZE to MEMSET_PAE_VMEM_SIZE and fix wrong macro definition to reserve properly sized region. Change-Id: I0df15b0d1767196fe70be14d94428ccdf8dbd5d3 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82397 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-27acpi/acpi_apic: use generic MADT IRQ override function for SCI overrideFelix Held
Call acpi_create_madt_irqoverride from acpi_create_madt_sci_override with the correct parameters instead or re-implementing the same functionality. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7e6ee0eed837c2d46da62092b7cc5669dc177d8d Reviewed-on: https://review.coreboot.org/c/coreboot/+/82644 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de>
2024-05-27lint-stable-003-whitespace: Exclude DTB filesMaximilian Brune
This excludes Devicetree blob files from the list of files to check for superfluous whitespaces. A DTB file has recently been added in commit 33079b8174 ("lib/device_tree: Add some FDT helper functions"). Change-Id: Ic25ee5361163446370c530cccefa3bf085895d15 Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82638 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-26Makefile: Warn if flexible array members are not at the endElyes Haouas
Change-Id: Ib704f7659d3b431ce7eebb4432c5b1a4272de3d2 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/77147 Reviewed-by: Maximilian Brune <maximilian.brune@9elements.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-26libpayload: Add x86_64 (64-bit) supportSubrata Banik
This patch introduces x86_64 (64-bit) support to the payload, building upon the existing x86 (32-bit) architecture. Files necessary for 64-bit compilation are now guarded by the `CONFIG_LP_ARCH_X86_64` Kconfig option. BUG=b:242829490 TEST=Able to verify all valid combinations between coreboot and payload with this patch. Payload Entry Point Behavior with below code. +----------------+--------------------+----------------------------+ | LP_ARCH_X86_64 | Payload Entry Mode | Description | +----------------+--------------------+----------------------------+ | No | 32-bit | Direct protected mode init | +----------------+--------------------+----------------------------+ | Yes | 32-bit | Protected to long mode | +----------------+--------------------+----------------------------+ | Yes | 64-bit | Long mode initialization | +----------------+--------------------+----------------------------+ Change-Id: I69fda47bedf1a14807b1515c4aed6e3a1d5b8585 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81968 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-25acpi: add and use defines for LAPIC feature flagsFelix Held
Both the processor local APIC structure and the processor local x2APIC structure use the same flag bit definitions. ACPI spec 6.4 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8101c2ea874c8b12b130dbe9a0a7e0f0d94adffa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82641 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-25acpi: introduce and use ACPI_MADT_PCAT_COMPAT defineFelix Held
The multiple APIC flags table from the ACPI specification version 6.4 was used as a reference. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I36f67ca21465bc8753bb36896ee05669de6de333 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82640 Reviewed-by: Nico Huber <nico.h@gmx.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-25arch/arm64: Implement initial set of SMBIOS tablesBenjamin Doron
Implement the two architectural tables: processor and cache. Note that SoC/board code should override core-thread count and, for spec-compliance, create CBMEM_ID_MEMINFO. Change-Id: Iedae0f26f168bd6d3af866e35d9d39ddb01abc15 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78285 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-05-25arch/arm64: Support calling a trusted monitorBenjamin Doron
Implement support for generating an SMC to call a trusted monitor. Some functions are provided to read the SoC ID from the monitor, if supported. Change-Id: I158db0b971aba722b3995d52162146aa406d1644 Signed-off-by: Benjamin Doron <benjamin.doron@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78284 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24soc/intel/xeon_sp: Move get_cxl_mode out of soc/util.hShuo Liu
get_cxl_mode() is the interface for CXL mode config check used by SoC codes. It could be implemented by mechanisms outside of the SoC codes, e.g. board codes or OCP VPD driver. Move the interface declaration out of soc/util.h to a dedicated header, a.k.a., soc/config.h, so that the implementation codes do not need to include soc/util.h where there are lots of irrelevant definitions. Future SoC config check interfaces could be added to soc/config.h as well. The default weak implementation is moved out of util.c to config.c as well. TEST=Build and boot on intel/archercity CRB Change-Id: Ia0302b0d3fd93c49e1d6f64e8159f59d50f33e20 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82293 Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24device/pci_rom: handle non-remapped VGA_BIOS_IDFelix Held
While the SoC-level defaults for VGA_BIOS_ID are the expected correctly remapped PCI VID/PID of the GPU which matches the PCI VID/DID inside the VBIOS file, some mainboards override the VGA_BIOS_ID setting to the non-remapped PCI ID. This resulted in coreboot not finding the VBIOS file after commit 42f0396a1028 ("device/pci_rom: rework PCI ID remapping in pci_rom_probe"). The proper solution would be to not override this SoC-level config in neither the mainboard code nor some external config file. This however requires adding/using some mechanism to tell SeaBIOS which VBIOS image to use for the GPU device. Once this is implemented, the SoC default for VGA_BIOS_ID shouldn't be overridden any more and this patch can be reverted again. This sort-of reverts parts of commit 42f0396a1028 ("device/pci_rom: rework PCI ID remapping in pci_rom_probe"), but it still tries to find the VBIOS image with the expected remapped PCI ID and only adds trying the non-remapped PCI ID as a fallback when the file with the remapped PCI ID doesn't exist and prints a notice in that case. Before the patch referenced above, using the correct remapped PCI VID/DID resulted in a warning about the CBFS file with the non-remapped name not being found, but first checking the remapped version solves that problem. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7cd8e2036250f4ca2239b04cd070bbf0778b13aa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82592 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-24AUTHORS: Remove whitespaces at end of lineElyes Haouas
Change-Id: I8445ac2e1bfca6cbf9d4d544318eec666948a8c4 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82623 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Held <felix-coreboot@felixheld.de>
2024-05-24AUTHORS: Update with 24.05 release infoMartin Roth
This adds the Authors from the 24.02 tag to the 24.05 tag. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Icb53c62c9a122ccdf2548cc2eebc8b0316a844ef Reviewed-on: https://review.coreboot.org/c/coreboot/+/82617 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24Update 24.05 release notes with final statisticsMartin Roth
The pre-release notes never capture everything, so we need to do an update to finalize them after the release is tagged. This captures on additional SoC added right before the release and updates the statistics. Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: Id3efcd15597e4fee0bdbca76e474974ae32d3263 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82613 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24libpayload: Inject head.S into libc, remove separate classSubrata Banik
Integrate head.S directly into libc and remove all instances of head.o. * Drop 'separate class' entry for head.S. * Drop special treament for head.o inside lpgcc. * Change the .text in `x86/head.S` to `.section .text._entry`. * Drop arch/mock/head.c, initially added as a dummy file. Change-Id: I156d781908fcc38d455bbf9f2c29e5ab95c7775a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82478 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Julius Werner <jwerner@chromium.org>
2024-05-24libpayload: x86: Move Multiboot header to include fileSubrata Banik
This moves the multiboot header into its own include file, simplifying head.S and making it easier to include/exclude the multiboot header based on config options. BUG=b:242829490 TEST=Able to build and boot google/rex. Change-Id: I59a22dfe36044b4dd64a5b028a134be7a7d02a48 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82533 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-24mb/google/trulo: Refactor gpio pad configurationSubrata Banik
This patch tries to simplify the baseboard/variant GPIO programming for Google/Trulo. The idea is to let each variant maintain its own complete GPIO PAD configuration table instead of having a back-and-forth call between baseboard and variants. With this patch coreboot performing GPIO programming is now much simpler where the common code block calls into respective variants and gets the gpio table prior to the pad configuration. BUG=b:334826281 ([TWL] Decouple GPIO from baseboard to variant) TEST=Able to build google/orisa. Change-Id: I4ab88ac094a45c608cd894feb5eeec24b867527a Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82629 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com>
2024-05-24mb/google/nissa: Fix potential null pointer dereferenceSubrata Banik
* Introduce a null check before calling `gpio_padbased_override` in `variant_configure_pads`. * This prevents potential errors in cases where the `variant_gpio_override_table` function returns a null pointer, indicating that there are no override pads to configure. BUG=b:334826281 TEST=Able to avoid hang incase there is no GPIO override. Change-Id: I733210a08091b37eda6e6b0d6924aafd5e7e6280 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82628 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23device: drop unnecessary CHECK_REV_IN_OPROM_NAME optionFelix Held
The CHECK_REV_IN_OPROM_NAME Kconfig option was introduced to solve the problem of the PCI VID/DID combination of the Picasso iGPU not being sufficient information to know which VGA BIOS file to run, so a new function that additionally checks the PCI revision of that device was introduced. Later it turned out that there might be a case where even that isn't sufficient, so the soc_is_raven2() function is used in the remap function to always use the correct VBIOS file. Picasso is the only SoC that selected the CHECK_REV_IN_OPROM_NAME Kconfig option, so all other SoCs are unaffected by this change. Now that we use the VBIOS images with only the PCI VID and DID in the CBFS file name for Picasso, SeaBIOS will find the VBIOS with the same ID as the iGPU in CBFS and we don't need the workaround to add a third VBIOS image via VGA_BIOS_DGPU_* that has the name that SeaBIOS expects. This will result in SeaBIOS now running the VBIOS that has the same PCI VID/DID as the hardware which will be the wrong one in the RV2 silicon showing the PCO silicon PCI VID/DID, but that was also the case with the VGA_BIOS_DGPU_* workaround where the board's Kconfig just selected one of the two possible images during build time and hoped that it was the correct one for that actual hardware. The only board where this patch might cause a regression compared to the old behavior is the AMD Cereme reference board with Pollock APU, but I'm not even sure if any coreboot developer still has one of those boards, so I'm willing to accept that. To properly solve the problem with SeaBIOS using the correct VBIOS file in all cases, we'd need to generate that info during coreboot runtime and somehow pass it to SeaBIOS, but that's out of scope for this patch. TEST=On Mandolin with PCO silicon, the display output in both SeaBIOS and Ubuntu still works. Booting Windows 10 via the pre-built EDK2 payload that I'm using also resulted in the display output working. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ia6de533c536044698d85404427719b8f534870fa Reviewed-on: https://review.coreboot.org/c/coreboot/+/82598 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23soc/intel/xeon_sp/gnr/soc_iio: Remove unused <string.h>Elyes Haouas
Change-Id: I8d4500edaa0739921831a3b04131046599c35a87 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82618 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Shuo Liu <shuo.liu@intel.com>
2024-05-23mb/google/brox/var/brox: Remove mux references from typec portPrashant Malani
The Type-C kernel driver no longer programs the AP mux, as of https://review.coreboot.org/c/coreboot/+/82077. So remove device references to the TCSS Mux control device from the Type-C port driver. This eliminates the following kernel error which was observed as a result of the kernel trying to program muxes it no longer has control over: [ 4.618600] cros-ec-typec GOOG0014:00: Failed to get mux info for port: 0, err = -95 [ 4.618608] cros-ec-typec GOOG0014:00: Configure muxes failed, err = -95 BUG=b:341331428 TEST=Run system reboot; configure mux kernel errors no longer seen. Change-Id: I93e498b12b109c0e649a23a4a49868976a9ee06b Signed-off-by: Prashant Malani <pmalani@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82599 Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/amd/birman/display_card_type.h: add missing includeFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I5208ceeec17051e7849263a4caa0838efd59c044 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82608 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-23mb/amd/birman/display_card_type.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaf4478814e672fb8cfae5ffc4fa89c475f5bb0b2 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82607 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23soc/amd/phoenix/chip_opensil.h: add missing include guardsFelix Held
Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iba17d44772333ed59e3fdde1443a1862bae8e32f Reviewed-on: https://review.coreboot.org/c/coreboot/+/82606 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-23mb/google/brya: Add romstage early graphics for nissaRonak Kanabar
1) Add all changes needed for early graphics 2) select MAINBOARD_USE_EARLY_LIBGFXINIT for nissa The InnoLux (N156HCN-EBA C7) panel is used for the device tree. BUG=b:296433986 TEST=On-screen text message seen during MRC training on Craask Logs: [NOTE ] MRC: no data in 'RW_MRC_CACHE' [SPEW ] bootmode is set to: 0 [0.171409] DP PHY mode status not complete [0.175509] DP PHY mode status not complete [0.179799] DP PHY mode status not complete [0.184087] DP PHY mode status not complete [0.188376] DP PHY mode status not complete [0.192665] DP PHY mode status not complete [0.196954] DP PHY mode status not complete [0.201243] DP PHY mode status not complete [0.205532] DP PHY mode status not complete [0.209821] DP PHY mode status not complete [0.214110] DP PHY mode status not complete [0.218397] DP PHY mode status not complete [INFO ] Informing user on-display of memory training. Change-Id: I33cfc5d1f8c25c344e598befd21c50a78a65275a Signed-off-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78932 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Kapil Porwal <kapilporwal@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/cwwk: Add CWWK CW-ADL-4L-V1.0 boardBrandon Weeks
This board is the CWWK variant based upon Alder Lake with 4 2.5 GbE ports, similar boards are available in other port configurations. As a low cost, relatively high performance board with 4 NICs, it is well suited for networking or 'homelab' tasks. CPU: Intel N100 or N350 Memory: DDR5-4800 SODIMM (max 16 GB) NIC: 4x Intel I226-V 2.5 GbE Expansion: - M.2 2230 E key - M.2 2280 M key - USB 2.0 header - Fan header External ports: - DC power - 4x Ethernet - Display Port - HDMI - 4x USB 2.0 - Micro SD Working: - Boots Debian 12 with SeaBIOS and EDK II payloads - Serial port - External USB ports - DisplayPort / HDMI - 4x Intel I226 2.5 GbE NICs - M.2 ports - Micro SD slot - ACPI S3 Not working / not tested: - Fan (ITE IT8613E) - Audio - S0ix - Internal USB ports VBT extracted from vendor UEFI firmware version ADLN 0.01 x64 (04/04/2023 11:42:38). Change-Id: Ice9174d95c10afc6a22ddd15fb3be4fa38d329be Signed-off-by: Brandon Weeks <me@brandonweeks.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81595 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-23cpu/intel/model_206ax: Program Ivy Bridge defaults for MSR_PKGC_IRTLPatrick Rudolph
Ivy Bridge has lower latencies than Sandy Bridge has. Update MSRs MSR_PKGC_IRTL with values from BWG. Test: Lenovo X220 still boots. Change-Id: Ib307e3b191ba68e016cc348f82e2dccf1dc9ae16 Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/78609 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Arthur Heymans <arthur@aheymans.xyz>
2024-05-23soc/intel/xeon_sp: Dump proximity domain info per typesShuo Liu
Some proximity domain info are type specifics, e.g. base/size/dev are effective for PD_TYPE_GENERIC_INITIATOR, but not for PD_TYPE_PROCESSOR. Dump info per their type. TEST=Build and boot on intel/archercity Change-Id: I7e722a0577bba954efba3e91cc152c758c001d68 Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82292 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-05-23soc/intel/xeon_sp: Move proximity domain setting upShuo Liu
Move proximity domain setting up to ahead of attach_iio_stacks() so that proximity domain info could be ready before attach_iio_stacks()/create_xeonsp_domains(). For example in SPR, is_iio_cxl_stack_res() refers to proximity domain info, and it will be called in create_xeonsp_domains(). TEST=Build and boot on intel/archercity No significant boot log difference except for proximity domain dump info display are moved ahead (with correct contents). Change-Id: I594f0ec0c23e3b62c3bdd917ebf6e45be6e4069e Signed-off-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82267 Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-23mb/google/nissa/var/orisa: Generate RAM ID for Micron MT62F512M32D2DR-031 WT:BAmanda Huang
Add Micron part MT62F512M32D2DR-031 WT:B only for Orisa. DRAM Part Name ID to assign MT62F512M32D2DR-031 WT:B 0 (0000) BUG=b:337178014 BRANCH=firmware-nissa-15217.B TEST=emerge-nissa coreboot Change-Id: I559ed817250c40795e6c613794d4f65c636f5fc5 Signed-off-by: Amanda Huang <amanda_hwang@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82586 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Dtrain Hsu <dtrain_hsu@compal.corp-partner.google.com> Reviewed-by: Ian Feng <ian_feng@compal.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/rex/var/deku: Configure GPIO"Tony Huang
This reverts commit 7088257b1ab715e93506619727e3bf589ea688fb. Reason for revert: Intel suggest is NC only. No need to change anything that isn't broken. Change-Id: I976a85b35c69b03f1bc0ccd2bc7df923e47be815 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82572 Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/prodrive/hermes: Tidy up hda_verb.cAngel Pons
Use the `AZALIA_PIN_CFG_NC(0)` macro instead of `0x411111f0` and tidy up some comments (align them and be consistent with capitalisation). Tested with BUILD_TIMELESS=1, prodrive/hermes remains identical. Change-Id: I1ff1197b1309fc0e5b978d6d36867a3f1a68c67c Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82396 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
2024-05-22mb/amd/birman/devicetree_phoenix_opensil: add USB PHY configFelix Held
Now that we also have the devicetree registers for the USB PHY config in the openSIL case, add the USB PHY config setting from the Phoenix with FSP devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3a0acbf1b9d705dbf09f4480eb35e71e587ddd44 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82585 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-22soc/amd/phoenix/chip.h: add USB PHY configuration for openSILFelix Held
Add the USB PHY configuration structs for the openSIL case, so that those can be configured in the devicetree like in the FSP case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Ied25e90859c4b1bc9b876bed3f3c46358ca36d32 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82584 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/amd/birman/update_devicetree_phoenix_opensil: update DDI1 configFelix Held
Use the now common get_ddi1_type function to update the connector type of the DDI1 port to match the display output extension card plugged into the reference board. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7c51eab0d32e0a1708da415f690689a8ec38dcd3 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82583 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/amd/birman: factor out get_ddi1_typeFelix Held
Both port descriptor files used in the FSP case contain an identical get_ddi1_type implementation, so factor it out into a separate file. This will also allow using the same function in the openSIL case in a following patch. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I6f5b75b9bdbdc67901d157079785c8fa2915bf0c Reviewed-on: https://review.coreboot.org/c/coreboot/+/82582 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22mb/amd/birman/devicetree_phoenix_opensil: add static DDI configurationFelix Held
Add a static DDI port configuration to the devicetree used in the Phoenix with openSIL case. The configuration is taken from the birman_ddi_descriptors array in port_descriptor_phoenix.c. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I7b85b04114591f3e9da183019c98ca2cb08e59da Reviewed-on: https://review.coreboot.org/c/coreboot/+/82581 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22soc/amd/phoenix/chip.h: add DDI configuration for openSILFelix Held
In the FSP case, the DDI descriptors aren't part of the devicetree and are instead retrieved in romstage by calling the mainboard's mainboard_get_dxio_ddi_descriptors function which allows updating the descriptors during romstage where the devicetree is static. In the openSIL case, the DDI configuration is first needed in ramstage, so we can put this info into the devicetree and update it if needed in ramstage. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I3de12ff6af42e38751a3016efa313613677fa87a Reviewed-on: https://review.coreboot.org/c/coreboot/+/82580 Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-22mb/amd/birman/devicetree_phoenix_opensil: remove unexpected '<'Felix Held
Remove the unexpected '<' char at the end of the comment about the PSPP policy config. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Id821351ce3a7a2b7844d8e7478fa3de3227a7da9 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82579 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-05-22soc/amd/phoenix/chipset_*.cb: remove TODOFelix Held
Remove the TODO to update the chipset devicetree for Phoenix, since this has already been done. When re-checking the chipset devicetree, I found conflicting information about the existence of the PCI bridge to an external PCIe port on bus 0 device 1 function 5, but after looking into this, I'm reasonably certain that it either doesn't exist or at least wouldn't be usable, so I won't add that one to the chipset devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I8f0e1540ed45408e86186253d3982a7ba0065ac6 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82578 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-05-22mb/intel/archercity_crb: Fix build for specific configurationsPatrick Rudolph
Guard OCP functions calls to allow builds without OCP drivers. Change-Id: Ie9a82387366a8bb3387bcba3ec7a4c7f0100f78c Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82168 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-22mb/intel/mtlrvp: Include fw_config.c fileAnil Kumar
Update Makefile to include fw_config file for mtlrvp board. Signed-off-by: Anil Kumar <anil.kumar.k@intel.com> Change-Id: Id41cd8b015a796f7a959ceccf85106a48d15ae35 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82559 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Bora Guvendik <bora.guvendik@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-22Revert "mb/google/brox: Update verb table to fix headset detection"Terry Cheong
This reverts commit f867c9c5473156617691d78350c362cd993bfcdd. The new verb table breaks external mic detection on brox. Revert and use old verb tables instead. BUG=b:330433089 BRANCH=main TEST=Verified headset on Brox When connected to audiojack in power_save state of legacy hda driver, headset is detected and audio is resumed. Change-Id: I0d8c092de6166b2c62f5ecc3deaf4960128e6106 Signed-off-by: Terry Cheong <htcheong@chromium.org> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82273 Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Shelley Chen <shchen@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brya/var/nova: Add SOLDERDOWN supportKenneth Chan
Nova will use SOLDERDOWN. Add memory.c to override baseboard. Update dram id table for correct platform parameter. BUG=b:328711879 Change-Id: I6fbce991ef5ab9f0e6216ad1a5af73fcc1996a2a Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82474 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: David Wu <david_wu@quanta.corp-partner.google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21mb/google/brox/var/greenbayupoc: Update verb table from ALC256 to ALC236Wu Garen
On GreenbayPOC, HDA Codec used is ALC236, different with Brox (ALC256) Update to Realtek provided verb table for ALC236 audio codec. BUG=b:336967284 TEST=Verified headset and audio workable on DUT with "rec" and "aplay" command. Change-Id: I9fbe57a0acab20387754f6b6cb5705e34c1c149b Signed-off-by: Wu Garen <wu.garen@inventec.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82413 Reviewed-by: Ivan Chen <yulunchen@google.com> Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21lib/device_tree: Add some FDT helper functionsMaximilian Brune
This adds some helper functions for FDT, since more and more mainboards seem to need FDT nowadays. For example our QEMU boards need it in order to know how much RAM is available. Also all RISC-V boards in our tree need FDT. This also adds some tests in order to test said functions. Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I2fb1d93c5b3e1cb2f7d9584db52bbce3767b63d8 Reviewed-on: https://review.coreboot.org/c/coreboot/+/81081 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-21tests/lib: Factor out file related functionsMaximilian Brune
Signed-off-by: Maximilian Brune <maximilian.brune@9elements.com> Change-Id: I5c22913b35848c5ea32d6805ea081abefd3380bf Reviewed-on: https://review.coreboot.org/c/coreboot/+/82237 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Jakub Czapiga <czapiga@google.com>
2024-05-21soc/intel/meteorlake: Add PsysPL2 configurationTony Huang
psys_pl2_watts is configured in SoC node of devicetree. Value represents Watts. BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=emerge-ovis coreboot Change-Id: I9c4d62b93fc751db9e0ea04e475acb8861a844f8 Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82553 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Subrata Banik <subratabanik@google.com>
2024-05-21mb/google/brya/var/bujia: Add devicetree based on schematicsShon Wang
Add devicetree settings per the schematic. Differences to gladios: 1. remove SD reader 2. remove EMMC setting 3. modify USB port distribution FRONT ------------------------------------------------------- | A3 A1 | | C0 A2 A0 | ------------------------------------------------------- BACK ------------------------------------------------------- | --------------- | | | TX25A | | ------------------------------------------------------- BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: Ia010e99c21e8d6088f6bb873f79dc19cadc9e455 Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81447 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Derek Huang <derekhuang@google.com> Reviewed-by: Paul Menzel <paulepanter@mailbox.org>
2024-05-20crossgcc: Update LLVM from 18.1.5 to 18.1.6Elyes Haouas
Change-Id: Ie087f43e6f60df7b97d7d7b402d3540c3a0a2461 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82552 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-20util/docker: Change Debian suite from Sid to stableMartin Roth
Debian sid is too unstable at this point, and frequently ends up having issues that cause the coreboot-sdk docker image to fail to build. Using stable also better reflects what users will typically be running. Also remove the parameters to quiet the apt-get install command so that if something does break, we can see what happened more easily. Fixes bug 536 Signed-off-by: Martin Roth <gaumless@gmail.com> Change-Id: I41b6464b024df89c114db2cdb9367c0526eb0297 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82411 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-203rdparty/libgfxinit: Update submodule pointerAngel Pons
Update the submodule pointer to current main. This brings in 5 commits: * e096913 connector_info: Fix HDMI/DVI default bytes per color setting * 87469f2 gma config: Add new device IDs for Raptor Lake * 4be2e75 gma: Update transcoder setup for TGL * 4b991bf gfxtest: Drop unnecessary with of ancestor * 17cfc92 tgl plls: Disable warnings about unused variable Change-Id: Ic40edc773ba11ab9a0f9e92057bd687d10b95069 Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82554 Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Ronak Kanabar <ronak.kanabar@intel.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
2024-05-20mb/prodrive/hermes/hda_verb.c: Refactor port B Vref cfgAngel Pons
Refactor the `get_port_b_vref_cfg()` function to only return the variable bits of the value. The NID itself is not connected, and the `misc` field in the verb conveys the Vref value. Change-Id: I5108f5339c5b002403a4e5339da6d52046c8bcbe Signed-off-by: Angel Pons <th3fanbus@gmail.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82395 Reviewed-by: Paul Menzel <paulepanter@mailbox.org> Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-18Libpayload: Rename arch variable _ARCH to _ARCHDIR for consistencySubrata Banik
This commit renames the variable _ARCH to _ARCHDIR in the libpayload build script (lpgcc) to align with the naming convention of other variables used in this file. This change improves code readability and maintainability. Change-Id: Iea4af68e49ab1cd7ec8156a14f8215244e9c0622 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82479 Reviewed-by: Julius Werner <jwerner@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-17mb/google/dedede/var/kracko: Disable un-used C1 port by daughterboardRobert Chen
Probe C1 port in devicetree and disable un-used C1/A1 port by FW_CONFG. BUG=b:339534479 BRANCH=firmware-dedede-13606.B TEST=emerge-dedede coreboot chromeos-bootimage flash and check boot log on DUT. Change-Id: I944ff6f2fa712e7579ed1c9879f75835adc3ac4c Signed-off-by: Robert Chen <robert.chen@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82263 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com> Reviewed-by: Karthik Ramasubramanian <kramasub@google.com>
2024-05-17mb/google/brask/var/nova: Remove unused retimerKenneth Chan
Remove unused setting for retimer. BUG=b:328711879 Change-Id: I48d8680d43a07aa3408dfbf5b25b568c2b51b343 Signed-off-by: Kenneth Chan <kenneth.chan@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82475 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-17cr50: Replace "cr50" to "GSC" in debug messagesTyler Wang
The cr50.c file currently prints "cr50" in debug messages no matter the system is using Cr50 or Ti50. This can be confusing for developers. This patch replaces "cr50" with "GSC" in debug messages. Using "GSC" makes the messages more clear and easier to search via `grep`. BUG=none TEST=Build and test on karis Change-Id: I21f66cf8b608ca4e4dc82d7a55a851ec996c8bb3 Signed-off-by: Tyler Wang <tyler.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82420 Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Yu-Ping Wu <yupingso@google.com> Reviewed-by: Jon Murphy <jpmurphy@google.com>
2024-05-16mb/intel/beechnutcity_crb: Add GNR/SRF-SP 2S server board Beechnut CityShuo Liu
Beechnut City CRB is the 2 socket reference board for 6th Gen Xeon-SP SP SoCs (Granite Rapids SP and Sierra Forest SP). This patch initially sets the code set up as a compilation target with GNR N-1 FSP, and with basic feature supports (Integrated IO Controller (IIO) configuration, BMC, UART, HPET). TEST=Build on intel/beechnutcity CRB Change-Id: I3f6a0fb97b62baadb438fb9f11fdd78fccb3f89a Signed-off-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Gang Chen <gang.c.chen@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81322 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-16mb/intel/avenuecity_crb: Add GNR/SRF-AP 2S server board Avenue CityGang Chen
Avenue City CRB is the 2 socket reference board for 6th Gen Xeon-SP AP SoCs (Granite Rapids AP and Sierra Forest AP). This patch initially sets the code set up as a compilation target with GNR N-1 FSP, and with basic feature supports (Integrated IO Controller (IIO) configuration, BMC, UART, HPET). TEST=Build on intel/avenuecity CRB Change-Id: I64fdd5388aadf7732f6d3daa600c1455d3672a46 Signed-off-by: Gang Chen <gang.c.chen@intel.com> Co-authored-by: Shuo Liu <shuo.liu@intel.com> Co-authored-by: Jincheng Li <jincheng.li@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81319 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-16soc/intel/xeon_sp/gnr: Add IIO config utilsGang Chen
Add IIO configuration utils shared in GNR boards to handle the complex IIO configuration settings. Change-Id: If7146761db6f73a0c4b0d31b010c0d30a42bf690 Signed-off-by: Gang Chen <gang.c.chen@intel.com> Co-authored-by: Shuo Liu <shuo.liu@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81318 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Lean Sheng Tan <sheng.tan@9elements.com>
2024-05-16chromeec/ec_acpi: Convert TK_DICTATE to ps2_action_keyAseda Aboagye
When support for the dictation key was added in commit f2782b8328d5 (acpigen_ps2_keybd: Add support for dictation key), I had failed to include this portion of the change in that commit. The top row key of `TK_DICTATE` needs to be converted to the ps2_action_key. This commit simply adds that mapping so that it can be translated. BUG=b:333101631 TEST=Flash DUT that emits a scancode for a dictation key, verify that it is mapped to KEY_DICTATE in the Linux kernel using `evtest`. Change-Id: I1be8c0a96931cca36e6bbbfa0be7d36c4cd93768 Signed-off-by: Aseda Aboagye <aaboagye@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82274 Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Caveh Jalali <caveh@chromium.org> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-16mb/amd/birman/update_devicetree_phoenix_opensil: use common header fileFelix Held
Instead of including stub/mpio/chip.h, include chip/mpio/chip.h that will include the correct implementation to be able to use the same file with both the openSIL stub and the actual openSIL implementation glue code. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Iaae26a0dfe0ba96842e72582c06f1b0b3f29871c Reviewed-on: https://review.coreboot.org/c/coreboot/+/82472 Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-16mb/google/rex: Remove redundant VPU enablement codeSubrata Banik
This patch removes VPU enablement code that is no longer needed because the VPU is already enabled by default in the baseboard devicetree. BUG=b:332488817 TEST=Able to see VPU PCI device in lspci list after booting google/screebo to OS Change-Id: I94de92e970be1548068ed4e19309a95129f041ff Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82423 Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-16mb/google/rex: Enable VPU device for Rex/Ovis baseboardSubrata Banik
This patch enables the Versatile Processing Unit (VPU) by default for Rex/Ovis baseboard. VPU is a dedicated AI engine that is included in the 14th generation "Meteor Lake" Core processors. The VPU is designed to efficiently run AI models directly on the system on chip (SoC). There is no power regression observed while keeping the VPU default enabled to run AI models natively hence, this patch enables the VPU by default. BUG=b:332488817 TEST=Able to see VPU PCI device in lspci (0:11:0) list after booting google/screebo to OS. Change-Id: I8b3521c8ec613b002f971eaf9d346927fe8cd656 Signed-off-by: Subrata Banik <subratabanik@google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82422 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Sumeet R Pawnikar <sumeet.r.pawnikar@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Jamie Ryu <jamie.m.ryu@intel.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-16include/device/pci_ids.h: Update TWL device IDsSaurabh Mishra
Set lowercase hex format for IGD DIDs. BUG=b:326901448 TEST=Build tivviks and verify the IGD IDs. Change-Id: I1299512d1c48eba854fea2ec394cef40d44a87d7 Signed-off-by: Saurabh Mishra <mishra.saurabh@intel.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82414 Reviewed-by: V Sowmya <v.sowmya@intel.com> Reviewed-by: Angel Pons <th3fanbus@gmail.com> Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-16mb/google/rex/var/baseboard/ovis: Support CPU power limits per variantTony Huang
There is no direct way to override CPU default power_limits for different SKUs. This CL add structure variant_get_soc_power_limit_config() for variants to define and configure the values of soc_power_limits_config for current CPU SKU. Variants can override these values i.e. pl1, pl2, psyspl2 in variant_devtree_update(). BUG=b:320410462 BRANCH=firmware-rex-15709.B TEST=FSP debug emerge-ovis coreboot intelfsp check overrides setting Change-Id: Ib60fa4e3fc502d0aeb0c94ad46ba5a55b4dd027c Signed-off-by: Tony Huang <tony-huang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82199 Reviewed-by: Subrata Banik <subratabanik@google.com> Reviewed-by: Eric Lai <ericllai@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-16mb/google/brask/var/bujia: Update gpio tableShon Wang
Based on latest schematic to update the gpio table. BUG=b:327549688 TEST= USE="-project_all project_bujia" emerge-brask coreboot Change-Id: I3d01e3b9eaef72d9e143f5163ee49d8c8f455b5f Signed-off-by: Shon Wang <shon.wang@quanta.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82412 Reviewed-by: Derek Huang <derekhuang@google.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-15cpu/x86/pae/pgtbl.c: remove dead paging_identity_map_addr()Krystian Hebel
This function had roughly the same use (except PAT) as part of memset_pae(), however the latter is able to make use of PAE and map physical memory located above 4 GB. Remove paging_identity_map_addr() to avoid semi-duplicated code. The function has been unused since CB:26745. Change-Id: I7a4ebd84a6f5d222c3b2c6c6e3d26d6464cf01b8 Signed-off-by: Krystian Hebel <krystian.hebel@3mdeb.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82248 Reviewed-by: Sergii Dmytruk <sergii.dmytruk@3mdeb.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-15Doc/releases: List toolchain updates in coreboot-24.08-relnotesElyes Haouas
Report upgraded version for ACPICA, CMake, nasm, LLVM and GCC. Change-Id: I93a9ae4a2f4c3403a6e8c9a8b7aca74b996e7db8 Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82410 Reviewed-by: Felix Held <felix-coreboot@felixheld.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Angel Pons <th3fanbus@gmail.com>
2024-05-15payload/external/edk2: Explicitly define the build arch as X64Nicholas Sudsgaard
Upstream commit 11ad164bce (UefiPayloadPkg: Make UPL build script arch agnostic, 2024-02-22) changes the build script's behavior to not assume the arch. Without defining BUILD_ARCH, the build script will not function properly and results in the payload failing to build. Both UefiPayload and Universal Payload can only be built in X64. Change-Id: Icd942d0c15a99231d09f9cbdc5eb48333b6aa6e5 Signed-off-by: Nicholas Sudsgaard <devel+coreboot@nsudsgaard.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80883 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Sean Rhodes <sean@starlabs.systems>
2024-05-15Add 24.08 release notes templateJason Glenesk
In preparation for the upcoming release, add the template for the 24.05 release and update index.md. Change-Id: I733f541a2d6e556c82aff1656fe7f79ae3673ba7 Signed-off-by: Jason Glenesk <jason.glenesk@amd.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82400 Reviewed-by: Matt DeVillier <matt.devillier@gmail.com> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-15mb/amd/birman: add function to update MPIO config in devicetreeFelix Held
Phoenix 2 has less PCIe lanes than Phoenix, so some of the lane end numbers need to be adjusted to take that into account. When the Kconfig options WLAN01 or WWAN01 are set, either the WLAN or the WWAN card uses both PICe lanes that are available for those two devices, so the MPIO descriptor information the devicetree needs to be updated accordingly and the bridge to the PCIe port that doesn't have any lane left needs to be disabled. Two other PCIe devices will be disabled when the corresponding Kconfig options ENABLE_EVAL_CARD and DISABLE_DT_M2 have the value that results in the device being disabled via some GPIO driven by the EC. Since the code is specific to the openSIL case, only include it in the build in the CONFIG_BOARD_AMD_BIRMAN_PHOENIX_OPENSIL case. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: I23c14cc03980ea1e39f7e5aec551b975c237e487 Reviewed-on: https://review.coreboot.org/c/coreboot/+/82106 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com> Reviewed-by: Varshit Pandya <pandyavarshit@gmail.com>
2024-05-15mb/amd/birman/devicetree_phoenix_opensil: add stub MPIO chipsFelix Held
Add the stub MPIO chips that contain the PCIe engine configuration for the external PCIe interfaces to the devicetree. Birman's port_descriptors_phoenix.c was used as a reference. The static configuration in the devicetree assumes that the default WLAN0_WWAN0 is selected; for the other cases we'll still need to fix up things accordingly in the mutable devicetree. The WLAN01 and WWAN01 cases still need to be handled in a follow-up patch. Since openSIL currently doesn't use the info from the gpio_group struct element, but deasserts both PCIe reset pins GPIO 26 and 27, the gpio_group isn't specified in the chip configuration in the devicetree. Signed-off-by: Felix Held <felix-coreboot@felixheld.de> Change-Id: Icabe60322d46c1195284dd77ec39f9d143e3d2cb Reviewed-on: https://review.coreboot.org/c/coreboot/+/81101 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Matt DeVillier <matt.devillier@amd.corp-partner.google.com>
2024-05-15mb/google/brya: Create orisa variantEricKY Cheng
Create the orisa variant of the nissa reference board by copying the template files to a new directory named for the variant. (Auto-Generated by create_coreboot_variant.sh version 4.5.0.) BUG=b:337178014 BRANCH=None TEST=util/abuild/abuild -p none -t google/brya -x -a make sure the build includes GOOGLE_ORISA Change-Id: I0cd8d763ffd8864b455a7f8909e95f6aee8bb23e Signed-off-by: EricKY Cheng <ericky_cheng@compal.corp-partner.google.com> Reviewed-on: https://review.coreboot.org/c/coreboot/+/82241 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Amanda Hwang <amanda_hwang@compal.corp-partner.google.com> Reviewed-by: Dinesh Gehlot <digehlot@google.com> Reviewed-by: Eric Lai <ericllai@google.com>
2024-05-15util/crossgcc: Update GCC from 13.2 to 14.1.0Felix Singer
Change-Id: Idf5912d1fcdfabab7fe006b7e0cd4ebd25c07d09 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81683 Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-05-15util/crossgcc: Update LLVM from 17.0.6 to 18.1.5Lennart Eichhorn
Change-Id: I03a44e0c23a925396f614f282882405dc886ba58 Signed-off-by: Lennart Eichhorn <lennarteichhorn@googlemail.com> Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/80314 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Martin L Roth <gaumless@gmail.com>
2024-05-15crossgcc: upgrade nasm from 2.16.01 to 2.16.03Elyes Haouas
Remove the patch since it was picked from master before and thus it's included in the new release. Change-Id: I70408b189b974f8abaadc66f0c809a1dbe10504b Signed-off-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81900 Reviewed-by: Martin L Roth <gaumless@gmail.com> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Tested-by: build bot (Jenkins) <no-reply@coreboot.org>
2024-05-14util/crossgcc: Update ACPICA from 20230628 to 20240321Felix Singer
Change-Id: I41f56ba58af51b1ec1d7554fb35a49ccf9e778f6 Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81671 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de> Reviewed-by: Elyes Haouas <ehaouas@noos.fr>
2024-05-14util/crossgcc: Update CMake from 3.28.3 to 3.29.3Felix Singer
Change-Id: Iaf2d4f579d987fbfd4187ae41c1be5cec55e0e8e Signed-off-by: Felix Singer <felixsinger@posteo.net> Reviewed-on: https://review.coreboot.org/c/coreboot/+/81672 Tested-by: build bot (Jenkins) <no-reply@coreboot.org> Reviewed-by: Elyes Haouas <ehaouas@noos.fr> Reviewed-by: Felix Singer <service+coreboot-gerrit@felixsinger.de>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-25 09:12:30 +0000